diff options
Diffstat (limited to 'include/linux/i3c')
| -rw-r--r-- | include/linux/i3c/ccc.h | 385 | ||||
| -rw-r--r-- | include/linux/i3c/device.h | 346 | ||||
| -rw-r--r-- | include/linux/i3c/master.h | 655 |
3 files changed, 1386 insertions, 0 deletions
diff --git a/include/linux/i3c/ccc.h b/include/linux/i3c/ccc.h new file mode 100644 index 000000000..ad59a4ae6 --- /dev/null +++ b/include/linux/i3c/ccc.h @@ -0,0 +1,385 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 Cadence Design Systems Inc. + * + * Author: Boris Brezillon <boris.brezillon@bootlin.com> + */ + +#ifndef I3C_CCC_H +#define I3C_CCC_H + +#include <linux/bitops.h> +#include <linux/i3c/device.h> + +/* I3C CCC (Common Command Codes) related definitions */ +#define I3C_CCC_DIRECT BIT(7) + +#define I3C_CCC_ID(id, broadcast) \ + ((id) | ((broadcast) ? 0 : I3C_CCC_DIRECT)) + +/* Commands valid in both broadcast and unicast modes */ +#define I3C_CCC_ENEC(broadcast) I3C_CCC_ID(0x0, broadcast) +#define I3C_CCC_DISEC(broadcast) I3C_CCC_ID(0x1, broadcast) +#define I3C_CCC_ENTAS(as, broadcast) I3C_CCC_ID(0x2 + (as), broadcast) +#define I3C_CCC_RSTDAA(broadcast) I3C_CCC_ID(0x6, broadcast) +#define I3C_CCC_SETMWL(broadcast) I3C_CCC_ID(0x9, broadcast) +#define I3C_CCC_SETMRL(broadcast) I3C_CCC_ID(0xa, broadcast) +#define I3C_CCC_SETXTIME(broadcast) ((broadcast) ? 0x28 : 0x98) +#define I3C_CCC_VENDOR(id, broadcast) ((id) + ((broadcast) ? 0x61 : 0xe0)) + +/* Broadcast-only commands */ +#define I3C_CCC_ENTDAA I3C_CCC_ID(0x7, true) +#define I3C_CCC_DEFSLVS I3C_CCC_ID(0x8, true) +#define I3C_CCC_ENTTM I3C_CCC_ID(0xb, true) +#define I3C_CCC_ENTHDR(x) I3C_CCC_ID(0x20 + (x), true) + +/* Unicast-only commands */ +#define I3C_CCC_SETDASA I3C_CCC_ID(0x7, false) +#define I3C_CCC_SETNEWDA I3C_CCC_ID(0x8, false) +#define I3C_CCC_GETMWL I3C_CCC_ID(0xb, false) +#define I3C_CCC_GETMRL I3C_CCC_ID(0xc, false) +#define I3C_CCC_GETPID I3C_CCC_ID(0xd, false) +#define I3C_CCC_GETBCR I3C_CCC_ID(0xe, false) +#define I3C_CCC_GETDCR I3C_CCC_ID(0xf, false) +#define I3C_CCC_GETSTATUS I3C_CCC_ID(0x10, false) +#define I3C_CCC_GETACCMST I3C_CCC_ID(0x11, false) +#define I3C_CCC_SETBRGTGT I3C_CCC_ID(0x13, false) +#define I3C_CCC_GETMXDS I3C_CCC_ID(0x14, false) +#define I3C_CCC_GETHDRCAP I3C_CCC_ID(0x15, false) +#define I3C_CCC_GETXTIME I3C_CCC_ID(0x19, false) + +#define I3C_CCC_EVENT_SIR BIT(0) +#define I3C_CCC_EVENT_MR BIT(1) +#define I3C_CCC_EVENT_HJ BIT(3) + +/** + * struct i3c_ccc_events - payload passed to ENEC/DISEC CCC + * + * @events: bitmask of I3C_CCC_EVENT_xxx events. + * + * Depending on the CCC command, the specific events coming from all devices + * (broadcast version) or a specific device (unicast version) will be + * enabled (ENEC) or disabled (DISEC). + */ +struct i3c_ccc_events { + u8 events; +}; + +/** + * struct i3c_ccc_mwl - payload passed to SETMWL/GETMWL CCC + * + * @len: maximum write length in bytes + * + * The maximum write length is only applicable to SDR private messages or + * extended Write CCCs (like SETXTIME). + */ +struct i3c_ccc_mwl { + __be16 len; +}; + +/** + * struct i3c_ccc_mrl - payload passed to SETMRL/GETMRL CCC + * + * @len: maximum read length in bytes + * @ibi_len: maximum IBI payload length + * + * The maximum read length is only applicable to SDR private messages or + * extended Read CCCs (like GETXTIME). + * The IBI length is only valid if the I3C slave is IBI capable + * (%I3C_BCR_IBI_REQ_CAP is set). + */ +struct i3c_ccc_mrl { + __be16 read_len; + u8 ibi_len; +} __packed; + +/** + * struct i3c_ccc_dev_desc - I3C/I2C device descriptor used for DEFSLVS + * + * @dyn_addr: dynamic address assigned to the I3C slave or 0 if the entry is + * describing an I2C slave. + * @dcr: DCR value (not applicable to entries describing I2C devices) + * @lvr: LVR value (not applicable to entries describing I3C devices) + * @bcr: BCR value or 0 if this entry is describing an I2C slave + * @static_addr: static address or 0 if the device does not have a static + * address + * + * The DEFSLVS command should be passed an array of i3c_ccc_dev_desc + * descriptors (one entry per I3C/I2C dev controlled by the master). + */ +struct i3c_ccc_dev_desc { + u8 dyn_addr; + union { + u8 dcr; + u8 lvr; + }; + u8 bcr; + u8 static_addr; +}; + +/** + * struct i3c_ccc_defslvs - payload passed to DEFSLVS CCC + * + * @count: number of dev descriptors + * @master: descriptor describing the current master + * @slaves: array of descriptors describing slaves controlled by the + * current master + * + * Information passed to the broadcast DEFSLVS to propagate device + * information to all masters currently acting as slaves on the bus. + * This is only meaningful if you have more than one master. + */ +struct i3c_ccc_defslvs { + u8 count; + struct i3c_ccc_dev_desc master; + struct i3c_ccc_dev_desc slaves[]; +} __packed; + +/** + * enum i3c_ccc_test_mode - enum listing all available test modes + * + * @I3C_CCC_EXIT_TEST_MODE: exit test mode + * @I3C_CCC_VENDOR_TEST_MODE: enter vendor test mode + */ +enum i3c_ccc_test_mode { + I3C_CCC_EXIT_TEST_MODE, + I3C_CCC_VENDOR_TEST_MODE, +}; + +/** + * struct i3c_ccc_enttm - payload passed to ENTTM CCC + * + * @mode: one of the &enum i3c_ccc_test_mode modes + * + * Information passed to the ENTTM CCC to instruct an I3C device to enter a + * specific test mode. + */ +struct i3c_ccc_enttm { + u8 mode; +}; + +/** + * struct i3c_ccc_setda - payload passed to SETNEWDA and SETDASA CCCs + * + * @addr: dynamic address to assign to an I3C device + * + * Information passed to the SETNEWDA and SETDASA CCCs to assign/change the + * dynamic address of an I3C device. + */ +struct i3c_ccc_setda { + u8 addr; +}; + +/** + * struct i3c_ccc_getpid - payload passed to GETPID CCC + * + * @pid: 48 bits PID in big endian + */ +struct i3c_ccc_getpid { + u8 pid[6]; +}; + +/** + * struct i3c_ccc_getbcr - payload