diff options
Diffstat (limited to 'include/linux/mfd/sta2x11-mfd.h')
| -rw-r--r-- | include/linux/mfd/sta2x11-mfd.h | 506 |
1 files changed, 506 insertions, 0 deletions
diff --git a/include/linux/mfd/sta2x11-mfd.h b/include/linux/mfd/sta2x11-mfd.h new file mode 100644 index 000000000..2001ca5c4 --- /dev/null +++ b/include/linux/mfd/sta2x11-mfd.h @@ -0,0 +1,506 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2009-2011 Wind River Systems, Inc. + * Copyright (c) 2011 ST Microelectronics (Alessandro Rubini) + * + * The STMicroelectronics ConneXt (STA2X11) chip has several unrelated + * functions in one PCI endpoint functions. This driver simply + * registers the platform devices in this iomemregion and exports a few + * functions to access common registers + */ + +#ifndef __STA2X11_MFD_H +#define __STA2X11_MFD_H +#include <linux/types.h> +#include <linux/pci.h> + +enum sta2x11_mfd_plat_dev { + sta2x11_sctl = 0, + sta2x11_gpio, + sta2x11_scr, + sta2x11_time, + sta2x11_apbreg, + sta2x11_apb_soc_regs, + sta2x11_vic, + sta2x11_n_mfd_plat_devs, +}; + +#define STA2X11_MFD_SCTL_NAME "sta2x11-sctl" +#define STA2X11_MFD_GPIO_NAME "sta2x11-gpio" +#define STA2X11_MFD_SCR_NAME "sta2x11-scr" +#define STA2X11_MFD_TIME_NAME "sta2x11-time" +#define STA2X11_MFD_APBREG_NAME "sta2x11-apbreg" +#define STA2X11_MFD_APB_SOC_REGS_NAME "sta2x11-apb-soc-regs" +#define STA2X11_MFD_VIC_NAME "sta2x11-vic" + +extern u32 +__sta2x11_mfd_mask(struct pci_dev *, u32, u32, u32, enum sta2x11_mfd_plat_dev); + +/* + * The MFD PCI block includes the GPIO peripherals and other register blocks. + * For GPIO, we have 32*4 bits (I use "gsta" for "gpio sta2x11".) + */ +#define GSTA_GPIO_PER_BLOCK 32 +#define GSTA_NR_BLOCKS 4 +#define GSTA_NR_GPIO (GSTA_GPIO_PER_BLOCK * GSTA_NR_BLOCKS) + +/* Pinconfig is set by the board definition: altfunc, pull-up, pull-down */ +struct sta2x11_gpio_pdata { + unsigned pinconfig[GSTA_NR_GPIO]; +}; + +/* Macros below lifted from sh_pfc.h, with minor differences */ +#define PINMUX_TYPE_NONE 0 +#define PINMUX_TYPE_FUNCTION 1 +#define PINMUX_TYPE_OUTPUT_LOW 2 +#define PINMUX_TYPE_OUTPUT_HIGH 3 +#define PINMUX_TYPE_INPUT 4 +#define PINMUX_TYPE_INPUT_PULLUP 5 +#define PINMUX_TYPE_INPUT_PULLDOWN 6 + +/* Give names to GPIO pins, like PXA does, taken from the manual */ +#define STA2X11_GPIO0 0 +#define STA2X11_GPIO1 1 +#define STA2X11_GPIO2 2 +#define STA2X11_GPIO3 3 +#define STA2X11_GPIO4 4 +#define STA2X11_GPIO5 5 +#define STA2X11_GPIO6 6 +#define STA2X11_GPIO7 7 +#define STA2X11_GPIO8_RGBOUT_RED7 8 +#define STA2X11_GPIO9_RGBOUT_RED6 9 +#define STA2X11_GPIO10_RGBOUT_RED5 10 +#define STA2X11_GPIO11_RGBOUT_RED4 11 +#define STA2X11_GPIO12_RGBOUT_RED3 12 +#define STA2X11_GPIO13_RGBOUT_RED2 13 +#define STA2X11_GPIO14_RGBOUT_RED1 