summaryrefslogtreecommitdiffstats
path: root/drivers/spi/spi-rb4xx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi/spi-rb4xx.c')
-rw-r--r--drivers/spi/spi-rb4xx.c211
1 files changed, 211 insertions, 0 deletions
diff --git a/drivers/spi/spi-rb4xx.c b/drivers/spi/spi-rb4xx.c
new file mode 100644
index 0000000000..225f755507
--- /dev/null
+++ b/drivers/spi/spi-rb4xx.c
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SPI controller driver for the Mikrotik RB4xx boards
+ *
+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2015 Bert Vermeulen <bert@biot.com>
+ *
+ * This file was based on the patches for Linux 2.6.27.39 published by
+ * MikroTik for their RouterBoard 4xx series devices.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/spi/spi.h>
+#include <linux/of.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+struct rb4xx_spi {
+ void __iomem *base;
+ struct clk *clk;
+};
+
+static inline u32 rb4xx_read(struct rb4xx_spi *rbspi, u32 reg)
+{
+ return __raw_readl(rbspi->base + reg);
+}
+
+static inline void rb4xx_write(struct rb4xx_spi *rbspi, u32 reg, u32 value)
+{
+ __raw_writel(value, rbspi->base + reg);
+}
+
+static inline void do_spi_clk(struct rb4xx_spi *rbspi, u32 spi_ioc, int value)
+{
+ u32 regval;
+
+ regval = spi_ioc;
+ if (value & BIT(0))
+ regval |= AR71XX_SPI_IOC_DO;
+
+ rb4xx_write(rbspi, AR71XX_SPI_REG_IOC, regval);
+ rb4xx_write(rbspi, AR71XX_SPI_REG_IOC, regval | AR71XX_SPI_IOC_CLK);
+}
+
+static void do_spi_byte(struct rb4xx_spi *rbspi, u32 spi_ioc, u8 byte)
+{
+ int i;
+
+ for (i = 7; i >= 0; i--)
+ do_spi_clk(rbspi, spi_ioc, byte >> i);
+}
+
+/* The CS2 pin is used to clock in a second bit per clock cycle. */
+static inline void do_spi_clk_two(struct rb4xx_spi *rbspi, u32 spi_ioc,
+ u8 value)
+{
+ u32 regval;
+
+ regval = spi_ioc;
+ if (value & BIT(1))
+ regval |= AR71XX_SPI_IOC_DO;
+ if (value & BIT(0))
+ regval |= AR71XX_SPI_IOC_CS2;
+
+ rb4xx_write(rbspi, AR71XX_SPI_REG_IOC, regval);
+ rb4xx_write(rbspi, AR71XX_SPI_REG_IOC, regval | AR71XX_SPI_IOC_CLK);
+}
+
+/* Two bits at a time, msb first */
+static void do_spi_byte_two(struct rb4xx_spi *rbspi, u32 spi_ioc, u8 byte)
+{
+ do_spi_clk_two(rbspi, spi_ioc, byte >> 6);
+ do_spi_clk_two(rbspi, spi_ioc, byte >> 4);
+ do_spi_clk_two(rbspi, spi_ioc, byte >> 2);
+ do_spi_clk_two(rbspi, spi_ioc, byte >> 0);
+}
+
+static void rb4xx_set_cs(struct spi_device *spi, bool enable)
+{
+ struct rb4xx_spi *rbspi = spi_controller_get_devdata(spi->controller);
+
+ /*
+ * Setting CS is done along with bitbanging the actual values,
+ * since it's all on the same hardware register. However the
+ * CPLD needs CS deselected after every command.