passed to GETBCR CCC + * + * @bcr: BCR (Bus Characteristic Register) value + */ +struct i3c_ccc_getbcr { + u8 bcr; +}; + +/** + * struct i3c_ccc_getdcr - payload passed to GETDCR CCC + * + * @dcr: DCR (Device Characteristic Register) value + */ +struct i3c_ccc_getdcr { + u8 dcr; +}; + +#define I3C_CCC_STATUS_PENDING_INT(status) ((status) & GENMASK(3, 0)) +#define I3C_CCC_STATUS_PROTOCOL_ERROR BIT(5) +#define I3C_CCC_STATUS_ACTIVITY_MODE(status) \ + (((status) & GENMASK(7, 6)) >> 6) + +/** + * struct i3c_ccc_getstatus - payload passed to GETSTATUS CCC + * + * @status: status of the I3C slave (see I3C_CCC_STATUS_xxx macros for more + * information). + */ +struct i3c_ccc_getstatus { + __be16 status; +}; + +/** + * struct i3c_ccc_getaccmst - payload passed to GETACCMST CCC + * + * @newmaster: address of the master taking bus ownership + */ +struct i3c_ccc_getaccmst { + u8 newmaster; +}; + +/** + * struct i3c_ccc_bridged_slave_desc - bridged slave descriptor + * + * @addr: dynamic address of the bridged device + * @id: ID of the slave device behind the bridge + */ +struct i3c_ccc_bridged_slave_desc { + u8 addr; + __be16 id; +} __packed; + +/** + * struct i3c_ccc_setbrgtgt - payload passed to SETBRGTGT CCC + * + * @count: number of bridged slaves + * @bslaves: bridged slave descriptors + */ +struct i3c_ccc_setbrgtgt { + u8 count; + struct i3c_ccc_bridged_slave_desc bslaves[]; +} __packed; + +/** + * enum i3c_sdr_max_data_rate - max data rate values for private SDR transfers + */ +enum i3c_sdr_max_data_rate { + I3C_SDR0_FSCL_MAX, + I3C_SDR1_FSCL_8MHZ, + I3C_SDR2_FSCL_6MHZ, + I3C_SDR3_FSCL_4MHZ, + I3C_SDR4_FSCL_2MHZ, +}; + +/** + * enum i3c_tsco - clock to data turn-around + */ +enum i3c_tsco { + I3C_TSCO_8NS, + I3C_TSCO_9NS, + I3C_TSCO_10NS, + I3C_TSCO_11NS, + I3C_TSCO_12NS, +}; + +#define I3C_CCC_MAX_SDR_FSCL_MASK GENMASK(2, 0) +#define I3C_CCC_MAX_SDR_FSCL(x) ((x) & I3C_CCC_MAX_SDR_FSCL_MASK) + +/** + * struct i3c_ccc_getmxds - payload passed to GETMXDS CCC + * + * @maxwr: write limitations + * @maxrd: read limitations + * @maxrdturn: maximum read turn-around expressed micro-seconds and + * little-endian formatted + */ +struct i3c_ccc_getmxds { + u8 maxwr; + u8 maxrd; + u8 maxrdturn[3]; +} __packed; + +#define I3C_CCC_HDR_MODE(mode) BIT(mode) + +/** + * struct i3c_ccc_gethdrcap - payload passed to GETHDRCAP CCC + * + * @modes: bitmap of supported HDR modes + */ +struct i3c_ccc_gethdrcap { + u8 modes; +} __packed; + +/** + * enum i3c_ccc_setxtime_subcmd - SETXTIME sub-commands + */ +enum i3c_ccc_setxtime_subcmd { + I3C_CCC_SETXTIME_ST = 0x7f, + I3C_CCC_SETXTIME_DT = 0xbf, + I3C_CCC_SETXTIME_ENTER_ASYNC_MODE0 = 0xdf, + I3C_CCC_SETXTIME_ENTER_ASYNC_MODE1 = 0xef, + I3C_CCC_SETXTIME_ENTER_ASYNC_MODE2 = 0xf7, + I3C_CCC_SETXTIME_ENTER_ASYNC_MODE3 = 0xfb, + I3C_CCC_SETXTIME_ASYNC_TRIGGER = 0xfd, + I3C_CCC_SETXTIME_TPH = 0x3f, + I3C_CCC_SETXTIME_TU = 0x9f, + I3C_CCC_SETXTIME_ODR = 0x8f, +}; + +/** + * struct i3c_ccc_setxtime - payload passed to SETXTIME CCC + * + * @subcmd: one of the sub-commands ddefined in &enum i3c_ccc_setxtime_subcmd + * @data: sub-command payload. Amount of data is determined by + * &i3c_ccc_setxtime->subcmd + */ +struct i3c_ccc_setxtime { + u8 subcmd; + u8 data[]; +} __packed; + +#define I3C_CCC_GETXTIME_SYNC_MODE BIT(0) +#define I3C_CCC_GETXTIME_ASYNC_MODE(x) BIT((x) + 1) +#define I3C_CCC_GETXTIME_OVERFLOW BIT(7) + +/** + * struct i3c_ccc_getxtime - payload retrieved from GETXTIME CCC + * + * @supported_modes: bitmap describing supported XTIME modes + * @state: current status (enabled mode and overflow status) + * @frequency: slave's internal oscillator frequency in 500KHz steps + * @inaccuracy: slave's internal oscillator inaccuracy in 0.1% steps + */ +struct i3c_ccc_getxtime { + u8 supported_modes; + u8 state; + u8 frequency; + u8 inaccuracy; +} __packed; + +/** + * struct i3c_ccc_cmd_payload - CCC payload + * + * @len: payload length + * @data: payload data. This buffer must be DMA-able + */ +struct i3c_ccc_cmd_payload { + u16 len; + void *data; +}; + +/** + * struct i3c_ccc_cmd_dest - CCC command destination + * + * @addr: can be an I3C device address or the broadcast address if this is a + * broadcast CCC + * @payload: payload to be sent to this device or broadcasted + */ +struct i3c_ccc_cmd_dest { + u8 addr; + struct i3c_ccc_cmd_payload payload; +}; + +/** + * struct i3c_ccc_cmd - CCC command + * + * @rnw: true if the CCC should retrieve data from the device. Only valid for + * unicast commands + * @id: CCC command id + * @ndests: number of destinations. Should always be one for broadcast commands + * @dests: array of destinations and associated payload for this CCC. Most of + * the time, only one destination is provided + * @err: I3C error code + */ +struct i3c_ccc_cmd { + u8 rnw; + u8 id; + unsigned int ndests; + struct i3c_ccc_cmd_dest *dests; + enum i3c_error_code err; +}; + +#endif /* I3C_CCC_H */ diff --git a/include/linux/i3c/device.h b/include/linux/i3c/device.h new file mode 100644 index 000000000..90fa83464 --- /dev/null +++ b/include/linux/i3c/device.h @@ -0,0 +1,346 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 Cadence Design Systems Inc. + * + * Author: Boris Brezillon <boris.brezillon@bootlin.com> + */ + +#ifndef I3C_DEV_H +#define I3C_DEV_H + +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/kconfig.