6 files changed, 756 insertions, 0 deletions

diff --git a/drivers/pps/clients/Kconfig b/drivers/pps/clients/Kconfig
new file mode 100644
index 0000000000..4f3244e17a
--- /dev/null
+++ b/drivers/pps/clients/Kconfig
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# PPS clients configuration
+#
+
+comment "PPS clients support"
+
+config PPS_CLIENT_KTIMER
+	tristate "Kernel timer client (Testing client, use for debug)"
+	help
+	  If you say yes here you get support for a PPS debugging client
+	  which uses a kernel timer to generate the PPS signal.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called pps-ktimer.
+
+config PPS_CLIENT_LDISC
+	tristate "PPS line discipline"
+	depends on TTY
+	help
+	  If you say yes here you get support for a PPS source connected
+	  with the CD (Carrier Detect) pin of your serial port.
+
+config PPS_CLIENT_PARPORT
+	tristate "Parallel port PPS client"
+	depends on PARPORT
+	help
+	  If you say yes here you get support for a PPS source connected
+	  with the interrupt pin of your parallel port.
+
+config PPS_CLIENT_GPIO
+	tristate "PPS client using GPIO"
+	help
+	  If you say yes here you get support for a PPS source using
+	  GPIO. To be useful you must also register a platform device
+	  specifying the GPIO pin and other options, usually in your board
+	  setup.
diff --git a/drivers/pps/clients/Makefile b/drivers/pps/clients/Makefile
new file mode 100644
index 0000000000..7a3807e578
--- /dev/null
+++ b/drivers/pps/clients/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for PPS clients.
+#
+
+obj-$(CONFIG_PPS_CLIENT_KTIMER)	+= pps-ktimer.o
+obj-$(CONFIG_PPS_CLIENT_LDISC)	+= pps-ldisc.o
+obj-$(CONFIG_PPS_CLIENT_PARPORT) += pps_parport.o
+obj-$(CONFIG_PPS_CLIENT_GPIO)	+= pps-gpio.o
+
+ccflags-$(CONFIG_PPS_DEBUG) := -DDEBUG
diff --git a/drivers/pps/clients/pps-gpio.c b/drivers/pps/clients/pps-gpio.c
new file mode 100644
index 0000000000..2f4b11b4df
--- /dev/null
+++ b/drivers/pps/clients/pps-gpio.c
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * pps-gpio.c -- PPS client driver using GPIO
+ *
+ * Copyright (C) 2010 Ricardo Martins <rasm@fe.up.pt>
+ * Copyright (C) 2011 James Nuss <jamesnuss@nanometrics.ca>
+ */
+
+#define PPS_GPIO_NAME "pps-gpio"
+#define pr_fmt(fmt) PPS_GPIO_NAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/pps_kernel.h>
+#include <linux/gpio/consumer.h>
+#include <linux/list.h>
+#include <linux/property.h>
+#include <linux/timer.h>
+#include <linux/jiffies.h>
+
+/* Info for each registered platform device */
+struct pps_gpio_device_data {
+	int irq;			/* IRQ used as PPS source */
+	struct pps_device *pps;		/* PPS source device */
+	struct pps_source_info info;	/* PPS source information */
+	struct gpio_desc *gpio_pin;	/* GPIO port descriptors */
+	struct gpio_desc *echo_pin;
+	struct timer_list echo_timer;	/* timer to reset echo active state */
+	bool assert_falling_edge;
+	bool capture_clear;
+	unsigned int echo_active_ms;	/* PPS echo active duration */
