diff options
Diffstat (limited to 'include/linux/avf/virtchnl.h')
-rw-r--r-- | include/linux/avf/virtchnl.h | 1610 |
1 files changed, 1610 insertions, 0 deletions
diff --git a/include/linux/avf/virtchnl.h b/include/linux/avf/virtchnl.h new file mode 100644 index 000000000..d0807ad43 --- /dev/null +++ b/include/linux/avf/virtchnl.h @@ -0,0 +1,1610 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* Copyright (c) 2013-2022, Intel Corporation. */ + +#ifndef _VIRTCHNL_H_ +#define _VIRTCHNL_H_ + +/* Description: + * This header file describes the Virtual Function (VF) - Physical Function + * (PF) communication protocol used by the drivers for all devices starting + * from our 40G product line + * + * Admin queue buffer usage: + * desc->opcode is always aqc_opc_send_msg_to_pf + * flags, retval, datalen, and data addr are all used normally. + * The Firmware copies the cookie fields when sending messages between the + * PF and VF, but uses all other fields internally. Due to this limitation, + * we must send all messages as "indirect", i.e. using an external buffer. + * + * All the VSI indexes are relative to the VF. Each VF can have maximum of + * three VSIs. All the queue indexes are relative to the VSI. Each VF can + * have a maximum of sixteen queues for all of its VSIs. + * + * The PF is required to return a status code in v_retval for all messages + * except RESET_VF, which does not require any response. The returned value + * is of virtchnl_status_code type, defined here. + * + * In general, VF driver initialization should roughly follow the order of + * these opcodes. The VF driver must first validate the API version of the + * PF driver, then request a reset, then get resources, then configure + * queues and interrupts. After these operations are complete, the VF + * driver may start its queues, optionally add MAC and VLAN filters, and + * process traffic. + */ + +/* START GENERIC DEFINES + * Need to ensure the following enums and defines hold the same meaning and + * value in current and future projects + */ + +/* Error Codes */ +enum virtchnl_status_code { + VIRTCHNL_STATUS_SUCCESS = 0, + VIRTCHNL_STATUS_ERR_PARAM = -5, + VIRTCHNL_STATUS_ERR_NO_MEMORY = -18, + VIRTCHNL_STATUS_ERR_OPCODE_MISMATCH = -38, + VIRTCHNL_STATUS_ERR_CQP_COMPL_ERROR = -39, + VIRTCHNL_STATUS_ERR_INVALID_VF_ID = -40, + VIRTCHNL_STATUS_ERR_ADMIN_QUEUE_ERROR = -53, + VIRTCHNL_STATUS_ERR_NOT_SUPPORTED = -64, +}; + +/* Backward compatibility */ +#define VIRTCHNL_ERR_PARAM VIRTCHNL_STATUS_ERR_PARAM +#define VIRTCHNL_STATUS_NOT_SUPPORTED VIRTCHNL_STATUS_ERR_NOT_SUPPORTED + +#define VIRTCHNL_LINK_SPEED_2_5GB_SHIFT 0x0 +#define VIRTCHNL_LINK_SPEED_100MB_SHIFT 0x1 +#define VIRTCHNL_LINK_SPEED_1000MB_SHIFT 0x2 +#define VIRTCHNL_LINK_SPEED_10GB_SHIFT 0x3 +#define VIRTCHNL_LINK_SPEED_40GB_SHIFT 0x4 +#define VIRTCHNL_LINK_SPEED_20GB_SHIFT 0x5 +#define VIRTCHNL_LINK_SPEED_25GB_SHIFT 0x6 +#define VIRTCHNL_LINK_SPEED_5GB_SHIFT 0x7 + +enum virtchnl_link_speed { + VIRTCHNL_LINK_SPEED_UNKNOWN = 0, + VIRTCHNL_LINK_SPEED_100MB = BIT(VIRTCHNL_LINK_SPEED_100MB_SHIFT), + VIRTCHNL_LINK_SPEED_1GB = BIT(VIRTCHNL_LINK_SPEED_1000MB_SHIFT), + VIRTCHNL_LINK_SPEED_10GB = BIT(VIRTCHNL_LINK_SPEED_10GB_SHIFT), + VIRTCHNL_LINK_SPEED_40GB = BIT(VIRTCHNL_LINK_SPEED_40GB_SHIFT), + VIRTCHNL_LINK_SPEED_20GB = BIT(VIRTCHNL_LINK_SPEED_20GB_SHIFT), + VIRTCHNL_LINK_SPEED_25GB = BIT(VIRTCHNL_LINK_SPEED_25GB_SHIFT), + VIRTCHNL_LINK_SPEED_2_5GB = BIT(VIRTCHNL_LINK_SPEED_2_5GB_SHIFT), + VIRTCHNL_LINK_SPEED_5GB = BIT(VIRTCHNL_LINK_SPEED_5GB_SHIFT), +}; + +/* for hsplit_0 field of Rx HMC context */ +/* deprecated with AVF 1.0 */ +enum virtchnl_rx_hsplit { + VIRTCHNL_RX_HSPLIT_NO_SPLIT = 0, + VIRTCHNL_RX_HSPLIT_SPLIT_L2 = 1, + VIRTCHNL_RX_HSPLIT_SPLIT_IP = 2, + VIRTCHNL_RX_HSPLIT_SPLIT_TCP_UDP = 4, + VIRTCHNL_RX_HSPLIT_SPLIT_SCTP = 8, +}; + +/* END GENERIC DEFINES */ + +/* Opcodes for VF-PF communication. These are placed in the v_opcode field + * of the virtchnl_msg structure. + */ +enum virtchnl_ops { +/* The PF sends status change events to VFs using + * the VIRTCHNL_OP_EVENT opcode. + * VFs send requests to the PF using the other ops. + * Use of "advanced opcode" features must be negotiated as part of capabilities + * exchange and are not considered part of base mode feature set. + */ + VIRTCHNL_OP_UNKNOWN = 0, + VIRTCHNL_OP_VERSION = 1, /* must ALWAYS be 1 */ + VIRTCHNL_OP_RESET_VF = 2, + VIRTCHNL_OP_GET_VF_RESOURCES = 3, + VIRTCHNL_OP_CONFIG_TX_QUEUE = 4, + VIRTCHNL_OP_CONFIG_RX_QUEUE = 5, + VIRTCHNL_OP_CONFIG_VSI_QUEUES = 6, + VIRTCHNL_OP_CONFIG_IRQ_MAP = 7, + VIRTCHNL_OP_ENABLE_QUEUES = 8, + VIRTCHNL_OP_DISABLE_QUEUES = 9, + VIRTCHNL_OP_ADD_ETH_ADDR = 10, + VIRTCHNL_OP_DEL_ETH_ADDR = 11, + VIRTCHNL_OP_ADD_VLAN = 12, + VIRTCHNL_OP_DEL_VLAN = 13, + VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE = 14, + VIRTCHNL_OP_GET_STATS = 15, + VIRTCHNL_OP_RSVD = 16, + VIRTCHNL_OP_EVENT = 17, /* must ALWAYS be 17 */ + /* opcode 19 is reserved */ + VIRTCHNL_OP_IWARP = 20, /* advanced opcode */ + VIRTCHNL_OP_RDMA = VIRTCHNL_OP_IWARP, + VIRTCHNL_OP_CONFIG_IWARP_IRQ_MAP = 21, /* advanced opcode */ + VIRTCHNL_OP_CONFIG_RDMA_IRQ_MAP = VIRTCHNL_OP_CONFIG_IWARP_IRQ_MAP, + VIRTCHNL_OP_RELEASE_IWARP_IRQ_MAP = 22, /* advanced opcode */ + VIRTCHNL_OP_RELEASE_RDMA_IRQ_MAP = VIRTCHNL_OP_RELEASE_IWARP_IRQ_MAP, + VIRTCHNL_OP_CONFIG_RSS_KEY = 23, + VIRTCHNL_OP_CONFIG_RSS_LUT = 24, + VIRTCHNL_OP_GET_RSS_HENA_CAPS = 25, + VIRTCHNL_OP_SET_RSS_HENA = 26, + VIRTCHNL_OP_ENABLE_VLAN_STRIPPING = 27, + VIRTCHNL_OP_DISABLE_VLAN_STRIPPING = 28, + VIRTCHNL_OP_REQUEST_QUEUES = 29, + VIRTCHNL_OP_ENABLE_CHANNELS = 30, + VIRTCHNL_OP_DISABLE_CHANNELS = 31, + VIRTCHNL_OP_ADD_CLOUD_FILTER = 32, + VIRTCHNL_OP_DEL_CLOUD_FILTER = 33, + /* opcode 34 - 43 are reserved */ + VIRTCHNL_OP_GET_SUPPORTED_RXDIDS = 44, + VIRTCHNL_OP_ADD_RSS_CFG = 45, + VIRTCHNL_OP_DEL_RSS_CFG = 46, + VIRTCHNL_OP_ADD_FDIR_FILTER = 47, + VIRTCHNL_OP_DEL_FDIR_FILTER = 48, + VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS = 51, + VIRTCHNL_OP_ADD_VLAN_V2 = 52, + VIRTCHNL_OP_DEL_VLAN_V2 = 53, + VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 = 54, + VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2 = 55, + VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2 = 56, + VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2 = 57, + VIRTCHNL_OP_MAX, +}; + +/* These macros are used to generate compilation errors if a structure/union + * is not exactly the correct length. It gives a divide by zero error if the + * structure/union is not of the correct size, otherwise it creates an enum + * that is never used. + */ +#define VIRTCHNL_CHECK_STRUCT_LEN(n, X) enum virtchnl_static_assert_enum_##X \ + { virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) } +#define VIRTCHNL_CHECK_UNION_LEN(n, X) enum virtchnl_static_asset_enum_##X \ + { virtchnl_static_assert_##X = (n)/((sizeof(union X) == (n)) ? 