summaryrefslogtreecommitdiffstats
path: root/drivers/soc/ti/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/soc/ti/Kconfig')
-rw-r--r--drivers/soc/ti/Kconfig103
1 files changed, 103 insertions, 0 deletions
diff --git a/drivers/soc/ti/Kconfig b/drivers/soc/ti/Kconfig
new file mode 100644
index 0000000000..2cae17b65f
--- /dev/null
+++ b/drivers/soc/ti/Kconfig
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+#
+# TI SOC drivers
+#
+menuconfig SOC_TI
+ bool "TI SOC drivers support"
+
+if SOC_TI
+
+config KEYSTONE_NAVIGATOR_QMSS
+ tristate "Keystone Queue Manager Sub System"
+ depends on ARCH_KEYSTONE
+ help
+ Say y here to support the Keystone multicore Navigator Queue
+ Manager support. The Queue Manager is a hardware module that
+ is responsible for accelerating management of the packet queues.
+ Packets are queued/de-queued by writing/reading descriptor address
+ to a particular memory mapped location in the Queue Manager module.
+
+ If unsure, say N.
+
+config KEYSTONE_NAVIGATOR_DMA
+ tristate "TI Keystone Navigator Packet DMA support"
+ depends on ARCH_KEYSTONE
+ help
+ Say y tp enable support for the Keystone Navigator Packet DMA on
+ on Keystone family of devices. It sets up the dma channels for the
+ Queue Manager Sub System.
+
+ If unsure, say N.
+
+config AMX3_PM
+ tristate "AMx3 Power Management"
+ depends on SOC_AM33XX || SOC_AM43XX
+ depends on WKUP_M3_IPC && TI_EMIF_SRAM && SRAM && RTC_DRV_OMAP
+ help
+ Enable power management on AM335x and AM437x. Required for suspend to mem
+ and standby states on both AM335x and AM437x platforms and for deeper cpuidle
+ c-states on AM335x. Also required for rtc and ddr in self-refresh low
+ power mode on AM437x platforms.
+
+config WKUP_M3_IPC
+ tristate "TI AMx3 Wkup-M3 IPC Driver"
+ depends on WKUP_M3_RPROC
+ depends on OMAP2PLUS_MBOX
+ help
+ TI AM33XX and AM43XX have a Cortex M3, the Wakeup M3, to handle
+ low power transitions. This IPC driver provides the necessary API
+ to communicate and use the Wakeup M3 for PM features like suspend
+ resume and boots it using wkup_m3_rproc driver.
+
+config TI_SCI_PM_DOMAINS
+ tristate "TI SCI PM Domains Driver"
+ depends on TI_SCI_PROTOCOL
+ depends on PM_GENERIC_DOMAINS
+ help
+ Generic power domain implementation for TI device implementing
+ the TI SCI protocol.
+
+ To compile this as a module, choose M here. The module will be
+ called ti_sci_pm_domains. Note this is needed early in boot before
+ rootfs may be available.
+
+config TI_K3_RINGACC
+ tristate "K3 Ring accelerator Sub System"
+ depends on ARCH_K3 || COMPILE_TEST
+ depends on TI_SCI_INTA_IRQCHIP
+ help
+ Say y here to support the K3 Ring accelerator module.
+ The Ring Accelerator (RINGACC or RA) provides hardware acceleration
+ to enable straightforward passing of work between a producer
+ and a consumer. There is one RINGACC module per NAVSS on TI AM65x SoCs
+ If unsure, say N.
+
+config TI_K3_SOCINFO
+ bool
+ depends on ARCH_K3 || COMPILE_TEST
+ select SOC_BUS
+ select MFD_SYSCON
+ help
+ Include support for the SoC bus socinfo for the TI K3 Multicore SoC
+ platforms to provide information about the SoC family and
+ variant to user space.
+
+config TI_PRUSS
+ tristate "TI PRU-ICSS Subsystem Platform drivers"
+ depends on SOC_AM33XX || SOC_AM43XX || SOC_DRA7XX || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
+ select MFD_SYSCON
+ help
+ TI PRU-ICSS Subsystem platform specific support.
+
+ Say Y or M here to support the Programmable Realtime Unit (PRU)
+ processors on various TI SoCs. It's safe to say N here if you're
+ not interested in the PRU or if you are unsure.
+
+endif # SOC_TI
+
+config TI_SCI_INTA_MSI_DOMAIN
+ bool
+ select GENERIC_MSI_IRQ
+ help
+ Driver to enable Interrupt Aggregator specific MSI Domain.