summaryrefslogtreecommitdiffstats
path: root/drivers/soc/ti/pm33xx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/soc/ti/pm33xx.c')
-rw-r--r--drivers/soc/ti/pm33xx.c611
1 files changed, 611 insertions, 0 deletions
diff --git a/drivers/soc/ti/pm33xx.c b/drivers/soc/ti/pm33xx.c
new file mode 100644
index 0000000000..f04c211579
--- /dev/null
+++ b/drivers/soc/ti/pm33xx.c
@@ -0,0 +1,611 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AM33XX Power Management Routines
+ *
+ * Copyright (C) 2012-2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Vaibhav Bedia, Dave Gerlach
+ */
+
+#include <linux/clk.h>
+#include <linux/cpu.h>
+#include <linux/err.h>
+#include <linux/genalloc.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_data/pm33xx.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/rtc.h>
+#include <linux/rtc/rtc-omap.h>
+#include <linux/sizes.h>
+#include <linux/sram.h>
+#include <linux/suspend.h>
+#include <linux/ti-emif-sram.h>
+#include <linux/wkup_m3_ipc.h>
+
+#include <asm/proc-fns.h>
+#include <asm/suspend.h>
+#include <asm/system_misc.h>
+
+#define AMX3_PM_SRAM_SYMBOL_OFFSET(sym) ((unsigned long)(sym) - \
+ (unsigned long)pm_sram->do_wfi)
+
+#define RTC_SCRATCH_RESUME_REG 0
+#define RTC_SCRATCH_MAGIC_REG 1
+#define RTC_REG_BOOT_MAGIC 0x8cd0 /* RTC */
+#define GIC_INT_SET_PENDING_BASE 0x200
+#define AM43XX_GIC_DIST_BASE 0x48241000
+
+static void __iomem *rtc_base_virt;
+static struct clk *rtc_fck;
+static u32 rtc_magic_val;
+
+static int (*am33xx_do_wfi_sram)(unsigned long unused);
+static phys_addr_t am33xx_do_wfi_sram_phys;
+
+static struct gen_pool *sram_pool, *sram_pool_data;
+static unsigned long ocmcram_location, ocmcram_location_data;
+
+static struct rtc_device *omap_rtc;
+static void __iomem *gic_dist_base;
+
+static struct am33xx_pm_platform_data *pm_ops;
+static struct am33xx_pm_sram_addr *pm_sram;
+
+static struct device *pm33xx_dev;
+static struct wkup_m3_ipc *m3_ipc;
+
+#ifdef CONFIG_SUSPEND
+static int rtc_only_idle;
+static int retrigger_irq;
+static unsigned long suspend_wfi_flags;
+
+static struct wkup_m3_wakeup_src wakeup_src = {.irq_nr = 0,
+ .src = "Unknown",
+};
+
+static struct wkup_m3_wakeup_src rtc_alarm_wakeup = {
+ .irq_nr = 108, .src = "RTC Alarm",
+};
+
+static struct wkup_m3_wakeup_src rtc_ext_wakeup = {
+ .irq_nr = 0, .src = "Ext wakeup",
+};
+#endif
+
+static u32 sram_suspend_address(unsigned long addr)
+{
+ return ((unsigned long)am33xx_do_wfi_sram +
+ AMX3_PM_SRAM_SYMBOL_OFFSET(addr));
+}
+
+static int am33xx_push_sram_idle(void)
+{
+ struct am33xx_pm_ro_sram_data ro_sram_data;
+ int ret;
+ u32 table_addr, ro_data_addr;
+ void *copy_addr;
+
+ ro_sram_data.amx3_pm_sram_data_virt = ocmcram_location_data;
+ ro_sram_data.amx3_pm_sram_data_phys =
+ gen_pool_virt_to_phys(sram_pool_data, ocmcram_location_data);
+ ro_sram_data.rtc_base_virt = rtc_base_virt;
+
+ /* Save physical address to calculate resume offset during pm init */
