summaryrefslogtreecommitdiffstats
path: root/drivers/usb/chipidea/usbmisc_imx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/chipidea/usbmisc_imx.c')
-rw-r--r--drivers/usb/chipidea/usbmisc_imx.c1325
1 files changed, 1325 insertions, 0 deletions
diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
new file mode 100644
index 0000000000..173c78afd5
--- /dev/null
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -0,0 +1,1325 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/usb/otg.h>
+
+#include "ci_hdrc_imx.h"
+
+#define MX25_USB_PHY_CTRL_OFFSET 0x08
+#define MX25_BM_EXTERNAL_VBUS_DIVIDER BIT(23)
+
+#define MX25_EHCI_INTERFACE_SINGLE_UNI (2 << 0)
+#define MX25_EHCI_INTERFACE_DIFF_UNI (0 << 0)
+#define MX25_EHCI_INTERFACE_MASK (0xf)
+
+#define MX25_OTG_SIC_SHIFT 29
+#define MX25_OTG_SIC_MASK (0x3 << MX25_OTG_SIC_SHIFT)
+#define MX25_OTG_PM_BIT BIT(24)
+#define MX25_OTG_PP_BIT BIT(11)
+#define MX25_OTG_OCPOL_BIT BIT(3)
+
+#define MX25_H1_SIC_SHIFT 21
+#define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT)
+#define MX25_H1_PP_BIT BIT(18)
+#define MX25_H1_PM_BIT BIT(16)
+#define MX25_H1_IPPUE_UP_BIT BIT(7)
+#define MX25_H1_IPPUE_DOWN_BIT BIT(6)
+#define MX25_H1_TLL_BIT BIT(5)
+#define MX25_H1_USBTE_BIT BIT(4)
+#define MX25_H1_OCPOL_BIT BIT(2)
+
+#define MX27_H1_PM_BIT BIT(8)
+#define MX27_H2_PM_BIT BIT(16)
+#define MX27_OTG_PM_BIT BIT(24)
+
+#define MX53_USB_OTG_PHY_CTRL_0_OFFSET 0x08
+#define MX53_USB_OTG_PHY_CTRL_1_OFFSET 0x0c
+#define MX53_USB_CTRL_1_OFFSET 0x10
+#define MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_MASK (0x11 << 2)
+#define MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_ULPI BIT(2)
+#define MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_MASK (0x11 << 6)
+#define MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_ULPI BIT(6)
+#define MX53_USB_UH2_CTRL_OFFSET 0x14
+#define MX53_USB_UH3_CTRL_OFFSET 0x18
+#define MX53_USB_CLKONOFF_CTRL_OFFSET 0x24
+#define MX53_USB_CLKONOFF_CTRL_H2_INT60CKOFF BIT(21)
+#define MX53_USB_CLKONOFF_CTRL_H3_INT60CKOFF BIT(22)
+#define MX53_BM_OVER_CUR_DIS_H1 BIT(5)
+#define MX53_BM_OVER_CUR_DIS_OTG BIT(8)
+#define MX53_BM_OVER_CUR_DIS_UHx BIT(30)
+#define MX53_USB_CTRL_1_UH2_ULPI_EN BIT(26)
+#define MX53_USB_CTRL_1_UH3_ULPI_EN BIT(27)
+#define MX53_USB_UHx_CTRL_WAKE_UP_EN BIT(7)
+#define MX53_USB_UHx_CTRL_ULPI_INT_EN BIT(8)
+#define MX53_USB_PHYCTRL1_PLLDIV_MASK 0x3
+#define MX53_USB_PLL_DIV_24_MHZ 0x01
+
+#define MX6_BM_NON_BURST_SETTING BIT(1)
+#define MX6_BM_OVER_CUR_DIS BIT(7)
+#define MX6_BM_OVER_CUR_POLARITY BIT(8)
+#define MX6_BM_PWR_POLARITY BIT(9)
+#define MX6_BM_WAKEUP_ENABLE BIT(10)
+#define MX6_BM_UTMI_ON_CLOCK BIT(13)
+#define MX6_BM_ID_WAKEUP BIT(16)
+#define MX6_BM_VBUS_WAKEUP BIT(17)
+#define MX6SX_BM_DPDM_WAKEUP_EN BIT(29)
+#define MX6_BM_WAKEUP_INTR BIT(31)
+
+#define MX6_USB_HSIC_CTRL_OFFSET 0x10
+/* Send resume signal without 480Mhz PHY clock */
+#define MX6SX_BM_HSIC_AUTO_RESUME BIT(23)
+/* set before portsc.suspendM = 1 */
+#define MX6_BM_HSIC_DEV_CONN BIT(21)
+/* HSIC enable */
+#define MX6_BM_HSIC_EN BIT(12)
+/* Force HSIC module 480M clock on, even when in Host is in suspend mode */
+#define MX6_BM_HSIC_CLK_ON BIT(11)
+
+#define MX6_USB_OTG1_PHY_CTRL 0x18
+/* For imx6dql, it is host-only controller, for later imx6, it is otg's */
+#define MX6_USB_OTG2_PHY_CTRL 0x1c
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE(v) (v << 8)
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE_VBUS MX6SX_USB_VBUS_WAKEUP_SOURCE(0)
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE_AVALID MX6SX_USB_VBUS_WAKEUP_SOURCE(1)
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID MX6SX_USB_VBUS_WAKEUP_SOURCE(2)
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE_SESS_END MX6SX_USB_VBUS_WAKEUP_SOURCE(3)
+
+#define VF610_OVER_CUR_DIS BIT(7)
+
+#define MX7D_USBNC_USB_CTRL2 0x4
+#define MX7D_USB_VBUS_WAKEUP_SOURCE_MASK 0x3
+#define MX7D_USB_VBUS_WAKEUP_SOURCE(v) (v << 0)
+#define MX7D_USB_VBUS_WAKEUP_SOURCE_VBUS MX7D_USB_VBUS_WAKEUP_SOURCE(0)
