diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_sli.c')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_sli.c | 22 |
1 files changed, 17 insertions, 5 deletions
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 9386e7b447..706985358c 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -2995,8 +2995,9 @@ lpfc_sli4_unreg_rpi_cmpl_clr(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) LPFC_SLI_INTF_IF_TYPE_2)) { if (ndlp) { lpfc_printf_vlog( - vport, KERN_INFO, LOG_MBOX | LOG_SLI, - "0010 UNREG_LOGIN vpi:%x " + vport, KERN_INFO, + LOG_MBOX | LOG_SLI | LOG_NODE, + "0010 UNREG_LOGIN vpi:x%x " "rpi:%x DID:%x defer x%x flg x%x " "x%px\n", vport->vpi, ndlp->nlp_rpi, @@ -3012,7 +3013,8 @@ lpfc_sli4_unreg_rpi_cmpl_clr(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) (ndlp->nlp_defer_did != NLP_EVT_NOTHING_PENDING)) { lpfc_printf_vlog( - vport, KERN_INFO, LOG_DISCOVERY, + vport, KERN_INFO, + LOG_MBOX | LOG_SLI | LOG_NODE, "4111 UNREG cmpl deferred " "clr x%x on " "NPort x%x Data: x%x x%px\n", @@ -3938,6 +3940,9 @@ void lpfc_poll_eratt(struct timer_list *t) if (!(phba->hba_flag & HBA_SETUP)) return; + if (phba->pport->load_flag & FC_UNLOADING) + return; + /* Here we will also keep track of interrupts per sec of the hba */ sli_intr = phba->sli.slistat.sli_intr; @@ -4875,7 +4880,7 @@ void lpfc_reset_barrier(struct lpfc_hba *phba) lockdep_assert_held(&phba->hbalock); pci_read_config_byte(phba->pcidev, PCI_HEADER_TYPE, &hdrtype); - if (hdrtype != 0x80 || + if (hdrtype != PCI_HEADER_TYPE_MFD || (FC_JEDEC_ID(phba->vpd.rev.biuRev) != HELIOS_JEDEC_ID && FC_JEDEC_ID(phba->vpd.rev.biuRev) != THOR_JEDEC_ID)) return; @@ -10141,11 +10146,12 @@ lpfc_sli_issue_mbox_s4(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq, spin_unlock_irqrestore(&phba->hbalock, iflags); lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI, "(%d):0354 Mbox cmd issue - Enqueue Data: " - "x%x (x%x/x%x) x%x x%x x%x\n", + "x%x (x%x/x%x) x%x x%x x%x x%x\n", mboxq->vport ? mboxq->vport->vpi : 0xffffff, bf_get(lpfc_mqe_command, &mboxq->u.mqe), lpfc_sli_config_mbox_subsys_get(phba, mboxq), lpfc_sli_config_mbox_opcode_get(phba, mboxq), + mboxq->u.mb.un.varUnregLogin.rpi, phba->pport->port_state, psli->sli_flag, MBX_NOWAIT); /* Wake up worker thread to transport mailbox command from head */ @@ -22167,6 +22173,12 @@ struct lpfc_io_buf *lpfc_get_io_buf(struct lpfc_hba *phba, * The data will be truncated if datasz is not large enough. * Version 1 is not supported with Embedded mbox cmd, so we must use version 0. * Returns the actual bytes read from the object. + * + * This routine is hard coded to use a poll completion. Unlike other + * sli4_config mailboxes, it uses lpfc_mbuf memory which is not + * cleaned up in lpfc_sli4_cmd_mbox_free. If this routine is modified + * to use interrupt-based completions, code is needed to fully cleanup + * the memory. */ int lpfc_read_object(struct lpfc_hba *phba, char *rdobject, uint32_t *datap, |