summaryrefslogtreecommitdiffstats
path: root/include/crypto/skcipher.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/crypto/skcipher.h')
-rw-r--r--include/crypto/skcipher.h296
1 files changed, 279 insertions, 17 deletions
diff --git a/include/crypto/skcipher.h b/include/crypto/skcipher.h
index 080d1ba361..ea18af4834 100644
--- a/include/crypto/skcipher.h
+++ b/include/crypto/skcipher.h
@@ -49,6 +49,10 @@ struct crypto_sync_skcipher {
struct crypto_skcipher base;
};
+struct crypto_lskcipher {
+ struct crypto_tfm base;
+};
+
/*
* struct crypto_istat_cipher - statistics for cipher algorithm
* @encrypt_cnt: number of encrypt requests
@@ -65,6 +69,43 @@ struct crypto_istat_cipher {
atomic64_t err_cnt;
};
+#ifdef CONFIG_CRYPTO_STATS
+#define SKCIPHER_ALG_COMMON_STAT struct crypto_istat_cipher stat;
+#else
+#define SKCIPHER_ALG_COMMON_STAT
+#endif
+
+/*
+ * struct skcipher_alg_common - common properties of skcipher_alg
+ * @min_keysize: Minimum key size supported by the transformation. This is the
+ * smallest key length supported by this transformation algorithm.
+ * This must be set to one of the pre-defined values as this is
+ * not hardware specific. Possible values for this field can be
+ * found via git grep "_MIN_KEY_SIZE" include/crypto/
+ * @max_keysize: Maximum key size supported by the transformation. This is the
+ * largest key length supported by this transformation algorithm.
+ * This must be set to one of the pre-defined values as this is
+ * not hardware specific. Possible values for this field can be
+ * found via git grep "_MAX_KEY_SIZE" include/crypto/
+ * @ivsize: IV size applicable for transformation. The consumer must provide an
+ * IV of exactly that size to perform the encrypt or decrypt operation.
+ * @chunksize: Equal to the block size except for stream ciphers such as
+ * CTR where it is set to the underlying block size.
+ * @stat: Statistics for cipher algorithm
+ * @base: Definition of a generic crypto algorithm.
+ */
+#define SKCIPHER_ALG_COMMON { \
+ unsigned int min_keysize; \
+ unsigned int max_keysize; \
+ unsigned int ivsize; \
+ unsigned int chunksize; \
+ \
+ SKCIPHER_ALG_COMMON_STAT \
+ \
+ struct crypto_alg base; \
+}
+struct skcipher_alg_common SKCIPHER_ALG_COMMON;
+
/**
* struct skcipher_alg - symmetric key cipher definition
* @min_keysize: Minimum key size supported by the transformation. This is the
@@ -120,6 +161,7 @@ struct crypto_istat_cipher {
* in parallel. Should be a multiple of chunksize.
* @stat: Statistics for cipher algorithm
* @base: Definition of a generic crypto algorithm.
+ * @co: see struct skcipher_alg_common
*
* All fields except @ivsize are mandatory and must be filled.
*/
@@ -131,17 +173,55 @@ struct skcipher_alg {
int (*init)(struct crypto_skcipher *tfm);
void (*exit)(struct crypto_skcipher *tfm);
- unsigned int min_keysize;
- unsigned int max_keysize;
- unsigned int ivsize;
- unsigned int chunksize;
unsigned int walksize;
-#ifdef CONFIG_CRYPTO_STATS
- struct crypto_istat_cipher stat;
-#endif
+ union {
+ struct SKCIPHER_ALG_COMMON;
+ struct skcipher_alg_common co;
+ };
+};
- struct crypto_alg base;
+/**
+ * struct lskcipher_alg - linear symmetric key cipher definition
+ * @setkey: Set key for the transformation. This function is used to either
+ * program a supplied key into the hardware or store the key in the
+ * transformation context for programming it later. Note that this
+ * function does modify the transformation context. This function can
+ * be called multiple times during the existence of the transformation
+ * object, so one must make sure the key is properly reprogrammed into
+ * the hardware. This function is also responsible for checking the key
+ * length for validity. In case a software fallback was put in place in
+ * the @cra_init call, this function might need to use the fallback if
+ * the algorithm doesn't support all of the key sizes.