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> + +/** + * enum i3c_error_code - I3C error codes + * + * @I3C_ERROR_UNKNOWN: unknown error, usually means the error is not I3C + * related + * @I3C_ERROR_M0: M0 error + * @I3C_ERROR_M1: M1 error + * @I3C_ERROR_M2: M2 error + * + * These are the standard error codes as defined by the I3C specification. + * When -EIO is returned by the i3c_device_do_priv_xfers() or + * i3c_device_send_hdr_cmds() one can check the error code in + * &struct_i3c_priv_xfer.err or &struct i3c_hdr_cmd.err to get a better idea of + * what went wrong. + * + */ +enum i3c_error_code { + I3C_ERROR_UNKNOWN = 0, + I3C_ERROR_M0 = 1, + I3C_ERROR_M1, + I3C_ERROR_M2, +}; + +/** + * enum i3c_hdr_mode - HDR mode ids + * @I3C_HDR_DDR: DDR mode + * @I3C_HDR_TSP: TSP mode + * @I3C_HDR_TSL: TSL mode + */ +enum i3c_hdr_mode { + I3C_HDR_DDR, + I3C_HDR_TSP, + I3C_HDR_TSL, +}; + +/** + * struct i3c_priv_xfer - I3C SDR private transfer + * @rnw: encodes the transfer direction. true for a read, false for a write + * @len: transfer length in bytes of the transfer + * @data: input/output buffer + * @data.in: input buffer. Must point to a DMA-able buffer + * @data.out: output buffer. Must point to a DMA-able buffer + * @err: I3C error code + */ +struct i3c_priv_xfer { + u8 rnw; + u16 len; + union { + void *in; + const void *out; + } data; + enum i3c_error_code err; +}; + +/** + * enum i3c_dcr - I3C DCR values + * @I3C_DCR_GENERIC_DEVICE: generic I3C device + */ +enum i3c_dcr { + I3C_DCR_GENERIC_DEVICE = 0, +}; + +#define I3C_PID_MANUF_ID(pid) (((pid) & GENMASK_ULL(47, 33)) >> 33) +#define I3C_PID_RND_LOWER_32BITS(pid) (!!((pid) & BIT_ULL(32))) +#define I3C_PID_RND_VAL(pid) ((pid) & GENMASK_ULL(31, 0)) +#define I3C_PID_PART_ID(pid) (((pid) & GENMASK_ULL(31, 16)) >> 16) +#define I3C_PID_INSTANCE_ID(pid) (((pid) & GENMASK_ULL(15, 12)) >> 12) +#define I3C_PID_EXTRA_INFO(pid) ((pid) & GENMASK_ULL(11, 0)) + +#define I3C_BCR_DEVICE_ROLE(bcr) ((bcr) & GENMASK(7, 6)) +#define I3C_BCR_I3C_SLAVE (0 << 6) +#define I3C_BCR_I3C_MASTER (1 << 6) +#define I3C_BCR_HDR_CAP BIT(5) +#define I3C_BCR_BRIDGE BIT(4) +#define I3C_BCR_OFFLINE_CAP BIT(3) +#define I3C_BCR_IBI_PAYLOAD BIT(2) +#define I3C_BCR_IBI_REQ_CAP BIT(1) +#define I3C_BCR_MAX_DATA_SPEED_LIM BIT(0) + +/** + * struct i3c_device_info - I3C device information + * @pid: Provisional ID + * @bcr: Bus Characteristic Register + * @dcr: Device Characteristic Register + * @static_addr: static/I2C address + * @dyn_addr: dynamic address + * @hdr_cap: supported HDR modes + * @max_read_ds: max read speed information + * @max_write_ds: max write speed information + * @max_ibi_len: max IBI payload length + * @max_read_turnaround: max read turn-around time in micro-seconds + * @max_read_len: max private SDR read length in bytes + * @max_write_len: max private SDR write length in bytes + * + * These are all basic information that should be advertised by an I3C device. + * Some of them are optional depending on the device type and device + * capabilities. + * For each I3C slave attached to a master with + * i3c_master_add_i3c_dev_locked(), the core will send the relevant CCC command + * to retrieve these data. + */ +struct i3c_device_info { + u64 pid; + u8 bcr; + u8 dcr; + u8 static_addr; + u8 dyn_addr; + u8 hdr_cap; + u8 max_read_ds; + u8 max_write_ds; + u8 max_ibi_len; + u32 max_read_turnaround; + u16 max_read_len; + u16 max_write_len; +}; + +/* + * I3C device internals are kept hidden from I3C device users. It's just + * simpler to refactor things when everything goes through getter/setters, and + * I3C device drivers should not have to worry about internal representation + * anyway. + */ +struct i3c_device; + +/* These macros should be used to i3c_device_id entries. */ +#define I3C_MATCH_MANUF_AND_PART (I3C_MATCH_MANUF | I3C_MATCH_PART) + +#define I3C_DEVICE(_manufid, _partid, _drvdata) \ + { \ + .match_flags = I3C_MATCH_MANUF_AND_PART, \ + .manuf_id = _manufid, \ + .part_id = _partid, \ + .data = _drvdata, \ + } + +#define I3C_DEVICE_EXTRA_INFO(_manufid, _partid, _info, _drvdata) \ + { \ + .match_flags = I3C_MATCH_MANUF_AND_PART | \ + I3C_MATCH_EXTRA_INFO, \ + .manuf_id = _manufid, \ + .part_id = _partid, \ + .extra_info = _info, \ + .data = _drvdata, \ + } + +#define I3C_CLASS(_dcr, _drvdata) \ + { \ + .match_flags = I3C_MATCH_DCR, \ + .dcr = _dcr, \ + } + +/** + * struct i3c_driver - I3C device driver + * @driver: inherit from device_driver + * @probe: I3C device probe method + * @remove: I3C device remove method + * @id_table: I3C device match table. Will be used by the framework to decide + * which device to bind to this driver + */ +struct i3c_driver { + struct device_driver driver; + int (*probe)(struct i3c_device *dev); + void (*remove)(struct i3c_device *dev); + const struct i3c_device_id *id_table; +}; + +static inline struct i3c_driver *drv_to_i3cdrv(struct device_driver *drv) +{ + return container_of(drv, struct i3c_driver, driver); +} + +struct device *i3cdev_to_dev(struct i3c_device *i3cdev); + +/** + * dev_to_i3cdev() - Returns the I3C device containing @dev + * @__dev: device object + * + * Return: a pointer to an I3C device object. + */ +#define dev_to_i3cdev(__dev) container_of_const(__dev, struct i3c_device, dev) + +const struct i3c_device_id * +i3c_device_match_id(struct i3c_device *i3cdev, + const struct i3c_device_id *id_table); + +static inline void i3cdev_set_drvdata(struct i3c_device *i3cdev, + void *data) +{ + struct device *dev = i3cdev_to_dev(i3cdev); + + dev_set_drvdata(dev, data); +} + +static inline void *i3cdev_get_drvdata(struct i3c_device *i3cdev) +{ + struct device *dev = i3cdev_to_dev(i3cdev); + + return dev_get_drvdata(dev); +} + +int i3c_driver_register_with_owner(struct i3c_driver *drv, + struct module *owner); +void i3c_driver_unregister(struct i3c_driver *drv); + +#define i3c_driver_register(__drv) \ + i3c_driver_register_with_owner(__drv, THIS_MODULE) + +/** + * module_i3c_driver() - Register a module providing an I3C driver + * @__drv: the I3C driver to register + * + * Provide generic init/exit functions that simply register/unregister an I3C + * driver. + * Should be used by any driver that does not require extra init/cleanup steps. + */ +#define module_i3c_driver(__drv) \ + module_driver(__drv, i3c_driver_register, i3c_driver_unregister) + +/** + * i3c_i2c_driver_register() - Register an