+#define MX7D_USB_VBUS_WAKEUP_SOURCE_AVALID MX7D_USB_VBUS_WAKEUP_SOURCE(1)
+#define MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID MX7D_USB_VBUS_WAKEUP_SOURCE(2)
+#define MX7D_USB_VBUS_WAKEUP_SOURCE_SESS_END MX7D_USB_VBUS_WAKEUP_SOURCE(3)
+#define MX7D_USBNC_AUTO_RESUME BIT(2)
+/* The default DM/DP value is pull-down */
+#define MX7D_USBNC_USB_CTRL2_OPMODE(v) (v << 6)
+#define MX7D_USBNC_USB_CTRL2_OPMODE_NON_DRIVING MX7D_USBNC_USB_CTRL2_OPMODE(1)
+#define MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_MASK (BIT(7) | BIT(6))
+#define MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_EN BIT(8)
+#define MX7D_USBNC_USB_CTRL2_DP_OVERRIDE_VAL BIT(12)
+#define MX7D_USBNC_USB_CTRL2_DP_OVERRIDE_EN BIT(13)
+#define MX7D_USBNC_USB_CTRL2_DM_OVERRIDE_VAL BIT(14)
+#define MX7D_USBNC_USB_CTRL2_DM_OVERRIDE_EN BIT(15)
+#define MX7D_USBNC_USB_CTRL2_DP_DM_MASK (BIT(12) | BIT(13) | \
+ BIT(14) | BIT(15))
+
+#define MX7D_USB_OTG_PHY_CFG2_CHRG_CHRGSEL BIT(0)
+#define MX7D_USB_OTG_PHY_CFG2_CHRG_VDATDETENB0 BIT(1)
+#define MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0 BIT(2)
+#define MX7D_USB_OTG_PHY_CFG2_CHRG_DCDENB BIT(3)
+#define MX7D_USB_OTG_PHY_CFG2_DRVVBUS0 BIT(16)
+
+#define MX7D_USB_OTG_PHY_CFG2 0x34
+
+#define MX7D_USB_OTG_PHY_STATUS 0x3c
+#define MX7D_USB_OTG_PHY_STATUS_LINE_STATE0 BIT(0)
+#define MX7D_USB_OTG_PHY_STATUS_LINE_STATE1 BIT(1)
+#define MX7D_USB_OTG_PHY_STATUS_VBUS_VLD BIT(3)
+#define MX7D_USB_OTG_PHY_STATUS_CHRGDET BIT(29)
+
+#define MX7D_USB_OTG_PHY_CFG1 0x30
+#define TXPREEMPAMPTUNE0_BIT 28
+#define TXPREEMPAMPTUNE0_MASK (3 << 28)
+#define TXRISETUNE0_BIT 24
+#define TXRISETUNE0_MASK (3 << 24)
+#define TXVREFTUNE0_BIT 20
+#define TXVREFTUNE0_MASK (0xf << 20)
+
+#define MX6_USB_OTG_WAKEUP_BITS (MX6_BM_WAKEUP_ENABLE | MX6_BM_VBUS_WAKEUP | \
+ MX6_BM_ID_WAKEUP | MX6SX_BM_DPDM_WAKEUP_EN)
+
+struct usbmisc_ops {
+ /* It's called once when probe a usb device */
+ int (*init)(struct imx_usbmisc_data *data);
+ /* It's called once after adding a usb device */
+ int (*post)(struct imx_usbmisc_data *data);
+ /* It's called when we need to enable/disable usb wakeup */
+ int (*set_wakeup)(struct imx_usbmisc_data *data, bool enabled);
+ /* It's called before setting portsc.suspendM */
+ int (*hsic_set_connect)(struct imx_usbmisc_data *data);
+ /* It's called during suspend/resume */
+ int (*hsic_set_clk)(struct imx_usbmisc_data *data, bool enabled);
+ /* usb charger detection */
+ int (*charger_detection)(struct imx_usbmisc_data *data);
+ /* It's called when system resume from usb power lost */
+ int (*power_lost_check)(struct imx_usbmisc_data *data);
+ void (*vbus_comparator_on)(struct imx_usbmisc_data *data, bool on);
+};
+
+struct imx_usbmisc {
+ void __iomem *base;
+ spinlock_t lock;
+ const struct usbmisc_ops *ops;
+};
+
+static inline bool is_imx53_usbmisc(struct imx_usbmisc_data *data);
+
+static int usbmisc_imx25_init(struct imx_usbmisc_data *data)
+{
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ unsigned long flags;
+ u32 val = 0;
+
+ if (data->index > 1)
+ return -EINVAL;
+
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ switch (data->index) {
+ case 0:
+ val = readl(usbmisc->base);
+ val &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PP_BIT);
+ val |= (MX25_EHCI_INTERFACE_DIFF_UNI & MX25_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT;
+ val |= (MX25_OTG_PM_BIT | MX25_OTG_OCPOL_BIT);
+
+ /*
+ * If the polarity is not configured assume active high for
+ * historical reasons.
+ */
+ if (data->oc_pol_configured && data->oc_pol_active_low)
+ val &= ~MX25_OTG_OCPOL_BIT;
+
+ writel(val, usbmisc->base);
+ break;
+ case 1:
+ val = readl(usbmisc->base);
+ val &= ~(MX25_H1_SIC_MASK | MX25_H1_PP_BIT | MX25_H1_IPPUE_UP_BIT);
+ val |= (MX25_EHCI_INTERFACE_SINGLE_UNI & MX25_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT;
+ val |= (MX25_H1_PM_BIT | MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT |
+ MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT);
+
+ /*
+ * If the polarity is not configured assume active high for
+ * historical reasons.