+ * @encrypt: Encrypt a number of bytes. This function is used to encrypt
+ * the supplied data. This function shall not modify
+ * the transformation context, as this function may be called
+ * in parallel with the same transformation object. Data
+ * may be left over if length is not a multiple of blocks
+ * and there is more to come (final == false). The number of
+ * left-over bytes should be returned in case of success.
+ * @decrypt: Decrypt a number of bytes. This is a reverse counterpart to
+ * @encrypt and the conditions are exactly the same.
+ * @init: Initialize the cryptographic transformation object. This function
+ * is used to initialize the cryptographic transformation object.
+ * This function is called only once at the instantiation time, right
+ * after the transformation context was allocated.
+ * @exit: Deinitialize the cryptographic transformation object. This is a
+ * counterpart to @init, used to remove various changes set in
+ * @init.
+ * @co: see struct skcipher_alg_common
+ */
+struct lskcipher_alg {
+ int (*setkey)(struct crypto_lskcipher *tfm, const u8 *key,
+ unsigned int keylen);
+ int (*encrypt)(struct crypto_lskcipher *tfm, const u8 *src,
+ u8 *dst, unsigned len, u8 *iv, bool final);
+ int (*decrypt)(struct crypto_lskcipher *tfm, const u8 *src,
+ u8 *dst, unsigned len, u8 *iv, bool final);
+ int (*init)(struct crypto_lskcipher *tfm);
+ void (*exit)(struct crypto_lskcipher *tfm);
+
+ struct skcipher_alg_common co;
};
#define MAX_SYNC_SKCIPHER_REQSIZE 384
@@ -213,12 +293,36 @@ struct crypto_skcipher *crypto_alloc_skcipher(const char *alg_name,
struct crypto_sync_skcipher *crypto_alloc_sync_skcipher(const char *alg_name,
u32 type, u32 mask);
+
+/**
+ * crypto_alloc_lskcipher() - allocate linear symmetric key cipher handle
+ * @alg_name: is the cra_name / name or cra_driver_name / driver name of the
+ * lskcipher
+ * @type: specifies the type of the cipher
+ * @mask: specifies the mask for the cipher
+ *
+ * Allocate a cipher handle for an lskcipher. The returned struct
+ * crypto_lskcipher is the cipher handle that is required for any subsequent
+ * API invocation for that lskcipher.
+ *
+ * Return: allocated cipher handle in case of success; IS_ERR() is true in case
+ * of an error, PTR_ERR() returns the error code.
+ */
+struct crypto_lskcipher *crypto_alloc_lskcipher(const char *alg_name,
+ u32 type, u32 mask);
+
static inline struct crypto_tfm *crypto_skcipher_tfm(
struct crypto_skcipher *tfm)
{
return &tfm->base;
}
+static inline struct crypto_tfm *crypto_lskcipher_tfm(
+ struct crypto_lskcipher *tfm)
+{
+ return &tfm->base;
+}
+
/**
* crypto_free_skcipher() - zeroize and free cipher handle
* @tfm: cipher handle to be freed
@@ -236,6 +340,17 @@ static inline void crypto_free_sync_skcipher(struct crypto_sync_skcipher *tfm)
}
/**
+ * crypto_free_lskcipher() - zeroize and free cipher handle
+ * @tfm: cipher handle to be freed
+ *
+ * If @tfm is a NULL or error pointer, this function does nothing.
+ */
+static inline void crypto_free_lskcipher(struct crypto_lskcipher *tfm)
+{
+ crypto_destroy_tfm(tfm, crypto_lskcipher_tfm(tfm));
+}
+
+/**
* crypto_has_skcipher() - Search for the availability of an skcipher.