i2c and an i3c driver + * @i3cdrv: the I3C driver to register + * @i2cdrv: the I2C driver to register + * + * This function registers both @i2cdev and @i3cdev, and fails if one of these + * registrations fails. This is mainly useful for devices that support both I2C + * and I3C modes. + * Note that when CONFIG_I3C is not enabled, this function only registers the + * I2C driver. + * + * Return: 0 if both registrations succeeds, a negative error code otherwise. + */ +static inline int i3c_i2c_driver_register(struct i3c_driver *i3cdrv, + struct i2c_driver *i2cdrv) +{ + int ret; + + ret = i2c_add_driver(i2cdrv); + if (ret || !IS_ENABLED(CONFIG_I3C)) + return ret; + + ret = i3c_driver_register(i3cdrv); + if (ret) + i2c_del_driver(i2cdrv); + + return ret; +} + +/** + * i3c_i2c_driver_unregister() - Unregister an i2c and an i3c driver + * @i3cdrv: the I3C driver to register + * @i2cdrv: the I2C driver to register + * + * This function unregisters both @i3cdrv and @i2cdrv. + * Note that when CONFIG_I3C is not enabled, this function only unregisters the + * @i2cdrv. + */ +static inline void i3c_i2c_driver_unregister(struct i3c_driver *i3cdrv, + struct i2c_driver *i2cdrv) +{ + if (IS_ENABLED(CONFIG_I3C)) + i3c_driver_unregister(i3cdrv); + + i2c_del_driver(i2cdrv); +} + +/** + * module_i3c_i2c_driver() - Register a module providing an I3C and an I2C + * driver + * @__i3cdrv: the I3C driver to register + * @__i2cdrv: the I3C driver to register + * + * Provide generic init/exit functions that simply register/unregister an I3C + * and an I2C driver. + * This macro can be used even if CONFIG_I3C is disabled, in this case, only + * the I2C driver will be registered. + * Should be used by any driver that does not require extra init/cleanup steps. + */ +#define module_i3c_i2c_driver(__i3cdrv, __i2cdrv) \ + module_driver(__i3cdrv, \ + i3c_i2c_driver_register, \ + i3c_i2c_driver_unregister, \ + __i2cdrv) + +int i3c_device_do_priv_xfers(struct i3c_device *dev, + struct i3c_priv_xfer *xfers, + int nxfers); + +int i3c_device_do_setdasa(struct i3c_device *dev); + +void i3c_device_get_info(const struct i3c_device *dev, struct i3c_device_info *info); + +struct i3c_ibi_payload { + unsigned int len; + const void *data; +}; + +/** + * struct i3c_ibi_setup - IBI setup object + * @max_payload_len: maximum length of the payload associated to an IBI. If one + * IBI appears to have a payload that is bigger than this + * number, the IBI will be rejected. + * @num_slots: number of pre-allocated IBI slots. This should be chosen so that + * the system never runs out of IBI slots, otherwise you'll lose + * IBIs. + * @handler: IBI handler, every time an IBI is received. This handler is called + * in a workqueue context. It is allowed to sleep and send new + * messages on the bus, though it's recommended to keep the + * processing done there as fast as possible to avoid delaying + * processing of other queued on the same workqueue. + * + * Temporary structure used to pass information to i3c_device_request_ibi(). + * This object can be allocated on the stack since i3c_device_request_ibi() + * copies every bit of information and do not use it after + * i3c_device_request_ibi() has returned. + */ +struct i3c_ibi_setup { + unsigned int max_payload_len; + unsigned int num_slots; + void (*handler)(struct i3c_device *dev, + const struct i3c_ibi_payload *payload); +}; + +int i3c_device_request_ibi(struct i3c_device *dev, + const struct i3c_ibi_setup *setup); +void i3c_device_free_ibi(struct i3c_device *dev); +int i3c_device_enable_ibi(struct i3c_device *dev); +int i3c_device_disable_ibi(struct i3c_device *dev); + +#endif /* I3C_DEV_H */ diff --git a/include/linux/i3c/master.h b/include/linux/i3c/master.h new file mode 100644 index 000000000..0b52da4f2 --- /dev/null +++ b/include/linux/i3c/master.h @@ -0,0 +1,655 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 Cadence Design Systems Inc. + * + * Author: Boris Brezillon <boris.brezillon@bootlin.com> + */ + +#ifndef I3C_MASTER_H +#define I3C_MASTER_H + +#include <asm/bitsperlong.h> + +#include <linux/bitops.h> +#include <linux/i2c.h> +#include <linux/i3c/ccc.h> +#include <linux/i3c/device.h> +#include <linux/rwsem.h> +#include <linux/spinlock.h> +#include <linux/workqueue.h> + +#define I3C_HOT_JOIN_ADDR 0x2 +#define I3C_BROADCAST_ADDR 0x7e +#define I3C_MAX_ADDR GENMASK(6, 0) + +struct i2c_client; + +struct i3c_master_controller; +struct i3c_bus; +struct i3c_device; + +/** + * struct i3c_i2c_dev_desc - Common part of the I3C/I2C device descriptor + * @node: node element used to insert the slot into the I2C or I3C device + * list + * @master: I3C master that instantiated this device. Will be used to do + * I2C/I3C transfers + * @master_priv: master private data assigned to the device. Can be used to + * add master specific information + * + * This structure is describing common I3C/I2C dev information. + */ +struct i3c_i2c_dev_desc { + struct list_head node; + struct i3c_master_controller *master; + void *master_priv; +}; + +#define I3C_LVR_I2C_INDEX_MASK GENMASK(7, 5) +#define I3C_LVR_I2C_INDEX(x) ((x) << 5) +#define I3C_LVR_I2C_FM_MODE BIT(4) + +#define I2C_MAX_ADDR GENMASK(6, 0) + +/** + * struct i2c_dev_boardinfo - I2C device board information + * @node: used to insert the boardinfo object in the I2C boardinfo list + * @base: regular I2C board information + * @lvr: LVR (Legacy Virtual Register) needed by the I3C core to know about + * the I2C device limitations + * + * This structure is used to attach board-level information to an I2C device. + * Each I2C device connected on the I3C bus should have one. + */ +struct i2c_dev_boardinfo { + struct list_head node; + struct i2c_board_info base; + u8 lvr; +}; + +/** + * struct i2c_dev_desc - I2C device descriptor + * @common: common part of the I2C device descriptor + * @boardinfo: pointer to the boardinfo