diff options
Diffstat (limited to 'drivers/platform')
99 files changed, 4945 insertions, 1369 deletions
diff --git a/drivers/platform/Kconfig b/drivers/platform/Kconfig index 868b203617..81a298517d 100644 --- a/drivers/platform/Kconfig +++ b/drivers/platform/Kconfig @@ -14,3 +14,5 @@ source "drivers/platform/olpc/Kconfig" source "drivers/platform/surface/Kconfig" source "drivers/platform/x86/Kconfig" + +source "drivers/platform/arm64/Kconfig" diff --git a/drivers/platform/Makefile b/drivers/platform/Makefile index 4164017297..837202842a 100644 --- a/drivers/platform/Makefile +++ b/drivers/platform/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_OLPC_EC) += olpc/ obj-$(CONFIG_GOLDFISH) += goldfish/ obj-$(CONFIG_CHROME_PLATFORMS) += chrome/ obj-$(CONFIG_SURFACE_PLATFORMS) += surface/ +obj-$(CONFIG_ARM64_PLATFORM_DEVICES) += arm64/ diff --git a/drivers/platform/arm64/Kconfig b/drivers/platform/arm64/Kconfig new file mode 100644 index 0000000000..8fdca0f8e9 --- /dev/null +++ b/drivers/platform/arm64/Kconfig @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# EC-like Drivers for aarch64 based devices. +# + +menuconfig ARM64_PLATFORM_DEVICES + bool "ARM64 Platform-Specific Device Drivers" + depends on ARM64 || COMPILE_TEST + default y + help + Say Y here to get to see options for platform-specific device drivers + for arm64 based devices, primarily EC-like device drivers. + This option alone does not add any kernel code. + + If you say N, all options in this submenu will be skipped and disabled. + +if ARM64_PLATFORM_DEVICES + +config EC_ACER_ASPIRE1 + tristate "Acer Aspire 1 Embedded Controller driver" + depends on I2C + depends on DRM + depends on POWER_SUPPLY + depends on INPUT + help + Say Y here to enable the EC driver for the (Snapdragon-based) + Acer Aspire 1 laptop. The EC handles battery and charging + monitoring as well as some misc functions like the lid sensor + and USB Type-C DP HPD events. + + This driver provides battery and AC status support for the mentioned + laptop where this information is not properly exposed via the + standard ACPI devices. + +endif # ARM64_PLATFORM_DEVICES diff --git a/drivers/platform/arm64/Makefile b/drivers/platform/arm64/Makefile new file mode 100644 index 0000000000..4fcc985557 --- /dev/null +++ b/drivers/platform/arm64/Makefile @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Makefile for linux/drivers/platform/arm64 +# +# This dir should only include drivers for EC-like devices. +# + +obj-$(CONFIG_EC_ACER_ASPIRE1) += acer-aspire1-ec.o diff --git a/drivers/platform/arm64/acer-aspire1-ec.c b/drivers/platform/arm64/acer-aspire1-ec.c new file mode 100644 index 0000000000..dbb1cce139 --- /dev/null +++ b/drivers/platform/arm64/acer-aspire1-ec.c @@ -0,0 +1,562 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright (c) 2024, Nikita Travkin <nikita@trvn.ru> */ + +#include <asm-generic/unaligned.h> +#include <drm/drm_bridge.h> +#include <linux/bits.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/usb/typec_mux.h> +#include <linux/workqueue_types.h> + +#define MILLI_TO_MICRO 1000 + +#define ASPIRE_EC_EVENT 0x05 + +#define ASPIRE_EC_EVENT_WATCHDOG 0x20 +#define ASPIRE_EC_EVENT_KBD_BKL_ON 0x57 +#define ASPIRE_EC_EVENT_KBD_BKL_OFF 0x58 +#define ASPIRE_EC_EVENT_LID_CLOSE 0x9b +#define ASPIRE_EC_EVENT_LID_OPEN 0x9c +#define ASPIRE_EC_EVENT_BKL_UNBLANKED 0x9d +#define ASPIRE_EC_EVENT_BKL_BLANKED 0x9e +#define ASPIRE_EC_EVENT_FG_INF_CHG 0x85 +#define ASPIRE_EC_EVENT_FG_STA_CHG 0xc6 +#define ASPIRE_EC_EVENT_HPD_DIS 0xa3 +#define ASPIRE_EC_EVENT_HPD_CON 0xa4 + +#define ASPIRE_EC_FG_DYNAMIC 0x07 +#define ASPIRE_EC_FG_STATIC 0x08 + +#define ASPIRE_EC_FG_FLAG_PRESENT BIT(0) +#define ASPIRE_EC_FG_FLAG_FULL BIT(1) +#define ASPIRE_EC_FG_FLAG_DISCHARGING BIT(2) +#define ASPIRE_EC_FG_FLAG_CHARGING BIT(3) + +#define ASPIRE_EC_RAM_READ 0x20 +#define ASPIRE_EC_RAM_WRITE 0x21 + +#define ASPIRE_EC_RAM_WATCHDOG 0x19 +#define ASPIRE_EC_WATCHDOG_BIT BIT(6) + +#define ASPIRE_EC_RAM_KBD_MODE 0x43 + +#define ASPIRE_EC_RAM_KBD_FN_EN BIT(0) +#define ASPIRE_EC_RAM_KBD_MEDIA_ON_TOP BIT(5) +#define ASPIRE_EC_RAM_KBD_ALWAYS_SET BIT(6) +#define ASPIRE_EC_RAM_KBD_NUM_LAYER_EN BIT(7) + +#define ASPIRE_EC_RAM_KBD_MODE_2 0x60 + +#define ASPIRE_EC_RAM_KBD_MEDIA_NOTIFY BIT(3) + +#define ASPIRE_EC_RAM_HPD_STATUS 0xf4 +#define ASPIRE_EC_HPD_CONNECTED 0x03 + +#define ASPIRE_EC_RAM_LID_STATUS 0x4c +#define ASPIRE_EC_LID_OPEN BIT(6) + +#define ASPIRE_EC_RAM_ADP 0x40 +#define ASPIRE_EC_AC_STATUS BIT(0) + +struct aspire_ec { + struct i2c_client *client; + struct power_supply *bat_psy; + struct power_supply *adp_psy; + struct input_dev *idev; + + bool bridge_configured; + struct drm_bridge bridge; + struct work_struct work; +}; + +static int aspire_ec_ram_read(struct i2c_client *client, u8 off, u8 *data, u8 data_len) +{ + i2c_smbus_write_byte_data(client, ASPIRE_EC_RAM_READ, off); + i2c_smbus_read_i2c_block_data(client, ASPIRE_EC_RAM_READ, data_len, data); + return 0; +} + +static int aspire_ec_ram_write(struct i2c_client *client, u8 off, u8 data) +{ + u8 tmp[2] = {off, data}; + + i2c_smbus_write_i2c_block_data(client, ASPIRE_EC_RAM_WRITE, sizeof(tmp), tmp); + return 0; +} + +static irqreturn_t aspire_ec_irq_handler(int irq, void *data) +{ + struct aspire_ec *ec = data; + int id; + u8 tmp; + + /* + * The original ACPI firmware actually has a small sleep in the handler. + * + * It seems like in most cases it's not needed but when the device + * just exits suspend, our i2c driver has a brief time where data + * transfer is not possible yet. So this delay allows us to suppress + * quite a bunch of spurious error messages in dmesg. Thus it's kept. + */ + usleep_range(15000, 30000); + + id = i2c_smbus_read_byte_data(ec->client, ASPIRE_EC_EVENT); + if (id < 0) { + dev_err(&ec->client->dev, "Failed to read event id: %pe\n", ERR_PTR(id)); + return IRQ_HANDLED; + } + + switch (id) { + case 0x0: /* No event */ + break; + + case ASPIRE_EC_EVENT_WATCHDOG: + /* + * Here acpi responds to the event and clears some bit. + * Notify (\_SB.I2C3.BAT1, 0x81) // Information Change + * Notify (\_SB.I2C3.ADP1, 0x80) // Status Change + */ + aspire_ec_ram_read(ec->client, ASPIRE_EC_RAM_WATCHDOG, &tmp, sizeof(tmp)); + tmp &= ~ASPIRE_EC_WATCHDOG_BIT; + aspire_ec_ram_write(ec->client, ASPIRE_EC_RAM_WATCHDOG, tmp); + break; + + case ASPIRE_EC_EVENT_LID_CLOSE: + /* Notify (\_SB.LID0, 0x80) // Status Change */ + input_report_switch(ec->idev, SW_LID, 1); + input_sync(ec->idev); + break; + + case ASPIRE_EC_EVENT_LID_OPEN: + /* Notify (\_SB.LID0, 0x80) // Status Change */ + input_report_switch(ec->idev, SW_LID, 0); + input_sync(ec->idev); + break; + + case ASPIRE_EC_EVENT_FG_INF_CHG: + /* Notify (\_SB.I2C3.BAT1, 0x81) // Information Change */ + fallthrough; + case ASPIRE_EC_EVENT_FG_STA_CHG: + /* Notify (\_SB.I2C3.BAT1, 0x80) // Status Change */ + power_supply_changed(ec->bat_psy); + power_supply_changed(ec->adp_psy); + break; + + case ASPIRE_EC_EVENT_HPD_DIS: + if (ec->bridge_configured) + drm_bridge_hpd_notify(&ec->bridge, connector_status_disconnected); + break; + + case ASPIRE_EC_EVENT_HPD_CON: + if (ec->bridge_configured) + drm_bridge_hpd_notify(&ec->bridge, connector_status_connected); + break; + + case ASPIRE_EC_EVENT_BKL_BLANKED: + case ASPIRE_EC_EVENT_BKL_UNBLANKED: + /* Display backlight blanked on FN+F6. No action needed. */ + break; + + case ASPIRE_EC_EVENT_KBD_BKL_ON: + case ASPIRE_EC_EVENT_KBD_BKL_OFF: + /* + * There is a keyboard backlight connector on Aspire 1 that is + * controlled by FN+F8. There is no kb backlight on the device though. + * Seems like this is used on other devices like Acer Spin 7. + * No action needed. + */ + break; + + default: + dev_warn(&ec->client->dev, "Unknown event id=0x%x\n", id); + } + + return IRQ_HANDLED; +} + +/* + * Power supply. + */ + +struct aspire_ec_bat_psy_static_data { + u8 unk1; + u8 flags; + __le16 unk2; + __le16 voltage_design; + __le16 capacity_full; + __le16 unk3; + __le16 serial; + u8 model_id; + u8 vendor_id; +} __packed; + +static const char * const aspire_ec_bat_psy_battery_model[] = { + "AP18C4K", + "AP18C8K", + "AP19B8K", + "AP16M4J", + "AP16M5J", +}; + +static const char * const aspire_ec_bat_psy_battery_vendor[] = { + "SANYO", + "SONY", + "PANASONIC", + "SAMSUNG", + "SIMPLO", + "MOTOROLA", + "CELXPERT", + "LGC", + "GETAC", + "MURATA", +}; + +struct aspire_ec_bat_psy_dynamic_data { + u8 unk1; + u8 flags; + u8 unk2; + __le16 capacity_now; + __le16 voltage_now; + __le16 current_now; + __le16 unk3; + __le16 unk4; +} __packed; + +static int aspire_ec_bat_psy_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct aspire_ec *ec = power_supply_get_drvdata(psy); + struct aspire_ec_bat_psy_static_data sdat; + struct aspire_ec_bat_psy_dynamic_data ddat; + int str_index = 0; + + i2c_smbus_read_i2c_block_data(ec->client, ASPIRE_EC_FG_STATIC, sizeof(sdat), (u8 *)&sdat); + i2c_smbus_read_i2c_block_data(ec->client, ASPIRE_EC_FG_DYNAMIC, sizeof(ddat), (u8 *)&ddat); + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + val->intval = POWER_SUPPLY_STATUS_UNKNOWN; + if (ddat.flags & ASPIRE_EC_FG_FLAG_CHARGING) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else if (ddat.flags & ASPIRE_EC_FG_FLAG_DISCHARGING) + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + else if (ddat.flags & ASPIRE_EC_FG_FLAG_FULL) + val->intval = POWER_SUPPLY_STATUS_FULL; + break; + + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + val->intval = get_unaligned_le16(&ddat.voltage_now) * MILLI_TO_MICRO; + break; + + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + val->intval = le16_to_cpu(sdat.voltage_design) * MILLI_TO_MICRO; + break; + + case POWER_SUPPLY_PROP_CHARGE_NOW: + val->intval = get_unaligned_le16(&ddat.capacity_now) * MILLI_TO_MICRO; + break; + + case POWER_SUPPLY_PROP_CHARGE_FULL: + val->intval = le16_to_cpu(sdat.capacity_full) * MILLI_TO_MICRO; + break; + + case POWER_SUPPLY_PROP_CAPACITY: + val->intval = get_unaligned_le16(&ddat.capacity_now) * 100; + val->intval /= le16_to_cpu(sdat.capacity_full); + break; + + case POWER_SUPPLY_PROP_CURRENT_NOW: + val->intval = (s16)get_unaligned_le16(&ddat.current_now) * MILLI_TO_MICRO; + break; + + case POWER_SUPPLY_PROP_PRESENT: + val->intval = !!(ddat.flags & ASPIRE_EC_FG_FLAG_PRESENT); + break; + + case POWER_SUPPLY_PROP_SCOPE: + val->intval = POWER_SUPPLY_SCOPE_SYSTEM; + break; + + case POWER_SUPPLY_PROP_MODEL_NAME: + str_index = sdat.model_id - 1; + + if (str_index >= 0 && str_index < ARRAY_SIZE(aspire_ec_bat_psy_battery_model)) + val->strval = aspire_ec_bat_psy_battery_model[str_index]; + else + val->strval = "Unknown"; + break; + + case POWER_SUPPLY_PROP_MANUFACTURER: + str_index = sdat.vendor_id - 3; /* ACPI uses 3 as an offset here. */ + + if (str_index >= 0 && str_index < ARRAY_SIZE(aspire_ec_bat_psy_battery_vendor)) + val->strval = aspire_ec_bat_psy_battery_vendor[str_index]; + else + val->strval = "Unknown"; + break; + + default: + return -EINVAL; + } + + return 0; +} + +static enum power_supply_property aspire_ec_bat_psy_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_SCOPE, + POWER_SUPPLY_PROP_MODEL_NAME, + POWER_SUPPLY_PROP_MANUFACTURER, +}; + +static const struct power_supply_desc aspire_ec_bat_psy_desc = { + .name = "aspire-ec-bat", + .type = POWER_SUPPLY_TYPE_BATTERY, + .get_property = aspire_ec_bat_psy_get_property, + .properties = aspire_ec_bat_psy_props, + .num_properties = ARRAY_SIZE(aspire_ec_bat_psy_props), +}; + +static int aspire_ec_adp_psy_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct aspire_ec *ec = power_supply_get_drvdata(psy); + u8 tmp; + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + aspire_ec_ram_read(ec->client, ASPIRE_EC_RAM_ADP, &tmp, sizeof(tmp)); + val->intval = !!(tmp & ASPIRE_EC_AC_STATUS); + break; + + default: + return -EINVAL; + } + + return 0; +} + +static enum power_supply_property aspire_ec_adp_psy_props[] = { + POWER_SUPPLY_PROP_ONLINE, +}; + +static const struct power_supply_desc aspire_ec_adp_psy_desc = { + .name = "aspire-ec-adp", + .type = POWER_SUPPLY_TYPE_MAINS, + .get_property = aspire_ec_adp_psy_get_property, + .properties = aspire_ec_adp_psy_props, + .num_properties = ARRAY_SIZE(aspire_ec_adp_psy_props), +}; + +/* + * USB-C DP Alt mode HPD. + */ + +static int aspire_ec_bridge_attach(struct drm_bridge *bridge, enum drm_bridge_attach_flags flags) +{ + return flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR ? 0 : -EINVAL; +} + +static void aspire_ec_bridge_update_hpd_work(struct work_struct *work) +{ + struct aspire_ec *ec = container_of(work, struct aspire_ec, work); + u8 tmp; + + aspire_ec_ram_read(ec->client, ASPIRE_EC_RAM_HPD_STATUS, &tmp, sizeof(tmp)); + if (tmp == ASPIRE_EC_HPD_CONNECTED) + drm_bridge_hpd_notify(&ec->bridge, connector_status_connected); + else + drm_bridge_hpd_notify(&ec->bridge, connector_status_disconnected); +} + +static void aspire_ec_bridge_hpd_enable(struct drm_bridge *bridge) +{ + struct aspire_ec *ec = container_of(bridge, struct aspire_ec, bridge); + + schedule_work(&ec->work); +} + +static const struct drm_bridge_funcs aspire_ec_bridge_funcs = { + .hpd_enable = aspire_ec_bridge_hpd_enable, + .attach = aspire_ec_bridge_attach, +}; + +/* + * Sysfs attributes. + */ + +static ssize_t fn_lock_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct aspire_ec *ec = i2c_get_clientdata(to_i2c_client(dev)); + u8 tmp; + + aspire_ec_ram_read(ec->client, ASPIRE_EC_RAM_KBD_MODE, &tmp, sizeof(tmp)); + + return sysfs_emit(buf, "%u\n", !(tmp & ASPIRE_EC_RAM_KBD_MEDIA_ON_TOP)); +} + +static ssize_t fn_lock_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct aspire_ec *ec = i2c_get_clientdata(to_i2c_client(dev)); + u8 tmp; + + bool state; + int ret; + + ret = kstrtobool(buf, &state); + if (ret) + return ret; + + aspire_ec_ram_read(ec->client, ASPIRE_EC_RAM_KBD_MODE, &tmp, sizeof(tmp)); + + if (state) + tmp &= ~ASPIRE_EC_RAM_KBD_MEDIA_ON_TOP; + else + tmp |= ASPIRE_EC_RAM_KBD_MEDIA_ON_TOP; + + aspire_ec_ram_write(ec->client, ASPIRE_EC_RAM_KBD_MODE, tmp); + + return count; +} + +static DEVICE_ATTR_RW(fn_lock); + +static struct attribute *aspire_ec_attrs[] = { + &dev_attr_fn_lock.attr, + NULL +}; +ATTRIBUTE_GROUPS(aspire_ec); + +static int aspire_ec_probe(struct i2c_client *client) +{ + struct power_supply_config psy_cfg = {0}; + struct device *dev = &client->dev; + struct fwnode_handle *fwnode; + struct aspire_ec *ec; + int ret; + u8 tmp; + + ec = devm_kzalloc(dev, sizeof(*ec), GFP_KERNEL); + if (!ec) + return -ENOMEM; + + ec->client = client; + i2c_set_clientdata(client, ec); + + /* Battery status reports */ + psy_cfg.drv_data = ec; + ec->bat_psy = devm_power_supply_register(dev, &aspire_ec_bat_psy_desc, &psy_cfg); + if (IS_ERR(ec->bat_psy)) + return dev_err_probe(dev, PTR_ERR(ec->bat_psy), + "Failed to register battery power supply\n"); + + ec->adp_psy = devm_power_supply_register(dev, &aspire_ec_adp_psy_desc, &psy_cfg); + if (IS_ERR(ec->adp_psy)) + return dev_err_probe(dev, PTR_ERR(ec->adp_psy), + "Failed to register AC power supply\n"); + + /* Lid switch */ + ec->idev = devm_input_allocate_device(dev); + if (!ec->idev) + return -ENOMEM; + + ec->idev->name = "aspire-ec"; + ec->idev->phys = "aspire-ec/input0"; + input_set_capability(ec->idev, EV_SW, SW_LID); + + ret = input_register_device(ec->idev); + if (ret) + return dev_err_probe(dev, ret, "Input device register failed\n"); + + /* Enable the keyboard fn keys */ + tmp = ASPIRE_EC_RAM_KBD_FN_EN | ASPIRE_EC_RAM_KBD_ALWAYS_SET; + tmp |= ASPIRE_EC_RAM_KBD_MEDIA_ON_TOP; + aspire_ec_ram_write(client, ASPIRE_EC_RAM_KBD_MODE, tmp); + + aspire_ec_ram_read(client, ASPIRE_EC_RAM_KBD_MODE_2, &tmp, sizeof(tmp)); + tmp |= ASPIRE_EC_RAM_KBD_MEDIA_NOTIFY; + aspire_ec_ram_write(client, ASPIRE_EC_RAM_KBD_MODE_2, tmp); + + /* External Type-C display attach reports */ + fwnode = device_get_named_child_node(dev, "connector"); + if (fwnode) { + INIT_WORK(&ec->work, aspire_ec_bridge_update_hpd_work); + ec->bridge.funcs = &aspire_ec_bridge_funcs; + ec->bridge.of_node = to_of_node(fwnode); + ec->bridge.ops = DRM_BRIDGE_OP_HPD; + ec->bridge.type = DRM_MODE_CONNECTOR_USB; + + ret = devm_drm_bridge_add(dev, &ec->bridge); + if (ret) { + fwnode_handle_put(fwnode); + return dev_err_probe(dev, ret, "Failed to register drm bridge\n"); + } + + ec->bridge_configured = true; + } + + ret = devm_request_threaded_irq(dev, client->irq, NULL, + aspire_ec_irq_handler, IRQF_ONESHOT, + dev_name(dev), ec); + if (ret) + return dev_err_probe(dev, ret, "Failed to request irq\n"); + + return 0; +} + +static int aspire_ec_resume(struct device *dev) +{ + struct aspire_ec *ec = i2c_get_clientdata(to_i2c_client(dev)); + u8 tmp; + + aspire_ec_ram_read(ec->client, ASPIRE_EC_RAM_LID_STATUS, &tmp, sizeof(tmp)); + input_report_switch(ec->idev, SW_LID, !!(tmp & ASPIRE_EC_LID_OPEN)); + input_sync(ec->idev); + + return 0; +} + +static const struct i2c_device_id aspire_ec_id[] = { + { "aspire1-ec", }, + { } +}; +MODULE_DEVICE_TABLE(i2c, aspire_ec_id); + +static const struct of_device_id aspire_ec_of_match[] = { + { .compatible = "acer,aspire1-ec", }, + { } +}; +MODULE_DEVICE_TABLE(of, aspire_ec_of_match); + +static DEFINE_SIMPLE_DEV_PM_OPS(aspire_ec_pm_ops, NULL, aspire_ec_resume); + +static struct i2c_driver aspire_ec_driver = { + .driver = { + .name = "aspire-ec", + .of_match_table = aspire_ec_of_match, + .pm = pm_sleep_ptr(&aspire_ec_pm_ops), + .dev_groups = aspire_ec_groups, + }, + .probe = aspire_ec_probe, + .id_table = aspire_ec_id, +}; +module_i2c_driver(aspire_ec_driver); + +MODULE_DESCRIPTION("Acer Aspire 1 embedded controller"); +MODULE_AUTHOR("Nikita Travkin <nikita@trvn.ru>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig index 7a83346bfa..073616b5b5 100644 --- a/drivers/platform/chrome/Kconfig +++ b/drivers/platform/chrome/Kconfig @@ -132,6 +132,7 @@ config CROS_EC_UART config CROS_EC_LPC tristate "ChromeOS Embedded Controller (LPC)" depends on CROS_EC && ACPI && (X86 || COMPILE_TEST) + depends on HAS_IOPORT help If you say Y here, you get support for talking to the ChromeOS EC over an LPC bus, including the LPC Microchip EC (MEC) variant. diff --git a/drivers/platform/chrome/cros_ec_chardev.c b/drivers/platform/chrome/cros_ec_chardev.c index 81950bb2c6..7f034ead7a 100644 --- a/drivers/platform/chrome/cros_ec_chardev.c +++ b/drivers/platform/chrome/cros_ec_chardev.c @@ -14,6 +14,7 @@ #include <linux/device.h> #include <linux/fs.h> #include <linux/miscdevice.h> +#include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/notifier.h> #include <linux/platform_data/cros_ec_chardev.h> @@ -403,17 +404,23 @@ static void cros_ec_chardev_remove(struct platform_device *pdev) misc_deregister(&data->misc); } +static const struct platform_device_id cros_ec_chardev_id[] = { + { DRV_NAME, 0 }, + {} +}; +MODULE_DEVICE_TABLE(platform, cros_ec_chardev_id); + static struct platform_driver cros_ec_chardev_driver = { .driver = { .name = DRV_NAME, }, .probe = cros_ec_chardev_probe, .remove_new = cros_ec_chardev_remove, + .id_table = cros_ec_chardev_id, }; module_platform_driver(cros_ec_chardev_driver); -MODULE_ALIAS("platform:" DRV_NAME); MODULE_AUTHOR("Enric Balletbo i Serra <enric.balletbo@collabora.com>"); MODULE_DESCRIPTION("ChromeOS EC Miscellaneous Character Driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/platform/chrome/cros_ec_debugfs.c b/drivers/platform/chrome/cros_ec_debugfs.c index 6bf6f0e7b5..5996e9d53c 100644 --- a/drivers/platform/chrome/cros_ec_debugfs.c +++ b/drivers/platform/chrome/cros_ec_debugfs.c @@ -7,6 +7,7 @@ #include <linux/debugfs.h> #include <linux/delay.h> #include <linux/fs.h> +#include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/mutex.h> #include <linux/platform_data/cros_ec_commands.h> @@ -329,6 +330,7 @@ static int ec_read_version_supported(struct cros_ec_dev *ec) if (!msg) return 0; + msg->version = 1; msg->command = EC_CMD_GET_CMD_VERSIONS + ec->cmd_offset; msg->outsize = sizeof(*params); msg->insize = sizeof(*response); @@ -564,6 +566,12 @@ static int __maybe_unused cros_ec_debugfs_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(cros_ec_debugfs_pm_ops, cros_ec_debugfs_suspend, cros_ec_debugfs_resume); +static const struct platform_device_id cros_ec_debugfs_id[] = { + { DRV_NAME, 0 }, + {} +}; +MODULE_DEVICE_TABLE(platform, cros_ec_debugfs_id); + static struct platform_driver cros_ec_debugfs_driver = { .driver = { .name = DRV_NAME, @@ -572,10 +580,10 @@ static struct platform_driver cros_ec_debugfs_driver = { }, .probe = cros_ec_debugfs_probe, .remove_new = cros_ec_debugfs_remove, + .id_table = cros_ec_debugfs_id, }; module_platform_driver(cros_ec_debugfs_driver); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Debug logs for ChromeOS EC"); -MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/platform/chrome/cros_ec_lightbar.c b/drivers/platform/chrome/cros_ec_lightbar.c index 6677cc6c49..1e69f61115 100644 --- a/drivers/platform/chrome/cros_ec_lightbar.c +++ b/drivers/platform/chrome/cros_ec_lightbar.c @@ -9,6 +9,7 @@ #include <linux/fs.h> #include <linux/kobject.h> #include <linux/kstrtox.h> +#include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/platform_data/cros_ec_commands.h> #include <linux/platform_data/cros_ec_proto.h> @@ -594,6 +595,12 @@ static int __maybe_unused cros_ec_lightbar_suspend(struct device *dev) static SIMPLE_DEV_PM_OPS(cros_ec_lightbar_pm_ops, cros_ec_lightbar_suspend, cros_ec_lightbar_resume); +static const struct platform_device_id cros_ec_lightbar_id[] = { + { DRV_NAME, 0 }, + {} +}; +MODULE_DEVICE_TABLE(platform, cros_ec_lightbar_id); + static struct platform_driver cros_ec_lightbar_driver = { .driver = { .name = DRV_NAME, @@ -602,10 +609,10 @@ static struct platform_driver cros_ec_lightbar_driver = { }, .probe = cros_ec_lightbar_probe, .remove_new = cros_ec_lightbar_remove, + .id_table = cros_ec_lightbar_id, }; module_platform_driver(cros_ec_lightbar_driver); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Expose the Chromebook Pixel's lightbar to userspace"); -MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/platform/chrome/cros_ec_lpc.c b/drivers/platform/chrome/cros_ec_lpc.c index f0f3d3d561..ddfbfec44f 100644 --- a/drivers/platform/chrome/cros_ec_lpc.c +++ b/drivers/platform/chrome/cros_ec_lpc.c @@ -34,6 +34,32 @@ /* True if ACPI device is present */ static bool cros_ec_lpc_acpi_device_found; +/* + * Indicates that lpc_driver_data.quirk_mmio_memory_base should + * be used as the base port for EC mapped memory. + */ +#define CROS_EC_LPC_QUIRK_REMAP_MEMORY BIT(0) + +/** + * struct lpc_driver_data - driver data attached to a DMI device ID to indicate + * hardware quirks. + * @quirks: a bitfield composed of quirks from CROS_EC_LPC_QUIRK_* + * @quirk_mmio_memory_base: The first I/O port addressing EC mapped memory (used + * when quirk ...REMAP_MEMORY is set.) + */ +struct lpc_driver_data { + u32 quirks; + u16 quirk_mmio_memory_base; +}; + +/** + * struct cros_ec_lpc - LPC device-specific data + * @mmio_memory_base: The first I/O port addressing EC mapped memory. + */ +struct cros_ec_lpc { + u16 mmio_memory_base; +}; + /** * struct lpc_driver_ops - LPC driver operations * @read: Copy length bytes from EC address offset into buffer dest. Returns @@ -290,6 +316,7 @@ done: static int cros_ec_lpc_readmem(struct cros_ec_device *ec, unsigned int offset, unsigned int bytes, void *dest) { + struct cros_ec_lpc *ec_lpc = ec->priv; int i = offset; char *s = dest; int cnt = 0; @@ -299,13 +326,13 @@ static int cros_ec_lpc_readmem(struct cros_ec_device *ec, unsigned int offset, /* fixed length */ if (bytes) { - cros_ec_lpc_ops.read(EC_LPC_ADDR_MEMMAP + offset, bytes, s); + cros_ec_lpc_ops.read(ec_lpc->mmio_memory_base + offset, bytes, s); return bytes; } /* string */ for (; i < EC_MEMMAP_SIZE; i++, s++) { - cros_ec_lpc_ops.read(EC_LPC_ADDR_MEMMAP + i, 1, s); + cros_ec_lpc_ops.read(ec_lpc->mmio_memory_base + i, 1, s); cnt++; if (!*s) break; @@ -353,8 +380,28 @@ static int cros_ec_lpc_probe(struct platform_device *pdev) struct acpi_device *adev; acpi_status status; struct cros_ec_device *ec_dev; + struct cros_ec_lpc *ec_lpc; + struct lpc_driver_data *driver_data; u8 buf[2] = {}; int irq, ret; + u32 quirks; + + ec_lpc = devm_kzalloc(dev, sizeof(*ec_lpc), GFP_KERNEL); + if (!ec_lpc) + return -ENOMEM; + + ec_lpc->mmio_memory_base = EC_LPC_ADDR_MEMMAP; + + driver_data = platform_get_drvdata(pdev); + if (driver_data) { + quirks = driver_data->quirks; + + if (quirks) + dev_info(dev, "loaded with quirks %8.08x\n", quirks); + + if (quirks & CROS_EC_LPC_QUIRK_REMAP_MEMORY) + ec_lpc->mmio_memory_base = driver_data->quirk_mmio_memory_base; + } /* * The Framework Laptop (and possibly other non-ChromeOS devices) @@ -380,7 +427,7 @@ static int cros_ec_lpc_probe(struct platform_device *pdev) cros_ec_lpc_ops.write = cros_ec_lpc_mec_write_bytes; cros_ec_lpc_ops.read(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID, 2, buf); if (buf[0] != 'E' || buf[1] != 'C') { - if (!devm_request_region(dev, EC_LPC_ADDR_MEMMAP, EC_MEMMAP_SIZE, + if (!devm_request_region(dev, ec_lpc->mmio_memory_base, EC_MEMMAP_SIZE, dev_name(dev))) { dev_err(dev, "couldn't reserve memmap region\n"); return -EBUSY; @@ -389,7 +436,7 @@ static int cros_ec_lpc_probe(struct platform_device *pdev) /* Re-assign read/write operations for the non MEC variant */ cros_ec_lpc_ops.read = cros_ec_lpc_read_bytes; cros_ec_lpc_ops.write = cros_ec_lpc_write_bytes; - cros_ec_lpc_ops.read(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID, 2, + cros_ec_lpc_ops.read(ec_lpc->mmio_memory_base + EC_MEMMAP_ID, 2, buf); if (buf[0] != 'E' || buf[1] != 'C') { dev_err(dev, "EC ID not detected\n"); @@ -423,6 +470,7 @@ static int cros_ec_lpc_probe(struct platform_device *pdev) ec_dev->din_size = sizeof(struct ec_host_response) + sizeof(struct ec_response_get_protocol_info); ec_dev->dout_size = sizeof(struct ec_host_request); + ec_dev->priv = ec_lpc; /* * Some boards do not have an IRQ allotted for cros_ec_lpc, @@ -479,6 +527,11 @@ static const struct acpi_device_id cros_ec_lpc_acpi_device_ids[] = { }; MODULE_DEVICE_TABLE(acpi, cros_ec_lpc_acpi_device_ids); +static const struct lpc_driver_data framework_laptop_amd_lpc_driver_data __initconst = { + .quirks = CROS_EC_LPC_QUIRK_REMAP_MEMORY, + .quirk_mmio_memory_base = 0xE00, +}; + static const struct dmi_system_id cros_ec_lpc_dmi_table[] __initconst = { { /* @@ -533,7 +586,16 @@ static const struct dmi_system_id cros_ec_lpc_dmi_table[] __initconst = { }, /* A small number of non-Chromebook/box machines also use the ChromeOS EC */ { - /* the Framework Laptop */ + /* the Framework Laptop 13 (AMD Ryzen) and 16 (AMD Ryzen) */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Framework"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMD Ryzen"), + DMI_MATCH(DMI_PRODUCT_FAMILY, "Laptop"), + }, + .driver_data = (void *)&framework_laptop_amd_lpc_driver_data, + }, + { + /* the Framework Laptop (Intel 11th, 12th, 13th Generation) */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Framework"), DMI_MATCH(DMI_PRODUCT_NAME, "Laptop"), @@ -610,14 +672,16 @@ static int __init cros_ec_lpc_init(void) { int ret; acpi_status status; + const struct dmi_system_id *dmi_match; status = acpi_get_devices(ACPI_DRV_NAME, cros_ec_lpc_parse_device, &cros_ec_lpc_acpi_device_found, NULL); if (ACPI_FAILURE(status)) pr_warn(DRV_NAME ": Looking for %s failed\n", ACPI_DRV_NAME); - if (!cros_ec_lpc_acpi_device_found && - !dmi_check_system(cros_ec_lpc_dmi_table)) { + dmi_match = dmi_first_match(cros_ec_lpc_dmi_table); + + if (!cros_ec_lpc_acpi_device_found && !dmi_match) { pr_err(DRV_NAME ": unsupported system.\n"); return -ENODEV; } @@ -630,6 +694,9 @@ static int __init cros_ec_lpc_init(void) } if (!cros_ec_lpc_acpi_device_found) { + /* Pass the DMI match's driver data down to the platform device */ + platform_set_drvdata(&cros_ec_lpc_device, dmi_match->driver_data); + /* Register the device, and it'll get hooked up automatically */ ret = platform_device_register(&cros_ec_lpc_device); if (ret) { diff --git a/drivers/platform/chrome/cros_ec_proto_test.c b/drivers/platform/chrome/cros_ec_proto_test.c index b6169d6f24..41378c2ee6 100644 --- a/drivers/platform/chrome/cros_ec_proto_test.c +++ b/drivers/platform/chrome/cros_ec_proto_test.c @@ -1543,21 +1543,18 @@ static void cros_ec_proto_test_cmd_xfer_normal(struct kunit *test) struct cros_ec_device *ec_dev = &priv->ec_dev; struct ec_xfer_mock *mock; int ret; - struct { - struct cros_ec_command msg; - u8 data[0x100]; - } __packed buf; + DEFINE_RAW_FLEX(struct cros_ec_command, buf, data, 0x100); ec_dev->max_request = 0xff; ec_dev->max_response = 0xee; ec_dev->max_passthru = 0xdd; - buf.msg.version = 0; - buf.msg.command = EC_CMD_HELLO; - buf.msg.insize = 4; - buf.msg.outsize = 2; - buf.data[0] = 0x55; - buf.data[1] = 0xaa; + buf->version = 0; + buf->command = EC_CMD_HELLO; + buf->insize = 4; + buf->outsize = 2; + buf->data[0] = 0x55; + buf->data[1] = 0xaa; { u8 *data; @@ -1572,7 +1569,7 @@ static void cros_ec_proto_test_cmd_xfer_normal(struct kunit *test) data[3] = 0x33; } - ret = cros_ec_cmd_xfer(ec_dev, &buf.msg); + ret = cros_ec_cmd_xfer(ec_dev, buf); KUNIT_EXPECT_EQ(test, ret, 4); { @@ -1590,10 +1587,10 @@ static void cros_ec_proto_test_cmd_xfer_normal(struct kunit *test) KUNIT_EXPECT_EQ(test, data[0], 0x55); KUNIT_EXPECT_EQ(test, data[1], 0xaa); - KUNIT_EXPECT_EQ(test, buf.data[0], 0xaa); - KUNIT_EXPECT_EQ(test, buf.data[1], 0x55); - KUNIT_EXPECT_EQ(test, buf.data[2], 0xcc); - KUNIT_EXPECT_EQ(test, buf.data[3], 0x33); + KUNIT_EXPECT_EQ(test, buf->data[0], 0xaa); + KUNIT_EXPECT_EQ(test, buf->data[1], 0x55); + KUNIT_EXPECT_EQ(test, buf->data[2], 0xcc); + KUNIT_EXPECT_EQ(test, buf->data[3], 0x33); } } @@ -1603,26 +1600,23 @@ static void cros_ec_proto_test_cmd_xfer_excess_msg_insize(struct kunit *test) struct cros_ec_device *ec_dev = &priv->ec_dev; struct ec_xfer_mock *mock; int ret; - struct { - struct cros_ec_command msg; - u8 data[0x100]; - } __packed buf; + DEFINE_RAW_FLEX(struct cros_ec_command, buf, data, 0x100); ec_dev->max_request = 0xff; ec_dev->max_response = 0xee; ec_dev->max_passthru = 0xdd; - buf.msg.version = 0; - buf.msg.command = EC_CMD_HELLO; - buf.msg.insize = 0xee + 1; - buf.msg.outsize = 2; + buf->version = 0; + buf->command = EC_CMD_HELLO; + buf->insize = 0xee + 1; + buf->outsize = 2; { mock = cros_kunit_ec_xfer_mock_add(test, 0xcc); KUNIT_ASSERT_PTR_NE(test, mock, NULL); } - ret = cros_ec_cmd_xfer(ec_dev, &buf.msg); + ret = cros_ec_cmd_xfer(ec_dev, buf); KUNIT_EXPECT_EQ(test, ret, 0xcc); { @@ -1641,21 +1635,18 @@ static void cros_ec_proto_test_cmd_xfer_excess_msg_outsize_without_passthru(stru struct cros_ec_proto_test_priv *priv = test->priv; struct cros_ec_device *ec_dev = &priv->ec_dev; int ret; - struct { - struct cros_ec_command msg; - u8 data[0x100]; - } __packed buf; + DEFINE_RAW_FLEX(struct cros_ec_command, buf, data, 0x100); ec_dev->max_request = 0xff; ec_dev->max_response = 0xee; ec_dev->max_passthru = 0xdd; - buf.msg.version = 0; - buf.msg.command = EC_CMD_HELLO; - buf.msg.insize = 4; - buf.msg.outsize = 0xff + 1; + buf->version = 0; + buf->command = EC_CMD_HELLO; + buf->insize = 4; + buf->outsize = 0xff + 1; - ret = cros_ec_cmd_xfer(ec_dev, &buf.msg); + ret = cros_ec_cmd_xfer(ec_dev, buf); KUNIT_EXPECT_EQ(test, ret, -EMSGSIZE); } @@ -1664,21 +1655,18 @@ static void cros_ec_proto_test_cmd_xfer_excess_msg_outsize_with_passthru(struct struct cros_ec_proto_test_priv *priv = test->priv; struct cros_ec_device *ec_dev = &priv->ec_dev; int ret; - struct { - struct cros_ec_command msg; - u8 data[0x100]; - } __packed buf; + DEFINE_RAW_FLEX(struct cros_ec_command, buf, data, 0x100); ec_dev->max_request = 0xff; ec_dev->max_response = 0xee; ec_dev->max_passthru = 0xdd; - buf.msg.version = 0; - buf.msg.command = EC_CMD_PASSTHRU_OFFSET(CROS_EC_DEV_PD_INDEX) + EC_CMD_HELLO; - buf.msg.insize = 4; - buf.msg.outsize = 0xdd + 1; + buf->version = 0; + buf->command = EC_CMD_PASSTHRU_OFFSET(CROS_EC_DEV_PD_INDEX) + EC_CMD_HELLO; + buf->insize = 4; + buf->outsize = 0xdd + 1; - ret = cros_ec_cmd_xfer(ec_dev, &buf.msg); + ret = cros_ec_cmd_xfer(ec_dev, buf); KUNIT_EXPECT_EQ(test, ret, -EMSGSIZE); } diff --git a/drivers/platform/chrome/cros_ec_sensorhub.c b/drivers/platform/chrome/cros_ec_sensorhub.c index 31fb8bdaad..50cdae67fa 100644 --- a/drivers/platform/chrome/cros_ec_sensorhub.c +++ b/drivers/platform/chrome/cros_ec_sensorhub.c @@ -8,6 +8,7 @@ #include <linux/init.h> #include <linux/device.h> +#include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/platform_data/cros_ec_commands.h> #include <linux/platform_data/cros_ec_proto.h> @@ -247,17 +248,23 @@ static SIMPLE_DEV_PM_OPS(cros_ec_sensorhub_pm_ops, cros_ec_sensorhub_suspend, cros_ec_sensorhub_resume); +static const struct platform_device_id cros_ec_sensorhub_id[] = { + { DRV_NAME, 0 }, + {} +}; +MODULE_DEVICE_TABLE(platform, cros_ec_sensorhub_id); + static struct platform_driver cros_ec_sensorhub_driver = { .driver = { .name = DRV_NAME, .pm = &cros_ec_sensorhub_pm_ops, }, .probe = cros_ec_sensorhub_probe, + .id_table = cros_ec_sensorhub_id, }; module_platform_driver(cros_ec_sensorhub_driver); -MODULE_ALIAS("platform:" DRV_NAME); MODULE_AUTHOR("Gwendal Grignou <gwendal@chromium.org>"); MODULE_DESCRIPTION("ChromeOS EC MEMS Sensor Hub Driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/platform/chrome/cros_ec_sysfs.c b/drivers/platform/chrome/cros_ec_sysfs.c index 93e67ab4af..9c944146ee 100644 --- a/drivers/platform/chrome/cros_ec_sysfs.c +++ b/drivers/platform/chrome/cros_ec_sysfs.c @@ -8,6 +8,7 @@ #include <linux/device.h> #include <linux/fs.h> #include <linux/kobject.h> +#include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/platform_data/cros_ec_commands.h> #include <linux/platform_data/cros_ec_proto.h> @@ -347,16 +348,22 @@ static void cros_ec_sysfs_remove(struct platform_device *pd) sysfs_remove_group(&ec_dev->class_dev.kobj, &cros_ec_attr_group); } +static const struct platform_device_id cros_ec_sysfs_id[] = { + { DRV_NAME, 0 }, + {} +}; +MODULE_DEVICE_TABLE(platform, cros_ec_sysfs_id); + static struct platform_driver cros_ec_sysfs_driver = { .driver = { .name = DRV_NAME, }, .probe = cros_ec_sysfs_probe, .remove_new = cros_ec_sysfs_remove, + .id_table = cros_ec_sysfs_id, }; module_platform_driver(cros_ec_sysfs_driver); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Expose the ChromeOS EC through sysfs"); -MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/platform/chrome/cros_ec_vbc.c b/drivers/platform/chrome/cros_ec_vbc.c index 274ea0c64b..787a19db49 100644 --- a/drivers/platform/chrome/cros_ec_vbc.c +++ b/drivers/platform/chrome/cros_ec_vbc.c @@ -6,6 +6,7 @@ #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/platform_data/cros_ec_commands.h> #include <linux/platform_data/cros_ec_proto.h> @@ -133,16 +134,22 @@ static void cros_ec_vbc_remove(struct platform_device *pd) &cros_ec_vbc_attr_group); } +static const struct platform_device_id cros_ec_vbc_id[] = { + { DRV_NAME, 0 }, + {} +}; +MODULE_DEVICE_TABLE(platform, cros_ec_vbc_id); + static struct platform_driver cros_ec_vbc_driver = { .driver = { .name = DRV_NAME, }, .probe = cros_ec_vbc_probe, .remove_new = cros_ec_vbc_remove, + .id_table = cros_ec_vbc_id, }; module_platform_driver(cros_ec_vbc_driver); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Expose the vboot context nvram to userspace"); -MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/platform/chrome/cros_hps_i2c.c b/drivers/platform/chrome/cros_hps_i2c.c index b313130803..dd14957ec3 100644 --- a/drivers/platform/chrome/cros_hps_i2c.c +++ b/drivers/platform/chrome/cros_hps_i2c.c @@ -126,7 +126,7 @@ static int hps_resume(struct device *dev) hps_set_power(hps, true); return 0; } -static UNIVERSAL_DEV_PM_OPS(hps_pm_ops, hps_suspend, hps_resume, NULL); +static DEFINE_RUNTIME_DEV_PM_OPS(hps_pm_ops, hps_suspend, hps_resume, NULL); static const struct i2c_device_id hps_i2c_id[] = { { "cros-hps", 0 }, @@ -148,7 +148,7 @@ static struct i2c_driver hps_i2c_driver = { .id_table = hps_i2c_id, .driver = { .name = "cros-hps", - .pm = &hps_pm_ops, + .pm = pm_ptr(&hps_pm_ops), .acpi_match_table = ACPI_PTR(hps_acpi_id), }, }; diff --git a/drivers/platform/chrome/cros_kbd_led_backlight.c b/drivers/platform/chrome/cros_kbd_led_backlight.c index 793fd3f101..b83e4f3286 100644 --- a/drivers/platform/chrome/cros_kbd_led_backlight.c +++ b/drivers/platform/chrome/cros_kbd_led_backlight.c @@ -9,6 +9,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/leds.h> +#include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/of.h> #include <linux/platform_data/cros_ec_commands.h> @@ -247,17 +248,23 @@ static const struct of_device_id keyboard_led_of_match[] = { MODULE_DEVICE_TABLE(of, keyboard_led_of_match); #endif +static const struct platform_device_id keyboard_led_id[] = { + { "cros-keyboard-leds", 0 }, + {} +}; +MODULE_DEVICE_TABLE(platform, keyboard_led_id); + static struct platform_driver keyboard_led_driver = { .driver = { - .name = "chromeos-keyboard-leds", + .name = "cros-keyboard-leds", .acpi_match_table = ACPI_PTR(keyboard_led_acpi_match), .of_match_table = of_match_ptr(keyboard_led_of_match), }, .probe = keyboard_led_probe, + .id_table = keyboard_led_id, }; module_platform_driver(keyboard_led_driver); MODULE_AUTHOR("Simon Que <sque@chromium.org>"); MODULE_DESCRIPTION("ChromeOS Keyboard backlight LED Driver"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:chromeos-keyboard-leds"); diff --git a/drivers/platform/chrome/wilco_ec/Kconfig b/drivers/platform/chrome/wilco_ec/Kconfig index 49e8530ca0..d1648fb099 100644 --- a/drivers/platform/chrome/wilco_ec/Kconfig +++ b/drivers/platform/chrome/wilco_ec/Kconfig @@ -3,6 +3,7 @@ config WILCO_EC tristate "ChromeOS Wilco Embedded Controller" depends on X86 || COMPILE_TEST depends on ACPI && CROS_EC_LPC && LEDS_CLASS + depends on HAS_IOPORT help If you say Y here, you get support for talking to the ChromeOS Wilco EC over an eSPI bus. This uses a simple byte-level protocol diff --git a/drivers/platform/chrome/wilco_ec/core.c b/drivers/platform/chrome/wilco_ec/core.c index 9b59a1bed2..3e6b6cd81a 100644 --- a/drivers/platform/chrome/wilco_ec/core.c +++ b/drivers/platform/chrome/wilco_ec/core.c @@ -10,6 +10,7 @@ #include <linux/acpi.h> #include <linux/device.h> #include <linux/ioport.h> +#include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/platform_data/wilco-ec.h> #include <linux/platform_device.h> @@ -150,6 +151,12 @@ static const struct acpi_device_id wilco_ec_acpi_device_ids[] = { }; MODULE_DEVICE_TABLE(acpi, wilco_ec_acpi_device_ids); +static const struct platform_device_id wilco_ec_id[] = { + { DRV_NAME, 0 }, + {} +}; +MODULE_DEVICE_TABLE(platform, wilco_ec_id); + static struct platform_driver wilco_ec_driver = { .driver = { .name = DRV_NAME, @@ -157,6 +164,7 @@ static struct platform_driver wilco_ec_driver = { }, .probe = wilco_ec_probe, .remove_new = wilco_ec_remove, + .id_table = wilco_ec_id, }; module_platform_driver(wilco_ec_driver); @@ -165,4 +173,3 @@ MODULE_AUTHOR("Nick Crews <ncrews@chromium.org>"); MODULE_AUTHOR("Duncan Laurie <dlaurie@chromium.org>"); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("ChromeOS Wilco Embedded Controller driver"); -MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/platform/chrome/wilco_ec/debugfs.c b/drivers/platform/chrome/wilco_ec/debugfs.c index 93c11f81ca..983f2fa44b 100644 --- a/drivers/platform/chrome/wilco_ec/debugfs.c +++ b/drivers/platform/chrome/wilco_ec/debugfs.c @@ -10,6 +10,7 @@ #include <linux/ctype.h> #include <linux/debugfs.h> #include <linux/fs.h> +#include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/platform_data/wilco-ec.h> #include <linux/platform_device.h> @@ -265,17 +266,23 @@ static void wilco_ec_debugfs_remove(struct platform_device *pdev) debugfs_remove_recursive(debug_info->dir); } +static const struct platform_device_id wilco_ec_debugfs_id[] = { + { DRV_NAME, 0 }, + {} +}; +MODULE_DEVICE_TABLE(platform, wilco_ec_debugfs_id); + static struct platform_driver wilco_ec_debugfs_driver = { .driver = { .name = DRV_NAME, }, .probe = wilco_ec_debugfs_probe, .remove_new = wilco_ec_debugfs_remove, + .id_table = wilco_ec_debugfs_id, }; module_platform_driver(wilco_ec_debugfs_driver); -MODULE_ALIAS("platform:" DRV_NAME); MODULE_AUTHOR("Nick Crews <ncrews@chromium.org>"); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("Wilco EC debugfs driver"); diff --git a/drivers/platform/chrome/wilco_ec/event.c b/drivers/platform/chrome/wilco_ec/event.c index 13291fb421..bd1fb53ba0 100644 --- a/drivers/platform/chrome/wilco_ec/event.c +++ b/drivers/platform/chrome/wilco_ec/event.c @@ -523,7 +523,6 @@ static struct acpi_driver event_driver = { .notify = event_device_notify, .remove = event_device_remove, }, - .owner = THIS_MODULE, }; static int __init event_module_init(void) @@ -575,4 +574,3 @@ module_exit(event_module_exit); MODULE_AUTHOR("Nick Crews <ncrews@chromium.org>"); MODULE_DESCRIPTION("Wilco EC ACPI event driver"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/platform/chrome/wilco_ec/sysfs.c b/drivers/platform/chrome/wilco_ec/sysfs.c index 893c59dde3..d44c435596 100644 --- a/drivers/platform/chrome/wilco_ec/sysfs.c +++ b/drivers/platform/chrome/wilco_ec/sysfs.c @@ -192,7 +192,7 @@ static ssize_t usb_charge_show(struct device *dev, if (ret < 0) return ret; - return sprintf(buf, "%d\n", rs.val); + return sysfs_emit(buf, "%d\n", rs.val); } static ssize_t usb_charge_store(struct device *dev, diff --git a/drivers/platform/chrome/wilco_ec/telemetry.c b/drivers/platform/chrome/wilco_ec/telemetry.c index b7c616f3d1..21d4cbbb00 100644 --- a/drivers/platform/chrome/wilco_ec/telemetry.c +++ b/drivers/platform/chrome/wilco_ec/telemetry.c @@ -30,6 +30,7 @@ #include <linux/cdev.h> #include <linux/device.h> #include <linux/fs.h> +#include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/platform_data/wilco-ec.h> #include <linux/platform_device.h> @@ -409,12 +410,19 @@ static void telem_device_remove(struct platform_device *pdev) put_device(&dev_data->dev); } +static const struct platform_device_id telem_id[] = { + { DRV_NAME, 0 }, + {} +}; +MODULE_DEVICE_TABLE(platform, telem_id); + static struct platform_driver telem_driver = { .probe = telem_device_probe, .remove_new = telem_device_remove, .driver = { .name = DRV_NAME, }, + .id_table = telem_id, }; static int __init telem_module_init(void) @@ -466,4 +474,3 @@ module_exit(telem_module_exit); MODULE_AUTHOR("Nick Crews <ncrews@chromium.org>"); MODULE_DESCRIPTION("Wilco EC telemetry driver"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/platform/mips/cpu_hwmon.c b/drivers/platform/mips/cpu_hwmon.c index d8c5f9195f..2ac2f31090 100644 --- a/drivers/platform/mips/cpu_hwmon.c +++ b/drivers/platform/mips/cpu_hwmon.c @@ -139,6 +139,9 @@ static int __init loongson_hwmon_init(void) csr_temp_enable = csr_readl(LOONGSON_CSR_FEATURES) & LOONGSON_CSRF_TEMP; + if (!csr_temp_enable && !loongson_chiptemp[0]) + return -ENODEV; + nr_packages = loongson_sysconf.nr_cpus / loongson_sysconf.cores_per_package; diff --git a/drivers/platform/surface/aggregator/core.c b/drivers/platform/surface/aggregator/core.c index ba550eaa06..797d0645bd 100644 --- a/drivers/platform/surface/aggregator/core.c +++ b/drivers/platform/surface/aggregator/core.c @@ -618,15 +618,17 @@ static const struct acpi_gpio_mapping ssam_acpi_gpios[] = { static int ssam_serial_hub_probe(struct serdev_device *serdev) { - struct acpi_device *ssh = ACPI_COMPANION(&serdev->dev); + struct device *dev = &serdev->dev; + struct acpi_device *ssh = ACPI_COMPANION(dev); struct ssam_controller *ctrl; acpi_status astatus; int status; - if (gpiod_count(&serdev->dev, NULL) < 0) - return -ENODEV; + status = gpiod_count(dev, NULL); + if (status < 0) + return dev_err_probe(dev, status, "no GPIO found\n"); - status = devm_acpi_dev_add_driver_gpios(&serdev->dev, ssam_acpi_gpios); + status = devm_acpi_dev_add_driver_gpios(dev, ssam_acpi_gpios); if (status) return status; @@ -637,8 +639,10 @@ static int ssam_serial_hub_probe(struct serdev_device *serdev) /* Initialize controller. */ status = ssam_controller_init(ctrl, serdev); - if (status) + if (status) { + dev_err_probe(dev, status, "failed to initialize ssam controller\n"); goto err_ctrl_init; + } ssam_controller_lock(ctrl); @@ -646,12 +650,14 @@ static int ssam_serial_hub_probe(struct serdev_device *serdev) serdev_device_set_drvdata(serdev, ctrl); serdev_device_set_client_ops(serdev, &ssam_serdev_ops); status = serdev_device_open(serdev); - if (status) + if (status) { + dev_err_probe(dev, status, "failed to open serdev device\n"); goto err_devopen; + } astatus = ssam_serdev_setup_via_acpi(ssh->handle, serdev); if (ACPI_FAILURE(astatus)) { - status = -ENXIO; + status = dev_err_probe(dev, -ENXIO, "failed to setup serdev\n"); goto err_devinit; } @@ -667,25 +673,33 @@ static int ssam_serial_hub_probe(struct serdev_device *serdev) * states. */ status = ssam_log_firmware_version(ctrl); - if (status) + if (status) { + dev_err_probe(dev, status, "failed to get firmware version\n"); goto err_initrq; + } status = ssam_ctrl_notif_d0_entry(ctrl); - if (status) + if (status) { + dev_err_probe(dev, status, "D0-entry notification failed\n"); goto err_initrq; + } status = ssam_ctrl_notif_display_on(ctrl); - if (status) + if (status) { + dev_err_probe(dev, status, "display-on notification failed\n"); goto err_initrq; + } - status = sysfs_create_group(&serdev->dev.kobj, &ssam_sam_group); + status = sysfs_create_group(&dev->kobj, &ssam_sam_group); if (status) goto err_initrq; /* Set up IRQ. */ status = ssam_irq_setup(ctrl); - if (status) + if (status) { + dev_err_probe(dev, status, "failed to setup IRQ\n"); goto err_irq; + } /* Finally, set main controller reference. */ status = ssam_try_set_controller(ctrl); @@ -702,7 +716,7 @@ static int ssam_serial_hub_probe(struct serdev_device *serdev) * resumed. In short, this causes some spurious unwanted wake-ups. * For now let's thus default power/wakeup to false. */ - device_set_wakeup_capable(&serdev->dev, true); + device_set_wakeup_capable(dev, true); acpi_dev_clear_dependencies(ssh); return 0; @@ -710,7 +724,7 @@ static int ssam_serial_hub_probe(struct serdev_device *serdev) err_mainref: ssam_irq_free(ctrl); err_irq: - sysfs_remove_group(&serdev->dev.kobj, &ssam_sam_group); + sysfs_remove_group(&dev->kobj, &ssam_sam_group); err_initrq: ssam_controller_lock(ctrl); ssam_controller_shutdown(ctrl); diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c index 035d6b4105..1c4d74db08 100644 --- a/drivers/platform/surface/surface_aggregator_registry.c +++ b/drivers/platform/surface/surface_aggregator_registry.c @@ -68,12 +68,32 @@ static const struct software_node ssam_node_bat_sb3base = { .parent = &ssam_node_hub_base, }; -/* Platform profile / performance-mode device. */ -static const struct software_node ssam_node_tmp_pprof = { +/* Platform profile / performance-mode device without a fan. */ +static const struct software_node ssam_node_tmp_perf_profile = { .name = "ssam:01:03:01:00:01", .parent = &ssam_node_root, }; +/* Platform profile / performance-mode device with a fan, such that + * the fan controller profile can also be switched. + */ +static const struct property_entry ssam_node_tmp_perf_profile_has_fan[] = { + PROPERTY_ENTRY_BOOL("has_fan"), + { } +}; + +static const struct software_node ssam_node_tmp_perf_profile_with_fan = { + .name = "ssam:01:03:01:00:01", + .parent = &ssam_node_root, + .properties = ssam_node_tmp_perf_profile_has_fan, +}; + +/* Thermal sensors. */ +static const struct software_node ssam_node_tmp_sensors = { + .name = "ssam:01:03:01:00:02", + .parent = &ssam_node_root, +}; + /* Fan speed function. */ static const struct software_node ssam_node_fan_speed = { .name = "ssam:01:05:01:01:01", @@ -208,7 +228,7 @@ static const struct software_node ssam_node_pos_tablet_switch = { */ static const struct software_node *ssam_node_group_gen5[] = { &ssam_node_root, - &ssam_node_tmp_pprof, + &ssam_node_tmp_perf_profile, NULL, }; @@ -219,7 +239,7 @@ static const struct software_node *ssam_node_group_sb3[] = { &ssam_node_bat_ac, &ssam_node_bat_main, &ssam_node_bat_sb3base, - &ssam_node_tmp_pprof, + &ssam_node_tmp_perf_profile, &ssam_node_bas_dtx, &ssam_node_hid_base_keyboard, &ssam_node_hid_base_touchpad, @@ -233,7 +253,7 @@ static const struct software_node *ssam_node_group_sl3[] = { &ssam_node_root, &ssam_node_bat_ac, &ssam_node_bat_main, - &ssam_node_tmp_pprof, + &ssam_node_tmp_perf_profile, &ssam_node_hid_main_keyboard, &ssam_node_hid_main_touchpad, &ssam_node_hid_main_iid5, @@ -245,7 +265,7 @@ static const struct software_node *ssam_node_group_sl5[] = { &ssam_node_root, &ssam_node_bat_ac, &ssam_node_bat_main, - &ssam_node_tmp_pprof, + &ssam_node_tmp_perf_profile, &ssam_node_hid_main_keyboard, &ssam_node_hid_main_touchpad, &ssam_node_hid_main_iid5, @@ -258,7 +278,7 @@ static const struct software_node *ssam_node_group_sls[] = { &ssam_node_root, &ssam_node_bat_ac, &ssam_node_bat_main, - &ssam_node_tmp_pprof, + &ssam_node_tmp_perf_profile, &ssam_node_pos_tablet_switch, &ssam_node_hid_sam_keyboard, &ssam_node_hid_sam_penstash, @@ -274,7 +294,7 @@ static const struct software_node *ssam_node_group_slg1[] = { &ssam_node_root, &ssam_node_bat_ac, &ssam_node_bat_main, - &ssam_node_tmp_pprof, + &ssam_node_tmp_perf_profile, NULL, }; @@ -283,7 +303,7 @@ static const struct software_node *ssam_node_group_sp7[] = { &ssam_node_root, &ssam_node_bat_ac, &ssam_node_bat_main, - &ssam_node_tmp_pprof, + &ssam_node_tmp_perf_profile, NULL, }; @@ -293,7 +313,7 @@ static const struct software_node *ssam_node_group_sp8[] = { &ssam_node_hub_kip, &ssam_node_bat_ac, &ssam_node_bat_main, - &ssam_node_tmp_pprof, + &ssam_node_tmp_perf_profile, &ssam_node_kip_tablet_switch, &ssam_node_hid_kip_keyboard, &ssam_node_hid_kip_penstash, @@ -310,7 +330,8 @@ static const struct software_node *ssam_node_group_sp9[] = { &ssam_node_hub_kip, &ssam_node_bat_ac, &ssam_node_bat_main, - &ssam_node_tmp_pprof, + &ssam_node_tmp_perf_profile_with_fan, + &ssam_node_tmp_sensors, &ssam_node_fan_speed, &ssam_node_pos_tablet_switch, &ssam_node_hid_kip_keyboard, diff --git a/drivers/platform/surface/surface_platform_profile.c b/drivers/platform/surface/surface_platform_profile.c index a5a3941b3f..3de864bc66 100644 --- a/drivers/platform/surface/surface_platform_profile.c +++ b/drivers/platform/surface/surface_platform_profile.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0+ /* * Surface Platform Profile / Performance Mode driver for Surface System - * Aggregator Module (thermal subsystem). + * Aggregator Module (thermal and fan subsystem). * * Copyright (C) 2021-2022 Maximilian Luz <luzmaximilian@gmail.com> */ @@ -14,6 +14,7 @@ #include <linux/surface_aggregator/device.h> +// Enum for the platform performance profile sent to the TMP module. enum ssam_tmp_profile { SSAM_TMP_PROFILE_NORMAL = 1, SSAM_TMP_PROFILE_BATTERY_SAVER = 2, @@ -21,15 +22,26 @@ enum ssam_tmp_profile { SSAM_TMP_PROFILE_BEST_PERFORMANCE = 4, }; +// Enum for the fan profile sent to the FAN module. This fan profile is +// only sent to the EC if the 'has_fan' property is set. The integers are +// not a typo, they differ from the performance profile indices. +enum ssam_fan_profile { + SSAM_FAN_PROFILE_NORMAL = 2, + SSAM_FAN_PROFILE_BATTERY_SAVER = 1, + SSAM_FAN_PROFILE_BETTER_PERFORMANCE = 3, + SSAM_FAN_PROFILE_BEST_PERFORMANCE = 4, +}; + struct ssam_tmp_profile_info { __le32 profile; __le16 unknown1; __le16 unknown2; } __packed; -struct ssam_tmp_profile_device { +struct ssam_platform_profile_device { struct ssam_device *sdev; struct platform_profile_handler handler; + bool has_fan; }; SSAM_DEFINE_SYNC_REQUEST_CL_R(__ssam_tmp_profile_get, struct ssam_tmp_profile_info, { @@ -42,6 +54,13 @@ SSAM_DEFINE_SYNC_REQUEST_CL_W(__ssam_tmp_profile_set, __le32, { .command_id = 0x03, }); +SSAM_DEFINE_SYNC_REQUEST_W(__ssam_fan_profile_set, u8, { + .target_category = SSAM_SSH_TC_FAN, + .target_id = SSAM_SSH_TID_SAM, + .command_id = 0x0e, + .instance_id = 0x01, +}); + static int ssam_tmp_profile_get(struct ssam_device *sdev, enum ssam_tmp_profile *p) { struct ssam_tmp_profile_info info; @@ -57,12 +76,19 @@ static int ssam_tmp_profile_get(struct ssam_device *sdev, enum ssam_tmp_profile static int ssam_tmp_profile_set(struct ssam_device *sdev, enum ssam_tmp_profile p) { - __le32 profile_le = cpu_to_le32(p); + const __le32 profile_le = cpu_to_le32(p); return ssam_retry(__ssam_tmp_profile_set, sdev, &profile_le); } -static int convert_ssam_to_profile(struct ssam_device *sdev, enum ssam_tmp_profile p) +static int ssam_fan_profile_set(struct ssam_device *sdev, enum ssam_fan_profile p) +{ + const u8 profile = p; + + return ssam_retry(__ssam_fan_profile_set, sdev->ctrl, &profile); +} + +static int convert_ssam_tmp_to_profile(struct ssam_device *sdev, enum ssam_tmp_profile p) { switch (p) { case SSAM_TMP_PROFILE_NORMAL: @@ -83,7 +109,8 @@ static int convert_ssam_to_profile(struct ssam_device *sdev, enum ssam_tmp_profi } } -static int convert_profile_to_ssam(struct ssam_device *sdev, enum platform_profile_option p) + +static int convert_profile_to_ssam_tmp(struct ssam_device *sdev, enum platform_profile_option p) { switch (p) { case PLATFORM_PROFILE_LOW_POWER: @@ -105,20 +132,42 @@ static int convert_profile_to_ssam(struct ssam_device *sdev, enum platform_profi } } +static int convert_profile_to_ssam_fan(struct ssam_device *sdev, enum platform_profile_option p) +{ + switch (p) { + case PLATFORM_PROFILE_LOW_POWER: + return SSAM_FAN_PROFILE_BATTERY_SAVER; + + case PLATFORM_PROFILE_BALANCED: + return SSAM_FAN_PROFILE_NORMAL; + + case PLATFORM_PROFILE_BALANCED_PERFORMANCE: + return SSAM_FAN_PROFILE_BETTER_PERFORMANCE; + + case PLATFORM_PROFILE_PERFORMANCE: + return SSAM_FAN_PROFILE_BEST_PERFORMANCE; + + default: + /* This should have already been caught by platform_profile_store(). */ + WARN(true, "unsupported platform profile"); + return -EOPNOTSUPP; + } +} + static int ssam_platform_profile_get(struct platform_profile_handler *pprof, enum platform_profile_option *profile) { - struct ssam_tmp_profile_device *tpd; + struct ssam_platform_profile_device *tpd; enum ssam_tmp_profile tp; int status; - tpd = container_of(pprof, struct ssam_tmp_profile_device, handler); + tpd = container_of(pprof, struct ssam_platform_profile_device, handler); status = ssam_tmp_profile_get(tpd->sdev, &tp); if (status) return status; - status = convert_ssam_to_profile(tpd->sdev, tp); + status = convert_ssam_tmp_to_profile(tpd->sdev, tp); if (status < 0) return status; @@ -129,21 +178,32 @@ static int ssam_platform_profile_get(struct platform_profile_handler *pprof, static int ssam_platform_profile_set(struct platform_profile_handler *pprof, enum platform_profile_option profile) { - struct ssam_tmp_profile_device *tpd; + struct ssam_platform_profile_device *tpd; int tp; - tpd = container_of(pprof, struct ssam_tmp_profile_device, handler); + tpd = container_of(pprof, struct ssam_platform_profile_device, handler); + + tp = convert_profile_to_ssam_tmp(tpd->sdev, profile); + if (tp < 0) + return tp; - tp = convert_profile_to_ssam(tpd->sdev, profile); + tp = ssam_tmp_profile_set(tpd->sdev, tp); if (tp < 0) return tp; - return ssam_tmp_profile_set(tpd->sdev, tp); + if (tpd->has_fan) { + tp = convert_profile_to_ssam_fan(tpd->sdev, profile); + if (tp < 0) + return tp; + tp = ssam_fan_profile_set(tpd->sdev, tp); + } + + return tp; } static int surface_platform_profile_probe(struct ssam_device *sdev) { - struct ssam_tmp_profile_device *tpd; + struct ssam_platform_profile_device *tpd; tpd = devm_kzalloc(&sdev->dev, sizeof(*tpd), GFP_KERNEL); if (!tpd) @@ -154,6 +214,8 @@ static int surface_platform_profile_probe(struct ssam_device *sdev) tpd->handler.profile_get = ssam_platform_profile_get; tpd->handler.profile_set = ssam_platform_profile_set; + tpd->has_fan = device_property_read_bool(&sdev->dev, "has_fan"); + set_bit(PLATFORM_PROFILE_LOW_POWER, tpd->handler.choices); set_bit(PLATFORM_PROFILE_BALANCED, tpd->handler.choices); set_bit(PLATFORM_PROFILE_BALANCED_PERFORMANCE, tpd->handler.choices); diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 7e9251fc33..665fa95249 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -133,6 +133,18 @@ config YOGABOOK To compile this driver as a module, choose M here: the module will be called lenovo-yogabook. +config YT2_1380 + tristate "Lenovo Yoga Tablet 2 1380 fast charge driver" + depends on SERIAL_DEV_BUS + depends on EXTCON + depends on ACPI + help + Say Y here to enable support for the custom fast charging protocol + found on the Lenovo Yoga Tablet 2 1380F / 1380L models. + + To compile this driver as a module, choose M here: the module will + be called lenovo-yogabook. + config ACERHDF tristate "Acer Aspire One temperature and fan driver" depends on ACPI && THERMAL @@ -504,6 +516,7 @@ config THINKPAD_ACPI select NVRAM select NEW_LEDS select LEDS_CLASS + select INPUT_SPARSEKMAP help This is a driver for the IBM and Lenovo ThinkPad laptops. It adds support for Fn-Fx key combinations, Bluetooth control, video @@ -642,6 +655,30 @@ config THINKPAD_LMI source "drivers/platform/x86/intel/Kconfig" +config ACPI_QUICKSTART + tristate "ACPI Quickstart button driver" + depends on ACPI + depends on INPUT + select INPUT_SPARSEKMAP + help + This driver adds support for ACPI quickstart button (PNP0C32) devices. + The button emits a manufacturer-specific key value when pressed, so + userspace has to map this value to a standard key code. + + To compile this driver as a module, choose M here: the module will be + called quickstart. + +config MEEGOPAD_ANX7428 + tristate "MeeGoPad ANX7428 Type-C Switch" + depends on ACPI && GPIOLIB && I2C + help + Some MeeGoPad top-set boxes have an ANX7428 Type-C Switch for + USB3.1 Gen 1 and DisplayPort over Type-C alternate mode support. + + This driver takes care of powering on the ANX7428 on supported + MeeGoPad top-set boxes. After this the ANX7428 takes care of Type-C + connector orientation and PD alternate mode switching autonomously. + config MSI_EC tristate "MSI EC Extras" depends on ACPI @@ -685,6 +722,17 @@ config MSI_WMI To compile this driver as a module, choose M here: the module will be called msi-wmi. +config MSI_WMI_PLATFORM + tristate "MSI WMI Platform features" + depends on ACPI_WMI + depends on HWMON + help + Say Y here if you want to have support for WMI-based platform features + like fan sensor access on MSI machines. + + To compile this driver as a module, choose M here: the module will + be called msi-wmi-platform. + config XO15_EBOOK tristate "OLPC XO-1.5 ebook switch" depends on OLPC || COMPILE_TEST @@ -996,6 +1044,18 @@ config INSPUR_PLATFORM_PROFILE To compile this driver as a module, choose M here: the module will be called inspur-platform-profile. +config LENOVO_WMI_CAMERA + tristate "Lenovo WMI Camera Button driver" + depends on ACPI_WMI + depends on INPUT + help + This driver provides support for Lenovo camera button. The Camera + button is a GPIO device. This driver receives ACPI notifications when + the camera button is switched on/off. + + To compile this driver as a module, choose M here: the module + will be called lenovo-wmi-camera. + source "drivers/platform/x86/x86-android-tablets/Kconfig" config FW_ATTR_CLASS diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index 1de432e886..e1b1429470 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -66,14 +66,23 @@ obj-$(CONFIG_SENSORS_HDAPS) += hdaps.o obj-$(CONFIG_THINKPAD_ACPI) += thinkpad_acpi.o obj-$(CONFIG_THINKPAD_LMI) += think-lmi.o obj-$(CONFIG_YOGABOOK) += lenovo-yogabook.o +obj-$(CONFIG_YT2_1380) += lenovo-yoga-tab2-pro-1380-fastcharger.o +obj-$(CONFIG_LENOVO_WMI_CAMERA) += lenovo-wmi-camera.o # Intel obj-y += intel/ +# Microsoft +obj-$(CONFIG_ACPI_QUICKSTART) += quickstart.o + +# MeeGoPad +obj-$(CONFIG_MEEGOPAD_ANX7428) += meegopad_anx7428.o + # MSI obj-$(CONFIG_MSI_EC) += msi-ec.o obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o obj-$(CONFIG_MSI_WMI) += msi-wmi.o +obj-$(CONFIG_MSI_WMI_PLATFORM) += msi-wmi-platform.o # OLPC obj-$(CONFIG_XO15_EBOOK) += xo15-ebook.o diff --git a/drivers/platform/x86/amd/hsmp.c b/drivers/platform/x86/amd/hsmp.c index 272d32a95e..8fcf38eed7 100644 --- a/drivers/platform/x86/amd/hsmp.c +++ b/drivers/platform/x86/amd/hsmp.c @@ -693,7 +693,7 @@ static int hsmp_create_non_acpi_sysfs_if(struct device *dev) hsmp_create_attr_list(attr_grp, dev, i); } - return devm_device_add_groups(dev, hsmp_attr_grps); + return device_add_groups(dev, hsmp_attr_grps); } static int hsmp_create_acpi_sysfs_if(struct device *dev) diff --git a/drivers/platform/x86/amd/pmc/Kconfig b/drivers/platform/x86/amd/pmc/Kconfig index 883c0a95ac..94f9563d8b 100644 --- a/drivers/platform/x86/amd/pmc/Kconfig +++ b/drivers/platform/x86/amd/pmc/Kconfig @@ -18,3 +18,18 @@ config AMD_PMC If you choose to compile this driver as a module the module will be called amd-pmc. + +config AMD_MP2_STB + bool "AMD SoC MP2 STB function" + depends on AMD_PMC + default AMD_PMC + help + AMD MP2 STB function provides a data buffer used to log debug + information about the system execution during S2Idle suspend/resume. + A data buffer known as the STB (Smart Trace Buffer) is a circular + buffer which is a low-level log for the SoC which is used to debug + any hangs/stalls during S2Idle suspend/resume. + + Creates debugfs to get STB, a userspace daemon can access STB log of + last S2Idle suspend/resume which can help to debug if hangs/stalls + during S2Idle suspend/resume. diff --git a/drivers/platform/x86/amd/pmc/Makefile b/drivers/platform/x86/amd/pmc/Makefile index 4aaa29d351..f1d9ab19d2 100644 --- a/drivers/platform/x86/amd/pmc/Makefile +++ b/drivers/platform/x86/amd/pmc/Makefile @@ -6,3 +6,4 @@ amd-pmc-objs := pmc.o pmc-quirks.o obj-$(CONFIG_AMD_PMC) += amd-pmc.o +amd-pmc-$(CONFIG_AMD_MP2_STB) += mp2_stb.o diff --git a/drivers/platform/x86/amd/pmc/mp2_stb.c b/drivers/platform/x86/amd/pmc/mp2_stb.c new file mode 100644 index 0000000000..9775ddc1b2 --- /dev/null +++ b/drivers/platform/x86/amd/pmc/mp2_stb.c @@ -0,0 +1,280 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * AMD MP2 STB layer + * + * Copyright (c) 2024, Advanced Micro Devices, Inc. + * All Rights Reserved. + * + * Author: Basavaraj Natikar <Basavaraj.Natikar@amd.com> + */ + +#include <linux/debugfs.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/io-64-nonatomic-lo-hi.h> +#include <linux/iopoll.h> +#include <linux/pci.h> +#include <linux/sizes.h> +#include <linux/time.h> + +#include "pmc.h" + +#define VALID_MSG 0xA +#define VALID_RESPONSE 2 + +#define AMD_C2P_MSG0 0x10500 +#define AMD_C2P_MSG1 0x10504 +#define AMD_P2C_MSG0 0x10680 +#define AMD_P2C_MSG1 0x10684 + +#define MP2_RESP_SLEEP_US 500 +#define MP2_RESP_TIMEOUT_US (1600 * USEC_PER_MSEC) + +#define MP2_STB_DATA_LEN_2KB 1 +#define MP2_STB_DATA_LEN_16KB 4 + +#define MP2_MMIO_BAR 2 + +struct mp2_cmd_base { + union { + u32 ul; + struct { + u32 cmd_id : 4; + u32 intr_disable : 1; + u32 is_dma_used : 1; + u32 rsvd : 26; + } field; + }; +}; + +struct mp2_cmd_response { + union { + u32 resp; + struct { + u32 cmd_id : 4; + u32 status : 4; + u32 response : 4; + u32 rsvd2 : 20; + } field; + }; +}; + +struct mp2_stb_data_valid { + union { + u32 data_valid; + struct { + u32 valid : 16; + u32 length : 16; + } val; + }; +}; + +static int amd_mp2_wait_response(struct amd_mp2_dev *mp2, u8 cmd_id, u32 command_sts) +{ + struct mp2_cmd_response cmd_resp; + + if (!readl_poll_timeout(mp2->mmio + AMD_P2C_MSG0, cmd_resp.resp, + (cmd_resp.field.response == 0x0 && + cmd_resp.field.status == command_sts && + cmd_resp.field.cmd_id == cmd_id), MP2_RESP_SLEEP_US, + MP2_RESP_TIMEOUT_US)) + return cmd_resp.field.status; + + return -ETIMEDOUT; +} + +static void amd_mp2_stb_send_cmd(struct amd_mp2_dev *mp2, u8 cmd_id, bool is_dma_used) +{ + struct mp2_cmd_base cmd_base; + + cmd_base.ul = 0; + cmd_base.field.cmd_id = cmd_id; + cmd_base.field.intr_disable = 1; + cmd_base.field.is_dma_used = is_dma_used; + + writeq(mp2->dma_addr, mp2->mmio + AMD_C2P_MSG1); + writel(cmd_base.ul, mp2->mmio + AMD_C2P_MSG0); +} + +static int amd_mp2_stb_region(struct amd_mp2_dev *mp2) +{ + struct device *dev = &mp2->pdev->dev; + unsigned int len = mp2->stb_len; + + if (!mp2->stbdata) { + mp2->vslbase = dmam_alloc_coherent(dev, len, &mp2->dma_addr, GFP_KERNEL); + if (!mp2->vslbase) + return -ENOMEM; + + mp2->stbdata = devm_kzalloc(dev, len, GFP_KERNEL); + if (!mp2->stbdata) + return -ENOMEM; + } + + return 0; +} + +static int amd_mp2_process_cmd(struct amd_mp2_dev *mp2, struct file *filp) +{ + struct device *dev = &mp2->pdev->dev; + struct mp2_stb_data_valid stb_dv; + int status; + + stb_dv.data_valid = readl(mp2->mmio + AMD_P2C_MSG1); + + if (stb_dv.val.valid != VALID_MSG) { + dev_dbg(dev, "Invalid STB data\n"); + return -EBADMSG; + } + + if (stb_dv.val.length != MP2_STB_DATA_LEN_2KB && + stb_dv.val.length != MP2_STB_DATA_LEN_16KB) { + dev_dbg(dev, "Unsupported length\n"); + return -EMSGSIZE; + } + + mp2->stb_len = BIT(stb_dv.val.length) * SZ_1K; + + status = amd_mp2_stb_region(mp2); + if (status) { + dev_err(dev, "Failed to init STB region, status %d\n", status); + return status; + } + + amd_mp2_stb_send_cmd(mp2, VALID_MSG, true); + status = amd_mp2_wait_response(mp2, VALID_MSG, VALID_RESPONSE); + if (status == VALID_RESPONSE) { + memcpy_fromio(mp2->stbdata, mp2->vslbase, mp2->stb_len); + filp->private_data = mp2->stbdata; + mp2->is_stb_data = true; + } else { + dev_err(dev, "Failed to start STB dump, status %d\n", status); + return -EOPNOTSUPP; + } + + return 0; +} + +static int amd_mp2_stb_debugfs_open(struct inode *inode, struct file *filp) +{ + struct amd_pmc_dev *dev = filp->f_inode->i_private; + struct amd_mp2_dev *mp2 = dev->mp2; + + if (mp2) { + if (!mp2->is_stb_data) + return amd_mp2_process_cmd(mp2, filp); + + filp->private_data = mp2->stbdata; + + return 0; + } + + return -ENODEV; +} + +static ssize_t amd_mp2_stb_debugfs_read(struct file *filp, char __user *buf, size_t size, + loff_t *pos) +{ + struct amd_pmc_dev *dev = filp->f_inode->i_private; + struct amd_mp2_dev *mp2 = dev->mp2; + + if (!mp2) + return -ENODEV; + + if (!filp->private_data) + return -EINVAL; + + return simple_read_from_buffer(buf, size, pos, filp->private_data, mp2->stb_len); +} + +static const struct file_operations amd_mp2_stb_debugfs_fops = { + .owner = THIS_MODULE, + .open = amd_mp2_stb_debugfs_open, + .read = amd_mp2_stb_debugfs_read, +}; + +static void amd_mp2_dbgfs_register(struct amd_pmc_dev *dev) +{ + if (!dev->dbgfs_dir) + return; + + debugfs_create_file("stb_read_previous_boot", 0644, dev->dbgfs_dir, dev, + &amd_mp2_stb_debugfs_fops); +} + +void amd_mp2_stb_deinit(struct amd_pmc_dev *dev) +{ + struct amd_mp2_dev *mp2 = dev->mp2; + struct pci_dev *pdev; + + if (mp2 && mp2->pdev) { + pdev = mp2->pdev; + + if (mp2->mmio) + pci_clear_master(pdev); + + pci_dev_put(pdev); + + if (mp2->devres_gid) + devres_release_group(&pdev->dev, mp2->devres_gid); + + dev->mp2 = NULL; + } +} + +void amd_mp2_stb_init(struct amd_pmc_dev *dev) +{ + struct amd_mp2_dev *mp2 = NULL; + struct pci_dev *pdev; + int rc; + + mp2 = devm_kzalloc(dev->dev, sizeof(*mp2), GFP_KERNEL); + if (!mp2) + return; + + pdev = pci_get_device(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_MP2_STB, NULL); + if (!pdev) + return; + + dev->mp2 = mp2; + mp2->pdev = pdev; + + mp2->devres_gid = devres_open_group(&pdev->dev, NULL, GFP_KERNEL); + if (!mp2->devres_gid) { + dev_err(&pdev->dev, "devres_open_group failed\n"); + goto mp2_error; + } + + rc = pcim_enable_device(pdev); + if (rc) { + dev_err(&pdev->dev, "pcim_enable_device failed\n"); + goto mp2_error; + } + + rc = pcim_iomap_regions(pdev, BIT(MP2_MMIO_BAR), "mp2 stb"); + if (rc) { + dev_err(&pdev->dev, "pcim_iomap_regions failed\n"); + goto mp2_error; + } + + mp2->mmio = pcim_iomap_table(pdev)[MP2_MMIO_BAR]; + if (!mp2->mmio) { + dev_err(&pdev->dev, "pcim_iomap_table failed\n"); + goto mp2_error; + } + + pci_set_master(pdev); + + rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); + if (rc) { + dev_err(&pdev->dev, "failed to set DMA mask\n"); + goto mp2_error; + } + + amd_mp2_dbgfs_register(dev); + + return; + +mp2_error: + amd_mp2_stb_deinit(dev); +} diff --git a/drivers/platform/x86/amd/pmc/pmc.c b/drivers/platform/x86/amd/pmc/pmc.c index 108e12fd58..a3d881f6e5 100644 --- a/drivers/platform/x86/amd/pmc/pmc.c +++ b/drivers/platform/x86/amd/pmc/pmc.c @@ -1106,6 +1106,8 @@ static int amd_pmc_probe(struct platform_device *pdev) } amd_pmc_dbgfs_register(dev); + if (IS_ENABLED(CONFIG_AMD_MP2_STB)) + amd_mp2_stb_init(dev); pm_report_max_hw_sleep(U64_MAX); return 0; @@ -1122,6 +1124,8 @@ static void amd_pmc_remove(struct platform_device *pdev) acpi_unregister_lps0_dev(&amd_pmc_s2idle_dev_ops); amd_pmc_dbgfs_unregister(dev); pci_dev_put(dev->rdev); + if (IS_ENABLED(CONFIG_AMD_MP2_STB)) + amd_mp2_stb_deinit(dev); mutex_destroy(&dev->lock); } @@ -1132,6 +1136,7 @@ static const struct acpi_device_id amd_pmc_acpi_ids[] = { {"AMDI0008", 0}, {"AMDI0009", 0}, {"AMDI000A", 0}, + {"AMDI000B", 0}, {"AMD0004", 0}, {"AMD0005", 0}, { } diff --git a/drivers/platform/x86/amd/pmc/pmc.h b/drivers/platform/x86/amd/pmc/pmc.h index 827eef65e1..9e32d3128c 100644 --- a/drivers/platform/x86/amd/pmc/pmc.h +++ b/drivers/platform/x86/amd/pmc/pmc.h @@ -14,6 +14,17 @@ #include <linux/types.h> #include <linux/mutex.h> +struct amd_mp2_dev { + void __iomem *mmio; + void __iomem *vslbase; + void *stbdata; + void *devres_gid; + struct pci_dev *pdev; + dma_addr_t dma_addr; + int stb_len; + bool is_stb_data; +}; + struct amd_pmc_dev { void __iomem *regbase; void __iomem *smu_virt_addr; @@ -38,10 +49,13 @@ struct amd_pmc_dev { struct dentry *dbgfs_dir; struct quirk_entry *quirks; bool disable_8042_wakeup; + struct amd_mp2_dev *mp2; }; void amd_pmc_process_restore_quirks(struct amd_pmc_dev *dev); void amd_pmc_quirks_init(struct amd_pmc_dev *dev); +void amd_mp2_stb_init(struct amd_pmc_dev *dev); +void amd_mp2_stb_deinit(struct amd_pmc_dev *dev); /* List of supported CPU ids */ #define AMD_CPU_ID_RV 0x15D0 @@ -53,5 +67,6 @@ void amd_pmc_quirks_init(struct amd_pmc_dev *dev); #define AMD_CPU_ID_PS 0x14E8 #define AMD_CPU_ID_SP 0x14A4 #define PCI_DEVICE_ID_AMD_1AH_M20H_ROOT 0x1507 +#define PCI_DEVICE_ID_AMD_MP2_STB 0x172c #endif /* PMC_H */ diff --git a/drivers/platform/x86/amd/pmf/core.c b/drivers/platform/x86/amd/pmf/core.c index 64e6e34a2a..2d6e255886 100644 --- a/drivers/platform/x86/amd/pmf/core.c +++ b/drivers/platform/x86/amd/pmf/core.c @@ -381,6 +381,7 @@ static const struct acpi_device_id amd_pmf_acpi_ids[] = { {"AMDI0100", 0x100}, {"AMDI0102", 0}, {"AMDI0103", 0}, + {"AMDI0105", 0}, { } }; MODULE_DEVICE_TABLE(acpi, amd_pmf_acpi_ids); diff --git a/drivers/platform/x86/amilo-rfkill.c b/drivers/platform/x86/amilo-rfkill.c index efcf909786..2423dc91de 100644 --- a/drivers/platform/x86/amilo-rfkill.c +++ b/drivers/platform/x86/amilo-rfkill.c @@ -171,6 +171,7 @@ static void __exit amilo_rfkill_exit(void) } MODULE_AUTHOR("Ben Hutchings <ben@decadent.org.uk>"); +MODULE_DESCRIPTION("Fujitsu-Siemens Amilo rfkill support"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(dmi, amilo_rfkill_id_table); diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c index bf03ea1b12..ccb33d034e 100644 --- a/drivers/platform/x86/asus-laptop.c +++ b/drivers/platform/x86/asus-laptop.c @@ -852,8 +852,8 @@ static ssize_t infos_show(struct device *dev, struct device_attribute *attr, * so we don't set eof to 1 */ - len += sprintf(page, ASUS_LAPTOP_NAME " " ASUS_LAPTOP_VERSION "\n"); - len += sprintf(page + len, "Model reference : %s\n", asus->name); + len += sysfs_emit_at(page, len, ASUS_LAPTOP_NAME " " ASUS_LAPTOP_VERSION "\n"); + len += sysfs_emit_at(page, len, "Model reference : %s\n", asus->name); /* * The SFUN method probably allows the original driver to get the list * of features supported by a given model. For now, 0x0100 or 0x0800 @@ -862,7 +862,7 @@ static ssize_t infos_show(struct device *dev, struct device_attribute *attr, */ rv = acpi_evaluate_integer(asus->handle, "SFUN", NULL, &temp); if (ACPI_SUCCESS(rv)) - len += sprintf(page + len, "SFUN value : %#x\n", + len += sysfs_emit_at(page, len, "SFUN value : %#x\n", (uint) temp); /* * The HWRS method return informations about the hardware. @@ -874,7 +874,7 @@ static ssize_t infos_show(struct device *dev, struct device_attribute *attr, */ rv = acpi_evaluate_integer(asus->handle, "HWRS", NULL, &temp); if (ACPI_SUCCESS(rv)) - len += sprintf(page + len, "HWRS value : %#x\n", + len += sysfs_emit_at(page, len, "HWRS value : %#x\n", (uint) temp); /* * Another value for userspace: the ASYM method returns 0x02 for @@ -885,25 +885,25 @@ static ssize_t infos_show(struct device *dev, struct device_attribute *attr, */ rv = acpi_evaluate_integer(asus->handle, "ASYM", NULL, &temp); if (ACPI_SUCCESS(rv)) - len += sprintf(page + len, "ASYM value : %#x\n", + len += sysfs_emit_at(page, len, "ASYM value : %#x\n", (uint) temp); if (asus->dsdt_info) { snprintf(buf, 16, "%d", asus->dsdt_info->length); - len += sprintf(page + len, "DSDT length : %s\n", buf); + len += sysfs_emit_at(page, len, "DSDT length : %s\n", buf); snprintf(buf, 16, "%d", asus->dsdt_info->checksum); - len += sprintf(page + len, "DSDT checksum : %s\n", buf); + len += sysfs_emit_at(page, len, "DSDT checksum : %s\n", buf); snprintf(buf, 16, "%d", asus->dsdt_info->revision); - len += sprintf(page + len, "DSDT revision : %s\n", buf); + len += sysfs_emit_at(page, len, "DSDT revision : %s\n", buf); snprintf(buf, 7, "%s", asus->dsdt_info->oem_id); - len += sprintf(page + len, "OEM id : %s\n", buf); + len += sysfs_emit_at(page, len, "OEM id : %s\n", buf); snprintf(buf, 9, "%s", asus->dsdt_info->oem_table_id); - len += sprintf(page + len, "OEM table id : %s\n", buf); + len += sysfs_emit_at(page, len, "OEM table id : %s\n", buf); snprintf(buf, 16, "%x", asus->dsdt_info->oem_revision); - len += sprintf(page + len, "OEM revision : 0x%s\n", buf); + len += sysfs_emit_at(page, len, "OEM revision : 0x%s\n", buf); snprintf(buf, 5, "%s", asus->dsdt_info->asl_compiler_id); - len += sprintf(page + len, "ASL comp vendor id : %s\n", buf); + len += sysfs_emit_at(page, len, "ASL comp vendor id : %s\n", buf); snprintf(buf, 16, "%x", asus->dsdt_info->asl_compiler_revision); - len += sprintf(page + len, "ASL comp revision : 0x%s\n", buf); + len += sysfs_emit_at(page, len, "ASL comp revision : 0x%s\n", buf); } return len; @@ -933,7 +933,7 @@ static ssize_t ledd_show(struct device *dev, struct device_attribute *attr, { struct asus_laptop *asus = dev_get_drvdata(dev); - return sprintf(buf, "0x%08x\n", asus->ledd_status); + return sysfs_emit(buf, "0x%08x\n", asus->ledd_status); } static ssize_t ledd_store(struct device *dev, struct device_attribute *attr, @@ -993,7 +993,7 @@ static ssize_t wlan_show(struct device *dev, struct device_attribute *attr, { struct asus_laptop *asus = dev_get_drvdata(dev); - return sprintf(buf, "%d\n", asus_wireless_status(asus, WL_RSTS)); + return sysfs_emit(buf, "%d\n", asus_wireless_status(asus, WL_RSTS)); } static ssize_t wlan_store(struct device *dev, struct device_attribute *attr, @@ -1022,7 +1022,7 @@ static ssize_t bluetooth_show(struct device *dev, struct device_attribute *attr, { struct asus_laptop *asus = dev_get_drvdata(dev); - return sprintf(buf, "%d\n", asus_wireless_status(asus, BT_RSTS)); + return sysfs_emit(buf, "%d\n", asus_wireless_status(asus, BT_RSTS)); } static ssize_t bluetooth_store(struct device *dev, @@ -1052,7 +1052,7 @@ static ssize_t wimax_show(struct device *dev, struct device_attribute *attr, { struct asus_laptop *asus = dev_get_drvdata(dev); - return sprintf(buf, "%d\n", asus_wireless_status(asus, WM_RSTS)); + return sysfs_emit(buf, "%d\n", asus_wireless_status(asus, WM_RSTS)); } static ssize_t wimax_store(struct device *dev, struct device_attribute *attr, @@ -1081,7 +1081,7 @@ static ssize_t wwan_show(struct device *dev, struct device_attribute *attr, { struct asus_laptop *asus = dev_get_drvdata(dev); - return sprintf(buf, "%d\n", asus_wireless_status(asus, WW_RSTS)); + return sysfs_emit(buf, "%d\n", asus_wireless_status(asus, WW_RSTS)); } static ssize_t wwan_store(struct device *dev, struct device_attribute *attr, @@ -1151,7 +1151,7 @@ static ssize_t ls_switch_show(struct device *dev, struct device_attribute *attr, { struct asus_laptop *asus = dev_get_drvdata(dev); - return sprintf(buf, "%d\n", asus->light_switch); + return sysfs_emit(buf, "%d\n", asus->light_switch); } static ssize_t ls_switch_store(struct device *dev, @@ -1182,7 +1182,7 @@ static ssize_t ls_level_show(struct device *dev, struct device_attribute *attr, { struct asus_laptop *asus = dev_get_drvdata(dev); - return sprintf(buf, "%d\n", asus->light_level); + return sysfs_emit(buf, "%d\n", asus->light_level); } static ssize_t ls_level_store(struct device *dev, struct device_attribute *attr, @@ -1228,7 +1228,7 @@ static ssize_t ls_value_show(struct device *dev, struct device_attribute *attr, if (!err) err = pega_int_read(asus, PEGA_READ_ALS_L, &lo); if (!err) - return sprintf(buf, "%d\n", 10 * hi + lo); + return sysfs_emit(buf, "%d\n", 10 * hi + lo); return err; } static DEVICE_ATTR_RO(ls_value); @@ -1264,7 +1264,7 @@ static ssize_t gps_show(struct device *dev, struct device_attribute *attr, { struct asus_laptop *asus = dev_get_drvdata(dev); - return sprintf(buf, "%d\n", asus_gps_status(asus)); + return sysfs_emit(buf, "%d\n", asus_gps_status(asus)); } static ssize_t gps_store(struct device *dev, struct device_attribute *attr, @@ -1925,7 +1925,6 @@ MODULE_DEVICE_TABLE(acpi, asus_device_ids); static struct acpi_driver asus_acpi_driver = { .name = ASUS_LAPTOP_NAME, .class = ASUS_LAPTOP_CLASS, - .owner = THIS_MODULE, .ids = asus_device_ids, .