diff options
Diffstat (limited to 'drivers/w1/masters/w1-gpio.c')
| -rw-r--r-- | drivers/w1/masters/w1-gpio.c | 118 |
1 files changed, 42 insertions, 76 deletions
diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c index e45acb6d91..05c67038ed 100644 --- a/drivers/w1/masters/w1-gpio.c +++ b/drivers/w1/masters/w1-gpio.c @@ -9,7 +9,6 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/slab.h> -#include <linux/w1-gpio.h> #include <linux/gpio/consumer.h> #include <linux/of_platform.h> #include <linux/err.h> @@ -18,27 +17,33 @@ #include <linux/w1.h> +struct w1_gpio_ddata { + struct gpio_desc *gpiod; + struct gpio_desc *pullup_gpiod; + unsigned int pullup_duration; +}; + static u8 w1_gpio_set_pullup(void *data, int delay) { - struct w1_gpio_platform_data *pdata = data; + struct w1_gpio_ddata *ddata = data; if (delay) { - pdata->pullup_duration = delay; + ddata->pullup_duration = delay; } else { - if (pdata->pullup_duration) { + if (ddata->pullup_duration) { /* * This will OVERRIDE open drain emulation and force-pull * the line high for some time. */ - gpiod_set_raw_value(pdata->gpiod, 1); - msleep(pdata->pullup_duration); + gpiod_set_raw_value(ddata->gpiod, 1); + msleep(ddata->pullup_duration); /* * This will simply set the line as input since we are doing * open drain emulation in the GPIO library. */ - gpiod_set_value(pdata->gpiod, 1); + gpiod_set_value(ddata->gpiod, 1); } - pdata->pullup_duration = 0; + ddata->pullup_duration = 0; } return 0; @@ -46,16 +51,16 @@ static u8 w1_gpio_set_pullup(void *data, int delay) static void w1_gpio_write_bit(void *data, u8 bit) { - struct w1_gpio_platform_data *pdata = data; + struct w1_gpio_ddata *ddata = data; - gpiod_set_value(pdata->gpiod, bit); + gpiod_set_value(ddata->gpiod, bit); } static u8 w1_gpio_read_bit(void *data) { - struct w1_gpio_platform_data *pdata = data; + struct w1_gpio_ddata *ddata = data; - return gpiod_get_value(pdata->gpiod) ? 1 : 0; + return gpiod_get_value(ddata->gpiod) ? 1 : 0; } #if defined(CONFIG_OF) @@ -69,58 +74,48 @@ MODULE_DEVICE_TABLE(of, w1_gpio_dt_ids); static int w1_gpio_probe(struct platform_device *pdev) { struct w1_bus_master *master; - struct w1_gpio_platform_data *pdata; + struct w1_gpio_ddata *ddata; struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; /* Enforce open drain mode by default */ enum gpiod_flags gflags = GPIOD_OUT_LOW_OPEN_DRAIN; int err; - if (of_have_populated_dt()) { - pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); - if (!pdata) - return -ENOMEM; - - /* - * This parameter means that something else than the gpiolib has - * already set the line into open drain mode, so we should just - * driver it high/low like we are in full control of the line and - * open drain will happen transparently. - */ - if (of_property_present(np, "linux,open-drain")) - gflags = GPIOD_OUT_LOW; - - pdev->dev.platform_data = pdata; - } - pdata = dev_get_platdata(dev); + ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL); + if (!ddata) + return -ENOMEM; - if (!pdata) { - dev_err(dev, "No configuration data\n"); - return -ENXIO; - } + /* + * This parameter means that something else than the gpiolib has + * already set the line into open drain mode, so we should just + * driver it high/low like we are in full control of the line and + * open drain will happen transparently. + */ + if (of_property_present(np, "linux,open-drain")) + gflags = GPIOD_OUT_LOW; master = devm_kzalloc(dev, sizeof(struct w1_bus_master), GFP_KERNEL); if (!master) return -ENOMEM; - pdata->gpiod = devm_gpiod_get_index(dev, NULL, 0, gflags); - if (IS_ERR(pdata->gpiod)) { + ddata->gpiod = devm_gpiod_get_index(dev, NULL, 0, gflags); + if (IS_ERR(ddata->gpiod)) { dev_err(dev, "gpio_request (pin) failed\n"); - return PTR_ERR(pdata->gpiod); + return PTR_ERR(ddata->gpiod); } - pdata->pullup_gpiod = + ddata->pullup_gpiod = devm_gpiod_get_index_optional(dev, NULL, 1, GPIOD_OUT_LOW); - if (IS_ERR(pdata->pullup_gpiod)) { + if (IS_ERR(ddata->pullup_gpiod)) { dev_err(dev, "gpio_request_one " "(ext_pullup_enable_pin) failed\n"); - return PTR_ERR(pdata->pullup_gpiod); + return PTR_ERR(ddata->pullup_gpiod); } - master->data = pdata; + master->data = ddata; master->read_bit = w1_gpio_read_bit; - gpiod_direction_output(pdata->gpiod, 1); + gpiod_direction_output(ddata->gpiod, 1); master->write_bit = w1_gpio_write_bit; /* @@ -138,11 +133,8 @@ static int w1_gpio_probe(struct platform_device *pdev) return err; } - if (pdata->enable_external_pullup) - pdata->enable_external_pullup(1); - - if (pdata->pullup_gpiod) - gpiod_set_value(pdata->pullup_gpiod, 1); + if (ddata->pullup_gpiod) + gpiod_set_value(ddata->pullup_gpiod, 1); platform_set_drvdata(pdev, master); @@ -152,45 +144,19 @@ static int w1_gpio_probe(struct platform_device *pdev) static int w1_gpio_remove(struct platform_device *pdev) { struct w1_bus_master *master = platform_get_drvdata(pdev); - struct w1_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev); - - if (pdata->enable_external_pullup) - pdata->enable_external_pullup(0); + struct w1_gpio_ddata *ddata = master->data; - if (pdata->pullup_gpiod) - gpiod_set_value(pdata->pullup_gpiod, 0); + if (ddata->pullup_gpiod) + gpiod_set_value(ddata->pullup_gpiod, 0); w1_remove_master_device(master); return 0; } -static int __maybe_unused w1_gpio_suspend(struct device *dev) -{ - struct w1_gpio_platform_data *pdata = dev_get_platdata(dev); - - if (pdata->enable_external_pullup) - pdata->enable_external_pullup(0); - - return 0; -} - -static int __maybe_unused w1_gpio_resume(struct device *dev) -{ - struct w1_gpio_platform_data *pdata = dev_get_platdata(dev); - - if (pdata->enable_external_pullup) - pdata->enable_external_pullup(1); - - return 0; -} - -static SIMPLE_DEV_PM_OPS(w1_gpio_pm_ops, w1_gpio_suspend, w1_gpio_resume); - static struct platform_driver w1_gpio_driver = { .driver = { .name = "w1-gpio", - .pm = &w1_gpio_pm_ops, .of_match_table = of_match_ptr(w1_gpio_dt_ids), }, .probe = w1_gpio_probe, |