attached to this I2C device + * @dev: I2C device object registered to the I2C framework + * @addr: I2C device address + * @lvr: LVR (Legacy Virtual Register) needed by the I3C core to know about + * the I2C device limitations + * + * Each I2C device connected on the bus will have an i2c_dev_desc. + * This object is created by the core and later attached to the controller + * using &struct_i3c_master_controller->ops->attach_i2c_dev(). + * + * &struct_i2c_dev_desc is the internal representation of an I2C device + * connected on an I3C bus. This object is also passed to all + * &struct_i3c_master_controller_ops hooks. + */ +struct i2c_dev_desc { + struct i3c_i2c_dev_desc common; + struct i2c_client *dev; + u16 addr; + u8 lvr; +}; + +/** + * struct i3c_ibi_slot - I3C IBI (In-Band Interrupt) slot + * @work: work associated to this slot. The IBI handler will be called from + * there + * @dev: the I3C device that has generated this IBI + * @len: length of the payload associated to this IBI + * @data: payload buffer + * + * An IBI slot is an object pre-allocated by the controller and used when an + * IBI comes in. + * Every time an IBI comes in, the I3C master driver should find a free IBI + * slot in its IBI slot pool, retrieve the IBI payload and queue the IBI using + * i3c_master_queue_ibi(). + * + * How IBI slots are allocated is left to the I3C master driver, though, for + * simple kmalloc-based allocation, the generic IBI slot pool can be used. + */ +struct i3c_ibi_slot { + struct work_struct work; + struct i3c_dev_desc *dev; + unsigned int len; + void *data; +}; + +/** + * struct i3c_device_ibi_info - IBI information attached to a specific device + * @all_ibis_handled: used to be informed when no more IBIs are waiting to be + * processed. Used by i3c_device_disable_ibi() to wait for + * all IBIs to be dequeued + * @pending_ibis: count the number of pending IBIs. Each pending IBI has its + * work element queued to the controller workqueue + * @max_payload_len: maximum payload length for an IBI coming from this device. + * this value is specified when calling + * i3c_device_request_ibi() and should not change at run + * time. All messages IBIs exceeding this limit should be + * rejected by the master + * @num_slots: number of IBI slots reserved for this device + * @enabled: reflect the IBI status + * @handler: IBI handler specified at i3c_device_request_ibi() call time. This + * handler will be called from the controller workqueue, and as such + * is allowed to sleep (though it is recommended to process the IBI + * as fast as possible to not stall processing of other IBIs queued + * on the same workqueue). + * New I3C messages can be sent from the IBI handler + * + * The &struct_i3c_device_ibi_info object is allocated when + * i3c_device_request_ibi() is called and attached to a specific device. This + * object is here to manage IBIs coming from a specific I3C device. + * + * Note that this structure is the generic view of the IBI management + * infrastructure. I3C master drivers may have their own internal + * representation which they can associate to the device using + * controller-private data. + */ +struct i3c_device_ibi_info { + struct completion all_ibis_handled; + atomic_t pending_ibis; + unsigned int max_payload_len; + unsigned int num_slots; + unsigned int enabled; + void (*handler)(struct i3c_device *dev, + const struct i3c_ibi_payload *payload); +}; + +/** + * struct i3c_dev_boardinfo - I3C device board information + * @node: used to insert the boardinfo object in the I3C boardinfo list + * @init_dyn_addr: initial dynamic address requested by the FW. We provide no + * guarantee that the device will end up using this address, + * but try our best to assign this specific address to the + * device + * @static_addr: static address the I3C device listen on before it's been + * assigned a dynamic address by the master. Will be used during + * bus initialization to assign it a specific dynamic address + * before starting DAA (Dynamic Address Assignment) + * @pid: I3C Provisional ID exposed by the device. This is a unique identifier + * that may be used to attach boardinfo to i3c_dev_desc when the device + * does not have a static address + * @of_node: optional DT node in case the device has been described in the DT + * + * This structure is used to attach board-level information to an I3C device. + * Not all I3C devices connected on the bus will have a boardinfo. It's only + * needed if you want to attach extra resources to a device or assign it a + * specific dynamic address. + */ +struct i3c_dev_boardinfo { + struct list_head node; + u8 init_dyn_addr; + u8 static_addr; + u64 pid; + struct device_node *of_node; +}; + +/** + * struct i3c_dev_desc - I3C device descriptor + * @common: common part of the I3C device descriptor + * @info: I3C device information. Will be automatically filled when you create + * your device with i3c_master_add_i3c_dev_locked() + * @ibi_lock: lock used to protect the &struct_i3c_device->ibi + * @ibi: IBI info attached to a device. Should be NULL until + * i3c_device_request_ibi() is called + * @dev: pointer to the I3C device object exposed to I3C device drivers. This + * should never be accessed from I3C master controller drivers. Only core + * code should manipulate it in when updating the dev <-> desc link or + * when propagating IBI events to the driver + * @boardinfo: pointer to the boardinfo attached to this I3C device + * + * Internal representation of an I3C device. This object is only used by the + * core and passed to I3C master controller drivers when they're requested to + * do some operations on the device. + * The core maintains the link between the internal I3C dev descriptor and the + * object exposed to the I3C device drivers (&struct_i3c_device). + */ +struct i3c_dev_desc { + struct i3c_i2c_dev_desc