+ */
+ if (data->oc_pol_configured && data->oc_pol_active_low)
+ val &= ~MX25_H1_OCPOL_BIT;
+
+ writel(val, usbmisc->base);
+
+ break;
+ }
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+ return 0;
+}
+
+static int usbmisc_imx25_post(struct imx_usbmisc_data *data)
+{
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ void __iomem *reg;
+ unsigned long flags;
+ u32 val;
+
+ if (data->index > 2)
+ return -EINVAL;
+
+ if (data->index)
+ return 0;
+
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ reg = usbmisc->base + MX25_USB_PHY_CTRL_OFFSET;
+ val = readl(reg);
+
+ if (data->evdo)
+ val |= MX25_BM_EXTERNAL_VBUS_DIVIDER;
+ else
+ val &= ~MX25_BM_EXTERNAL_VBUS_DIVIDER;
+
+ writel(val, reg);
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+ usleep_range(5000, 10000); /* needed to stabilize voltage */
+
+ return 0;
+}
+
+static int usbmisc_imx27_init(struct imx_usbmisc_data *data)
+{
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ unsigned long flags;
+ u32 val;
+
+ switch (data->index) {
+ case 0:
+ val = MX27_OTG_PM_BIT;
+ break;
+ case 1:
+ val = MX27_H1_PM_BIT;
+ break;
+ case 2:
+ val = MX27_H2_PM_BIT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ if (data->disable_oc)
+ val = readl(usbmisc->base) | val;
+ else
+ val = readl(usbmisc->base) & ~val;
+ writel(val, usbmisc->base);
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+ return 0;
+}
+
+static int usbmisc_imx53_init(struct imx_usbmisc_data *data)
+{
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ void __iomem *reg = NULL;
+ unsigned long flags;
+ u32 val = 0;
+
+ if (data->index > 3)
+ return -EINVAL;
+
+ /* Select a 24 MHz reference clock for the PHY */
+ val = readl(usbmisc->base + MX53_USB_OTG_PHY_CTRL_1_OFFSET);
+ val &= ~MX53_USB_PHYCTRL1_PLLDIV_MASK;
+ val |= MX53_USB_PLL_DIV_24_MHZ;
+ writel(val, usbmisc->base + MX53_USB_OTG_PHY_CTRL_1_OFFSET);
+
+ spin_lock_irqsave(&usbmisc->lock, flags);
+
+ switch (data->index) {
+ case 0:
+ if (data->disable_oc) {
+ reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_0_OFFSET;
+ val = readl(reg) | MX53_BM_OVER_CUR_DIS_OTG;
+ writel(val, reg);
+ }
+ break;
+ case 1:
+ if (data->disable_oc) {
+ reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_0_OFFSET;
+ val = readl(reg) | MX53_BM_OVER_CUR_DIS_H1;
+ writel(val, reg);
+ }
+ break;
+ case 2:
+ if (data->ulpi) {
+ /* set USBH2 into ULPI-mode. */
+ reg = usbmisc->base + MX53_USB_CTRL_1_OFFSET;
+ val = readl(reg) | MX53_USB_CTRL_1_UH2_ULPI_EN;
+ /* select ULPI clock */
+ val &= ~MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_MASK;
+ val |= MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_ULPI;
+ writel(val, reg);
+ /* Set interrupt wake up enable */
+ reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET;
+ val = readl(reg) | MX53_USB_UHx_CTRL_WAKE_UP_EN
+ | MX53_USB_UHx_CTRL_ULPI_INT_EN;
+ writel(val, reg);
+ if (is_imx53_usbmisc(data)) {
+ /* Disable internal 60Mhz clock */
+ reg = usbmisc->base +
+ MX53_USB_CLKONOFF_CTRL_OFFSET;
+ val = readl(reg) |
+ MX53_USB_CLKONOFF_CTRL_H2_INT60CKOFF;
+ writel(val, reg);
+ }
+
+ }
+ if (data->disable_oc) {
+ reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET;
+ val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx;
+ writel(val, reg);
+ }
+ break;
+ case 3:
+ if (data->ulpi) {
+ /* set USBH3 into ULPI-mode. */
+ reg = usbmisc->base + MX53_USB_CTRL_1_OFFSET;
+ val = readl(reg) | MX53_USB_CTRL_1_UH3_ULPI_EN;
+ /* select ULPI clock */
+ val &= ~MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_MASK;
+ val |= MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_ULPI;
+ writel(val, reg);
+ /* Set interrupt wake up enable */
+ reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET;
+ val = readl(reg) | MX53_USB_UHx_CTRL_WAKE_UP_EN
+ | MX53_USB_UHx_CTRL_ULPI_INT_EN;
+ writel(val, reg);
+
+ if (is_imx53_usbmisc(data)) {
+ /* Disable internal 60Mhz clock */
+ reg = usbmisc->base +
+ MX53_USB_CLKONOFF_CTRL_OFFSET;
+ val = readl(reg) |
+ MX53_USB_CLKONOFF_CTRL_H3_INT60CKOFF;
+ writel(val, reg);
+ }
+ }
+ if (data->disable_oc) {
+ reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET;
+ val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx;
+ writel(val, reg);
+ }
+ break;
+ }
+
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+ return 0;
+}
+
+static u32 usbmisc_wakeup_setting(struct imx_usbmisc_data *data)
+{
+ u32 wakeup_setting = MX6_USB_OTG_WAKEUP_BITS;
+
+ if (data->ext_id || data->available_role != USB_DR_MODE_OTG)
+ wakeup_setting &= ~MX6_BM_ID_WAKEUP;
+
+ if (data->ext_vbus || data->available_role == USB_DR_MODE_HOST)
+ wakeup_setting &= ~MX6_BM_VBUS_WAKEUP;
+
+ return wakeup_setting;
+}
+
+static int usbmisc_imx6q_set_wakeup
+ (struct imx_usbmisc_data *data, bool enabled)
+{
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ unsigned long flags;
+ u32 val;
+ int ret = 0;
+
+ if (data->index > 3)
+ return -EINVAL;
+
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ val = readl(usbmisc->base + data->index * 4);
+ if (enabled) {
+ val &= ~MX6_USB_OTG_WAKEUP_BITS;
+ val |= usbmisc_wakeup_setting(data);
+ } else {
+ if (val & MX6_BM_WAKEUP_INTR)
+ pr_debug("wakeup int at ci_hdrc.%d\n", data->index);
+ val &= ~MX6_USB_OTG_WAKEUP_BITS;
+ }
+ writel(val, usbmisc->base + data->index * 4);
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+ return ret;
+}
+
+static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
+{
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ unsigned long flags;
+ u32 reg;
+
+ if (data->index > 3)
+ return -EINVAL;
+
+ spin_lock_irqsave(&usbmisc->lock, flags);
+
+ reg = readl(usbmisc->base + data->index * 4);
+ if (data->disable_oc) {
+ reg |= MX6_BM_OVER_CUR_DIS;
+ } else {
+ reg &= ~MX6_BM_OVER_CUR_DIS;
+
+ /*
+ * If the polarity is not configured keep it as setup by the
+ * bootloader.
