summaryrefslogtreecommitdiffstats
path: root/include/drm/gud.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/drm/gud.h')
-rw-r--r--include/drm/gud.h335
1 files changed, 335 insertions, 0 deletions
diff --git a/include/drm/gud.h b/include/drm/gud.h
new file mode 100644
index 000000000..c52a8ba4a
--- /dev/null
+++ b/include/drm/gud.h
@@ -0,0 +1,335 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright 2020 Noralf Trønnes
+ */
+
+#ifndef __LINUX_GUD_H
+#define __LINUX_GUD_H
+
+#include <linux/types.h>
+
+/*
+ * struct gud_display_descriptor_req - Display descriptor
+ * @magic: Magic value GUD_DISPLAY_MAGIC
+ * @version: Protocol version
+ * @flags: Flags
+ * - STATUS_ON_SET: Always do a status request after a SET request.
+ * This is used by the Linux gadget driver since it has
+ * no way to control the status stage of a control OUT
+ * request that has a payload.
+ * - FULL_UPDATE: Always send the entire framebuffer when flushing changes.
+ * The GUD_REQ_SET_BUFFER request will not be sent
+ * before each bulk transfer, it will only be sent if the
+ * previous bulk transfer had failed. This gives the device
+ * a chance to reset its state machine if needed.
+ * This flag can not be used in combination with compression.
+ * @compression: Supported compression types
+ * - GUD_COMPRESSION_LZ4: LZ4 lossless compression.
+ * @max_buffer_size: Maximum buffer size the device can handle (optional).
+ * This is useful for devices that don't have a big enough
+ * buffer to decompress the entire framebuffer in one go.
+ * @min_width: Minimum pixel width the controller can handle
+ * @max_width: Maximum width
+ * @min_height: Minimum height
+ * @max_height: Maximum height
+ *
+ * Devices that have only one display mode will have min_width == max_width
+ * and min_height == max_height.
+ */
+struct gud_display_descriptor_req {
+ __le32 magic;
+#define GUD_DISPLAY_MAGIC 0x1d50614d
+ __u8 version;
+ __le32 flags;
+#define GUD_DISPLAY_FLAG_STATUS_ON_SET BIT(0)
+#define GUD_DISPLAY_FLAG_FULL_UPDATE BIT(1)
+ __u8 compression;
+#define GUD_COMPRESSION_LZ4 BIT(0)
+ __le32 max_buffer_size;
+ __le32 min_width;
+ __le32 max_width;
+ __le32 min_height;
+ __le32 max_height;
+} __packed;
+
+/*
+ * struct gud_property_req - Property
+ * @prop: Property
+ * @val: Value
+ */
+struct gud_property_req {
+ __le16 prop;
+ __le64 val;
+} __packed;
+
+/*
+ * struct gud_display_mode_req - Display mode
+ * @clock: Pixel clock in kHz
+ * @hdisplay: Horizontal display size
+ * @hsync_start: Horizontal sync start
+ * @hsync_end: Horizontal sync end
+ * @htotal: Horizontal total size
+ * @vdisplay: Vertical display size
+ * @vsync_start: Vertical sync start
+ * @vsync_end: Vertical sync end
+ * @vtotal: Vertical total size
+ * @flags: Bits 0-13 are the same as in the RandR protocol and also what DRM uses.
+ * The deprecated bits are reused for internal protocol flags leaving us
+ * free to follow DRM for the other bits in the future.
+ * - FLAG_PREFERRED: Set on the preferred display mode.