14 +#define STA2X11_GPIO15_RGBOUT_RED0 15 +#define STA2X11_GPIO16_RGBOUT_GREEN7 16 +#define STA2X11_GPIO17_RGBOUT_GREEN6 17 +#define STA2X11_GPIO18_RGBOUT_GREEN5 18 +#define STA2X11_GPIO19_RGBOUT_GREEN4 19 +#define STA2X11_GPIO20_RGBOUT_GREEN3 20 +#define STA2X11_GPIO21_RGBOUT_GREEN2 21 +#define STA2X11_GPIO22_RGBOUT_GREEN1 22 +#define STA2X11_GPIO23_RGBOUT_GREEN0 23 +#define STA2X11_GPIO24_RGBOUT_BLUE7 24 +#define STA2X11_GPIO25_RGBOUT_BLUE6 25 +#define STA2X11_GPIO26_RGBOUT_BLUE5 26 +#define STA2X11_GPIO27_RGBOUT_BLUE4 27 +#define STA2X11_GPIO28_RGBOUT_BLUE3 28 +#define STA2X11_GPIO29_RGBOUT_BLUE2 29 +#define STA2X11_GPIO30_RGBOUT_BLUE1 30 +#define STA2X11_GPIO31_RGBOUT_BLUE0 31 +#define STA2X11_GPIO32_RGBOUT_VSYNCH 32 +#define STA2X11_GPIO33_RGBOUT_HSYNCH 33 +#define STA2X11_GPIO34_RGBOUT_DEN 34 +#define STA2X11_GPIO35_ETH_CRS_DV 35 +#define STA2X11_GPIO36_ETH_TXD1 36 +#define STA2X11_GPIO37_ETH_TXD0 37 +#define STA2X11_GPIO38_ETH_TX_EN 38 +#define STA2X11_GPIO39_MDIO 39 +#define STA2X11_GPIO40_ETH_REF_CLK 40 +#define STA2X11_GPIO41_ETH_RXD1 41 +#define STA2X11_GPIO42_ETH_RXD0 42 +#define STA2X11_GPIO43_MDC 43 +#define STA2X11_GPIO44_CAN_TX 44 +#define STA2X11_GPIO45_CAN_RX 45 +#define STA2X11_GPIO46_MLB_DAT 46 +#define STA2X11_GPIO47_MLB_SIG 47 +#define STA2X11_GPIO48_SPI0_CLK 48 +#define STA2X11_GPIO49_SPI0_TXD 49 +#define STA2X11_GPIO50_SPI0_RXD 50 +#define STA2X11_GPIO51_SPI0_FRM 51 +#define STA2X11_GPIO52_SPI1_CLK 52 +#define STA2X11_GPIO53_SPI1_TXD 53 +#define STA2X11_GPIO54_SPI1_RXD 54 +#define STA2X11_GPIO55_SPI1_FRM 55 +#define STA2X11_GPIO56_SPI2_CLK 56 +#define STA2X11_GPIO57_SPI2_TXD 57 +#define STA2X11_GPIO58_SPI2_RXD 58 +#define STA2X11_GPIO59_SPI2_FRM 59 +#define STA2X11_GPIO60_I2C0_SCL 60 +#define STA2X11_GPIO61_I2C0_SDA 61 +#define STA2X11_GPIO62_I2C1_SCL 62 +#define STA2X11_GPIO63_I2C1_SDA 63 +#define STA2X11_GPIO64_I2C2_SCL 64 +#define STA2X11_GPIO65_I2C2_SDA 65 +#define STA2X11_GPIO66_I2C3_SCL 66 +#define STA2X11_GPIO67_I2C3_SDA 67 +#define STA2X11_GPIO68_MSP0_RCK 68 +#define STA2X11_GPIO69_MSP0_RXD 69 +#define STA2X11_GPIO70_MSP0_RFS 70 +#define STA2X11_GPIO71_MSP0_TCK 71 +#define STA2X11_GPIO72_MSP0_TXD 72 +#define STA2X11_GPIO73_MSP0_TFS 73 +#define STA2X11_GPIO74_MSP0_SCK 74 +#define STA2X11_GPIO75_MSP1_CK 75 +#define STA2X11_GPIO76_MSP1_RXD 76 +#define STA2X11_GPIO77_MSP1_FS 77 +#define STA2X11_GPIO78_MSP1_TXD 78 +#define STA2X11_GPIO79_MSP2_CK 79 +#define STA2X11_GPIO80_MSP2_RXD 80 +#define STA2X11_GPIO81_MSP2_FS 81 +#define STA2X11_GPIO82_MSP2_TXD 82 +#define STA2X11_GPIO83_MSP3_CK 83 +#define STA2X11_GPIO84_MSP3_RXD 84 +#define STA2X11_GPIO85_MSP3_FS 85 +#define STA2X11_GPIO86_MSP3_TXD 86 +#define STA2X11_GPIO87_MSP4_CK 87 +#define STA2X11_GPIO88_MSP4_RXD 88 +#define