+ */
+ if (data->oc_pol_configured && data->oc_pol_active_low)
+ reg |= MX6_BM_OVER_CUR_POLARITY;
+ else if (data->oc_pol_configured)
+ reg &= ~MX6_BM_OVER_CUR_POLARITY;
+ }
+ /* If the polarity is not set keep it as setup by the bootlader */
+ if (data->pwr_pol == 1)
+ reg |= MX6_BM_PWR_POLARITY;
+ writel(reg, usbmisc->base + data->index * 4);
+
+ /* SoC non-burst setting */
+ reg = readl(usbmisc->base + data->index * 4);
+ writel(reg | MX6_BM_NON_BURST_SETTING,
+ usbmisc->base + data->index * 4);
+
+ /* For HSIC controller */
+ if (data->hsic) {
+ reg = readl(usbmisc->base + data->index * 4);
+ writel(reg | MX6_BM_UTMI_ON_CLOCK,
+ usbmisc->base + data->index * 4);
+ reg = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET
+ + (data->index - 2) * 4);
+ reg |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON;
+ writel(reg, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET
+ + (data->index - 2) * 4);
+ }
+
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+ usbmisc_imx6q_set_wakeup(data, false);
+
+ return 0;
+}
+
+static int usbmisc_imx6_hsic_get_reg_offset(struct imx_usbmisc_data *data)
+{
+ int offset, ret = 0;
+
+ if (data->index == 2 || data->index == 3) {
+ offset = (data->index - 2) * 4;
+ } else if (data->index == 0) {
+ /*
+ * For SoCs like i.MX7D and later, each USB controller has
+ * its own non-core register region. For SoCs before i.MX7D,
+ * the first two USB controllers are non-HSIC controllers.
+ */
+ offset = 0;
+ } else {
+ dev_err(data->dev, "index is error for usbmisc\n");
+ ret = -EINVAL;
+ }
+
+ return ret ? ret : offset;
+}
+
+static int usbmisc_imx6_hsic_set_connect(struct imx_usbmisc_data *data)
+{
+ unsigned long flags;
+ u32 val;
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ int offset;
+
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ offset = usbmisc_imx6_hsic_get_reg_offset(data);
+ if (offset < 0) {
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+ return offset;
+ }
+
+ val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset);
+ if (!(val & MX6_BM_HSIC_DEV_CONN))
+ writel(val | MX6_BM_HSIC_DEV_CONN,
+ usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset);
+
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+ return 0;
+}
+
+static int usbmisc_imx6_hsic_set_clk(struct imx_usbmisc_data *data, bool on)
+{
+ unsigned long flags;
+ u32 val;
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ int offset;
+
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ offset = usbmisc_imx6_hsic_get_reg_offset(data);
+ if (offset < 0) {
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+ return offset;
+ }
+
+ val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset);
+ val |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON;
+ if (on)
+ val |= MX6_BM_HSIC_CLK_ON;
+ else
+ val &= ~MX6_BM_HSIC_CLK_ON;
+
+ writel(val, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset);
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+ return 0;
+}
+
+
+static int usbmisc_imx6sx_init(struct imx_usbmisc_data *data)
+{
+ void __iomem *reg = NULL;
+ unsigned long flags;
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ u32 val;
+
+ usbmisc_imx6q_init(data);
+
+ if (data->index == 0 || data->index == 1) {
+ reg = usbmisc->base + MX6_USB_OTG1_PHY_CTRL + data->index * 4;
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ /* Set vbus wakeup source as bvalid */
+ val = readl(reg);
+ writel(val | MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID, reg);
+ /*
+ * Disable dp/dm wakeup in device mode when vbus is
+ * not there.
+ */
+ val = readl(usbmisc->base + data->index * 4);
+ writel(val & ~MX6SX_BM_DPDM_WAKEUP_EN,
+ usbmisc->base + data->index * 4);
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+ }
+
+ /* For HSIC controller */
+ if (data->hsic) {
+ val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET);
+ val |= MX6SX_BM_HSIC_AUTO_RESUME;
+ writel(val, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET);
+ }
+
+ return 0;
+}
+
+static int usbmisc_vf610_init(struct imx_usbmisc_data *data)
+{
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ u32 reg;
+
+ /*
+ * Vybrid only has one misc register set, but in two different
+ * areas. These is reflected in two instances of this driver.