1 : 0) } + +/* Message descriptions and data structures. */ + +/* VIRTCHNL_OP_VERSION + * VF posts its version number to the PF. PF responds with its version number + * in the same format, along with a return code. + * Reply from PF has its major/minor versions also in param0 and param1. + * If there is a major version mismatch, then the VF cannot operate. + * If there is a minor version mismatch, then the VF can operate but should + * add a warning to the system log. + * + * This enum element MUST always be specified as == 1, regardless of other + * changes in the API. The PF must always respond to this message without + * error regardless of version mismatch. + */ +#define VIRTCHNL_VERSION_MAJOR 1 +#define VIRTCHNL_VERSION_MINOR 1 +#define VIRTCHNL_VERSION_MINOR_NO_VF_CAPS 0 + +struct virtchnl_version_info { + u32 major; + u32 minor; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_version_info); + +#define VF_IS_V10(_v) (((_v)->major == 1) && ((_v)->minor == 0)) +#define VF_IS_V11(_ver) (((_ver)->major == 1) && ((_ver)->minor == 1)) + +/* VIRTCHNL_OP_RESET_VF + * VF sends this request to PF with no parameters + * PF does NOT respond! VF driver must delay then poll VFGEN_RSTAT register + * until reset completion is indicated. The admin queue must be reinitialized + * after this operation. + * + * When reset is complete, PF must ensure that all queues in all VSIs associated + * with the VF are stopped, all queue configurations in the HMC are set to 0, + * and all MAC and VLAN filters (except the default MAC address) on all VSIs + * are cleared. + */ + +/* VSI types that use VIRTCHNL interface for VF-PF communication. VSI_SRIOV + * vsi_type should always be 6 for backward compatibility. Add other fields + * as needed. + */ +enum virtchnl_vsi_type { + VIRTCHNL_VSI_TYPE_INVALID = 0, + VIRTCHNL_VSI_SRIOV = 6, +}; + +/* VIRTCHNL_OP_GET_VF_RESOURCES + * Version 1.0 VF sends this request to PF with no parameters + * Version 1.1 VF sends this request to PF with u32 bitmap of its capabilities + * PF responds with an indirect message containing + * virtchnl_vf_resource and one or more + * virtchnl_vsi_resource structures. + */ + +struct virtchnl_vsi_resource { + u16 vsi_id; + u16 num_queue_pairs; + + /* see enum virtchnl_vsi_type */ + s32 vsi_type; + u16 qset_handle; + u8 default_mac_addr[ETH_ALEN]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vsi_resource); + +/* VF capability flags + * VIRTCHNL_VF_OFFLOAD_L2 flag is inclusive of base mode L2 offloads including + * TX/RX Checksum offloading and TSO for non-tunnelled packets. + */ +#define VIRTCHNL_VF_OFFLOAD_L2 BIT(0) +#define VIRTCHNL_VF_OFFLOAD_RDMA BIT(1) +#define VIRTCHNL_VF_CAP_RDMA VIRTCHNL_VF_OFFLOAD_RDMA +#define VIRTCHNL_VF_OFFLOAD_RSS_AQ BIT(3) +#define VIRTCHNL_VF_OFFLOAD_RSS_REG BIT(4) +#define VIRTCHNL_VF_OFFLOAD_WB_ON_ITR BIT(5) +#define VIRTCHNL_VF_OFFLOAD_REQ_QUEUES BIT(6) +/* used to negotiate communicating link speeds in Mbps */ +#define VIRTCHNL_VF_CAP_ADV_LINK_SPEED BIT(7) +#define VIRTCHNL_VF_OFFLOAD_VLAN_V2 BIT(15) +#define VIRTCHNL_VF_OFFLOAD_VLAN BIT(16) +#define VIRTCHNL_VF_OFFLOAD_RX_POLLING BIT(17) +#define VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2 BIT(18) +#define VIRTCHNL_VF_OFFLOAD_RSS_PF BIT(19) +#define VIRTCHNL_VF_OFFLOAD_ENCAP BIT(20) +#define VIRTCHNL_VF_OFFLOAD_ENCAP_CSUM BIT(21) +#define VIRTCHNL_VF_OFFLOAD_RX_ENCAP_CSUM BIT(22) +#define VIRTCHNL_VF_OFFLOAD_ADQ BIT(23) +#define VIRTCHNL_VF_OFFLOAD_USO BIT(25) +#define VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC BIT(26) +#define VIRTCHNL_VF_OFFLOAD_ADV_RSS_PF BIT(27) +#define VIRTCHNL_VF_OFFLOAD_FDIR_PF BIT(28) + +#define VF_BASE_MODE_OFFLOADS (VIRTCHNL_VF_OFFLOAD_L2 | \ + VIRTCHNL_VF_OFFLOAD_VLAN | \ + VIRTCHNL_VF_OFFLOAD_RSS_PF) + +struct virtchnl_vf_resource { + u16 num_vsis; + u16 num_queue_pairs; + u16 max_vectors; + u16 max_mtu; + + u32 vf_cap_flags; + u32 rss_key_size; + u32 rss_lut_size; + + struct virtchnl_vsi_resource vsi_res[]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(20, virtchnl_vf_resource); +#define virtchnl_vf_resource_LEGACY_SIZEOF 36 + +/* VIRTCHNL_OP_CONFIG_TX_QUEUE + * VF sends this message to set up parameters for one TX queue. + * External data buffer contains one instance of virtchnl_txq_info. + * PF configures requested queue and returns a status code. + */ + +/* Tx queue config info */ +struct virtchnl_txq_info { + u16 vsi_id; + u16 queue_id; + u16 ring_len; /* number of descriptors, multiple of 8 */ + u16 headwb_enabled; /* deprecated with AVF 1.0 */ + u64 dma_ring_addr; + u64 dma_headwb_addr; /* deprecated with AVF 1.0 */ +}; + +VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_txq_info); + +/* VIRTCHNL_OP_CONFIG_RX_QUEUE + * VF sends this message to set up parameters for one RX queue. + * External data buffer contains one instance of virtchnl_rxq_info. + * PF configures requested queue and returns a status code. + */ + +/* Rx queue config info */ +struct virtchnl_rxq_info { + u16 vsi_id; + u16 queue_id; + u32 ring_len; /* number of descriptors, multiple of 32 */ + u16 hdr_size; + u16 splithdr_enabled; /* deprecated with AVF 1.0 */ + u32 databuffer_size; + u32 max_pkt_size; + u8 pad0; + u8 rxdid; + u8 pad1[2]; + u64 dma_ring_addr; + + /* see enum virtchnl_rx_hsplit; deprecated with AVF 1.0 */ + s32 rx_split_pos; + u32 pad2; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_rxq_info); + +/* VIRTCHNL_OP_CONFIG_VSI_QUEUES + * VF sends this message to set parameters for all active TX and RX queues + * associated with the specified VSI. + * PF configures queues and returns status. + * If the number of queues specified is greater than the number of queues + * associated with the VSI, an error is returned and no queues are configured. + * NOTE: The VF is not required to configure all queues in a single request. + * It may send multiple messages. PF drivers must correctly handle all VF + * requests. + */ +struct virtchnl_queue_pair_info { + /* NOTE: vsi_id and queue_id should be identical for both queues. */ + struct virtchnl_txq_info txq; + struct virtchnl_rxq_info rxq; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(64, virtchnl_queue_pair_info); + +struct virtchnl_vsi_queue_config_info { + u16 vsi_id; + u16 num_queue_pairs; + u32 pad; + struct virtchnl_queue_pair_info qpair[]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_vsi_queue_config_info); +#define virtchnl_vsi_queue_config_info_LEGACY_SIZEOF 72 + +/* VIRTCHNL_OP_REQUEST_QUEUES + * VF sends this message to request the PF to allocate additional queues to + * this VF. Each VF gets a guaranteed number of queues on init but asking for + * additional queues must be negotiated. This is a best effort request as it + * is possible the PF does not have enough queues left to support the request. + * If the PF cannot support the number requested it will respond with the + * maximum number it is able to support. If the request is successful, PF will + * then reset the VF to institute required changes. + */ + +/* VF resource request */ +struct virtchnl_vf_res_request { + u16 num_queue_pairs; +}; + +/* VIRTCHNL_OP_CONFIG_IRQ_MAP + * VF uses this message to map vectors to queues. + * The rxq_map and txq_map fields are bitmaps used to indicate which queues + * are to be associated with the specified vector. + * The "other" causes are always mapped to vector 0. The VF may not request + * that vector 0 be used for traffic. + * PF configures interrupt mapping and returns status. + * NOTE: due to hardware requirements, all active queues (both TX and RX) + * should be mapped to interrupts, even if the