diff options
Diffstat (limited to 'drivers/soc/mediatek/mtk-mmsys.h')
-rw-r--r-- | drivers/soc/mediatek/mtk-mmsys.h | 32 |
1 files changed, 32 insertions, 0 deletions
diff --git a/drivers/soc/mediatek/mtk-mmsys.h b/drivers/soc/mediatek/mtk-mmsys.h index 6725403d2e..d370192737 100644 --- a/drivers/soc/mediatek/mtk-mmsys.h +++ b/drivers/soc/mediatek/mtk-mmsys.h @@ -78,6 +78,8 @@ #define DSI_SEL_IN_RDMA 0x1 #define DSI_SEL_IN_MASK 0x1 +#define MMSYS_RST_NR(bank, bit) (((bank) * 32) + (bit)) + struct mtk_mmsys_routes { u32 from_comp; u32 to_comp; @@ -86,13 +88,43 @@ struct mtk_mmsys_routes { u32 val; }; +/** + * struct mtk_mmsys_driver_data - Settings of the mmsys + * @clk_driver: Clock driver name that the mmsys is using + * (defined in drivers/clk/mediatek/clk-*.c). + * @routes: Routing table of the mmsys. + * It provides mux settings from one module to another. + * @num_routes: Array size of the routes. + * @sw0_rst_offset: Register offset for the reset control. + * @num_resets: Number of reset bits that are defined + * @is_vppsys: Whether the mmsys is VPPSYS (Video Processing Pipe) + * or VDOSYS (Video). Only VDOSYS needs to be added to drm driver. + * @vsync_len: VSYNC length of the MIXER. + * VSYNC is usually triggered by the connector, so its length is a + * fixed value when the frame rate is decided, but ETHDR and + * MIXER generate their own VSYNC due to hardware design, therefore + * MIXER has to sync with ETHDR by adjusting VSYNC length. + * On MT8195, there is no such setting so we use the gap between + * falling edge and rising edge of SOF (Start of Frame) signal to + * do the job, but since MT8188, VSYNC_LEN setting is introduced to + * solve the problem and is given 0x40 (ticks) as the default value. + * Please notice that this value has to be set to 1 (minimum) if + * ETHDR is bypassed, otherwise MIXER could wait too long and causing + * underflow. + * + * Each MMSYS (multi-media system) may have different settings, they may use + * different clock sources, mux settings, reset control ...etc., and these + * differences are all stored here. + */ struct mtk_mmsys_driver_data { const char *clk_driver; const struct mtk_mmsys_routes *routes; const unsigned int num_routes; const u16 sw0_rst_offset; + const u8 *rst_tb; const u32 num_resets; const bool is_vppsys; + const u8 vsync_len; }; /* |