summaryrefslogtreecommitdiffstats
path: root/drivers/platform/x86/winmate-fm07-keys.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/platform/x86/winmate-fm07-keys.c')
-rw-r--r--drivers/platform/x86/winmate-fm07-keys.c189
1 files changed, 189 insertions, 0 deletions
diff --git a/drivers/platform/x86/winmate-fm07-keys.c b/drivers/platform/x86/winmate-fm07-keys.c
new file mode 100644
index 0000000000..465ffad81a
--- /dev/null
+++ b/drivers/platform/x86/winmate-fm07-keys.c
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Driver for the Winmate FM07 front-panel keys
+//
+// Author: Daniel Beer <daniel.beer@tirotech.co.nz>
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/dmi.h>
+#include <linux/io.h>
+
+#define DRV_NAME "winmate-fm07keys"
+
+#define PORT_CMD 0x6c
+#define PORT_DATA 0x68
+
+#define EC_ADDR_KEYS 0x3b
+#define EC_CMD_READ 0x80
+
+#define BASE_KEY KEY_F13
+#define NUM_KEYS 5
+
+/* Typically we're done in fewer than 10 iterations */
+#define LOOP_TIMEOUT 1000
+
+static void fm07keys_poll(struct input_dev *input)
+{
+ uint8_t k;
+ int i;
+
+ /* Flush output buffer */
+ i = 0;
+ while (inb(PORT_CMD) & 0x01) {
+ if (++i >= LOOP_TIMEOUT)
+ goto timeout;
+ inb(PORT_DATA);
+ }
+
+ /* Send request and wait for write completion */
+ outb(EC_CMD_READ, PORT_CMD);
+ i = 0;
+ while (inb(PORT_CMD) & 0x02)
+ if (++i >= LOOP_TIMEOUT)
+ goto timeout;
+
+ outb(EC_ADDR_KEYS, PORT_DATA);
+ i = 0;
+ while (inb(PORT_CMD) & 0x02)
+ if (++i >= LOOP_TIMEOUT)
+ goto timeout;
+
+ /* Wait for data ready */
+ i = 0;
+ while (!(inb(PORT_CMD) & 0x01))
+ if (++i >= LOOP_TIMEOUT)
+ goto timeout;
+ k = inb(PORT_DATA);
+
+ /* Notify of new key states */
+ for (i = 0; i < NUM_KEYS; i++) {
+ input_report_key(input, BASE_KEY + i, (~k) & 1);
+ k >>= 1;
+ }
+
+ input_sync(input);
+ return;
+
+timeout:
+ dev_warn_ratelimited(&input->dev, "timeout polling IO memory\n");
+}
+
+static int fm07keys_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct input_dev *input;
+ int ret;
+ int i;
+
+ input = devm_input_allocate_device(dev);
+ if (!input) {
+ dev_err(dev, "no memory for input device\n");
+ return -ENOMEM;
+ }
+
+ if (!devm_request_region(dev, PORT_CMD, 1, "Winmate FM07 EC"))
+ return -EBUSY;
+ if (!devm_request_region(dev, PORT_DATA, 1, "Winmate FM07 EC"))
+ return -EBUSY;
+
+ input->name = "Winmate FM07 front-panel keys";
+ input->phys = DRV_NAME "/input0";
+
+ input->id.bustype = BUS_HOST;
+ input->id.vendor = 0x0001;
+ input->id.product = 0x0001;
+ input->id.version = 0x0100;
+
+ __set_bit(EV_KEY, input->evbit);
+
+ for (i = 0; i < NUM_KEYS; i++)
+ __set_bit(BASE_KEY + i, input->keybit);
+
+ ret = input_setup_polling(input, fm07keys_poll);
+ if (ret) {
+ dev_err(dev, "unable to set up polling, err=%d\n", ret);
+ return ret;
+ }
+
+ /* These are silicone buttons. They can't be pressed in rapid
+ * succession too quickly, and 50 Hz seems to be an adequate
+ * sampling rate without missing any events when tested.
+ */
+ input_set_poll_interval(input, 20);
+
+ ret = input_register_device(input);
+ if (ret) {
+ dev_err(dev, "unable to register polled device, err=%d\n",
+ ret);
+ return ret;
+ }
+
+ input_sync(input);
+ return 0;
+}
+
+static struct platform_driver fm07keys_driver = {
+ .probe = fm07keys_probe,
+ .driver = {
+ .name = DRV_NAME
+ },
+};
+
+static struct platform_device *dev;
+
+static const struct dmi_system_id fm07keys_dmi_table[] __initconst = {
+ {
+ /* FM07 and FM07P */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Winmate Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "IP30"),
+ },
+ },
+ { }
+};
+
+MODULE_DEVICE_TABLE(dmi, fm07keys_dmi_table);
+
+static int __init fm07keys_init(void)
+{
+ int ret;
+
+ if (!dmi_check_system(fm07keys_dmi_table))
+ return -ENODEV;
+
+ ret = platform_driver_register(&fm07keys_driver);
+ if (ret) {
+ pr_err("fm07keys: failed to register driver, err=%d\n", ret);
+ return ret;
+ }
+
+ dev = platform_device_register_simple(DRV_NAME, PLATFORM_DEVID_NONE, NULL, 0);
+ if (IS_ERR(dev)) {
+ ret = PTR_ERR(dev);
+ pr_err("fm07keys: failed to allocate device, err = %d\n", ret);
+ goto fail_register;
+ }
+
+ return 0;
+
+fail_register:
+ platform_driver_unregister(&fm07keys_driver);
+ return ret;
+}
+
+static void __exit fm07keys_exit(void)
+{
+ platform_driver_unregister(&fm07keys_driver);
+ platform_device_unregister(dev);
+}
+
+module_init(fm07keys_init);
+module_exit(fm07keys_exit);
+
+MODULE_AUTHOR("Daniel Beer <daniel.beer@tirotech.co.nz>");
+MODULE_DESCRIPTION("Winmate FM07 front-panel keys driver");
+MODULE_LICENSE("GPL");