* @alg_name: is the cra_name / name or cra_driver_name / driver name of the
* skcipher
@@ -253,6 +368,19 @@ static inline const char *crypto_skcipher_driver_name(
return crypto_tfm_alg_driver_name(crypto_skcipher_tfm(tfm));
}
+static inline const char *crypto_lskcipher_driver_name(
+ struct crypto_lskcipher *tfm)
+{
+ return crypto_tfm_alg_driver_name(crypto_lskcipher_tfm(tfm));
+}
+
+static inline struct skcipher_alg_common *crypto_skcipher_alg_common(
+ struct crypto_skcipher *tfm)
+{
+ return container_of(crypto_skcipher_tfm(tfm)->__crt_alg,
+ struct skcipher_alg_common, base);
+}
+
static inline struct skcipher_alg *crypto_skcipher_alg(
struct crypto_skcipher *tfm)
{
@@ -260,9 +388,11 @@ static inline struct skcipher_alg *crypto_skcipher_alg(
struct skcipher_alg, base);
}
-static inline unsigned int crypto_skcipher_alg_ivsize(struct skcipher_alg *alg)
+static inline struct lskcipher_alg *crypto_lskcipher_alg(
+ struct crypto_lskcipher *tfm)
{
- return alg->ivsize;
+ return container_of(crypto_lskcipher_tfm(tfm)->__crt_alg,
+ struct lskcipher_alg, co.base);
}
/**
@@ -276,7 +406,7 @@ static inline unsigned int crypto_skcipher_alg_ivsize(struct skcipher_alg *alg)
*/
static inline unsigned int crypto_skcipher_ivsize(struct crypto_skcipher *tfm)
{
- return crypto_skcipher_alg(tfm)->ivsize;
+ return crypto_skcipher_alg_common(tfm)->ivsize;
}
static inline unsigned int crypto_sync_skcipher_ivsize(
@@ -286,6 +416,21 @@ static inline unsigned int crypto_sync_skcipher_ivsize(
}
/**
+ * crypto_lskcipher_ivsize() - obtain IV size
+ * @tfm: cipher handle
+ *
+ * The size of the IV for the lskcipher referenced by the cipher handle is
+ * returned. This IV size may be zero if the cipher does not need an IV.
+ *
+ * Return: IV size in bytes
+ */
+static inline unsigned int crypto_lskcipher_ivsize(
+ struct crypto_lskcipher *tfm)
+{
+ return crypto_lskcipher_alg(tfm)->co.ivsize;
+}
+
+/**
* crypto_skcipher_blocksize() - obtain block size of cipher
* @tfm: cipher handle
*
@@ -301,10 +446,20 @@ static inline unsigned int crypto_skcipher_blocksize(
return crypto_tfm_alg_blocksize(crypto_skcipher_tfm(tfm));
}
-static inline unsigned int crypto_skcipher_alg_chunksize(
- struct skcipher_alg *alg)
+/**
+ * crypto_lskcipher_blocksize() - obtain block size of cipher
+ * @tfm: cipher handle
+ *
+ * The block size for the lskcipher referenced with the cipher handle is
+ * returned. The caller may use that information to allocate appropriate
+ * memory for the data returned by the encryption or decryption operation
+ *
+ * Return: block size of cipher
+ */
+static inline unsigned int crypto_lskcipher_blocksize(
+ struct crypto_lskcipher *tfm)
{
- return alg->chunksize;
+ return crypto_tfm_alg_blocksize(crypto_lskcipher_tfm(tfm));
}
/**
@@ -321,7 +476,24 @@ static inline unsigned int crypto_skcipher_alg_chunksize(
static inline unsigned int crypto_skcipher_chunksize(
struct crypto_skcipher *tfm)
{
- return crypto_skcipher_alg_chunksize(crypto_skcipher_alg(tfm));
+ return crypto_skcipher_alg_common(tfm)->chunksize;
+}
+
+/**
+ * crypto_lskcipher_chunksize() - obtain chunk size
+ * @tfm: cipher handle
+ *
+ * The block size is set to one for ciphers such as CTR. However,
+ * you still need to provide incremental updates in multiples of
+ * the underlying block size as the IV does not have sub-block
+ * granularity. This is known in this API as the chunk size.