+	unsigned long echo_timeout;	/* timer timeout value in jiffies */
+};
+
+/*
+ * Report the PPS event
+ */
+
+static irqreturn_t pps_gpio_irq_handler(int irq, void *data)
+{
+	const struct pps_gpio_device_data *info;
+	struct pps_event_time ts;
+	int rising_edge;
+
+	/* Get the time stamp first */
+	pps_get_ts(&ts);
+
+	info = data;
+
+	rising_edge = gpiod_get_value(info->gpio_pin);
+	if ((rising_edge && !info->assert_falling_edge) ||
+			(!rising_edge && info->assert_falling_edge))
+		pps_event(info->pps, &ts, PPS_CAPTUREASSERT, data);
+	else if (info->capture_clear &&
+			((rising_edge && info->assert_falling_edge) ||
+			(!rising_edge && !info->assert_falling_edge)))
+		pps_event(info->pps, &ts, PPS_CAPTURECLEAR, data);
+
+	return IRQ_HANDLED;
+}
+
+/* This function will only be called when an ECHO GPIO is defined */
+static void pps_gpio_echo(struct pps_device *pps, int event, void *data)
+{
+	/* add_timer() needs to write into info->echo_timer */
+	struct pps_gpio_device_data *info = data;
+
+	switch (event) {
+	case PPS_CAPTUREASSERT:
+		if (pps->params.mode & PPS_ECHOASSERT)
+			gpiod_set_value(info->echo_pin, 1);
+		break;
+
+	case PPS_CAPTURECLEAR:
+		if (pps->params.mode & PPS_ECHOCLEAR)
+			gpiod_set_value(info->echo_pin, 1);
+		break;
+	}
+
+	/* fire the timer */
+	if (info->pps->params.mode & (PPS_ECHOASSERT | PPS_ECHOCLEAR)) {
+		info->echo_timer.expires = jiffies + info->echo_timeout;
+		add_timer(&info->echo_timer);
+	}
+}
+
+/* Timer callback to reset the echo pin to the inactive state */
+static void pps_gpio_echo_timer_callback(struct timer_list *t)
+{
+	const struct pps_gpio_device_data *info;
+
+	info = from_timer(info, t, echo_timer);
+
+	gpiod_set_value(info->echo_pin, 0);
+}
+
+static int pps_gpio_setup(struct device *dev)
+{
+	struct pps_gpio_device_data *data = dev_get_drvdata(dev);
+	int ret;
+	u32 value;
+
+	data->gpio_pin = devm_gpiod_get(dev, NULL, GPIOD_IN);
+	if (IS_ERR(data->gpio_pin))
+		return dev_err_probe(dev, PTR_ERR(data->gpio_pin),
+				     "failed to request PPS GPIO\n");
+
+	data->assert_falling_edge =
+		device_property_read_bool(dev, "assert-falling-edge");
+
+	data->echo_pin = devm_gpiod_get_optional(dev, "echo", GPIOD_OUT_LOW);
+	if (IS_ERR(data->echo_pin))
+		return dev_err_probe(dev, PTR_ERR(data->echo_pin),
+				     "failed to request ECHO GPIO\n");
+
+	if (!data->echo_pin)
+		return 0;
+
+	ret = device_property_read_u32(dev, "echo-active-ms", &value);
+	if (ret) {
+		dev_err(dev, "failed to get echo-active-ms from FW\n");
+		return ret;
+	}
+
+	/* sanity check on echo_active_ms */
+	if (!value || value > 999) {
+		dev_err(dev, "echo-active-ms: %u - bad value from FW\n", value);
+		return -EINVAL;
+	}
+
+	data->echo_active_ms = value;
+
+	return 0;
+}
+
+static unsigned long
+get_irqf_trigger_flags(const struct pps_gpio_device_data *data)
+{
+	unsigned long flags = data->assert_falling_edge ?
+		IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING;
+
+	if (data->capture_clear) {
+		flags |= ((flags & IRQF_TRIGGER_RISING) ?