+ */
+ if (data->index >= 1)
+ return -EINVAL;
+
+ if (data->disable_oc) {
+ reg = readl(usbmisc->base);
+ writel(reg | VF610_OVER_CUR_DIS, usbmisc->base);
+ }
+
+ return 0;
+}
+
+static int usbmisc_imx7d_set_wakeup
+ (struct imx_usbmisc_data *data, bool enabled)
+{
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ unsigned long flags;
+ u32 val;
+
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ val = readl(usbmisc->base);
+ if (enabled) {
+ val &= ~MX6_USB_OTG_WAKEUP_BITS;
+ val |= usbmisc_wakeup_setting(data);
+ writel(val, usbmisc->base);
+ } else {
+ if (val & MX6_BM_WAKEUP_INTR)
+ dev_dbg(data->dev, "wakeup int\n");
+ writel(val & ~MX6_USB_OTG_WAKEUP_BITS, usbmisc->base);
+ }
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+ return 0;
+}
+
+static int usbmisc_imx7d_init(struct imx_usbmisc_data *data)
+{
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ unsigned long flags;
+ u32 reg;
+
+ if (data->index >= 1)
+ return -EINVAL;
+
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ reg = readl(usbmisc->base);
+ if (data->disable_oc) {
+ reg |= MX6_BM_OVER_CUR_DIS;
+ } else {
+ reg &= ~MX6_BM_OVER_CUR_DIS;
+
+ /*
+ * If the polarity is not configured keep it as setup by the
+ * bootloader.
+ */
+ if (data->oc_pol_configured && data->oc_pol_active_low)
+ reg |= MX6_BM_OVER_CUR_POLARITY;
+ else if (data->oc_pol_configured)
+ reg &= ~MX6_BM_OVER_CUR_POLARITY;
+ }
+ /* If the polarity is not set keep it as setup by the bootlader */
+ if (data->pwr_pol == 1)
+ reg |= MX6_BM_PWR_POLARITY;
+ writel(reg, usbmisc->base);
+
+ /* SoC non-burst setting */
+ reg = readl(usbmisc->base);
+ writel(reg | MX6_BM_NON_BURST_SETTING, usbmisc->base);
+
+ if (!data->hsic) {
+ reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ reg &= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK;
+ writel(reg | MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID
+ | MX7D_USBNC_AUTO_RESUME,
+ usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ /* PHY tuning for signal quality */
+ reg = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG1);
+ if (data->emp_curr_control >= 0 &&
+ data->emp_curr_control <=
+ (TXPREEMPAMPTUNE0_MASK >> TXPREEMPAMPTUNE0_BIT)) {
+ reg &= ~TXPREEMPAMPTUNE0_MASK;
+ reg |= (data->emp_curr_control << TXPREEMPAMPTUNE0_BIT);
+ }
+
+ if (data->dc_vol_level_adjust >= 0 &&
+ data->dc_vol_level_adjust <=
+ (TXVREFTUNE0_MASK >> TXVREFTUNE0_BIT)) {
+ reg &= ~TXVREFTUNE0_MASK;
+ reg |= (data->dc_vol_level_adjust << TXVREFTUNE0_BIT);
+ }
+
+ if (data->rise_fall_time_adjust >= 0 &&
+ data->rise_fall_time_adjust <=
+ (TXRISETUNE0_MASK >> TXRISETUNE0_BIT)) {
+ reg &= ~TXRISETUNE0_MASK;
+ reg |= (data->rise_fall_time_adjust << TXRISETUNE0_BIT);
+ }
+
+ writel(reg, usbmisc->base + MX7D_USB_OTG_PHY_CFG1);
+ }
+
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+ usbmisc_imx7d_set_wakeup(data, false);
+
+ return 0;
+}
+
+static int imx7d_charger_secondary_detection(struct imx_usbmisc_data *data)
+{
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ struct usb_phy *usb_phy = data->usb_phy;
+ int val;
+ unsigned long flags;
+
+ /* Clear VDATSRCENB0 to disable VDP_SRC and IDM_SNK required by BC 1.2 spec */
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+ val &= ~MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0;
+ writel(val, usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+ /* TVDMSRC_DIS */
+ msleep(20);
+
+ /* VDM_SRC is connected to D- and IDP_SINK is connected to D+ */
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+ writel(val | MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0 |
+ MX7D_USB_OTG_PHY_CFG2_CHRG_VDATDETENB0 |
+ MX7D_USB_OTG_PHY_CFG2_CHRG_CHRGSEL,
+ usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+ /* TVDMSRC_ON */
+ msleep(40);
+
+ /*
+ * Per BC 1.2, check voltage of D+:
+ * DCP: if greater than VDAT_REF;
+ * CDP: if less than VDAT_REF.