STA2X11_GPIO89_MSP4_FS 89 +#define STA2X11_GPIO90_MSP4_TXD 90 +#define STA2X11_GPIO91_MSP5_CK 91 +#define STA2X11_GPIO92_MSP5_RXD 92 +#define STA2X11_GPIO93_MSP5_FS 93 +#define STA2X11_GPIO94_MSP5_TXD 94 +#define STA2X11_GPIO95_SDIO3_DAT3 95 +#define STA2X11_GPIO96_SDIO3_DAT2 96 +#define STA2X11_GPIO97_SDIO3_DAT1 97 +#define STA2X11_GPIO98_SDIO3_DAT0 98 +#define STA2X11_GPIO99_SDIO3_CLK 99 +#define STA2X11_GPIO100_SDIO3_CMD 100 +#define STA2X11_GPIO101 101 +#define STA2X11_GPIO102 102 +#define STA2X11_GPIO103 103 +#define STA2X11_GPIO104 104 +#define STA2X11_GPIO105_SDIO2_DAT3 105 +#define STA2X11_GPIO106_SDIO2_DAT2 106 +#define STA2X11_GPIO107_SDIO2_DAT1 107 +#define STA2X11_GPIO108_SDIO2_DAT0 108 +#define STA2X11_GPIO109_SDIO2_CLK 109 +#define STA2X11_GPIO110_SDIO2_CMD 110 +#define STA2X11_GPIO111 111 +#define STA2X11_GPIO112 112 +#define STA2X11_GPIO113 113 +#define STA2X11_GPIO114 114 +#define STA2X11_GPIO115_SDIO1_DAT3 115 +#define STA2X11_GPIO116_SDIO1_DAT2 116 +#define STA2X11_GPIO117_SDIO1_DAT1 117 +#define STA2X11_GPIO118_SDIO1_DAT0 118 +#define STA2X11_GPIO119_SDIO1_CLK 119 +#define STA2X11_GPIO120_SDIO1_CMD 120 +#define STA2X11_GPIO121 121 +#define STA2X11_GPIO122 122 +#define STA2X11_GPIO123 123 +#define STA2X11_GPIO124 124 +#define STA2X11_GPIO125_UART2_TXD 125 +#define STA2X11_GPIO126_UART2_RXD 126 +#define STA2X11_GPIO127_UART3_TXD 127 + +/* + * The APB bridge has its own registers, needed by our users as well. + * They are accessed with the following read/mask/write function. + */ +static inline u32 +sta2x11_apbreg_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val) +{ + return __sta2x11_mfd_mask(pdev, reg, mask, val, sta2x11_apbreg); +} + +/* CAN and MLB */ +#define APBREG_BSR 0x00 /* Bridge Status Reg */ +#define APBREG_PAER 0x08 /* Peripherals Address Error Reg */ +#define APBREG_PWAC 0x20 /* Peripheral Write Access Control reg */ +#define APBREG_PRAC 0x40 /* Peripheral Read Access Control reg */ +#define APBREG_PCG 0x60 /* Peripheral Clock Gating Reg */ +#define APBREG_PUR 0x80 /* Peripheral Under Reset Reg */ +#define APBREG_EMU_PCG 0xA0 /* Emulator Peripheral Clock Gating Reg */ + +#define APBREG_CAN (1 << 1) +#define APBREG_MLB (1 << 3) + +/* SARAC */ +#define APBREG_BSR_SARAC 0x100 /* Bridge Status Reg */ +#define APBREG_PAER_SARAC 0x108 /* Peripherals Address Error Reg */ +#define APBREG_PWAC_SARAC 0x120 /* Peripheral Write Access Control reg */ +#define APBREG_PRAC_SARAC 0x140 /* Peripheral Read Access Control reg */ +#define APBREG_PCG_SARAC 0x160 /* Peripheral Clock Gating Reg */ +#define APBREG_PUR_SARAC 0x180 /* Peripheral Under Reset Reg */ +#define APBREG_EMU_PCG_SARAC 0x1A0 /* Emulator Peripheral Clock Gating Reg */ + +#define APBREG_SARAC (1 << 2) + +/* + * The