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS, .ops = { diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index 3f07bbf809..bc9c5db383 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -126,10 +126,21 @@ module_param(fnlock_default, bool, 0444); #define ASUS_SCREENPAD_BRIGHT_MAX 255 #define ASUS_SCREENPAD_BRIGHT_DEFAULT 60 +#define ASUS_MINI_LED_MODE_MASK 0x03 +/* Standard modes for devices with only on/off */ +#define ASUS_MINI_LED_OFF 0x00 +#define ASUS_MINI_LED_ON 0x01 +/* New mode on some devices, define here to clarify remapping later */ +#define ASUS_MINI_LED_STRONG_MODE 0x02 +/* New modes for devices with 3 mini-led mode types */ +#define ASUS_MINI_LED_2024_WEAK 0x00 +#define ASUS_MINI_LED_2024_STRONG 0x01 +#define ASUS_MINI_LED_2024_OFF 0x02 + /* Controls the power state of the USB0 hub on ROG Ally which input is on */ #define ASUS_USB0_PWR_EC0_CSEE "\\_SB.PCI0.SBRG.EC0.CSEE" /* 300ms so far seems to produce a reliable result on AC and battery */ -#define ASUS_USB0_PWR_EC0_CSEE_WAIT 300 +#define ASUS_USB0_PWR_EC0_CSEE_WAIT 1500 static const char * const ashs_ids[] = { "ATK4001", "ATK4002", NULL }; @@ -243,6 +254,9 @@ struct asus_wmi { u32 tablet_switch_dev_id; bool tablet_switch_inverted; + /* The ROG Ally device requires the MCU USB device be disconnected before suspend */ + bool ally_mcu_usb_switch; + enum fan_type fan_type; enum fan_type gpu_fan_type; enum fan_type mid_fan_type; @@ -255,22 +269,20 @@ struct asus_wmi { u8 fan_boost_mode_mask; u8 fan_boost_mode; - bool charge_mode_available; bool egpu_enable_available; - bool egpu_connect_available; bool dgpu_disable_available; - bool gpu_mux_mode_available; + u32 gpu_mux_dev; /* Tunables provided by ASUS for gaming laptops */ - bool ppt_pl2_sppt_available; - bool ppt_pl1_spl_available; - bool ppt_apu_sppt_available; - bool ppt_plat_sppt_available; - bool ppt_fppt_available; - bool nv_dyn_boost_available; - bool nv_temp_tgt_available; - - bool kbd_rgb_mode_available; + u32 ppt_pl2_sppt; + u32 ppt_pl1_spl; + u32 ppt_apu_sppt; + u32 ppt_platform_sppt; + u32 ppt_fppt; + u32 nv_dynamic_boost; + u32 nv_temp_target; + + u32 kbd_rgb_dev; bool kbd_rgb_state_available; bool throttle_thermal_policy_available; @@ -288,7 +300,7 @@ struct asus_wmi { bool battery_rsoc_available; bool panel_overdrive_available; - bool mini_led_mode_available; + u32 mini_led_dev_id; struct hotplug_slot hotplug_slot; struct mutex hotplug_lock; @@ -298,9 +310,6 @@ struct asus_wmi { bool fnlock_locked; - /* The ROG Ally device requires the MCU USB device be disconnected before suspend */ - bool ally_mcu_usb_switch; - struct asus_wmi_debug debug; struct asus_wmi_driver *driver; @@ -682,8 +691,8 @@ static ssize_t dgpu_disable_store(struct device *dev, if (disable > 1) return -EINVAL; - if (asus->gpu_mux_mode_available) { - result = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_GPU_MUX); + if (asus->gpu_mux_dev) { + result = asus_wmi_get_devstate_simple(asus, asus->gpu_mux_dev); if (result < 0) /* An error here may signal greater failure of GPU handling */ return result; @@ -748,8 +757,8 @@ static ssize_t egpu_enable_store(struct device *dev, return err; } - if (asus->gpu_mux_mode_available) { - result = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_GPU_MUX); + if (asus->gpu_mux_dev) { + result = asus_wmi_get_devstate_simple(asus, asus->gpu_mux_dev); if (result < 0) { /* An error here may signal greater failure of GPU handling */ pr_warn("Failed to get gpu mux status: %d\n", result); @@ -802,7 +811,7 @@ static ssize_t gpu_mux_mode_show(struct device *dev, struct asus_wmi *asus = dev_get_drvdata(dev); int result; - result = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_GPU_MUX); + result = asus_wmi_get_devstate_simple(asus, asus->gpu_mux_dev); if (result < 0) return result; @@ -848,7 +857,7 @@ static ssize_t gpu_mux_mode_store(struct device *dev, } } - err = asus_wmi_set_devstate(ASUS_WMI_DEVID_GPU_MUX, optimus, &result); + err = asus_wmi_set_devstate(asus->gpu_mux_dev, optimus, &result); if (err) { dev_err(dev, "Failed to set GPU MUX mode: %d\n", err); return err; @@ -871,8 +880,13 @@ static ssize_t kbd_rgb_mode_store(struct device *dev, const char *buf, size_t count) { u32 cmd, mode, r, g, b, speed; + struct led_classdev *led; + struct asus_wmi *asus; int err; + led = dev_get_drvdata(dev); + asus = container_of(led, struct asus_wmi, kbd_led); + if (sscanf(buf, "%d %d %d %d %d %d", &cmd, &mode, &r, &g, &b, &speed) != 6) return -EINVAL; @@ -906,7 +920,7 @@ static ssize_t kbd_rgb_mode_store(struct device *dev, speed = 0xeb; } - err = asus_wmi_evaluate_method3(ASUS_WMI_METHODID_DEVS, ASUS_WMI_DEVID_TUF_RGB_MODE, + err = asus_wmi_evaluate_method3(ASUS_WMI_METHODID_DEVS, asus->kbd_rgb_dev, cmd | (mode << 8) | (r << 16) | (g << 24), b | (speed << 8), NULL); if (err) return err; @@ -915,17 +929,12 @@ static ssize_t kbd_rgb_mode_store(struct device *dev, } static DEVICE_ATTR_WO(kbd_rgb_mode); -static ssize_t kbd_rgb_mode_index_show(struct device *device, - struct device_attribute *attr, - char *buf) -{ - return sysfs_emit(buf, "%s\n", "cmd mode red green blue speed"); -} -static DEVICE_ATTR_RO(kbd_rgb_mode_index); +static DEVICE_STRING_ATTR_RO(kbd_rgb_mode_index, 0444, + "cmd mode red green blue speed"); static struct attribute *kbd_rgb_mode_attrs[] = { &dev_attr_kbd_rgb_mode.attr, - &dev_attr_kbd_rgb_mode_index.attr, + &dev_attr_kbd_rgb_mode_index.attr.attr, NULL, }; @@ -967,17 +976,12 @@ static ssize_t kbd_rgb_state_store(struct device *dev, } static DEVICE_ATTR_WO(kbd_rgb_state); -static ssize_t kbd_rgb_state_index_show(struct device *device, - struct device_attribute *attr, - char *buf) -{ - return sysfs_emit(buf, "%s\n", "cmd boot awake sleep keyboard"); -} -static DEVICE_ATTR_RO(kbd_rgb_state_index); +static DEVICE_STRING_ATTR_RO(kbd_rgb_state_index, 0444, + "cmd boot awake sleep keyboard"); static struct attribute *kbd_rgb_state_attrs[] = { &dev_attr_kbd_rgb_state.attr, - &dev_attr_kbd_rgb_state_index.attr, + &dev_attr_kbd_rgb_state_index.attr.attr, NULL, }; @@ -996,11 +1000,10 @@ static ssize_t ppt_pl2_sppt_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { + struct asus_wmi *asus = dev_get_drvdata(dev); int result, err; u32 value; - struct asus_wmi *asus = dev_get_drvdata(dev); - result = kstrtou32(buf, 10, &value); if (result) return result; @@ -1019,22 +1022,31 @@ static ssize_t ppt_pl2_sppt_store(struct device *dev, return -EIO; } + asus->ppt_pl2_sppt = value; sysfs_notify(&asus->platform_device->dev.kobj, NULL, "ppt_pl2_sppt"); return count; } -static DEVICE_ATTR_WO(ppt_pl2_sppt); + +static ssize_t ppt_pl2_sppt_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct asus_wmi *asus = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%u\n", asus->ppt_pl2_sppt); +} +static DEVICE_ATTR_RW(ppt_pl2_sppt); /* Tunable: PPT, Intel=PL1, AMD=SPL ******************************************/ static ssize_t ppt_pl1_spl_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { + struct asus_wmi *asus = dev_get_drvdata(dev); int result, err; u32 value; - struct asus_wmi *asus = dev_get_drvdata(dev); - result = kstrtou32(buf, 10, &value); if (result) return result; @@ -1053,22 +1065,30 @@ static ssize_t ppt_pl1_spl_store(struct device *dev, return -EIO; } + asus->ppt_pl1_spl = value; sysfs_notify(&asus->platform_device->dev.kobj, NULL, "ppt_pl1_spl"); return count; } -static DEVICE_ATTR_WO(ppt_pl1_spl); +static ssize_t ppt_pl1_spl_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct asus_wmi *asus = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%u\n", asus->ppt_pl1_spl); +} +static DEVICE_ATTR_RW(ppt_pl1_spl); /* Tunable: PPT APU FPPT ******************************************************/ static ssize_t ppt_fppt_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { + struct asus_wmi *asus = dev_get_drvdata(dev); int result, err; u32 value; - struct asus_wmi *asus = dev_get_drvdata(dev); - result = kstrtou32(buf, 10, &value); if (result) return result; @@ -1087,22 +1107,31 @@ static ssize_t ppt_fppt_store(struct device *dev, return -EIO; } + asus->ppt_fppt = value; sysfs_notify(&asus->platform_device->dev.kobj, NULL, "ppt_fpu_sppt"); return count; } -static DEVICE_ATTR_WO(ppt_fppt); + +static ssize_t ppt_fppt_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct asus_wmi *asus = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%u\n", asus->ppt_fppt); +} +static DEVICE_ATTR_RW(ppt_fppt); /* Tunable: PPT APU SPPT *****************************************************/ static ssize_t ppt_apu_sppt_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { + struct asus_wmi *asus = dev_get_drvdata(dev); int result, err; u32 value; - struct asus_wmi *asus = dev_get_drvdata(dev); - result = kstrtou32(buf, 10, &value); if (result) return result; @@ -1121,22 +1150,31 @@ static ssize_t ppt_apu_sppt_store(struct device *dev, return -EIO; } + asus->ppt_apu_sppt = value; sysfs_notify(&asus->platform_device->dev.kobj, NULL, "ppt_apu_sppt"); return count; } -static DEVICE_ATTR_WO(ppt_apu_sppt); + +static ssize_t ppt_apu_sppt_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct asus_wmi *asus = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%u\n", asus->ppt_apu_sppt); +} +static DEVICE_ATTR_RW(ppt_apu_sppt); /* Tunable: PPT platform SPPT ************************************************/ static ssize_t ppt_platform_sppt_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { + struct asus_wmi *asus = dev_get_drvdata(dev); int result, err; u32 value; - struct asus_wmi *asus = dev_get_drvdata(dev); - result = kstrtou32(buf, 10, &value); if (result) return result; @@ -1155,22 +1193,31 @@ static ssize_t ppt_platform_sppt_store(struct device *dev, return -EIO; } + asus->ppt_platform_sppt = value; sysfs_notify(&asus->platform_device->dev.kobj, NULL, "ppt_platform_sppt"); return count; } -static DEVICE_ATTR_WO(ppt_platform_sppt); + +static ssize_t ppt_platform_sppt_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct asus_wmi *asus = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%u\n", asus->ppt_platform_sppt); +} +static DEVICE_ATTR_RW(ppt_platform_sppt); /* Tunable: NVIDIA dynamic boost *********************************************/ static ssize_t nv_dynamic_boost_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { + struct asus_wmi *asus = dev_get_drvdata(dev); int result, err; u32 value; - struct asus_wmi *asus = dev_get_drvdata(dev); - result = kstrtou32(buf, 10, &value); if (result) return result; @@ -1189,22 +1236,31 @@ static ssize_t nv_dynamic_boost_store(struct device *dev, return -EIO; } + asus->nv_dynamic_boost = value; sysfs_notify(&asus->platform_device->dev.kobj, NULL, "nv_dynamic_boost"); return count; } -static DEVICE_ATTR_WO(nv_dynamic_boost); + +static ssize_t nv_dynamic_boost_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct asus_wmi *asus = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%u\n", asus->nv_dynamic_boost); +} +static DEVICE_ATTR_RW(nv_dynamic_boost); /* Tunable: NVIDIA temperature target ****************************************/ static ssize_t nv_temp_target_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { + struct asus_wmi *asus = dev_get_drvdata(dev); int result, err; u32 value; - struct asus_wmi *asus = dev_get_drvdata(dev); - result = kstrtou32(buf, 10, &value); if (result) return result; @@ -1223,11 +1279,68 @@ static ssize_t nv_temp_target_store(struct device *dev, return -EIO; } + asus->nv_temp_target = value; sysfs_notify(&asus->platform_device->dev.kobj, NULL, "nv_temp_target"); return count; } -static DEVICE_ATTR_WO(nv_temp_target); + +static ssize_t nv_temp_target_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct asus_wmi *asus = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%u\n", asus->nv_temp_target); +} +static DEVICE_ATTR_RW(nv_temp_target); + +/* Ally MCU Powersave ********************************************************/ +static ssize_t mcu_powersave_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct asus_wmi *asus = dev_get_drvdata(dev); + int result; + + result = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_MCU_POWERSAVE); + if (result < 0) + return result; + + return sysfs_emit(buf, "%d\n", result); +} + +static ssize_t mcu_powersave_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int result, err; + u32 enable; + + struct asus_wmi *asus = dev_get_drvdata(dev); + + result = kstrtou32(buf, 10, &enable); + if (result) + return result; + + if (enable > 1) + return -EINVAL; + + err = asus_wmi_set_devstate(ASUS_WMI_DEVID_MCU_POWERSAVE, enable, &result); + if (err) { + pr_warn("Failed to set MCU powersave: %d\n", err); + return err; + } + + if (result > 1) { + pr_warn("Failed to set MCU powersave (result): 0x%x\n", result); + return -EIO; + } + + sysfs_notify(&asus->platform_device->dev.kobj, NULL, "mcu_powersave"); + + return count; +} +static DEVICE_ATTR_RW(mcu_powersave); /* Battery ********************************************************************/ @@ -1549,7 +1662,7 @@ static int asus_wmi_led_init(struct asus_wmi *asus) { int rv = 0, num_rgb_groups = 0, led_val; - if (asus->kbd_rgb_mode_available) + if (asus->kbd_rgb_dev) kbd_rgb_mode_groups[num_rgb_groups++] = &kbd_rgb_mode_group; if (asus->kbd_rgb_state_available) kbd_rgb_mode_groups[num_rgb_groups++] = &kbd_rgb_state_group; @@ -2103,20 +2216,88 @@ static ssize_t panel_od_store(struct device *dev, } static DEVICE_ATTR_RW(panel_od); -/* Mini-LED mode **************************************************************/ -static ssize_t mini_led_mode_show(struct device *dev, - struct device_attribute *attr, char *buf) +/* Bootup sound ***************************************************************/ + +static ssize_t boot_sound_show(struct device *dev, + struct device_attribute *attr, char *buf) { struct asus_wmi *asus = dev_get_drvdata(dev); int result; - result = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_MINI_LED_MODE); + result = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_BOOT_SOUND); if (result < 0) return result; return sysfs_emit(buf, "%d\n", result); } +static ssize_t boot_sound_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int result, err; + u32 snd; + + struct asus_wmi *asus = dev_get_drvdata(dev); + + result = kstrtou32(buf, 10, &snd); + if (result) + return result; + + if (snd > 1) + return -EINVAL; + + err = asus_wmi_set_devstate(ASUS_WMI_DEVID_BOOT_SOUND, snd, &result); + if (err) { + pr_warn("Failed to set boot sound: %d\n", err); + return err; + } + + if (result > 1) { + pr_warn("Failed to set panel boot sound (result): 0x%x\n", result); + return -EIO; + } + + sysfs_notify(&asus->platform_device->dev.kobj, NULL, "boot_sound"); + + return count; +} +static DEVICE_ATTR_RW(boot_sound); + +/* Mini-LED mode **************************************************************/ +static ssize_t mini_led_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct asus_wmi *asus = dev_get_drvdata(dev); + u32 value; + int err; + + err = asus_wmi_get_devstate(asus, asus->mini_led_dev_id, &value); + if (err < 0) + return err; + value = value & ASUS_MINI_LED_MODE_MASK; + + /* + * Remap the mode values to match previous generation mini-led. The last gen + * WMI 0 == off, while on this version WMI 2 ==off (flipped). + */ + if (asus->mini_led_dev_id == ASUS_WMI_DEVID_MINI_LED_MODE2) { + switch (value) { + case ASUS_MINI_LED_2024_WEAK: + value = ASUS_MINI_LED_ON; + break; + case ASUS_MINI_LED_2024_STRONG: + value = ASUS_MINI_LED_STRONG_MODE; + break; + case ASUS_MINI_LED_2024_OFF: + value = ASUS_MINI_LED_OFF; + break; + } + } + + return sysfs_emit(buf, "%d\n", value); +} + static ssize_t mini_led_mode_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -2130,11 +2311,32 @@ static ssize_t mini_led_mode_store(struct device *dev, if (result) return result; - if (mode > 1) + if (asus->mini_led_dev_id == ASUS_WMI_DEVID_MINI_LED_MODE && + mode > ASUS_MINI_LED_ON) + return -EINVAL; + if (asus->mini_led_dev_id == ASUS_WMI_DEVID_MINI_LED_MODE2 && + mode > ASUS_MINI_LED_STRONG_MODE) return -EINVAL; - err = asus_wmi_set_devstate(ASUS_WMI_DEVID_MINI_LED_MODE, mode, &result); + /* + * Remap the mode values so expected behaviour is the same as the last + * generation of mini-LED with 0 == off, 1 == on. + */ + if (asus->mini_led_dev_id == ASUS_WMI_DEVID_MINI_LED_MODE2) { + switch (mode) { + case ASUS_MINI_LED_OFF: + mode = ASUS_MINI_LED_2024_OFF; + break; + case ASUS_MINI_LED_ON: + mode = ASUS_MINI_LED_2024_WEAK; + break; + case ASUS_MINI_LED_STRONG_MODE: + mode = ASUS_MINI_LED_2024_STRONG; + break; + } + } + err = asus_wmi_set_devstate(asus->mini_led_dev_id, mode, &result); if (err) { pr_warn("Failed to set mini-LED: %d\n", err); return err; @@ -2151,6 +2353,23 @@ static ssize_t mini_led_mode_store(struct device *dev, } static DEVICE_ATTR_RW(mini_led_mode); +static ssize_t available_mini_led_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct asus_wmi *asus = dev_get_drvdata(dev); + + switch (asus->mini_led_dev_id) { + case ASUS_WMI_DEVID_MINI_LED_MODE: + return sysfs_emit(buf, "0 1\n"); + case ASUS_WMI_DEVID_MINI_LED_MODE2: + return sysfs_emit(buf, "0 1 2\n"); + } + + return sysfs_emit(buf, "0\n"); +} + +static DEVICE_ATTR_RO(available_mini_led_mode); + /* Quirks *********************************************************************/ static void asus_wmi_set_xusb2pr(struct asus_wmi *asus) @@ -2326,7 +2545,7 @@ static ssize_t pwm1_show(struct device *dev, /* If we already set a value then just return it */ if (asus->agfn_pwm >= 0) - return sprintf(buf, "%d\n", asus->agfn_pwm); + return sysfs_emit(buf, "%d\n", asus->agfn_pwm); /* * If we haven't set already set a value through the AGFN interface, @@ -2493,13 +2712,6 @@ static ssize_t pwm1_enable_store(struct device *dev, return count; } -static ssize_t fan1_label_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - return sysfs_emit(buf, "%s\n", ASUS_FAN_DESC); -} - static ssize_t asus_hwmon_temp1(struct device *dev, struct device_attribute *attr, char *buf) @@ -2512,8 +2724,8 @@ static ssize_t asus_hwmon_temp1(struct device *dev, if (err < 0) return err; - return sprintf(buf, "%ld\n", - deci_kelvin_to_millicelsius(value & 0xFFFF)); + return sysfs_emit(buf, "%ld\n", + deci_kelvin_to_millicelsius(value & 0xFFFF)); } /* GPU fan on modern ROG laptops */ @@ -2534,13 +2746,6 @@ static ssize_t fan2_input_show(struct device *dev, return sysfs_emit(buf, "%d\n", value * 100); } -static ssize_t fan2_label_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - return sysfs_emit(buf, "%s\n", ASUS_GPU_FAN_DESC); -} - /* Middle/Center fan on modern ROG laptops */ static ssize_t fan3_input_show(struct device *dev, struct device_attribute *attr, @@ -2559,13 +2764,6 @@ static ssize_t fan3_input_show(struct device *dev, return sysfs_emit(buf, "%d\n", value * 100); } -static ssize_t fan3_label_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - return sysfs_emit(buf, "%s\n", ASUS_MID_FAN_DESC); -} - static ssize_t pwm2_enable_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -2662,15 +2860,16 @@ static ssize_t pwm3_enable_store(struct device *dev, static DEVICE_ATTR_RW(pwm1); static DEVICE_ATTR_RW(pwm1_enable); static DEVICE_ATTR_RO(fan1_input); -static DEVICE_ATTR_RO(fan1_label); +static DEVICE_STRING_ATTR_RO(fan1_label, 0444, ASUS_FAN_DESC); + /* Fan2 - GPU fan */ static DEVICE_ATTR_RW(pwm2_enable); static DEVICE_ATTR_RO(fan2_input); -static DEVICE_ATTR_RO(fan2_label); +static DEVICE_STRING_ATTR_RO(fan2_label, 0444, ASUS_GPU_FAN_DESC); /* Fan3 - Middle/center fan */ static DEVICE_ATTR_RW(pwm3_enable); static DEVICE_ATTR_RO(fan3_input); -static DEVICE_ATTR_RO(fan3_label); +static DEVICE_STRING_ATTR_RO(fan3_label, 0444, ASUS_MID_FAN_DESC); /* Temperature */ static DEVICE_ATTR(temp1_input, S_IRUGO, asus_hwmon_temp1, NULL); @@ -2681,11 +2880,11 @@ static struct attribute *hwmon_attributes[] = { &dev_attr_pwm2_enable.attr, &dev_attr_pwm3_enable.attr, &dev_attr_fan1_input.attr, - &dev_attr_fan1_label.attr, + &dev_attr_fan1_label.attr.attr, &dev_attr_fan2_input.attr, - &dev_attr_fan2_label.attr, + &dev_attr_fan2_label.attr.attr, &dev_attr_fan3_input.attr, - &dev_attr_fan3_label.attr, + &dev_attr_fan3_label.attr.attr, &dev_attr_temp1_input.attr, NULL @@ -2702,17 +2901,17 @@ static umode_t asus_hwmon_sysfs_is_visible(struct kobject *kobj, if (asus->fan_type != FAN_TYPE_AGFN) return 0; } else if (attr == &dev_attr_fan1_input.attr - || attr == &dev_attr_fan1_label.attr + || attr == &dev_attr_fan1_label.attr.attr || attr == &dev_attr_pwm1_enable.attr) { if (asus->fan_type == FAN_TYPE_NONE) return 0; } else if (attr == &dev_attr_fan2_input.attr - || attr == &dev_attr_fan2_label.attr + || attr == &dev_attr_fan2_label.attr.attr || attr == &dev_attr_pwm2_enable.attr) { if (asus->gpu_fan_type == FAN_TYPE_NONE) return 0; } else if (attr == &dev_attr_fan3_input.attr - || attr == &dev_attr_fan3_label.attr + || attr == &dev_attr_fan3_label.attr.attr || attr == &dev_attr_pwm3_enable.attr) { if (asus->mid_fan_type == FAN_TYPE_NONE) return 0; @@ -4061,7 +4260,7 @@ static ssize_t show_sys_wmi(struct asus_wmi *asus, int devid, char *buf) if (value < 0) return value; - return sprintf(buf, "%d\n", value); + return sysfs_emit(buf, "%d\n", value); } #define ASUS_WMI_CREATE_DEVICE_ATTR(_name, _mode, _cm) \ @@ -4137,8 +4336,11 @@ static struct attribute *platform_attributes[] = { &dev_attr_ppt_platform_sppt.attr, &dev_attr_nv_dynamic_boost.attr, &dev_attr_nv_temp_target.attr, + &dev_attr_mcu_powersave.attr, + &dev_attr_boot_sound.attr, &dev_attr_panel_od.attr, &dev_attr_mini_led_mode.attr, + &dev_attr_available_mini_led_mode.attr, NULL }; @@ -4161,37 +4363,43 @@ static umode_t asus_sysfs_is_visible(struct kobject *kobj, else if (attr == &dev_attr_als_enable.attr) devid = ASUS_WMI_DEVID_ALS_ENABLE; else if (attr == &dev_attr_charge_mode.attr) - ok = asus->charge_mode_available; + devid = ASUS_WMI_DEVID_CHARGE_MODE; else if (attr == &dev_attr_egpu_enable.attr) ok = asus->egpu_enable_available; else if (attr == &dev_attr_egpu_connected.attr) - ok = asus->egpu_connect_available; + devid = ASUS_WMI_DEVID_EGPU_CONNECTED; else if (attr == &dev_attr_dgpu_disable.attr) ok = asus->dgpu_disable_available; else if (attr == &dev_attr_gpu_mux_mode.attr) - ok = asus->gpu_mux_mode_available; + ok = asus->gpu_mux_dev != 0; else if (attr == &dev_attr_fan_boost_mode.attr) ok = asus->fan_boost_mode_available; else if (attr == &dev_attr_throttle_thermal_policy.attr) ok = asus->throttle_thermal_policy_available; else if (attr == &dev_attr_ppt_pl2_sppt.attr) - ok = asus->ppt_pl2_sppt_available; + devid = ASUS_WMI_DEVID_PPT_PL2_SPPT; else if (attr == &dev_attr_ppt_pl1_spl.attr) - ok = asus->ppt_pl1_spl_available; + devid = ASUS_WMI_DEVID_PPT_PL1_SPL; else if (attr == &dev_attr_ppt_fppt.attr) - ok = asus->ppt_fppt_available; + devid = ASUS_WMI_DEVID_PPT_FPPT; else if (attr == &dev_attr_ppt_apu_sppt.attr) - ok = asus->ppt_apu_sppt_available; + devid = ASUS_WMI_DEVID_PPT_APU_SPPT; else if (attr == &dev_attr_ppt_platform_sppt.attr) - ok = asus->ppt_plat_sppt_available; + devid = ASUS_WMI_DEVID_PPT_PLAT_SPPT; else if (attr == &dev_attr_nv_dynamic_boost.attr) - ok = asus->nv_dyn_boost_available; + devid = ASUS_WMI_DEVID_NV_DYN_BOOST; else if (attr == &dev_attr_nv_temp_target.attr) - ok = asus->nv_temp_tgt_available; + devid = ASUS_WMI_DEVID_NV_THERM_TARGET; + else if (attr == &dev_attr_mcu_powersave.attr) + devid = ASUS_WMI_DEVID_MCU_POWERSAVE; + else if (attr == &dev_attr_boot_sound.attr) + devid = ASUS_WMI_DEVID_BOOT_SOUND; else if (attr == &dev_attr_panel_od.attr) - ok = asus->panel_overdrive_available; + devid = ASUS_WMI_DEVID_PANEL_OD; else if (attr == &dev_attr_mini_led_mode.attr) - ok = asus->mini_led_mode_available; + ok = asus->mini_led_dev_id != 0; + else if (attr == &dev_attr_available_mini_led_mode.attr) + ok = asus->mini_led_dev_id != 0; if (devid != -1) ok = !(asus_wmi_get_devstate_simple(asus, devid) < 0); @@ -4429,25 +4637,36 @@ static int asus_wmi_add(struct platform_device *pdev) if (err) goto fail_platform; - asus->charge_mode_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_CHARGE_MODE); + /* ensure defaults for tunables */ + asus->ppt_pl2_sppt = 5; + asus->ppt_pl1_spl = 5; + asus->ppt_apu_sppt = 5; + asus->ppt_platform_sppt = 5; + asus->ppt_fppt = 5; + asus->nv_dynamic_boost = 5; + asus->nv_temp_target = 75; + asus->egpu_enable_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_EGPU); - asus->egpu_connect_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_EGPU_CONNECTED); asus->dgpu_disable_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_DGPU); - asus->gpu_mux_mode_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_GPU_MUX); - asus->kbd_rgb_mode_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_TUF_RGB_MODE); asus->kbd_rgb_state_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_TUF_RGB_STATE); - asus->ppt_pl2_sppt_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_PPT_PL2_SPPT); - asus->ppt_pl1_spl_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_PPT_PL1_SPL); - asus->ppt_fppt_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_PPT_FPPT); - asus->ppt_apu_sppt_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_PPT_APU_SPPT); - asus->ppt_plat_sppt_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_PPT_PLAT_SPPT); - asus->nv_dyn_boost_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_NV_DYN_BOOST); - asus->nv_temp_tgt_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_NV_THERM_TARGET); - asus->panel_overdrive_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_PANEL_OD); - asus->mini_led_mode_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_MINI_LED_MODE); asus->ally_mcu_usb_switch = acpi_has_method(NULL, ASUS_USB0_PWR_EC0_CSEE) && dmi_match(DMI_BOARD_NAME, "RC71L"); + if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_MINI_LED_MODE)) + asus->mini_led_dev_id = ASUS_WMI_DEVID_MINI_LED_MODE; + else if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_MINI_LED_MODE2)) + asus->mini_led_dev_id = ASUS_WMI_DEVID_MINI_LED_MODE2; + + if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_GPU_MUX)) + asus->gpu_mux_dev = ASUS_WMI_DEVID_GPU_MUX; + else if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_GPU_MUX_VIVO)) + asus->gpu_mux_dev = ASUS_WMI_DEVID_GPU_MUX_VIVO; + + if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_TUF_RGB_MODE)) + asus->kbd_rgb_dev = ASUS_WMI_DEVID_TUF_RGB_MODE; + else if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_TUF_RGB_MODE2)) + asus->kbd_rgb_dev = ASUS_WMI_DEVID_TUF_RGB_MODE2; + err = fan_boost_mode_check_present(asus); if (err) goto fail_fan_boost_mode; @@ -4629,6 +4848,7 @@ static int asus_hotk_resume_early(struct device *device) struct asus_wmi *asus = dev_get_drvdata(device); if (asus->ally_mcu_usb_switch) { + /* sleep required to prevent USB0 being yanked then reappearing rapidly */ if (ACPI_FAILURE(acpi_execute_simple_method(NULL, ASUS_USB0_PWR_EC0_CSEE, 0xB8))) dev_err(device, "ROG Ally MCU failed to connect USB dev\n"); else @@ -4640,17 +4860,8 @@ static int asus_hotk_resume_early(struct device *device) static int asus_hotk_prepare(struct device *device) { struct asus_wmi *asus = dev_get_drvdata(device); - int result, err; if (asus->ally_mcu_usb_switch) { - /* When powersave is enabled it causes many issues with resume of USB hub */ - result = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_MCU_POWERSAVE); - if (result == 1) { - dev_warn(device, "MCU powersave enabled, disabling to prevent resume issues"); - err = asus_wmi_set_devstate(ASUS_WMI_DEVID_MCU_POWERSAVE, 0, &result); - if (err || result != 1) - dev_err(device, "Failed to set MCU powersave mode: %d\n", err); - } /* sleep required to ensure USB0 is disabled before sleep continues */ if (ACPI_FAILURE(acpi_execute_simple_method(NULL, ASUS_USB0_PWR_EC0_CSEE, 0xB7))) dev_err(device, "ROG Ally MCU failed to disconnect USB dev\n"); diff --git a/drivers/platform/x86/classmate-laptop.c b/drivers/platform/x86/classmate-laptop.c index 2edaea2492..cb6fce655e 100644 --- a/drivers/platform/x86/classmate-laptop.c +++ b/drivers/platform/x86/classmate-laptop.c @@ -13,8 +13,6 @@ #include <linux/input.h> #include <linux/rfkill.h> -MODULE_LICENSE("GPL"); - struct cmpc_accel { int sensitivity; int g_select; @@ -434,7 +432,6 @@ static const struct acpi_device_id cmpc_accel_device_ids_v4[] = { }; static struct acpi_driver cmpc_accel_acpi_driver_v4 = { - .owner = THIS_MODULE, .name = "cmpc_accel_v4", .class = "cmpc_accel_v4", .ids = cmpc_accel_device_ids_v4, @@ -660,7 +657,6 @@ static const struct acpi_device_id cmpc_accel_device_ids[] = { }; static struct acpi_driver cmpc_accel_acpi_driver = { - .owner = THIS_MODULE, .name = "cmpc_accel", .class = "cmpc_accel", .ids = cmpc_accel_device_ids, @@ -754,7 +750,6 @@ static const struct acpi_device_id cmpc_tablet_device_ids[] = { }; static struct acpi_driver cmpc_tablet_acpi_driver = { - .owner = THIS_MODULE, .name = "cmpc_tablet", .class = "cmpc_tablet", .ids = cmpc_tablet_device_ids, @@ -996,7 +991,6 @@ static const struct acpi_device_id cmpc_ipml_device_ids[] = { }; static struct acpi_driver cmpc_ipml_acpi_driver = { - .owner = THIS_MODULE, .name = "cmpc", .class = "cmpc", .ids = cmpc_ipml_device_ids, @@ -1064,7 +1058,6 @@ static const struct acpi_device_id cmpc_keys_device_ids[] = { }; static struct acpi_driver cmpc_keys_acpi_driver = { - .owner = THIS_MODULE, .name = "cmpc_keys", .class = "cmpc_keys", .ids = cmpc_keys_device_ids, @@ -1144,3 +1137,5 @@ static const struct acpi_device_id cmpc_device_ids[] __maybe_unused = { }; MODULE_DEVICE_TABLE(acpi, cmpc_device_ids); +MODULE_DESCRIPTION("Support for Intel Classmate PC ACPI devices"); +MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/dell/Kconfig b/drivers/platform/x86/dell/Kconfig index bd9f445974..195a8bf532 100644 --- a/drivers/platform/x86/dell/Kconfig +++ b/drivers/platform/x86/dell/Kconfig @@ -145,6 +145,21 @@ config DELL_SMO8800 To compile this driver as a module, choose M here: the module will be called dell-smo8800. +config DELL_UART_BACKLIGHT + tristate "Dell AIO UART Backlight driver" + depends on ACPI + depends on BACKLIGHT_CLASS_DEVICE + depends on SERIAL_DEV_BUS + help + Say Y here if you want to support Dell AIO UART backlight interface. + The Dell AIO machines released after 2017 come with a UART interface + to communicate with the backlight scalar board. This driver creates + a standard backlight interface and talks to the scalar board through + UART to adjust the AIO screen brightness. + + To compile this driver as a module, choose M here: the module will + be called dell_uart_backlight. + config DELL_WMI tristate "Dell WMI notifications" default m diff --git a/drivers/platform/x86/dell/Makefile b/drivers/platform/x86/dell/Makefile index 1b89424266..8176a257d9 100644 --- a/drivers/platform/x86/dell/Makefile +++ b/drivers/platform/x86/dell/Makefile @@ -14,6 +14,7 @@ dell-smbios-objs := dell-smbios-base.o dell-smbios-$(CONFIG_DELL_SMBIOS_WMI) += dell-smbios-wmi.o dell-smbios-$(CONFIG_DELL_SMBIOS_SMM) += dell-smbios-smm.o obj-$(CONFIG_DELL_SMO8800) += dell-smo8800.o +obj-$(CONFIG_DELL_UART_BACKLIGHT) += dell-uart-backlight.o obj-$(CONFIG_DELL_WMI) += dell-wmi.o dell-wmi-objs := dell-wmi-base.o dell-wmi-$(CONFIG_DELL_WMI_PRIVACY) += dell-wmi-privacy.o diff --git a/drivers/platform/x86/dell/dell-rbtn.c b/drivers/platform/x86/dell/dell-rbtn.c index c8fcb537fd..a415c432d4 100644 --- a/drivers/platform/x86/dell/dell-rbtn.c +++ b/drivers/platform/x86/dell/dell-rbtn.c @@ -295,7 +295,6 @@ static struct acpi_driver rbtn_driver = { .remove = rbtn_remove, .notify = rbtn_notify, }, - .owner = THIS_MODULE, }; diff --git a/drivers/platform/x86/dell/dell-smbios-base.c b/drivers/platform/x86/dell/dell-smbios-base.c index 86b95206cb..b562ed99ec 100644 --- a/drivers/platform/x86/dell/dell-smbios-base.c +++ b/drivers/platform/x86/dell/dell-smbios-base.c @@ -492,19 +492,16 @@ static int build_tokens_sysfs(struct platform_device *dev) /* add value */ value_name = kasprintf(GFP_KERNEL, "%04x_value", da_tokens[i].tokenID); - if (value_name == NULL) - goto loop_fail_create_value; + if (!value_name) { + kfree(location_name); + goto out_unwind_strings; + } sysfs_attr_init(&token_entries[i].value_attr.attr); token_entries[i].value_attr.attr.name = value_name; token_entries[i].value_attr.attr.mode = 0444; token_entries[i].value_attr.show = value_show; token_attrs[j++] = &token_entries[i].value_attr.attr; - continue; - -loop_fail_create_value: - kfree(location_name); - goto out_unwind_strings; } smbios_attribute_group.attrs = token_attrs; diff --git a/drivers/platform/x86/dell/dell-uart-backlight.c b/drivers/platform/x86/dell/dell-uart-backlight.c new file mode 100644 index 0000000000..87d2a20b4c --- /dev/null +++ b/drivers/platform/x86/dell/dell-uart-backlight.c @@ -0,0 +1,398 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Dell AIO Serial Backlight Driver + * + * Copyright (C) 2024 Hans de Goede <hansg@kernel.org> + * Copyright (C) 2017 AceLan Kao <acelan.kao@canonical.com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/acpi.h> +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> +#include <linux/serdev.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/wait.h> +#include "../serdev_helpers.h" + +/* The backlight controller must respond within 1 second */ +#define DELL_BL_TIMEOUT msecs_to_jiffies(1000) +#define DELL_BL_MAX_BRIGHTNESS 100 + +/* Defines for the commands send to the controller */ + +/* 1st byte Start Of Frame 3 MSB bits: cmd-len + 01010 SOF marker */ +#define DELL_SOF(len) (((len) << 5) | 0x0a) +#define GET_CMD_LEN 3 +#define SET_CMD_LEN 4 + +/* 2nd byte command */ +#define CMD_GET_VERSION 0x06 +#define CMD_SET_BRIGHTNESS 0x0b +#define CMD_GET_BRIGHTNESS 0x0c +#define CMD_SET_BL_POWER 0x0e + +/* Indexes and other defines for response received from the controller */ +#define RESP_LEN 0 +#define RESP_CMD 1 /* Echo of CMD byte from command */ +#define RESP_DATA 2 /* Start of received data */ + +#define SET_RESP_LEN 3 +#define GET_RESP_LEN 4 +#define MIN_RESP_LEN 3 +#define MAX_RESP_LEN 80 + +struct dell_uart_backlight { + struct mutex mutex; + wait_queue_head_t wait_queue; + struct device *dev; + struct backlight_device *bl; + u8 *resp; + u8 resp_idx; + u8 resp_len; + u8 resp_max_len; + u8 pending_cmd; + int status; + int power; +}; + +/* Checksum: SUM(Length and Cmd and Data) xor 0xFF */ +static u8 dell_uart_checksum(u8 *buf, int len) +{ + u8 val = 0; + + while (len-- > 0) + val += buf[len]; + + return val ^ 0xff; +} + +static int dell_uart_bl_command(struct dell_uart_backlight *dell_bl, + const u8 *cmd, int cmd_len, + u8 *resp, int resp_max_len) +{ + int ret; + + ret = mutex_lock_killable(&dell_bl->mutex); + if (ret) + return ret; + + dell_bl->status = -EBUSY; + dell_bl->resp = resp; + dell_bl->resp_idx = 0; + dell_bl->resp_len = -1; /* Invalid / unset */ + dell_bl->resp_max_len = resp_max_len; + dell_bl->pending_cmd = cmd[1]; + + /* The TTY buffer should be big enough to take the entire cmd in one go */ + ret = serdev_device_write_buf(to_serdev_device(dell_bl->dev), cmd, cmd_len); + if (ret != cmd_len) { + dev_err(dell_bl->dev, "Error writing command: %d\n", ret); + dell_bl->status = (ret < 0) ? ret : -EIO; + goto out; + } + + ret = wait_event_timeout(dell_bl->wait_queue, dell_bl->status != -EBUSY, + DELL_BL_TIMEOUT); + if (ret == 0) { + dev_err(dell_bl->dev, "Timed out waiting for response.\n"); + /* Clear busy status to discard bytes received after this */ + dell_bl->status = -ETIMEDOUT; + } + +out: + mutex_unlock(&dell_bl->mutex); + return dell_bl->status; +} + +static int dell_uart_set_brightness(struct dell_uart_backlight *dell_bl, int brightness) +{ + u8 set_brightness[SET_CMD_LEN], resp[SET_RESP_LEN]; + + set_brightness[0] = DELL_SOF(SET_CMD_LEN); + set_brightness[1] = CMD_SET_BRIGHTNESS; + set_brightness[2] = brightness; + set_brightness[3] = dell_uart_checksum(set_brightness, 3); + + return dell_uart_bl_command(dell_bl, set_brightness, SET_CMD_LEN, resp, SET_RESP_LEN); +} + +static int dell_uart_get_brightness(struct dell_uart_backlight *dell_bl) +{ + struct device *dev = dell_bl->dev; + u8 get_brightness[GET_CMD_LEN], resp[GET_RESP_LEN]; + int ret; + + get_brightness[0] = DELL_SOF(GET_CMD_LEN); + get_brightness[1] = CMD_GET_BRIGHTNESS; + get_brightness[2] = dell_uart_checksum(get_brightness, 2); + + ret = dell_uart_bl_command(dell_bl, get_brightness, GET_CMD_LEN, resp, GET_RESP_LEN); + if (ret) + return ret; + + if (resp[RESP_LEN] != GET_RESP_LEN) { + dev_err(dev, "Unexpected get brightness response length: %d\n", resp[RESP_LEN]); + return -EIO; + } + + if (resp[RESP_DATA] > DELL_BL_MAX_BRIGHTNESS) { + dev_err(dev, "Unexpected get brightness response: %d\n", resp[RESP_DATA]); + return -EIO; + } + + return resp[RESP_DATA]; +} + +static int dell_uart_set_bl_power(struct dell_uart_backlight *dell_bl, int power) +{ + u8 set_power[SET_CMD_LEN], resp[SET_RESP_LEN]; + int ret; + + set_power[0] = DELL_SOF(SET_CMD_LEN); + set_power[1] = CMD_SET_BL_POWER; + set_power[2] = (power == FB_BLANK_UNBLANK) ? 1 : 0; + set_power[3] = dell_uart_checksum(set_power, 3); + + ret = dell_uart_bl_command(dell_bl, set_power, SET_CMD_LEN, resp, SET_RESP_LEN); + if (ret) + return ret; + + dell_bl->power = power; + return 0; +} + +/* + * There is no command to get backlight power status, + * so we set the backlight power to "on" while initializing, + * and then track and report its status by power variable. + */ +static int dell_uart_get_bl_power(struct dell_uart_backlight *dell_bl) +{ + return dell_bl->power; +} + +static int dell_uart_update_status(struct backlight_device *bd) +{ + struct dell_uart_backlight *dell_bl = bl_get_data(bd); + int ret; + + ret = dell_uart_set_brightness(dell_bl, bd->props.brightness); + if (ret) + return ret; + + if (bd->props.power != dell_uart_get_bl_power(dell_bl)) + return dell_uart_set_bl_power(dell_bl, bd->props.power); + + return 0; +} + +static int dell_uart_get_brightness_op(struct backlight_device *bd) +{ + return dell_uart_get_brightness(bl_get_data(bd)); +} + +static const struct backlight_ops dell_uart_backlight_ops = { + .update_status = dell_uart_update_status, + .get_brightness = dell_uart_get_brightness_op, +}; + +static size_t dell_uart_bl_receive(struct serdev_device *serdev, const u8 *data, size_t len) +{ + struct dell_uart_backlight *dell_bl = serdev_device_get_drvdata(serdev); + size_t i; + u8 csum; + + dev_dbg(dell_bl->dev, "Recv: %*ph\n", (int)len, data); + + /* Throw away unexpected bytes / remainder of response after an error */ + if (dell_bl->status != -EBUSY) { + dev_warn(dell_bl->dev, "Bytes received out of band, dropping them.\n"); + return len; + } + + i = 0; + while (i < len && dell_bl->resp_idx != dell_bl->resp_len) { + dell_bl->resp[dell_bl->resp_idx] = data[i++]; + + switch (dell_bl->resp_idx) { + case RESP_LEN: /* Length byte */ + dell_bl->resp_len = dell_bl->resp[RESP_LEN]; + if (dell_bl->resp_len < MIN_RESP_LEN || + dell_bl->resp_len > dell_bl->resp_max_len) { + dev_err(dell_bl->dev, "Response length %d out if range %d - %d\n", + dell_bl->resp_len, MIN_RESP_LEN, dell_bl->resp_max_len); + dell_bl->status = -EIO; + goto wakeup; + } + break; + case RESP_CMD: /* CMD byte */ + if (dell_bl->resp[RESP_CMD] != dell_bl->pending_cmd) { + dev_err(dell_bl->dev, "Response cmd 0x%02x != pending 0x%02x\n", + dell_bl->resp[RESP_CMD], dell_bl->pending_cmd); + dell_bl->status = -EIO; + goto wakeup; + } + break; + } + dell_bl->resp_idx++; + } + + if (dell_bl->resp_idx != dell_bl->resp_len) + return len; /* Response not complete yet */ + + csum = dell_uart_checksum(dell_bl->resp, dell_bl->resp_len - 1); + if (dell_bl->resp[dell_bl->resp_len - 1] == csum) { + dell_bl->status = 0; /* Success */ + } else { + dev_err(dell_bl->dev, "Checksum mismatch got 0x%02x expected 0x%02x\n", + dell_bl->resp[dell_bl->resp_len - 1], csum); + dell_bl->status = -EIO; + } +wakeup: + wake_up(&dell_bl->wait_queue); + return i; +} + +static const struct serdev_device_ops dell_uart_bl_serdev_ops = { + .receive_buf = dell_uart_bl_receive, + .write_wakeup = serdev_device_write_wakeup, +}; + +static int dell_uart_bl_serdev_probe(struct serdev_device *serdev) +{ + u8 get_version[GET_CMD_LEN], resp[MAX_RESP_LEN]; + struct backlight_properties props = {}; + struct dell_uart_backlight *dell_bl; + struct device *dev = &serdev->dev; + int ret; + + dell_bl = devm_kzalloc(dev, sizeof(*dell_bl), GFP_KERNEL); + if (!dell_bl) + return -ENOMEM; + + mutex_init(&dell_bl->mutex); + init_waitqueue_head(&dell_bl->wait_queue); + dell_bl->dev = dev; + + ret = devm_serdev_device_open(dev, serdev); + if (ret) + return dev_err_probe(dev, ret, "opening UART device\n"); + + /* 9600 bps, no flow control, these are the default but set them to be sure */ + serdev_device_set_baudrate(serdev, 9600); + serdev_device_set_flow_control(serdev, false); + serdev_device_set_drvdata(serdev, dell_bl); + serdev_device_set_client_ops(serdev, &dell_uart_bl_serdev_ops); + + get_version[0] = DELL_SOF(GET_CMD_LEN); + get_version[1] = CMD_GET_VERSION; + get_version[2] = dell_uart_checksum(get_version, 2); + + ret = dell_uart_bl_command(dell_bl, get_version, GET_CMD_LEN, resp, MAX_RESP_LEN); + if (ret) + return dev_err_probe(dev, ret, "getting firmware version\n"); + + dev_dbg(dev, "Firmware version: %.*s\n", resp[RESP_LEN] - 3, resp + RESP_DATA); + + /* Initialize bl_power to a known value */ + ret = dell_uart_set_bl_power(dell_bl, FB_BLANK_UNBLANK); + if (ret) + return ret; + + ret = dell_uart_get_brightness(dell_bl); + if (ret < 0) + return ret; + + props.type = BACKLIGHT_PLATFORM; + props.brightness = ret; + props.max_brightness = DELL_BL_MAX_BRIGHTNESS; + props.power = dell_bl->power; + + dell_bl->bl = devm_backlight_device_register(dev, "dell_uart_backlight", + dev, dell_bl, + &dell_uart_backlight_ops, + &props); + return PTR_ERR_OR_ZERO(dell_bl->bl); +} + +struct serdev_device_driver dell_uart_bl_serdev_driver = { + .probe = dell_uart_bl_serdev_probe, + .driver = { + .name = KBUILD_MODNAME, + }, +}; + +static int dell_uart_bl_pdev_probe(struct platform_device *pdev) +{ + struct serdev_device *serdev; + struct device *ctrl_dev; + int ret; + + ctrl_dev = get_serdev_controller("DELL0501", NULL, 0, "serial0"); + if (IS_ERR(ctrl_dev)) + return PTR_ERR(ctrl_dev); + + serdev = serdev_device_alloc(to_serdev_controller(ctrl_dev)); + put_device(ctrl_dev); + if (!serdev) + return -ENOMEM; + + ret = serdev_device_add(serdev); + if (ret) { + dev_err(&pdev->dev, "error %d adding serdev\n", ret); + serdev_device_put(serdev); + return ret; + } + + ret = serdev_device_driver_register(&dell_uart_bl_serdev_driver); + if (ret) + goto err_remove_serdev; + + /* + * serdev device <-> driver matching relies on OF or ACPI matches and + * neither is available here, manually bind the driver. + */ + ret = device_driver_attach(&dell_uart_bl_serdev_driver.driver, &serdev->dev); + if (ret) + goto err_unregister_serdev_driver; + + /* So that dell_uart_bl_pdev_remove() can remove the serdev */ + platform_set_drvdata(pdev, serdev); + return 0; + +err_unregister_serdev_driver: + serdev_device_driver_unregister(&dell_uart_bl_serdev_driver); +err_remove_serdev: + serdev_device_remove(serdev); + return ret; +} + +static void dell_uart_bl_pdev_remove(struct platform_device *pdev) +{ + struct serdev_device *serdev = platform_get_drvdata(pdev); + + serdev_device_driver_unregister(&dell_uart_bl_serdev_driver); + serdev_device_remove(serdev); +} + +static struct platform_driver dell_uart_bl_pdev_driver = { + .probe = dell_uart_bl_pdev_probe, + .remove_new = dell_uart_bl_pdev_remove, + .driver = { + .name = "dell-uart-backlight", + }, +}; +module_platform_driver(dell_uart_bl_pdev_driver); + +MODULE_ALIAS("platform:dell-uart-backlight"); +MODULE_DESCRIPTION("Dell AIO Serial Backlight driver"); +MODULE_AUTHOR("Hans de Goede <hansg@kernel.org>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index ff1b70269c..447364bed2 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -1463,7 +1463,6 @@ MODULE_DEVICE_TABLE(acpi, eeepc_device_ids); static struct acpi_driver eeepc_acpi_driver = { .name = EEEPC_LAPTOP_NAME, .class = EEEPC_ACPI_CLASS, - .owner = THIS_MODULE, .ids = eeepc_device_ids, .