+ *
+ * Return: chunk size in bytes
+ */
+static inline unsigned int crypto_lskcipher_chunksize(
+ struct crypto_lskcipher *tfm)
+{
+ return crypto_lskcipher_alg(tfm)->co.chunksize;
}
static inline unsigned int crypto_sync_skcipher_blocksize(
@@ -336,6 +508,12 @@ static inline unsigned int crypto_skcipher_alignmask(
return crypto_tfm_alg_alignmask(crypto_skcipher_tfm(tfm));
}
+static inline unsigned int crypto_lskcipher_alignmask(
+ struct crypto_lskcipher *tfm)
+{
+ return crypto_tfm_alg_alignmask(crypto_lskcipher_tfm(tfm));
+}
+
static inline u32 crypto_skcipher_get_flags(struct crypto_skcipher *tfm)
{
return crypto_tfm_get_flags(crypto_skcipher_tfm(tfm));
@@ -371,6 +549,23 @@ static inline void crypto_sync_skcipher_clear_flags(
crypto_skcipher_clear_flags(&tfm->base, flags);
}
+static inline u32 crypto_lskcipher_get_flags(struct crypto_lskcipher *tfm)
+{
+ return crypto_tfm_get_flags(crypto_lskcipher_tfm(tfm));
+}
+
+static inline void crypto_lskcipher_set_flags(struct crypto_lskcipher *tfm,
+ u32 flags)
+{
+ crypto_tfm_set_flags(crypto_lskcipher_tfm(tfm), flags);
+}
+
+static inline void crypto_lskcipher_clear_flags(struct crypto_lskcipher *tfm,
+ u32 flags)
+{
+ crypto_tfm_clear_flags(crypto_lskcipher_tfm(tfm), flags);
+}
+
/**
* crypto_skcipher_setkey() - set key for cipher
* @tfm: cipher handle
@@ -396,16 +591,47 @@ static inline int crypto_sync_skcipher_setkey(struct crypto_sync_skcipher *tfm,
return crypto_skcipher_setkey(&tfm->base, key, keylen);
}
+/**
+ * crypto_lskcipher_setkey() - set key for cipher
+ * @tfm: cipher handle
+ * @key: buffer holding the key
+ * @keylen: length of the key in bytes
+ *
+ * The caller provided key is set for the lskcipher referenced by the cipher
+ * handle.
+ *
+ * Note, the key length determines the cipher type. Many block ciphers implement
+ * different cipher modes depending on the key size, such as AES-128 vs AES-192
+ * vs. AES-256. When providing a 16 byte key for an AES cipher handle, AES-128
+ * is performed.
+ *
+ * Return: 0 if the setting of the key was successful; < 0 if an error occurred
+ */
+int crypto_lskcipher_setkey(struct crypto_lskcipher *tfm,
+ const u8 *key, unsigned int keylen);
+
static inline unsigned int crypto_skcipher_min_keysize(
struct crypto_skcipher *tfm)
{
- return crypto_skcipher_alg(tfm)->min_keysize;
+ return crypto_skcipher_alg_common(tfm)->min_keysize;
}
static inline unsigned int crypto_skcipher_max_keysize(
struct crypto_skcipher *tfm)
{
- return crypto_skcipher_alg(tfm)->max_keysize;
+ return crypto_skcipher_alg_common(tfm)->max_keysize;
+}
+
+static inline unsigned int crypto_lskcipher_min_keysize(
+ struct crypto_lskcipher *tfm)
+{
+ return crypto_lskcipher_alg(tfm)->co.min_keysize;
+}
+
+static inline unsigned int crypto_lskcipher_max_keysize(
+ struct crypto_lskcipher *tfm)
+{
+ return crypto_lskcipher_alg(tfm)->co.max_keysize;
}
/**
@@ -458,6 +684,42 @@ int crypto_skcipher_encrypt(struct skcipher_request *req);
int crypto_skcipher_decrypt(struct skcipher_request *req);
/**
+ * crypto_lskcipher_encrypt() - encrypt plaintext
+ * @tfm: lskcipher handle
+ * @src: source buffer
+ * @dst: destination buffer
+ * @len: number of bytes to process
+ * @iv: IV for the cipher operation which must comply with the IV size defined
+ * by crypto_lskcipher_ivsize
+ *
+ * Encrypt plaintext data using the lskcipher handle.
+ *
+ * Return: >=0 if the cipher operation was successful, if positive
+ * then this many bytes have been left unprocessed;
+ * < 0 if an error occurred
+ */
+int crypto_lskcipher_encrypt(struct crypto_lskcipher *tfm, const u8 *src,
+ u8 *dst, unsigned len, u8 *iv);
+
+/**
+ * crypto_lskcipher_decrypt() - decrypt ciphertext
+ * @tfm: lskcipher handle
+ * @src: source buffer
+ * @dst: destination buffer
+ * @len: number of bytes to process
+ * @iv: IV for the cipher operation which must comply with the IV size defined
+ * by crypto_lskcipher_ivsize
+ *
+ * Decrypt ciphertext data using the lskcipher handle.
+ *
+ * Return: >=0 if the cipher operation was successful, if positive
+ * then this many bytes have been left unprocessed;
+ * < 0 if an error occurred
+ */
+int crypto_lskcipher_decrypt(struct crypto_lskcipher *tfm, const u8 *src,
+ u8 *dst, unsigned len, u8 *iv);
+
+/**
* DOC: Symmetric Key Cipher Request Handle
*
* The skcipher_request data structure contains all pointers to data