diff options
Diffstat (limited to 'drivers/staging/iio/Documentation/sysfs-bus-iio-dds')
-rw-r--r-- | drivers/staging/iio/Documentation/sysfs-bus-iio-dds | 96 |
1 files changed, 96 insertions, 0 deletions
diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-dds b/drivers/staging/iio/Documentation/sysfs-bus-iio-dds new file mode 100644 index 0000000000..ee8c509c67 --- /dev/null +++ b/drivers/staging/iio/Documentation/sysfs-bus-iio-dds @@ -0,0 +1,96 @@ + +What: /sys/bus/iio/devices/.../out_altvoltageX_frequencyY +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Stores frequency into tuning word Y. + There will be more than one out_altvoltageX_frequencyY file, + which allows for pin controlled FSK Frequency Shift Keying + (out_altvoltageX_pincontrol_frequency_en is active) or the user + can control the desired active tuning word by writing Y to the + out_altvoltageX_frequencysymbol file. + +What: /sys/bus/iio/devices/.../out_altvoltageX_frequencyY_scale +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Scale to be applied to out_altvoltageX_frequencyY in order to + obtain the desired value in Hz. If shared across all frequency + registers Y is not present. It is also possible X is not present + if shared across all channels. + +What: /sys/bus/iio/devices/.../out_altvoltageX_frequencysymbol +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Specifies the active output frequency tuning word. The value + corresponds to the Y in out_altvoltageX_frequencyY. + To exit this mode the user can write + out_altvoltageX_pincontrol_frequency_en or + out_altvoltageX_out_enable file. + +What: /sys/bus/iio/devices/.../out_altvoltageX_phaseY +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Stores phase into Y. + There will be more than one out_altvoltageX_phaseY file, which + allows for pin controlled PSK Phase Shift Keying + (out_altvoltageX_pincontrol_phase_en is active) or the user can + control the desired phase Y which is added to the phase + accumulator output by writing Y to the phase_en file. + +What: /sys/bus/iio/devices/.../out_altvoltageX_phaseY_scale +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Scale to be applied to out_altvoltageX_phaseY in order to obtain + the desired value in rad. If shared across all phase registers + Y is not present. It is also possible X is not present if + shared across all channels. + +What: /sys/bus/iio/devices/.../out_altvoltageX_phasesymbol +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Specifies the active phase Y which is added to the phase + accumulator output. The value corresponds to the Y in + out_altvoltageX_phaseY. To exit this mode the user can write + out_altvoltageX_pincontrol_phase_en or disable file. + +What: /sys/bus/iio/devices/.../out_altvoltageX_pincontrol_en +What: /sys/bus/iio/devices/.../out_altvoltageX_pincontrol_frequency_en +What: /sys/bus/iio/devices/.../out_altvoltageX_pincontrol_phase_en +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + out_altvoltageX_pincontrol_en: Both, the active frequency and + phase is controlled by the respective phase and frequency + control inputs. In case the device in features independent + controls, then there are dedicated files + (out_altvoltageX_pincontrol_frequency_en, + out_altvoltageX_pincontrol_phase_en). + +What: /sys/bus/iio/devices/.../out_altvoltageX_out_enable +What: /sys/bus/iio/devices/.../out_altvoltageX_outY_enable +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + out_altvoltageX_outY_enable controls signal generation on + output Y of channel X. Y may be suppressed if all channels are + controlled together. + +What: /sys/bus/iio/devices/.../out_altvoltageX_outY_wavetype +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Specifies the output waveform. + (sine, triangle, ramp, square, ...) + For a list of available output waveform options read + available_output_modes. + +What: /sys/bus/iio/devices/.../out_altvoltageX_outY_wavetype_available +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Lists all available output waveform options. |