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS, .ops = { diff --git a/drivers/platform/x86/firmware_attributes_class.c b/drivers/platform/x86/firmware_attributes_class.c index dd82400095..182a07d8ae 100644 --- a/drivers/platform/x86/firmware_attributes_class.c +++ b/drivers/platform/x86/firmware_attributes_class.c @@ -49,4 +49,5 @@ int fw_attributes_class_put(void) EXPORT_SYMBOL_GPL(fw_attributes_class_put); MODULE_AUTHOR("Mark Pearson <markpearson@lenovo.com>"); +MODULE_DESCRIPTION("Firmware attributes class helper module"); MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c index 94480af494..968fc91bd5 100644 --- a/drivers/platform/x86/fujitsu-laptop.c +++ b/drivers/platform/x86/fujitsu-laptop.c @@ -386,11 +386,11 @@ static ssize_t lid_show(struct device *dev, struct device_attribute *attr, struct fujitsu_laptop *priv = dev_get_drvdata(dev); if (!(priv->flags_supported & FLAG_LID)) - return sprintf(buf, "unknown\n"); + return sysfs_emit(buf, "unknown\n"); if (priv->flags_state & FLAG_LID) - return sprintf(buf, "open\n"); + return sysfs_emit(buf, "open\n"); else - return sprintf(buf, "closed\n"); + return sysfs_emit(buf, "closed\n"); } static ssize_t dock_show(struct device *dev, struct device_attribute *attr, @@ -399,11 +399,11 @@ static ssize_t dock_show(struct device *dev, struct device_attribute *attr, struct fujitsu_laptop *priv = dev_get_drvdata(dev); if (!(priv->flags_supported & FLAG_DOCK)) - return sprintf(buf, "unknown\n"); + return sysfs_emit(buf, "unknown\n"); if (priv->flags_state & FLAG_DOCK) - return sprintf(buf, "docked\n"); + return sysfs_emit(buf, "docked\n"); else - return sprintf(buf, "undocked\n"); + return sysfs_emit(buf, "undocked\n"); } static ssize_t radios_show(struct device *dev, struct device_attribute *attr, @@ -412,11 +412,11 @@ static ssize_t radios_show(struct device *dev, struct device_attribute *attr, struct fujitsu_laptop *priv = dev_get_drvdata(dev); if (!(priv->flags_supported & FLAG_RFKILL)) - return sprintf(buf, "unknown\n"); + return sysfs_emit(buf, "unknown\n"); if (priv->flags_state & FLAG_RFKILL) - return sprintf(buf, "on\n"); + return sysfs_emit(buf, "on\n"); else - return sprintf(buf, "killed\n"); + return sysfs_emit(buf, "killed\n"); } static DEVICE_ATTR_RO(lid); diff --git a/drivers/platform/x86/hp/hp-wmi.c b/drivers/platform/x86/hp/hp-wmi.c index 630519c086..5fa5530238 100644 --- a/drivers/platform/x86/hp/hp-wmi.c +++ b/drivers/platform/x86/hp/hp-wmi.c @@ -681,7 +681,7 @@ static ssize_t display_show(struct device *dev, struct device_attribute *attr, if (value < 0) return value; - return sprintf(buf, "%d\n", value); + return sysfs_emit(buf, "%d\n", value); } static ssize_t hddtemp_show(struct device *dev, struct device_attribute *attr, @@ -691,7 +691,7 @@ static ssize_t hddtemp_show(struct device *dev, struct device_attribute *attr, if (value < 0) return value; - return sprintf(buf, "%d\n", value); + return sysfs_emit(buf, "%d\n", value); } static ssize_t als_show(struct device *dev, struct device_attribute *attr, @@ -701,7 +701,7 @@ static ssize_t als_show(struct device *dev, struct device_attribute *attr, if (value < 0) return value; - return sprintf(buf, "%d\n", value); + return sysfs_emit(buf, "%d\n", value); } static ssize_t dock_show(struct device *dev, struct device_attribute *attr, @@ -711,7 +711,7 @@ static ssize_t dock_show(struct device *dev, struct device_attribute *attr, if (value < 0) return value; - return sprintf(buf, "%d\n", value); + return sysfs_emit(buf, "%d\n", value); } static ssize_t tablet_show(struct device *dev, struct device_attribute *attr, @@ -721,7 +721,7 @@ static ssize_t tablet_show(struct device *dev, struct device_attribute *attr, if (value < 0) return value; - return sprintf(buf, "%d\n", value); + return sysfs_emit(buf, "%d\n", value); } static ssize_t postcode_show(struct device *dev, struct device_attribute *attr, @@ -732,7 +732,7 @@ static ssize_t postcode_show(struct device *dev, struct device_attribute *attr, if (value < 0) return value; - return sprintf(buf, "0x%x\n", value); + return sysfs_emit(buf, "0x%x\n", value); } static ssize_t als_store(struct device *dev, struct device_attribute *attr, diff --git a/drivers/platform/x86/huawei-wmi.c b/drivers/platform/x86/huawei-wmi.c index dde139c699..09d476dd83 100644 --- a/drivers/platform/x86/huawei-wmi.c +++ b/drivers/platform/x86/huawei-wmi.c @@ -379,7 +379,7 @@ static ssize_t charge_control_start_threshold_show(struct device *dev, if (err) return err; - return sprintf(buf, "%d\n", start); + return sysfs_emit(buf, "%d\n", start); } static ssize_t charge_control_end_threshold_show(struct device *dev, @@ -392,7 +392,7 @@ static ssize_t charge_control_end_threshold_show(struct device *dev, if (err) return err; - return sprintf(buf, "%d\n", end); + return sysfs_emit(buf, "%d\n", end); } static ssize_t charge_control_thresholds_show(struct device *dev, @@ -405,7 +405,7 @@ static ssize_t charge_control_thresholds_show(struct device *dev, if (err) return err; - return sprintf(buf, "%d %d\n", start, end); + return sysfs_emit(buf, "%d %d\n", start, end); } static ssize_t charge_control_start_threshold_store(struct device *dev, @@ -562,7 +562,7 @@ static ssize_t fn_lock_state_show(struct device *dev, if (err) return err; - return sprintf(buf, "%d\n", on); + return sysfs_emit(buf, "%d\n", on); } static ssize_t fn_lock_state_store(struct device *dev, diff --git a/drivers/platform/x86/ibm_rtl.c b/drivers/platform/x86/ibm_rtl.c index 1d4bbae115..231b379098 100644 --- a/drivers/platform/x86/ibm_rtl.c +++ b/drivers/platform/x86/ibm_rtl.c @@ -29,6 +29,7 @@ static bool debug; module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "Show debug output"); +MODULE_DESCRIPTION("IBM Premium Real Time Mode (PRTM) driver"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Keith Mannthey <kmmanth@us.ibm.com>"); MODULE_AUTHOR("Vernon Mauery <vernux@us.ibm.com>"); diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index 901849810c..fcf13d88fd 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -152,6 +152,11 @@ struct ideapad_private { struct led_classdev led; unsigned int last_brightness; } kbd_bl; + struct { + bool initialized; + struct led_classdev led; + unsigned int last_brightness; + } fn_lock; }; static bool no_bt_rfkill; @@ -513,11 +518,8 @@ static ssize_t fan_mode_store(struct device *dev, static DEVICE_ATTR_RW(fan_mode); -static ssize_t fn_lock_show(struct device *dev, - struct device_attribute *attr, - char *buf) +static int ideapad_fn_lock_get(struct ideapad_private *priv) { - struct ideapad_private *priv = dev_get_drvdata(dev); unsigned long hals; int err; @@ -525,7 +527,40 @@ static ssize_t fn_lock_show(struct device *dev, if (err) return err; - return sysfs_emit(buf, "%d\n", !!test_bit(HALS_FNLOCK_STATE_BIT, &hals)); + return !!test_bit(HALS_FNLOCK_STATE_BIT, &hals); +} + +static int ideapad_fn_lock_set(struct ideapad_private *priv, bool state) +{ + return exec_sals(priv->adev->handle, + state ? SALS_FNLOCK_ON : SALS_FNLOCK_OFF); +} + +static void ideapad_fn_lock_led_notify(struct ideapad_private *priv, int brightness) +{ + if (!priv->fn_lock.initialized) + return; + + if (brightness == priv->fn_lock.last_brightness) + return; + + priv->fn_lock.last_brightness = brightness; + + led_classdev_notify_brightness_hw_changed(&priv->fn_lock.led, brightness); +} + +static ssize_t fn_lock_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct ideapad_private *priv = dev_get_drvdata(dev); + int brightness; + + brightness = ideapad_fn_lock_get(priv); + if (brightness < 0) + return brightness; + + return sysfs_emit(buf, "%d\n", brightness); } static ssize_t fn_lock_store(struct device *dev, @@ -540,10 +575,12 @@ static ssize_t fn_lock_store(struct device *dev, if (err) return err; - err = exec_sals(priv->adev->handle, state ? SALS_FNLOCK_ON : SALS_FNLOCK_OFF); + err = ideapad_fn_lock_set(priv, state); if (err) return err; + ideapad_fn_lock_led_notify(priv, state); + return count; } @@ -1181,8 +1218,11 @@ static void ideapad_check_special_buttons(struct ideapad_private *priv) switch (bit) { case 6: /* Z570 */ case 0: /* Z580 */ - /* Thermal Management button */ - ideapad_input_report(priv, 65); + /* Thermal Management / Performance Mode button */ + if (priv->dytc) + platform_profile_cycle(); + else + ideapad_input_report(priv, 65); break; case 1: /* OneKey Theater button */ @@ -1463,6 +1503,65 @@ static void ideapad_kbd_bl_exit(struct ideapad_private *priv) } /* + * FnLock LED + */ +static enum led_brightness ideapad_fn_lock_led_cdev_get(struct led_classdev *led_cdev) +{ + struct ideapad_private *priv = container_of(led_cdev, struct ideapad_private, fn_lock.led); + + return ideapad_fn_lock_get(priv); +} + +static int ideapad_fn_lock_led_cdev_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct ideapad_private *priv = container_of(led_cdev, struct ideapad_private, fn_lock.led); + + return ideapad_fn_lock_set(priv, brightness); +} + +static int ideapad_fn_lock_led_init(struct ideapad_private *priv) +{ + int brightness, err; + + if (!priv->features.fn_lock) + return -ENODEV; + + if (WARN_ON(priv->fn_lock.initialized)) + return -EEXIST; + + priv->fn_lock.led.max_brightness = 1; + + brightness = ideapad_fn_lock_get(priv); + if (brightness < 0) + return brightness; + + priv->fn_lock.last_brightness = brightness; + priv->fn_lock.led.name = "platform::" LED_FUNCTION_FNLOCK; + priv->fn_lock.led.brightness_get = ideapad_fn_lock_led_cdev_get; + priv->fn_lock.led.brightness_set_blocking = ideapad_fn_lock_led_cdev_set; + priv->fn_lock.led.flags = LED_BRIGHT_HW_CHANGED; + + err = led_classdev_register(&priv->platform_device->dev, &priv->fn_lock.led); + if (err) + return err; + + priv->fn_lock.initialized = true; + + return 0; +} + +static void ideapad_fn_lock_led_exit(struct ideapad_private *priv) +{ + if (!priv->fn_lock.initialized) + return; + + priv->fn_lock.initialized = false; + + led_classdev_unregister(&priv->fn_lock.led); +} + +/* * module init/exit */ static void ideapad_sync_touchpad_state(struct ideapad_private *priv, bool send_events) @@ -1709,7 +1808,6 @@ static void ideapad_wmi_notify(struct wmi_device *wdev, union acpi_object *data) { struct ideapad_wmi_private *wpriv = dev_get_drvdata(&wdev->dev); struct ideapad_private *priv; - unsigned long result; mutex_lock(&ideapad_shared_mutex); @@ -1722,11 +1820,13 @@ static void ideapad_wmi_notify(struct wmi_device *wdev, union acpi_object *data) ideapad_input_report(priv, 128); break; case IDEAPAD_WMI_EVENT_FN_KEYS: - if (priv->features.set_fn_lock_led && - !eval_hals(priv->adev->handle, &result)) { - bool state = test_bit(HALS_FNLOCK_STATE_BIT, &result); + if (priv->features.set_fn_lock_led) { + int brightness = ideapad_fn_lock_get(priv); - exec_sals(priv->adev->handle, state ? SALS_FNLOCK_ON : SALS_FNLOCK_OFF); + if (brightness >= 0) { + ideapad_fn_lock_set(priv, brightness); + ideapad_fn_lock_led_notify(priv, brightness); + } } if (data->type != ACPI_TYPE_INTEGER) { @@ -1738,6 +1838,10 @@ static void ideapad_wmi_notify(struct wmi_device *wdev, union acpi_object *data) dev_dbg(&wdev->dev, "WMI fn-key event: 0x%llx\n", data->integer.value); + /* 0x02 FnLock, 0x03 Esc */ + if (data->integer.value == 0x02 || data->integer.value == 0x03) + ideapad_fn_lock_led_notify(priv, data->integer.value == 0x02); + ideapad_input_report(priv, data->integer.value | IDEAPAD_WMI_KEY); @@ -1831,6 +1935,14 @@ static int ideapad_acpi_add(struct platform_device *pdev) dev_info(&pdev->dev, "Keyboard backlight control not available\n"); } + err = ideapad_fn_lock_led_init(priv); + if (err) { + if (err != -ENODEV) + dev_warn(&pdev->dev, "Could not set up FnLock LED: %d\n", err); + else + dev_info(&pdev->dev, "FnLock control not available\n"); + } + /* * On some models without a hw-switch (the yoga 2 13 at least) * VPCCMD_W_RF must be explicitly set to 1 for the wifi to work. @@ -1887,6 +1999,7 @@ backlight_failed: for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++) ideapad_unregister_rfkill(priv, i); + ideapad_fn_lock_led_exit(priv); ideapad_kbd_bl_exit(priv); ideapad_input_exit(priv); @@ -1914,6 +2027,7 @@ static void ideapad_acpi_remove(struct platform_device *pdev) for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++) ideapad_unregister_rfkill(priv, i); + ideapad_fn_lock_led_exit(priv); ideapad_kbd_bl_exit(priv); ideapad_input_exit(priv); ideapad_debugfs_exit(priv); diff --git a/drivers/platform/x86/inspur_platform_profile.c b/drivers/platform/x86/inspur_platform_profile.c index 743705bddd..8440defa67 100644 --- a/drivers/platform/x86/inspur_platform_profile.c +++ b/drivers/platform/x86/inspur_platform_profile.c @@ -207,6 +207,7 @@ static struct wmi_driver inspur_wmi_driver = { .id_table = inspur_wmi_id_table, .probe = inspur_wmi_probe, .remove = inspur_wmi_remove, + .no_singleton = true, }; module_wmi_driver(inspur_wmi_driver); diff --git a/drivers/platform/x86/intel/hid.c b/drivers/platform/x86/intel/hid.c index c7a8276458..10cd65497c 100644 --- a/drivers/platform/x86/intel/hid.c +++ b/drivers/platform/x86/intel/hid.c @@ -38,6 +38,7 @@ MODULE_PARM_DESC(enable_sw_tablet_mode, /* When NOT in tablet mode, VGBS returns with the flag 0x40 */ #define TABLET_MODE_FLAG BIT(6) +MODULE_DESCRIPTION("Intel HID Event hotkey driver"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Alex Hung"); diff --git a/drivers/platform/x86/intel/ifs/load.c b/drivers/platform/x86/intel/ifs/load.c index 584c44387e..39f19cb517 100644 --- a/drivers/platform/x86/intel/ifs/load.c +++ b/drivers/platform/x86/intel/ifs/load.c @@ -233,7 +233,9 @@ static int copy_hashes_authenticate_chunks_gen2(struct device *dev) chunk_table[0] = starting_chunk_nr + i; chunk_table[1] = linear_addr; do { + local_irq_disable(); wrmsrl(MSR_AUTHENTICATE_AND_COPY_CHUNK, (u64)chunk_table); + local_irq_enable(); rdmsrl(MSR_CHUNKS_AUTHENTICATION_STATUS, chunk_status.data); err_code = chunk_status.error_code; } while (err_code == AUTH_INTERRUPTED_ERROR && --retry_count); diff --git a/drivers/platform/x86/intel/ifs/runtest.c b/drivers/platform/x86/intel/ifs/runtest.c index 95b4b71fab..282e4bfe30 100644 --- a/drivers/platform/x86/intel/ifs/runtest.c +++ b/drivers/platform/x86/intel/ifs/runtest.c @@ -69,6 +69,19 @@ static const char * const scan_test_status[] = { static void message_not_tested(struct device *dev, int cpu, union ifs_status status) { + struct ifs_data *ifsd = ifs_get_data(dev); + + /* + * control_error is set when the microcode runs into a problem + * loading the image from the reserved BIOS memory, or it has + * been corrupted. Reloading the image may fix this issue. + */ + if (status.control_error) { + dev_warn(dev, "CPU(s) %*pbl: Scan controller error. Batch: %02x version: 0x%x\n", + cpumask_pr_args(cpu_smt_mask(cpu)), ifsd->cur_batch, ifsd->loaded_version); + return; + } + if (status.error_code < ARRAY_SIZE(scan_test_status)) { dev_info(dev, "CPU(s) %*pbl: SCAN operation did not start. %s\n", cpumask_pr_args(cpu_smt_mask(cpu)), @@ -91,16 +104,6 @@ static void message_fail(struct device *dev, int cpu, union ifs_status status) struct ifs_data *ifsd = ifs_get_data(dev); /* - * control_error is set when the microcode runs into a problem - * loading the image from the reserved BIOS memory, or it has - * been corrupted. Reloading the image may fix this issue. - */ - if (status.control_error) { - dev_err(dev, "CPU(s) %*pbl: could not execute from loaded scan image. Batch: %02x version: 0x%x\n", - cpumask_pr_args(cpu_smt_mask(cpu)), ifsd->cur_batch, ifsd->loaded_version); - } - - /* * signature_error is set when the output from the scan chains does not * match the expected signature. This might be a transient problem (e.g. * due to a bit flip from an alpha particle or neutron). If the problem @@ -285,10 +288,10 @@ static void ifs_test_core(int cpu, struct device *dev) /* Update status for this core */ ifsd->scan_details = status.data; - if (status.control_error || status.signature_error) { + if (status.signature_error) { ifsd->status = SCAN_TEST_FAIL; message_fail(dev, cpu, status); - } else if (status.error_code) { + } else if (status.control_error || status.error_code) { ifsd->status = SCAN_NOT_TESTED; message_not_tested(dev, cpu, status); } else { diff --git a/drivers/platform/x86/intel/pmc/arl.c b/drivers/platform/x86/intel/pmc/arl.c index 34b4cd23bf..e10527c4e3 100644 --- a/drivers/platform/x86/intel/pmc/arl.c +++ b/drivers/platform/x86/intel/pmc/arl.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /* * This file contains platform specific structure definitions - * and init function used by Meteor Lake PCH. + * and init function used by Arrow Lake PCH. * * Copyright (c) 2022, Intel Corporation. * All Rights Reserved. diff --git a/drivers/platform/x86/intel/pmc/core.c b/drivers/platform/x86/intel/pmc/core.c index 10c96c1a85..2ad2f8753e 100644 --- a/drivers/platform/x86/intel/pmc/core.c +++ b/drivers/platform/x86/intel/pmc/core.c @@ -678,6 +678,41 @@ static int pmc_core_ltr_show(struct seq_file *s, void *unused) } DEFINE_SHOW_ATTRIBUTE(pmc_core_ltr); +static int pmc_core_s0ix_blocker_show(struct seq_file *s, void *unused) +{ + struct pmc_dev *pmcdev = s->private; + unsigned int pmcidx; + + for (pmcidx = 0; pmcidx < ARRAY_SIZE(pmcdev->pmcs); pmcidx++) { + const struct pmc_bit_map **maps; + unsigned int arr_size, r_idx; + u32 offset, counter; + struct pmc *pmc; + + pmc = pmcdev->pmcs[pmcidx]; + if (!pmc) + continue; + maps = pmc->map->s0ix_blocker_maps; + offset = pmc->map->s0ix_blocker_offset; + arr_size = pmc_core_lpm_get_arr_size(maps); + + for (r_idx = 0; r_idx < arr_size; r_idx++) { + const struct pmc_bit_map *map; + + for (map = maps[r_idx]; map->name; map++) { + if (!map->blk) + continue; + counter = pmc_core_reg_read(pmc, offset); + seq_printf(s, "PMC%d:%-30s %-30d\n", pmcidx, + map->name, counter); + offset += map->blk * S0IX_BLK_SIZE; + } + } + } + return 0; +} +DEFINE_SHOW_ATTRIBUTE(pmc_core_s0ix_blocker); + static inline u64 adjust_lpm_residency(struct pmc *pmc, u32 offset, const int lpm_adj_x2) { @@ -1197,6 +1232,9 @@ static void pmc_core_dbgfs_register(struct pmc_dev *pmcdev) debugfs_create_file("ltr_show", 0444, dir, pmcdev, &pmc_core_ltr_fops); + if (primary_pmc->map->s0ix_blocker_maps) + debugfs_create_file("s0ix_blocker", 0444, dir, pmcdev, &pmc_core_s0ix_blocker_fops); + debugfs_create_file("package_cstate_show", 0444, dir, primary_pmc, &pmc_core_pkgc_fops); diff --git a/drivers/platform/x86/intel/pmc/core.h b/drivers/platform/x86/intel/pmc/core.h index 83504c49a0..ea04de7eb9 100644 --- a/drivers/platform/x86/intel/pmc/core.h +++ b/drivers/platform/x86/intel/pmc/core.h @@ -22,6 +22,7 @@ struct telem_endpoint; #define PMC_BASE_ADDR_DEFAULT 0xFE000000 #define MAX_NUM_PMC 3 +#define S0IX_BLK_SIZE 4 /* Sunrise Point Power Management Controller PCI Device ID */ #define SPT_PMC_PCI_DEVICE_ID 0x9d21 @@ -282,12 +283,14 @@ enum ppfear_regs { #define LNL_PMC_LTR_OSSE 0x1B88 #define LNL_NUM_IP_IGN_ALLOWED 27 #define LNL_PPFEAR_NUM_ENTRIES 12 +#define LNL_S0IX_BLOCKER_OFFSET 0x2004 extern const char *pmc_lpm_modes[]; struct pmc_bit_map { const char *name; u32 bit_mask; + u8 blk; }; /** @@ -298,6 +301,7 @@ struct pmc_bit_map { * @pll_sts: Maps name of PLL to corresponding bit status * @slps0_dbg_maps: Array of SLP_S0_DBG* registers containing debug info * @ltr_show_sts: Maps PCH IP Names to their MMIO register offsets + * @s0ix_blocker_maps: Maps name of IP block to S0ix blocker counter * @slp_s0_offset: PWRMBASE offset to read SLP_S0 residency * @ltr_ignore_offset: PWRMBASE offset to read/write LTR ignore bit * @regmap_length: Length of memory to map from PWRMBASE address to access @@ -307,6 +311,7 @@ struct pmc_bit_map { * @pm_cfg_offset: PWRMBASE offset to PM_CFG register * @pm_read_disable_bit: Bit index to read PMC_READ_DISABLE * @slps0_dbg_offset: PWRMBASE offset to SLP_S0_DEBUG_REG* + * @s0ix_blocker_offset PWRMBASE offset to S0ix blocker counter * * Each PCH has unique set of register offsets and bit indexes. This structure * captures them to have a common implementation. @@ -319,6 +324,7 @@ struct pmc_reg_map { const struct pmc_bit_map *ltr_show_sts; const struct pmc_bit_map *msr_sts; const struct pmc_bit_map **lpm_sts; + const struct pmc_bit_map **s0ix_blocker_maps; const u32 slp_s0_offset; const int slp_s0_res_counter_step; const u32 ltr_ignore_offset; @@ -330,6 +336,7 @@ struct pmc_reg_map { const u32 slps0_dbg_offset; const u32 ltr_ignore_max; const u32 pm_vric1_offset; + const u32 s0ix_blocker_offset; /* Low Power Mode registers */ const int lpm_num_maps; const int lpm_num_modes; @@ -535,8 +542,10 @@ extern const struct pmc_bit_map lnl_vnn_req_status_2_map[]; extern const struct pmc_bit_map lnl_vnn_req_status_3_map[]; extern const struct pmc_bit_map lnl_vnn_misc_status_map[]; extern const struct pmc_bit_map *lnl_lpm_maps[]; +extern const struct pmc_bit_map *lnl_blk_maps[]; extern const struct pmc_bit_map lnl_pfear_map[]; extern const struct pmc_bit_map *ext_lnl_pfear_map[]; +extern const struct pmc_bit_map lnl_signal_status_map[]; /* ARL */ extern const struct pmc_bit_map arl_socs_ltr_show_map[]; diff --git a/drivers/platform/x86/intel/pmc/lnl.c b/drivers/platform/x86/intel/pmc/lnl.c index 068d725046..e7a8077d1a 100644 --- a/drivers/platform/x86/intel/pmc/lnl.c +++ b/drivers/platform/x86/intel/pmc/lnl.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /* * This file contains platform specific structure definitions - * and init function used by Meteor Lake PCH. + * and init function used by Lunar Lake PCH. * * Copyright (c) 2022, Intel Corporation. * All Rights Reserved. @@ -56,264 +56,296 @@ const struct pmc_bit_map lnl_ltr_show_map[] = { }; const struct pmc_bit_map lnl_power_gating_status_0_map[] = { - {"PMC_PGD0_PG_STS", BIT(0)}, - {"FUSE_OSSE_PGD0_PG_STS", BIT(1)}, - {"ESPISPI_PGD0_PG_STS", BIT(2)}, - {"XHCI_PGD0_PG_STS", BIT(3)}, - {"SPA_PGD0_PG_STS", BIT(4)}, - {"SPB_PGD0_PG_STS", BIT(5)}, - {"SPR16B0_PGD0_PG_STS", BIT(6)}, - {"GBE_PGD0_PG_STS", BIT(7)}, - {"SBR8B7_PGD0_PG_STS", BIT(8)}, - {"SBR8B6_PGD0_PG_STS", BIT(9)}, - {"SBR16B1_PGD0_PG_STS", BIT(10)}, - {"SBR8B8_PGD0_PG_STS", BIT(11)}, - {"ESE_PGD3_PG_STS", BIT(12)}, - {"D2D_DISP_PGD0_PG_STS", BIT(13)}, - {"LPSS_PGD0_PG_STS", BIT(14)}, - {"LPC_PGD0_PG_STS", BIT(15)}, - {"SMB_PGD0_PG_STS", BIT(16)}, - {"ISH_PGD0_PG_STS", BIT(17)}, - {"SBR8B2_PGD0_PG_STS", BIT(18)}, - {"NPK_PGD0_PG_STS", BIT(19)}, - {"D2D_NOC_PGD0_PG_STS", BIT(20)}, - {"SAFSS_PGD0_PG_STS", BIT(21)}, - {"FUSE_PGD0_PG_STS", BIT(22)}, - {"D2D_DISP_PGD1_PG_STS", BIT(23)}, - {"MPFPW1_PGD0_PG_STS", BIT(24)}, - {"XDCI_PGD0_PG_STS", BIT(25)}, - {"EXI_PGD0_PG_STS", BIT(26)}, - {"CSE_PGD0_PG_STS", BIT(27)}, - {"KVMCC_PGD0_PG_STS", BIT(28)}, - {"PMT_PGD0_PG_STS", BIT(29)}, - {"CLINK_PGD0_PG_STS", BIT(30)}, - {"PTIO_PGD0_PG_STS", BIT(31)}, + {"PMC_PGD0_PG_STS", BIT(0), 0}, + {"FUSE_OSSE_PGD0_PG_STS", BIT(1), 0}, + {"ESPISPI_PGD0_PG_STS", BIT(2), 0}, + {"XHCI_PGD0_PG_STS", BIT(3), 1}, + {"SPA_PGD0_PG_STS", BIT(4), 1}, + {"SPB_PGD0_PG_STS", BIT(5), 1}, + {"SPR16B0_PGD0_PG_STS", BIT(6), 0}, + {"GBE_PGD0_PG_STS", BIT(7), 1}, + {"SBR8B7_PGD0_PG_STS", BIT(8), 0}, + {"SBR8B6_PGD0_PG_STS", BIT(9), 0}, + {"SBR16B1_PGD0_PG_STS", BIT(10), 0}, + {"SBR8B8_PGD0_PG_STS", BIT(11), 0}, + {"ESE_PGD3_PG_STS", BIT(12), 1}, + {"D2D_DISP_PGD0_PG_STS", BIT(13), 1}, + {"LPSS_PGD0_PG_STS", BIT(14), 1}, + {"LPC_PGD0_PG_STS", BIT(15), 0}, + {"SMB_PGD0_PG_STS", BIT(16), 0}, + {"ISH_PGD0_PG_STS", BIT(17), 0}, + {"SBR8B2_PGD0_PG_STS", BIT(18), 0}, + {"NPK_PGD0_PG_STS", BIT(19), 0}, + {"D2D_NOC_PGD0_PG_STS", BIT(20), 0}, + {"SAFSS_PGD0_PG_STS", BIT(21), 0}, + {"FUSE_PGD0_PG_STS", BIT(22), 0}, + {"D2D_DISP_PGD1_PG_STS", BIT(23), 1}, + {"MPFPW1_PGD0_PG_STS", BIT(24), 0}, + {"XDCI_PGD0_PG_STS", BIT(25), 1}, + {"EXI_PGD0_PG_STS", BIT(26), 0}, + {"CSE_PGD0_PG_STS", BIT(27), 1}, + {"KVMCC_PGD0_PG_STS", BIT(28), 1}, + {"PMT_PGD0_PG_STS", BIT(29), 1}, + {"CLINK_PGD0_PG_STS", BIT(30), 1}, + {"PTIO_PGD0_PG_STS", BIT(31), 1}, {} }; const struct pmc_bit_map lnl_power_gating_status_1_map[] = { - {"USBR0_PGD0_PG_STS", BIT(0)}, - {"SUSRAM_PGD0_PG_STS", BIT(1)}, - {"SMT1_PGD0_PG_STS", BIT(2)}, - {"U3FPW1_PGD0_PG_STS", BIT(3)}, - {"SMS2_PGD0_PG_STS", BIT(4)}, - {"SMS1_PGD0_PG_STS", BIT(5)}, - {"CSMERTC_PGD0_PG_STS", BIT(6)}, - {"CSMEPSF_PGD0_PG_STS", BIT(7)}, - {"FIA_PG_PGD0_PG_STS", BIT(8)}, - {"SBR16B4_PGD0_PG_STS", BIT(9)}, - {"P2SB8B_PGD0_PG_STS", BIT(10)}, - {"DBG_SBR_PGD0_PG_STS", BIT(11)}, - {"SBR8B9_PGD0_PG_STS", BIT(12)}, - {"OSSE_SMT1_PGD0_PG_STS", BIT(13)}, - {"SBR8B10_PGD0_PG_STS", BIT(14)}, - {"SBR16B3_PGD0_PG_STS", BIT(15)}, - {"G5FPW1_PGD0_PG_STS", BIT(16)}, - {"SBRG_PGD0_PG_STS", BIT(17)}, - {"PSF4_PGD0_PG_STS", BIT(18)}, - {"CNVI_PGD0_PG_STS", BIT(19)}, - {"USFX2_PGD0_PG_STS", BIT(20)}, - {"ENDBG_PGD0_PG_STS", BIT(21)}, - {"FIACPCB_P5X4_PGD0_PG_STS", BIT(22)}, - {"SBR8B3_PGD0_PG_STS", BIT(23)}, - {"SBR8B0_PGD0_PG_STS", BIT(24)}, - {"NPK_PGD1_PG_STS", BIT(25)}, - {"OSSE_HOTHAM_PGD0_PG_STS", BIT(26)}, - {"D2D_NOC_PGD2_PG_STS", BIT(27)}, - {"SBR8B1_PGD0_PG_STS", BIT(28)}, - {"PSF6_PGD0_PG_STS", BIT(29)}, - {"PSF7_PGD0_PG_STS", BIT(30)}, - {"FIA_U_PGD0_PG_STS", BIT(31)}, + {"USBR0_PGD0_PG_STS", BIT(0), 1}, + {"SUSRAM_PGD0_PG_STS", BIT(1), 1}, + {"SMT1_PGD0_PG_STS", BIT(2), 1}, + {"U3FPW1_PGD0_PG_STS", BIT(3), 0}, + {"SMS2_PGD0_PG_STS", BIT(4), 1}, + {"SMS1_PGD0_PG_STS", BIT(5), 1}, + {"CSMERTC_PGD0_PG_STS", BIT(6), 0}, + {"CSMEPSF_PGD0_PG_STS", BIT(7), 0}, + {"FIA_PG_PGD0_PG_STS", BIT(8), 0}, + {"SBR16B4_PGD0_PG_STS", BIT(9), 0}, + {"P2SB8B_PGD0_PG_STS", BIT(10), 1}, + {"DBG_SBR_PGD0_PG_STS", BIT(11), 0}, + {"SBR8B9_PGD0_PG_STS", BIT(12), 0}, + {"OSSE_SMT1_PGD0_PG_STS", BIT(13), 1}, + {"SBR8B10_PGD0_PG_STS", BIT(14), 0}, + {"SBR16B3_PGD0_PG_STS", BIT(15), 0}, + {"G5FPW1_PGD0_PG_STS", BIT(16), 0}, + {"SBRG_PGD0_PG_STS", BIT(17), 0}, + {"PSF4_PGD0_PG_STS", BIT(18), 0}, + {"CNVI_PGD0_PG_STS", BIT(19), 0}, + {"USFX2_PGD0_PG_STS", BIT(20), 1}, + {"ENDBG_PGD0_PG_STS", BIT(21), 0}, + {"FIACPCB_P5X4_PGD0_PG_STS", BIT(22), 0}, + {"SBR8B3_PGD0_PG_STS", BIT(23), 0}, + {"SBR8B0_PGD0_PG_STS", BIT(24), 0}, + {"NPK_PGD1_PG_STS", BIT(25), 0}, + {"OSSE_HOTHAM_PGD0_PG_STS", BIT(26), 1}, + {"D2D_NOC_PGD2_PG_STS", BIT(27), 1}, + {"SBR8B1_PGD0_PG_STS", BIT(28), 0}, + {"PSF6_PGD0_PG_STS", BIT(29), 0}, + {"PSF7_PGD0_PG_STS", BIT(30), 0}, + {"FIA_U_PGD0_PG_STS", BIT(31), 0}, {} }; const struct pmc_bit_map lnl_power_gating_status_2_map[] = { - {"PSF8_PGD0_PG_STS", BIT(0)}, - {"SBR16B2_PGD0_PG_STS", BIT(1)}, - {"D2D_IPU_PGD0_PG_STS", BIT(2)}, - {"FIACPCB_U_PGD0_PG_STS", BIT(3)}, - {"TAM_PGD0_PG_STS", BIT(4)}, - {"D2D_NOC_PGD1_PG_STS", BIT(5)}, - {"TBTLSX_PGD0_PG_STS", BIT(6)}, - {"THC0_PGD0_PG_STS", BIT(7)}, - {"THC1_PGD0_PG_STS", BIT(8)}, - {"PMC_PGD0_PG_STS", BIT(9)}, - {"SBR8B5_PGD0_PG_STS", BIT(10)}, - {"UFSPW1_PGD0_PG_STS", BIT(11)}, - {"DBC_PGD0_PG_STS", BIT(12)}, - {"TCSS_PGD0_PG_STS", BIT(13)}, - {"FIA_P5X4_PGD0_PG_STS", BIT(14)}, - {"DISP_PGA_PGD0_PG_STS", BIT(15)}, - {"DISP_PSF_PGD0_PG_STS", BIT(16)}, - {"PSF0_PGD0_PG_STS", BIT(17)}, - {"P2SB16B_PGD0_PG_STS", BIT(18)}, - {"ACE_PGD0_PG_STS", BIT(19)}, - {"ACE_PGD1_PG_STS", BIT(20)}, - {"ACE_PGD2_PG_STS", BIT(21)}, - {"ACE_PGD3_PG_STS", BIT(22)}, - {"ACE_PGD4_PG_STS", BIT(23)}, - {"ACE_PGD5_PG_STS", BIT(24)}, - {"ACE_PGD6_PG_STS", BIT(25)}, - {"ACE_PGD7_PG_STS", BIT(26)}, - {"ACE_PGD8_PG_STS", BIT(27)}, - {"ACE_PGD9_PG_STS", BIT(28)}, - {"ACE_PGD10_PG_STS", BIT(29)}, - {"FIACPCB_PG_PGD0_PG_STS", BIT(30)}, - {"OSSE_PGD0_PG_STS", BIT(31)}, + {"PSF8_PGD0_PG_STS", BIT(0), 0}, + {"SBR16B2_PGD0_PG_STS", BIT(1), 0}, + {"D2D_IPU_PGD0_PG_STS", BIT(2), 1}, + {"FIACPCB_U_PGD0_PG_STS", BIT(3), 0}, + {"TAM_PGD0_PG_STS", BIT(4), 1}, + {"D2D_NOC_PGD1_PG_STS", BIT(5), 1}, + {"TBTLSX_PGD0_PG_STS", BIT(6), 1}, + {"THC0_PGD0_PG_STS", BIT(7), 1}, + {"THC1_PGD0_PG_STS", BIT(8), 1}, + {"PMC_PGD0_PG_STS", BIT(9), 0}, + {"SBR8B5_PGD0_PG_STS", BIT(10), 0}, + {"UFSPW1_PGD0_PG_STS", BIT(11), 0}, + {"DBC_PGD0_PG_STS", BIT(12), 0}, + {"TCSS_PGD0_PG_STS", BIT(13), 0}, + {"FIA_P5X4_PGD0_PG_STS", BIT(14), 0}, + {"DISP_PGA_PGD0_PG_STS", BIT(15), 0}, + {"DISP_PSF_PGD0_PG_STS", BIT(16), 0}, + {"PSF0_PGD0_PG_STS", BIT(17), 0}, + {"P2SB16B_PGD0_PG_STS", BIT(18), 1}, + {"ACE_PGD0_PG_STS", BIT(19), 0}, + {"ACE_PGD1_PG_STS", BIT(20), 0}, + {"ACE_PGD2_PG_STS", BIT(21), 0}, + {"ACE_PGD3_PG_STS", BIT(22), 0}, + {"ACE_PGD4_PG_STS", BIT(23), 0}, + {"ACE_PGD5_PG_STS", BIT(24), 0}, + {"ACE_PGD6_PG_STS", BIT(25), 0}, + {"ACE_PGD7_PG_STS", BIT(26), 0}, + {"ACE_PGD8_PG_STS", BIT(27), 0}, + {"ACE_PGD9_PG_STS", BIT(28), 0}, + {"ACE_PGD10_PG_STS", BIT(29), 0}, + {"FIACPCB_PG_PGD0_PG_STS", BIT(30), 0}, + {"OSSE_PGD0_PG_STS", BIT(31), 1}, {} }; const struct pmc_bit_map lnl_d3_status_0_map[] = { - {"LPSS_D3_STS", BIT(3)}, - {"XDCI_D3_STS", BIT(4)}, - {"XHCI_D3_STS", BIT(5)}, - {"SPA_D3_STS", BIT(12)}, - {"SPB_D3_STS", BIT(13)}, - {"OSSE_D3_STS", BIT(15)}, - {"ESPISPI_D3_STS", BIT(18)}, - {"PSTH_D3_STS", BIT(21)}, + {"LPSS_D3_STS", BIT(3), 1}, + {"XDCI_D3_STS", BIT(4), 1}, + {"XHCI_D3_STS", BIT(5), 1}, + {"SPA_D3_STS", BIT(12), 0}, + {"SPB_D3_STS", BIT(13), 0}, + {"OSSE_D3_STS", BIT(15), 0}, + {"ESPISPI_D3_STS", BIT(18), 0}, + {"PSTH_D3_STS", BIT(21), 0}, {} }; const struct pmc_bit_map lnl_d3_status_1_map[] = { - {"OSSE_SMT1_D3_STS", BIT(7)}, - {"GBE_D3_STS", BIT(19)}, - {"ITSS_D3_STS", BIT(23)}, - {"CNVI_D3_STS", BIT(27)}, - {"UFSX2_D3_STS", BIT(28)}, - {"OSSE_HOTHAM_D3_STS", BIT(31)}, + {"OSSE_SMT1_D3_STS", BIT(7), 0}, + {"GBE_D3_STS", BIT(19), 0}, + {"ITSS_D3_STS", BIT(23), 0}, + {"CNVI_D3_STS", BIT(27), 0}, + {"UFSX2_D3_STS", BIT(28), 1}, + {"OSSE_HOTHAM_D3_STS", BIT(31), 0}, {} }; const struct pmc_bit_map lnl_d3_status_2_map[] = { - {"ESE_D3_STS", BIT(0)}, - {"CSMERTC_D3_STS", BIT(1)}, - {"SUSRAM_D3_STS", BIT(2)}, - {"CSE_D3_STS", BIT(4)}, - {"KVMCC_D3_STS", BIT(5)}, - {"USBR0_D3_STS", BIT(6)}, - {"ISH_D3_STS", BIT(7)}, - {"SMT1_D3_STS", BIT(8)}, - {"SMT2_D3_STS", BIT(9)}, - {"SMT3_D3_STS", BIT(10)}, - {"OSSE_SMT2_D3_STS", BIT(13)}, - {"CLINK_D3_STS", BIT(14)}, - {"PTIO_D3_STS", BIT(16)}, - {"PMT_D3_STS", BIT(17)}, - {"SMS1_D3_STS", BIT(18)}, - {"SMS2_D3_STS", BIT(19)}, + {"ESE_D3_STS", BIT(0), 0}, + {"CSMERTC_D3_STS", BIT(1), 0}, + {"SUSRAM_D3_STS", BIT(2), 0}, + {"CSE_D3_STS", BIT(4), 0}, + {"KVMCC_D3_STS", BIT(5), 0}, + {"USBR0_D3_STS", BIT(6), 0}, + {"ISH_D3_STS", BIT(7), 0}, + {"SMT1_D3_STS", BIT(8), 0}, + {"SMT2_D3_STS", BIT(9), 0}, + {"SMT3_D3_STS", BIT(10), 0}, + {"OSSE_SMT2_D3_STS", BIT(13), 0}, + {"CLINK_D3_STS", BIT(14), 0}, + {"PTIO_D3_STS", BIT(16), 0}, + {"PMT_D3_STS", BIT(17), 0}, + {"SMS1_D3_STS", BIT(18), 0}, + {"SMS2_D3_STS", BIT(19), 0}, {} }; const struct pmc_bit_map lnl_d3_status_3_map[] = { - {"THC0_D3_STS", BIT(14)}, - {"THC1_D3_STS", BIT(15)}, - {"OSSE_SMT3_D3_STS", BIT(21)}, - {"ACE_D3_STS", BIT(23)}, + {"THC0_D3_STS", BIT(14), 1}, + {"THC1_D3_STS", BIT(15), 1}, + {"OSSE_SMT3_D3_STS", BIT(21), 0}, + {"ACE_D3_STS", BIT(23), 0}, {} }; const struct pmc_bit_map lnl_vnn_req_status_0_map[] = { - {"LPSS_VNN_REQ_STS", BIT(3)}, - {"OSSE_VNN_REQ_STS", BIT(15)}, - {"ESPISPI_VNN_REQ_STS", BIT(18)}, + {"LPSS_VNN_REQ_STS", BIT(3), 1}, + {"OSSE_VNN_REQ_STS", BIT(15), 1}, + {"ESPISPI_VNN_REQ_STS", BIT(18), 1}, {} }; const struct pmc_bit_map lnl_vnn_req_status_1_map[] = { - {"NPK_VNN_REQ_STS", BIT(4)}, - {"OSSE_SMT1_VNN_REQ_STS", BIT(7)}, - {"DFXAGG_VNN_REQ_STS", BIT(8)}, - {"EXI_VNN_REQ_STS", BIT(9)}, - {"P2D_VNN_REQ_STS", BIT(18)}, - {"GBE_VNN_REQ_STS", BIT(19)}, - {"SMB_VNN_REQ_STS", BIT(25)}, - {"LPC_VNN_REQ_STS", BIT(26)}, + {"NPK_VNN_REQ_STS", BIT(4), 1}, + {"OSSE_SMT1_VNN_REQ_STS", BIT(7), 1}, + {"DFXAGG_VNN_REQ_STS", BIT(8), 0}, + {"EXI_VNN_REQ_STS", BIT(9), 1}, + {"P2D_VNN_REQ_STS", BIT(18), 1}, + {"GBE_VNN_REQ_STS", BIT(19), 1}, + {"SMB_VNN_REQ_STS", BIT(25), 1}, + {"LPC_VNN_REQ_STS", BIT(26), 0}, {} }; const struct pmc_bit_map lnl_vnn_req_status_2_map[] = { - {"eSE_VNN_REQ_STS", BIT(0)}, - {"CSMERTC_VNN_REQ_STS", BIT(1)}, - {"CSE_VNN_REQ_STS", BIT(4)}, - {"ISH_VNN_REQ_STS", BIT(7)}, - {"SMT1_VNN_REQ_STS", BIT(8)}, - {"CLINK_VNN_REQ_STS", BIT(14)}, - {"SMS1_VNN_REQ_STS", BIT(18)}, - {"SMS2_VNN_REQ_STS", BIT(19)}, - {"GPIOCOM4_VNN_REQ_STS", BIT(20)}, - {"GPIOCOM3_VNN_REQ_STS", BIT(21)}, - {"GPIOCOM2_VNN_REQ_STS", BIT(22)}, - {"GPIOCOM1_VNN_REQ_STS", BIT(23)}, - {"GPIOCOM0_VNN_REQ_STS", BIT(24)}, + {"eSE_VNN_REQ_STS", BIT(0), 1}, + {"CSMERTC_VNN_REQ_STS", BIT(1), 1}, + {"CSE_VNN_REQ_STS", BIT(4), 1}, + {"ISH_VNN_REQ_STS", BIT(7), 1}, + {"SMT1_VNN_REQ_STS", BIT(8), 1}, + {"CLINK_VNN_REQ_STS", BIT(14), 1}, + {"SMS1_VNN_REQ_STS", BIT(18), 1}, + {"SMS2_VNN_REQ_STS", BIT(19), 1}, + {"GPIOCOM4_VNN_REQ_STS", BIT(20), 1}, + {"GPIOCOM3_VNN_REQ_STS", BIT(21), 1}, + {"GPIOCOM2_VNN_REQ_STS", BIT(22), 0}, + {"GPIOCOM1_VNN_REQ_STS", BIT(23), 1}, + {"GPIOCOM0_VNN_REQ_STS", BIT(24), 1}, {} }; const struct pmc_bit_map lnl_vnn_req_status_3_map[] = { - {"DISP_SHIM_VNN_REQ_STS", BIT(2)}, - {"DTS0_VNN_REQ_STS", BIT(7)}, - {"GPIOCOM5_VNN_REQ_STS", BIT(11)}, + {"DISP_SHIM_VNN_REQ_STS", BIT(2), 0}, + {"DTS0_VNN_REQ_STS", BIT(7), 0}, + {"GPIOCOM5_VNN_REQ_STS", BIT(11), 2}, {} }; const struct pmc_bit_map lnl_vnn_misc_status_map[] = { - {"CPU_C10_REQ_STS", BIT(0)}, - {"TS_OFF_REQ_STS", BIT(1)}, - {"PNDE_MET_REQ_STS", BIT(2)}, - {"PCIE_DEEP_PM_REQ_STS", BIT(3)}, - {"PMC_CLK_THROTTLE_EN_REQ_STS", BIT(4)}, - {"NPK_VNNAON_REQ_STS", BIT(5)}, - {"VNN_SOC_REQ_STS", BIT(6)}, - {"ISH_VNNAON_REQ_STS", BIT(7)}, - {"D2D_NOC_CFI_QACTIVE_REQ_STS", BIT(8)}, - {"D2D_NOC_GPSB_QACTIVE_REQ_STS", BIT(9)}, - {"D2D_NOC_IPU_QACTIVE_REQ_STS", BIT(10)}, - {"PLT_GREATER_REQ_STS", BIT(11)}, - {"PCIE_CLKREQ_REQ_STS", BIT(12)}, - {"PMC_IDLE_FB_OCP_REQ_STS", BIT(13)}, - {"PM_SYNC_STATES_REQ_STS", BIT(14)}, - {"EA_REQ_STS", BIT(15)}, - {"MPHY_CORE_OFF_REQ_STS", BIT(16)}, - {"BRK_EV_EN_REQ_STS", BIT(17)}, - {"AUTO_DEMO_EN_REQ_STS", BIT(18)}, - {"ITSS_CLK_SRC_REQ_STS", BIT(19)}, - {"LPC_CLK_SRC_REQ_STS", BIT(20)}, - {"ARC_IDLE_REQ_STS", BIT(21)}, - {"MPHY_SUS_REQ_STS", BIT(22)}, - {"FIA_DEEP_PM_REQ_STS", BIT(23)}, - {"UXD_CONNECTED_REQ_STS", BIT(24)}, - {"ARC_INTERRUPT_WAKE_REQ_STS", BIT(25)}, - {"D2D_NOC_DISP_DDI_QACTIVE_REQ_STS", BIT(26)}, - {"PRE_WAKE0_REQ_STS", BIT(27)}, - {"PRE_WAKE1_REQ_STS", BIT(28)}, - {"PRE_WAKE2_EN_REQ_STS", BIT(29)}, - {"WOV_REQ_STS", BIT(30)}, - {"D2D_NOC_DISP_EDP_QACTIVE_REQ_STS_31", BIT(31)}, + {"CPU_C10_REQ_STS", BIT(0), 0}, + {"TS_OFF_REQ_STS", BIT(1), 0}, + {"PNDE_MET_REQ_STS", BIT(2), 1}, + {"PCIE_DEEP_PM_REQ_STS", BIT(3), 0}, + {"PMC_CLK_THROTTLE_EN_REQ_STS", BIT(4), 0}, + {"NPK_VNNAON_REQ_STS", BIT(5), 0}, + {"VNN_SOC_REQ_STS", BIT(6), 1}, + {"ISH_VNNAON_REQ_STS", BIT(7), 0}, + {"D2D_NOC_CFI_QACTIVE_REQ_STS", BIT(8), 1}, + {"D2D_NOC_GPSB_QACTIVE_REQ_STS", BIT(9), 1}, + {"D2D_NOC_IPU_QACTIVE_REQ_STS", BIT(10), 1}, + {"PLT_GREATER_REQ_STS", BIT(11), 1}, + {"PCIE_CLKREQ_REQ_STS", BIT(12), 0}, + {"PMC_IDLE_FB_OCP_REQ_STS", BIT(13), 0}, + {"PM_SYNC_STATES_REQ_STS", BIT(14), 0}, + {"EA_REQ_STS", BIT(15), 0}, + {"MPHY_CORE_OFF_REQ_STS", BIT(16), 0}, + {"BRK_EV_EN_REQ_STS", BIT(17), 0}, + {"AUTO_DEMO_EN_REQ_STS", BIT(18), 0}, + {"ITSS_CLK_SRC_REQ_STS", BIT(19), 1}, + {"LPC_CLK_SRC_REQ_STS", BIT(20), 0}, + {"ARC_IDLE_REQ_STS", BIT(21), 0}, + {"MPHY_SUS_REQ_STS", BIT(22), 0}, + {"FIA_DEEP_PM_REQ_STS", BIT(23), 0}, + {"UXD_CONNECTED_REQ_STS", BIT(24), 1}, + {"ARC_INTERRUPT_WAKE_REQ_STS", BIT(25), 0}, + {"D2D_NOC_DISP_DDI_QACTIVE_REQ_STS", BIT(26), 1}, + {"PRE_WAKE0_REQ_STS", BIT(27), 1}, + {"PRE_WAKE1_REQ_STS", BIT(28), 1}, + {"PRE_WAKE2_EN_REQ_STS", BIT(29), 1}, + {"WOV_REQ_STS", BIT(30), 0}, + {"D2D_NOC_DISP_EDP_QACTIVE_REQ_STS_31", BIT(31), 1}, {} }; const struct pmc_bit_map lnl_clocksource_status_map[] = { - {"AON2_OFF_STS", BIT(0)}, - {"AON3_OFF_STS", BIT(1)}, - {"AON4_OFF_STS", BIT(2)}, - {"AON5_OFF_STS", BIT(3)}, - {"AON1_OFF_STS", BIT(4)}, - {"MPFPW1_0_PLL_OFF_STS", BIT(6)}, - {"USB3_PLL_OFF_STS", BIT(8)}, - {"AON3_SPL_OFF_STS", BIT(9)}, - {"G5FPW1_PLL_OFF_STS", BIT(15)}, - {"XTAL_AGGR_OFF_STS", BIT(17)}, - {"USB2_PLL_OFF_STS", BIT(18)}, - {"SAF_PLL_OFF_STS", BIT(19)}, - {"SE_TCSS_PLL_OFF_STS", BIT(20)}, - {"DDI_PLL_OFF_STS", BIT(21)}, - {"FILTER_PLL_OFF_STS", BIT(22)}, - {"ACE_PLL_OFF_STS", BIT(24)}, - {"FABRIC_PLL_OFF_STS", BIT(25)}, - {"SOC_PLL_OFF_STS", BIT(26)}, - {"REF_OFF_STS", BIT(28)}, - {"IMG_OFF_STS", BIT(29)}, - {"RTC_PLL_OFF_STS", BIT(31)}, + {"AON2_OFF_STS", BIT(0), 0}, + {"AON3_OFF_STS", BIT(1), 1}, + {"AON4_OFF_STS", BIT(2), 1}, + {"AON5_OFF_STS", BIT(3), 1}, + {"AON1_OFF_STS", BIT(4), 0}, + {"MPFPW1_0_PLL_OFF_STS", BIT(6), 1}, + {"USB3_PLL_OFF_STS", BIT(8), 1}, + {"AON3_SPL_OFF_STS", BIT(9), 1}, + {"G5FPW1_PLL_OFF_STS", BIT(15), 1}, + {"XTAL_AGGR_OFF_STS", BIT(17), 1}, + {"USB2_PLL_OFF_STS", BIT(18), 0}, + {"SAF_PLL_OFF_STS", BIT(19), 1}, + {"SE_TCSS_PLL_OFF_STS", BIT(20), 1}, + {"DDI_PLL_OFF_STS", BIT(21), 1}, + {"FILTER_PLL_OFF_STS", BIT(22), 1}, + {"ACE_PLL_OFF_STS", BIT(24), 0}, + {"FABRIC_PLL_OFF_STS", BIT(25), 1}, + {"SOC_PLL_OFF_STS", BIT(26), 1}, + {"REF_OFF_STS", BIT(28), 1}, + {"IMG_OFF_STS", BIT(29), 1}, + {"RTC_PLL_OFF_STS", BIT(31), 0}, + {} +}; + +const struct pmc_bit_map lnl_signal_status_map[] = { + {"LSX_Wake0_STS", BIT(0), 0}, + {"LSX_Wake1_STS", BIT(1), 0}, + {"LSX_Wake2_STS", BIT(2), 0}, + {"LSX_Wake3_STS", BIT(3), 0}, + {"LSX_Wake4_STS", BIT(4), 0}, + {"LSX_Wake5_STS", BIT(5), 0}, + {"LSX_Wake6_STS", BIT(6), 0}, + {"LSX_Wake7_STS", BIT(7), 0}, + {"LPSS_Wake0_STS", BIT(8), 1}, + {"LPSS_Wake1_STS", BIT(9), 1}, + {"Int_Timer_SS_Wake0_STS", BIT(10), 1}, + {"Int_Timer_SS_Wake1_STS", BIT(11), 1}, + {"Int_Timer_SS_Wake2_STS", BIT(12), 1}, + {"Int_Timer_SS_Wake3_STS", BIT(13), 1}, + {"Int_Timer_SS_Wake4_STS", BIT(14), 1}, + {"Int_Timer_SS_Wake5_STS", BIT(15), 1}, + {} +}; + +const struct pmc_bit_map lnl_rsc_status_map[] = { + {"Memory", 0, 1}, + {"PSF0", 0, 1}, + {"PSF4", 0, 1}, + {"PSF6", 0, 1}, + {"PSF7", 0, 1}, + {"PSF8", 0, 1}, + {"SAF_CFI_LINK", 0, 1}, + {"SBR", 0, 1}, {} }; @@ -331,7 +363,26 @@ const struct pmc_bit_map *lnl_lpm_maps[] = { lnl_vnn_req_status_2_map, lnl_vnn_req_status_3_map, lnl_vnn_misc_status_map, - mtl_socm_signal_status_map, + lnl_signal_status_map, + NULL +}; + +const struct pmc_bit_map *lnl_blk_maps[] = { + lnl_power_gating_status_0_map, + lnl_power_gating_status_1_map, + lnl_power_gating_status_2_map, + lnl_rsc_status_map, + lnl_vnn_req_status_0_map, + lnl_vnn_req_status_1_map, + lnl_vnn_req_status_2_map, + lnl_vnn_req_status_3_map, + lnl_d3_status_0_map, + lnl_d3_status_1_map, + lnl_d3_status_2_map, + lnl_d3_status_3_map, + lnl_clocksource_status_map, + lnl_vnn_misc_status_map, + lnl_signal_status_map, NULL }; @@ -475,6 +526,8 @@ const struct pmc_reg_map lnl_socm_reg_map = { .lpm_sts = lnl_lpm_maps, .lpm_status_offset = MTL_LPM_STATUS_OFFSET, .lpm_live_status_offset = MTL_LPM_LIVE_STATUS_OFFSET, + .s0ix_blocker_maps = lnl_blk_maps, + .s0ix_blocker_offset = LNL_S0IX_BLOCKER_OFFSET, }; #define LNL_NPU_PCI_DEV 0x643e diff --git a/drivers/platform/x86/intel/pmc/pltdrv.c b/drivers/platform/x86/intel/pmc/pltdrv.c index ddfba38c21..f2cb87dc2d 100644 --- a/drivers/platform/x86/intel/pmc/pltdrv.c +++ b/drivers/platform/x86/intel/pmc/pltdrv.c @@ -86,4 +86,5 @@ static void __exit pmc_core_platform_exit(void) module_init(pmc_core_platform_init); module_exit(pmc_core_platform_exit); +MODULE_DESCRIPTION("Intel PMC Core platform driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/platform/x86/intel/rst.c b/drivers/platform/x86/intel/rst.c index 35814a7707..f3a60e14d4 100644 --- a/drivers/platform/x86/intel/rst.c +++ b/drivers/platform/x86/intel/rst.c @@ -7,6 +7,7 @@ #include <linux/module.h> #include <linux/slab.h> +MODULE_DESCRIPTION("Intel Rapid Start Technology Driver"); MODULE_LICENSE("GPL"); static ssize_t irst_show_wakeup_events(struct device *dev, @@ -125,7 +126,6 @@ static const struct acpi_device_id irst_ids[] = { }; static struct acpi_driver irst_driver = { - .owner = THIS_MODULE, .name = "intel_rapid_start", .class = "intel_rapid_start", .ids = irst_ids, diff --git a/drivers/platform/x86/intel/sdsi.c b/drivers/platform/x86/intel/sdsi.c index 556e7c6dbb..277e4f4b20 100644 --- a/drivers/platform/x86/intel/sdsi.c +++ b/drivers/platform/x86/intel/sdsi.c @@ -15,6 +15,7 @@ #include <linux/iopoll.