+				IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING);
+	}
+
+	return flags;
+}
+
+static int pps_gpio_probe(struct platform_device *pdev)
+{
+	struct pps_gpio_device_data *data;
+	struct device *dev = &pdev->dev;
+	int ret;
+	int pps_default_params;
+
+	/* allocate space for device info */
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, data);
+
+	/* GPIO setup */
+	ret = pps_gpio_setup(dev);
+	if (ret)
+		return ret;
+
+	/* IRQ setup */
+	ret = gpiod_to_irq(data->gpio_pin);
+	if (ret < 0) {
+		dev_err(dev, "failed to map GPIO to IRQ: %d\n", ret);
+		return -EINVAL;
+	}
+	data->irq = ret;
+
+	/* initialize PPS specific parts of the bookkeeping data structure. */
+	data->info.mode = PPS_CAPTUREASSERT | PPS_OFFSETASSERT |
+		PPS_ECHOASSERT | PPS_CANWAIT | PPS_TSFMT_TSPEC;
+	if (data->capture_clear)
+		data->info.mode |= PPS_CAPTURECLEAR | PPS_OFFSETCLEAR |
+			PPS_ECHOCLEAR;
+	data->info.owner = THIS_MODULE;
+	snprintf(data->info.name, PPS_MAX_NAME_LEN - 1, "%s.%d",
+		 pdev->name, pdev->id);
+	if (data->echo_pin) {
+		data->info.echo = pps_gpio_echo;
+		data->echo_timeout = msecs_to_jiffies(data->echo_active_ms);
+		timer_setup(&data->echo_timer, pps_gpio_echo_timer_callback, 0);
+	}
+
+	/* register PPS source */
+	pps_default_params = PPS_CAPTUREASSERT | PPS_OFFSETASSERT;
+	if (data->capture_clear)
+		pps_default_params |= PPS_CAPTURECLEAR | PPS_OFFSETCLEAR;
+	data->pps = pps_register_source(&data->info, pps_default_params);
+	if (IS_ERR(data->pps)) {
+		dev_err(dev, "failed to register IRQ %d as PPS source\n",
+			data->irq);
+		return PTR_ERR(data->pps);
+	}
+
+	/* register IRQ interrupt handler */
+	ret = devm_request_irq(dev, data->irq, pps_gpio_irq_handler,
+			get_irqf_trigger_flags(data), data->info.name, data);
+	if (ret) {
+		pps_unregister_source(data->pps);
+		dev_err(dev, "failed to acquire IRQ %d\n", data->irq);
+		return -EINVAL;
+	}
+
+	dev_info(data->pps->dev, "Registered IRQ %d as PPS source\n",
+		 data->irq);
+
+	return 0;
+}
+
+static int pps_gpio_remove(struct platform_device *pdev)
+{
+	struct pps_gpio_device_data *data = platform_get_drvdata(pdev);
+
+	pps_unregister_source(data->pps);
+	del_timer_sync(&data->echo_timer);
+	/* reset echo pin in any case */
+	gpiod_set_value(data->echo_pin, 0);
+	dev_info(&pdev->dev, "removed IRQ %d as PPS source\n", data->irq);
+	return 0;
+}
+
+static const struct of_device_id pps_gpio_dt_ids[] = {
+	{ .compatible = "pps-gpio", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, pps_gpio_dt_ids);
+
+static struct platform_driver pps_gpio_driver = {
+	.probe		= pps_gpio_probe,
+	.remove		= pps_gpio_remove,
+	.driver		= {
+		.name	= PPS_GPIO_NAME,
+		.of_match_table	= pps_gpio_dt_ids,
+	},
+};
+
+module_platform_driver(pps_gpio_driver);
+MODULE_AUTHOR("Ricardo Martins <rasm@fe.up.pt>");
+MODULE_AUTHOR("James Nuss <jamesnuss@nanometrics.ca>");
+MODULE_DESCRIPTION("Use GPIO pin as PPS source");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1.2.0");
diff --git a/drivers/pps/clients/pps-ktimer.c b/drivers/pps/clients/pps-ktimer.c
new file mode 100644
index 0000000000..d33106bd7a
--- /dev/null
+++ b/drivers/pps/clients/pps-ktimer.c
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * pps-ktimer.c -- kernel timer test client
+ *
+ * Copyright (C) 2005-2006   Rodolfo Giometti <giometti@linux.it>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#include <linux/pps_kernel.h>
+
+/*
+ * Global variables
+ */
+
+static struct pps_device *pps;
+static struct timer_list ktimer;
+
+/*
+ * The kernel timer
+ */