driver intends to operate + * only in polling mode. In this case the interrupt may be disabled, but + * the ITR timer will still run to trigger writebacks. + */ +struct virtchnl_vector_map { + u16 vsi_id; + u16 vector_id; + u16 rxq_map; + u16 txq_map; + u16 rxitr_idx; + u16 txitr_idx; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_vector_map); + +struct virtchnl_irq_map_info { + u16 num_vectors; + struct virtchnl_vector_map vecmap[]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(2, virtchnl_irq_map_info); +#define virtchnl_irq_map_info_LEGACY_SIZEOF 14 + +/* VIRTCHNL_OP_ENABLE_QUEUES + * VIRTCHNL_OP_DISABLE_QUEUES + * VF sends these message to enable or disable TX/RX queue pairs. + * The queues fields are bitmaps indicating which queues to act upon. + * (Currently, we only support 16 queues per VF, but we make the field + * u32 to allow for expansion.) + * PF performs requested action and returns status. + * NOTE: The VF is not required to enable/disable all queues in a single + * request. It may send multiple messages. + * PF drivers must correctly handle all VF requests. + */ +struct virtchnl_queue_select { + u16 vsi_id; + u16 pad; + u32 rx_queues; + u32 tx_queues; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_queue_select); + +/* VIRTCHNL_OP_ADD_ETH_ADDR + * VF sends this message in order to add one or more unicast or multicast + * address filters for the specified VSI. + * PF adds the filters and returns status. + */ + +/* VIRTCHNL_OP_DEL_ETH_ADDR + * VF sends this message in order to remove one or more unicast or multicast + * filters for the specified VSI. + * PF removes the filters and returns status. + */ + +/* VIRTCHNL_ETHER_ADDR_LEGACY + * Prior to adding the @type member to virtchnl_ether_addr, there were 2 pad + * bytes. Moving forward all VF drivers should not set type to + * VIRTCHNL_ETHER_ADDR_LEGACY. This is only here to not break previous/legacy + * behavior. The control plane function (i.e. PF) can use a best effort method + * of tracking the primary/device unicast in this case, but there is no + * guarantee and functionality depends on the implementation of the PF. + */ + +/* VIRTCHNL_ETHER_ADDR_PRIMARY + * All VF drivers should set @type to VIRTCHNL_ETHER_ADDR_PRIMARY for the + * primary/device unicast MAC address filter for VIRTCHNL_OP_ADD_ETH_ADDR and + * VIRTCHNL_OP_DEL_ETH_ADDR. This allows for the underlying control plane + * function (i.e. PF) to accurately track and use this MAC address for + * displaying on the host and for VM/function reset. + */ + +/* VIRTCHNL_ETHER_ADDR_EXTRA + * All VF drivers should set @type to VIRTCHNL_ETHER_ADDR_EXTRA for any extra + * unicast and/or multicast filters that are being added/deleted via + * VIRTCHNL_OP_DEL_ETH_ADDR/VIRTCHNL_OP_ADD_ETH_ADDR respectively. + */ +struct virtchnl_ether_addr { + u8 addr[ETH_ALEN]; + u8 type; +#define VIRTCHNL_ETHER_ADDR_LEGACY 0 +#define VIRTCHNL_ETHER_ADDR_PRIMARY 1 +#define VIRTCHNL_ETHER_ADDR_EXTRA 2 +#define VIRTCHNL_ETHER_ADDR_TYPE_MASK 3 /* first two bits of type are valid */ + u8 pad; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_ether_addr); + +struct virtchnl_ether_addr_list { + u16 vsi_id; + u16 num_elements; + struct virtchnl_ether_addr list[]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(4, virtchnl_ether_addr_list); +#define virtchnl_ether_addr_list_LEGACY_SIZEOF 12 + +/* VIRTCHNL_OP_ADD_VLAN + * VF sends this message to add one or more VLAN tag filters for receives. + * PF adds the filters and returns status. + * If a port VLAN is configured by the PF, this operation will return an + * error to the VF. + */ + +/* VIRTCHNL_OP_DEL_VLAN + * VF sends this message to remove one or more VLAN tag filters for receives. + * PF removes the filters and returns status. + * If a port VLAN is configured by the PF, this operation will return an + * error to the VF. + */ + +struct virtchnl_vlan_filter_list { + u16 vsi_id; + u16 num_elements; + u16 vlan_id[]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(4, virtchnl_vlan_filter_list); +#define virtchnl_vlan_filter_list_LEGACY_SIZEOF 6 + +/* This enum is used for all of the VIRTCHNL_VF_OFFLOAD_VLAN_V2_CAPS related + * structures and opcodes. + * + * VIRTCHNL_VLAN_UNSUPPORTED - This field is not supported and if a VF driver + * populates it the PF should return VIRTCHNL_STATUS_ERR_NOT_SUPPORTED. + * + * VIRTCHNL_VLAN_ETHERTYPE_8100 - This field supports 0x8100 ethertype. + * VIRTCHNL_VLAN_ETHERTYPE_88A8 - This field supports 0x88A8 ethertype. + * VIRTCHNL_VLAN_ETHERTYPE_9100 - This field supports 0x9100 ethertype. + * + * VIRTCHNL_VLAN_ETHERTYPE_AND - Used when multiple ethertypes can be supported + * by the PF concurrently. For example, if the PF can support + * VIRTCHNL_VLAN_ETHERTYPE_8100 AND VIRTCHNL_VLAN_ETHERTYPE_88A8 filters it + * would OR the following bits: + * + * VIRTHCNL_VLAN_ETHERTYPE_8100 | + * VIRTCHNL_VLAN_ETHERTYPE_88A8 | + * VIRTCHNL_VLAN_ETHERTYPE_AND; + * + * The VF would interpret this as VLAN filtering can be supported on both 0x8100 + * and 0x88A8 VLAN ethertypes. + * + * VIRTCHNL_ETHERTYPE_XOR - Used when only a single ethertype can be supported + * by the PF concurrently. For example if the PF can support + * VIRTCHNL_VLAN_ETHERTYPE_8100 XOR VIRTCHNL_VLAN_ETHERTYPE_88A8 stripping + * offload it would OR the following bits: + * + * VIRTCHNL_VLAN_ETHERTYPE_8100 | + * VIRTCHNL_VLAN_ETHERTYPE_88A8 | + * VIRTCHNL_VLAN_ETHERTYPE_XOR; + * + * The VF would interpret this as VLAN stripping can be supported on either + * 0x8100 or 0x88a8 VLAN ethertypes. So when requesting VLAN stripping via + * VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 the specified ethertype will override + * the previously set value. + * + * VIRTCHNL_VLAN_TAG_LOCATION_L2TAG1 - Used to tell the VF to insert and/or + * strip the VLAN tag using the L2TAG1 field of the Tx/Rx descriptors. + * + * VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2 - Used to tell the VF to insert hardware + * offloaded VLAN tags using the L2TAG2 field of the Tx descriptor. + * + * VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2 - Used to tell the VF to strip hardware + * offloaded VLAN tags using the L2TAG2_2 field of the Rx descriptor. + * + * VIRTCHNL_VLAN_PRIO - This field supports VLAN priority bits. This is used for + * VLAN filtering if the underlying PF supports it. + * + * VIRTCHNL_VLAN_TOGGLE_ALLOWED - This field is used to say whether a + * certain VLAN capability can be toggled. For example if the underlying PF/CP + * allows the VF to toggle VLAN filtering, stripping, and/or insertion it should + * set this bit along with the supported ethertypes. + */ +enum virtchnl_vlan_support { + VIRTCHNL_VLAN_UNSUPPORTED = 0, + VIRTCHNL_VLAN_ETHERTYPE_8100 = BIT(0), + VIRTCHNL_VLAN_ETHERTYPE_88A8 = BIT(1), + VIRTCHNL_VLAN_ETHERTYPE_9100 = BIT(2), + VIRTCHNL_VLAN_TAG_LOCATION_L2TAG1 = BIT(8), + VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2 = BIT(9), + VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2_2 = BIT(10), + VIRTCHNL_VLAN_PRIO = BIT(24), + VIRTCHNL_VLAN_FILTER_MASK = BIT(28), + VIRTCHNL_VLAN_ETHERTYPE_AND = BIT(29), + VIRTCHNL_VLAN_ETHERTYPE_XOR = BIT(30), + VIRTCHNL_VLAN_TOGGLE = BIT(31), +}; + +/* This structure is used as