+ */
+struct gud_display_mode_req {
+ __le32 clock;
+ __le16 hdisplay;
+ __le16 hsync_start;
+ __le16 hsync_end;
+ __le16 htotal;
+ __le16 vdisplay;
+ __le16 vsync_start;
+ __le16 vsync_end;
+ __le16 vtotal;
+ __le32 flags;
+#define GUD_DISPLAY_MODE_FLAG_PHSYNC BIT(0)
+#define GUD_DISPLAY_MODE_FLAG_NHSYNC BIT(1)
+#define GUD_DISPLAY_MODE_FLAG_PVSYNC BIT(2)
+#define GUD_DISPLAY_MODE_FLAG_NVSYNC BIT(3)
+#define GUD_DISPLAY_MODE_FLAG_INTERLACE BIT(4)
+#define GUD_DISPLAY_MODE_FLAG_DBLSCAN BIT(5)
+#define GUD_DISPLAY_MODE_FLAG_CSYNC BIT(6)
+#define GUD_DISPLAY_MODE_FLAG_PCSYNC BIT(7)
+#define GUD_DISPLAY_MODE_FLAG_NCSYNC BIT(8)
+#define GUD_DISPLAY_MODE_FLAG_HSKEW BIT(9)
+/* BCast and PixelMultiplex are deprecated */
+#define GUD_DISPLAY_MODE_FLAG_DBLCLK BIT(12)
+#define GUD_DISPLAY_MODE_FLAG_CLKDIV2 BIT(13)
+#define GUD_DISPLAY_MODE_FLAG_USER_MASK \
+ (GUD_DISPLAY_MODE_FLAG_PHSYNC | GUD_DISPLAY_MODE_FLAG_NHSYNC | \
+ GUD_DISPLAY_MODE_FLAG_PVSYNC | GUD_DISPLAY_MODE_FLAG_NVSYNC | \
+ GUD_DISPLAY_MODE_FLAG_INTERLACE | GUD_DISPLAY_MODE_FLAG_DBLSCAN | \
+ GUD_DISPLAY_MODE_FLAG_CSYNC | GUD_DISPLAY_MODE_FLAG_PCSYNC | \
+ GUD_DISPLAY_MODE_FLAG_NCSYNC | GUD_DISPLAY_MODE_FLAG_HSKEW | \
+ GUD_DISPLAY_MODE_FLAG_DBLCLK | GUD_DISPLAY_MODE_FLAG_CLKDIV2)
+/* Internal protocol flags */
+#define GUD_DISPLAY_MODE_FLAG_PREFERRED BIT(10)
+} __packed;
+
+/*
+ * struct gud_connector_descriptor_req - Connector descriptor
+ * @connector_type: Connector type (GUD_CONNECTOR_TYPE_*).
+ * If the host doesn't support the type it should fall back to PANEL.
+ * @flags: Flags
+ * - POLL_STATUS: Connector status can change (polled every 10 seconds)
+ * - INTERLACE: Interlaced modes are supported
+ * - DOUBLESCAN: Doublescan modes are supported
+ */
+struct gud_connector_descriptor_req {
+ __u8 connector_type;
+#define GUD_CONNECTOR_TYPE_PANEL 0
+#define GUD_CONNECTOR_TYPE_VGA 1
+#define GUD_CONNECTOR_TYPE_COMPOSITE 2
+#define GUD_CONNECTOR_TYPE_SVIDEO 3
+#define GUD_CONNECTOR_TYPE_COMPONENT 4
+#define GUD_CONNECTOR_TYPE_DVI 5
+#define GUD_CONNECTOR_TYPE_DISPLAYPORT 6
+#define GUD_CONNECTOR_TYPE_HDMI 7
+ __le32 flags;
+#define GUD_CONNECTOR_FLAGS_POLL_STATUS BIT(0)
+#define GUD_CONNECTOR_FLAGS_INTERLACE BIT(1)
+#define GUD_CONNECTOR_FLAGS_DOUBLESCAN BIT(2)
+} __packed;
+
+/*
+ * struct gud_set_buffer_req - Set buffer transfer info
+ * @x: X position of rectangle
+ * @y: Y position
+ * @width: Pixel width of rectangle
+ * @height: Pixel height
+ * @length: Buffer length in bytes
+ * @compression: Transfer compression
+ * @compressed_length: Compressed buffer length
+ *
+ * This request is issued right before the bulk transfer.
+ * @x, @y, @width and @height specifies the rectangle where the buffer should be
+ * placed inside the framebuffer.
+ */
+struct gud_set_buffer_req {
+ __le32 x;
+ __le32 y;
+ __le32 width;
+ __le32 height;
+ __le32 length;
+ __u8 compression;
+ __le32 compressed_length;
+} __packed;
+
+/*
+ * struct gud_state_req - Display state
+ * @mode: Display mode
+ * @format: Pixel format GUD_PIXEL_FORMAT_*
+ * @connector: Connector index
+ * @properties: Array of properties
+ *
+ * The entire state is transferred each time there's a change.