+ */
+ val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS);
+ if (val & MX7D_USB_OTG_PHY_STATUS_CHRGDET) {
+ dev_dbg(data->dev, "It is a dedicate charging port\n");
+ usb_phy->chg_type = DCP_TYPE;
+ } else {
+ dev_dbg(data->dev, "It is a charging downstream port\n");
+ usb_phy->chg_type = CDP_TYPE;
+ }
+
+ return 0;
+}
+
+static void imx7_disable_charger_detector(struct imx_usbmisc_data *data)
+{
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ unsigned long flags;
+ u32 val;
+
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+ val &= ~(MX7D_USB_OTG_PHY_CFG2_CHRG_DCDENB |
+ MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0 |
+ MX7D_USB_OTG_PHY_CFG2_CHRG_VDATDETENB0 |
+ MX7D_USB_OTG_PHY_CFG2_CHRG_CHRGSEL);
+ writel(val, usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+
+ /* Set OPMODE to be 2'b00 and disable its override */
+ val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ val &= ~MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_MASK;
+ writel(val, usbmisc->base + MX7D_USBNC_USB_CTRL2);
+
+ val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ writel(val & ~MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_EN,
+ usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+}
+
+static int imx7d_charger_data_contact_detect(struct imx_usbmisc_data *data)
+{
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ unsigned long flags;
+ u32 val;
+ int i, data_pin_contact_count = 0;
+
+ /* Enable Data Contact Detect (DCD) per the USB BC 1.2 */
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+ writel(val | MX7D_USB_OTG_PHY_CFG2_CHRG_DCDENB,
+ usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+ for (i = 0; i < 100; i = i + 1) {
+ val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS);
+ if (!(val & MX7D_USB_OTG_PHY_STATUS_LINE_STATE0)) {
+ if (data_pin_contact_count++ > 5)
+ /* Data pin makes contact */
+ break;
+ usleep_range(5000, 10000);
+ } else {
+ data_pin_contact_count = 0;
+ usleep_range(5000, 6000);
+ }
+ }
+
+ /* Disable DCD after finished data contact check */
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+ writel(val & ~MX7D_USB_OTG_PHY_CFG2_CHRG_DCDENB,
+ usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+ if (i == 100) {
+ dev_err(data->dev,
+ "VBUS is coming from a dedicated power supply.\n");
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
+static int imx7d_charger_primary_detection(struct imx_usbmisc_data *data)
+{
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ struct usb_phy *usb_phy = data->usb_phy;
+ unsigned long flags;
+ u32 val;
+
+ /* VDP_SRC is connected to D+ and IDM_SINK is connected to D- */
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+ val &= ~MX7D_USB_OTG_PHY_CFG2_CHRG_CHRGSEL;
+ writel(val | MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0 |
+ MX7D_USB_OTG_PHY_CFG2_CHRG_VDATDETENB0,
+ usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+ /* TVDPSRC_ON */
+ msleep(40);
+
+ /* Check if D- is less than VDAT_REF to determine an SDP per BC 1.2 */
+ val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS);
+ if (!(val & MX7D_USB_OTG_PHY_STATUS_CHRGDET)) {
+ dev_dbg(data->dev, "It is a standard downstream port\n");
+ usb_phy->chg_type = SDP_TYPE;
+ }
+
+ return 0;
+}
+
+/*
+ * Whole charger detection process:
+ * 1. OPMODE override to be non-driving
+ * 2. Data contact check
+ * 3. Primary detection
+ * 4. Secondary detection
+ * 5. Disable charger detection
+ */
+static int imx7d_charger_detection(struct imx_usbmisc_data *data)
+{
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ struct usb_phy *usb_phy = data->usb_phy;
+ unsigned long flags;
+ u32 val;
+ int ret;
+
+ /* Check if vbus is valid */
+ val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS);
+ if (!(val & MX7D_USB_OTG_PHY_STATUS_VBUS_VLD)) {
+ dev_err(data->dev, "vbus is error\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Keep OPMODE to be non-driving mode during the whole
+ * charger detection process.
+ */
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ val &= ~MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_MASK;
+ val |= MX7D_USBNC_USB_CTRL2_OPMODE_NON_DRIVING;
+ writel(val, usbmisc->base + MX7D_USBNC_USB_CTRL2);
+
+ val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ writel(val | MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_EN,
+ usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+ ret = imx7d_charger_data_contact_detect(data);
+ if (ret)
+ return ret;
+
+ ret = imx7d_charger_primary_detection(data);
+ if (!ret && usb_phy->chg_type != SDP_TYPE)
+ ret = imx7d_charger_secondary_detection(data);
+
+ imx7_disable_charger_detector(data);
+
+ return ret;
+}
+
+static void usbmisc_imx7d_vbus_comparator_on(struct imx_usbmisc_data *data,
+ bool on)
+{
+ unsigned long flags;
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ u32 val;
+
+ if (data->hsic)
+ return;
+
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ /*
+ * Disable VBUS valid comparator when in suspend mode,
+ * when OTG is disabled and DRVVBUS0 is asserted case
+ * the Bandgap circuitry and VBUS Valid comparator are
+ * still powered, even in Suspend or Sleep mode.
+ */
+ val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+ if (on)
+ val |= MX7D_USB_OTG_PHY_CFG2_DRVVBUS0;
+ else
+ val &= ~MX7D_USB_OTG_PHY_CFG2_DRVVBUS0;
+
+ writel(val, usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+}
+
+static int usbmisc_imx7ulp_init(struct imx_usbmisc_data *data)
+{
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ unsigned long flags;
+ u32 reg;
+
+ if (data->index >= 1)
+ return -EINVAL;
+
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ reg = readl(usbmisc->base);
+ if (data->disable_oc) {
+ reg |= MX6_BM_OVER_CUR_DIS;
+ } else {
+ reg &= ~MX6_BM_OVER_CUR_DIS;
+
+ /*
+ * If the polarity is not configured keep it as setup by the
+ * bootloader.
+ */
+ if (data->oc_pol_configured && data->oc_pol_active_low)
+ reg |= MX6_BM_OVER_CUR_POLARITY;
+ else if (data->oc_pol_configured)
+ reg &= ~MX6_BM_OVER_CUR_POLARITY;
+ }
+ /* If the polarity is not set keep it as setup by the bootlader */
+ if (data->pwr_pol == 1)
+ reg |= MX6_BM_PWR_POLARITY;
+
+ writel(reg, usbmisc->base);
+
+ /* SoC non-burst setting */
+ reg = readl(usbmisc->base);
+ writel(reg | MX6_BM_NON_BURST_SETTING, usbmisc->base);
+
+ if (data->hsic) {
+ reg = readl(usbmisc->base);
+ writel(reg | MX6_BM_UTMI_ON_CLOCK, usbmisc->base);
+
+ reg = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET);
+ reg |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON;
+ writel(reg, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET);
+
+ /*
+ * For non-HSIC controller, the autoresume is enabled
+ * at MXS PHY driver (usbphy_ctrl bit18).