part of the VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS + * for filtering, insertion, and stripping capabilities. + * + * If only outer capabilities are supported (for filtering, insertion, and/or + * stripping) then this refers to the outer most or single VLAN from the VF's + * perspective. + * + * If only inner capabilities are supported (for filtering, insertion, and/or + * stripping) then this refers to the outer most or single VLAN from the VF's + * perspective. Functionally this is the same as if only outer capabilities are + * supported. The VF driver is just forced to use the inner fields when + * adding/deleting filters and enabling/disabling offloads (if supported). + * + * If both outer and inner capabilities are supported (for filtering, insertion, + * and/or stripping) then outer refers to the outer most or single VLAN and + * inner refers to the second VLAN, if it exists, in the packet. + * + * There is no support for tunneled VLAN offloads, so outer or inner are never + * referring to a tunneled packet from the VF's perspective. + */ +struct virtchnl_vlan_supported_caps { + u32 outer; + u32 inner; +}; + +/* The PF populates these fields based on the supported VLAN filtering. If a + * field is VIRTCHNL_VLAN_UNSUPPORTED then it's not supported and the PF will + * reject any VIRTCHNL_OP_ADD_VLAN_V2 or VIRTCHNL_OP_DEL_VLAN_V2 messages using + * the unsupported fields. + * + * Also, a VF is only allowed to toggle its VLAN filtering setting if the + * VIRTCHNL_VLAN_TOGGLE bit is set. + * + * The ethertype(s) specified in the ethertype_init field are the ethertypes + * enabled for VLAN filtering. VLAN filtering in this case refers to the outer + * most VLAN from the VF's perspective. If both inner and outer filtering are + * allowed then ethertype_init only refers to the outer most VLAN as only + * VLAN ethertype supported for inner VLAN filtering is + * VIRTCHNL_VLAN_ETHERTYPE_8100. By default, inner VLAN filtering is disabled + * when both inner and outer filtering are allowed. + * + * The max_filters field tells the VF how many VLAN filters it's allowed to have + * at any one time. If it exceeds this amount and tries to add another filter, + * then the request will be rejected by the PF. To prevent failures, the VF + * should keep track of how many VLAN filters it has added and not attempt to + * add more than max_filters. + */ +struct virtchnl_vlan_filtering_caps { + struct virtchnl_vlan_supported_caps filtering_support; + u32 ethertype_init; + u16 max_filters; + u8 pad[2]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vlan_filtering_caps); + +/* This enum is used for the virtchnl_vlan_offload_caps structure to specify + * if the PF supports a different ethertype for stripping and insertion. + * + * VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION - The ethertype(s) specified + * for stripping affect the ethertype(s) specified for insertion and visa versa + * as well. If the VF tries to configure VLAN stripping via + * VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 with VIRTCHNL_VLAN_ETHERTYPE_8100 then + * that will be the ethertype for both stripping and insertion. + * + * VIRTCHNL_ETHERTYPE_MATCH_NOT_REQUIRED - The ethertype(s) specified for + * stripping do not affect the ethertype(s) specified for insertion and visa + * versa. + */ +enum virtchnl_vlan_ethertype_match { + VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION = 0, + VIRTCHNL_ETHERTYPE_MATCH_NOT_REQUIRED = 1, +}; + +/* The PF populates these fields based on the supported VLAN offloads. If a + * field is VIRTCHNL_VLAN_UNSUPPORTED then it's not supported and the PF will + * reject any VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 or + * VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2 messages using the unsupported fields. + * + * Also, a VF is only allowed to toggle its VLAN offload setting if the + * VIRTCHNL_VLAN_TOGGLE_ALLOWED bit is set. + * + * The VF driver needs to be aware of how the tags are stripped by hardware and + * inserted by the VF driver based on the level of offload support. The PF will + * populate these fields based on where the VLAN tags are expected to be + * offloaded via the VIRTHCNL_VLAN_TAG_LOCATION_* bits. The VF will need to + * interpret these fields. See the definition of the + * VIRTCHNL_VLAN_TAG_LOCATION_* bits above the virtchnl_vlan_support + * enumeration. + */ +struct virtchnl_vlan_offload_caps { + struct virtchnl_vlan_supported_caps stripping_support; + struct virtchnl_vlan_supported_caps insertion_support; + u32 ethertype_init; + u8 ethertype_match; + u8 pad[3]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_vlan_offload_caps); + +/* VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS + * VF sends this message to determine its VLAN capabilities. + * + * PF will mark which capabilities it supports based on hardware support and + * current configuration. For example, if a port VLAN is configured the PF will + * not allow outer VLAN filtering, stripping, or insertion to be configured so + * it will block these features from the VF. + * + * The VF will need to cross reference its capabilities with the PFs + * capabilities in the response message from the PF to determine the VLAN + * support. + */ +struct virtchnl_vlan_caps { + struct virtchnl_vlan_filtering_caps filtering; + struct virtchnl_vlan_offload_caps offloads; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_vlan_caps); + +struct virtchnl_vlan { + u16 tci; /* tci[15:13] = PCP and tci[11:0] = VID */ + u16 tci_mask; /* only valid if VIRTCHNL_VLAN_FILTER_MASK set in + * filtering caps + */ + u16 tpid; /* 0x8100, 0x88a8, etc. and only type(s) set in + * filtering caps. Note that tpid here does not refer to + * VIRTCHNL_VLAN_ETHERTYPE_*, but it refers to the + * actual 2-byte VLAN TPID + */ + u8 pad[2]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_vlan); + +struct virtchnl_vlan_filter { + struct virtchnl_vlan inner; + struct virtchnl_vlan outer; + u8 pad[16]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(32, virtchnl_vlan_filter); + +/* VIRTCHNL_OP_ADD_VLAN_V2 + * VIRTCHNL_OP_DEL_VLAN_V2 + * + * VF sends these messages to add/del one or more VLAN tag filters for Rx + * traffic. + * + * The PF attempts to add the filters and returns status. + * + * The VF should only ever attempt to add/del virtchnl_vlan_filter(s) using the + * supported fields negotiated via VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS. + */ +struct virtchnl_vlan_filter_list_v2 { + u16 vport_id; + u16 num_elements; + u8 pad[4]; + struct virtchnl_vlan_filter filters[]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_vlan_filter_list_v2); +#define virtchnl_vlan_filter_list_v2_LEGACY_SIZEOF 40 + +/* VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 + * VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2 + * VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2 + * VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2 + * + * VF sends this message to enable or disable VLAN stripping or insertion. It + * also needs to specify an ethertype. The VF knows which VLAN ethertypes are + * allowed and whether or not it's allowed to enable/disable the specific + * offload via the VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS message. The VF needs to + * parse the virtchnl_vlan_caps.offloads fields to determine which offload + * messages are allowed. + * + * For example, if the PF populates the virtchnl_vlan_caps.offloads in the + * following manner the VF will be allowed to enable and/or disable 0x8100 inner + * VLAN insertion and/or stripping via the opcodes listed above. Inner in this + * case means the outer most or single VLAN from the VF's perspective. This is + * because no outer offloads are supported. See the comments above the + * virtchnl_vlan_supported_caps structure for more details. + * + * virtchnl_vlan_caps.offloads.stripping_support.inner = + * VIRTCHNL_VLAN_TOGGLE | + * VIRTCHNL_VLAN_ETHERTYPE_8100; + * + * virtchnl_vlan_caps.offloads.insertion_support.inner = + * VIRTCHNL_VLAN_TOGGLE | + * VIRTCHNL_VLAN_ETHERTYPE_8100; + * + * In order to enable inner (again note that in this case inner is the outer + * most or single VLAN from the VF's perspective) VLAN stripping for 0x8100 + * VLANs, the VF would populate the virtchnl_vlan_setting structure in the + * following manner and send the VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 message. + * + * virtchnl_vlan_setting.inner_ethertype_setting = + * VIRTCHNL_VLAN_ETHERTYPE_8100; + * + * virtchnl_vlan_setting.vport_id = vport_id or vsi_id assigned to the VF on + * initialization. + * + * The reason that VLAN TPID(s) are not being used for the + * outer_ethertype_setting and inner_ethertype_setting fields is because it's + * possible a device could support VLAN insertion and/or stripping offload on + * multiple ethertypes concurrently, so this method allows a VF to request + * multiple ethertypes in one message using the virtchnl_vlan_support + * enumeration. + * + * For example, if the PF populates the virtchnl_vlan_caps.offloads in the + * following manner the VF will be allowed to enable 0x8100 and 0x88a8 outer + * VLAN insertion and stripping simultaneously. The + * virtchnl_vlan_caps.offloads.ethertype_match field will also have to be + * populated based on what the PF can support. + * + * virtchnl_vlan_caps.offloads.stripping_support.outer = + * VIRTCHNL_VLAN_TOGGLE | + * VIRTCHNL_VLAN_ETHERTYPE_8100 | + * VIRTCHNL_VLAN_ETHERTYPE_88A8 | + * VIRTCHNL_VLAN_ETHERTYPE_AND; + * + * virtchnl_vlan_caps.offloads.insertion_support.outer = + * VIRTCHNL_VLAN_TOGGLE | + * VIRTCHNL_VLAN_ETHERTYPE_8100 | + * VIRTCHNL_VLAN_ETHERTYPE_88A8 | + * VIRTCHNL_VLAN_ETHERTYPE_AND; + * + * In order to enable outer VLAN stripping for 0x8100 and 0x88a8 VLANs, the VF + * would populate the virthcnl_vlan_offload_structure in the following manner + * and send the VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 message. + * + * virtchnl_vlan_setting.outer_ethertype_setting = + * VIRTHCNL_VLAN_ETHERTYPE_8100 | + * VIRTHCNL_VLAN_ETHERTYPE_88A8; + * + * virtchnl_vlan_setting.vport_id = vport_id or vsi_id assigned to the VF on + * initialization. + * + * There is also the case where a PF and the underlying hardware can support + * VLAN offloads on multiple ethertypes, but not concurrently. For example, if + * the PF populates the virtchnl_vlan_caps.offloads in the following manner the + * VF will be allowed to enable and/or disable 0x8100 XOR 0x88a8 outer VLAN + * offloads. The ethertypes must match for stripping and insertion. + * + * virtchnl_vlan_caps.offloads.stripping_support.outer = + * VIRTCHNL_VLAN_TOGGLE | + * VIRTCHNL_VLAN_ETHERTYPE_8100 | + * VIRTCHNL_VLAN_ETHERTYPE_88A8 | + * VIRTCHNL_VLAN_ETHERTYPE_XOR; + * + * virtchnl_vlan_caps.offloads.insertion_support.outer = + * VIRTCHNL_VLAN_TOGGLE | + * VIRTCHNL_VLAN_ETHERTYPE_8100 | + * VIRTCHNL_VLAN_ETHERTYPE_88A8 | + * VIRTCHNL_VLAN_ETHERTYPE_XOR; + * + * virtchnl_vlan_caps.offloads.ethertype_match = + * VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION; + * + * In order to enable outer VLAN stripping for 0x88a8 VLANs, the VF would + * populate the virtchnl_vlan_setting structure in the following manner and send + * the VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2. Also, this will change the + * ethertype for VLAN insertion if it's enabled. So, for completeness, a + * VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2 with the same ethertype should be sent. + * + * virtchnl_vlan_setting.outer_ethertype_setting = VIRTHCNL_VLAN_ETHERTYPE_88A8; + * + * virtchnl_vlan_setting.vport_id = vport_id or vsi_id assigned to the VF on + * initialization. + */ +struct virtchnl_vlan_setting { + u32 outer_ethertype_setting; + u32 inner_ethertype_setting; + u16 vport_id; + u8 pad[6]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vlan_setting); + +/* VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE + * VF sends VSI id and flags. + * PF returns status code in retval. + * Note: we assume that broadcast accept mode is always enabled. + */ +struct virtchnl_promisc_info { + u16 vsi_id; + u16 flags; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(4, virtchnl_promisc_info); + +#define FLAG_VF_UNICAST_PROMISC 0x00000001 +#define FLAG_VF_MULTICAST_PROMISC 0x00000002 + +/* VIRTCHNL_OP_GET_STATS + * VF sends this message to request stats for the selected VSI. VF uses + * the virtchnl_queue_select struct to specify the VSI. The queue_id + * field is ignored by the PF. + * + * PF replies with struct eth_stats in an external buffer. + */ + +/* VIRTCHNL_OP_CONFIG_RSS_KEY + * VIRTCHNL_OP_CONFIG_RSS_LUT + * VF sends these messages to configure RSS. Only supported if both PF + * and VF drivers set the VIRTCHNL_VF_OFFLOAD_RSS_PF bit during + * configuration negotiation. If this is the case, then the RSS fields in + * the VF resource struct are valid. + * Both the key and LUT are initialized to 0 by the PF, meaning that + * RSS is effectively disabled until set up by the VF. + */ +struct virtchnl_rss_key { + u16 vsi_id; + u16 key_len; + u8 key[]; /* RSS hash key, packed bytes */ +}; + +VIRTCHNL_CHECK_STRUCT_LEN(4, virtchnl_rss_key); +#define virtchnl_rss_key_LEGACY_SIZEOF 6 + +struct virtchnl_rss_lut { + u16 vsi_id; + u16 lut_entries; + u8 lut[]; /* RSS lookup table */ +}; + +VIRTCHNL_CHECK_STRUCT_LEN(4, virtchnl_rss_lut); +#define virtchnl_rss_lut_LEGACY_SIZEOF 6 + +/* VIRTCHNL_OP_GET_RSS_HENA_CAPS + * VIRTCHNL_OP_SET_RSS_HENA + * VF sends these messages to get and set the hash filter enable bits for RSS. + * By default, the PF sets these to all possible traffic types that the + * hardware supports. The VF can query this value if it wants to change the + * traffic types that are hashed by the hardware. + */ +struct virtchnl_rss_hena { + u64 hena; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_rss_hena); + +/* VIRTCHNL_OP_ENABLE_CHANNELS + * VIRTCHNL_OP_DISABLE_CHANNELS + * VF sends these messages to enable or disable channels based on + * the user specified queue count and queue offset for each traffic class. + * This struct encompasses all the information that the PF needs from + * VF to create a channel. + */ +struct virtchnl_channel_info { + u16 count; /* number of queues in a channel */ + u16 offset; /* queues in a channel start from 'offset' */ + u32 pad; + u64 max_tx_rate; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_channel_info); + +struct virtchnl_tc_info { + u32 num_tc; + u32 pad; + struct virtchnl_channel_info list[]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_tc_info); +#define virtchnl_tc_info_LEGACY_SIZEOF 24 + +/* VIRTCHNL_ADD_CLOUD_FILTER + * VIRTCHNL_DEL_CLOUD_FILTER + * VF sends these messages to add or delete a cloud filter based on the + * user specified match and action filters. These structures encompass + * all the information that the PF needs from the VF to add/delete a + * cloud filter. + */ + +struct virtchnl_l4_spec { + u8 src_mac[ETH_ALEN]; + u8 dst_mac[ETH_ALEN]; + __be16 vlan_id; + __be16 pad; /* reserved for future use */ + __be32 src_ip[4]; + __be32 dst_ip[4]; + __be16 src_port; + __be16 dst_port; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(52, virtchnl_l4_spec); + +union virtchnl_flow_spec { + struct virtchnl_l4_spec tcp_spec; + u8 buffer[128]; /* reserved for future use */ +}; + +VIRTCHNL_CHECK_UNION_LEN(128, virtchnl_flow_spec); + +enum virtchnl_action { + /* action types */ + VIRTCHNL_ACTION_DROP = 0, + VIRTCHNL_ACTION_TC_REDIRECT, + VIRTCHNL_ACTION_PASSTHRU, + VIRTCHNL_ACTION_QUEUE, + VIRTCHNL_ACTION_Q_REGION, + VIRTCHNL_ACTION_MARK, + VIRTCHNL_ACTION_COUNT, +}; + +enum virtchnl_flow_type { + /* flow types */ + VIRTCHNL_TCP_V4_FLOW = 0, + VIRTCHNL_TCP_V6_FLOW, +}; + +struct virtchnl_filter { + union virtchnl_flow_spec data; + union virtchnl_flow_spec mask; + + /* see enum virtchnl_flow_type */ + s32 flow_type; + + /* see enum virtchnl_action */ + s32 action; + u32 action_meta; + u8 field_flags; + u8 pad[3]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(272, virtchnl_filter); + +struct virtchnl_supported_rxdids { + u64 supported_rxdids; +}; + +/* VIRTCHNL_OP_EVENT + * PF sends this message to inform the VF driver of events that may affect it. + * No direct response is expected from the VF, though it may generate other + * messages in response to this one. + */ +enum virtchnl_event_codes { + VIRTCHNL_EVENT_UNKNOWN = 0, + VIRTCHNL_EVENT_LINK_CHANGE, + VIRTCHNL_EVENT_RESET_IMPENDING, + VIRTCHNL_EVENT_PF_DRIVER_CLOSE, +}; + +#define PF_EVENT_SEVERITY_INFO 0 +#define PF_EVENT_SEVERITY_CERTAIN_DOOM 255 + +struct virtchnl_pf_event { + /* see enum virtchnl_event_codes */ + s32 event; + union { + /* If the PF driver does not support the new speed reporting + * capabilities then use link_event else use link_event_adv to + * get the speed and link information. The ability to understand + * new speeds is indicated by setting the capability flag + * VIRTCHNL_VF_CAP_ADV_LINK_SPEED in vf_cap_flags parameter + * in virtchnl_vf_resource struct and can be used to determine + * which link event struct to use below. + */ + struct { + enum virtchnl_link_speed link_speed; + bool link_status; + u8 pad[3]; + } link_event; + struct { + /* link_speed provided in Mbps */ + u32 link_speed; + u8 link_status; + u8 pad[3]; + } link_event_adv; + } event_data; + + s32 severity; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_pf_event); + +/* used to specify if a ceq_idx or aeq_idx is invalid */ +#define VIRTCHNL_RDMA_INVALID_QUEUE_IDX 0xFFFF +/* VIRTCHNL_OP_CONFIG_RDMA_IRQ_MAP + * VF uses this message to request PF to map RDMA vectors to RDMA queues. + * The request for this originates from the VF RDMA driver through + * a client interface between VF LAN and VF RDMA driver. + * A vector could have an AEQ and CEQ attached to it although + * there is a single AEQ per VF RDMA instance in which case + * most vectors will have an VIRTCHNL_RDMA_INVALID_QUEUE_IDX for aeq and valid + * idx for ceqs There will never be a case where there will be multiple CEQs + * attached to a single vector. + * PF configures interrupt mapping and returns status. + */ + +struct virtchnl_rdma_qv_info { + u32 v_idx; /* msix_vector */ + u16 ceq_idx; /* set to VIRTCHNL_RDMA_INVALID_QUEUE_IDX if invalid */ + u16 aeq_idx; /* set to VIRTCHNL_RDMA_INVALID_QUEUE_IDX if invalid */ + u8 itr_idx; + u8 pad[3]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_rdma_qv_info); + +struct virtchnl_rdma_qvlist_info { + u32 num_vectors; + struct virtchnl_rdma_qv_info qv_info[]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(4, virtchnl_rdma_qvlist_info); +#define virtchnl_rdma_qvlist_info_LEGACY_SIZEOF 16 + +/* VF reset states - these are written into the RSTAT register: + * VFGEN_RSTAT on the VF + * When the PF initiates a reset, it writes 0 + * When the reset is complete, it writes 1 + * When the PF detects that the VF has recovered, it writes 2 + * VF checks this register periodically to determine if a reset has occurred, + * then polls it to know when the reset is complete. + * If either the PF or VF reads the register while the hardware + * is in a reset state, it will return DEADBEEF, which, when masked + * will result in 3. + */ +enum virtchnl_vfr_states { + VIRTCHNL_VFR_INPROGRESS = 0, + VIRTCHNL_VFR_COMPLETED, + VIRTCHNL_VFR_VFACTIVE, +}; + +/* Type of RSS algorithm */ +enum virtchnl_rss_algorithm { + VIRTCHNL_RSS_ALG_TOEPLITZ_ASYMMETRIC = 0, + VIRTCHNL_RSS_ALG_R_ASYMMETRIC = 1, + VIRTCHNL_RSS_ALG_TOEPLITZ_SYMMETRIC = 2, + VIRTCHNL_RSS_ALG_XOR_SYMMETRIC = 3, +}; + +#define VIRTCHNL_MAX_NUM_PROTO_HDRS 32 +#define PROTO_HDR_SHIFT 5 +#define PROTO_HDR_FIELD_START(proto_hdr_type) ((proto_hdr_type) << PROTO_HDR_SHIFT) +#define PROTO_HDR_FIELD_MASK ((1UL << PROTO_HDR_SHIFT) - 1) + +/* VF use these macros to configure each protocol header. + * Specify which protocol headers and protocol header fields base on + * virtchnl_proto_hdr_type and virtchnl_proto_hdr_field. + * @param hdr: a struct of virtchnl_proto_hdr + * @param hdr_type: ETH/IPV4/TCP, etc + * @param field: SRC/DST/TEID/SPI, etc + */ +#define VIRTCHNL_ADD_PROTO_HDR_FIELD(hdr, field) \ + ((hdr)->field_selector |= BIT((field) & PROTO_HDR_FIELD_MASK)) +#define VIRTCHNL_DEL_PROTO_HDR_FIELD(hdr, field) \ + ((hdr)->field_selector &= ~BIT((field) & PROTO_HDR_FIELD_MASK)) +#define VIRTCHNL_TEST_PROTO_HDR_FIELD(hdr, val) \ + ((hdr)->field_selector & BIT((val) & PROTO_HDR_FIELD_MASK)) +#define VIRTCHNL_GET_PROTO_HDR_FIELD(hdr) ((hdr)->field_selector) + +#define VIRTCHNL_ADD_PROTO_HDR_FIELD_BIT(hdr, hdr_type, field) \ + (VIRTCHNL_ADD_PROTO_HDR_FIELD(hdr, \ + VIRTCHNL_PROTO_HDR_ ## hdr_type ## _ ## field)) +#define VIRTCHNL_DEL_PROTO_HDR_FIELD_BIT(hdr, hdr_type, field) \ + (VIRTCHNL_DEL_PROTO_HDR_FIELD(hdr, \ + VIRTCHNL_PROTO_HDR_ ## hdr_type ## _ ## field)) + +#define VIRTCHNL_SET_PROTO_HDR_TYPE(hdr, hdr_type) \ + ((hdr)->type = VIRTCHNL_PROTO_HDR_ ## hdr_type) +#define VIRTCHNL_GET_PROTO_HDR_TYPE(hdr) \ + (((hdr)->type) >> PROTO_HDR_SHIFT) +#define VIRTCHNL_TEST_PROTO_HDR_TYPE(hdr, val) \ + ((hdr)->type == ((s32)((val) >> PROTO_HDR_SHIFT))) +#define VIRTCHNL_TEST_PROTO_HDR(hdr, val) \ + (VIRTCHNL_TEST_PROTO_HDR_TYPE((hdr), (val)) && \ + VIRTCHNL_TEST_PROTO_HDR_FIELD((hdr), (val))) + +/* Protocol header type within a packet segment. A segment consists of one or + * more protocol headers that make up a logical group of protocol headers. Each + * logical group of protocol headers encapsulates or is encapsulated using/by + * tunneling or encapsulation protocols for network virtualization. + */ +enum virtchnl_proto_hdr_type { + VIRTCHNL_PROTO_HDR_NONE, + VIRTCHNL_PROTO_HDR_ETH, + VIRTCHNL_PROTO_HDR_S_VLAN, + VIRTCHNL_PROTO_HDR_C_VLAN, + VIRTCHNL_PROTO_HDR_IPV4, + VIRTCHNL_PROTO_HDR_IPV6, + VIRTCHNL_PROTO_HDR_TCP, + VIRTCHNL_PROTO_HDR_UDP, + VIRTCHNL_PROTO_HDR_SCTP, + VIRTCHNL_PROTO_HDR_GTPU_IP, + VIRTCHNL_PROTO_HDR_GTPU_EH, + VIRTCHNL_PROTO_HDR_GTPU_EH_PDU_DWN, + VIRTCHNL_PROTO_HDR_GTPU_EH_PDU_UP, + VIRTCHNL_PROTO_HDR_PPPOE, + VIRTCHNL_PROTO_HDR_L2TPV3, + VIRTCHNL_PROTO_HDR_ESP, + VIRTCHNL_PROTO_HDR_AH, + VIRTCHNL_PROTO_HDR_PFCP, +}; + +/* Protocol header field within a protocol header. */ +enum virtchnl_proto_hdr_field { + /* ETHER */ + VIRTCHNL_PROTO_HDR_ETH_SRC = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_ETH), + VIRTCHNL_PROTO_HDR_ETH_DST, + VIRTCHNL_PROTO_HDR_ETH_ETHERTYPE, + /* S-VLAN */ + VIRTCHNL_PROTO_HDR_S_VLAN_ID = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_S_VLAN), + /* C-VLAN */ + VIRTCHNL_PROTO_HDR_C_VLAN_ID = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_C_VLAN), + /* IPV4 */ + VIRTCHNL_PROTO_HDR_IPV4_SRC = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_IPV4), + VIRTCHNL_PROTO_HDR_IPV4_DST, + VIRTCHNL_PROTO_HDR_IPV4_DSCP, + VIRTCHNL_PROTO_HDR_IPV4_TTL, + VIRTCHNL_PROTO_HDR_IPV4_PROT, + /* IPV6 */ + VIRTCHNL_PROTO_HDR_IPV6_SRC = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_IPV6), + VIRTCHNL_PROTO_HDR_IPV6_DST, + VIRTCHNL_PROTO_HDR_IPV6_TC, + VIRTCHNL_PROTO_HDR_IPV6_HOP_LIMIT, + VIRTCHNL_PROTO_HDR_IPV6_PROT, + /* TCP */ + VIRTCHNL_PROTO_HDR_TCP_SRC_PORT = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_TCP), + VIRTCHNL_PROTO_HDR_TCP_DST_PORT, + /* UDP */ + VIRTCHNL_PROTO_HDR_UDP_SRC_PORT = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_UDP), + VIRTCHNL_PROTO_HDR_UDP_DST_PORT, + /* SCTP */ + VIRTCHNL_PROTO_HDR_SCTP_SRC_PORT = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_SCTP), + VIRTCHNL_PROTO_HDR_SCTP_DST_PORT, + /* GTPU_IP */ + VIRTCHNL_PROTO_HDR_GTPU_IP_TEID = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_GTPU_IP), + /* GTPU_EH */ + VIRTCHNL_PROTO_HDR_GTPU_EH_PDU = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_GTPU_EH), + VIRTCHNL_PROTO_HDR_GTPU_EH_QFI, + /* PPPOE */ + VIRTCHNL_PROTO_HDR_PPPOE_SESS_ID = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_PPPOE), + /* L2TPV3 */ + VIRTCHNL_PROTO_HDR_L2TPV3_SESS_ID = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_L2TPV3), + /* ESP */ + VIRTCHNL_PROTO_HDR_ESP_SPI = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_ESP), + /* AH */ + VIRTCHNL_PROTO_HDR_AH_SPI = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_AH), + /* PFCP */ + VIRTCHNL_PROTO_HDR_PFCP_S_FIELD = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_PFCP), + VIRTCHNL_PROTO_HDR_PFCP_SEID, +}; + +struct virtchnl_proto_hdr { + /* see enum virtchnl_proto_hdr_type */ + s32 type; + u32 field_selector; /* a bit mask to select field for header type */ + u8 buffer[64]; + /** + * binary buffer in network order for specific header type. + * For example, if type = VIRTCHNL_PROTO_HDR_IPV4, a IPv4 + * header is expected to be copied into the buffer. + */ +}; + +VIRTCHNL_CHECK_STRUCT_LEN(72, virtchnl_proto_hdr); + +struct virtchnl_proto_hdrs { + u8 tunnel_level; + u8 pad[3]; + /** + * specify where protocol header start from. + * 0 - from the outer layer + * 1 - from the first inner layer + * 2 - from the second inner layer + * .... + **/ + int count; /* the proto layers must < VIRTCHNL_MAX_NUM_PROTO_HDRS */ + struct virtchnl_proto_hdr proto_hdr[VIRTCHNL_MAX_NUM_PROTO_HDRS]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(2312, virtchnl_proto_hdrs); + +struct virtchnl_rss_cfg { + struct virtchnl_proto_hdrs proto_hdrs; /* protocol headers */ + + /* see enum virtchnl_rss_algorithm; rss algorithm type */ + s32 rss_algorithm; + u8 reserved[128]; /* reserve for future */ +}; + +VIRTCHNL_CHECK_STRUCT_LEN(2444, virtchnl_rss_cfg); + +/* action configuration for FDIR */ +struct virtchnl_filter_action { + /* see enum virtchnl_action type */ + s32 type; + union { + /* used for queue and qgroup action */ + struct { + u16 index; + u8 region; + } queue; + /* used for count action */ + struct { + /* share counter ID with other flow rules */ + u8 shared; + u32 id; /* counter ID */ + } count; + /* used for mark action */ + u32 mark_id; + u8 reserve[32]; + } act_conf; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(36, virtchnl_filter_action); + +#define VIRTCHNL_MAX_NUM_ACTIONS 8 + +struct virtchnl_filter_action_set { + /* action number must be less then VIRTCHNL_MAX_NUM_ACTIONS */ + int count; + struct virtchnl_filter_action actions[VIRTCHNL_MAX_NUM_ACTIONS]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(292, virtchnl_filter_action_set); + +/* pattern and action for FDIR rule */ +struct virtchnl_fdir_rule { + struct virtchnl_proto_hdrs proto_hdrs; + struct virtchnl_filter_action_set action_set; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(2604, virtchnl_fdir_rule); + +/* Status returned to VF after VF requests FDIR commands + * VIRTCHNL_FDIR_SUCCESS + * VF FDIR related request is successfully done by PF + * The request can be OP_ADD/DEL/QUERY_FDIR_FILTER. + * + * VIRTCHNL_FDIR_FAILURE_RULE_NORESOURCE + * OP_ADD_FDIR_FILTER request is failed due to no Hardware resource. + * + * VIRTCHNL_FDIR_FAILURE_RULE_EXIST + * OP_ADD_FDIR_FILTER request is failed due to the rule is already existed. + * + * VIRTCHNL_FDIR_FAILURE_RULE_CONFLICT + * OP_ADD_FDIR_FILTER request is failed due to conflict with existing rule. + * + * VIRTCHNL_FDIR_FAILURE_RULE_NONEXIST + * OP_DEL_FDIR_FILTER request is failed due to this rule doesn't exist. + * + * VIRTCHNL_FDIR_FAILURE_RULE_INVALID + * OP_ADD_FDIR_FILTER request is failed due to parameters validation + * or HW doesn't support. + * + * VIRTCHNL_FDIR_FAILURE_RULE_TIMEOUT + * OP_ADD/DEL_FDIR_FILTER request is failed due to timing out + * for programming. + * + * VIRTCHNL_FDIR_FAILURE_QUERY_INVALID + * OP_QUERY_FDIR_FILTER request is failed due to parameters validation, + * for example, VF query counter of a rule who has no counter action. + */ +enum virtchnl_fdir_prgm_status { + VIRTCHNL_FDIR_SUCCESS = 0, + VIRTCHNL_FDIR_FAILURE_RULE_NORESOURCE, + VIRTCHNL_FDIR_FAILURE_RULE_EXIST, + VIRTCHNL_FDIR_FAILURE_RULE_CONFLICT, + VIRTCHNL_FDIR_FAILURE_RULE_NONEXIST, + VIRTCHNL_FDIR_FAILURE_RULE_INVALID, + VIRTCHNL_FDIR_FAILURE_RULE_TIMEOUT, + VIRTCHNL_FDIR_FAILURE_QUERY_INVALID, +}; + +/* VIRTCHNL_OP_ADD_FDIR_FILTER + * VF sends this request to PF by filling out vsi_id, + * validate_only and rule_cfg. PF will return flow_id + * if the request is successfully done and return add_status to VF. + */ +struct virtchnl_fdir_add { + u16 vsi_id; /* INPUT */ + /* + * 1 for validating a fdir rule, 0 for creating a fdir rule. + * Validate and create share one ops: VIRTCHNL_OP_ADD_FDIR_FILTER. + */ + u16 validate_only; /* INPUT */ + u32 flow_id; /* OUTPUT */ + struct virtchnl_fdir_rule rule_cfg; /* INPUT */ + + /* see enum virtchnl_fdir_prgm_status; OUTPUT */ + s32 status; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(2616, virtchnl_fdir_add); + +/* VIRTCHNL_OP_DEL_FDIR_FILTER + * VF sends this request to PF by filling out vsi_id + * and flow_id. PF will return del_status to VF. + */ +struct virtchnl_fdir_del { + u16 vsi_id; /* INPUT */ + u16 pad; + u32 flow_id; /* INPUT */ + + /* see enum virtchnl_fdir_prgm_status; OUTPUT */ + s32 status; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_fdir_del); + +#define __vss_byone(p, member, count, old) \ + (struct_size(p, member, count) + (old - 1 - struct_size(p, member, 0))) + +#define __vss_byelem(p, member, count, old) \ + (struct_size(p, member, count - 1) + (old - struct_size(p, member, 0))) + +#define __vss_full(p, member, count, old) \ + (struct_size(p, member, count) + (old - struct_size(p, member, 0))) + +#define __vss(type, func, p, member, count) \ + struct type: func(p, member, count, type##_LEGACY_SIZEOF) + +#define virtchnl_struct_size(p, m, c) \ + _Generic(*p, \ + __vss(virtchnl_vf_resource, __vss_full, p, m, c), \ + __vss(virtchnl_vsi_queue_config_info, __vss_full, p, m, c), \ + __vss(virtchnl_irq_map_info, __vss_full, p, m, c), \ + __vss(virtchnl_ether_addr_list, __vss_full, p, m, c), \ + __vss(virtchnl_vlan_filter_list, __vss_full, p, m, c), \ + __vss(virtchnl_vlan_filter_list_v2, __vss_byelem, p, m, c), \ + __vss(virtchnl_tc_info, __vss_byelem, p, m, c), \ + __vss(virtchnl_rdma_qvlist_info, __vss_byelem, p, m, c), \ + __vss(virtchnl_rss_key, __vss_byone, p, m, c), \ + __vss(virtchnl_rss_lut, __vss_byone, p, m, c)) + +/** + * virtchnl_vc_validate_vf_msg + * @ver: Virtchnl version info + * @v_opcode: Opcode for the message + * @msg: pointer to the msg buffer + * @msglen: msg length + * + * validate msg format against struct for each opcode + */ +static inline int +virtchnl_vc_validate_vf_msg(struct virtchnl_version_info *ver, u32 v_opcode, + u8 *msg, u16 msglen) +{ + bool err_msg_format = false; + u32 valid_len = 0; + + /* Validate message length. */ + switch (v_opcode) { + case VIRTCHNL_OP_VERSION: + valid_len = sizeof(struct virtchnl_version_info); + break; + case VIRTCHNL_OP_RESET_VF: + break; + case VIRTCHNL_OP_GET_VF_RESOURCES: + if (VF_IS_V11(ver)) + valid_len = sizeof(u32); + break; + case VIRTCHNL_OP_CONFIG_TX_QUEUE: + valid_len = sizeof(struct virtchnl_txq_info); + break; + case VIRTCHNL_OP_CONFIG_RX_QUEUE: + valid_len = sizeof(struct virtchnl_rxq_info); + break; + case VIRTCHNL_OP_CONFIG_VSI_QUEUES: + valid_len = virtchnl_vsi_queue_config_info_LEGACY_SIZEOF; + if (msglen >= valid_len) { + struct virtchnl_vsi_queue_config_info *vqc = + (struct virtchnl_vsi_queue_config_info *)msg; + valid_len = virtchnl_struct_size(vqc, qpair, + vqc->num_queue_pairs); + if (vqc->num_queue_pairs == 0) + err_msg_format = true; + } + break; + case VIRTCHNL_OP_CONFIG_IRQ_MAP: + valid_len = virtchnl_irq_map_info_LEGACY_SIZEOF; + if (msglen >= valid_len) { + struct virtchnl_irq_map_info *vimi = + (struct virtchnl_irq_map_info *)msg; + valid_len = virtchnl_struct_size(vimi, vecmap, + vimi->num_vectors); + if (vimi->num_vectors == 0) + err_msg_format = true; + } + break; + case VIRTCHNL_OP_ENABLE_QUEUES: + case VIRTCHNL_OP_DISABLE_QUEUES: + valid_len = sizeof(struct virtchnl_queue_select); + break; + case VIRTCHNL_OP_ADD_ETH_ADDR: + case VIRTCHNL_OP_DEL_ETH_ADDR: + valid_len = virtchnl_ether_addr_list_LEGACY_SIZEOF; + if (msglen >= valid_len) { + struct virtchnl_ether_addr_list *veal = + (struct virtchnl_ether_addr_list *)msg; + valid_len = virtchnl_struct_size(veal, list, + veal->num_elements); + if (veal->num_elements == 0) + err_msg_format = true; + } + break; + case VIRTCHNL_OP_ADD_VLAN: + case VIRTCHNL_OP_DEL_VLAN: + valid_len = virtchnl_vlan_filter_list_LEGACY_SIZEOF; + if (msglen >= valid_len) { + struct virtchnl_vlan_filter_list *vfl = + (struct virtchnl_vlan_filter_list *)msg; + valid_len = virtchnl_struct_size(vfl, vlan_id, + vfl->num_elements); + if (vfl->num_elements == 0) + err_msg_format = true; + } + break; + case VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE: + valid_len = sizeof(struct virtchnl_promisc_info); + break; + case VIRTCHNL_OP_GET_STATS: + valid_len = sizeof(struct virtchnl_queue_select); + break; + case VIRTCHNL_OP_RDMA: + /* These messages are opaque to us and will be validated in + * the RDMA client code. We just need to check for nonzero + * length. The firmware will enforce max length restrictions. + */ + if (msglen) + valid_len = msglen; + else + err_msg_format = true; + break; + case VIRTCHNL_OP_RELEASE_RDMA_IRQ_MAP: + break; + case VIRTCHNL_OP_CONFIG_RDMA_IRQ_MAP: + valid_len = virtchnl_rdma_qvlist_info_LEGACY_SIZEOF; + if (msglen >= valid_len) { + struct virtchnl_rdma_qvlist_info *qv = + (struct virtchnl_rdma_qvlist_info *)msg; + + valid_len = virtchnl_struct_size(qv, qv_info, + qv->num_vectors); + } + break; + case VIRTCHNL_OP_CONFIG_RSS_KEY: + valid_len = virtchnl_rss_key_LEGACY_SIZEOF; + if (msglen >= valid_len) { + struct virtchnl_rss_key *vrk = + (struct virtchnl_rss_key *)msg; + valid_len = virtchnl_struct_size(vrk, key, + vrk->key_len); + } + break; + case VIRTCHNL_OP_CONFIG_RSS_LUT: + valid_len = virtchnl_rss_lut_LEGACY_SIZEOF; + if (msglen >= valid_len) { + struct virtchnl_rss_lut *vrl = + (struct virtchnl_rss_lut *)msg; + valid_len = virtchnl_struct_size(vrl, lut, + vrl->lut_entries); + } + break; + case VIRTCHNL_OP_GET_RSS_HENA_CAPS: + break; + case VIRTCHNL_OP_SET_RSS_HENA: + valid_len = sizeof(struct virtchnl_rss_hena); + break; + case VIRTCHNL_OP_ENABLE_VLAN_STRIPPING: + case VIRTCHNL_OP_DISABLE_VLAN_STRIPPING: + break; + case VIRTCHNL_OP_REQUEST_QUEUES: + valid_len = sizeof(struct virtchnl_vf_res_request); + break; + case VIRTCHNL_OP_ENABLE_CHANNELS: + valid_len = virtchnl_tc_info_LEGACY_SIZEOF; + if (msglen >= valid_len) { + struct virtchnl_tc_info *vti = + (struct virtchnl_tc_info *)msg; + valid_len = virtchnl_struct_size(vti, list, + vti->num_tc); + if (vti->num_tc == 0) + err_msg_format = true; + } + break; + case VIRTCHNL_OP_DISABLE_CHANNELS: + break; + case VIRTCHNL_OP_ADD_CLOUD_FILTER: + case VIRTCHNL_OP_DEL_CLOUD_FILTER: + valid_len = sizeof(struct virtchnl_filter); + break; + case VIRTCHNL_OP_GET_SUPPORTED_RXDIDS: + break; + case VIRTCHNL_OP_ADD_RSS_CFG: + case VIRTCHNL_OP_DEL_RSS_CFG: + valid_len = sizeof(struct virtchnl_rss_cfg); + break; + case VIRTCHNL_OP_ADD_FDIR_FILTER: + valid_len = sizeof(struct virtchnl_fdir_add); + break; + case VIRTCHNL_OP_DEL_FDIR_FILTER: + valid_len = sizeof(struct virtchnl_fdir_del); + break; + case VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS: + break; + case VIRTCHNL_OP_ADD_VLAN_V2: + case VIRTCHNL_OP_DEL_VLAN_V2: + valid_len = virtchnl_vlan_filter_list_v2_LEGACY_SIZEOF; + if (msglen >= valid_len) { + struct virtchnl_vlan_filter_list_v2 *vfl = + (struct virtchnl_vlan_filter_list_v2 *)msg; + + valid_len = virtchnl_struct_size(vfl, filters, + vfl->num_elements); + + if (vfl->num_elements == 0) { + err_msg_format = true; + break; + } + } + break; + case VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2: + case VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2: + case VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2: + case VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2: + valid_len = sizeof(struct virtchnl_vlan_setting); + break; + /* These are always errors coming from the VF. */ + case VIRTCHNL_OP_EVENT: + case VIRTCHNL_OP_UNKNOWN: + default: + return VIRTCHNL_STATUS_ERR_PARAM; + } + /* few more checks */ + if (err_msg_format || valid_len != msglen) + return VIRTCHNL_STATUS_ERR_OPCODE_MISMATCH; + + return 0; +} +#endif /* _VIRTCHNL_H_ */ |