+ am33xx_do_wfi_sram_phys = gen_pool_virt_to_phys(sram_pool,
+ ocmcram_location);
+
+ am33xx_do_wfi_sram = sram_exec_copy(sram_pool, (void *)ocmcram_location,
+ pm_sram->do_wfi,
+ *pm_sram->do_wfi_sz);
+ if (!am33xx_do_wfi_sram) {
+ dev_err(pm33xx_dev,
+ "PM: %s: am33xx_do_wfi copy to sram failed\n",
+ __func__);
+ return -ENODEV;
+ }
+
+ table_addr =
+ sram_suspend_address((unsigned long)pm_sram->emif_sram_table);
+ ret = ti_emif_copy_pm_function_table(sram_pool, (void *)table_addr);
+ if (ret) {
+ dev_dbg(pm33xx_dev,
+ "PM: %s: EMIF function copy failed\n", __func__);
+ return -EPROBE_DEFER;
+ }
+
+ ro_data_addr =
+ sram_suspend_address((unsigned long)pm_sram->ro_sram_data);
+ copy_addr = sram_exec_copy(sram_pool, (void *)ro_data_addr,
+ &ro_sram_data,
+ sizeof(ro_sram_data));
+ if (!copy_addr) {
+ dev_err(pm33xx_dev,
+ "PM: %s: ro_sram_data copy to sram failed\n",
+ __func__);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int am33xx_do_sram_idle(u32 wfi_flags)
+{
+ if (!m3_ipc || !pm_ops)
+ return 0;
+
+ if (wfi_flags & WFI_FLAG_WAKE_M3)
+ m3_ipc->ops->prepare_low_power(m3_ipc, WKUP_M3_IDLE);
+
+ return pm_ops->cpu_suspend(am33xx_do_wfi_sram, wfi_flags);
+}
+
+static int __init am43xx_map_gic(void)
+{
+ gic_dist_base = ioremap(AM43XX_GIC_DIST_BASE, SZ_4K);
+
+ if (!gic_dist_base)
+ return -ENOMEM;
+
+ return 0;
+}
+
+#ifdef CONFIG_SUSPEND
+static struct wkup_m3_wakeup_src rtc_wake_src(void)
+{
+ u32 i;
+
+ i = __raw_readl(rtc_base_virt + 0x44) & 0x40;
+
+ if (i) {
+ retrigger_irq = rtc_alarm_wakeup.irq_nr;
+ return rtc_alarm_wakeup;
+ }
+
+ retrigger_irq = rtc_ext_wakeup.irq_nr;
+
+ return rtc_ext_wakeup;
+}
+
+static int am33xx_rtc_only_idle(unsigned long wfi_flags)
+{
+ omap_rtc_power_off_program(&omap_rtc->dev);
+ am33xx_do_wfi_sram(wfi_flags);
+ return 0;
+}
+
+/*
+ * Note that the RTC module clock must be re-enabled only for rtc+ddr suspend.
+ * And looks like the module can stay in SYSC_IDLE_SMART_WKUP mode configured
+ * by the interconnect code just fine for both rtc+ddr suspend and retention
+ * suspend.
+ */
+static int am33xx_pm_suspend(suspend_state_t suspend_state)
+{
+ int i, ret = 0;
+
+ if (suspend_state == PM_SUSPEND_MEM &&
+ pm_ops->check_off_mode_enable()) {
+ ret = clk_prepare_enable(rtc_fck);
+ if (ret) {
+ dev_err(pm33xx_dev, "Failed to enable clock: %i\n", ret);
+ return ret;
+ }
+
+ pm_ops->save_context();
+ suspend_wfi_flags |= WFI_FLAG_RTC_ONLY;
+ clk_save_context();
+ ret = pm_ops->soc_suspend(suspend_state, am33xx_rtc_only_idle,
+ suspend_wfi_flags);
+
+ suspend_wfi_flags &= ~WFI_FLAG_RTC_ONLY;
+ dev_info(pm33xx_dev, "Entering RTC Only mode with DDR in self-refresh\n");
+
+ if (!ret) {
+ clk_restore_context();
+ pm_ops->restore_context();
+ m3_ipc->ops->set_rtc_only(m3_ipc);
+ am33xx_push_sram_idle();
+ }
+ } else {
+ ret = pm_ops->soc_suspend(suspend_state, am33xx_do_wfi_sram,
+ suspend_wfi_flags);
+ }
+
+ if (ret) {
+ dev_err(pm33xx_dev, "PM: Kernel suspend failure\n");