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/overflow.h> #include <linux/pci.h> #include <linux/slab.h> #include <linux/sysfs.h> @@ -66,6 +67,8 @@ #define CTRL_OWNER GENMASK(5, 4) #define CTRL_COMPLETE BIT(6) #define CTRL_READY BIT(7) +#define CTRL_INBAND_LOCK BIT(32) +#define CTRL_METER_ENABLE_DRAM BIT(33) #define CTRL_STATUS GENMASK(15, 8) #define CTRL_PACKET_SIZE GENMASK(31, 16) #define CTRL_MSG_SIZE GENMASK(63, 48) @@ -93,6 +96,7 @@ enum sdsi_command { struct sdsi_mbox_info { u64 *payload; void *buffer; + u64 control_flags; int size; }; @@ -156,8 +160,8 @@ static int sdsi_status_to_errno(u32 status) } } -static int sdsi_mbox_cmd_read(struct sdsi_priv *priv, struct sdsi_mbox_info *info, - size_t *data_size) +static int sdsi_mbox_poll(struct sdsi_priv *priv, struct sdsi_mbox_info *info, + size_t *data_size) { struct device *dev = priv->dev; u32 total, loop, eom, status, message_size; @@ -166,18 +170,10 @@ static int sdsi_mbox_cmd_read(struct sdsi_priv *priv, struct sdsi_mbox_info *inf lockdep_assert_held(&priv->mb_lock); - /* Format and send the read command */ - control = FIELD_PREP(CTRL_EOM, 1) | - FIELD_PREP(CTRL_SOM, 1) | - FIELD_PREP(CTRL_RUN_BUSY, 1) | - FIELD_PREP(CTRL_PACKET_SIZE, info->size); - writeq(control, priv->control_addr); - /* For reads, data sizes that are larger than the mailbox size are read in packets. */ total = 0; loop = 0; do { - void *buf = info->buffer + (SDSI_SIZE_MAILBOX * loop); u32 packet_size; /* Poll on ready bit */ @@ -195,6 +191,11 @@ static int sdsi_mbox_cmd_read(struct sdsi_priv *priv, struct sdsi_mbox_info *inf if (ret) break; + if (!packet_size) { + sdsi_complete_transaction(priv); + break; + } + /* Only the last packet can be less than the mailbox size. */ if (!eom && packet_size != SDSI_SIZE_MAILBOX) { dev_err(dev, "Invalid packet size\n"); @@ -208,9 +209,13 @@ static int sdsi_mbox_cmd_read(struct sdsi_priv *priv, struct sdsi_mbox_info *inf break; } - sdsi_memcpy64_fromio(buf, priv->mbox_addr, round_up(packet_size, SDSI_SIZE_CMD)); + if (info->buffer) { + void *buf = info->buffer + array_size(SDSI_SIZE_MAILBOX, loop); - total += packet_size; + sdsi_memcpy64_fromio(buf, priv->mbox_addr, + round_up(packet_size, SDSI_SIZE_CMD)); + total += packet_size; + } sdsi_complete_transaction(priv); } while (!eom && ++loop < MBOX_MAX_PACKETS); @@ -230,16 +235,34 @@ static int sdsi_mbox_cmd_read(struct sdsi_priv *priv, struct sdsi_mbox_info *inf dev_warn(dev, "Read count %u differs from expected count %u\n", total, message_size); - *data_size = total; + if (data_size) + *data_size = total; return 0; } -static int sdsi_mbox_cmd_write(struct sdsi_priv *priv, struct sdsi_mbox_info *info) +static int sdsi_mbox_cmd_read(struct sdsi_priv *priv, struct sdsi_mbox_info *info, + size_t *data_size) +{ + u64 control; + + lockdep_assert_held(&priv->mb_lock); + + /* Format and send the read command */ + control = FIELD_PREP(CTRL_EOM, 1) | + FIELD_PREP(CTRL_SOM, 1) | + FIELD_PREP(CTRL_RUN_BUSY, 1) | + FIELD_PREP(CTRL_PACKET_SIZE, info->size) | + info->control_flags; + writeq(control, priv->control_addr); + + return sdsi_mbox_poll(priv, info, data_size); +} + +static int sdsi_mbox_cmd_write(struct sdsi_priv *priv, struct sdsi_mbox_info *info, + size_t *data_size) { u64 control; - u32 status; - int ret; lockdep_assert_held(&priv->mb_lock); @@ -252,23 +275,11 @@ static int sdsi_mbox_cmd_write(struct sdsi_priv *priv, struct sdsi_mbox_info *in FIELD_PREP(CTRL_SOM, 1) | FIELD_PREP(CTRL_RUN_BUSY, 1) | FIELD_PREP(CTRL_READ_WRITE, 1) | + FIELD_PREP(CTRL_MSG_SIZE, info->size) | FIELD_PREP(CTRL_PACKET_SIZE, info->size); writeq(control, priv->control_addr); - /* Poll on ready bit */ - ret = readq_poll_timeout(priv->control_addr, control, control & CTRL_READY, - MBOX_POLLING_PERIOD_US, MBOX_TIMEOUT_US); - - if (ret) - goto release_mbox; - - status = FIELD_GET(CTRL_STATUS, control); - ret = sdsi_status_to_errno(status); - -release_mbox: - sdsi_complete_transaction(priv); - - return ret; + return sdsi_mbox_poll(priv, info, data_size); } static int sdsi_mbox_acquire(struct sdsi_priv *priv, struct sdsi_mbox_info *info) @@ -312,7 +323,8 @@ static int sdsi_mbox_acquire(struct sdsi_priv *priv, struct sdsi_mbox_info *info return ret; } -static int sdsi_mbox_write(struct sdsi_priv *priv, struct sdsi_mbox_info *info) +static int sdsi_mbox_write(struct sdsi_priv *priv, struct sdsi_mbox_info *info, + size_t *data_size) { int ret; @@ -322,7 +334,7 @@ static int sdsi_mbox_write(struct sdsi_priv *priv, struct sdsi_mbox_info *info) if (ret) return ret; - return sdsi_mbox_cmd_write(priv, info); + return sdsi_mbox_cmd_write(priv, info, data_size); } static int sdsi_mbox_read(struct sdsi_priv *priv, struct sdsi_mbox_info *info, size_t *data_size) @@ -338,15 +350,24 @@ static int sdsi_mbox_read(struct sdsi_priv *priv, struct sdsi_mbox_info *info, s return sdsi_mbox_cmd_read(priv, info, data_size); } +static bool sdsi_ib_locked(struct sdsi_priv *priv) +{ + return !!FIELD_GET(CTRL_INBAND_LOCK, readq(priv->control_addr)); +} + static ssize_t sdsi_provision(struct sdsi_priv *priv, char *buf, size_t count, enum sdsi_command command) { - struct sdsi_mbox_info info; + struct sdsi_mbox_info info = {}; int ret; if (count > (SDSI_SIZE_WRITE_MSG - SDSI_SIZE_CMD)) return -EOVERFLOW; + /* Make sure In-band lock is not set */ + if (sdsi_ib_locked(priv)) + return -EPERM; + /* Qword aligned message + command qword */ info.size = round_up(count, SDSI_SIZE_CMD) + SDSI_SIZE_CMD; @@ -363,7 +384,9 @@ static ssize_t sdsi_provision(struct sdsi_priv *priv, char *buf, size_t count, ret = mutex_lock_interruptible(&priv->mb_lock); if (ret) goto free_payload; - ret = sdsi_mbox_write(priv, &info); + + ret = sdsi_mbox_write(priv, &info, NULL); + mutex_unlock(&priv->mb_lock); free_payload: @@ -404,10 +427,10 @@ static ssize_t provision_cap_write(struct file *filp, struct kobject *kobj, static BIN_ATTR_WO(provision_cap, SDSI_SIZE_WRITE_MSG); static ssize_t -certificate_read(u64 command, struct sdsi_priv *priv, char *buf, loff_t off, - size_t count) +certificate_read(u64 command, u64 control_flags, struct sdsi_priv *priv, + char *buf, loff_t off, size_t count) { - struct sdsi_mbox_info info; + struct sdsi_mbox_info info = {}; size_t size; int ret; @@ -421,6 +444,7 @@ certificate_read(u64 command, struct sdsi_priv *priv, char *buf, loff_t off, info.payload = &command; info.size = sizeof(command); + info.control_flags = control_flags; ret = mutex_lock_interruptible(&priv->mb_lock); if (ret) @@ -452,7 +476,7 @@ state_certificate_read(struct file *filp, struct kobject *kobj, struct device *dev = kobj_to_dev(kobj); struct sdsi_priv *priv = dev_get_drvdata(dev); - return certificate_read(SDSI_CMD_READ_STATE, priv, buf, off, count); + return certificate_read(SDSI_CMD_READ_STATE, 0, priv, buf, off, count); } static BIN_ATTR_ADMIN_RO(state_certificate, SDSI_SIZE_READ_MSG); @@ -464,10 +488,23 @@ meter_certificate_read(struct file *filp, struct kobject *kobj, struct device *dev = kobj_to_dev(kobj); struct sdsi_priv *priv = dev_get_drvdata(dev); - return certificate_read(SDSI_CMD_READ_METER, priv, buf, off, count); + return certificate_read(SDSI_CMD_READ_METER, 0, priv, buf, off, count); } static BIN_ATTR_ADMIN_RO(meter_certificate, SDSI_SIZE_READ_MSG); +static ssize_t +meter_current_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, char *buf, loff_t off, + size_t count) +{ + struct device *dev = kobj_to_dev(kobj); + struct sdsi_priv *priv = dev_get_drvdata(dev); + + return certificate_read(SDSI_CMD_READ_METER, CTRL_METER_ENABLE_DRAM, + priv, buf, off, count); +} +static BIN_ATTR_ADMIN_RO(meter_current, SDSI_SIZE_READ_MSG); + static ssize_t registers_read(struct file *filp, struct kobject *kobj, struct bin_attribute *attr, char *buf, loff_t off, size_t count) @@ -498,6 +535,7 @@ static struct bin_attribute *sdsi_bin_attrs[] = { &bin_attr_registers, &bin_attr_state_certificate, &bin_attr_meter_certificate, + &bin_attr_meter_current, &bin_attr_provision_akc, &bin_attr_provision_cap, NULL @@ -517,7 +555,7 @@ sdsi_battr_is_visible(struct kobject *kobj, struct bin_attribute *attr, int n) if (!(priv->features & SDSI_FEATURE_SDSI)) return 0; - if (attr == &bin_attr_meter_certificate) + if (attr == &bin_attr_meter_certificate || attr == &bin_attr_meter_current) return (priv->features & SDSI_FEATURE_METERING) ? attr->attr.mode : 0; diff --git a/drivers/platform/x86/intel/smartconnect.c b/drivers/platform/x86/intel/smartconnect.c index 64c2dc9347..31019a1a6d 100644 --- a/drivers/platform/x86/intel/smartconnect.c +++ b/drivers/platform/x86/intel/smartconnect.c @@ -6,6 +6,7 @@ #include <linux/acpi.h> #include <linux/module.h> +MODULE_DESCRIPTION("Intel Smart Connect disabling driver"); MODULE_LICENSE("GPL"); static int smartconnect_acpi_init(struct acpi_device *acpi) @@ -32,7 +33,6 @@ static const struct acpi_device_id smartconnect_ids[] = { MODULE_DEVICE_TABLE(acpi, smartconnect_ids); static struct acpi_driver smartconnect_driver = { - .owner = THIS_MODULE, .name = "intel_smart_connect", .class = "intel_smart_connect", .ids = smartconnect_ids, diff --git a/drivers/platform/x86/intel/speed_select_if/isst_if_common.c b/drivers/platform/x86/intel/speed_select_if/isst_if_common.c index 1accdaaf28..713c0d1fa8 100644 --- a/drivers/platform/x86/intel/speed_select_if/isst_if_common.c +++ b/drivers/platform/x86/intel/speed_select_if/isst_if_common.c @@ -839,4 +839,5 @@ void isst_if_cdev_unregister(int device_type) } EXPORT_SYMBOL_GPL(isst_if_cdev_unregister); +MODULE_DESCRIPTION("ISST common interface module"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/platform/x86/intel/speed_select_if/isst_tpmi_core.c b/drivers/platform/x86/intel/speed_select_if/isst_tpmi_core.c index 1d918000d7..7fa360073f 100644 --- a/drivers/platform/x86/intel/speed_select_if/isst_tpmi_core.c +++ b/drivers/platform/x86/intel/speed_select_if/isst_tpmi_core.c @@ -17,12 +17,15 @@ * the hardware mapping. */ +#define dev_fmt(fmt) "tpmi_sst: " fmt + #include <linux/auxiliary_bus.h> #include <linux/delay.h> #include <linux/intel_tpmi.h> #include <linux/fs.h> #include <linux/io.h> #include <linux/kernel.h> +#include <linux/minmax.h> #include <linux/module.h> #include <uapi/linux/isst_if.h> @@ -263,20 +266,33 @@ struct tpmi_per_power_domain_info { bool write_blocked; }; +/* Supported maximum partitions */ +#define SST_MAX_PARTITIONS 2 + /** * struct tpmi_sst_struct - Store sst info for a package * @package_id: Package id for this aux device instance * @number_of_power_domains: Number of power_domains pointed by power_domain_info pointer * @power_domain_info: Pointer to power domains information + * @cdie_mask: Mask of compute dies present in a partition from hardware. + * This mask is not present in the version 1 information header. + * @io_dies: Number of IO dies in a partition. This will be 0 for TPMI + * version 1 information header. + * @partition_mask: Mask of all partitions. + * @partition_mask_current: Current partition mask as some may have been unbound. * * This structure is used store full SST information for a package. - * Each package has a unique OOB PCI device, which enumerates TPMI. - * Each Package will have multiple power_domains. + * Each package has one or multiple OOB PCI devices. Each package can contain multiple + * power domains. */ struct tpmi_sst_struct { int package_id; - int number_of_power_domains; - struct tpmi_per_power_domain_info *power_domain_info; + struct tpmi_per_power_domain_info *power_domain_info[SST_MAX_PARTITIONS]; + u16 cdie_mask[SST_MAX_PARTITIONS]; + u8 number_of_power_domains[SST_MAX_PARTITIONS]; + u8 io_dies[SST_MAX_PARTITIONS]; + u8 partition_mask; + u8 partition_mask_current; }; /** @@ -313,12 +329,11 @@ static int sst_add_perf_profiles(struct auxiliary_device *auxdev, struct tpmi_per_power_domain_info *pd_info, int levels) { + struct device *dev = &auxdev->dev; u64 perf_level_offsets; int i; - pd_info->perf_levels = devm_kcalloc(&auxdev->dev, levels, - sizeof(struct perf_level), - GFP_KERNEL); + pd_info->perf_levels = devm_kcalloc(dev, levels, sizeof(struct perf_level), GFP_KERNEL); if (!pd_info->perf_levels) return 0; @@ -349,6 +364,7 @@ static int sst_add_perf_profiles(struct auxiliary_device *auxdev, static int sst_main(struct auxiliary_device *auxdev, struct tpmi_per_power_domain_info *pd_info) { + struct device *dev = &auxdev->dev; int i, mask, levels; *((u64 *)&pd_info->sst_header) = readq(pd_info->sst_base); @@ -359,13 +375,13 @@ static int sst_main(struct auxiliary_device *auxdev, struct tpmi_per_power_domai return -ENODEV; if (TPMI_MAJOR_VERSION(pd_info->sst_header.interface_version) != ISST_MAJOR_VERSION) { - dev_err(&auxdev->dev, "SST: Unsupported major version:%lx\n", + dev_err(dev, "SST: Unsupported major version:%lx\n", TPMI_MAJOR_VERSION(pd_info->sst_header.interface_version)); return -ENODEV; } if (TPMI_MINOR_VERSION(pd_info->sst_header.interface_version) != ISST_MINOR_VERSION) - dev_info(&auxdev->dev, "SST: Ignore: Unsupported minor version:%lx\n", + dev_info(dev, "SST: Ignore: Unsupported minor version:%lx\n", TPMI_MINOR_VERSION(pd_info->sst_header.interface_version)); /* Read SST CP Header */ @@ -387,6 +403,126 @@ static int sst_main(struct auxiliary_device *auxdev, struct tpmi_per_power_domai return 0; } +static u8 isst_instance_count(struct tpmi_sst_struct *sst_inst) +{ + u8 i, max_part, count = 0; + + /* Partition mask starts from bit 0 and contains 1s only */ + max_part = hweight8(sst_inst->partition_mask); + for (i = 0; i < max_part; i++) + count += sst_inst->number_of_power_domains[i]; + + return count; +} + +/** + * map_cdies() - Map user domain ID to compute domain ID + * @sst_inst: TPMI Instance + * @id: User domain ID + * @partition: Resolved partition + * + * Helper function to map_partition_power_domain_id() to resolve compute + * domain ID and partition. Use hardware provided cdie_mask for a partition + * as is to resolve a compute domain ID. + * + * Return: %-EINVAL on error, otherwise mapped domain ID >= 0. + */ +static int map_cdies(struct tpmi_sst_struct *sst_inst, u8 id, u8 *partition) +{ + u8 i, max_part; + + max_part = hweight8(sst_inst->partition_mask); + for (i = 0; i < max_part; i++) { + if (!(sst_inst->cdie_mask[i] & BIT(id))) + continue; + + *partition = i; + return id - ffs(sst_inst->cdie_mask[i]) + 1; + } + + return -EINVAL; +} + +/** + * map_partition_power_domain_id() - Map user domain ID to partition domain ID + * @sst_inst: TPMI Instance + * @id: User domain ID + * @partition: Resolved partition + * + * In a partitioned system a CPU package has two separate MMIO ranges (Under + * two PCI devices). But the CPU package compute die/power domain IDs are + * unique in a package. User space can get compute die/power domain ID from + * CPUID and MSR 0x54 for a CPU. So, those IDs need to be preserved even if + * they are present in two different partitions with its own order. + * + * For example for command ISST_IF_COUNT_TPMI_INSTANCES, the valid_mask + * is 111111b for a 4 compute and 2 IO dies system. This is presented as + * provided by the hardware in a non-partitioned system with the following + * order: + * I1-I0-C3-C2-C1-C0 + * Here: "C": for compute and "I" for IO die. + * Compute dies are always present first in TPMI instances, as they have + * to map to the real power domain/die ID of a system. In a non-partitioned + * system there is no way to identify compute and IO die boundaries from + * this driver without reading each CPU's mapping. + * + * The same order needs to be preserved, even if those compute dies are + * distributed among multiple partitions. For example: + * Partition 1 can contain: I1-C1-C0 + * Partition 2 can contain: I2-C3-C2 + * + * This will require a conversion of user space IDs to the actual index into + * array of stored power domains for each partition. For the above example + * this function will return partition and index as follows: + * + * ============= ========= ===== ======== + * User space ID Partition Index Die type + * ============= ========= ===== ======== + * 0 0 0 Compute + * 1 0 1 Compute + * 2 1 0 Compute + * 3 1 1 Compute + * 4 0 2 IO + * 5 1 2 IO + * ============= ========= ===== ======== + * + * Return: %-EINVAL on error, otherwise mapped domain ID >= 0. + */ +static int map_partition_power_domain_id(struct tpmi_sst_struct *sst_inst, u8 id, u8 *partition) +{ + u8 i, io_start_id, max_part; + + *partition = 0; + + /* If any PCI device for partition is unbound, treat this as failure */ + if (sst_inst->partition_mask != sst_inst->partition_mask_current) + return -EINVAL; + + max_part = hweight8(sst_inst->partition_mask); + + /* IO Index begin here */ + io_start_id = fls(sst_inst->cdie_mask[max_part - 1]); + + if (id < io_start_id) + return map_cdies(sst_inst, id, partition); + + for (i = 0; i < max_part; i++) { + u8 io_id; + + io_id = id - io_start_id; + if (io_id < sst_inst->io_dies[i]) { + u8 cdie_range; + + cdie_range = fls(sst_inst->cdie_mask[i]) - ffs(sst_inst->cdie_mask[i]) + 1; + *partition = i; + return cdie_range + io_id; + } + io_start_id += sst_inst->io_dies[i]; + } + + return -EINVAL; +} + /* * Map a package and power_domain id to SST information structure unique for a power_domain. * The caller should call under isst_tpmi_dev_lock. @@ -395,19 +531,20 @@ static struct tpmi_per_power_domain_info *get_instance(int pkg_id, int power_dom { struct tpmi_per_power_domain_info *power_domain_info; struct tpmi_sst_struct *sst_inst; + u8 part; - if (pkg_id < 0 || pkg_id > isst_common.max_index || - pkg_id >= topology_max_packages()) + if (!in_range(pkg_id, 0, topology_max_packages()) || pkg_id > isst_common.max_index) return NULL; sst_inst = isst_common.sst_inst[pkg_id]; if (!sst_inst) return NULL; - if (power_domain_id < 0 || power_domain_id >= sst_inst->number_of_power_domains) + power_domain_id = map_partition_power_domain_id(sst_inst, power_domain_id, &part); + if (power_domain_id < 0) return NULL; - power_domain_info = &sst_inst->power_domain_info[power_domain_id]; + power_domain_info = &sst_inst->power_domain_info[part][power_domain_id]; if (power_domain_info && !power_domain_info->sst_base) return NULL; @@ -579,6 +716,7 @@ static long isst_if_clos_assoc(void __user *argp) struct tpmi_sst_struct *sst_inst; int offset, shift, cpu; u64 val, mask, clos; + u8 part; if (copy_from_user(&clos_assoc, ptr, sizeof(clos_assoc))) return -EFAULT; @@ -602,10 +740,11 @@ static long isst_if_clos_assoc(void __user *argp) sst_inst = isst_common.sst_inst[pkg_id]; - if (clos_assoc.power_domain_id > sst_inst->number_of_power_domains) + punit_id = map_partition_power_domain_id(sst_inst, punit_id, &part); + if (punit_id < 0) return -EINVAL; - power_domain_info = &sst_inst->power_domain_info[punit_id]; + power_domain_info = &sst_inst->power_domain_info[part][punit_id]; if (assoc_cmds.get_set && power_domain_info->write_blocked) return -EPERM; @@ -708,6 +847,8 @@ static int isst_if_get_perf_level(void __user *argp) { struct isst_perf_level_info perf_level; struct tpmi_per_power_domain_info *power_domain_info; + unsigned long level_mask; + u8 level, support; if (copy_from_user(&perf_level, argp, sizeof(perf_level))) return -EFAULT; @@ -727,12 +868,34 @@ static int isst_if_get_perf_level(void __user *argp) SST_PP_FEATURE_STATE_START, SST_PP_FEATURE_STATE_WIDTH, SST_MUL_FACTOR_NONE) perf_level.enabled = !!(power_domain_info->sst_header.cap_mask & BIT(1)); - _read_bf_level_info("bf_support", perf_level.sst_bf_support, 0, 0, - SST_BF_FEATURE_SUPPORTED_START, SST_BF_FEATURE_SUPPORTED_WIDTH, - SST_MUL_FACTOR_NONE); - _read_tf_level_info("tf_support", perf_level.sst_tf_support, 0, 0, - SST_TF_FEATURE_SUPPORTED_START, SST_TF_FEATURE_SUPPORTED_WIDTH, - SST_MUL_FACTOR_NONE); + level_mask = perf_level.level_mask; + perf_level.sst_bf_support = 0; + for_each_set_bit(level, &level_mask, BITS_PER_BYTE) { + /* + * Read BF support for a level. Read output is updated + * to "support" variable by the below macro. + */ + _read_bf_level_info("bf_support", support, level, 0, SST_BF_FEATURE_SUPPORTED_START, + SST_BF_FEATURE_SUPPORTED_WIDTH, SST_MUL_FACTOR_NONE); + + /* If supported set the bit for the level */ + if (support) + perf_level.sst_bf_support |= BIT(level); + } + + perf_level.sst_tf_support = 0; + for_each_set_bit(level, &level_mask, BITS_PER_BYTE) { + /* + * Read TF support for a level. Read output is updated + * to "support" variable by the below macro. + */ + _read_tf_level_info("tf_support", support, level, 0, SST_TF_FEATURE_SUPPORTED_START, + SST_TF_FEATURE_SUPPORTED_WIDTH, SST_MUL_FACTOR_NONE); + + /* If supported set the bit for the level */ + if (support) + perf_level.sst_tf_support |= BIT(level); + } if (copy_to_user(argp, &perf_level, sizeof(perf_level))) return -EFAULT; @@ -1134,18 +1297,28 @@ static int isst_if_get_tpmi_instance_count(void __user *argp) if (tpmi_inst.socket_id >= topology_max_packages()) return -EINVAL; - tpmi_inst.count = isst_common.sst_inst[tpmi_inst.socket_id]->number_of_power_domains; - sst_inst = isst_common.sst_inst[tpmi_inst.socket_id]; + + tpmi_inst.count = isst_instance_count(sst_inst); + tpmi_inst.valid_mask = 0; - for (i = 0; i < sst_inst->number_of_power_domains; ++i) { + for (i = 0; i < tpmi_inst.count; i++) { struct tpmi_per_power_domain_info *pd_info; + u8 part; + int pd; - pd_info = &sst_inst->power_domain_info[i]; + pd = map_partition_power_domain_id(sst_inst, i, &part); + if (pd < 0) + continue; + + pd_info = &sst_inst->power_domain_info[part][pd]; if (pd_info->sst_base) tpmi_inst.valid_mask |= BIT(i); } + if (!tpmi_inst.valid_mask) + tpmi_inst.count = 0; + if (copy_to_user(argp, &tpmi_inst, sizeof(tpmi_inst))) return -EFAULT; @@ -1271,102 +1444,175 @@ static long isst_if_def_ioctl(struct file *file, unsigned int cmd, int tpmi_sst_dev_add(struct auxiliary_device *auxdev) { + struct tpmi_per_power_domain_info *pd_info; bool read_blocked = 0, write_blocked = 0; struct intel_tpmi_plat_info *plat_info; + struct device *dev = &auxdev->dev; struct tpmi_sst_struct *tpmi_sst; - int i, ret, pkg = 0, inst = 0; - int num_resources; + u8 i, num_resources, io_die_cnt; + int ret, pkg = 0, inst = 0; + bool first_enum = false; + u16 cdie_mask; + u8 partition; ret = tpmi_get_feature_status(auxdev, TPMI_ID_SST, &read_blocked, &write_blocked); if (ret) - dev_info(&auxdev->dev, "Can't read feature status: ignoring read/write blocked status\n"); + dev_info(dev, "Can't read feature status: ignoring read/write blocked status\n"); if (read_blocked) { - dev_info(&auxdev->dev, "Firmware has blocked reads, exiting\n"); + dev_info(dev, "Firmware has blocked reads, exiting\n"); return -ENODEV; } plat_info = tpmi_get_platform_data(auxdev); if (!plat_info) { - dev_err(&auxdev->dev, "No platform info\n"); + dev_err(dev, "No platform info\n"); return -EINVAL; } pkg = plat_info->package_id; if (pkg >= topology_max_packages()) { - dev_err(&auxdev->dev, "Invalid package id :%x\n", pkg); + dev_err(dev, "Invalid package id :%x\n", pkg); return -EINVAL; } - if (isst_common.sst_inst[pkg]) - return -EEXIST; + partition = plat_info->partition; + if (partition >= SST_MAX_PARTITIONS) { + dev_err(&auxdev->dev, "Invalid partition :%x\n", partition); + return -EINVAL; + } num_resources = tpmi_get_resource_count(auxdev); if (!num_resources) return -EINVAL; - tpmi_sst = devm_kzalloc(&auxdev->dev, sizeof(*tpmi_sst), GFP_KERNEL); - if (!tpmi_sst) - return -ENOMEM; + mutex_lock(&isst_tpmi_dev_lock); + + if (isst_common.sst_inst[pkg]) { + tpmi_sst = isst_common.sst_inst[pkg]; + } else { + /* + * tpmi_sst instance is for a package. So needs to be + * allocated only once for both partitions. We can't use + * devm_* allocation here as each partition is a + * different device, which can be unbound. + */ + tpmi_sst = kzalloc(sizeof(*tpmi_sst), GFP_KERNEL); + if (!tpmi_sst) { + ret = -ENOMEM; + goto unlock_exit; + } + first_enum = true; + } - tpmi_sst->power_domain_info = devm_kcalloc(&auxdev->dev, num_resources, - sizeof(*tpmi_sst->power_domain_info), - GFP_KERNEL); - if (!tpmi_sst->power_domain_info) - return -ENOMEM; + ret = 0; - tpmi_sst->number_of_power_domains = num_resources; + pd_info = devm_kcalloc(dev, num_resources, sizeof(*pd_info), GFP_KERNEL); + if (!pd_info) { + ret = -ENOMEM; + goto unlock_free; + } + + /* Get the IO die count, if cdie_mask is present */ + if (plat_info->cdie_mask) { + u8 cdie_range; + + cdie_mask = plat_info->cdie_mask; + cdie_range = fls(cdie_mask) - ffs(cdie_mask) + 1; + io_die_cnt = num_resources - cdie_range; + } else { + /* + * This is a synthetic mask, careful when assuming that + * they are compute dies only. + */ + cdie_mask = (1 << num_resources) - 1; + io_die_cnt = 0; + } for (i = 0; i < num_resources; ++i) { struct resource *res; res = tpmi_get_resource_at_index(auxdev, i); if (!res) { - tpmi_sst->power_domain_info[i].sst_base = NULL; + pd_info[i].sst_base = NULL; continue; } - tpmi_sst->power_domain_info[i].package_id = pkg; - tpmi_sst->power_domain_info[i].power_domain_id = i; - tpmi_sst->power_domain_info[i].auxdev = auxdev; - tpmi_sst->power_domain_info[i].write_blocked = write_blocked; - tpmi_sst->power_domain_info[i].sst_base = devm_ioremap_resource(&auxdev->dev, res); - if (IS_ERR(tpmi_sst->power_domain_info[i].sst_base)) - return PTR_ERR(tpmi_sst->power_domain_info[i].sst_base); + pd_info[i].package_id = pkg; + pd_info[i].power_domain_id = i; + pd_info[i].auxdev = auxdev; + pd_info[i].write_blocked = write_blocked; + pd_info[i].sst_base = devm_ioremap_resource(dev, res); + if (IS_ERR(pd_info[i].sst_base)) { + ret = PTR_ERR(pd_info[i].sst_base); + goto unlock_free; + } - ret = sst_main(auxdev, &tpmi_sst->power_domain_info[i]); + ret = sst_main(auxdev, &pd_info[i]); if (ret) { - devm_iounmap(&auxdev->dev, tpmi_sst->power_domain_info[i].sst_base); - tpmi_sst->power_domain_info[i].sst_base = NULL; + /* + * This entry is not valid, hardware can partially + * populate dies. In this case MMIO will have 0xFFs. + * Also possible some pre-production hardware has + * invalid data. But don't fail and continue to use + * other dies with valid data. + */ + devm_iounmap(dev, pd_info[i].sst_base); + pd_info[i].sst_base = NULL; continue; } ++inst; } - if (!inst) - return -ENODEV; + if (!inst) { + ret = -ENODEV; + goto unlock_free; + } tpmi_sst->package_id = pkg; + + tpmi_sst->power_domain_info[partition] = pd_info; + tpmi_sst->number_of_power_domains[partition] = num_resources; + tpmi_sst->cdie_mask[partition] = cdie_mask; + tpmi_sst->io_dies[partition] = io_die_cnt; + tpmi_sst->partition_mask |= BIT(partition); + tpmi_sst->partition_mask_current |= BIT(partition); + auxiliary_set_drvdata(auxdev, tpmi_sst); - mutex_lock(&isst_tpmi_dev_lock); if (isst_common.max_index < pkg) isst_common.max_index = pkg; isst_common.sst_inst[pkg] = tpmi_sst; + +unlock_free: + if (ret && first_enum) + kfree(tpmi_sst); +unlock_exit: mutex_unlock(&isst_tpmi_dev_lock); - return 0; + return ret; } EXPORT_SYMBOL_NS_GPL(tpmi_sst_dev_add, INTEL_TPMI_SST); void tpmi_sst_dev_remove(struct auxiliary_device *auxdev) { struct tpmi_sst_struct *tpmi_sst = auxiliary_get_drvdata(auxdev); + struct intel_tpmi_plat_info *plat_info; + + plat_info = tpmi_get_platform_data(auxdev); + if (!plat_info) + return; mutex_lock(&isst_tpmi_dev_lock); - isst_common.sst_inst[tpmi_sst->package_id] = NULL; + tpmi_sst->power_domain_info[plat_info->partition] = NULL; + tpmi_sst->partition_mask_current &= ~BIT(plat_info->partition); + /* Free the package instance when the all partitions are removed */ + if (!tpmi_sst->partition_mask_current) { + isst_common.sst_inst[tpmi_sst->package_id] = NULL; + kfree(tpmi_sst); + } mutex_unlock(&isst_tpmi_dev_lock); } EXPORT_SYMBOL_NS_GPL(tpmi_sst_dev_remove, INTEL_TPMI_SST); @@ -1374,9 +1620,16 @@ EXPORT_SYMBOL_NS_GPL(tpmi_sst_dev_remove, INTEL_TPMI_SST); void tpmi_sst_dev_suspend(struct auxiliary_device *auxdev) { struct tpmi_sst_struct *tpmi_sst = auxiliary_get_drvdata(auxdev); - struct tpmi_per_power_domain_info *power_domain_info = tpmi_sst->power_domain_info; + struct tpmi_per_power_domain_info *power_domain_info; + struct intel_tpmi_plat_info *plat_info; void __iomem *cp_base; + plat_info = tpmi_get_platform_data(auxdev); + if (!plat_info) + return; + + power_domain_info = tpmi_sst->power_domain_info[plat_info->partition]; + cp_base = power_domain_info->sst_base + power_domain_info->sst_header.cp_offset; power_domain_info->saved_sst_cp_control = readq(cp_base + SST_CP_CONTROL_OFFSET); @@ -1395,9 +1648,16 @@ EXPORT_SYMBOL_NS_GPL(tpmi_sst_dev_suspend, INTEL_TPMI_SST); void tpmi_sst_dev_resume(struct auxiliary_device *auxdev) { struct tpmi_sst_struct *tpmi_sst = auxiliary_get_drvdata(auxdev); - struct tpmi_per_power_domain_info *power_domain_info = tpmi_sst->power_domain_info; + struct tpmi_per_power_domain_info *power_domain_info; + struct intel_tpmi_plat_info *plat_info; void __iomem *cp_base; + plat_info = tpmi_get_platform_data(auxdev); + if (!plat_info) + return; + + power_domain_info = tpmi_sst->power_domain_info[plat_info->partition]; + cp_base = power_domain_info->sst_base + power_domain_info->sst_header.cp_offset; writeq(power_domain_info->saved_sst_cp_control, cp_base + SST_CP_CONTROL_OFFSET); @@ -1412,7 +1672,7 @@ void tpmi_sst_dev_resume(struct auxiliary_device *auxdev) } EXPORT_SYMBOL_NS_GPL(tpmi_sst_dev_resume, INTEL_TPMI_SST); -#define ISST_TPMI_API_VERSION 0x02 +#define ISST_TPMI_API_VERSION 0x03 int tpmi_sst_init(void) { @@ -1469,4 +1729,5 @@ EXPORT_SYMBOL_NS_GPL(tpmi_sst_exit, INTEL_TPMI_SST); MODULE_IMPORT_NS(INTEL_TPMI); MODULE_IMPORT_NS(INTEL_TPMI_POWER_DOMAIN); +MODULE_DESCRIPTION("ISST TPMI interface module"); MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/intel/tpmi.c b/drivers/platform/x86/intel/tpmi.c index 003e765ded..6c0cbccd80 100644 --- a/drivers/platform/x86/intel/tpmi.c +++ b/drivers/platform/x86/intel/tpmi.c @@ -128,6 +128,9 @@ struct intel_tpmi_info { * @dev: PCI device number * @bus: PCI bus number * @pkg: CPU Package id + * @segment: PCI segment id + * @partition: Package Partition id + * @cdie_mask: Bitmap of compute dies in the current partition * @reserved: Reserved for future use * @lock: When set to 1 the register is locked and becomes read-only * until next reset. Not for use by the OS driver. @@ -139,7 +142,10 @@ struct tpmi_info_header { u64 dev:5; u64 bus:8; u64 pkg:8; - u64 reserved:39; + u64 segment:8; + u64 partition:2; + u64 cdie_mask:16; + u64 reserved:13; u64 lock:1; } __packed; @@ -666,28 +672,44 @@ static int tpmi_create_devices(struct intel_tpmi_info *tpmi_info) } #define TPMI_INFO_BUS_INFO_OFFSET 0x08 +#define TPMI_INFO_MAJOR_VERSION 0x00 +#define TPMI_INFO_MINOR_VERSION 0x02 static int tpmi_process_info(struct intel_tpmi_info *tpmi_info, struct intel_tpmi_pm_feature *pfs) { struct tpmi_info_header header; void __iomem *info_mem; + u64 feature_header; + int ret = 0; - info_mem = ioremap(pfs->vsec_offset + TPMI_INFO_BUS_INFO_OFFSET, - pfs->pfs_header.entry_size * sizeof(u32) - TPMI_INFO_BUS_INFO_OFFSET); + info_mem = ioremap(pfs->vsec_offset, pfs->pfs_header.entry_size * sizeof(u32)); if (!info_mem) return -ENOMEM; - memcpy_fromio(&header, info_mem, sizeof(header)); + feature_header = readq(info_mem); + if (TPMI_MAJOR_VERSION(feature_header) != TPMI_INFO_MAJOR_VERSION) { + ret = -ENODEV; + goto error_info_header; + } + + memcpy_fromio(&header, info_mem + TPMI_INFO_BUS_INFO_OFFSET, sizeof(header)); tpmi_info->plat_info.package_id = header.pkg; tpmi_info->plat_info.bus_number = header.bus; tpmi_info->plat_info.device_number = header.dev; tpmi_info->plat_info.function_number = header.fn; + if (TPMI_MINOR_VERSION(feature_header) >= TPMI_INFO_MINOR_VERSION) { + tpmi_info->plat_info.cdie_mask = header.cdie_mask; + tpmi_info->plat_info.partition = header.partition; + tpmi_info->plat_info.segment = header.segment; + } + +error_info_header: iounmap(info_mem); - return 0; + return ret; } static int tpmi_fetch_pfs_header(struct intel_tpmi_pm_feature *pfs, u64 start, int size) diff --git a/drivers/platform/x86/intel/vbtn.c b/drivers/platform/x86/intel/vbtn.c index 79bb2c801d..9b7ce03ba0 100644 --- a/drivers/platform/x86/intel/vbtn.c +++ b/drivers/platform/x86/intel/vbtn.c @@ -24,6 +24,7 @@ #define VGBS_TABLET_MODE_FLAGS (VGBS_TABLET_MODE_FLAG | VGBS_TABLET_MODE_FLAG_ALT) +MODULE_DESCRIPTION("Intel Virtual Button driver"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("AceLan Kao"); @@ -156,7 +157,8 @@ static void notify_handler(acpi_handle handle, u32 event, void *context) if ((ke = sparse_keymap_entry_from_scancode(priv->buttons_dev, event))) { if (!priv->has_buttons) { - dev_warn(&device->dev, "Warning: received a button event on a device without buttons, please report this.\n"); + dev_warn(&device->dev, "Warning: received 0x%02x button event on a device without buttons, please report this.\n", + event); return; } input_dev = priv->buttons_dev; diff --git a/drivers/platform/x86/intel_ips.c b/drivers/platform/x86/intel_ips.c index ba38649cc1..73ec4460a1 100644 --- a/drivers/platform/x86/intel_ips.c +++ b/drivers/platform/x86/intel_ips.c @@ -1505,7 +1505,7 @@ static int ips_probe(struct pci_dev *dev, const struct pci_device_id *id) * IRQ handler for ME interaction * Note: don't use MSI here as the PCH has bugs. */ - ret = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY); + ret = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_INTX); if (ret < 0) return ret; diff --git a/drivers/platform/x86/lenovo-wmi-camera.c b/drivers/platform/x86/lenovo-wmi-camera.c new file mode 100644 index 0000000000..0c0bedaf74 --- /dev/null +++ b/drivers/platform/x86/lenovo-wmi-camera.c @@ -0,0 +1,127 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Lenovo WMI Camera Button Driver + * + * Author: Ai Chao <aichao@kylinos.cn> + * Copyright (C) 2024 KylinSoft Corporation. + */ + +#include <linux/acpi.h> +#include <linux/device.h> +#include <linux/input.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/wmi.h> + +#define WMI_LENOVO_CAMERABUTTON_EVENT_GUID "50C76F1F-D8E4-D895-0A3D-62F4EA400013" + +struct lenovo_wmi_priv { + struct input_dev *idev; + struct mutex notify_lock; /* lenovo WMI camera button notify lock */ +}; + +enum { + SW_CAMERA_OFF = 0, + SW_CAMERA_ON = 1, +}; + +static void lenovo_wmi_notify(struct wmi_device *wdev, union acpi_object *obj) +{ + struct lenovo_wmi_priv *priv = dev_get_drvdata(&wdev->dev); + unsigned int keycode; + u8 camera_mode; + + if (obj->type != ACPI_TYPE_BUFFER) { + dev_err(&wdev->dev, "Bad response type %u\n", obj->type); + return; + } + + if (obj->buffer.length != 1) { + dev_err(&wdev->dev, "Invalid buffer length %u\n", obj->buffer.length); + return; + } + + /* + * obj->buffer.pointer[0] is camera mode: + * 0 camera close + * 1 camera open + */ + camera_mode = obj->buffer.pointer[0]; + if (camera_mode > SW_CAMERA_ON) { + dev_err(&wdev->dev, "Unknown camera mode %u\n", camera_mode); + return; + } + + mutex_lock(&priv->notify_lock); + + keycode = camera_mode == SW_CAMERA_ON ? + KEY_CAMERA_ACCESS_ENABLE : KEY_CAMERA_ACCESS_DISABLE; + input_report_key(priv->idev, keycode, 1); + input_sync(priv->idev); + input_report_key(priv->idev, keycode, 0); + input_sync(priv->idev); + + mutex_unlock(&priv->notify_lock); +} + +static int lenovo_wmi_probe(struct wmi_device *wdev, const void *context) +{ + struct lenovo_wmi_priv *priv; + int ret; + + priv = devm_kzalloc(&wdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + dev_set_drvdata(&wdev->dev, priv); + + priv->idev = devm_input_allocate_device(&wdev->dev); + if (!priv->idev) + return -ENOMEM; + + priv->idev->name = "Lenovo WMI Camera Button"; + priv->idev->phys = "wmi/input0"; + priv->idev->id.bustype = BUS_HOST; + priv->idev->dev.parent = &wdev->dev; + input_set_capability(priv->idev, EV_KEY, KEY_CAMERA_ACCESS_ENABLE); + input_set_capability(priv->idev, EV_KEY, KEY_CAMERA_ACCESS_DISABLE); + + ret = input_register_device(priv->idev); + if (ret) + return ret; + + mutex_init(&priv->notify_lock); + + return 0; +} + +static void lenovo_wmi_remove(struct wmi_device *wdev) +{ + struct lenovo_wmi_priv *priv = dev_get_drvdata(&wdev->dev); + + mutex_destroy(&priv->notify_lock); +} + +static const struct wmi_device_id lenovo_wmi_id_table[] = { + { .guid_string = WMI_LENOVO_CAMERABUTTON_EVENT_GUID }, + { } +}; +MODULE_DEVICE_TABLE(wmi, lenovo_wmi_id_table); + +static struct wmi_driver lenovo_wmi_driver = { + .driver = { + .name = "lenovo-wmi-camera", + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + }, + .id_table = lenovo_wmi_id_table, + .no_singleton = true, + .probe = lenovo_wmi_probe, + .notify = lenovo_wmi_notify, + .remove = lenovo_wmi_remove, +}; +module_wmi_driver(lenovo_wmi_driver); + +MODULE_AUTHOR("Ai Chao <aichao@kylinos.cn>"); +MODULE_DESCRIPTION("Lenovo WMI Camera Button Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/lenovo-yoga-tab2-pro-1380-fastcharger.c b/drivers/platform/x86/lenovo-yoga-tab2-pro-1380-fastcharger.c new file mode 100644 index 0000000000..d525bdc8ca --- /dev/null +++ b/drivers/platform/x86/lenovo-yoga-tab2-pro-1380-fastcharger.c @@ -0,0 +1,338 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Support for the custom fast charging protocol found on the Lenovo Yoga + * Tablet 2 1380F / 1380L models. + * + * Copyright (C) 2024 Hans de Goede <hansg@kernel.org> + */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/extcon.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/notifier.h> +#include <linux/pinctrl/consumer.h> +#include <linux/pinctrl/machine.h> +#include <linux/platform_device.h> +#include <linux/serdev.h> +#include <linux/time.h> +#include <linux/types.h> +#include <linux/workqueue.h> +#include "serdev_helpers.h" + +#define YT2_1380_FC_PDEV_NAME "lenovo-yoga-tab2-pro-1380-fastcharger" +#define YT2_1380_FC_SERDEV_CTRL "serial0" +#define YT2_1380_FC_SERDEV_NAME "serial0-0" +#define YT2_1380_FC_EXTCON_NAME "i2c-lc824206xa" + +#define YT2_1380_FC_MAX_TRIES 5 +#define YT2_1380_FC_PIN_SW_DELAY_US (10 * USEC_PER_MSEC) +#define YT2_1380_FC_UART_DRAIN_DELAY_US (50 * USEC_PER_MSEC) +#define YT2_1380_FC_VOLT_SW_DELAY_US (1000 * USEC_PER_MSEC) + +struct yt2_1380_fc { + struct device *dev; + struct pinctrl *pinctrl; + struct pinctrl_state *gpio_state; + struct pinctrl_state *uart_state; + struct gpio_desc *uart3_txd; + struct gpio_desc *uart3_rxd; + struct extcon_dev *extcon; + struct notifier_block nb; + struct work_struct work; + bool fast_charging; +}; + +static int yt2_1380_fc_set_gpio_mode(struct yt2_1380_fc *fc, bool enable) +{ + struct pinctrl_state *state = enable ? fc->gpio_state : fc->uart_state; + int ret; + + ret = pinctrl_select_state(fc->pinctrl, state); + if (ret) { + dev_err(fc->dev, "Error %d setting pinctrl state\n", ret); + return ret; + } + + fsleep(YT2_1380_FC_PIN_SW_DELAY_US); + return 0; +} + +static bool yt2_1380_fc_dedicated_charger_connected(struct yt2_1380_fc *fc) +{ + return extcon_get_state(fc->extcon, EXTCON_CHG_USB_DCP) > 0; +} + +static bool yt2_1380_fc_fast_charger_connected(struct yt2_1380_fc *fc) +{ + return extcon_get_state(fc->extcon, EXTCON_CHG_USB_FAST) > 0; +} + +static void yt2_1380_fc_worker(struct work_struct *work) +{ + struct yt2_1380_fc *fc = container_of(work, struct yt2_1380_fc, work); + int i, ret; + + /* Do nothing if already fast charging */ + if (yt2_1380_fc_fast_charger_connected(fc)) + return; + + for (i = 0; i < YT2_1380_FC_MAX_TRIES; i++) { + /* Set pins to UART mode (for charger disconnect and retries) */ + ret = yt2_1380_fc_set_gpio_mode(fc, false); + if (ret) + return; + + /* Only try 12V charging if a dedicated charger is detected */ + if (!yt2_1380_fc_dedicated_charger_connected(fc)) + return; + + /* Send the command to switch to 12V charging */ + ret = serdev_device_write_buf(to_serdev_device(fc->dev), "SC", strlen("SC")); + if (ret != strlen("SC")) { + dev_err(fc->dev, "Error %d writing to uart\n", ret); + return; + } + + fsleep(YT2_1380_FC_UART_DRAIN_DELAY_US); + + /* Re-check a charger is still connected */ + if (!yt2_1380_fc_dedicated_charger_connected(fc)) + return; + + /* + * Now switch the lines to GPIO (output, high). The charger + * expects the lines being driven high after the command. + * Presumably this is used to detect the tablet getting + * unplugged (to switch back to 5V output on unplug). + */ + ret = yt2_1380_fc_set_gpio_mode(fc, true); + if (ret) + return; + + fsleep(YT2_1380_FC_VOLT_SW_DELAY_US); + + if (yt2_1380_fc_fast_charger_connected(fc)) + return; /* Success */ + } + + dev_dbg(fc->dev, "Failed to switch to 12V charging (not the original charger?)