+ */
+ reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ writel(reg | MX7D_USBNC_AUTO_RESUME,
+ usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ } else {
+ reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ reg &= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK;
+ writel(reg | MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID,
+ usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ }
+
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+ usbmisc_imx7d_set_wakeup(data, false);
+
+ return 0;
+}
+
+static int usbmisc_imx7d_power_lost_check(struct imx_usbmisc_data *data)
+{
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ unsigned long flags;
+ u32 val;
+
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ val = readl(usbmisc->base);
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+ /*
+ * Here use a power on reset value to judge
+ * if the controller experienced a power lost
+ */
+ if (val == 0x30001000)
+ return 1;
+ else
+ return 0;
+}
+
+static int usbmisc_imx6sx_power_lost_check(struct imx_usbmisc_data *data)
+{
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ unsigned long flags;
+ u32 val;
+
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ val = readl(usbmisc->base + data->index * 4);
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+ /*
+ * Here use a power on reset value to judge
+ * if the controller experienced a power lost
+ */
+ if (val == 0x30001000)
+ return 1;
+ else
+ return 0;
+}
+
+static const struct usbmisc_ops imx25_usbmisc_ops = {
+ .init = usbmisc_imx25_init,
+ .post = usbmisc_imx25_post,
+};
+
+static const struct usbmisc_ops imx27_usbmisc_ops = {
+ .init = usbmisc_imx27_init,
+};
+
+static const struct usbmisc_ops imx51_usbmisc_ops = {
+ .init = usbmisc_imx53_init,
+};
+
+static const struct usbmisc_ops imx53_usbmisc_ops = {
+ .init = usbmisc_imx53_init,
+};
+
+static const struct usbmisc_ops imx6q_usbmisc_ops = {
+ .set_wakeup = usbmisc_imx6q_set_wakeup,
+ .init = usbmisc_imx6q_init,
+ .hsic_set_connect = usbmisc_imx6_hsic_set_connect,
+ .hsic_set_clk = usbmisc_imx6_hsic_set_clk,
+};
+
+static const struct usbmisc_ops vf610_usbmisc_ops = {
+ .init = usbmisc_vf610_init,
+};
+
+static const struct usbmisc_ops imx6sx_usbmisc_ops = {
+ .set_wakeup = usbmisc_imx6q_set_wakeup,
+ .init = usbmisc_imx6sx_init,
+ .hsic_set_connect = usbmisc_imx6_hsic_set_connect,
+ .hsic_set_clk = usbmisc_imx6_hsic_set_clk,
+ .power_lost_check = usbmisc_imx6sx_power_lost_check,
+};
+
+static const struct usbmisc_ops imx7d_usbmisc_ops = {
+ .init = usbmisc_imx7d_init,
+ .set_wakeup = usbmisc_imx7d_set_wakeup,
+ .charger_detection = imx7d_charger_detection,
+ .power_lost_check = usbmisc_imx7d_power_lost_check,
+ .vbus_comparator_on = usbmisc_imx7d_vbus_comparator_on,
+};
+
+static const struct usbmisc_ops imx7ulp_usbmisc_ops = {
+ .init = usbmisc_imx7ulp_init,
+ .set_wakeup = usbmisc_imx7d_set_wakeup,
+ .hsic_set_connect = usbmisc_imx6_hsic_set_connect,
+ .hsic_set_clk = usbmisc_imx6_hsic_set_clk,
+ .power_lost_check = usbmisc_imx7d_power_lost_check,
+};
+
+static inline bool is_imx53_usbmisc(struct imx_usbmisc_data *data)
+{
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+
+ return usbmisc->ops == &imx53_usbmisc_ops;
+}
+
+int imx_usbmisc_init(struct imx_usbmisc_data *data)
+{
+ struct imx_usbmisc *usbmisc;
+
+ if (!data)
+ return 0;
+
+ usbmisc = dev_get_drvdata(data->dev);
+ if (!usbmisc->ops->init)
+ return 0;
+ return usbmisc->ops->init(data);
+}
+EXPORT_SYMBOL_GPL(imx_usbmisc_init);
+
+int imx_usbmisc_init_post(struct imx_usbmisc_data *data)
+{
+ struct imx_usbmisc *usbmisc;
+ int ret = 0;
+
+ if (!data)
+ return 0;
+
+ usbmisc = dev_get_drvdata(data->dev);
+ if (usbmisc->ops->post)
+ ret = usbmisc->ops->post(data);
+ if (ret) {
+ dev_err(data->dev, "post init failed, ret=%d\n", ret);
+ return ret;
+ }
+
+ if (usbmisc->ops->set_wakeup)
+ ret = usbmisc->ops->set_wakeup(data, false);
+ if (ret) {
+ dev_err(data->dev, "set_wakeup failed, ret=%d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(imx_usbmisc_init_post);
+
+int imx_usbmisc_hsic_set_connect(struct imx_usbmisc_data *data)
+{
+ struct imx_usbmisc *usbmisc;
+
+ if (!data)
+ return 0;
+
+ usbmisc = dev_get_drvdata(data->dev);
+ if (!usbmisc->ops->hsic_set_connect || !data->hsic)
+ return 0;
+ return usbmisc->ops->hsic_set_connect(data);
+}
+EXPORT_SYMBOL_GPL(imx_usbmisc_hsic_set_connect);