+
+static void pps_ktimer_event(struct timer_list *unused)
+{
+	struct pps_event_time ts;
+
+	/* First of all we get the time stamp... */
+	pps_get_ts(&ts);
+
+	pps_event(pps, &ts, PPS_CAPTUREASSERT, NULL);
+
+	mod_timer(&ktimer, jiffies + HZ);
+}
+
+/*
+ * The PPS info struct
+ */
+
+static struct pps_source_info pps_ktimer_info = {
+	.name		= "ktimer",
+	.path		= "",
+	.mode		= PPS_CAPTUREASSERT | PPS_OFFSETASSERT |
+			  PPS_ECHOASSERT |
+			  PPS_CANWAIT | PPS_TSFMT_TSPEC,
+	.owner		= THIS_MODULE,
+};
+
+/*
+ * Module staff
+ */
+
+static void __exit pps_ktimer_exit(void)
+{
+	dev_info(pps->dev, "ktimer PPS source unregistered\n");
+
+	del_timer_sync(&ktimer);
+	pps_unregister_source(pps);
+}
+
+static int __init pps_ktimer_init(void)
+{
+	pps = pps_register_source(&pps_ktimer_info,
+				PPS_CAPTUREASSERT | PPS_OFFSETASSERT);
+	if (IS_ERR(pps)) {
+		pr_err("cannot register PPS source\n");
+		return PTR_ERR(pps);
+	}
+
+	timer_setup(&ktimer, pps_ktimer_event, 0);
+	mod_timer(&ktimer, jiffies + HZ);
+
+	dev_info(pps->dev, "ktimer PPS source registered\n");
+
+	return 0;
+}
+
+module_init(pps_ktimer_init);
+module_exit(pps_ktimer_exit);
+
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("dummy PPS source by using a kernel timer (just for debug)");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pps/clients/pps-ldisc.c b/drivers/pps/clients/pps-ldisc.c
new file mode 100644
index 0000000000..443d6bae19
--- /dev/null
+++ b/drivers/pps/clients/pps-ldisc.c
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * pps-ldisc.c -- PPS line discipline
+ *
+ * Copyright (C) 2008	Rodolfo Giometti <giometti@linux.it>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/serial_core.h>
+#include <linux/tty.h>
+#include <linux/pps_kernel.h>
+#include <linux/bug.h>
+
+static void pps_tty_dcd_change(struct tty_struct *tty, bool active)
+{
+	struct pps_device *pps;
+	struct pps_event_time ts;
+
+	pps_get_ts(&ts);
+
+	pps = pps_lookup_dev(tty);
+	/*
+	 * This should never fail, but the ldisc locking is very
+	 * convoluted, so don't crash just in case.
+	 */
+	if (WARN_ON_ONCE(pps == NULL))
+		return;
+
+	/* Now do the PPS event report */
+	pps_event(pps, &ts, active ? PPS_CAPTUREASSERT :
+			PPS_CAPTURECLEAR, NULL);
+
+	dev_dbg(pps->dev, "PPS %s at %lu\n",
+			active ? "assert" : "clear", jiffies);
+}
+
+static int (*alias_n_tty_open)(struct tty_struct *tty);
+
+static int pps_tty_open(struct tty_struct *tty)
+{
+	struct pps_source_info info;
+	struct tty_driver *drv = tty->driver;
+	int index = tty->index + drv->name_base;
+	struct pps_device *pps;
+	int ret;
+
+	info.owner = THIS_MODULE;
+	info.dev = NULL;
+	snprintf(info.name, PPS_MAX_NAME_LEN, "%s%d", drv->driver_name, index);
+	snprintf(info.path, PPS_MAX_NAME_LEN, "/dev/%s%d", drv->name, index);
+	info.mode = PPS_CAPTUREBOTH | \
+			PPS_OFFSETASSERT | PPS_OFFSETCLEAR | \
+			PPS_CANWAIT | PPS_TSFMT_TSPEC;
+
+	pps = pps_register_source(&info, PPS_CAPTUREBOTH | \
+				PPS_OFFSETASSERT | PPS_OFFSETCLEAR);
+	if (IS_ERR(pps)) {
+		pr_err("cannot register PPS source \"%s\"\n", info.path);
+		return PTR_ERR(pps);
+	}
+	pps->lookup_cookie = tty;
+
+	/* Now open the base class N_TTY ldisc */
+	ret = alias_n_tty_open(tty);
+	if (ret < 0) {
+		pr_err("cannot open tty ldisc \"%s\"\n", info.path);
+		goto err_unregister;
+	}
+
+	dev_info(pps->dev, "source \"%s\" added\n", info.path);
+
+	return 0;
+
+err_unregister:
+	pps_unregister_source(pps);
+	return ret;
+}
+
+static void (*alias_n_tty_close)(struct tty_struct *tty);
+
