diff options
Diffstat (limited to 'drivers/remoteproc/ti_k3_r5_remoteproc.c')
| -rw-r--r-- | drivers/remoteproc/ti_k3_r5_remoteproc.c | 58 |
1 files changed, 56 insertions, 2 deletions
diff --git a/drivers/remoteproc/ti_k3_r5_remoteproc.c b/drivers/remoteproc/ti_k3_r5_remoteproc.c index ad3415a385..50e486bcfa 100644 --- a/drivers/remoteproc/ti_k3_r5_remoteproc.c +++ b/drivers/remoteproc/ti_k3_r5_remoteproc.c @@ -103,12 +103,14 @@ struct k3_r5_soc_data { * @dev: cached device pointer * @mode: Mode to configure the Cluster - Split or LockStep * @cores: list of R5 cores within the cluster + * @core_transition: wait queue to sync core state changes * @soc_data: SoC-specific feature data for a R5FSS */ struct k3_r5_cluster { struct device *dev; enum cluster_mode mode; struct list_head cores; + wait_queue_head_t core_transition; const struct k3_r5_soc_data *soc_data; }; @@ -128,6 +130,7 @@ struct k3_r5_cluster { * @atcm_enable: flag to control ATCM enablement * @btcm_enable: flag to control BTCM enablement * @loczrama: flag to dictate which TCM is at device address 0x0 + * @released_from_reset: flag to signal when core is out of reset */ struct k3_r5_core { struct list_head elem; @@ -144,6 +147,7 @@ struct k3_r5_core { u32 atcm_enable; u32 btcm_enable; u32 loczrama; + bool released_from_reset; }; /** @@ -460,6 +464,8 @@ static int k3_r5_rproc_prepare(struct rproc *rproc) ret); return ret; } + core->released_from_reset = true; + wake_up_interruptible(&cluster->core_transition); /* * Newer IP revisions like on J7200 SoCs support h/w auto-initialization @@ -542,7 +548,7 @@ static int k3_r5_rproc_start(struct rproc *rproc) struct k3_r5_rproc *kproc = rproc->priv; struct k3_r5_cluster *cluster = kproc->cluster; struct device *dev = kproc->dev; - struct k3_r5_core *core; + struct k3_r5_core *core0, *core; u32 boot_addr; int ret; @@ -568,6 +574,16 @@ static int k3_r5_rproc_start(struct rproc *rproc) goto unroll_core_run; } } else { + /* do not allow core 1 to start before core 0 */ + core0 = list_first_entry(&cluster->cores, struct k3_r5_core, + elem); + if (core != core0 && core0->rproc->state == RPROC_OFFLINE) { + dev_err(dev, "%s: can not start core 1 before core 0\n", + __func__); + ret = -EPERM; + goto put_mbox; + } + ret = k3_r5_core_run(core); if (ret) goto put_mbox; @@ -613,7 +629,8 @@ static int k3_r5_rproc_stop(struct rproc *rproc) { struct k3_r5_rproc *kproc = rproc->priv; struct k3_r5_cluster *cluster = kproc->cluster; - struct k3_r5_core *core = kproc->core; + struct device *dev = kproc->dev; + struct k3_r5_core *core1, *core = kproc->core; int ret; /* halt all applicable cores */ @@ -626,6 +643,16 @@ static int k3_r5_rproc_stop(struct rproc *rproc) } } } else { + /* do not allow core 0 to stop before core 1 */ + core1 = list_last_entry(&cluster->cores, struct k3_r5_core, + elem); + if (core != core1 && core1->rproc->state != RPROC_OFFLINE) { + dev_err(dev, "%s: can not stop core 0 before core 1\n", + __func__); + ret = -EPERM; + goto out; + } + ret = k3_r5_core_halt(core); if (ret) goto out; @@ -1140,6 +1167,12 @@ static int k3_r5_rproc_configure_mode(struct k3_r5_rproc *kproc) return ret; } + /* + * Skip the waiting mechanism for sequential power-on of cores if the + * core has already been booted by another entity. + */ + core->released_from_reset = c_state; + ret = ti_sci_proc_get_status(core->tsp, &boot_vec, &cfg, &ctrl, &stat); if (ret < 0) { @@ -1280,6 +1313,26 @@ init_rmem: cluster->mode == CLUSTER_MODE_SINGLECPU || cluster->mode == CLUSTER_MODE_SINGLECORE) break; + + /* + * R5 cores require to be powered on sequentially, core0 + * should be in higher power state than core1 in a cluster + * So, wait for current core to power up before proceeding + * to next core and put timeout of 2sec for each core. + * + * This waiting mechanism is necessary because + * rproc_auto_boot_callback() for core1 can be called before + * core0 due to thread execution order. + */ + ret = wait_event_interruptible_timeout(cluster->core_transition, + core->released_from_reset, + msecs_to_jiffies(2000)); + if (ret <= 0) { + dev_err(dev, + "Timed out waiting for %s core to power up!\n", + rproc->name); + return ret; + } } return 0; @@ -1709,6 +1762,7 @@ static int k3_r5_probe(struct platform_device *pdev) cluster->dev = dev; cluster->soc_data = data; INIT_LIST_HEAD(&cluster->cores); + init_waitqueue_head(&cluster->core_transition); ret = of_property_read_u32(np, "ti,cluster-mode", &cluster->mode); if (ret < 0 && ret != -EINVAL) { |