+
+int imx_usbmisc_charger_detection(struct imx_usbmisc_data *data, bool connect)
+{
+ struct imx_usbmisc *usbmisc;
+ struct usb_phy *usb_phy;
+ int ret = 0;
+
+ if (!data)
+ return -EINVAL;
+
+ usbmisc = dev_get_drvdata(data->dev);
+ usb_phy = data->usb_phy;
+ if (!usbmisc->ops->charger_detection)
+ return -ENOTSUPP;
+
+ if (connect) {
+ ret = usbmisc->ops->charger_detection(data);
+ if (ret) {
+ dev_err(data->dev,
+ "Error occurs during detection: %d\n",
+ ret);
+ usb_phy->chg_state = USB_CHARGER_ABSENT;
+ } else {
+ usb_phy->chg_state = USB_CHARGER_PRESENT;
+ }
+ } else {
+ usb_phy->chg_state = USB_CHARGER_ABSENT;
+ usb_phy->chg_type = UNKNOWN_TYPE;
+ }
+ return ret;
+}
+EXPORT_SYMBOL_GPL(imx_usbmisc_charger_detection);
+
+int imx_usbmisc_suspend(struct imx_usbmisc_data *data, bool wakeup)
+{
+ struct imx_usbmisc *usbmisc;
+ int ret = 0;
+
+ if (!data)
+ return 0;
+
+ usbmisc = dev_get_drvdata(data->dev);
+
+ if (usbmisc->ops->vbus_comparator_on)
+ usbmisc->ops->vbus_comparator_on(data, false);
+
+ if (wakeup && usbmisc->ops->set_wakeup)
+ ret = usbmisc->ops->set_wakeup(data, true);
+ if (ret) {
+ dev_err(data->dev, "set_wakeup failed, ret=%d\n", ret);
+ return ret;
+ }
+
+ if (usbmisc->ops->hsic_set_clk && data->hsic)
+ ret = usbmisc->ops->hsic_set_clk(data, false);
+ if (ret) {
+ dev_err(data->dev, "set_wakeup failed, ret=%d\n", ret);
+ return ret;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(imx_usbmisc_suspend);
+
+int imx_usbmisc_resume(struct imx_usbmisc_data *data, bool wakeup)
+{
+ struct imx_usbmisc *usbmisc;
+ int ret = 0;
+
+ if (!data)
+ return 0;
+
+ usbmisc = dev_get_drvdata(data->dev);
+
+ if (usbmisc->ops->power_lost_check)
+ ret = usbmisc->ops->power_lost_check(data);
+ if (ret > 0) {
+ /* re-init if resume from power lost */
+ ret = imx_usbmisc_init(data);
+ if (ret) {
+ dev_err(data->dev, "re-init failed, ret=%d\n", ret);
+ return ret;
+ }
+ }
+
+ if (wakeup && usbmisc->ops->set_wakeup)
+ ret = usbmisc->ops->set_wakeup(data, false);
+ if (ret) {
+ dev_err(data->dev, "set_wakeup failed, ret=%d\n", ret);
+ return ret;
+ }
+
+ if (usbmisc->ops->hsic_set_clk && data->hsic)
+ ret = usbmisc->ops->hsic_set_clk(data, true);
+ if (ret) {
+ dev_err(data->dev, "set_wakeup failed, ret=%d\n", ret);
+ goto hsic_set_clk_fail;
+ }
+
+ if (usbmisc->ops->vbus_comparator_on)
+ usbmisc->ops->vbus_comparator_on(data, true);
+
+ return 0;
+
+hsic_set_clk_fail:
+ if (wakeup && usbmisc->ops->set_wakeup)
+ usbmisc->ops->set_wakeup(data, true);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(imx_usbmisc_resume);
+
+static const struct of_device_id usbmisc_imx_dt_ids[] = {
+ {
+ .compatible = "fsl,imx25-usbmisc",
+ .data = &imx25_usbmisc_ops,
+ },
+ {
+ .compatible = "fsl,imx35-usbmisc",
+ .data = &imx25_usbmisc_ops,
+ },
+ {
+ .compatible = "fsl,imx27-usbmisc",
+ .data = &imx27_usbmisc_ops,
+ },
+ {
+ .compatible = "fsl,imx51-usbmisc",
+ .data = &imx51_usbmisc_ops,
+ },
+ {
+ .compatible = "fsl,imx53-usbmisc",
+ .data = &imx53_usbmisc_ops,
+ },
+ {
+ .compatible = "fsl,imx6q-usbmisc",
+ .data = &imx6q_usbmisc_ops,
+ },
+ {
+ .compatible = "fsl,vf610-usbmisc",
+ .data = &vf610_usbmisc_ops,
+ },
+ {
+ .compatible = "fsl,imx6sx-usbmisc",
+ .data = &imx6sx_usbmisc_ops,
+ },
+ {
+ .compatible = "fsl,imx6ul-usbmisc",
+ .data = &imx6sx_usbmisc_ops,
+ },
+ {
+ .compatible = "fsl,imx7d-usbmisc",
+ .data = &imx7d_usbmisc_ops,
+ },
+ {
+ .compatible = "fsl,imx7ulp-usbmisc",
+ .data = &imx7ulp_usbmisc_ops,
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, usbmisc_imx_dt_ids);
+
+static int usbmisc_imx_probe(struct platform_device *pdev)
+{
+ struct imx_usbmisc *data;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ spin_lock_init(&data->lock);
+
+ data->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(data->base))
+ return PTR_ERR(data->base);
+
+ data->ops = of_device_get_match_data(&pdev->dev);
+ platform_set_drvdata(pdev, data);
+
+ return 0;
+}
+
+static struct platform_driver usbmisc_imx_driver = {
+ .probe = usbmisc_imx_probe,
+ .driver = {
+ .name = "usbmisc_imx",
+ .of_match_table = usbmisc_imx_dt_ids,
+ },
+};
+
+module_platform_driver(usbmisc_imx_driver);
+
+MODULE_ALIAS("platform:usbmisc-imx");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("driver for imx usb non-core registers");
+MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>");