+ } else {
+ i = m3_ipc->ops->request_pm_status(m3_ipc);
+
+ switch (i) {
+ case 0:
+ dev_info(pm33xx_dev,
+ "PM: Successfully put all powerdomains to target state\n");
+ break;
+ case 1:
+ dev_err(pm33xx_dev,
+ "PM: Could not transition all powerdomains to target state\n");
+ ret = -1;
+ break;
+ default:
+ dev_err(pm33xx_dev,
+ "PM: CM3 returned unknown result = %d\n", i);
+ ret = -1;
+ }
+
+ /* print the wakeup reason */
+ if (rtc_only_idle) {
+ wakeup_src = rtc_wake_src();
+ pr_info("PM: Wakeup source %s\n", wakeup_src.src);
+ } else {
+ pr_info("PM: Wakeup source %s\n",
+ m3_ipc->ops->request_wake_src(m3_ipc));
+ }
+ }
+
+ if (suspend_state == PM_SUSPEND_MEM && pm_ops->check_off_mode_enable())
+ clk_disable_unprepare(rtc_fck);
+
+ return ret;
+}
+
+static int am33xx_pm_enter(suspend_state_t suspend_state)
+{
+ int ret = 0;
+
+ switch (suspend_state) {
+ case PM_SUSPEND_MEM:
+ case PM_SUSPEND_STANDBY:
+ ret = am33xx_pm_suspend(suspend_state);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static int am33xx_pm_begin(suspend_state_t state)
+{
+ int ret = -EINVAL;
+ struct nvmem_device *nvmem;
+
+ if (state == PM_SUSPEND_MEM && pm_ops->check_off_mode_enable()) {
+ nvmem = devm_nvmem_device_get(&omap_rtc->dev,
+ "omap_rtc_scratch0");
+ if (!IS_ERR(nvmem))
+ nvmem_device_write(nvmem, RTC_SCRATCH_MAGIC_REG * 4, 4,
+ (void *)&rtc_magic_val);
+ rtc_only_idle = 1;
+ } else {
+ rtc_only_idle = 0;
+ }
+
+ pm_ops->begin_suspend();
+
+ switch (state) {
+ case PM_SUSPEND_MEM:
+ ret = m3_ipc->ops->prepare_low_power(m3_ipc, WKUP_M3_DEEPSLEEP);
+ break;
+ case PM_SUSPEND_STANDBY:
+ ret = m3_ipc->ops->prepare_low_power(m3_ipc, WKUP_M3_STANDBY);
+ break;
+ }
+
+ return ret;
+}
+
+static void am33xx_pm_end(void)
+{
+ u32 val = 0;
+ struct nvmem_device *nvmem;
+
+ nvmem = devm_nvmem_device_get(&omap_rtc->dev, "omap_rtc_scratch0");
+ if (IS_ERR(nvmem))
+ return;
+
+ m3_ipc->ops->finish_low_power(m3_ipc);
+ if (rtc_only_idle) {
+ if (retrigger_irq) {
+ /*
+ * 32 bits of Interrupt Set-Pending correspond to 32
+ * 32 interrupts. Compute the bit offset of the
+ * Interrupt and set that particular bit
+ * Compute the register offset by dividing interrupt
+ * number by 32 and mutiplying by 4
+ */
+ writel_relaxed(1 << (retrigger_irq & 31),
+ gic_dist_base + GIC_INT_SET_PENDING_BASE
+ + retrigger_irq / 32 * 4);
+ }
+
+ nvmem_device_write(nvmem, RTC_SCRATCH_MAGIC_REG * 4, 4,
+ (void *)&val);
+ }
+
+ rtc_only_idle = 0;
+
+ pm_ops->finish_suspend();
+}
+
+static int am33xx_pm_valid(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ case PM_SUSPEND_MEM:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+static const struct platform_suspend_ops am33xx_pm_ops = {
+ .begin = am33xx_pm_begin,
+ .end = am33xx_pm_end,
+ .enter = am33xx_pm_enter,
+ .valid = am33xx_pm_valid,
+};
+#endif /* CONFIG_SUSPEND */
+
+static void am33xx_pm_set_ipc_ops(void)
+{
+ u32 resume_address;
+ int temp;
+
+ temp = ti_emif_get_mem_type();