\n"); + /* Failed to enable 12V fast charging, reset pins to default UART mode */ + yt2_1380_fc_set_gpio_mode(fc, false); +} + +static int yt2_1380_fc_extcon_evt(struct notifier_block *nb, + unsigned long event, void *param) +{ + struct yt2_1380_fc *fc = container_of(nb, struct yt2_1380_fc, nb); + + schedule_work(&fc->work); + return NOTIFY_OK; +} + +static size_t yt2_1380_fc_receive(struct serdev_device *serdev, const u8 *data, size_t len) +{ + /* + * Since the USB data lines are shorted for DCP detection, echos of + * the "SC" command send in yt2_1380_fc_worker() will be received. + */ + dev_dbg(&serdev->dev, "recv: %*ph\n", (int)len, data); + return len; +} + +static const struct serdev_device_ops yt2_1380_fc_serdev_ops = { + .receive_buf = yt2_1380_fc_receive, + .write_wakeup = serdev_device_write_wakeup, +}; + +static int yt2_1380_fc_serdev_probe(struct serdev_device *serdev) +{ + struct device *dev = &serdev->dev; + struct yt2_1380_fc *fc; + int ret; + + fc = devm_kzalloc(dev, sizeof(*fc), GFP_KERNEL); + if (!fc) + return -ENOMEM; + + fc->dev = dev; + fc->nb.notifier_call = yt2_1380_fc_extcon_evt; + INIT_WORK(&fc->work, yt2_1380_fc_worker); + + /* + * Do this first since it may return -EPROBE_DEFER. + * There is no extcon_put(), so there is no need to free this. + */ + fc->extcon = extcon_get_extcon_dev(YT2_1380_FC_EXTCON_NAME); + if (IS_ERR(fc->extcon)) + return dev_err_probe(dev, PTR_ERR(fc->extcon), "getting extcon\n"); + + fc->pinctrl = devm_pinctrl_get(dev); + if (IS_ERR(fc->pinctrl)) + return dev_err_probe(dev, PTR_ERR(fc->pinctrl), "getting pinctrl\n"); + + /* + * To switch the UART3 pins connected to the USB data lines between + * UART and GPIO modes. + */ + fc->gpio_state = pinctrl_lookup_state(fc->pinctrl, "uart3_gpio"); + fc->uart_state = pinctrl_lookup_state(fc->pinctrl, "uart3_uart"); + if (IS_ERR(fc->gpio_state) || IS_ERR(fc->uart_state)) + return dev_err_probe(dev, -EINVAL, "getting pinctrl states\n"); + + ret = yt2_1380_fc_set_gpio_mode(fc, true); + if (ret) + return ret; + + fc->uart3_txd = devm_gpiod_get(dev, "uart3_txd", GPIOD_OUT_HIGH); + if (IS_ERR(fc->uart3_txd)) + return dev_err_probe(dev, PTR_ERR(fc->uart3_txd), "getting uart3_txd gpio\n"); + + fc->uart3_rxd = devm_gpiod_get(dev, "uart3_rxd", GPIOD_OUT_HIGH); + if (IS_ERR(fc->uart3_rxd)) + return dev_err_probe(dev, PTR_ERR(fc->uart3_rxd), "getting uart3_rxd gpio\n"); + + ret = yt2_1380_fc_set_gpio_mode(fc, false); + if (ret) + return ret; + + ret = devm_serdev_device_open(dev, serdev); + if (ret) + return dev_err_probe(dev, ret, "opening UART device\n"); + + serdev_device_set_baudrate(serdev, 600); + serdev_device_set_flow_control(serdev, false); + serdev_device_set_drvdata(serdev, fc); + serdev_device_set_client_ops(serdev, &yt2_1380_fc_serdev_ops); + + ret = devm_extcon_register_notifier_all(dev, fc->extcon, &fc->nb); + if (ret) + return dev_err_probe(dev, ret, "registering extcon notifier\n"); + + /* In case the extcon already has detected a DCP charger */ + schedule_work(&fc->work); + + return 0; +} + +struct serdev_device_driver yt2_1380_fc_serdev_driver = { + .probe = yt2_1380_fc_serdev_probe, + .driver = { + .name = KBUILD_MODNAME, + }, +}; + +static const struct pinctrl_map yt2_1380_fc_pinctrl_map[] = { + PIN_MAP_MUX_GROUP(YT2_1380_FC_SERDEV_NAME, "uart3_uart", + "INT33FC:00", "uart3_grp", "uart"), + PIN_MAP_MUX_GROUP(YT2_1380_FC_SERDEV_NAME, "uart3_gpio", + "INT33FC:00", "uart3_grp_gpio", "gpio"), +}; + +static int yt2_1380_fc_pdev_probe(struct platform_device *pdev) +{ + struct serdev_device *serdev; + struct device *ctrl_dev; + int ret; + + /* Register pinctrl mappings for setting the UART3 pins mode */ + ret = pinctrl_register_mappings(yt2_1380_fc_pinctrl_map, + ARRAY_SIZE(yt2_1380_fc_pinctrl_map)); + if (ret) + return ret; + + /* And create the serdev to talk to the charger over the UART3 pins */ + ctrl_dev = get_serdev_controller("PNP0501", "1", 0, YT2_1380_FC_SERDEV_CTRL); + if (IS_ERR(ctrl_dev)) { + ret = PTR_ERR(ctrl_dev); + goto out_pinctrl_unregister_mappings; + } + + serdev = serdev_device_alloc(to_serdev_controller(ctrl_dev)); + put_device(ctrl_dev); + if (!serdev) { + ret = -ENOMEM; + goto out_pinctrl_unregister_mappings; + } + + ret = serdev_device_add(serdev); + if (ret) { + dev_err_probe(&pdev->dev, ret, "adding serdev\n"); + serdev_device_put(serdev); + goto out_pinctrl_unregister_mappings; + } + + /* + * serdev device <-> driver matching relies on OF or ACPI matches and + * neither is available here, manually bind the driver. + */ + ret = device_driver_attach(&yt2_1380_fc_serdev_driver.driver, &serdev->dev); + if (ret) { + /* device_driver_attach() maps EPROBE_DEFER to EAGAIN, map it back */ + ret = (ret == -EAGAIN) ? -EPROBE_DEFER : ret; + dev_err_probe(&pdev->dev, ret, "attaching serdev driver\n"); + goto out_serdev_device_remove; + } + + /* So that yt2_1380_fc_pdev_remove() can remove the serdev */ + platform_set_drvdata(pdev, serdev); + return 0; + +out_serdev_device_remove: + serdev_device_remove(serdev); +out_pinctrl_unregister_mappings: + pinctrl_unregister_mappings(yt2_1380_fc_pinctrl_map); + return ret; +} + +static void yt2_1380_fc_pdev_remove(struct platform_device *pdev) +{ + struct serdev_device *serdev = platform_get_drvdata(pdev); + + serdev_device_remove(serdev); + pinctrl_unregister_mappings(yt2_1380_fc_pinctrl_map); +} + +static struct platform_driver yt2_1380_fc_pdev_driver = { + .probe = yt2_1380_fc_pdev_probe, + .remove_new = yt2_1380_fc_pdev_remove, + .driver = { + .name = YT2_1380_FC_PDEV_NAME, + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + }, +}; + +static int __init yt2_1380_fc_module_init(void) +{ + int ret; + + /* + * serdev driver MUST be registered first because pdev driver calls + * device_driver_attach() on the serdev, serdev-driver pair. + */ + ret = serdev_device_driver_register(&yt2_1380_fc_serdev_driver); + if (ret) + return ret; + + ret = platform_driver_register(&yt2_1380_fc_pdev_driver); + if (ret) + serdev_device_driver_unregister(&yt2_1380_fc_serdev_driver); + + return ret; +} +module_init(yt2_1380_fc_module_init); + +static void __exit yt2_1380_fc_module_exit(void) +{ + platform_driver_unregister(&yt2_1380_fc_pdev_driver); + serdev_device_driver_unregister(&yt2_1380_fc_serdev_driver); +} +module_exit(yt2_1380_fc_module_exit); + +MODULE_ALIAS("platform:" YT2_1380_FC_PDEV_NAME); +MODULE_DESCRIPTION("Lenovo Yoga Tablet 2 1380 fast charge driver"); +MODULE_AUTHOR("Hans de Goede <hansg@kernel.org>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/lg-laptop.c b/drivers/platform/x86/lg-laptop.c index 78c48a1f9c..9c7857842c 100644 --- a/drivers/platform/x86/lg-laptop.c +++ b/drivers/platform/x86/lg-laptop.c @@ -769,7 +769,6 @@ static struct acpi_driver acpi_driver = { .remove = acpi_remove, .notify = acpi_notify, }, - .owner = THIS_MODULE, }; static int __init acpi_init(void) diff --git a/drivers/platform/x86/meegopad_anx7428.c b/drivers/platform/x86/meegopad_anx7428.c new file mode 100644 index 0000000000..b2c4d4f526 --- /dev/null +++ b/drivers/platform/x86/meegopad_anx7428.c @@ -0,0 +1,150 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Driver to power on the Analogix ANX7428 USB Type-C crosspoint switch + * on MeeGoPad top-set boxes. + * + * The MeeGoPad T8 and T9 are Cherry Trail top-set boxes which + * use an ANX7428 to provide a Type-C port with USB3.1 Gen 1 and + * DisplayPort over Type-C alternate mode support. + * + * The ANX7428 has a microcontroller which takes care of the PD + * negotiation and automatically sets the builtin Crosspoint Switch + * to send the right signal to the 4 highspeed pairs of the Type-C + * connector. It also takes care of HPD and AUX channel routing for + * DP alternate mode. + * + * IOW the ANX7428 operates fully autonomous and to the x5-Z8350 SoC + * things look like there simply is a USB-3 Type-A connector and a + * separate DisplayPort connector. Except that the BIOS does not + * power on the ANX7428 at boot. This driver takes care of powering + * on the ANX7428. + * + * It should be possible to tell the micro-controller which data- and/or + * power-role to negotiate and to swap the role(s) after negotiation + * but the MeeGoPad top-set boxes always draw their power from a separate + * power-connector and they only support USB host-mode. So this functionality + * is unnecessary and due to lack of documentation this is tricky to support. + * + * For a more complete ANX7428 driver see drivers/usb/misc/anx7418/ of + * the LineageOS kernel for the LG G5 (International) aka the LG H850: + * https://github.com/LineageOS/android_kernel_lge_msm8996/ + * + * (C) Copyright 2024 Hans de Goede <hansg@kernel.org> + */ + +#include <linux/acpi.h> +#include <linux/bits.h> +#include <linux/delay.h> +#include <linux/dev_printk.h> +#include <linux/dmi.h> +#include <linux/err.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/types.h> + +/* Register addresses and fields */ +#define VENDOR_ID 0x00 +#define DEVICE_ID 0x02 + +#define TX_STATUS 0x16 +#define STATUS_SUCCESS BIT(0) +#define STATUS_ERROR BIT(1) +#define OCM_STARTUP BIT(7) + +static bool force; +module_param(force, bool, 0444); +MODULE_PARM_DESC(force, "Force the driver to probe on unknown boards"); + +static const struct acpi_gpio_params enable_gpio = { 0, 0, false }; +static const struct acpi_gpio_params reset_gpio = { 1, 0, true }; + +static const struct acpi_gpio_mapping meegopad_anx7428_gpios[] = { + { "enable-gpios", &enable_gpio, 1 }, + { "reset-gpios", &reset_gpio, 1 }, + { } +}; + +static const struct dmi_system_id meegopad_anx7428_ids[] = { + { + /* Meegopad T08 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Default string"), + DMI_MATCH(DMI_PRODUCT_NAME, "Default string"), + DMI_MATCH(DMI_BOARD_NAME, "T3 MRD"), + DMI_MATCH(DMI_BOARD_VERSION, "V1.1"), + }, + }, + { } +}; + +static int anx7428_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct gpio_desc *gpio; + int ret, val; + + if (!dmi_check_system(meegopad_anx7428_ids) && !force) { + dev_warn(dev, "Not probing unknown board, pass meegopad_anx7428.force=1 to probe"); + return -ENODEV; + } + + ret = devm_acpi_dev_add_driver_gpios(dev, meegopad_anx7428_gpios); + if (ret) + return ret; + + /* + * Set GPIOs to desired values while getting them, they are not needed + * afterwards. Ordering and delays come from android_kernel_lge_msm8996. + */ + gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH); + if (IS_ERR(gpio)) + return dev_err_probe(dev, PTR_ERR(gpio), "getting enable GPIO\n"); + + fsleep(10000); + + gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(gpio)) + return dev_err_probe(dev, PTR_ERR(gpio), "getting reset GPIO\n"); + + /* Wait for the OCM (On Chip Microcontroller) to start */ + ret = read_poll_timeout(i2c_smbus_read_byte_data, val, + val >= 0 && (val & OCM_STARTUP), + 5000, 50000, true, client, TX_STATUS); + if (ret) + return dev_err_probe(dev, ret, + "On Chip Microcontroller did not start, status: 0x%02x\n", + val); + + ret = i2c_smbus_read_word_data(client, VENDOR_ID); + if (ret < 0) + return dev_err_probe(dev, ret, "reading vendor-id register\n"); + val = ret; + + ret = i2c_smbus_read_word_data(client, DEVICE_ID); + if (ret < 0) + return dev_err_probe(dev, ret, "reading device-id register\n"); + + dev_dbg(dev, "Powered on ANX7428 id %04x:%04x\n", val, ret); + return 0; +} + +static const struct acpi_device_id anx7428_acpi_match[] = { + { "ANXO7418" }, /* ACPI says 7418 (max 2 DP lanes version) but HW is 7428 */ + { } +}; +MODULE_DEVICE_TABLE(acpi, anx7428_acpi_match); + +static struct i2c_driver anx7428_driver = { + .driver = { + .name = "meegopad_anx7428", + .acpi_match_table = anx7428_acpi_match, + }, + .probe = anx7428_probe, +}; +module_i2c_driver(anx7428_driver); + +MODULE_AUTHOR("Hans de Goede <hansg@kernel.org>"); +MODULE_DESCRIPTION("MeeGoPad ANX7428 driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/msi-laptop.c b/drivers/platform/x86/msi-laptop.c index f4c6c36e05..e5391a3701 100644 --- a/drivers/platform/x86/msi-laptop.c +++ b/drivers/platform/x86/msi-laptop.c @@ -317,7 +317,7 @@ static ssize_t show_wlan(struct device *dev, if (ret < 0) return ret; - return sprintf(buf, "%i\n", enabled); + return sysfs_emit(buf, "%i\n", enabled); } static ssize_t store_wlan(struct device *dev, @@ -341,7 +341,7 @@ static ssize_t show_bluetooth(struct device *dev, if (ret < 0) return ret; - return sprintf(buf, "%i\n", enabled); + return sysfs_emit(buf, "%i\n", enabled); } static ssize_t store_bluetooth(struct device *dev, @@ -364,7 +364,7 @@ static ssize_t show_threeg(struct device *dev, if (ret < 0) return ret; - return sprintf(buf, "%i\n", threeg_s); + return sysfs_emit(buf, "%i\n", threeg_s); } static ssize_t store_threeg(struct device *dev, @@ -383,7 +383,7 @@ static ssize_t show_lcd_level(struct device *dev, if (ret < 0) return ret; - return sprintf(buf, "%i\n", ret); + return sysfs_emit(buf, "%i\n", ret); } static ssize_t store_lcd_level(struct device *dev, @@ -413,7 +413,7 @@ static ssize_t show_auto_brightness(struct device *dev, if (ret < 0) return ret; - return sprintf(buf, "%i\n", ret); + return sysfs_emit(buf, "%i\n", ret); } static ssize_t store_auto_brightness(struct device *dev, @@ -443,7 +443,7 @@ static ssize_t show_touchpad(struct device *dev, if (result < 0) return result; - return sprintf(buf, "%i\n", !!(rdata & MSI_STANDARD_EC_TOUCHPAD_MASK)); + return sysfs_emit(buf, "%i\n", !!(rdata & MSI_STANDARD_EC_TOUCHPAD_MASK)); } static ssize_t show_turbo(struct device *dev, @@ -457,7 +457,7 @@ static ssize_t show_turbo(struct device *dev, if (result < 0) return result; - return sprintf(buf, "%i\n", !!(rdata & MSI_STANDARD_EC_TURBO_MASK)); + return sysfs_emit(buf, "%i\n", !!(rdata & MSI_STANDARD_EC_TURBO_MASK)); } static ssize_t show_eco(struct device *dev, @@ -471,7 +471,7 @@ static ssize_t show_eco(struct device *dev, if (result < 0) return result; - return sprintf(buf, "%i\n", !!(rdata & MSI_STANDARD_EC_ECO_MASK)); + return sysfs_emit(buf, "%i\n", !!(rdata & MSI_STANDARD_EC_ECO_MASK)); } static ssize_t show_turbo_cooldown(struct device *dev, @@ -485,7 +485,7 @@ static ssize_t show_turbo_cooldown(struct device *dev, if (result < 0) return result; - return sprintf(buf, "%i\n", (!!(rdata & MSI_STANDARD_EC_TURBO_MASK)) | + return sysfs_emit(buf, "%i\n", (!!(rdata & MSI_STANDARD_EC_TURBO_MASK)) | (!!(rdata & MSI_STANDARD_EC_TURBO_COOLDOWN_MASK) << 1)); } @@ -500,7 +500,7 @@ static ssize_t show_auto_fan(struct device *dev, if (result < 0) return result; - return sprintf(buf, "%i\n", !!(rdata & MSI_STANDARD_EC_AUTOFAN_MASK)); + return sysfs_emit(buf, "%i\n", !!(rdata & MSI_STANDARD_EC_AUTOFAN_MASK)); } static ssize_t store_auto_fan(struct device *dev, diff --git a/drivers/platform/x86/msi-wmi-platform.c b/drivers/platform/x86/msi-wmi-platform.c new file mode 100644 index 0000000000..436fb91a47 --- /dev/null +++ b/drivers/platform/x86/msi-wmi-platform.c @@ -0,0 +1,428 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Linux driver for WMI platform features on MSI notebooks. + * + * Copyright (C) 2024 Armin Wolf <W_Armin@gmx.de> + */ + +#define pr_format(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/acpi.h> +#include <linux/bits.h> +#include <linux/bitfield.h> +#include <linux/debugfs.h> +#include <linux/device.h> +#include <linux/device/driver.h> +#include <linux/errno.h> +#include <linux/hwmon.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/printk.h> +#include <linux/rwsem.h> +#include <linux/types.h> +#include <linux/wmi.h> + +#include <asm/unaligned.h> + +#define DRIVER_NAME "msi-wmi-platform" + +#define MSI_PLATFORM_GUID "ABBC0F6E-8EA1-11d1-00A0-C90629100000" + +#define MSI_WMI_PLATFORM_INTERFACE_VERSION 2 + +#define MSI_PLATFORM_WMI_MAJOR_OFFSET 1 +#define MSI_PLATFORM_WMI_MINOR_OFFSET 2 + +#define MSI_PLATFORM_EC_FLAGS_OFFSET 1 +#define MSI_PLATFORM_EC_MINOR_MASK GENMASK(3, 0) +#define MSI_PLATFORM_EC_MAJOR_MASK GENMASK(5, 4) +#define MSI_PLATFORM_EC_CHANGED_PAGE BIT(6) +#define MSI_PLATFORM_EC_IS_TIGERLAKE BIT(7) +#define MSI_PLATFORM_EC_VERSION_OFFSET 2 + +static bool force; +module_param_unsafe(force, bool, 0); +MODULE_PARM_DESC(force, "Force loading without checking for supported WMI interface versions"); + +enum msi_wmi_platform_method { + MSI_PLATFORM_GET_PACKAGE = 0x01, + MSI_PLATFORM_SET_PACKAGE = 0x02, + MSI_PLATFORM_GET_EC = 0x03, + MSI_PLATFORM_SET_EC = 0x04, + MSI_PLATFORM_GET_BIOS = 0x05, + MSI_PLATFORM_SET_BIOS = 0x06, + MSI_PLATFORM_GET_SMBUS = 0x07, + MSI_PLATFORM_SET_SMBUS = 0x08, + MSI_PLATFORM_GET_MASTER_BATTERY = 0x09, + MSI_PLATFORM_SET_MASTER_BATTERY = 0x0a, + MSI_PLATFORM_GET_SLAVE_BATTERY = 0x0b, + MSI_PLATFORM_SET_SLAVE_BATTERY = 0x0c, + MSI_PLATFORM_GET_TEMPERATURE = 0x0d, + MSI_PLATFORM_SET_TEMPERATURE = 0x0e, + MSI_PLATFORM_GET_THERMAL = 0x0f, + MSI_PLATFORM_SET_THERMAL = 0x10, + MSI_PLATFORM_GET_FAN = 0x11, + MSI_PLATFORM_SET_FAN = 0x12, + MSI_PLATFORM_GET_DEVICE = 0x13, + MSI_PLATFORM_SET_DEVICE = 0x14, + MSI_PLATFORM_GET_POWER = 0x15, + MSI_PLATFORM_SET_POWER = 0x16, + MSI_PLATFORM_GET_DEBUG = 0x17, + MSI_PLATFORM_SET_DEBUG = 0x18, + MSI_PLATFORM_GET_AP = 0x19, + MSI_PLATFORM_SET_AP = 0x1a, + MSI_PLATFORM_GET_DATA = 0x1b, + MSI_PLATFORM_SET_DATA = 0x1c, + MSI_PLATFORM_GET_WMI = 0x1d, +}; + +struct msi_wmi_platform_debugfs_data { + struct wmi_device *wdev; + enum msi_wmi_platform_method method; + struct rw_semaphore buffer_lock; /* Protects debugfs buffer */ + size_t length; + u8 buffer[32]; +}; + +static const char * const msi_wmi_platform_debugfs_names[] = { + "get_package", + "set_package", + "get_ec", + "set_ec", + "get_bios", + "set_bios", + "get_smbus", + "set_smbus", + "get_master_battery", + "set_master_battery", + "get_slave_battery", + "set_slave_battery", + "get_temperature", + "set_temperature", + "get_thermal", + "set_thermal", + "get_fan", + "set_fan", + "get_device", + "set_device", + "get_power", + "set_power", + "get_debug", + "set_debug", + "get_ap", + "set_ap", + "get_data", + "set_data", + "get_wmi" +}; + +static int msi_wmi_platform_parse_buffer(union acpi_object *obj, u8 *output, size_t length) +{ + if (obj->type != ACPI_TYPE_BUFFER) + return -ENOMSG; + + if (obj->buffer.length != length) + return -EPROTO; + + if (!obj->buffer.pointer[0]) + return -EIO; + + memcpy(output, obj->buffer.pointer, obj->buffer.length); + + return 0; +} + +static int msi_wmi_platform_query(struct wmi_device *wdev, enum msi_wmi_platform_method method, + u8 *input, size_t input_length, u8 *output, size_t output_length) +{ + struct acpi_buffer out = { ACPI_ALLOCATE_BUFFER, NULL }; + struct acpi_buffer in = { + .length = input_length, + .pointer = input + }; + union acpi_object *obj; + acpi_status status; + int ret; + + if (!input_length || !output_length) + return -EINVAL; + + status = wmidev_evaluate_method(wdev, 0x0, method, &in, &out); + if (ACPI_FAILURE(status)) + return -EIO; + + obj = out.pointer; + if (!obj) + return -ENODATA; + + ret = msi_wmi_platform_parse_buffer(obj, output, output_length); + kfree(obj); + + return ret; +} + +static umode_t msi_wmi_platform_is_visible(const void *drvdata, enum hwmon_sensor_types type, + u32 attr, int channel) +{ + return 0444; +} + +static int msi_wmi_platform_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, + int channel, long *val) +{ + struct wmi_device *wdev = dev_get_drvdata(dev); + u8 input[32] = { 0 }; + u8 output[32]; + u16 data; + int ret; + + ret = msi_wmi_platform_query(wdev, MSI_PLATFORM_GET_FAN, input, sizeof(input), output, + sizeof(output)); + if (ret < 0) + return ret; + + data = get_unaligned_be16(&output[channel * 2 + 1]); + if (!data) + *val = 0; + else + *val = 480000 / data; + + return 0; +} + +static const struct hwmon_ops msi_wmi_platform_ops = { + .is_visible = msi_wmi_platform_is_visible, + .read = msi_wmi_platform_read, +}; + +static const struct hwmon_channel_info * const msi_wmi_platform_info[] = { + HWMON_CHANNEL_INFO(fan, + HWMON_F_INPUT, + HWMON_F_INPUT, + HWMON_F_INPUT, + HWMON_F_INPUT + ), + NULL +}; + +static const struct hwmon_chip_info msi_wmi_platform_chip_info = { + .ops = &msi_wmi_platform_ops, + .info = msi_wmi_platform_info, +}; + +static ssize_t msi_wmi_platform_write(struct file *fp, const char __user *input, size_t length, + loff_t *offset) +{ + struct seq_file *seq = fp->private_data; + struct msi_wmi_platform_debugfs_data *data = seq->private; + u8 payload[32] = { }; + ssize_t ret; + + /* Do not allow partial writes */ + if (*offset != 0) + return -EINVAL; + + /* Do not allow incomplete command buffers */ + if (length != data->length) + return -EINVAL; + + ret = simple_write_to_buffer(payload, sizeof(payload), offset, input, length); + if (ret < 0) + return ret; + + down_write(&data->buffer_lock); + ret = msi_wmi_platform_query(data->wdev, data->method, payload, data->length, data->buffer, + data->length); + up_write(&data->buffer_lock); + + if (ret < 0) + return ret; + + return length; +} + +static int msi_wmi_platform_show(struct seq_file *seq, void *p) +{ + struct msi_wmi_platform_debugfs_data *data = seq->private; + int ret; + + down_read(&data->buffer_lock); + ret = seq_write(seq, data->buffer, data->length); + up_read(&data->buffer_lock); + + return ret; +} + +static int msi_wmi_platform_open(struct inode *inode, struct file *fp) +{ + struct msi_wmi_platform_debugfs_data *data = inode->i_private; + + /* The seq_file uses the last byte of the buffer for detecting buffer overflows */ + return single_open_size(fp, msi_wmi_platform_show, data, data->length + 1); +} + +static const struct file_operations msi_wmi_platform_debugfs_fops = { + .owner = THIS_MODULE, + .open = msi_wmi_platform_open, + .read = seq_read, + .write = msi_wmi_platform_write, + .llseek = seq_lseek, + .release = single_release, +}; + +static void msi_wmi_platform_debugfs_remove(void *data) +{ + struct dentry *dir = data; + + debugfs_remove_recursive(dir); +} + +static void msi_wmi_platform_debugfs_add(struct wmi_device *wdev, struct dentry *dir, + const char *name, enum msi_wmi_platform_method method) +{ + struct msi_wmi_platform_debugfs_data *data; + struct dentry *entry; + + data = devm_kzalloc(&wdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return; + + data->wdev = wdev; + data->method = method; + init_rwsem(&data->buffer_lock); + + /* The ACPI firmware for now always requires a 32 byte input buffer due to + * a peculiarity in how Windows handles the CreateByteField() ACPI operator. + */ + data->length = 32; + + entry = debugfs_create_file(name, 0600, dir, data, &msi_wmi_platform_debugfs_fops); + if (IS_ERR(entry)) + devm_kfree(&wdev->dev, data); +} + +static void msi_wmi_platform_debugfs_init(struct wmi_device *wdev) +{ + struct dentry *dir; + char dir_name[64]; + int ret, method; + + scnprintf(dir_name, ARRAY_SIZE(dir_name), "%s-%s", DRIVER_NAME, dev_name(&wdev->dev)); + + dir = debugfs_create_dir(dir_name, NULL); + if (IS_ERR(dir)) + return; + + ret = devm_add_action_or_reset(&wdev->dev, msi_wmi_platform_debugfs_remove, dir); + if (ret < 0) + return; + + for (method = MSI_PLATFORM_GET_PACKAGE; method <= MSI_PLATFORM_GET_WMI; method++) + msi_wmi_platform_debugfs_add(wdev, dir, msi_wmi_platform_debugfs_names[method - 1], + method); +} + +static int msi_wmi_platform_hwmon_init(struct wmi_device *wdev) +{ + struct device *hdev; + + hdev = devm_hwmon_device_register_with_info(&wdev->dev, "msi_wmi_platform", wdev, + &msi_wmi_platform_chip_info, NULL); + + return PTR_ERR_OR_ZERO(hdev); +} + +static int msi_wmi_platform_ec_init(struct wmi_device *wdev) +{ + u8 input[32] = { 0 }; + u8 output[32]; + u8 flags; + int ret; + + ret = msi_wmi_platform_query(wdev, MSI_PLATFORM_GET_EC, input, sizeof(input), output, + sizeof(output)); + if (ret < 0) + return ret; + + flags = output[MSI_PLATFORM_EC_FLAGS_OFFSET]; + + dev_dbg(&wdev->dev, "EC RAM version %lu.%lu\n", + FIELD_GET(MSI_PLATFORM_EC_MAJOR_MASK, flags), + FIELD_GET(MSI_PLATFORM_EC_MINOR_MASK, flags)); + dev_dbg(&wdev->dev, "EC firmware version %.28s\n", + &output[MSI_PLATFORM_EC_VERSION_OFFSET]); + + if (!(flags & MSI_PLATFORM_EC_IS_TIGERLAKE)) { + if (!force) + return -ENODEV; + + dev_warn(&wdev->dev, "Loading on a non-Tigerlake platform\n"); + } + + return 0; +} + +static int msi_wmi_platform_init(struct wmi_device *wdev) +{ + u8 input[32] = { 0 }; + u8 output[32]; + int ret; + + ret = msi_wmi_platform_query(wdev, MSI_PLATFORM_GET_WMI, input, sizeof(input), output, + sizeof(output)); + if (ret < 0) + return ret; + + dev_dbg(&wdev->dev, "WMI interface version %u.%u\n", + output[MSI_PLATFORM_WMI_MAJOR_OFFSET], + output[MSI_PLATFORM_WMI_MINOR_OFFSET]); + + if (output[MSI_PLATFORM_WMI_MAJOR_OFFSET] != MSI_WMI_PLATFORM_INTERFACE_VERSION) { + if (!force) + return -ENODEV; + + dev_warn(&wdev->dev, "Loading despite unsupported WMI interface version (%u.%u)\n", + output[MSI_PLATFORM_WMI_MAJOR_OFFSET], + output[MSI_PLATFORM_WMI_MINOR_OFFSET]); + } + + return 0; +} + +static int msi_wmi_platform_probe(struct wmi_device *wdev, const void *context) +{ + int ret; + + ret = msi_wmi_platform_init(wdev); + if (ret < 0) + return ret; + + ret = msi_wmi_platform_ec_init(wdev); + if (ret < 0) + return ret; + + msi_wmi_platform_debugfs_init(wdev); + + return msi_wmi_platform_hwmon_init(wdev); +} + +static const struct wmi_device_id msi_wmi_platform_id_table[] = { + { MSI_PLATFORM_GUID, NULL }, + { } +}; +MODULE_DEVICE_TABLE(wmi, msi_wmi_platform_id_table); + +static struct wmi_driver msi_wmi_platform_driver = { + .driver = { + .name = DRIVER_NAME, + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + }, + .id_table = msi_wmi_platform_id_table, + .probe = msi_wmi_platform_probe, + .no_singleton = true, +}; +module_wmi_driver(msi_wmi_platform_driver); + +MODULE_AUTHOR("Armin Wolf <W_Armin@gmx.de>"); +MODULE_DESCRIPTION("MSI WMI platform features"); +MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/p2sb.c b/drivers/platform/x86/p2sb.c index 1ac30034f3..3bf5d22434 100644 --- a/drivers/platform/x86/p2sb.c +++ b/drivers/platform/x86/p2sb.c @@ -43,7 +43,7 @@ struct p2sb_res_cache { static struct p2sb_res_cache p2sb_resources[NR_P2SB_RES_CACHE]; -static int p2sb_get_devfn(unsigned int *devfn) +static void p2sb_get_devfn(unsigned int *devfn) { unsigned int fn = P2SB_DEVFN_DEFAULT; const struct x86_cpu_id *id; @@ -53,7 +53,6 @@ static int p2sb_get_devfn(unsigned int *devfn) fn = (unsigned int)id->driver_data; *devfn = fn; - return 0; } static bool p2sb_valid_resource(const struct resource *res) @@ -132,9 +131,7 @@ static int p2sb_cache_resources(void) int ret; /* Get devfn for P2SB device itself */ - ret = p2sb_get_devfn(&devfn_p2sb); - if (ret) - return ret; + p2sb_get_devfn(&devfn_p2sb); bus = p2sb_get_bus(NULL); if (!bus) @@ -191,17 +188,13 @@ static int p2sb_cache_resources(void) int p2sb_bar(struct pci_bus *bus, unsigned int devfn, struct resource *mem) { struct p2sb_res_cache *cache; - int ret; bus = p2sb_get_bus(bus); if (!bus) return -ENODEV; - if (!devfn) { - ret = p2sb_get_devfn(&devfn); - if (ret) - return ret; - } + if (!devfn) + p2sb_get_devfn(&devfn); cache = &p2sb_resources[PCI_FUNC(devfn)]; if (cache->bus_dev_id != bus->dev.id) diff --git a/drivers/platform/x86/quickstart.c b/drivers/platform/x86/quickstart.c new file mode 100644 index 0000000000..df496c7e71 --- /dev/null +++ b/drivers/platform/x86/quickstart.c @@ -0,0 +1,246 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * ACPI Direct App Launch driver + * + * Copyright (C) 2024 Armin Wolf <W_Armin@gmx.de> + * Copyright (C) 2022 Arvid Norlander <lkml@vorapal.se> + * Copyright (C) 2007-2010 Angelo Arrifano <miknix@gmail.com> + * + * Information gathered from disassembled dsdt and from here: + * <https://archive.org/details/microsoft-acpi-dirapplaunch> + */ + +#include <linux/acpi.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/input/sparse-keymap.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> +#include <linux/pm_wakeup.h> +#include <linux/printk.h> +#include <linux/slab.h> +#include <linux/sysfs.h> +#include <linux/types.h> + +#include <asm/unaligned.h> + +#define DRIVER_NAME "quickstart" + +/* + * There will be two events: + * 0x02 - Button was pressed while device was off/sleeping. + * 0x80 - Button was pressed while device was up. + */ +#define QUICKSTART_EVENT_RUNTIME 0x80 + +struct quickstart_data { + struct device *dev; + struct mutex input_lock; /* Protects input sequence during notify */ + struct input_dev *input_device; + char input_name[32]; + char phys[32]; + u32 id; +}; + +/* + * Knowing what these buttons do require system specific knowledge. + * This could be done by matching on DMI data in a long quirk table. + * However, it is easier to leave it up to user space to figure this out. + * + * Using for example udev hwdb the scancode 0x1 can be remapped suitably. + */ +static const struct key_entry quickstart_keymap[] = { + { KE_KEY, 0x1, { KEY_UNKNOWN } }, + { KE_END, 0 }, +}; + +static ssize_t button_id_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct quickstart_data *data = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%u\n", data->id); +} +static DEVICE_ATTR_RO(button_id); + +static struct attribute *quickstart_attrs[] = { + &dev_attr_button_id.attr, + NULL +}; +ATTRIBUTE_GROUPS(quickstart); + +static void quickstart_notify(acpi_handle handle, u32 event, void *context) +{ + struct quickstart_data *data = context; + + switch (event) { + case QUICKSTART_EVENT_RUNTIME: + mutex_lock(&data->input_lock); + sparse_keymap_report_event(data->input_device, 0x1, 1, true); + mutex_unlock(&data->input_lock); + + acpi_bus_generate_netlink_event(DRIVER_NAME, dev_name(data->dev), event, 0); + break; + default: + dev_err(data->dev, FW_INFO "Unexpected ACPI notify event (%u)\n", event); + break; + } +} + +/* + * The GHID ACPI method is used to indicate the "role" of the button. + * However, all the meanings of these values are vendor defined. + * + * We do however expose this value to user space. + */ +static int quickstart_get_ghid(struct quickstart_data *data) +{ + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + acpi_handle handle = ACPI_HANDLE(data->dev); + union acpi_object *obj; + acpi_status status; + int ret = 0; + + /* + * This returns a buffer telling the button usage ID, + * and triggers pending notify events (The ones before booting). + */ + status = acpi_evaluate_object_typed(handle, "GHID", NULL, &buffer, ACPI_TYPE_BUFFER); + if (ACPI_FAILURE(status)) + return -EIO; + + obj = buffer.pointer; + if (!obj) + return -ENODATA; + + /* + * Quoting the specification: + * "The GHID method can return a BYTE, WORD, or DWORD. + * The value must be encoded in little-endian byte + * order (least significant byte first)." + */ + switch (obj->buffer.length) { + case 1: + data->id = obj->buffer.pointer[0]; + break; + case 2: + data->id = get_unaligned_le16(obj->buffer.pointer); + break; + case 4: + data->id = get_unaligned_le32(obj->buffer.pointer); + break; + default: + dev_err(data->dev, + FW_BUG "GHID method returned buffer of unexpected length %u\n", + obj->buffer.length); + ret = -EIO; + break; + } + + kfree(obj); + + return ret; +} + +static void quickstart_notify_remove(void *context) +{ + struct quickstart_data *data = context; + acpi_handle handle; + + handle = ACPI_HANDLE(data->dev); + + acpi_remove_notify_handler(handle, ACPI_DEVICE_NOTIFY, quickstart_notify); +} + +static void quickstart_mutex_destroy(void *data) +{ + struct mutex *lock = data; + + mutex_destroy(lock); +} + +static int quickstart_probe(struct platform_device *pdev) +{ + struct quickstart_data *data; + acpi_handle handle; + acpi_status status; + int ret; + + handle = ACPI_HANDLE(&pdev->dev); + if (!handle) + return -ENODEV; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->dev = &pdev->dev; + dev_set_drvdata(&pdev->dev, data); + + mutex_init(&data->input_lock); + ret = devm_add_action_or_reset(&pdev->dev, quickstart_mutex_destroy, &data->input_lock); + if (ret < 0) + return ret; + + /* + * We have to initialize the device wakeup before evaluating GHID because + * doing so will notify the device if the button was used to wake the machine + * from S5. + */ + device_init_wakeup(&pdev->dev, true); + + ret = quickstart_get_ghid(data); + if (ret < 0) + return ret; + + data->input_device = devm_input_allocate_device(&pdev->dev); + if (!data->input_device) + return -ENOMEM; + + ret = sparse_keymap_setup(data->input_device, quickstart_keymap, NULL); + if (ret < 0) + return ret; + + snprintf(data->input_name, sizeof(data->input_name), "Quickstart Button %u", data->id); + snprintf(data->phys, sizeof(data->phys), DRIVER_NAME "/input%u", data->id); + + data->input_device->name = data->input_name; + data->input_device->phys = data->phys; + data->input_device->id.bustype = BUS_HOST; + + ret = input_register_device(data->input_device); + if (ret < 0) + return ret; + + status = acpi_install_notify_handler(handle, ACPI_DEVICE_NOTIFY, quickstart_notify, data); + if (ACPI_FAILURE(status)) + return -EIO; + + return devm_add_action_or_reset(&pdev->dev, quickstart_notify_remove, data); +} + +static const struct acpi_device_id quickstart_device_ids[] = { + { "PNP0C32" }, + { } +}; +MODULE_DEVICE_TABLE(acpi, quickstart_device_ids); + +static struct platform_driver quickstart_platform_driver = { + .driver = { + .name = DRIVER_NAME, + .dev_groups = quickstart_groups, + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + .acpi_match_table = quickstart_device_ids, + }, + .probe = quickstart_probe, +}; +module_platform_driver(quickstart_platform_driver); + +MODULE_AUTHOR("Armin Wolf <W_Armin@gmx.de>"); +MODULE_AUTHOR("Arvid Norlander <lkml@vorpal.se>"); +MODULE_AUTHOR("Angelo Arrifano"); +MODULE_DESCRIPTION("ACPI Direct App Launch driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/samsung-laptop.c b/drivers/platform/x86/samsung-laptop.c index b4aa8ba35d..3d2f8e7583 100644 --- a/drivers/platform/x86/samsung-laptop.c +++ b/drivers/platform/x86/samsung-laptop.c @@ -661,9 +661,9 @@ static ssize_t get_performance_level(struct device *dev, /* The logic is backwards, yeah, lots of fun... */ for (i = 0; config->performance_levels[i].name; ++i) { if (sretval.data[0] == config->performance_levels[i].value) - return sprintf(buf, "%s\n", config->performance_levels[i].name); + return sysfs_emit(buf, "%s\n", config->performance_levels[i].name); } - return sprintf(buf, "%s\n", "unknown"); + return sysfs_emit(buf, "%s\n", "unknown"); } static ssize_t set_performance_level(struct device *dev, @@ -744,7 +744,7 @@ static ssize_t get_battery_life_extender(struct device *dev, if (ret < 0) return ret; - return sprintf(buf, "%d\n", ret); + return sysfs_emit(buf, "%d\n", ret); } static ssize_t set_battery_life_extender(struct device *dev, @@ -813,7 +813,7 @@ static ssize_t get_usb_charge(struct device *dev, if (ret < 0) return ret; - return sprintf(buf, "%d\n", ret); + return sysfs_emit(buf, "%d\n", ret); } static ssize_t set_usb_charge(struct device *dev, @@ -878,7 +878,7 @@ static ssize_t get_lid_handling(struct device *dev, if (ret < 0) return ret; - return sprintf(buf, "%d\n", ret); + return sysfs_emit(buf, "%d\n", ret); } static ssize_t set_lid_handling(struct device *dev, diff --git a/drivers/platform/x86/siemens/simatic-ipc-batt-apollolake.c b/drivers/platform/x86/siemens/simatic-ipc-batt-apollolake.c index 31a139d87d..5edc294de6 100644 --- a/drivers/platform/x86/siemens/simatic-ipc-batt-apollolake.c +++ b/drivers/platform/x86/siemens/simatic-ipc-batt-apollolake.c @@ -45,6 +45,7 @@ static struct platform_driver simatic_ipc_batt_driver = { module_platform_driver(simatic_ipc_batt_driver); +MODULE_DESCRIPTION("CMOS Battery monitoring for Simatic IPCs based on Apollo Lake GPIO"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:" KBUILD_MODNAME); MODULE_SOFTDEP("pre: simatic-ipc-batt platform:apollolake-pinctrl"); diff --git a/drivers/platform/x86/siemens/simatic-ipc-batt-elkhartlake.c b/drivers/platform/x86/siemens/simatic-ipc-batt-elkhartlake.c index a7676f2240..e6a56d14b5 100644 --- a/drivers/platform/x86/siemens/simatic-ipc-batt-elkhartlake.c +++ b/drivers/platform/x86/siemens/simatic-ipc-batt-elkhartlake.c @@ -45,6 +45,7 @@ static struct platform_driver simatic_ipc_batt_driver = { module_platform_driver(simatic_ipc_batt_driver); +MODULE_DESCRIPTION("CMOS Battery monitoring for Simatic IPCs based on Elkhart Lake GPIO"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:" KBUILD_MODNAME); MODULE_SOFTDEP("pre: simatic-ipc-batt platform:elkhartlake-pinctrl"); diff --git a/drivers/platform/x86/siemens/simatic-ipc-batt-f7188x.c b/drivers/platform/x86/siemens/simatic-ipc-batt-f7188x.c index 5e77e05fdb..f8849d0e48 100644 --- a/drivers/platform/x86/siemens/simatic-ipc-batt-f7188x.c +++ b/drivers/platform/x86/siemens/simatic-ipc-batt-f7188x.c @@ -81,6 +81,7 @@ static struct platform_driver simatic_ipc_batt_driver = { module_platform_driver(simatic_ipc_batt_driver); +MODULE_DESCRIPTION("CMOS Battery monitoring for Simatic IPCs based on Nuvoton GPIO"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:" KBUILD_MODNAME); MODULE_SOFTDEP("pre: simatic-ipc-batt gpio_f7188x platform:elkhartlake-pinctrl platform:alderlake-pinctrl"); diff --git a/drivers/platform/x86/siemens/simatic-ipc-batt.c b/drivers/platform/x86/siemens/simatic-ipc-batt.c index c6dd263b4e..d9aff10608 100644 --- a/drivers/platform/x86/siemens/simatic-ipc-batt.c +++ b/drivers/platform/x86/siemens/simatic-ipc-batt.c @@ -247,6 +247,7 @@ static struct platform_driver simatic_ipc_batt_driver = { module_platform_driver(simatic_ipc_batt_driver); +MODULE_DESCRIPTION("CMOS core battery driver for Siemens Simatic IPCs"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:" KBUILD_MODNAME); MODULE_AUTHOR("Henning Schild <henning.schild@siemens.com>"); diff --git a/drivers/platform/x86/siemens/simatic-ipc.c b/drivers/platform/x86/siemens/simatic-ipc.c index 8ca6e277fa..7039874d8f 100644 --- a/drivers/platform/x86/siemens/simatic-ipc.c +++ b/drivers/platform/x86/siemens/simatic-ipc.c @@ -231,6 +231,7 @@ static void __exit simatic_ipc_exit_module(void) module_init(simatic_ipc_init_module); module_exit(simatic_ipc_exit_module); +MODULE_DESCRIPTION("Siemens SIMATIC IPC platform driver"); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Gerd Haeussler <gerd.haeussler.ext@siemens.com>"); MODULE_ALIAS("dmi:*:svnSIEMENSAG:*"); diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index 40878e327a..3e94fdd1ea 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -3303,7 +3303,6 @@ static struct acpi_driver sony_nc_driver = { .name = SONY_NC_DRIVER_NAME, .class = SONY_NC_CLASS, .ids = sony_nc_device_ids, - .owner = THIS_MODULE, .ops = { .add = sony_nc_add, .remove = sony_nc_remove, @@ -4844,7 +4843,6 @@ static struct acpi_driver sony_pic_driver = { .name = SONY_PIC_DRIVER_NAME, .class = SONY_PIC_CLASS, .ids = sony_pic_device_ids, - .owner = THIS_MODULE, .ops = { .add = sony_pic_add, .remove = sony_pic_remove, diff --git a/drivers/platform/x86/think-lmi.c b/drivers/platform/x86/think-lmi.c index 9345316b45..0f2264bb75 100644 --- a/drivers/platform/x86/think-lmi.c +++ b/drivers/platform/x86/think-lmi.c @@ -175,9 +175,6 @@ MODULE_PARM_DESC(debug_support, "Enable debug command support"); #define TLMI_SMP_PWD BIT(6) /* System Management */ #define TLMI_CERT BIT(7) /* Certificate Based */ -#define to_tlmi_pwd_setting(kobj) container_of(kobj, struct tlmi_pwd_setting, kobj) -#define to_tlmi_attr_setting(kobj) container_of(kobj, struct tlmi_attr_setting, kobj) - static const struct tlmi_err_codes tlmi_errs[] = { {"Success", 0}, {"Not Supported", -EOPNOTSUPP}, @@ -198,6 +195,16 @@ static struct think_lmi tlmi_priv; static const struct class *fw_attr_class; static DEFINE_MUTEX(tlmi_mutex); +static inline struct tlmi_pwd_setting *to_tlmi_pwd_setting(struct kobject *kobj) +{ + return container_of(kobj, struct tlmi_pwd_setting, kobj); +} + +static inline struct tlmi_attr_setting *to_tlmi_attr_setting(struct kobject *kobj) +{ + return container_of(kobj, struct tlmi_attr_setting, kobj); +} + /* Convert BIOS WMI error string to suitable error code */ static int tlmi_errstr_to_err(const char *errstr) { diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 87a4a381bd..397b409064 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -45,6 +45,7 @@ #include <linux/hwmon-sysfs.h> #include <linux/init.h> #include <linux/input.h> +#include <linux/input/sparse-keymap.h> #include <linux/jiffies.h> #include <linux/kernel.h> #include <linux/kthread.h> @@ -157,16 +158,32 @@ enum { /* HKEY events */ enum tpacpi_hkey_event_t { - /* Hotkey-related */ - TP_HKEY_EV_HOTKEY_BASE = 0x1001, /* first hotkey (FN+F1) */ + /* Original hotkeys */ + TP_HKEY_EV_ORIG_KEY_START = 0x1001, /* First hotkey (FN+F1) */ TP_HKEY_EV_BRGHT_UP = 0x1010, /* Brightness up */ TP_HKEY_EV_BRGHT_DOWN = 0x1011, /* Brightness down */ TP_HKEY_EV_KBD_LIGHT = 0x1012, /* Thinklight/kbd backlight */ TP_HKEY_EV_VOL_UP = 0x1015, /* Volume up or unmute */ TP_HKEY_EV_VOL_DOWN = 0x1016, /* Volume down or unmute */ TP_HKEY_EV_VOL_MUTE = 0x1017, /* Mixer output mute */ + TP_HKEY_EV_ORIG_KEY_END = 0x1020, /* Last original hotkey code */ + + /* Adaptive keyboard (2014 X1 Carbon) */ + TP_HKEY_EV_DFR_CHANGE_ROW = 0x1101, /* Change adaptive kbd Fn row mode */ + TP_HKEY_EV_DFR_S_QUICKVIEW_ROW = 0x1102, /* Set adap. kbd Fn row to function mode */ + TP_HKEY_EV_ADAPTIVE_KEY_START = 0x1103, /* First hotkey code on adaptive kbd */ + TP_HKEY_EV_ADAPTIVE_KEY_END = 0x1116, /* Last hotkey code on adaptive kbd */ + + /* Extended hotkey events in 2017+ models */ + TP_HKEY_EV_EXTENDED_KEY_START = 0x1300, /* First extended hotkey code */ TP_HKEY_EV_PRIVACYGUARD_TOGGLE = 0x130f, /* Toggle priv.guard on/off */ + TP_HKEY_EV_EXTENDED_KEY_END = 0x1319, /* Last extended hotkey code using + * hkey -> scancode translation for + * compat. Later codes are entered + * directly in the sparse-keymap. + */ TP_HKEY_EV_AMT_TOGGLE = 0x131a, /* Toggle AMT on/off */ + TP_HKEY_EV_DOUBLETAP_TOGGLE = 0x131c, /* Toggle trackpoint doubletap on/off */ TP_HKEY_EV_PROFILE_TOGGLE = 0x131f, /* Toggle platform profile */ /* Reasons for waking up from S3/S4 */ @@ -232,6 +249,9 @@ enum tpacpi_hkey_event_t { /* Misc */ TP_HKEY_EV_RFKILL_CHANGED = 0x7000, /* rfkill switch changed */ + + /* Misc2 */ + TP_HKEY_EV_TRACK_DOUBLETAP = 0x8036, /* trackpoint doubletap */ }; /**************************************************************************** @@ -353,6 +373,7 @@ static struct { u32 hotkey_poll_active:1; u32 has_adaptive_kbd:1; u32 kbd_lang:1; + u32 trackpoint_doubletap:1; struct quirk_entry *quirks; } tp_features; @@ -1744,15 +1765,15 @@ enum { /* hot key scan codes (derived from ACPI DSDT) */ TP_ACPI_HOTKEYSCAN_THINKPAD, TP_ACPI_HOTKEYSCAN_UNK1, TP_ACPI_HOTKEYSCAN_UNK2, - TP_ACPI_HOTKEYSCAN_UNK3, + TP_ACPI_HOTKEYSCAN_MICMUTE, TP_ACPI_HOTKEYSCAN_UNK4, - TP_ACPI_HOTKEYSCAN_UNK5, - TP_ACPI_HOTKEYSCAN_UNK6, - TP_ACPI_HOTKEYSCAN_UNK7, - TP_ACPI_HOTKEYSCAN_UNK8, + TP_ACPI_HOTKEYSCAN_CONFIG, + TP_ACPI_HOTKEYSCAN_SEARCH, + TP_ACPI_HOTKEYSCAN_SCALE, + TP_ACPI_HOTKEYSCAN_FILE, /* Adaptive keyboard keycodes */ - TP_ACPI_HOTKEYSCAN_ADAPTIVE_START, + TP_ACPI_HOTKEYSCAN_ADAPTIVE_START, /* 32 / 0x20 */ TP_ACPI_HOTKEYSCAN_MUTE2 = TP_ACPI_HOTKEYSCAN_ADAPTIVE_START, TP_ACPI_HOTKEYSCAN_BRIGHTNESS_ZERO, TP_ACPI_HOTKEYSCAN_CLIPPING_TOOL, @@ -1764,7 +1785,7 @@ enum { /* hot key scan codes (derived from ACPI DSDT) */ TP_ACPI_HOTKEYSCAN_UNK11, TP_ACPI_HOTKEYSCAN_UNK12, TP_ACPI_HOTKEYSCAN_UNK13, - TP_ACPI_HOTKEYSCAN_CONFIG, + TP_ACPI_HOTKEYSCAN_CONFIG2, TP_ACPI_HOTKEYSCAN_NEW_TAB, TP_ACPI_HOTKEYSCAN_RELOAD, TP_ACPI_HOTKEYSCAN_BACK, @@ -1775,7 +1796,7 @@ enum { /* hot key scan codes (derived from ACPI DSDT) */ TP_ACPI_HOTKEYSCAN_ROTATE_DISPLAY, /* Lenovo extended keymap, starting at 0x1300 */ - TP_ACPI_HOTKEYSCAN_EXTENDED_START, + TP_ACPI_HOTKEYSCAN_EXTENDED_START, /* 52 / 0x34 */ /* first new observed key (star, favorites) is 0x1311 */ TP_ACPI_HOTKEYSCAN_STAR = 69, TP_ACPI_HOTKEYSCAN_CLIPPING_TOOL2, @@ -1786,9 +1807,6 @@ enum { /* hot key scan codes (derived from ACPI DSDT) */ TP_ACPI_HOTKEYSCAN_NOTIFICATION_CENTER, TP_ACPI_HOTKEYSCAN_PICKUP_PHONE, TP_ACPI_HOTKEYSCAN_HANGUP_PHONE, - - /* Hotkey keymap size */ - TPACPI_HOTKEY_MAP_LEN }; enum { /* Keys/events available through NVRAM polling */ @@ -1901,10 +1919,7 @@ static u32 hotkey_driver_mask; /* events needed by the driver */ static u32 hotkey_user_mask; /* events visible to userspace */ static u32 hotkey_acpi_mask; /* events enabled in firmware */ -static u16 *hotkey_keycode_map; - -static void tpacpi_driver_event(const unsigned int hkey_event); -static void hotkey_driver_event(const unsigned int scancode); +static bool tpacpi_driver_event(const unsigned int hkey_event); static void hotkey_poll_setup(const bool may_warn); /* HKEY.MHKG() return bits */ @@ -2236,32 +2251,56 @@ static void tpacpi_input_send_tabletsw(void) } } -/* Do NOT call without validating scancode first */ -static void tpacpi_input_send_key(const unsigned int scancode) +static bool tpacpi_input_send_key(const u32 hkey, bool *send_acpi_ev) { - const unsigned int keycode = hotkey_keycode_map[scancode]; - - if (keycode != KEY_RESERVED) { - mutex_lock(&tpacpi_inputdev_send_mutex); + bool known_ev; + u32 scancode; - input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN, scancode); - input_report_key(tpacpi_inputdev, keycode, 1); - input_sync(tpacpi_inputdev); + if (tpacpi_driver_event(hkey)) + return true; - input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN, scancode); - input_report_key(tpacpi_inputdev, keycode, 0); - input_sync(tpacpi_inputdev); + /* + * Before the conversion to using the sparse-keymap helpers the driver used to + * map the hkey event codes to 0x00 - 0x4d scancodes so that a straight scancode + * indexed array could be used to map scancodes to keycodes: + * + * 0x1001 - 0x1020 -> 0x00 - 0x1f (Original ThinkPad events) + * 0x1103 - 0x1116 -> 0x20 - 0x33 (Adaptive keyboard, 2014 X1 Carbon) + * 0x1300 - 0x1319 -> 0x34 - 0x4d (Additional keys send in 2017+ models) + * + * The sparse-keymap tables still use these scancodes for these ranges to + * preserve userspace API compatibility (e.g. hwdb keymappings). + */ + if (hkey >= TP_HKEY_EV_ORIG_KEY_START && + hkey <= TP_HKEY_EV_ORIG_KEY_END) { + scancode = hkey - TP_HKEY_EV_ORIG_KEY_START; + if (!