+static void pps_tty_close(struct tty_struct *tty)
+{
+	struct pps_device *pps = pps_lookup_dev(tty);
+
+	alias_n_tty_close(tty);
+
+	if (WARN_ON(!pps))
+		return;
+
+	dev_info(pps->dev, "removed\n");
+	pps_unregister_source(pps);
+}
+
+static struct tty_ldisc_ops pps_ldisc_ops;
+
+/*
+ * Module stuff
+ */
+
+static int __init pps_tty_init(void)
+{
+	int err;
+
+	/* Inherit the N_TTY's ops */
+	n_tty_inherit_ops(&pps_ldisc_ops);
+
+	/* Save N_TTY's open()/close() methods */
+	alias_n_tty_open = pps_ldisc_ops.open;
+	alias_n_tty_close = pps_ldisc_ops.close;
+
+	/* Init PPS_TTY data */
+	pps_ldisc_ops.owner = THIS_MODULE;
+	pps_ldisc_ops.num = N_PPS;
+	pps_ldisc_ops.name = "pps_tty";
+	pps_ldisc_ops.dcd_change = pps_tty_dcd_change;
+	pps_ldisc_ops.open = pps_tty_open;
+	pps_ldisc_ops.close = pps_tty_close;
+
+	err = tty_register_ldisc(&pps_ldisc_ops);
+	if (err)
+		pr_err("can't register PPS line discipline\n");
+	else
+		pr_info("PPS line discipline registered\n");
+
+	return err;
+}
+
+static void __exit pps_tty_cleanup(void)
+{
+	tty_unregister_ldisc(&pps_ldisc_ops);
+}
+
+module_init(pps_tty_init);
+module_exit(pps_tty_cleanup);
+
+MODULE_ALIAS_LDISC(N_PPS);
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("PPS TTY device driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pps/clients/pps_parport.c b/drivers/pps/clients/pps_parport.c
new file mode 100644
index 0000000000..42f93d4c6e
--- /dev/null
+++ b/drivers/pps/clients/pps_parport.c
@@ -0,0 +1,225 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * pps_parport.c -- kernel parallel port PPS client
+ *
+ * Copyright (C) 2009   Alexander Gordeev <lasaine@lvk.cs.msu.su>
+ */
+
+
+/*
+ * TODO:
+ * implement echo over SEL pin
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/irqnr.h>
+#include <linux/time.h>
+#include <linux/slab.h>
+#include <linux/parport.h>
+#include <linux/pps_kernel.h>
+
+/* module parameters */
+
+#define CLEAR_WAIT_MAX		100
+#define CLEAR_WAIT_MAX_ERRORS	5
+
+static unsigned int clear_wait = 100;
+MODULE_PARM_DESC(clear_wait,
+	"Maximum number of port reads when polling for signal clear,"
+	" zero turns clear edge capture off entirely");
+module_param(clear_wait, uint, 0);
+
+static DEFINE_IDA(pps_client_index);
+
+/* internal per port structure */
+struct pps_client_pp {
+	struct pardevice *pardev;	/* parport device */
+	struct pps_device *pps;		/* PPS device */
+	unsigned int cw;		/* port clear timeout */
+	unsigned int cw_err;		/* number of timeouts */
+	int index;			/* device number */
+};
+
+static inline int signal_is_set(struct parport *port)
+{
+	return (port->ops->read_status(port) & PARPORT_STATUS_ACK) != 0;
+}
+
+/* parport interrupt handler */
+static void parport_irq(void *handle)
+{
+	struct pps_event_time ts_assert, ts_clear;
+	struct pps_client_pp *dev = handle;
+	struct parport *port = dev->pardev->port;
+	unsigned int i;
+	unsigned long flags;
+
+	/* first of all we get the time stamp... */
+	pps_get_ts(&ts_assert);
+
+	if (dev->cw == 0)
+		/* clear edge capture disabled */
+		goto out_assert;
+
+	/* try capture the clear edge */
+
+	/* We have to disable interrupts here. The idea is to prevent
+	 * other interrupts on the same processor to introduce random
+	 * lags while polling the port. Reading from IO port is known
+	 * to take approximately 1us while other interrupt handlers can
+	 * take much more potentially.
+	 *
+	 * Interrupts won't be disabled for a long time because the
+	 * number of polls is limited by clear_wait parameter which is
+	 * kept rather low. So it should never be an issue.