+ */
+ if (enable)
+ rb4xx_write(rbspi, AR71XX_SPI_REG_IOC,
+ AR71XX_SPI_IOC_CS0 | AR71XX_SPI_IOC_CS1);
+}
+
+static int rb4xx_transfer_one(struct spi_controller *host,
+ struct spi_device *spi, struct spi_transfer *t)
+{
+ struct rb4xx_spi *rbspi = spi_controller_get_devdata(host);
+ int i;
+ u32 spi_ioc;
+ u8 *rx_buf;
+ const u8 *tx_buf;
+
+ /*
+ * Prime the SPI register with the SPI device selected. The m25p80 boot
+ * flash and CPLD share the CS0 pin. This works because the CPLD's
+ * command set was designed to almost not clash with that of the
+ * boot flash.
+ */
+ if (spi_get_chipselect(spi, 0) == 2)
+ /* MMC */
+ spi_ioc = AR71XX_SPI_IOC_CS0;
+ else
+ /* Boot flash and CPLD */
+ spi_ioc = AR71XX_SPI_IOC_CS1;
+
+ tx_buf = t->tx_buf;
+ rx_buf = t->rx_buf;
+ for (i = 0; i < t->len; ++i) {
+ if (t->tx_nbits == SPI_NBITS_DUAL)
+ /* CPLD can use two-wire transfers */
+ do_spi_byte_two(rbspi, spi_ioc, tx_buf[i]);
+ else
+ do_spi_byte(rbspi, spi_ioc, tx_buf[i]);
+ if (!rx_buf)
+ continue;
+ rx_buf[i] = rb4xx_read(rbspi, AR71XX_SPI_REG_RDS);
+ }
+ spi_finalize_current_transfer(host);
+
+ return 0;
+}
+
+static int rb4xx_spi_probe(struct platform_device *pdev)
+{
+ struct spi_controller *host;
+ struct clk *ahb_clk;
+ struct rb4xx_spi *rbspi;
+ int err;
+ void __iomem *spi_base;
+
+ spi_base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(spi_base))
+ return PTR_ERR(spi_base);
+
+ host = devm_spi_alloc_host(&pdev->dev, sizeof(*rbspi));
+ if (!host)
+ return -ENOMEM;
+
+ ahb_clk = devm_clk_get(&pdev->dev, "ahb");
+ if (IS_ERR(ahb_clk))
+ return PTR_ERR(ahb_clk);
+
+ host->dev.of_node = pdev->dev.of_node;
+ host->bus_num = 0;
+ host->num_chipselect = 3;
+ host->mode_bits = SPI_TX_DUAL;
+ host->bits_per_word_mask = SPI_BPW_MASK(8);
+ host->flags = SPI_CONTROLLER_MUST_TX;
+ host->transfer_one = rb4xx_transfer_one;
+ host->set_cs = rb4xx_set_cs;
+
+ rbspi = spi_controller_get_devdata(host);
+ rbspi->base = spi_base;
+ rbspi->clk = ahb_clk;
+ platform_set_drvdata(pdev, rbspi);
+
+ err = devm_spi_register_controller(&pdev->dev, host);
+ if (err) {
+ dev_err(&pdev->dev, "failed to register SPI host\n");
+ return err;
+ }
+
+ err = clk_prepare_enable(ahb_clk);
+ if (err)
+ return err;
+
+ /* Enable SPI */
+ rb4xx_write(rbspi, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
+
+ return 0;
+}
+
+static void rb4xx_spi_remove(struct platform_device *pdev)
+{
+ struct rb4xx_spi *rbspi = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(rbspi->clk);
+}
+
+static const struct of_device_id rb4xx_spi_dt_match[] = {
+ { .compatible = "mikrotik,rb4xx-spi" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, rb4xx_spi_dt_match);
+
+static struct platform_driver rb4xx_spi_drv = {
+ .probe = rb4xx_spi_probe,
+ .remove_new = rb4xx_spi_remove,
+ .driver = {
+ .name = "rb4xx-spi",
+ .of_match_table = of_match_ptr(rb4xx_spi_dt_match),
+ },
+};
+
+module_platform_driver(rb4xx_spi_drv);
+
+MODULE_DESCRIPTION("Mikrotik RB4xx SPI controller driver");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_AUTHOR("Bert Vermeulen <bert@biot.com>");
+MODULE_LICENSE("GPL v2");