+ */
+struct gud_state_req {
+ struct gud_display_mode_req mode;
+ __u8 format;
+ __u8 connector;
+ struct gud_property_req properties[];
+} __packed;
+
+/* List of supported connector properties: */
+
+/* Margins in pixels to deal with overscan, range 0-100 */
+#define GUD_PROPERTY_TV_LEFT_MARGIN 1
+#define GUD_PROPERTY_TV_RIGHT_MARGIN 2
+#define GUD_PROPERTY_TV_TOP_MARGIN 3
+#define GUD_PROPERTY_TV_BOTTOM_MARGIN 4
+#define GUD_PROPERTY_TV_MODE 5
+/* Brightness in percent, range 0-100 */
+#define GUD_PROPERTY_TV_BRIGHTNESS 6
+/* Contrast in percent, range 0-100 */
+#define GUD_PROPERTY_TV_CONTRAST 7
+/* Flicker reduction in percent, range 0-100 */
+#define GUD_PROPERTY_TV_FLICKER_REDUCTION 8
+/* Overscan in percent, range 0-100 */
+#define GUD_PROPERTY_TV_OVERSCAN 9
+/* Saturation in percent, range 0-100 */
+#define GUD_PROPERTY_TV_SATURATION 10
+/* Hue in percent, range 0-100 */
+#define GUD_PROPERTY_TV_HUE 11
+
+/*
+ * Backlight brightness is in the range 0-100 inclusive. The value represents the human perceptual
+ * brightness and not a linear PWM value. 0 is minimum brightness which should not turn the
+ * backlight completely off. The DPMS connector property should be used to control power which will
+ * trigger a GUD_REQ_SET_DISPLAY_ENABLE request.
+ *
+ * This does not map to a DRM property, it is used with the backlight device.
+ */
+#define GUD_PROPERTY_BACKLIGHT_BRIGHTNESS 12
+
+/* List of supported properties that are not connector propeties: */
+
+/*
+ * Plane rotation. Should return the supported bitmask on
+ * GUD_REQ_GET_PROPERTIES. GUD_ROTATION_0 is mandatory.
+ *
+ * Note: This is not display rotation so 90/270 will need scaling to make it fit (unless squared).
+ */
+#define GUD_PROPERTY_ROTATION 50
+ #define GUD_ROTATION_0 BIT(0)
+ #define GUD_ROTATION_90 BIT(1)
+ #define GUD_ROTATION_180 BIT(2)
+ #define GUD_ROTATION_270 BIT(3)
+ #define GUD_ROTATION_REFLECT_X BIT(4)
+ #define GUD_ROTATION_REFLECT_Y BIT(5)
+ #define GUD_ROTATION_MASK (GUD_ROTATION_0 | GUD_ROTATION_90 | \
+ GUD_ROTATION_180 | GUD_ROTATION_270 | \
+ GUD_ROTATION_REFLECT_X | GUD_ROTATION_REFLECT_Y)
+
+/* USB Control requests: */
+
+/* Get status from the last GET/SET control request. Value is u8. */
+#define GUD_REQ_GET_STATUS 0x00
+ /* Status values: */
+ #define GUD_STATUS_OK 0x00
+ #define GUD_STATUS_BUSY 0x01
+ #define GUD_STATUS_REQUEST_NOT_SUPPORTED 0x02
+ #define GUD_STATUS_PROTOCOL_ERROR 0x03
+ #define GUD_STATUS_INVALID_PARAMETER 0x04
+ #define GUD_STATUS_ERROR 0x05
+
+/* Get display descriptor as a &gud_display_descriptor_req */
+#define GUD_REQ_GET_DESCRIPTOR 0x01
+
+/* Get supported pixel formats as a byte array of GUD_PIXEL_FORMAT_* */
+#define GUD_REQ_GET_FORMATS 0x40
+ #define GUD_FORMATS_MAX_NUM 32
+ #define GUD_PIXEL_FORMAT_R1 0x01 /* 1-bit monochrome */
+ #define GUD_PIXEL_FORMAT_R8 0x08 /* 8-bit greyscale */
+ #define GUD_PIXEL_FORMAT_XRGB1111 0x20
+ #define GUD_PIXEL_FORMAT_RGB332 0x30
+ #define GUD_PIXEL_FORMAT_RGB565 0x40
+ #define GUD_PIXEL_FORMAT_RGB888 0x50
+ #define GUD_PIXEL_FORMAT_XRGB8888 0x80
+ #define GUD_PIXEL_FORMAT_ARGB8888 0x81
+
+/*
+ * Get supported properties that are not connector propeties as a &gud_property_req array.