common; + struct i3c_device_info info; + struct mutex ibi_lock; + struct i3c_device_ibi_info *ibi; + struct i3c_device *dev; + const struct i3c_dev_boardinfo *boardinfo; +}; + +/** + * struct i3c_device - I3C device object + * @dev: device object to register the I3C dev to the device model + * @desc: pointer to an i3c device descriptor object. This link is updated + * every time the I3C device is rediscovered with a different dynamic + * address assigned + * @bus: I3C bus this device is attached to + * + * I3C device object exposed to I3C device drivers. The takes care of linking + * this object to the relevant &struct_i3c_dev_desc one. + * All I3C devs on the I3C bus are represented, including I3C masters. For each + * of them, we have an instance of &struct i3c_device. + */ +struct i3c_device { + struct device dev; + struct i3c_dev_desc *desc; + struct i3c_bus *bus; +}; + +/* + * The I3C specification says the maximum number of devices connected on the + * bus is 11, but this number depends on external parameters like trace length, + * capacitive load per Device, and the types of Devices present on the Bus. + * I3C master can also have limitations, so this number is just here as a + * reference and should be adjusted on a per-controller/per-board basis. + */ +#define I3C_BUS_MAX_DEVS 11 + +#define I3C_BUS_MAX_I3C_SCL_RATE 12900000 +#define I3C_BUS_TYP_I3C_SCL_RATE 12500000 +#define I3C_BUS_I2C_FM_PLUS_SCL_RATE 1000000 +#define I3C_BUS_I2C_FM_SCL_RATE 400000 +#define I3C_BUS_TLOW_OD_MIN_NS 200 + +/** + * enum i3c_bus_mode - I3C bus mode + * @I3C_BUS_MODE_PURE: only I3C devices are connected to the bus. No limitation + * expected + * @I3C_BUS_MODE_MIXED_FAST: I2C devices with 50ns spike filter are present on + * the bus. The only impact in this mode is that the + * high SCL pulse has to stay below 50ns to trick I2C + * devices when transmitting I3C frames + * @I3C_BUS_MODE_MIXED_LIMITED: I2C devices without 50ns spike filter are + * present on the bus. However they allow + * compliance up to the maximum SDR SCL clock + * frequency. + * @I3C_BUS_MODE_MIXED_SLOW: I2C devices without 50ns spike filter are present + * on the bus + */ +enum i3c_bus_mode { + I3C_BUS_MODE_PURE, + I3C_BUS_MODE_MIXED_FAST, + I3C_BUS_MODE_MIXED_LIMITED, + I3C_BUS_MODE_MIXED_SLOW, +}; + +/** + * enum i3c_addr_slot_status - I3C address slot status + * @I3C_ADDR_SLOT_FREE: address is free + * @I3C_ADDR_SLOT_RSVD: address is reserved + * @I3C_ADDR_SLOT_I2C_DEV: address is assigned to an I2C device + * @I3C_ADDR_SLOT_I3C_DEV: address is assigned to an I3C device + * @I3C_ADDR_SLOT_STATUS_MASK: address slot mask + * + * On an I3C bus, addresses are assigned dynamically, and we need to know which + * addresses are free to use and which ones are already assigned. + * + * Addresses marked as reserved are those reserved by the I3C protocol + * (broadcast address, ...). + */ +enum i3c_addr_slot_status { + I3C_ADDR_SLOT_FREE, + I3C_ADDR_SLOT_RSVD, + I3C_ADDR_SLOT_I2C_DEV, + I3C_ADDR_SLOT_I3C_DEV, + I3C_ADDR_SLOT_STATUS_MASK = 3, +}; + +/** + * struct i3c_bus - I3C bus object + * @cur_master: I3C master currently driving the bus. Since I3C is multi-master + * this can change over the time. Will be used to let a master + * know whether it needs to request bus ownership before sending + * a frame or not + * @id: bus ID. Assigned by the framework when register the bus + * @addrslots: a bitmap with 2-bits per-slot to encode the address status and + * ease the DAA (Dynamic Address Assignment) procedure (see + * &enum i3c_addr_slot_status) + * @mode: bus mode (see &enum i3c_bus_mode) + * @scl_rate.i3c: maximum rate for the clock signal when doing I3C SDR/priv + * transfers + * @scl_rate.i2c: maximum rate for the clock signal when doing I2C transfers + * @scl_rate: SCL signal rate for I3C and I2C mode + * @devs.i3c: contains a list of I3C device descriptors representing I3C + * devices connected on the bus and successfully attached to the + * I3C master + * @devs.i2c: contains a list of I2C device descriptors representing I2C + * devices connected on the bus and successfully attached to the + * I3C master + * @devs: 2 lists containing all I3C/I2C devices connected to the bus + * @lock: read/write lock on the bus. This is needed to protect against + * operations that have an impact on the whole bus and the devices + * connected to it. For example, when asking slaves to drop their + * dynamic address (RSTDAA CCC), we need to make sure no one is trying + * to send I3C frames to these devices. + * Note that this lock does not protect against concurrency between + * devices: several drivers can send different I3C/I2C frames through + * the same master in parallel. This is the responsibility of the + * master to guarantee that frames are actually sent sequentially and + * not interlaced + * + * The I3C bus is represented with its own object and not implicitly described + * by the I3C master to cope with the multi-master functionality, where one bus + * can be shared amongst several masters, each of them requesting bus ownership + * when they need to. + */ +struct i3c_bus { + struct i3c_dev_desc *cur_master; + int id; + unsigned long addrslots[((I2C_MAX_ADDR + 1) * 2) / BITS_PER_LONG]; + enum i3c_bus_mode mode; + struct { + unsigned long i3c; + unsigned long i2c; + } scl_rate; + struct { + struct list_head i3c; + struct list_head i2c; + } devs; + struct rw_semaphore lock; +}; + +/** + * struct i3c_master_controller_ops - I3C master methods + * @bus_init: hook responsible for the I3C bus initialization. You should at + * least call master_set_info() from there and set the bus mode. + * You can also put controller specific initialization in there. + * This method is mandatory. + * @bus_cleanup: cleanup everything done in + * &i3c_master_controller_ops->bus_init(). + * This method is optional. + * @attach_i3c_dev: called every time an I3C device is attached to the bus. It + * can be after a DAA or when a device is statically declared + * by the FW, in which case it will only have a static address + * and the dynamic address will be 0. + * When this function is called, device information have not + * been retrieved yet. + * This is a good place to attach master controller specific + * data to I3C devices. + * This method is optional. + * @reattach_i3c_dev: called every time an I3C device has its addressed + * changed. It can be because the device has been powered + * down and has lost its address, or it can happen when a + * device had a static address and has been assigned a + * dynamic address with SETDASA. + * This method is optional. + * @detach_i3c_dev: called when an I3C device is detached from the bus. Usually + * happens when the master device is unregistered. + * This method is optional. + * @do_daa: do a DAA (Dynamic Address Assignment) procedure. This is procedure + * should send an ENTDAA CCC command and then add all devices + * discovered sure the DAA using i3c_master_add_i3c_dev_locked(). + * Add devices added with i3c_master_add_i3c_dev_locked() will then be + * attached or re-attached to the controller. + * This method is mandatory. + * @supports_ccc_cmd: should return true if the CCC command is supported, false + * otherwise. + * This method is optional, if not provided the core assumes + * all CCC commands are supported. + * @send_ccc_cmd: send a CCC command + * This method is mandatory. + * @priv_xfers: do one or several private I3C SDR transfers + * This method is mandatory. + * @attach_i2c_dev: called every time an I2C device is attached to the bus. + * This is a good place to attach master controller specific + * data to I2C devices. + * This method is optional. + * @detach_i2c_dev: called when an I2C device is detached from the bus. Usually + * happens when the master device is unregistered. + * This method is optional. + * @i2c_xfers: do one or several I2C transfers. Note that, unlike i3c + * transfers, the core does not guarantee that buffers attached to + * the transfers are DMA-safe. If drivers want to have DMA-safe + * buffers, they should use the i2c_get_dma_safe_msg_buf() + * and i2c_put_dma_safe_msg_buf() helpers provided by the I2C + * framework. + * This method is mandatory. + * @request_ibi: attach an IBI handler to an I3C device. This implies defining + * an IBI handler and the constraints of the IBI (maximum payload + * length and number of pre-allocated slots). + * Some controllers support less IBI-capable devices than regular + * devices, so this method might return -%EBUSY if there's no + * more space for an extra IBI registration + * This method is optional. + * @free_ibi: free an IBI previously requested with ->request_ibi(). The IBI + * should have been disabled with ->disable_irq() prior to that + * This method is mandatory only if ->request_ibi is not NULL. + * @enable_ibi: enable the IBI. Only valid if ->request_ibi() has been called + * prior to ->enable_ibi(). The controller should first enable + * the IBI on the controller end (for example, unmask the hardware + * IRQ) and then send the ENEC CCC command (with the IBI flag set) + * to the I3C device. + * This method is mandatory only if ->request_ibi is not NULL. + * @disable_ibi: disable an IBI. First send the DISEC CCC command with the IBI + * flag set and then deactivate the hardware IRQ on the + * controller end. + * This method is mandatory only if ->request_ibi is not NULL. + * @recycle_ibi_slot: recycle an IBI slot. Called every time an IBI has been + * processed by its handler. The IBI slot should be put back + * in the IBI slot pool so that the controller can re-use it + * for a future IBI + * This method is mandatory only if ->request_ibi is not + * NULL. + */ +struct i3c_master_controller_ops { + int (*bus_init)(struct i3c_master_controller *master); + void (*bus_cleanup)(struct i3c_master_controller *master); + int (*attach_i3c_dev)(struct i3c_dev_desc *dev); + int (*reattach_i3c_dev)(struct i3c_dev_desc *dev, u8 old_dyn_addr); + void (*detach_i3c_dev)(struct i3c_dev_desc *dev); + int (*do_daa)(struct i3c_master_controller *master); + bool (*supports_ccc_cmd)(struct i3c_master_controller *master, + const struct i3c_ccc_cmd *cmd); + int (*send_ccc_cmd)(struct i3c_master_controller *master, + struct i3c_ccc_cmd *cmd); + int (*priv_xfers)(struct i3c_dev_desc *dev, + struct i3c_priv_xfer *xfers, + int nxfers); + int (*attach_i2c_dev)(struct i2c_dev_desc *dev); + void (*detach_i2c_dev)(struct i2c_dev_desc *dev); + int (*i2c_xfers)(struct i2c_dev_desc *dev, + const struct i2c_msg *xfers, int nxfers); + int (*request_ibi)(struct i3c_dev_desc *dev, + const struct i3c_ibi_setup *req); + void (*free_ibi)(struct i3c_dev_desc *dev); + int (*enable_ibi)(struct i3c_dev_desc *dev); + int (*disable_ibi)(struct i3c_dev_desc *dev); + void (*recycle_ibi_slot)(struct i3c_dev_desc *dev, + struct i3c_ibi_slot *slot); +}; + +/** + * struct i3c_master_controller - I3C master controller object + * @dev: device to be registered to the device-model + * @this: an I3C device object representing this master. This device will be + * added to the list of I3C devs available on the bus + * @i2c: I2C adapter used for backward compatibility. This adapter is + * registered to the I2C subsystem to be as transparent as possible to + * existing I2C drivers + * @ops: master operations. See &struct i3c_master_controller_ops + * @secondary: true if the master is a secondary master + * @init_done: true when the bus initialization is done + * @boardinfo.i3c: list of I3C boardinfo objects + * @boardinfo.i2c: list of I2C boardinfo objects + * @boardinfo: board-level information attached to devices connected on the bus + * @bus: I3C bus exposed by this master + * @wq: workqueue used to execute IBI