+ if (temp < 0) {
+ dev_err(pm33xx_dev, "PM: Cannot determine memory type, no PM available\n");
+ return;
+ }
+ m3_ipc->ops->set_mem_type(m3_ipc, temp);
+
+ /* Physical resume address to be used by ROM code */
+ resume_address = am33xx_do_wfi_sram_phys +
+ *pm_sram->resume_offset + 0x4;
+
+ m3_ipc->ops->set_resume_address(m3_ipc, (void *)resume_address);
+}
+
+static void am33xx_pm_free_sram(void)
+{
+ gen_pool_free(sram_pool, ocmcram_location, *pm_sram->do_wfi_sz);
+ gen_pool_free(sram_pool_data, ocmcram_location_data,
+ sizeof(struct am33xx_pm_ro_sram_data));
+}
+
+/*
+ * Push the minimal suspend-resume code to SRAM
+ */
+static int am33xx_pm_alloc_sram(void)
+{
+ struct device_node *np;
+ int ret = 0;
+
+ np = of_find_compatible_node(NULL, NULL, "ti,omap3-mpu");
+ if (!np) {
+ np = of_find_compatible_node(NULL, NULL, "ti,omap4-mpu");
+ if (!np) {
+ dev_err(pm33xx_dev, "PM: %s: Unable to find device node for mpu\n",
+ __func__);
+ return -ENODEV;
+ }
+ }
+
+ sram_pool = of_gen_pool_get(np, "pm-sram", 0);
+ if (!sram_pool) {
+ dev_err(pm33xx_dev, "PM: %s: Unable to get sram pool for ocmcram\n",
+ __func__);
+ ret = -ENODEV;
+ goto mpu_put_node;
+ }
+
+ sram_pool_data = of_gen_pool_get(np, "pm-sram", 1);
+ if (!sram_pool_data) {
+ dev_err(pm33xx_dev, "PM: %s: Unable to get sram data pool for ocmcram\n",
+ __func__);
+ ret = -ENODEV;
+ goto mpu_put_node;
+ }
+
+ ocmcram_location = gen_pool_alloc(sram_pool, *pm_sram->do_wfi_sz);
+ if (!ocmcram_location) {
+ dev_err(pm33xx_dev, "PM: %s: Unable to allocate memory from ocmcram\n",
+ __func__);
+ ret = -ENOMEM;
+ goto mpu_put_node;
+ }
+
+ ocmcram_location_data = gen_pool_alloc(sram_pool_data,
+ sizeof(struct emif_regs_amx3));
+ if (!ocmcram_location_data) {
+ dev_err(pm33xx_dev, "PM: Unable to allocate memory from ocmcram\n");
+ gen_pool_free(sram_pool, ocmcram_location, *pm_sram->do_wfi_sz);
+ ret = -ENOMEM;
+ }
+
+mpu_put_node:
+ of_node_put(np);
+ return ret;
+}
+
+static int am33xx_pm_rtc_setup(void)
+{
+ struct device_node *np;
+ unsigned long val = 0;
+ struct nvmem_device *nvmem;
+ int error;
+
+ np = of_find_node_by_name(NULL, "rtc");
+
+ if (of_device_is_available(np)) {
+ /* RTC interconnect target module clock */
+ rtc_fck = of_clk_get_by_name(np->parent, "fck");
+ if (IS_ERR(rtc_fck))
+ return PTR_ERR(rtc_fck);
+
+ rtc_base_virt = of_iomap(np, 0);
+ if (!rtc_base_virt) {
+ pr_warn("PM: could not iomap rtc");
+ error = -ENODEV;
+ goto err_clk_put;
+ }
+
+ omap_rtc = rtc_class_open("rtc0");
+ if (!omap_rtc) {
+ pr_warn("PM: rtc0 not available");
+ error = -EPROBE_DEFER;
+ goto err_iounmap;
+ }
+
+ nvmem = devm_nvmem_device_get(&omap_rtc->dev,
+ "omap_rtc_scratch0");
+ if (!IS_ERR(nvmem)) {
+ nvmem_device_read(nvmem, RTC_SCRATCH_MAGIC_REG * 4,
+ 4, (void *)&rtc_magic_val);
+ if ((rtc_magic_val & 0xffff) != RTC_REG_BOOT_MAGIC)
+ pr_warn("PM: bootloader does not support rtc-only!\n");
+
+ nvmem_device_write(nvmem, RTC_SCRATCH_MAGIC_REG * 4,