+ * gud_property_req.val often contains the initial value for the property.
+ */
+#define GUD_REQ_GET_PROPERTIES 0x41
+ #define GUD_PROPERTIES_MAX_NUM 32
+
+/* Connector requests have the connector index passed in the wValue field */
+
+/* Get connector descriptors as an array of &gud_connector_descriptor_req */
+#define GUD_REQ_GET_CONNECTORS 0x50
+ #define GUD_CONNECTORS_MAX_NUM 32
+
+/*
+ * Get properties supported by the connector as a &gud_property_req array.
+ * gud_property_req.val often contains the initial value for the property.
+ */
+#define GUD_REQ_GET_CONNECTOR_PROPERTIES 0x51
+ #define GUD_CONNECTOR_PROPERTIES_MAX_NUM 32
+
+/*
+ * Issued when there's a TV_MODE property present.
+ * Gets an array of the supported TV_MODE names each entry of length
+ * GUD_CONNECTOR_TV_MODE_NAME_LEN. Names must be NUL-terminated.
+ */
+#define GUD_REQ_GET_CONNECTOR_TV_MODE_VALUES 0x52
+ #define GUD_CONNECTOR_TV_MODE_NAME_LEN 16
+ #define GUD_CONNECTOR_TV_MODE_MAX_NUM 16
+
+/* When userspace checks connector status, this is issued first, not used for poll requests. */
+#define GUD_REQ_SET_CONNECTOR_FORCE_DETECT 0x53
+
+/*
+ * Get connector status. Value is u8.
+ *
+ * Userspace will get a HOTPLUG uevent if one of the following is true:
+ * - Connection status has changed since last
+ * - CHANGED is set
+ */
+#define GUD_REQ_GET_CONNECTOR_STATUS 0x54
+ #define GUD_CONNECTOR_STATUS_DISCONNECTED 0x00
+ #define GUD_CONNECTOR_STATUS_CONNECTED 0x01
+ #define GUD_CONNECTOR_STATUS_UNKNOWN 0x02
+ #define GUD_CONNECTOR_STATUS_CONNECTED_MASK 0x03
+ #define GUD_CONNECTOR_STATUS_CHANGED BIT(7)
+
+/*
+ * Display modes can be fetched as either EDID data or an array of &gud_display_mode_req.
+ *
+ * If GUD_REQ_GET_CONNECTOR_MODES returns zero, EDID is used to create display modes.
+ * If both display modes and EDID are returned, EDID is just passed on to userspace
+ * in the EDID connector property.
+ */
+
+/* Get &gud_display_mode_req array of supported display modes */
+#define GUD_REQ_GET_CONNECTOR_MODES 0x55
+ #define GUD_CONNECTOR_MAX_NUM_MODES 128
+
+/* Get Extended Display Identification Data */
+#define GUD_REQ_GET_CONNECTOR_EDID 0x56
+ #define GUD_CONNECTOR_MAX_EDID_LEN 2048
+
+/* Set buffer properties before bulk transfer as &gud_set_buffer_req */
+#define GUD_REQ_SET_BUFFER 0x60
+
+/* Check display configuration as &gud_state_req */
+#define GUD_REQ_SET_STATE_CHECK 0x61
+
+/* Apply the previous STATE_CHECK configuration */
+#define GUD_REQ_SET_STATE_COMMIT 0x62
+
+/* Enable/disable the display controller, value is u8: 0/1 */
+#define GUD_REQ_SET_CONTROLLER_ENABLE 0x63
+
+/* Enable/disable display/output (DPMS), value is u8: 0/1 */
+#define GUD_REQ_SET_DISPLAY_ENABLE 0x64
+
+#endif