handlers. Can also be used by master + * drivers if they need to postpone operations that need to take place + * in a thread context. Typical examples are Hot Join processing which + * requires taking the bus lock in maintenance, which in turn, can only + * be done from a sleep-able context + * + * A &struct i3c_master_controller has to be registered to the I3C subsystem + * through i3c_master_register(). None of &struct i3c_master_controller fields + * should be set manually, just pass appropriate values to + * i3c_master_register(). + */ +struct i3c_master_controller { + struct device dev; + struct i3c_dev_desc *this; + struct i2c_adapter i2c; + const struct i3c_master_controller_ops *ops; + unsigned int secondary : 1; + unsigned int init_done : 1; + struct { + struct list_head i3c; + struct list_head i2c; + } boardinfo; + struct i3c_bus bus; + struct workqueue_struct *wq; +}; + +/** + * i3c_bus_for_each_i2cdev() - iterate over all I2C devices present on the bus + * @bus: the I3C bus + * @dev: an I2C device descriptor pointer updated to point to the current slot + * at each iteration of the loop + * + * Iterate over all I2C devs present on the bus. + */ +#define i3c_bus_for_each_i2cdev(bus, dev) \ + list_for_each_entry(dev, &(bus)->devs.i2c, common.node) + +/** + * i3c_bus_for_each_i3cdev() - iterate over all I3C devices present on the bus + * @bus: the I3C bus + * @dev: and I3C device descriptor pointer updated to point to the current slot + * at each iteration of the loop + * + * Iterate over all I3C devs present on the bus. + */ +#define i3c_bus_for_each_i3cdev(bus, dev) \ + list_for_each_entry(dev, &(bus)->devs.i3c, common.node) + +int i3c_master_do_i2c_xfers(struct i3c_master_controller *master, + const struct i2c_msg *xfers, + int nxfers); + +int i3c_master_disec_locked(struct i3c_master_controller *master, u8 addr, + u8 evts); +int i3c_master_enec_locked(struct i3c_master_controller *master, u8 addr, + u8 evts); +int i3c_master_entdaa_locked(struct i3c_master_controller *master); +int i3c_master_defslvs_locked(struct i3c_master_controller *master); + +int i3c_master_get_free_addr(struct i3c_master_controller *master, + u8 start_addr); + +int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master, + u8 addr); +int i3c_master_do_daa(struct i3c_master_controller *master); + +int i3c_master_set_info(struct i3c_master_controller *master, + const struct i3c_device_info *info); + +int i3c_master_register(struct i3c_master_controller *master, + struct device *parent, + const struct i3c_master_controller_ops *ops, + bool secondary); +void i3c_master_unregister(struct i3c_master_controller *master); + +/** + * i3c_dev_get_master_data() - get master private data attached to an I3C + * device descriptor + * @dev: the I3C device descriptor to get private data from + * + * Return: the private data previously attached with i3c_dev_set_master_data() + * or NULL if no data has been attached to the device. + */ +static inline void *i3c_dev_get_master_data(const struct i3c_dev_desc *dev) +{ + return dev->common.master_priv; +} + +/** + * i3c_dev_set_master_data() - attach master private data to an I3C device + * descriptor + * @dev: the I3C device descriptor to attach private data to + * @data: private data + * + * This functions allows a master controller to attach per-device private data + * which can then be retrieved with i3c_dev_get_master_data(). + */ +static inline void i3c_dev_set_master_data(struct i3c_dev_desc *dev, + void *data) +{ + dev->common.master_priv = data; +} + +/** + * i2c_dev_get_master_data() - get master private data attached to an I2C + * device descriptor + * @dev: the I2C device descriptor to get private data from + * + * Return: the private data previously attached with i2c_dev_set_master_data() + * or NULL if no data has been attached to the device. + */ +static inline void *i2c_dev_get_master_data(const struct i2c_dev_desc *dev) +{ + return dev->common.master_priv; +} + +/** + * i2c_dev_set_master_data() - attach master private data to an I2C device + * descriptor + * @dev: the I2C device descriptor to attach private data to + * @data: private data + * + * This functions allows a master controller to attach per-device private data + * which can then be retrieved with i2c_device_get_master_data(). + */ +static inline void i2c_dev_set_master_data(struct i2c_dev_desc *dev, + void *data) +{ + dev->common.master_priv = data; +} + +/** + * i3c_dev_get_master() - get master used to communicate with a device + * @dev: I3C dev + * + * Return: the master controller driving @dev + */ +static inline struct i3c_master_controller * +i3c_dev_get_master(struct i3c_dev_desc *dev) +{ + return dev->common.master; +} + +/** + * i2c_dev_get_master() - get master used to communicate with a device + * @dev: I2C dev + * + * Return: the master controller driving @dev + */ +static inline struct i3c_master_controller * +i2c_dev_get_master(struct i2c_dev_desc *dev) +{ + return dev->common.master; +} + +/** + * i3c_master_get_bus() - get the bus attached to a master + * @master: master object + * + * Return: the I3C bus @master is connected to + */ +static inline struct i3c_bus * +i3c_master_get_bus(struct i3c_master_controller *master) +{ + return &master->bus; +} + +struct i3c_generic_ibi_pool; + +struct i3c_generic_ibi_pool * +i3c_generic_ibi_alloc_pool(struct i3c_dev_desc *dev, + const struct i3c_ibi_setup *req); +void i3c_generic_ibi_free_pool(struct i3c_generic_ibi_pool *pool); + +struct i3c_ibi_slot * +i3c_generic_ibi_get_free_slot(struct i3c_generic_ibi_pool *pool); +void i3c_generic_ibi_recycle_slot(struct i3c_generic_ibi_pool *pool, + struct i3c_ibi_slot *slot); + +void i3c_master_queue_ibi(struct i3c_dev_desc *dev, struct i3c_ibi_slot *slot); + +struct i3c_ibi_slot *i3c_master_get_free_ibi_slot(struct i3c_dev_desc *dev); + +#endif /* I3C_MASTER_H */ |