(hotkey_user_mask & (1 << scancode))) + return true; /* Not reported but still a known code */ + } else if (hkey >= TP_HKEY_EV_ADAPTIVE_KEY_START && + hkey <= TP_HKEY_EV_ADAPTIVE_KEY_END) { + scancode = hkey - TP_HKEY_EV_ADAPTIVE_KEY_START + + TP_ACPI_HOTKEYSCAN_ADAPTIVE_START; + } else if (hkey >= TP_HKEY_EV_EXTENDED_KEY_START && + hkey <= TP_HKEY_EV_EXTENDED_KEY_END) { + scancode = hkey - TP_HKEY_EV_EXTENDED_KEY_START + + TP_ACPI_HOTKEYSCAN_EXTENDED_START; + } else { + /* + * Do not send ACPI netlink events for unknown hotkeys, to + * avoid userspace starting to rely on them. Instead these + * should be added to the keymap to send evdev events. + */ + if (send_acpi_ev) + *send_acpi_ev = false; - mutex_unlock(&tpacpi_inputdev_send_mutex); + scancode = hkey; } -} -/* Do NOT call without validating scancode first */ -static void tpacpi_input_send_key_masked(const unsigned int scancode) -{ - hotkey_driver_event(scancode); - if (hotkey_user_mask & (1 << scancode)) - tpacpi_input_send_key(scancode); + mutex_lock(&tpacpi_inputdev_send_mutex); + known_ev = sparse_keymap_report_event(tpacpi_inputdev, scancode, 1, true); + mutex_unlock(&tpacpi_inputdev_send_mutex); + + return known_ev; } #ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL @@ -2270,7 +2309,7 @@ static struct tp_acpi_drv_struct ibm_hotkey_acpidriver; /* Do NOT call without validating scancode first */ static void tpacpi_hotkey_send_key(unsigned int scancode) { - tpacpi_input_send_key_masked(scancode); + tpacpi_input_send_key(TP_HKEY_EV_ORIG_KEY_START + scancode, NULL); } static void hotkey_read_nvram(struct tp_nvram_state *n, const u32 m) @@ -2575,6 +2614,9 @@ static void hotkey_poll_setup_safe(const bool __unused) { } +static void hotkey_poll_stop_sync(void) +{ +} #endif /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */ static int hotkey_inputdev_open(struct input_dev *dev) @@ -2679,7 +2721,7 @@ static ssize_t hotkey_bios_enabled_show(struct device *dev, struct device_attribute *attr, char *buf) { - return sprintf(buf, "0\n"); + return sysfs_emit(buf, "0\n"); } static DEVICE_ATTR_RO(hotkey_bios_enabled); @@ -3045,9 +3087,7 @@ static void tpacpi_send_radiosw_update(void) static void hotkey_exit(void) { mutex_lock(&hotkey_mutex); -#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL hotkey_poll_stop_sync(); -#endif dbg_printk(TPACPI_DBG_EXIT | TPACPI_DBG_HKEY, "restoring original HKEY status and mask\n"); /* yes, there is a bitwise or below, we want the @@ -3060,15 +3100,6 @@ static void hotkey_exit(void) mutex_unlock(&hotkey_mutex); } -static void __init hotkey_unmap(const unsigned int scancode) -{ - if (hotkey_keycode_map[scancode] != KEY_RESERVED) { - clear_bit(hotkey_keycode_map[scancode], - tpacpi_inputdev->keybit); - hotkey_keycode_map[scancode] = KEY_RESERVED; - } -} - /* * HKEY quirks: * TPACPI_HK_Q_INIMASK: Supports FN+F3,FN+F4,FN+F12 @@ -3098,9 +3129,6 @@ static const struct tpacpi_quirk tpacpi_hotkey_qtable[] __initconst = { TPACPI_Q_IBM('1', 'D', TPACPI_HK_Q_INIMASK), /* X22, X23, X24 */ }; -typedef u16 tpacpi_keymap_entry_t; -typedef tpacpi_keymap_entry_t tpacpi_keymap_t[TPACPI_HOTKEY_MAP_LEN]; - static int hotkey_init_tablet_mode(void) { int in_tablet_mode = 0, res; @@ -3137,209 +3165,126 @@ static int hotkey_init_tablet_mode(void) return in_tablet_mode; } -static int __init hotkey_init(struct ibm_init_struct *iibm) -{ - /* Requirements for changing the default keymaps: - * - * 1. Many of the keys are mapped to KEY_RESERVED for very - * good reasons. Do not change them unless you have deep - * knowledge on the IBM and Lenovo ThinkPad firmware for - * the various ThinkPad models. The driver behaves - * differently for KEY_RESERVED: such keys have their - * hot key mask *unset* in mask_recommended, and also - * in the initial hot key mask programmed into the - * firmware at driver load time, which means the firm- - * ware may react very differently if you change them to - * something else; - * - * 2. You must be subscribed to the linux-thinkpad and - * ibm-acpi-devel mailing lists, and you should read the - * list archives since 2007 if you want to change the - * keymaps. This requirement exists so that you will - * know the past history of problems with the thinkpad- - * acpi driver keymaps, and also that you will be - * listening to any bug reports; - * - * 3. Do not send thinkpad-acpi specific patches directly to - * for merging, *ever*. Send them to the linux-acpi - * mailinglist for comments. Merging is to be done only - * through acpi-test and the ACPI maintainer. - * - * If the above is too much to ask, don't change the keymap. - * Ask the thinkpad-acpi maintainer to do it, instead. +static const struct key_entry keymap_ibm[] __initconst = { + /* Original hotkey mappings translated scancodes 0x00 - 0x1f */ + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNF1, { KEY_FN_F1 } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNF2, { KEY_BATTERY } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNF3, { KEY_COFFEE } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNF4, { KEY_SLEEP } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNF5, { KEY_WLAN } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNF6, { KEY_FN_F6 } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNF7, { KEY_SWITCHVIDEOMODE } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNF8, { KEY_FN_F8 } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNF9, { KEY_FN_F9 } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNF10, { KEY_FN_F10 } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNF11, { KEY_FN_F11 } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNF12, { KEY_SUSPEND } }, + /* Brightness: firmware always reacts, suppressed through hotkey_reserved_mask. */ + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNHOME, { KEY_BRIGHTNESSUP } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNEND, { KEY_BRIGHTNESSDOWN } }, + /* Thinklight: firmware always reacts, suppressed through hotkey_reserved_mask. */ + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNPAGEUP, { KEY_KBDILLUMTOGGLE } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNSPACE, { KEY_ZOOM } }, + /* + * Volume: firmware always reacts and reprograms the built-in *extra* mixer. + * Suppressed by default through hotkey_reserved_mask. + */ + { KE_KEY, TP_ACPI_HOTKEYSCAN_VOLUMEUP, { KEY_VOLUMEUP } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_VOLUMEDOWN, { KEY_VOLUMEDOWN } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_MUTE, { KEY_MUTE } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_THINKPAD, { KEY_VENDOR } }, + { KE_END } +}; + +static const struct key_entry keymap_lenovo[] __initconst = { + /* Original hotkey mappings translated scancodes 0x00 - 0x1f */ + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNF1, { KEY_FN_F1 } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNF2, { KEY_COFFEE } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNF3, { KEY_BATTERY } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNF4, { KEY_SLEEP } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNF5, { KEY_WLAN } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNF6, { KEY_CAMERA, } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNF7, { KEY_SWITCHVIDEOMODE } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNF8, { KEY_FN_F8 } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNF9, { KEY_FN_F9 } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNF10, { KEY_FN_F10 } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNF11, { KEY_FN_F11 } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNF12, { KEY_SUSPEND } }, + /* + * These should be enabled --only-- when ACPI video is disabled and + * are handled in a special way by the init code. + */ + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNHOME, { KEY_BRIGHTNESSUP } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNEND, { KEY_BRIGHTNESSDOWN } }, + /* Suppressed by default through hotkey_reserved_mask. */ + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNPAGEUP, { KEY_KBDILLUMTOGGLE } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_FNSPACE, { KEY_ZOOM } }, + /* + * Volume: z60/z61, T60 (BIOS version?): firmware always reacts and + * reprograms the built-in *extra* mixer. + * T60?, T61, R60?, R61: firmware and EC tries to send these over + * the regular keyboard (not through tpacpi). There are still weird bugs + * re. MUTE. May cause the BIOS to interfere with the HDA mixer. + * Suppressed by default through hotkey_reserved_mask. */ + { KE_KEY, TP_ACPI_HOTKEYSCAN_VOLUMEUP, { KEY_VOLUMEUP } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_VOLUMEDOWN, { KEY_VOLUMEDOWN } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_MUTE, { KEY_MUTE } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_THINKPAD, { KEY_VENDOR } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_MICMUTE, { KEY_MICMUTE } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_CONFIG, { KEY_CONFIG } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_SEARCH, { KEY_SEARCH } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_SCALE, { KEY_SCALE } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_FILE, { KEY_FILE } }, + /* Adaptive keyboard mappings for Carbon X1 2014 translated scancodes 0x20 - 0x33 */ + { KE_KEY, TP_ACPI_HOTKEYSCAN_MUTE2, { KEY_RESERVED } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_BRIGHTNESS_ZERO, { KEY_BRIGHTNESS_MIN } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_CLIPPING_TOOL, { KEY_SELECTIVE_SCREENSHOT } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_CLOUD, { KEY_XFER } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_UNK9, { KEY_RESERVED } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_VOICE, { KEY_VOICECOMMAND } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_UNK10, { KEY_RESERVED } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_GESTURES, { KEY_RESERVED } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_UNK11, { KEY_RESERVED } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_UNK12, { KEY_RESERVED } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_UNK13, { KEY_RESERVED } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_CONFIG2, { KEY_CONFIG } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_NEW_TAB, { KEY_RESERVED } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_RELOAD, { KEY_REFRESH } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_BACK, { KEY_BACK } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_MIC_DOWN, { KEY_RESERVED } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_MIC_UP, { KEY_RESERVED } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_MIC_CANCELLATION, { KEY_RESERVED } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_CAMERA_MODE, { KEY_RESERVED } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_ROTATE_DISPLAY, { KEY_RESERVED } }, + /* Extended hotkeys mappings translated scancodes 0x34 - 0x4d */ + { KE_KEY, TP_ACPI_HOTKEYSCAN_STAR, { KEY_BOOKMARKS } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_CLIPPING_TOOL2, { KEY_SELECTIVE_SCREENSHOT } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_CALCULATOR, { KEY_CALC } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_BLUETOOTH, { KEY_BLUETOOTH } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_KEYBOARD, { KEY_KEYBOARD } }, + /* Used by "Lenovo Quick Clean" */ + { KE_KEY, TP_ACPI_HOTKEYSCAN_FN_RIGHT_SHIFT, { KEY_FN_RIGHT_SHIFT } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_NOTIFICATION_CENTER, { KEY_NOTIFICATION_CENTER } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_PICKUP_PHONE, { KEY_PICKUP_PHONE } }, + { KE_KEY, TP_ACPI_HOTKEYSCAN_HANGUP_PHONE, { KEY_HANGUP_PHONE } }, + /* + * All mapping below are for raw untranslated hkey event codes mapped directly + * after switching to sparse keymap support. The mappings above use translated + * scancodes to preserve uAPI compatibility, see tpacpi_input_send_key(). + */ + { KE_KEY, 0x131d, { KEY_VENDOR } }, /* System debug info, similar to old ThinkPad key */ + { KE_KEY, TP_HKEY_EV_TRACK_DOUBLETAP /* 0x8036 */, { KEY_PROG4 } }, + { KE_END } +}; +static int __init hotkey_init(struct ibm_init_struct *iibm) +{ enum keymap_index { TPACPI_KEYMAP_IBM_GENERIC = 0, TPACPI_KEYMAP_LENOVO_GENERIC, }; - static const tpacpi_keymap_t tpacpi_keymaps[] __initconst = { - /* Generic keymap for IBM ThinkPads */ - [TPACPI_KEYMAP_IBM_GENERIC] = { - /* Scan Codes 0x00 to 0x0B: ACPI HKEY FN+F1..F12 */ - KEY_FN_F1, KEY_BATTERY, KEY_COFFEE, KEY_SLEEP, - KEY_WLAN, KEY_FN_F6, KEY_SWITCHVIDEOMODE, KEY_FN_F8, - KEY_FN_F9, KEY_FN_F10, KEY_FN_F11, KEY_SUSPEND, - - /* Scan codes 0x0C to 0x1F: Other ACPI HKEY hot keys */ - KEY_UNKNOWN, /* 0x0C: FN+BACKSPACE */ - KEY_UNKNOWN, /* 0x0D: FN+INSERT */ - KEY_UNKNOWN, /* 0x0E: FN+DELETE */ - - /* brightness: firmware always reacts to them */ - KEY_RESERVED, /* 0x0F: FN+HOME (brightness up) */ - KEY_RESERVED, /* 0x10: FN+END (brightness down) */ - - /* Thinklight: firmware always react to it */ - KEY_RESERVED, /* 0x11: FN+PGUP (thinklight toggle) */ - - KEY_UNKNOWN, /* 0x12: FN+PGDOWN */ - KEY_ZOOM, /* 0x13: FN+SPACE (zoom) */ - - /* Volume: firmware always react to it and reprograms - * the built-in *extra* mixer. Never map it to control - * another mixer by default. */ - KEY_RESERVED, /* 0x14: VOLUME UP */ - KEY_RESERVED, /* 0x15: VOLUME DOWN */ - KEY_RESERVED, /* 0x16: MUTE */ - - KEY_VENDOR, /* 0x17: Thinkpad/AccessIBM/Lenovo */ - - /* (assignments unknown, please report if found) */ - KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, - KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, - - /* No assignments, only used for Adaptive keyboards. */ - KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, - KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, - KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, - KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, - KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, - - /* No assignment, used for newer Lenovo models */ - KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, - KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, - KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, - KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, - KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, - KEY_UNKNOWN, KEY_UNKNOWN - - }, - - /* Generic keymap for Lenovo ThinkPads */ - [TPACPI_KEYMAP_LENOVO_GENERIC] = { - /* Scan Codes 0x00 to 0x0B: ACPI HKEY FN+F1..F12 */ - KEY_FN_F1, KEY_COFFEE, KEY_BATTERY, KEY_SLEEP, - KEY_WLAN, KEY_CAMERA, KEY_SWITCHVIDEOMODE, KEY_FN_F8, - KEY_FN_F9, KEY_FN_F10, KEY_FN_F11, KEY_SUSPEND, - - /* Scan codes 0x0C to 0x1F: Other ACPI HKEY hot keys */ - KEY_UNKNOWN, /* 0x0C: FN+BACKSPACE */ - KEY_UNKNOWN, /* 0x0D: FN+INSERT */ - KEY_UNKNOWN, /* 0x0E: FN+DELETE */ - - /* These should be enabled --only-- when ACPI video - * is disabled (i.e. in "vendor" mode), and are handled - * in a special way by the init code */ - KEY_BRIGHTNESSUP, /* 0x0F: FN+HOME (brightness up) */ - KEY_BRIGHTNESSDOWN, /* 0x10: FN+END (brightness down) */ - - KEY_RESERVED, /* 0x11: FN+PGUP (thinklight toggle) */ - - KEY_UNKNOWN, /* 0x12: FN+PGDOWN */ - KEY_ZOOM, /* 0x13: FN+SPACE (zoom) */ - - /* Volume: z60/z61, T60 (BIOS version?): firmware always - * react to it and reprograms the built-in *extra* mixer. - * Never map it to control another mixer by default. - * - * T60?, T61, R60?, R61: firmware and EC tries to send - * these over the regular keyboard, so these are no-ops, - * but there are still weird bugs re. MUTE, so do not - * change unless you get test reports from all Lenovo - * models. May cause the BIOS to interfere with the - * HDA mixer. - */ - KEY_RESERVED, /* 0x14: VOLUME UP */ - KEY_RESERVED, /* 0x15: VOLUME DOWN */ - KEY_RESERVED, /* 0x16: MUTE */ - - KEY_VENDOR, /* 0x17: Thinkpad/AccessIBM/Lenovo */ - - /* (assignments unknown, please report if found) */ - KEY_UNKNOWN, KEY_UNKNOWN, - - /* - * The mic mute button only sends 0x1a. It does not - * automatically mute the mic or change the mute light. - */ - KEY_MICMUTE, /* 0x1a: Mic mute (since ?400 or so) */ - - /* (assignments unknown, please report if found) */ - KEY_UNKNOWN, - - /* Extra keys in use since the X240 / T440 / T540 */ - KEY_CONFIG, KEY_SEARCH, KEY_SCALE, KEY_FILE, - - /* - * These are the adaptive keyboard keycodes for Carbon X1 2014. - * The first item in this list is the Mute button which is - * emitted with 0x103 through - * adaptive_keyboard_hotkey_notify_hotkey() when the sound - * symbol is held. - * We'll need to offset those by 0x20. - */ - KEY_RESERVED, /* Mute held, 0x103 */ - KEY_BRIGHTNESS_MIN, /* Backlight off */ - KEY_RESERVED, /* Clipping tool */ - KEY_RESERVED, /* Cloud */ - KEY_RESERVED, - KEY_VOICECOMMAND, /* Voice */ - KEY_RESERVED, - KEY_RESERVED, /* Gestures */ - KEY_RESERVED, - KEY_RESERVED, - KEY_RESERVED, - KEY_CONFIG, /* Settings */ - KEY_RESERVED, /* New tab */ - KEY_REFRESH, /* Reload */ - KEY_BACK, /* Back */ - KEY_RESERVED, /* Microphone down */ - KEY_RESERVED, /* Microphone up */ - KEY_RESERVED, /* Microphone cancellation */ - KEY_RESERVED, /* Camera mode */ - KEY_RESERVED, /* Rotate display, 0x116 */ - - /* - * These are found in 2017 models (e.g. T470s, X270). - * The lowest known value is 0x311, which according to - * the manual should launch a user defined favorite - * application. - * - * The offset for these is TP_ACPI_HOTKEYSCAN_EXTENDED_START, - * corresponding to 0x34. - */ - - /* (assignments unknown, please report if found) */ - KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, - KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, - KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, - KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, - KEY_UNKNOWN, - - KEY_BOOKMARKS, /* Favorite app, 0x311 */ - KEY_SELECTIVE_SCREENSHOT, /* Clipping tool */ - KEY_CALC, /* Calculator (above numpad, P52) */ - KEY_BLUETOOTH, /* Bluetooth */ - KEY_KEYBOARD, /* Keyboard, 0x315 */ - KEY_FN_RIGHT_SHIFT, /* Fn + right Shift */ - KEY_NOTIFICATION_CENTER, /* Notification Center */ - KEY_PICKUP_PHONE, /* Answer incoming call */ - KEY_HANGUP_PHONE, /* Decline incoming call */ - }, - }; - static const struct tpacpi_quirk tpacpi_keymap_qtable[] __initconst = { /* Generic maps (fallback) */ { @@ -3354,17 +3299,11 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) }, }; -#define TPACPI_HOTKEY_MAP_SIZE sizeof(tpacpi_keymap_t) -#define TPACPI_HOTKEY_MAP_TYPESIZE sizeof(tpacpi_keymap_entry_t) - - int res, i; - int status; - int hkeyv; + unsigned long keymap_id, quirks; + const struct key_entry *keymap; bool radiosw_state = false; bool tabletsw_state = false; - - unsigned long quirks; - unsigned long keymap_id; + int hkeyv, res, status; vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY, "initializing hotkey subdriver\n"); @@ -3504,30 +3443,29 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) /* Set up key map */ keymap_id = tpacpi_check_quirks(tpacpi_keymap_qtable, ARRAY_SIZE(tpacpi_keymap_qtable)); - BUG_ON(keymap_id >= ARRAY_SIZE(tpacpi_keymaps)); dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY, "using keymap number %lu\n", keymap_id); - hotkey_keycode_map = kmemdup(&tpacpi_keymaps[keymap_id], - TPACPI_HOTKEY_MAP_SIZE, GFP_KERNEL); - if (!hotkey_keycode_map) { - pr_err("failed to allocate memory for key map\n"); - return -ENOMEM; + /* Keys which should be reserved on both IBM and Lenovo models */ + hotkey_reserved_mask = TP_ACPI_HKEY_KBD_LIGHT_MASK | + TP_ACPI_HKEY_VOLUP_MASK | + TP_ACPI_HKEY_VOLDWN_MASK | + TP_ACPI_HKEY_MUTE_MASK; + /* + * Reserve brightness up/down unconditionally on IBM models, on Lenovo + * models these are disabled based on acpi_video_get_backlight_type(). + */ + if (keymap_id == TPACPI_KEYMAP_IBM_GENERIC) { + hotkey_reserved_mask |= TP_ACPI_HKEY_BRGHTUP_MASK | + TP_ACPI_HKEY_BRGHTDWN_MASK; + keymap = keymap_ibm; + } else { + keymap = keymap_lenovo; } - input_set_capability(tpacpi_inputdev, EV_MSC, MSC_SCAN); - tpacpi_inputdev->keycodesize = TPACPI_HOTKEY_MAP_TYPESIZE; - tpacpi_inputdev->keycodemax = TPACPI_HOTKEY_MAP_LEN; - tpacpi_inputdev->keycode = hotkey_keycode_map; - for (i = 0; i < TPACPI_HOTKEY_MAP_LEN; i++) { - if (hotkey_keycode_map[i] != KEY_RESERVED) { - input_set_capability(tpacpi_inputdev, EV_KEY, - hotkey_keycode_map[i]); - } else { - if (i < sizeof(hotkey_reserved_mask)*8) - hotkey_reserved_mask |= 1 << i; - } - } + res = sparse_keymap_setup(tpacpi_inputdev, keymap, NULL); + if (res) + return res; if (tp_features.hotkey_wlsw) { input_set_capability(tpacpi_inputdev, EV_SW, SW_RFKILL_ALL); @@ -3550,11 +3488,8 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) /* Disable brightness up/down on Lenovo thinkpads when * ACPI is handling them, otherwise it is plain impossible * for userspace to do something even remotely sane */ - hotkey_reserved_mask |= - (1 << TP_ACPI_HOTKEYSCAN_FNHOME) - | (1 << TP_ACPI_HOTKEYSCAN_FNEND); - hotkey_unmap(TP_ACPI_HOTKEYSCAN_FNHOME); - hotkey_unmap(TP_ACPI_HOTKEYSCAN_FNEND); + hotkey_reserved_mask |= TP_ACPI_HKEY_BRGHTUP_MASK | + TP_ACPI_HKEY_BRGHTDWN_MASK; } #ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL @@ -3594,6 +3529,9 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) hotkey_poll_setup_safe(true); + /* Enable doubletap by default */ + tp_features.trackpoint_doubletap = 1; + return 0; } @@ -3611,10 +3549,6 @@ static const int adaptive_keyboard_modes[] = { FUNCTION_MODE }; -#define DFR_CHANGE_ROW 0x101 -#define DFR_SHOW_QUICKVIEW_ROW 0x102 -#define FIRST_ADAPTIVE_KEY 0x103 - /* press Fn key a while second, it will switch to Function Mode. Then * release Fn key, previous mode be restored. */ @@ -3665,153 +3599,67 @@ static int adaptive_keyboard_get_next_mode(int mode) return adaptive_keyboard_modes[i]; } -static bool adaptive_keyboard_hotkey_notify_hotkey(unsigned int scancode) +static void adaptive_keyboard_change_row(void) { - int current_mode = 0; - int new_mode = 0; - int keycode; - - switch (scancode) { - case DFR_CHANGE_ROW: - if (adaptive_keyboard_mode_is_saved) { - new_mode = adaptive_keyboard_prev_mode; - adaptive_keyboard_mode_is_saved = false; - } else { - current_mode = adaptive_keyboard_get_mode(); - if (current_mode < 0) - return false; - new_mode = adaptive_keyboard_get_next_mode( - current_mode); - } - - if (adaptive_keyboard_set_mode(new_mode) < 0) - return false; - - return true; - - case DFR_SHOW_QUICKVIEW_ROW: - current_mode = adaptive_keyboard_get_mode(); - if (current_mode < 0) - return false; - - adaptive_keyboard_prev_mode = current_mode; - adaptive_keyboard_mode_is_saved = true; - - if (adaptive_keyboard_set_mode (FUNCTION_MODE) < 0) - return false; - return true; - - default: - if (scancode < FIRST_ADAPTIVE_KEY || - scancode >= FIRST_ADAPTIVE_KEY + - TP_ACPI_HOTKEYSCAN_EXTENDED_START - - TP_ACPI_HOTKEYSCAN_ADAPTIVE_START) { - pr_info("Unhandled adaptive keyboard key: 0x%x\n", - scancode); - return false; - } - keycode = hotkey_keycode_map[scancode - FIRST_ADAPTIVE_KEY + - TP_ACPI_HOTKEYSCAN_ADAPTIVE_START]; - if (keycode != KEY_RESERVED) { - mutex_lock(&tpacpi_inputdev_send_mutex); - - input_report_key(tpacpi_inputdev, keycode, 1); - input_sync(tpacpi_inputdev); - - input_report_key(tpacpi_inputdev, keycode, 0); - input_sync(tpacpi_inputdev); + int mode; - mutex_unlock(&tpacpi_inputdev_send_mutex); - } - return true; + if (adaptive_keyboard_mode_is_saved) { + mode = adaptive_keyboard_prev_mode; + adaptive_keyboard_mode_is_saved = false; + } else { + mode = adaptive_keyboard_get_mode(); + if (mode < 0) + return; + mode = adaptive_keyboard_get_next_mode(mode); } + + adaptive_keyboard_set_mode(mode); } -static bool hotkey_notify_extended_hotkey(const u32 hkey) +static void adaptive_keyboard_s_quickview_row(void) { - unsigned int scancode; + int mode; - switch (hkey) { - case TP_HKEY_EV_PRIVACYGUARD_TOGGLE: - case TP_HKEY_EV_AMT_TOGGLE: - case TP_HKEY_EV_PROFILE_TOGGLE: - tpacpi_driver_event(hkey); - return true; - } + mode = adaptive_keyboard_get_mode(); + if (mode < 0) + return; - /* Extended keycodes start at 0x300 and our offset into the map - * TP_ACPI_HOTKEYSCAN_EXTENDED_START. The calculated scancode - * will be positive, but might not be in the correct range. - */ - scancode = (hkey & 0xfff) - (0x300 - TP_ACPI_HOTKEYSCAN_EXTENDED_START); - if (scancode >= TP_ACPI_HOTKEYSCAN_EXTENDED_START && - scancode < TPACPI_HOTKEY_MAP_LEN) { - tpacpi_input_send_key(scancode); - return true; - } + adaptive_keyboard_prev_mode = mode; + adaptive_keyboard_mode_is_saved = true; - return false; + adaptive_keyboard_set_mode(FUNCTION_MODE); } -static bool hotkey_notify_hotkey(const u32 hkey, - bool *send_acpi_ev, - bool *ignore_acpi_ev) +/* 0x1000-0x1FFF: key presses */ +static bool hotkey_notify_hotkey(const u32 hkey, bool *send_acpi_ev) { - /* 0x1000-0x1FFF: key presses */ - unsigned int scancode = hkey & 0xfff; - *send_acpi_ev = true; - *ignore_acpi_ev = false; + /* Never send ACPI netlink events for original hotkeys (hkey: 0x1001 - 0x1020) */ + if (hkey >= TP_HKEY_EV_ORIG_KEY_START && hkey <= TP_HKEY_EV_ORIG_KEY_END) { + *send_acpi_ev = false; - /* - * Original events are in the 0x10XX range, the adaptive keyboard - * found in 2014 X1 Carbon emits events are of 0x11XX. In 2017 - * models, additional keys are emitted through 0x13XX. - */ - switch ((hkey >> 8) & 0xf) { - case 0: - if (scancode > 0 && - scancode <= TP_ACPI_HOTKEYSCAN_ADAPTIVE_START) { - /* HKEY event 0x1001 is scancode 0x00 */ - scancode--; - if (!(hotkey_source_mask & (1 << scancode))) { - tpacpi_input_send_key_masked(scancode); - *send_acpi_ev = false; - } else { - *ignore_acpi_ev = true; - } + /* Original hotkeys may be polled from NVRAM instead */ + unsigned int scancode = hkey - TP_HKEY_EV_ORIG_KEY_START; + if (hotkey_source_mask & (1 << scancode)) return true; - } - break; - - case 1: - return adaptive_keyboard_hotkey_notify_hotkey(scancode); - - case 3: - return hotkey_notify_extended_hotkey(hkey); } - return false; + return tpacpi_input_send_key(hkey, send_acpi_ev); } -static bool hotkey_notify_wakeup(const u32 hkey, - bool *send_acpi_ev, - bool *ignore_acpi_ev) +/* 0x2000-0x2FFF: Wakeup reason */ +static bool hotkey_notify_wakeup(const u32 hkey, bool *send_acpi_ev) { - /* 0x2000-0x2FFF: Wakeup reason */ - *send_acpi_ev = true; - *ignore_acpi_ev = false; - switch (hkey) { case TP_HKEY_EV_WKUP_S3_UNDOCK: /* suspend, undock */ case TP_HKEY_EV_WKUP_S4_UNDOCK: /* hibernation, undock */ hotkey_wakeup_reason = TP_ACPI_WAKEUP_UNDOCK; - *ignore_acpi_ev = true; + *send_acpi_ev = false; break; case TP_HKEY_EV_WKUP_S3_BAYEJ: /* suspend, bay eject */ case TP_HKEY_EV_WKUP_S4_BAYEJ: /* hibernation, bay eject */ hotkey_wakeup_reason = TP_ACPI_WAKEUP_BAYEJ; - *ignore_acpi_ev = true; + *send_acpi_ev = false; break; case TP_HKEY_EV_WKUP_S3_BATLOW: /* Battery on critical low level/S3 */ @@ -3833,14 +3681,9 @@ static bool hotkey_notify_wakeup(const u32 hkey, return true; } -static bool hotkey_notify_dockevent(const u32 hkey, - bool *send_acpi_ev, - bool *ignore_acpi_ev) +/* 0x4000-0x4FFF: dock-related events */ +static bool hotkey_notify_dockevent(const u32 hkey, bool *send_acpi_ev) { - /* 0x4000-0x4FFF: dock-related events */ - *send_acpi_ev = true; - *ignore_acpi_ev = false; - switch (hkey) { case TP_HKEY_EV_UNDOCK_ACK: /* ACPI undock operation completed after wakeup */ @@ -3870,7 +3713,6 @@ static bool hotkey_notify_dockevent(const u32 hkey, case TP_HKEY_EV_KBD_COVER_ATTACH: case TP_HKEY_EV_KBD_COVER_DETACH: *send_acpi_ev = false; - *ignore_acpi_ev = true; return true; default: @@ -3878,14 +3720,9 @@ static bool hotkey_notify_dockevent(const u32 hkey, } } -static bool hotkey_notify_usrevent(const u32 hkey, - bool *send_acpi_ev, - bool *ignore_acpi_ev) +/* 0x5000-0x5FFF: human interface helpers */ +static bool hotkey_notify_usrevent(const u32 hkey, bool *send_acpi_ev) { - /* 0x5000-0x5FFF: human interface helpers */ - *send_acpi_ev = true; - *ignore_acpi_ev = false; - switch (hkey) { case TP_HKEY_EV_PEN_INSERTED: /* X61t: tablet pen inserted into bay */ case TP_HKEY_EV_PEN_REMOVED: /* X61t: tablet pen removed from bay */ @@ -3902,7 +3739,7 @@ static bool hotkey_notify_usrevent(const u32 hkey, case TP_HKEY_EV_LID_OPEN: /* Lid opened */ case TP_HKEY_EV_BRGHT_CHANGED: /* brightness changed */ /* do not propagate these events */ - *ignore_acpi_ev = true; + *send_acpi_ev = false; return true; default: @@ -3913,14 +3750,9 @@ static bool hotkey_notify_usrevent(const u32 hkey, static void thermal_dump_all_sensors(void); static void palmsensor_refresh(void); -static bool hotkey_notify_6xxx(const u32 hkey, - bool *send_acpi_ev, - bool *ignore_acpi_ev) +/* 0x6000-0x6FFF: thermal alarms/notices and keyboard events */ +static bool hotkey_notify_6xxx(const u32 hkey, bool *send_acpi_ev) { - /* 0x6000-0x6FFF: thermal alarms/notices and keyboard events */ - *send_acpi_ev = true; - *ignore_acpi_ev = false; - switch (hkey) { case TP_HKEY_EV_THM_TABLE_CHANGED: pr_debug("EC reports: Thermal Table has changed\n"); @@ -3966,14 +3798,12 @@ static bool hotkey_notify_6xxx(const u32 hkey, /* key press events, we just ignore them as long as the EC * is still reporting them in the normal keyboard stream */ *send_acpi_ev = false; - *ignore_acpi_ev = true; return true; case TP_HKEY_EV_KEY_FN_ESC: /* Get the media key status to force the status LED to update */ acpi_evalf(hkey_handle, NULL, "GMKS", "v"); *send_acpi_ev = false; - *ignore_acpi_ev = true; return true; case TP_HKEY_EV_TABLET_CHANGED: @@ -3997,11 +3827,23 @@ static bool hotkey_notify_6xxx(const u32 hkey, return true; } +static bool hotkey_notify_8xxx(const u32 hkey, bool *send_acpi_ev) +{ + switch (hkey) { + case TP_HKEY_EV_TRACK_DOUBLETAP: + if (tp_features.trackpoint_doubletap) + tpacpi_input_send_key(hkey, send_acpi_ev); + + return true; + default: + return false; + } +} + static void hotkey_notify(struct ibm_struct *ibm, u32 event) { u32 hkey; bool send_acpi_ev; - bool ignore_acpi_ev; bool known_ev; if (event != 0x80) { @@ -4026,18 +3868,16 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) } send_acpi_ev = true; - ignore_acpi_ev = false; + known_ev = false; switch (hkey >> 12) { case 1: /* 0x1000-0x1FFF: key presses */ - known_ev = hotkey_notify_hotkey(hkey, &send_acpi_ev, - &ignore_acpi_ev); + known_ev = hotkey_notify_hotkey(hkey, &send_acpi_ev); break; case 2: /* 0x2000-0x2FFF: Wakeup reason */ - known_ev = hotkey_notify_wakeup(hkey, &send_acpi_ev, - &ignore_acpi_ev); + known_ev = hotkey_notify_wakeup(hkey, &send_acpi_ev); break; case 3: /* 0x3000-0x3FFF: bay-related wakeups */ @@ -4052,38 +3892,34 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) /* FIXME: kick libata if SATA link offline */ known_ev = true; break; - default: - known_ev = false; } break; case 4: /* 0x4000-0x4FFF: dock-related events */ - known_ev = hotkey_notify_dockevent(hkey, &send_acpi_ev, - &ignore_acpi_ev); + known_ev = hotkey_notify_dockevent(hkey, &send_acpi_ev); break; case 5: /* 0x5000-0x5FFF: human interface helpers */ - known_ev = hotkey_notify_usrevent(hkey, &send_acpi_ev, - &ignore_acpi_ev); + known_ev = hotkey_notify_usrevent(hkey, &send_acpi_ev); break; case 6: /* 0x6000-0x6FFF: thermal alarms/notices and * keyboard events */ - known_ev = hotkey_notify_6xxx(hkey, &send_acpi_ev, - &ignore_acpi_ev); + known_ev = hotkey_notify_6xxx(hkey, &send_acpi_ev); break; case 7: /* 0x7000-0x7FFF: misc */ if (tp_features.hotkey_wlsw && hkey == TP_HKEY_EV_RFKILL_CHANGED) { tpacpi_send_radiosw_update(); - send_acpi_ev = 0; + send_acpi_ev = false; known_ev = true; - break; } - fallthrough; /* to default */ - default: - known_ev = false; + break; + case 8: + /* 0x8000-0x8FFF: misc2 */ + known_ev = hotkey_notify_8xxx(hkey, &send_acpi_ev); + break; } if (!known_ev) { pr_notice("unhandled HKEY event 0x%04x\n", hkey); @@ -4092,7 +3928,7 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) } /* netlink events */ - if (!ignore_acpi_ev && send_acpi_ev) { + if (send_acpi_ev) { acpi_bus_generate_netlink_event( ibm->acpi->device->pnp.device_class, dev_name(&ibm->acpi->device->dev), @@ -9790,7 +9626,7 @@ static ssize_t tpacpi_battery_show(int what, battery = BAT_PRIMARY; if (tpacpi_battery_get(what, battery, &ret)) return -ENODEV; - return sprintf(buf, "%d\n", ret); + return sysfs_emit(buf, "%d\n", ret); } static ssize_t charge_control_start_threshold_show(struct device *device, @@ -10992,13 +10828,7 @@ static struct ibm_struct auxmac_data = { .name = "auxmac", }; -static ssize_t auxmac_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - return sysfs_emit(buf, "%s\n", auxmac); -} -static DEVICE_ATTR_RO(auxmac); +static DEVICE_STRING_ATTR_RO(auxmac, 0444, auxmac); static umode_t auxmac_attr_is_visible(struct kobject *kobj, struct attribute *attr, int n) @@ -11007,7 +10837,7 @@ static umode_t auxmac_attr_is_visible(struct kobject *kobj, } static struct attribute *auxmac_attributes[] = { - &dev_attr_auxmac.attr, + &dev_attr_auxmac.attr.attr, NULL }; @@ -11127,92 +10957,93 @@ static struct platform_driver tpacpi_hwmon_pdriver = { * HKEY event callout for other subdrivers go here * (yes, it is ugly, but it is quick, safe, and gets the job done */ -static void tpacpi_driver_event(const unsigned int hkey_event) +static bool tpacpi_driver_event(const unsigned int hkey_event) { - if (ibm_backlight_device) { - switch (hkey_event) { - case TP_HKEY_EV_BRGHT_UP: - case TP_HKEY_EV_BRGHT_DOWN: + switch (hkey_event) { + case TP_HKEY_EV_BRGHT_UP: + case TP_HKEY_EV_BRGHT_DOWN: + if (ibm_backlight_device) tpacpi_brightness_notify_change(); - } - } - if (alsa_card) { - switch (hkey_event) { - case TP_HKEY_EV_VOL_UP: - case TP_HKEY_EV_VOL_DOWN: - case TP_HKEY_EV_VOL_MUTE: + /* + * Key press events are suppressed by default hotkey_user_mask + * and should still be reported if explicitly requested. + */ + return false; + case TP_HKEY_EV_VOL_UP: + case TP_HKEY_EV_VOL_DOWN: + case TP_HKEY_EV_VOL_MUTE: + if (alsa_card) volume_alsa_notify_change(); - } - } - if (tp_features.kbdlight && hkey_event == TP_HKEY_EV_KBD_LIGHT) { - enum led_brightness brightness; - mutex_lock(&kbdlight_mutex); + /* Key events are suppressed by default hotkey_user_mask */ + return false; + case TP_HKEY_EV_KBD_LIGHT: + if (tp_features.kbdlight) { + enum led_brightness brightness; - /* - * Check the brightness actually changed, setting the brightness - * through kbdlight_set_level() also triggers this event. - */ - brightness = kbdlight_sysfs_get(NULL); - if (kbdlight_brightness != brightness) { - kbdlight_brightness = brightness; - led_classdev_notify_brightness_hw_changed( - &tpacpi_led_kbdlight.led_classdev, brightness); - } + mutex_lock(&kbdlight_mutex); - mutex_unlock(&kbdlight_mutex); - } + /* + * Check the brightness actually changed, setting the brightness + * through kbdlight_set_level() also triggers this event. + */ + brightness = kbdlight_sysfs_get(NULL); + if (kbdlight_brightness != brightness) { + kbdlight_brightness = brightness; + led_classdev_notify_brightness_hw_changed( + &tpacpi_led_kbdlight.led_classdev, brightness); + } - if (hkey_event == TP_HKEY_EV_THM_CSM_COMPLETED) { + mutex_unlock(&kbdlight_mutex); + } + /* Key events are suppressed by default hotkey_user_mask */ + return false; + case TP_HKEY_EV_DFR_CHANGE_ROW: + adaptive_keyboard_change_row(); + return true; + case TP_HKEY_EV_DFR_S_QUICKVIEW_ROW: + adaptive_keyboard_s_quickview_row(); + return true; + case TP_HKEY_EV_THM_CSM_COMPLETED: lapsensor_refresh(); /* If we are already accessing DYTC then skip dytc update */ if (!atomic_add_unless(&dytc_ignore_event, -1, 0)) dytc_profile_refresh(); - } - - if (lcdshadow_dev && hkey_event == TP_HKEY_EV_PRIVACYGUARD_TOGGLE) { - enum drm_privacy_screen_status old_hw_state; - bool changed; - mutex_lock(&lcdshadow_dev->lock); - old_hw_state = lcdshadow_dev->hw_state; - lcdshadow_get_hw_state(lcdshadow_dev); - changed = lcdshadow_dev->hw_state != old_hw_state; - mutex_unlock(&lcdshadow_dev->lock); - - if (changed) - drm_privacy_screen_call_notifier_chain(lcdshadow_dev); - } - if (hkey_event == TP_HKEY_EV_AMT_TOGGLE) { + return true; + case TP_HKEY_EV_PRIVACYGUARD_TOGGLE: + if (lcdshadow_dev) { + enum drm_privacy_screen_status old_hw_state; + bool changed; + + mutex_lock(&lcdshadow_dev->lock); + old_hw_state = lcdshadow_dev->hw_state; + lcdshadow_get_hw_state(lcdshadow_dev); + changed = lcdshadow_dev->hw_state != old_hw_state; + mutex_unlock(&lcdshadow_dev->lock); + + if (changed) + drm_privacy_screen_call_notifier_chain(lcdshadow_dev); + } + return true; + case TP_HKEY_EV_AMT_TOGGLE: /* If we're enabling AMT we need to force balanced mode */ if (!dytc_amt_active) /* This will also set AMT mode enabled */ dytc_profile_set(NULL, PLATFORM_PROFILE_BALANCED); else dytc_control_amt(!dytc_amt_active); + + return true; + case TP_HKEY_EV_DOUBLETAP_TOGGLE: + tp_features.trackpoint_doubletap = !tp_features.trackpoint_doubletap; + return true; + case TP_HKEY_EV_PROFILE_TOGGLE: + platform_profile_cycle(); + return true; } - if (hkey_event == TP_HKEY_EV_PROFILE_TOGGLE) { - switch (dytc_current_profile) { - case PLATFORM_PROFILE_LOW_POWER: - dytc_profile_set(NULL, PLATFORM_PROFILE_BALANCED); - break; - case PLATFORM_PROFILE_BALANCED: - dytc_profile_set(NULL, PLATFORM_PROFILE_PERFORMANCE); - break; - case PLATFORM_PROFILE_PERFORMANCE: - dytc_profile_set(NULL, PLATFORM_PROFILE_LOW_POWER); - break; - default: - pr_warn("Profile HKEY unexpected profile %d", dytc_current_profile); - } - /* Notify user space the profile changed */ - platform_profile_notify(); - } -} -static void hotkey_driver_event(const unsigned int scancode) -{ - tpacpi_driver_event(TP_HKEY_EV_HOTKEY_BASE + scancode); + return false; } /* --------------------------------------------------------------------- */ @@ -11815,7 +11646,6 @@ static void thinkpad_acpi_module_exit(void) input_unregister_device(tpacpi_inputdev); else input_free_device(tpacpi_inputdev); - kfree(hotkey_keycode_map); } if (tpacpi_sensors_pdev) diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index 5574cea0c2..78a5aac2dc 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -1821,12 +1821,7 @@ static DECLARE_WORK(kbd_bl_work, toshiba_acpi_kbd_bl_work); /* * Sysfs files */ -static ssize_t version_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - return sprintf(buf, "%s\n", TOSHIBA_ACPI_VERSION); -} -static DEVICE_ATTR_RO(version); +static DEVICE_STRING_ATTR_RO(version, 0444, TOSHIBA_ACPI_VERSION); static ssize_t fan_store(struct device *dev, struct device_attribute *attr, @@ -2435,7 +2430,7 @@ static ssize_t cooling_method_store(struct device *dev, static DEVICE_ATTR_RW(cooling_method); static struct attribute *toshiba_attributes[] = { - &dev_attr_version.attr, + &dev_attr_version.attr.attr, &dev_attr_fan.attr, &dev_attr_kbd_backlight_mode.attr, &dev_attr_kbd_type.attr, @@ -3602,7 +3597,6 @@ static SIMPLE_DEV_PM_OPS(toshiba_acpi_pm, static struct acpi_driver toshiba_acpi_driver = { .name = "Toshiba ACPI driver", - .owner = THIS_MODULE, .ids = toshiba_device_ids, .