1 files changed, 41 insertions, 33 deletions

diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index ffd7e7e729..8300fc28cb 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -227,7 +227,7 @@ static int scsi_realloc_sdev_budget_map(struct scsi_device *sdev,
 
 	/*
 	 * realloc if new shift is calculated, which is caused by setting
-	 * up one new default queue depth after calling ->slave_configure
+	 * up one new default queue depth after calling ->device_configure
 	 */
 	if (!need_alloc && new_shift != sdev->budget_map.shift)
 		need_alloc = need_free = true;
@@ -283,6 +283,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
 	struct request_queue *q;
 	int display_failure_msg = 1, ret;
 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+	struct queue_limits lim;
 
 	sdev = kzalloc(sizeof(*sdev) + shost->transportt->device_size,
 		       GFP_KERNEL);
@@ -332,7 +333,8 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
 
 	sdev->sg_reserved_size = INT_MAX;
 
-	q = blk_mq_alloc_queue(&sdev->host->tag_set, NULL, NULL);
+	scsi_init_limits(shost, &lim);
+	q = blk_mq_alloc_queue(&sdev->host->tag_set, &lim, NULL);
 	if (IS_ERR(q)) {
 		/* release fn is set up in scsi_sysfs_device_initialise, so
 		 * have to free and put manually here */
@@ -343,7 +345,6 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
 	kref_get(&sdev->host->tagset_refcnt);
 	sdev->request_queue = q;
 	q->queuedata = sdev;
-	__scsi_init_queue(sdev->host, q);
 
 	depth = sdev->host->cmd_per_lun ?: 1;
 
@@ -873,6 +874,8 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result,
 static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
 		blist_flags_t *bflags, int async)
 {
+	const struct scsi_host_template *hostt = sdev->host->hostt;
+	struct queue_limits lim;
 	int ret;
 
 	/*
@@ -1004,19 +1007,6 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
 		sdev->select_no_atn = 1;
 
 	/*
-	 * Maximum 512 sector transfer length
-	 * broken RA4x00 Compaq Disk Array
-	 */
-	if (*bflags & BLIST_MAX_512)
-		blk_queue_max_hw_sectors(sdev->request_queue, 512);
-	/*
-	 * Max 1024 sector transfer length for targets that report incorrect
-	 * max/optimal lengths and relied on the old block layer safe default
-	 */
-	else if (*bflags & BLIST_MAX_1024)
-		blk_queue_max_hw_sectors(sdev->request_queue, 1024);
-
-	/*
 	 * Some devices may not want to have a start command automatically
 	 * issued when a device is added.
 	 */
@@ -1076,28 +1066,46 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
 
 	transport_configure_device(&sdev->sdev_gendev);
 
-	if (sdev->host->hostt->slave_configure) {
-		ret = sdev->host->hostt->slave_configure(sdev);
-		if (ret) {
-			/*
-			 * if LLDD reports slave not present, don't clutter
-			 * console with alloc failure messages
-			 */
-			if (ret != -ENXIO) {
-				sdev_printk(KERN_ERR, sdev,
-					"failed to configure device\n");
-			}
-			return SCSI_SCAN_NO_RESPONSE;
-		}
+	/*
+	 * No need to freeze the queue as it isn't reachable to anyone else yet.
+	 */
+	lim = queue_limits_start_update(sdev->request_queue);
+	if (*bflags & BLIST_MAX_512)
+		lim.max_hw_sectors = 512;
+	else if (*bflags & BLIST_MAX_1024)
+		lim.max_hw_sectors = 1024;
 
+	if (hostt->device_configure)
+		ret = hostt->device_configure(sdev, &lim);
+	else if (hostt->slave_configure)
+		ret = hostt->slave_configure(sdev);
+	if (ret) {
+		queue_limits_cancel_update(sdev->request_queue);
 		/*
-		 * The queue_depth is often changed in ->slave_configure.
-		 * Set up budget map again since memory consumption of
-		 * the map depends on actual queue depth.
+		 * If the LLDD reports device not present, don't clutter the
+		 * console with failure messages.
 		 */
-		scsi_realloc_sdev_budget_map(sdev, sdev->queue_depth);
+		if (ret != -ENXIO)
+			sdev_printk(KERN_ERR, sdev,
+				"failed to configure device\n");
+		return SCSI_SCAN_NO_RESPONSE;
 	}
 
+	ret = queue_limits_commit_update(sdev->request_queue, &lim);
+	if (ret) {
+		sdev_printk(KERN_ERR, sdev, "failed to apply queue limits.\n");
+		return SCSI_SCAN_NO_RESPONSE;
+	}
+
+	/*
+	 * The queue_depth is often changed in ->device_configure.
+	 *
+	 * Set up budget map again since memory consumption of the map depends
+	 * on actual queue depth.
+	 */
+	if (hostt->device_configure || hostt->slave_configure)
+		scsi_realloc_sdev_budget_map(sdev, sdev->queue_depth);
+
 	if (sdev->scsi_level >= SCSI_3)
 		scsi_attach_vpd(sdev);