+	 */
+	local_irq_save(flags);
+	/* check the signal (no signal means the pulse is lost this time) */
+	if (!signal_is_set(port)) {
+		local_irq_restore(flags);
+		dev_err(dev->pps->dev, "lost the signal\n");
+		goto out_assert;
+	}
+
+	/* poll the port until the signal is unset */
+	for (i = dev->cw; i; i--)
+		if (!signal_is_set(port)) {
+			pps_get_ts(&ts_clear);
+			local_irq_restore(flags);
+			dev->cw_err = 0;
+			goto out_both;
+		}
+	local_irq_restore(flags);
+
+	/* timeout */
+	dev->cw_err++;
+	if (dev->cw_err >= CLEAR_WAIT_MAX_ERRORS) {
+		dev_err(dev->pps->dev, "disabled clear edge capture after %d"
+				" timeouts\n", dev->cw_err);
+		dev->cw = 0;
+		dev->cw_err = 0;
+	}
+
+out_assert:
+	/* fire assert event */
+	pps_event(dev->pps, &ts_assert,
+			PPS_CAPTUREASSERT, NULL);
+	return;
+
+out_both:
+	/* fire assert event */
+	pps_event(dev->pps, &ts_assert,
+			PPS_CAPTUREASSERT, NULL);
+	/* fire clear event */
+	pps_event(dev->pps, &ts_clear,
+			PPS_CAPTURECLEAR, NULL);
+	return;
+}
+
+static void parport_attach(struct parport *port)
+{
+	struct pardev_cb pps_client_cb;
+	int index;
+	struct pps_client_pp *device;
+	struct pps_source_info info = {
+		.name		= KBUILD_MODNAME,
+		.path		= "",
+		.mode		= PPS_CAPTUREBOTH | \
+				  PPS_OFFSETASSERT | PPS_OFFSETCLEAR | \
+				  PPS_ECHOASSERT | PPS_ECHOCLEAR | \
+				  PPS_CANWAIT | PPS_TSFMT_TSPEC,
+		.owner		= THIS_MODULE,
+		.dev		= NULL
+	};
+
+	if (clear_wait > CLEAR_WAIT_MAX) {
+		pr_err("clear_wait value should be not greater then %d\n",
+		       CLEAR_WAIT_MAX);
+		return;
+	}
+
+	device = kzalloc(sizeof(struct pps_client_pp), GFP_KERNEL);
+	if (!device) {
+		pr_err("memory allocation failed, not attaching\n");
+		return;
+	}
+
+	index = ida_simple_get(&pps_client_index, 0, 0, GFP_KERNEL);
+	memset(&pps_client_cb, 0, sizeof(pps_client_cb));
+	pps_client_cb.private = device;
+	pps_client_cb.irq_func = parport_irq;
+	pps_client_cb.flags = PARPORT_FLAG_EXCL;
+	device->pardev = parport_register_dev_model(port,
+						    KBUILD_MODNAME,
+						    &pps_client_cb,
+						    index);
+	if (!device->pardev) {
+		pr_err("couldn't register with %s\n", port->name);
+		goto err_free;
+	}
+
+	if (parport_claim_or_block(device->pardev) < 0) {
+		pr_err("couldn't claim %s\n", port->name);
+		goto err_unregister_dev;
+	}
+
+	device->pps = pps_register_source(&info,
+			PPS_CAPTUREBOTH | PPS_OFFSETASSERT | PPS_OFFSETCLEAR);
+	if (IS_ERR(device->pps)) {
+		pr_err("couldn't register PPS source\n");
+		goto err_release_dev;
+	}
+
+	device->cw = clear_wait;
+
+	port->ops->enable_irq(port);
+	device->index = index;
+
+	pr_info("attached to %s\n", port->name);
+
+	return;
+
+err_release_dev:
+	parport_release(device->pardev);
+err_unregister_dev:
+	parport_unregister_device(device->pardev);
+err_free:
+	ida_simple_remove(&pps_client_index, index);
+	kfree(device);
+}
+
+static void parport_detach(struct parport *port)
+{
+	struct pardevice *pardev = port->cad;
+	struct pps_client_pp *device;
+
+	/* FIXME: oooh, this is ugly! */
+	if (!pardev || strcmp(pardev->name, KBUILD_MODNAME))
+		/* not our port */
+		return;
+
+	device = pardev->private;
+
+	port->ops->disable_irq(port);
+	pps_unregister_source(device->pps);
+	parport_release(pardev);
+	parport_unregister_device(pardev);
+	ida_simple_remove(&pps_client_index, device->index);
+	kfree(device);
+}
+
+static struct parport_driver pps_parport_driver = {
+	.name = KBUILD_MODNAME,
+	.match_port = parport_attach,
+	.detach = parport_detach,
+	.devmodel = true,
+};
+module_parport_driver(pps_parport_driver);
+
+MODULE_AUTHOR("Alexander Gordeev <lasaine@lvk.cs.msu.su>");
+MODULE_DESCRIPTION("parallel port PPS client");
+MODULE_LICENSE("GPL");