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS, .ops = { diff --git a/drivers/platform/x86/toshiba_bluetooth.c b/drivers/platform/x86/toshiba_bluetooth.c index d8f81962a2..dad2c3e559 100644 --- a/drivers/platform/x86/toshiba_bluetooth.c +++ b/drivers/platform/x86/toshiba_bluetooth.c @@ -59,7 +59,6 @@ static struct acpi_driver toshiba_bt_rfkill_driver = { .remove = toshiba_bt_rfkill_remove, .notify = toshiba_bt_rfkill_notify, }, - .owner = THIS_MODULE, .drv.pm = &toshiba_bt_pm, }; diff --git a/drivers/platform/x86/toshiba_haps.c b/drivers/platform/x86/toshiba_haps.c index 8c9f76286b..03dfddeee0 100644 --- a/drivers/platform/x86/toshiba_haps.c +++ b/drivers/platform/x86/toshiba_haps.c @@ -251,7 +251,6 @@ MODULE_DEVICE_TABLE(acpi, haps_device_ids); static struct acpi_driver toshiba_haps_driver = { .name = "Toshiba HAPS", - .owner = THIS_MODULE, .ids = haps_device_ids, .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS, .ops = { diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c index 89e1be0815..f74af0a689 100644 --- a/drivers/platform/x86/touchscreen_dmi.c +++ b/drivers/platform/x86/touchscreen_dmi.c @@ -9,10 +9,13 @@ */ #include <linux/acpi.h> +#include <linux/ctype.h> #include <linux/device.h> #include <linux/dmi.h> #include <linux/efi_embedded_fw.h> #include <linux/i2c.h> +#include <linux/init.h> +#include <linux/kstrtox.h> #include <linux/notifier.h> #include <linux/property.h> #include <linux/string.h> @@ -31,7 +34,6 @@ static const struct property_entry archos_101_cesium_educ_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1280), PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-archos-101-cesium-educ.fw"), { } @@ -46,7 +48,6 @@ static const struct property_entry bush_bush_windows_tablet_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1850), PROPERTY_ENTRY_U32("touchscreen-size-y", 1280), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-bush-bush-windows-tablet.fw"), { } @@ -76,7 +77,6 @@ static const struct property_entry chuwi_hi8_air_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1148), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3676-chuwi-hi8-air.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), { } }; @@ -92,7 +92,6 @@ static const struct property_entry chuwi_hi8_pro_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1148), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-chuwi-hi8-pro.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -120,7 +119,6 @@ static const struct property_entry chuwi_hi10_air_props[] = { PROPERTY_ENTRY_U32("touchscreen-fuzz-x", 5), PROPERTY_ENTRY_U32("touchscreen-fuzz-y", 4), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hi10-air.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -136,7 +134,6 @@ static const struct property_entry chuwi_hi10_plus_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1908), PROPERTY_ENTRY_U32("touchscreen-size-y", 1270), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hi10plus.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), PROPERTY_ENTRY_BOOL("silead,pen-supported"), PROPERTY_ENTRY_U32("silead,pen-resolution-x", 8), @@ -168,7 +165,6 @@ static const struct property_entry chuwi_hi10_pro_props[] = { PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hi10-pro.fw"), PROPERTY_ENTRY_U32_ARRAY("silead,efi-fw-min-max", chuwi_hi10_pro_efi_min_max), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), PROPERTY_ENTRY_BOOL("silead,pen-supported"), PROPERTY_ENTRY_U32("silead,pen-resolution-x", 8), @@ -198,7 +194,6 @@ static const struct property_entry chuwi_hibook_props[] = { PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hibook.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -224,7 +219,6 @@ static const struct property_entry chuwi_vi8_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1140), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3676-chuwi-vi8.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -252,7 +246,6 @@ static const struct property_entry chuwi_vi10_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1858), PROPERTY_ENTRY_U32("touchscreen-size-y", 1280), PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-chuwi-vi10.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -268,7 +261,6 @@ static const struct property_entry chuwi_surbook_mini_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 2040), PROPERTY_ENTRY_U32("touchscreen-size-y", 1524), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-surbook-mini.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), { } }; @@ -286,7 +278,6 @@ static const struct property_entry connect_tablet9_props[] = { PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-connect-tablet9.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), { } }; @@ -303,7 +294,6 @@ static const struct property_entry csl_panther_tab_hd_props[] = { PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-csl-panther-tab-hd.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), { } }; @@ -319,7 +309,6 @@ static const struct property_entry cube_iwork8_air_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 896), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3670-cube-iwork8-air.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), { } }; @@ -343,7 +332,6 @@ static const struct property_entry cube_knote_i1101_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1961), PROPERTY_ENTRY_U32("touchscreen-size-y", 1513), PROPERTY_ENTRY_STRING("firmware-name", "gsl3692-cube-knote-i1101.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -357,7 +345,6 @@ static const struct property_entry dexp_ursus_7w_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 890), PROPERTY_ENTRY_U32("touchscreen-size-y", 630), PROPERTY_ENTRY_STRING("firmware-name", "gsl1686-dexp-ursus-7w.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -373,7 +360,6 @@ static const struct property_entry dexp_ursus_kx210i_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1720), PROPERTY_ENTRY_U32("touchscreen-size-y", 1137), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-dexp-ursus-kx210i.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -388,7 +374,6 @@ static const struct property_entry digma_citi_e200_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1500), PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1686-digma_citi_e200.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -447,7 +432,6 @@ static const struct property_entry irbis_tw90_props[] = { PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-irbis_tw90.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -463,7 +447,6 @@ static const struct property_entry irbis_tw118_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1960), PROPERTY_ENTRY_U32("touchscreen-size-y", 1510), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-irbis-tw118.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), { } }; @@ -480,7 +463,6 @@ static const struct property_entry itworks_tw891_props[] = { PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3670-itworks-tw891.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), { } }; @@ -493,7 +475,6 @@ static const struct property_entry jumper_ezpad_6_pro_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1980), PROPERTY_ENTRY_U32("touchscreen-size-y", 1500), PROPERTY_ENTRY_STRING("firmware-name", "gsl3692-jumper-ezpad-6-pro.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -508,7 +489,6 @@ static const struct property_entry jumper_ezpad_6_pro_b_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1500), PROPERTY_ENTRY_STRING("firmware-name", "gsl3692-jumper-ezpad-6-pro-b.fw"), PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -524,7 +504,6 @@ static const struct property_entry jumper_ezpad_6_m4_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1950), PROPERTY_ENTRY_U32("touchscreen-size-y", 1525), PROPERTY_ENTRY_STRING("firmware-name", "gsl3692-jumper-ezpad-6-m4.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -541,7 +520,6 @@ static const struct property_entry jumper_ezpad_7_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1526), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-jumper-ezpad-7.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,stuck-controller-bug"), { } }; @@ -558,7 +536,6 @@ static const struct property_entry jumper_ezpad_mini3_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1138), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3676-jumper-ezpad-mini3.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), { } }; @@ -575,7 +552,6 @@ static const struct property_entry mpman_converter9_props[] = { PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-mpman-converter9.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), { } }; @@ -591,7 +567,6 @@ static const struct property_entry mpman_mpwin895cl_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1150), PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-mpman-mpwin895cl.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -608,7 +583,6 @@ static const struct property_entry myria_my8307_props[] = { PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-myria-my8307.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -625,7 +599,6 @@ static const struct property_entry onda_obook_20_plus_props[] = { PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3676-onda-obook-20-plus.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -642,7 +615,6 @@ static const struct property_entry onda_v80_plus_v3_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1140), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3676-onda-v80-plus-v3.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -666,7 +638,6 @@ static const struct property_entry onda_v820w_32g_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1140), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-onda-v820w-32g.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -684,7 +655,6 @@ static const struct property_entry onda_v891_v5_props[] = { PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3676-onda-v891-v5.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -700,7 +670,6 @@ static const struct property_entry onda_v891w_v1_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1676), PROPERTY_ENTRY_U32("touchscreen-size-y", 1130), PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-onda-v891w-v1.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -717,7 +686,6 @@ static const struct property_entry onda_v891w_v3_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1135), PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3676-onda-v891w-v3.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -756,7 +724,6 @@ static const struct property_entry pipo_w11_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1984), PROPERTY_ENTRY_U32("touchscreen-size-y", 1532), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-pipo-w11.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -772,7 +739,6 @@ static const struct property_entry positivo_c4128b_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1915), PROPERTY_ENTRY_U32("touchscreen-size-y", 1269), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-positivo-c4128b.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), { } }; @@ -788,7 +754,6 @@ static const struct property_entry pov_mobii_wintab_p800w_v20_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1146), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-pov-mobii-wintab-p800w-v20.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -805,7 +770,6 @@ static const struct property_entry pov_mobii_wintab_p800w_v21_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1148), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3692-pov-mobii-wintab-p800w.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -822,7 +786,6 @@ static const struct property_entry pov_mobii_wintab_p1006w_v10_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1520), PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3692-pov-mobii-wintab-p1006w-v10.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -839,7 +802,6 @@ static const struct property_entry predia_basic_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1144), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-predia-basic.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -856,7 +818,6 @@ static const struct property_entry rca_cambio_w101_v2_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 874), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-rca-cambio-w101-v2.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), { } }; @@ -871,7 +832,6 @@ static const struct property_entry rwc_nanote_p8_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1140), PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-rwc-nanote-p8.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), { } }; @@ -887,7 +847,6 @@ static const struct property_entry schneider_sct101ctm_props[] = { PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-schneider-sct101ctm.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -903,7 +862,6 @@ static const struct property_entry globalspace_solt_ivw116_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1723), PROPERTY_ENTRY_U32("touchscreen-size-y", 1077), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-globalspace-solt-ivw116.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -920,7 +878,6 @@ static const struct property_entry techbite_arc_11_6_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1270), PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-techbite-arc-11-6.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), { } }; @@ -936,7 +893,6 @@ static const struct property_entry teclast_tbook11_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1264), PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3692-teclast-tbook11.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -962,7 +918,6 @@ static const struct property_entry teclast_x16_plus_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1264), PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3692-teclast-x16-plus.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -985,7 +940,6 @@ static const struct property_entry teclast_x3_plus_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1980), PROPERTY_ENTRY_U32("touchscreen-size-y", 1500), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-teclast-x3-plus.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -1001,7 +955,6 @@ static const struct property_entry teclast_x98plus2_props[] = { PROPERTY_ENTRY_BOOL("touchscreen-inverted-x"), PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1686-teclast_x98plus2.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), { } }; @@ -1015,7 +968,6 @@ static const struct property_entry trekstor_primebook_c11_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1530), PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-trekstor-primebook-c11.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -1029,7 +981,6 @@ static const struct property_entry trekstor_primebook_c13_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 2624), PROPERTY_ENTRY_U32("touchscreen-size-y", 1920), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-trekstor-primebook-c13.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -1043,7 +994,6 @@ static const struct property_entry trekstor_primetab_t13b_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 2500), PROPERTY_ENTRY_U32("touchscreen-size-y", 1900), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-trekstor-primetab-t13b.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), { } @@ -1071,7 +1021,6 @@ static const struct property_entry trekstor_surftab_twin_10_1_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1280), PROPERTY_ENTRY_U32("touchscreen-inverted-y", 1), PROPERTY_ENTRY_STRING("firmware-name", "gsl3670-surftab-twin-10-1-st10432-8.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -1087,7 +1036,6 @@ static const struct property_entry trekstor_surftab_wintron70_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 884), PROPERTY_ENTRY_U32("touchscreen-size-y", 632), PROPERTY_ENTRY_STRING("firmware-name", "gsl1686-surftab-wintron70-st70416-6.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -1104,7 +1052,6 @@ static const struct property_entry viglen_connect_10_props[] = { PROPERTY_ENTRY_U32("touchscreen-fuzz-y", 6), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-viglen-connect-10.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -1118,7 +1065,6 @@ static const struct property_entry vinga_twizzle_j116_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1920), PROPERTY_ENTRY_U32("touchscreen-size-y", 1280), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-vinga-twizzle_j116.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -1853,7 +1799,7 @@ const struct dmi_system_id touchscreen_dmi_table[] = { { } }; -static const struct ts_dmi_data *ts_data; +static struct ts_dmi_data *ts_data; static void ts_dmi_add_props(struct i2c_client *client) { @@ -1888,6 +1834,64 @@ static int ts_dmi_notifier_call(struct notifier_block *nb, return 0; } +#define MAX_CMDLINE_PROPS 16 + +static struct property_entry ts_cmdline_props[MAX_CMDLINE_PROPS + 1]; + +static struct ts_dmi_data ts_cmdline_data = { + .properties = ts_cmdline_props, +}; + +static int __init ts_parse_props(char *str) +{ + /* Save the original str to show it on syntax errors */ + char orig_str[256]; + char *name, *value; + u32 u32val; + int i, ret; + + strscpy(orig_str, str); + + /* + * str is part of the static_command_line from init/main.c and poking + * holes in that by writing 0 to it is allowed, as is taking long + * lasting references to it. + */ + ts_cmdline_data.acpi_name = strsep(&str, ":"); + + for (i = 0; i < MAX_CMDLINE_PROPS; i++) { + name = strsep(&str, ":"); + if (!name || !name[0]) + break; + + /* Replace '=' with 0 and make value point past '=' or NULL */ + value = name; + strsep(&value, "="); + if (!value) { + ts_cmdline_props[i] = PROPERTY_ENTRY_BOOL(name); + } else if (isdigit(value[0])) { + ret = kstrtou32(value, 0, &u32val); + if (ret) + goto syntax_error; + + ts_cmdline_props[i] = PROPERTY_ENTRY_U32(name, u32val); + } else { + ts_cmdline_props[i] = PROPERTY_ENTRY_STRING(name, value); + } + } + + if (!i || str) + goto syntax_error; + + ts_data = &ts_cmdline_data; + return 1; + +syntax_error: + pr_err("Invalid '%s' value for 'i2c_touchscreen_props='\n", orig_str); + return 1; /* "i2c_touchscreen_props=" is still a known parameter */ +} +__setup("i2c_touchscreen_props=", ts_parse_props); + static struct notifier_block ts_dmi_notifier = { .notifier_call = ts_dmi_notifier_call, }; @@ -1895,13 +1899,25 @@ static struct notifier_block ts_dmi_notifier = { static int __init ts_dmi_init(void) { const struct dmi_system_id *dmi_id; + struct ts_dmi_data *ts_data_dmi; int error; dmi_id = dmi_first_match(touchscreen_dmi_table); - if (!dmi_id) + ts_data_dmi = dmi_id ? dmi_id->driver_data : NULL; + + if (ts_data) { + /* + * Kernel cmdline provided data takes precedence, copy over + * DMI efi_embedded_fw info if available. + */ + if (ts_data_dmi) + ts_data->embedded_fw = ts_data_dmi->embedded_fw; + } else if (ts_data_dmi) { + ts_data = ts_data_dmi; + } else { return 0; /* Not an error */ + } - ts_data = dmi_id->driver_data; /* Some dmi table entries only provide an efi_embedded_fw_desc */ if (!ts_data->properties) return 0; diff --git a/drivers/platform/x86/uv_sysfs.c b/drivers/platform/x86/uv_sysfs.c index 38d1b692d3..f6a0627f36 100644 --- a/drivers/platform/x86/uv_sysfs.c +++ b/drivers/platform/x86/uv_sysfs.c @@ -11,6 +11,7 @@ #include <linux/device.h> #include <linux/slab.h> #include <linux/kobject.h> +#include <linux/vmalloc.h> #include <asm/uv/bios.h> #include <asm/uv/uv.h> #include <asm/uv/uv_hub.h> @@ -129,22 +130,22 @@ static ssize_t hub_location_show(struct uv_bios_hub_info *hub_info, char *buf) static ssize_t hub_partition_show(struct uv_bios_hub_info *hub_info, char *buf) { - return sprintf(buf, "%d\n", hub_info->f.fields.this_part); + return sysfs_emit(buf, "%d\n", hub_info->f.fields.this_part); } static ssize_t hub_shared_show(struct uv_bios_hub_info *hub_info, char *buf) { - return sprintf(buf, "%d\n", hub_info->f.fields.is_shared); + return sysfs_emit(buf, "%d\n", hub_info->f.fields.is_shared); } static ssize_t hub_nasid_show(struct uv_bios_hub_info *hub_info, char *buf) { int cnode = get_obj_to_cnode(hub_info->id); - return sprintf(buf, "%d\n", ordinal_to_nasid(cnode)); + return sysfs_emit(buf, "%d\n", ordinal_to_nasid(cnode)); } static ssize_t hub_cnode_show(struct uv_bios_hub_info *hub_info, char *buf) { - return sprintf(buf, "%d\n", get_obj_to_cnode(hub_info->id)); + return sysfs_emit(buf, "%d\n", get_obj_to_cnode(hub_info->id)); } struct hub_sysfs_entry { @@ -304,12 +305,12 @@ struct uv_port { static ssize_t uv_port_conn_hub_show(struct uv_bios_port_info *port, char *buf) { - return sprintf(buf, "%d\n", port->conn_id); + return sysfs_emit(buf, "%d\n", port->conn_id); } static ssize_t uv_port_conn_port_show(struct uv_bios_port_info *port, char *buf) { - return sprintf(buf, "%d\n", port->conn_port); + return sysfs_emit(buf, "%d\n", port->conn_port); } struct uv_port_sysfs_entry { @@ -470,7 +471,7 @@ static ssize_t uv_pci_location_show(struct uv_pci_top_obj *top_obj, char *buf) static ssize_t uv_pci_iio_stack_show(struct uv_pci_top_obj *top_obj, char *buf) { - return sprintf(buf, "%d\n", top_obj->iio_stack); + return sysfs_emit(buf, "%d\n", top_obj->iio_stack); } static ssize_t uv_pci_ppb_addr_show(struct uv_pci_top_obj *top_obj, char *buf) @@ -480,7 +481,7 @@ static ssize_t uv_pci_ppb_addr_show(struct uv_pci_top_obj *top_obj, char *buf) static ssize_t uv_pci_slot_show(struct uv_pci_top_obj *top_obj, char *buf) { - return sprintf(buf, "%d\n", top_obj->slot); + return sysfs_emit(buf, "%d\n", top_obj->slot); } struct uv_pci_top_sysfs_entry { @@ -725,13 +726,13 @@ static void pci_topology_exit(void) static ssize_t partition_id_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf) { - return sprintf(buf, "%ld\n", sn_partition_id); + return sysfs_emit(buf, "%ld\n", sn_partition_id); } static ssize_t coherence_id_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf) { - return sprintf(buf, "%ld\n", sn_coherency_id); + return sysfs_emit(buf, "%ld\n", sn_coherency_id); } static ssize_t uv_type_show(struct kobject *kobj, @@ -928,4 +929,5 @@ module_init(uv_sysfs_init); module_exit(uv_sysfs_exit); MODULE_AUTHOR("Hewlett Packard Enterprise"); +MODULE_DESCRIPTION("Sysfs structure for HPE UV systems"); MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/wireless-hotkey.c b/drivers/platform/x86/wireless-hotkey.c index 01feb6e678..a220fe4f9e 100644 --- a/drivers/platform/x86/wireless-hotkey.c +++ b/drivers/platform/x86/wireless-hotkey.c @@ -14,6 +14,7 @@ #include <linux/acpi.h> #include <acpi/acpi_bus.h> +MODULE_DESCRIPTION("Airplane mode button for AMD, HP & Xiaomi laptops"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Alex Hung"); MODULE_ALIAS("acpi*:HPQ6001:*"); @@ -112,7 +113,6 @@ static void wl_remove(struct acpi_device *device) static struct acpi_driver wl_driver = { .name = "wireless-hotkey", - .owner = THIS_MODULE, .ids = wl_ids, .ops = { .add = wl_add, diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c index 1920e115da..d21f3fa258 100644 --- a/drivers/platform/x86/wmi.c +++ b/drivers/platform/x86/wmi.c @@ -1153,47 +1153,6 @@ static int parse_wdg(struct device *wmi_bus_dev, struct platform_device *pdev) return 0; } -/* - * WMI can have EmbeddedControl access regions. In which case, we just want to - * hand these off to the EC driver. - */ -static acpi_status -acpi_wmi_ec_space_handler(u32 function, acpi_physical_address address, - u32 bits, u64 *value, - void *handler_context, void *region_context) -{ - int result = 0; - u8 temp = 0; - - if ((address > 0xFF) || !value) - return AE_BAD_PARAMETER; - - if (function != ACPI_READ && function != ACPI_WRITE) - return AE_BAD_PARAMETER; - - if (bits != 8) - return AE_BAD_PARAMETER; - - if (function == ACPI_READ) { - result = ec_read(address, &temp); - *value = temp; - } else { - temp = 0xff & *value; - result = ec_write(address, temp); - } - - switch (result) { - case -EINVAL: - return AE_BAD_PARAMETER; - case -ENODEV: - return AE_NOT_FOUND; - case -ETIME: - return AE_TIME; - default: - return AE_OK; - } -} - static int wmi_get_notify_data(struct wmi_block *wblock, union acpi_object **obj) { struct acpi_buffer data = { ACPI_ALLOCATE_BUFFER, NULL }; @@ -1308,14 +1267,6 @@ static void acpi_wmi_remove_notify_handler(void *data) acpi_remove_notify_handler(acpi_device->handle, ACPI_ALL_NOTIFY, acpi_wmi_notify_handler); } -static void acpi_wmi_remove_address_space_handler(void *data) -{ - struct acpi_device *acpi_device = data; - - acpi_remove_address_space_handler(acpi_device->handle, ACPI_ADR_SPACE_EC, - &acpi_wmi_ec_space_handler); -} - static void acpi_wmi_remove_bus_device(void *data) { struct device *wmi_bus_dev = data; @@ -1347,19 +1298,6 @@ static int acpi_wmi_probe(struct platform_device *device) dev_set_drvdata(&device->dev, wmi_bus_dev); - status = acpi_install_address_space_handler(acpi_device->handle, - ACPI_ADR_SPACE_EC, - &acpi_wmi_ec_space_handler, - NULL, NULL); - if (ACPI_FAILURE(status)) { - dev_err(&device->dev, "Error installing EC region handler\n"); - return -ENODEV; - } - error = devm_add_action_or_reset(&device->dev, acpi_wmi_remove_address_space_handler, - acpi_device); - if (error < 0) - return error; - status = acpi_install_notify_handler(acpi_device->handle, ACPI_ALL_NOTIFY, acpi_wmi_notify_handler, wmi_bus_dev); if (ACPI_FAILURE(status)) { diff --git a/drivers/platform/x86/x86-android-tablets/Kconfig b/drivers/platform/x86/x86-android-tablets/Kconfig index 6603461d42..b591419de8 100644 --- a/drivers/platform/x86/x86-android-tablets/Kconfig +++ b/drivers/platform/x86/x86-android-tablets/Kconfig @@ -6,6 +6,8 @@ config X86_ANDROID_TABLETS tristate "X86 Android tablet support" depends on I2C && SPI && SERIAL_DEV_BUS && ACPI && EFI && GPIOLIB && PMIC_OPREGION + select NEW_LEDS + select LEDS_CLASS help X86 tablets which ship with Android as (part of) the factory image typically have various problems with their DSDTs. The factory kernels diff --git a/drivers/platform/x86/x86-android-tablets/core.c b/drivers/platform/x86/x86-android-tablets/core.c index 6559bb4ea7..919ef44712 100644 --- a/drivers/platform/x86/x86-android-tablets/core.c +++ b/drivers/platform/x86/x86-android-tablets/core.c @@ -52,10 +52,8 @@ int x86_android_tablet_get_gpiod(const char *chip, int pin, const char *con_id, return -ENOMEM; lookup->dev_id = KBUILD_MODNAME; - lookup->table[0].key = chip; - lookup->table[0].chip_hwnum = pin; - lookup->table[0].con_id = con_id; - lookup->table[0].flags = active_low ? GPIO_ACTIVE_LOW : GPIO_ACTIVE_HIGH; + lookup->table[0] = + GPIO_LOOKUP(chip, pin, con_id, active_low ? GPIO_ACTIVE_LOW : GPIO_ACTIVE_HIGH); gpiod_add_lookup_table(lookup); gpiod = devm_gpiod_get(&x86_android_tablet_device->dev, con_id, dflags); @@ -343,7 +341,7 @@ static __init int x86_android_tablet_probe(struct platform_device *pdev) gpiod_add_lookup_table(gpiod_lookup_tables[i]); if (dev_info->init) { - ret = dev_info->init(); + ret = dev_info->init(&pdev->dev); if (ret < 0) { x86_android_tablet_remove(pdev); return ret; diff --git a/drivers/platform/x86/x86-android-tablets/lenovo.c b/drivers/platform/x86/x86-android-tablets/lenovo.c index 16fa04d604..74f39b658d 100644 --- a/drivers/platform/x86/x86-android-tablets/lenovo.c +++ b/drivers/platform/x86/x86-android-tablets/lenovo.c @@ -230,7 +230,7 @@ static struct gpiod_lookup_table * const lenovo_yb1_x90_gpios[] = { NULL }; -static int __init lenovo_yb1_x90_init(void) +static int __init lenovo_yb1_x90_init(struct device *dev) { /* Enable the regulators used by the touchscreens */ @@ -412,7 +412,7 @@ static struct gpiod_lookup_table * const lenovo_yoga_tab2_830_1050_gpios[] = { NULL }; -static int __init lenovo_yoga_tab2_830_1050_init(void); +static int __init lenovo_yoga_tab2_830_1050_init(struct device *dev); static void lenovo_yoga_tab2_830_1050_exit(void); const struct x86_dev_info lenovo_yoga_tab2_830_1050_info __initconst = { @@ -534,7 +534,7 @@ static int lenovo_yoga_tab2_830_1050_power_off(struct sys_off_data *data) return NOTIFY_DONE; } -static int __init lenovo_yoga_tab2_830_1050_init(void) +static int __init lenovo_yoga_tab2_830_1050_init(struct device *dev) { int ret; @@ -731,7 +731,7 @@ const char * const lenovo_yoga_tab2_1380_modules[] __initconst = { NULL }; -static int __init lenovo_yoga_tab2_1380_init(void) +static int __init lenovo_yoga_tab2_1380_init(struct device *dev) { int ret; @@ -978,7 +978,7 @@ static const struct x86_spi_dev_info lenovo_yt3_spi_devs[] __initconst = { } }; -static int __init lenovo_yt3_init(void) +static int __init lenovo_yt3_init(struct device *dev) { int ret; diff --git a/drivers/platform/x86/x86-android-tablets/other.c b/drivers/platform/x86/x86-android-tablets/other.c index 278402dcb8..eb0e55c69d 100644 --- a/drivers/platform/x86/x86-android-tablets/other.c +++ b/drivers/platform/x86/x86-android-tablets/other.c @@ -11,7 +11,11 @@ #include <linux/acpi.h> #include <linux/gpio/machine.h> #include <linux/input.h> +#include <linux/leds.h> #include <linux/platform_device.h> +#include <linux/pwm.h> + +#include <dt-bindings/leds/common.h> #include "shared-psy-info.h" #include "x86-android-tablets.h" @@ -181,7 +185,7 @@ static const struct x86_i2c_client_info chuwi_hi8_i2c_clients[] __initconst = { }, }; -static int __init chuwi_hi8_init(void) +static int __init chuwi_hi8_init(struct device *dev) { /* * Avoid the acpi_unregister_gsi() call in x86_acpi_irq_helper_get() @@ -242,7 +246,7 @@ const struct x86_dev_info cyberbook_t116_info __initconst = { #define CZC_EC_EXTRA_PORT 0x68 #define CZC_EC_ANDROID_KEYS 0x63 -static int __init czc_p10t_init(void) +static int __init czc_p10t_init(struct device *dev) { /* * The device boots up in "Windows 7" mode, when the home button sends a @@ -594,6 +598,128 @@ const struct x86_dev_info whitelabel_tm800a550l_info __initconst = { }; /* + * The fwnode for ktd2026 on Xaomi pad2. It composed of a RGB LED node + * with three subnodes for each color (B/G/R). The RGB LED node is named + * "multi-led" to align with the name in the device tree. + */ + +/* main fwnode for ktd2026 */ +static const struct software_node ktd2026_node = { + .name = "ktd2026", +}; + +static const struct property_entry ktd2026_rgb_led_props[] = { + PROPERTY_ENTRY_U32("reg", 0), + PROPERTY_ENTRY_U32("color", LED_COLOR_ID_RGB), + PROPERTY_ENTRY_STRING("label", "mipad2:rgb:indicator"), + PROPERTY_ENTRY_STRING("linux,default-trigger", "bq27520-0-charging-orange-full-green"), + { } +}; + +static const struct software_node ktd2026_rgb_led_node = { + .name = "multi-led", + .properties = ktd2026_rgb_led_props, + .parent = &ktd2026_node, +}; + +static const struct property_entry ktd2026_blue_led_props[] = { + PROPERTY_ENTRY_U32("reg", 0), + PROPERTY_ENTRY_U32("color", LED_COLOR_ID_BLUE), + { } +}; + +static const struct software_node ktd2026_blue_led_node = { + .properties = ktd2026_blue_led_props, + .parent = &ktd2026_rgb_led_node, +}; + +static const struct property_entry ktd2026_green_led_props[] = { + PROPERTY_ENTRY_U32("reg", 1), + PROPERTY_ENTRY_U32("color", LED_COLOR_ID_GREEN), + { } +}; + +static const struct software_node ktd2026_green_led_node = { + .properties = ktd2026_green_led_props, + .parent = &ktd2026_rgb_led_node, +}; + +static const struct property_entry ktd2026_red_led_props[] = { + PROPERTY_ENTRY_U32("reg", 2), + PROPERTY_ENTRY_U32("color", LED_COLOR_ID_RED), + { } +}; + +static const struct software_node ktd2026_red_led_node = { + .properties = ktd2026_red_led_props, + .parent = &ktd2026_rgb_led_node, +}; + +static const struct software_node *ktd2026_node_group[] = { + &ktd2026_node, + &ktd2026_rgb_led_node, + &ktd2026_red_led_node, + &ktd2026_green_led_node, + &ktd2026_blue_led_node, + NULL +}; + +/* + * For the LEDs which backlight the menu / home / back capacitive buttons on + * the bottom bezel. These are attached to a TPS61158 LED controller which + * is controlled by the "pwm_soc_lpss_2" PWM output. + */ +#define XIAOMI_MIPAD2_LED_PERIOD_NS 19200 +#define XIAOMI_MIPAD2_LED_DEFAULT_DUTY 6000 /* From Android kernel */ + +static struct pwm_device *xiaomi_mipad2_led_pwm; + +static int xiaomi_mipad2_brightness_set(struct led_classdev *led_cdev, + enum led_brightness val) +{ + struct pwm_state state = { + .period = XIAOMI_MIPAD2_LED_PERIOD_NS, + .duty_cycle = val, + /* Always set PWM enabled to avoid the pin floating */ + .enabled = true, + }; + + return pwm_apply_might_sleep(xiaomi_mipad2_led_pwm, &state); +} + +static int __init xiaomi_mipad2_init(struct device *dev) +{ + struct led_classdev *led_cdev; + int ret; + + xiaomi_mipad2_led_pwm = devm_pwm_get(dev, "pwm_soc_lpss_2"); + if (IS_ERR(xiaomi_mipad2_led_pwm)) + return dev_err_probe(dev, PTR_ERR(xiaomi_mipad2_led_pwm), "getting pwm\n"); + + led_cdev = devm_kzalloc(dev, sizeof(*led_cdev), GFP_KERNEL); + if (!led_cdev) + return -ENOMEM; + + led_cdev->name = "mipad2:white:touch-buttons-backlight"; + led_cdev->max_brightness = XIAOMI_MIPAD2_LED_PERIOD_NS; + /* "input-events" trigger uses blink_brightness */ + led_cdev->blink_brightness = XIAOMI_MIPAD2_LED_DEFAULT_DUTY; + led_cdev->default_trigger = "input-events"; + led_cdev->brightness_set_blocking = xiaomi_mipad2_brightness_set; + + ret = devm_led_classdev_register(dev, led_cdev); + if (ret) + return dev_err_probe(dev, ret, "registering LED\n"); + + return software_node_register_node_group(ktd2026_node_group); +} + +static void xiaomi_mipad2_exit(void) +{ + software_node_unregister_node_group(ktd2026_node_group); +} + +/* * If the EFI bootloader is not Xiaomi's own signed Android loader, then the * Xiaomi Mi Pad 2 X86 tablet sets OSID in the DSDT to 1 (Windows), causing * a bunch of devices to be hidden. @@ -616,6 +742,7 @@ static const struct x86_i2c_client_info xiaomi_mipad2_i2c_clients[] __initconst .type = "ktd2026", .addr = 0x30, .dev_name = "ktd2026", + .swnode = &ktd2026_node, }, .adapter_path = "\\_SB_.PCI0.I2C3", }, @@ -624,4 +751,6 @@ static const struct x86_i2c_client_info xiaomi_mipad2_i2c_clients[] __initconst const struct x86_dev_info xiaomi_mipad2_info __initconst = { .i2c_client_info = xiaomi_mipad2_i2c_clients, .i2c_client_count = ARRAY_SIZE(xiaomi_mipad2_i2c_clients), + .init = xiaomi_mipad2_init, + .exit = xiaomi_mipad2_exit, }; diff --git a/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h b/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h index 821dc094b0..86402b9b46 100644 --- a/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h +++ b/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h @@ -89,7 +89,7 @@ struct x86_dev_info { int pdev_count; int serdev_count; int gpio_button_count; - int (*init)(void); + int (*init)(struct device *dev); void (*exit)(void); }; diff --git a/drivers/platform/x86/xiaomi-wmi.c b/drivers/platform/x86/xiaomi-wmi.c index be80f0bda9..cbed29ca50 100644 --- a/drivers/platform/x86/xiaomi-wmi.c +++ b/drivers/platform/x86/xiaomi-wmi.c @@ -38,7 +38,7 @@ static int xiaomi_wmi_probe(struct wmi_device *wdev, const void *context) struct xiaomi_wmi *data; int ret; - if (wdev == NULL || context == NULL) + if (!context) return -EINVAL; data = devm_kzalloc(&wdev->dev, sizeof(struct xiaomi_wmi), GFP_KERNEL); @@ -66,14 +66,7 @@ static int xiaomi_wmi_probe(struct wmi_device *wdev, const void *context) static void xiaomi_wmi_notify(struct wmi_device *wdev, union acpi_object *dummy) { - struct xiaomi_wmi *data; - - if (wdev == NULL) - return; - - data = dev_get_drvdata(&wdev->dev); - if (data == NULL) - return; + struct xiaomi_wmi *data = dev_get_drvdata(&wdev->dev); mutex_lock(&data->key_lock); input_report_key(data->input_dev, data->key_code, 1); @@ -101,6 +94,7 @@ static struct wmi_driver xiaomi_wmi_driver = { .id_table = xiaomi_wmi_id_table, .probe = xiaomi_wmi_probe, .notify = xiaomi_wmi_notify, + .no_singleton = true, }; module_wmi_driver(xiaomi_wmi_driver); diff --git a/drivers/platform/x86/xo1-rfkill.c b/drivers/platform/x86/xo1-rfkill.c index e64d5646b4..5fe6829650 100644 --- a/drivers/platform/x86/xo1-rfkill.c +++ b/drivers/platform/x86/xo1-rfkill.c @@ -74,5 +74,6 @@ static struct platform_driver xo1_rfkill_driver = { module_platform_driver(xo1_rfkill_driver); MODULE_AUTHOR("Daniel Drake <dsd@laptop.org>"); +MODULE_DESCRIPTION("OLPC XO-1 software RF kill switch"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:xo1-rfkill"); |