diff options
Diffstat (limited to 'drivers/usb/musb/Kconfig')
| -rw-r--r-- | drivers/usb/musb/Kconfig | 166 |
1 files changed, 166 insertions, 0 deletions
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig new file mode 100644 index 0000000000..9a8cf3de06 --- /dev/null +++ b/drivers/usb/musb/Kconfig @@ -0,0 +1,166 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# USB Dual Role (OTG-ready) Controller Drivers +# for silicon based on Mentor Graphics INVENTRA designs +# + +# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller +config USB_MUSB_HDRC + tristate 'Inventra Highspeed Dual Role Controller' + depends on (USB || USB_GADGET) + depends on HAS_IOMEM + help + Say Y here if your system has a dual role high speed USB + controller based on the Mentor Graphics silicon IP. Then + configure options to match your silicon and the board + it's being used with, including the USB peripheral role, + or the USB host role, or both. + + Texas Instruments families using this IP include DaVinci + (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010. + + Allwinner SoCs using this IP include A10, A13, A20, ... + + If you do not know what this is, please say N. + + To compile this driver as a module, choose M here; the + module will be called "musb-hdrc". + +if USB_MUSB_HDRC + +choice + bool "MUSB Mode Selection" + default USB_MUSB_DUAL_ROLE if (USB && USB_GADGET) + default USB_MUSB_HOST if (USB && !USB_GADGET) + default USB_MUSB_GADGET if (!USB && USB_GADGET) + +config USB_MUSB_HOST + bool "Host only mode" + depends on USB=y || USB=USB_MUSB_HDRC + help + Select this when you want to use MUSB in host mode only, + thereby the gadget feature will be regressed. + +config USB_MUSB_GADGET + bool "Gadget only mode" + depends on USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC + depends on HAS_DMA + help + Select this when you want to use MUSB in gadget mode only, + thereby the host feature will be regressed. + +config USB_MUSB_DUAL_ROLE + bool "Dual Role mode" + depends on ((USB=y || USB=USB_MUSB_HDRC) && (USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC)) + depends on HAS_DMA + help + This is the default mode of working of MUSB controller where + both host and gadget features are enabled. + +endchoice + +comment "Platform Glue Layer" + +config USB_MUSB_SUNXI + tristate "Allwinner (sunxi)" + depends on ARCH_SUNXI + depends on NOP_USB_XCEIV + depends on PHY_SUN4I_USB + depends on EXTCON + select GENERIC_PHY + select SUNXI_SRAM + +config USB_MUSB_DA8XX + tristate "DA8xx/OMAP-L1x" + depends on ARCH_DAVINCI_DA8XX + depends on NOP_USB_XCEIV + select PHY_DA8XX_USB + +config USB_MUSB_TUSB6010 + tristate "TUSB6010" + depends on HAS_IOMEM + depends on ARCH_OMAP2PLUS || COMPILE_TEST + depends on NOP_USB_XCEIV!=m || USB_MUSB_HDRC=m + +config USB_MUSB_OMAP2PLUS + tristate "OMAP2430 and onwards" + depends on ARCH_OMAP2PLUS && USB + depends on OMAP_CONTROL_PHY || !OMAP_CONTROL_PHY + select GENERIC_PHY + +config USB_MUSB_DSPS + tristate "TI DSPS platforms" + depends on ARCH_OMAP2PLUS || COMPILE_TEST + depends on OF_IRQ + +config USB_MUSB_UX500 + tristate "Ux500 platforms" + depends on ARCH_U8500 || COMPILE_TEST + +config USB_MUSB_JZ4740 + tristate "JZ4740" + depends on OF + depends on MIPS || COMPILE_TEST + depends on USB_MUSB_GADGET + select USB_ROLE_SWITCH + +config USB_MUSB_MEDIATEK + tristate "MediaTek platforms" + depends on ARCH_MEDIATEK || COMPILE_TEST + depends on NOP_USB_XCEIV + select GENERIC_PHY + select USB_ROLE_SWITCH + +config USB_MUSB_POLARFIRE_SOC + tristate "Microchip PolarFire SoC platforms" + depends on ARCH_MICROCHIP_POLARFIRE || COMPILE_TEST + depends on NOP_USB_XCEIV + select USB_MUSB_DUAL_ROLE + help + Say Y here to enable support for USB on Microchip's PolarFire SoC. + + This support is also available as a module. If so, the module + will be called mpfs. + +comment "MUSB DMA mode" + +config MUSB_PIO_ONLY + bool 'Disable DMA (always use PIO)' + help + All data is copied between memory and FIFO by the CPU. + DMA controllers are ignored. + + Do not choose this unless DMA support for your SOC or board + is unavailable (or unstable). When DMA is enabled at compile time, + you can still disable it at run time using the "use_dma=n" module + parameter. + +if !MUSB_PIO_ONLY + +config USB_UX500_DMA + bool 'ST Ericsson Ux500' + depends on USB_MUSB_UX500 + help + Enable DMA transfers on UX500 platforms. + +config USB_INVENTRA_DMA + bool 'Inventra' + depends on USB_MUSB_OMAP2PLUS || USB_MUSB_MEDIATEK || USB_MUSB_JZ4740 || USB_MUSB_POLARFIRE_SOC + help + Enable DMA transfers using Mentor's engine. + +config USB_TI_CPPI41_DMA + bool 'TI CPPI 4.1' + depends on (ARCH_OMAP || ARCH_DAVINCI_DA8XX) && DMADEVICES + select TI_CPPI41 + +config USB_TUSB_OMAP_DMA + bool 'TUSB 6010' + depends on USB_MUSB_TUSB6010 = USB_MUSB_HDRC # both built-in or both modules + depends on ARCH_OMAP + help + Enable DMA transfers on TUSB 6010 when OMAP DMA is available. + +endif # !MUSB_PIO_ONLY + +endif # USB_MUSB_HDRC |