+ 4, (void *)&val);
+ val = pm_sram->resume_address;
+ nvmem_device_write(nvmem, RTC_SCRATCH_RESUME_REG * 4,
+ 4, (void *)&val);
+ }
+ } else {
+ pr_warn("PM: no-rtc available, rtc-only mode disabled.\n");
+ }
+
+ return 0;
+
+err_iounmap:
+ iounmap(rtc_base_virt);
+err_clk_put:
+ clk_put(rtc_fck);
+
+ return error;
+}
+
+static int am33xx_pm_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ if (!of_machine_is_compatible("ti,am33xx") &&
+ !of_machine_is_compatible("ti,am43"))
+ return -ENODEV;
+
+ pm_ops = dev->platform_data;
+ if (!pm_ops) {
+ dev_err(dev, "PM: Cannot get core PM ops!\n");
+ return -ENODEV;
+ }
+
+ ret = am43xx_map_gic();
+ if (ret) {
+ pr_err("PM: Could not ioremap GIC base\n");
+ return ret;
+ }
+
+ pm_sram = pm_ops->get_sram_addrs();
+ if (!pm_sram) {
+ dev_err(dev, "PM: Cannot get PM asm function addresses!!\n");
+ return -ENODEV;
+ }
+
+ m3_ipc = wkup_m3_ipc_get();
+ if (!m3_ipc) {
+ pr_err("PM: Cannot get wkup_m3_ipc handle\n");
+ return -EPROBE_DEFER;
+ }
+
+ pm33xx_dev = dev;
+
+ ret = am33xx_pm_alloc_sram();
+ if (ret)
+ goto err_wkup_m3_ipc_put;
+
+ ret = am33xx_pm_rtc_setup();
+ if (ret)
+ goto err_free_sram;
+
+ ret = am33xx_push_sram_idle();
+ if (ret)
+ goto err_unsetup_rtc;
+
+ am33xx_pm_set_ipc_ops();
+
+#ifdef CONFIG_SUSPEND
+ suspend_set_ops(&am33xx_pm_ops);
+
+ /*
+ * For a system suspend we must flush the caches, we want
+ * the DDR in self-refresh, we want to save the context
+ * of the EMIF, and we want the wkup_m3 to handle low-power
+ * transition.
+ */
+ suspend_wfi_flags |= WFI_FLAG_FLUSH_CACHE;
+ suspend_wfi_flags |= WFI_FLAG_SELF_REFRESH;
+ suspend_wfi_flags |= WFI_FLAG_SAVE_EMIF;
+ suspend_wfi_flags |= WFI_FLAG_WAKE_M3;
+#endif /* CONFIG_SUSPEND */
+
+ pm_runtime_enable(dev);
+ ret = pm_runtime_resume_and_get(dev);
+ if (ret < 0)
+ goto err_pm_runtime_disable;
+
+ ret = pm_ops->init(am33xx_do_sram_idle);
+ if (ret) {
+ dev_err(dev, "Unable to call core pm init!\n");
+ ret = -ENODEV;
+ goto err_pm_runtime_put;
+ }
+
+ return 0;
+
+err_pm_runtime_put:
+ pm_runtime_put_sync(dev);
+err_pm_runtime_disable:
+ pm_runtime_disable(dev);
+err_unsetup_rtc:
+ iounmap(rtc_base_virt);
+ clk_put(rtc_fck);
+err_free_sram:
+ am33xx_pm_free_sram();
+ pm33xx_dev = NULL;
+err_wkup_m3_ipc_put:
+ wkup_m3_ipc_put(m3_ipc);
+ return ret;
+}
+
+static int am33xx_pm_remove(struct platform_device *pdev)
+{
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ if (pm_ops->deinit)
+ pm_ops->deinit();
+ suspend_set_ops(NULL);
+ wkup_m3_ipc_put(m3_ipc);
+ am33xx_pm_free_sram();
+ iounmap(rtc_base_virt);
+ clk_put(rtc_fck);
+ return 0;
+}
+
+static struct platform_driver am33xx_pm_driver = {
+ .driver = {
+ .name = "pm33xx",
+ },
+ .probe = am33xx_pm_probe,
+ .remove = am33xx_pm_remove,
+};
+module_platform_driver(am33xx_pm_driver);
+
+MODULE_ALIAS("platform:pm33xx");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("am33xx power management driver");