system controller has its own registers. Some of these are accessed + * by out users as well, using the following read/mask/write/function + */ +static inline +u32 sta2x11_sctl_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val) +{ + return __sta2x11_mfd_mask(pdev, reg, mask, val, sta2x11_sctl); +} + +#define SCTL_SCCTL 0x00 /* System controller control register */ +#define SCTL_ARMCFG 0x04 /* ARM configuration register */ +#define SCTL_SCPLLCTL 0x08 /* PLL control status register */ + +#define SCTL_SCPLLCTL_AUDIO_PLL_PD BIT(1) +#define SCTL_SCPLLCTL_FRAC_CONTROL BIT(3) +#define SCTL_SCPLLCTL_STRB_BYPASS BIT(6) +#define SCTL_SCPLLCTL_STRB_INPUT BIT(8) + +#define SCTL_SCPLLFCTRL 0x0c /* PLL frequency control register */ + +#define SCTL_SCPLLFCTRL_AUDIO_PLL_NDIV_MASK 0xff +#define SCTL_SCPLLFCTRL_AUDIO_PLL_NDIV_SHIFT 10 +#define SCTL_SCPLLFCTRL_AUDIO_PLL_IDF_MASK 7 +#define SCTL_SCPLLFCTRL_AUDIO_PLL_IDF_SHIFT 21 +#define SCTL_SCPLLFCTRL_AUDIO_PLL_ODF_MASK 7 +#define SCTL_SCPLLFCTRL_AUDIO_PLL_ODF_SHIFT 18 +#define SCTL_SCPLLFCTRL_DITHER_DISABLE_MASK 0x03 +#define SCTL_SCPLLFCTRL_DITHER_DISABLE_SHIFT 4 + + +#define SCTL_SCRESFRACT 0x10 /* PLL fractional input register */ + +#define SCTL_SCRESFRACT_MASK 0x0000ffff + + +#define SCTL_SCRESCTRL1 0x14 /* Peripheral reset control 1 */ +#define SCTL_SCRESXTRL2 0x18 /* Peripheral reset control 2 */ +#define SCTL_SCPEREN0 0x1c /* Peripheral clock enable register 0 */ +#define SCTL_SCPEREN1 0x20 /* Peripheral clock enable register 1 */ +#define SCTL_SCPEREN2 0x24 /* Peripheral clock enable register 2 */ +#define SCTL_SCGRST 0x28 /* Peripheral global reset */ +#define SCTL_SCPCIECSBRST 0x2c /* PCIe PAB CSB reset status register */ +#define SCTL_SCPCIPMCR1 0x30 /* PCI power management control 1 */ +#define SCTL_SCPCIPMCR2 0x34 /* PCI power management control 2 */ +#define SCTL_SCPCIPMSR1 0x38 /* PCI power management status 1 */ +#define SCTL_SCPCIPMSR2 0x3c /* PCI power management status 2 */ +#define SCTL_SCPCIPMSR3 0x40 /* PCI power management status 3 */ +#define SCTL_SCINTREN 0x44 /* Interrupt enable */ +#define SCTL_SCRISR 0x48 /* RAW interrupt status */ +#define SCTL_SCCLKSTAT0 0x4c /* Peripheral clocks status 0 */ +#define SCTL_SCCLKSTAT1 0x50 /* Peripheral clocks status 1 */ +#define SCTL_SCCLKSTAT2 0x54 /* Peripheral clocks status 2 */ +#define SCTL_SCRSTSTA 0x58 /* Reset status register */ + +#define SCTL_SCRESCTRL1_USB_PHY_POR (1 << 0) +#define SCTL_SCRESCTRL1_USB_OTG (1 << 1) +#define SCTL_SCRESCTRL1_USB_HRST (1 << 2) +#define SCTL_SCRESCTRL1_USB_PHY_HOST (1 << 3) +#define SCTL_SCRESCTRL1_SATAII (1 << 4) +#define SCTL_SCRESCTRL1_VIP (1 << 5) +#define SCTL_SCRESCTRL1_PER_MMC0 (1 << 6) +#define SCTL_SCRESCTRL1_PER_MMC1 (1 << 7) +#define SCTL_SCRESCTRL1_PER_GPIO0 (1 << 8) +#define SCTL_SCRESCTRL1_PER_GPIO1 (1 << 9) +#define SCTL_SCRESCTRL1_PER_GPIO2 (1 << 10) +#define SCTL_SCRESCTRL1_PER_GPIO3 (1 << 11) +#define SCTL_SCRESCTRL1_PER_MTU0 (1 << 12) +#define SCTL_SCRESCTRL1_KER_SPI0 (1 << 13) +#define SCTL_SCRESCTRL1_KER_SPI1 (1 << 14) +#define SCTL_SCRESCTRL1_KER_SPI2 (1 << 15) +#define SCTL_SCRESCTRL1_KER_MCI0 (1 << 16) +#define SCTL_SCRESCTRL1_KER_MCI1 (1 << 17) +#define SCTL_SCRESCTRL1_PRE_HSI2C0 (1 << 18) +#define SCTL_SCRESCTRL1_PER_HSI2C1 (1 << 19) +#define SCTL_SCRESCTRL1_PER_HSI2C2 (1 << 20) +#define SCTL_SCRESCTRL1_PER_HSI2C3 (1 << 21) +#define SCTL_SCRESCTRL1_PER_MSP0 (1 << 22) +#define SCTL_SCRESCTRL1_PER_MSP1 (1 << 23) +#define SCTL_SCRESCTRL1_PER_MSP2 (1 << 24) +#define SCTL_SCRESCTRL1_PER_MSP3 (1 << 25) +#define SCTL_SCRESCTRL1_PER_MSP4 (1 << 26) +#define SCTL_SCRESCTRL1_PER_MSP5 (1 << 27) +#define SCTL_SCRESCTRL1_PER_MMC (1 << 28) +#define SCTL_SCRESCTRL1_KER_MSP0 (1 << 29) +#define SCTL_SCRESCTRL1_KER_MSP1 (1 << 30) +#define SCTL_SCRESCTRL1_KER_MSP2 (1 << 31) + +#define SCTL_SCPEREN0_UART0 (1 << 0) +#define SCTL_SCPEREN0_UART1 (1 << 1) +#define SCTL_SCPEREN0_UART2 (1 << 2) +#define SCTL_SCPEREN0_UART3 (1 << 3) +#define SCTL_SCPEREN0_MSP0 (1 << 4) +#define SCTL_SCPEREN0_MSP1 (1 << 5) +#define SCTL_SCPEREN0_MSP2 (1 << 6) +#define SCTL_SCPEREN0_MSP3 (1 << 7) +#define SCTL_SCPEREN0_MSP4 (1 << 8) +#define SCTL_SCPEREN0_MSP5 (1 << 9) +#define SCTL_SCPEREN0_SPI0 (1 << 10) +#define SCTL_SCPEREN0_SPI1 (1 << 11) +#define SCTL_SCPEREN0_SPI2 (1 << 12) +#define SCTL_SCPEREN0_I2C0 (1 << 13) +#define SCTL_SCPEREN0_I2C1 (1 << 14) +#define SCTL_SCPEREN0_I2C2 (1 << 15) +#define SCTL_SCPEREN0_I2C3 (1 << 16) +#define SCTL_SCPEREN0_SVDO_LVDS (1 << 17) +#define SCTL_SCPEREN0_USB_HOST (1 << 18) +#define SCTL_SCPEREN0_USB_OTG (1 << 19) +#define SCTL_SCPEREN0_MCI0 (1 << 20) +#define SCTL_SCPEREN0_MCI1 (1 << 21) +#define SCTL_SCPEREN0_MCI2 (1 << 22) +#define SCTL_SCPEREN0_MCI3 (1 << 23) +#define SCTL_SCPEREN0_SATA (1 << 24) +#define SCTL_SCPEREN0_ETHERNET (1 << 25) +#define SCTL_SCPEREN0_VIC (1 << 26) +#define SCTL_SCPEREN0_DMA_AUDIO (1 << 27) +#define SCTL_SCPEREN0_DMA_SOC (1 << 28) +#define SCTL_SCPEREN0_RAM (1 << 29) +#define SCTL_SCPEREN0_VIP (1 << 30) +#define SCTL_SCPEREN0_ARM (1 << 31) + +#define SCTL_SCPEREN1_UART0 (1 << 0) +#define SCTL_SCPEREN1_UART1 (1 << 1) +#define SCTL_SCPEREN1_UART2 (1 << 2) +#define SCTL_SCPEREN1_UART3 (1 << 3) +#define SCTL_SCPEREN1_MSP0 (1 << 4) +#define SCTL_SCPEREN1_MSP1 (1 << 5) +#define SCTL_SCPEREN1_MSP2 (1 << 6) +#define SCTL_SCPEREN1_MSP3 (1 << 7) +#define SCTL_SCPEREN1_MSP4 (1 << 8) +#define SCTL_SCPEREN1_MSP5 (1 << 9) +#define SCTL_SCPEREN1_SPI0 (1 << 10) +#define SCTL_SCPEREN1_SPI1 (1 << 11) +#define SCTL_SCPEREN1_SPI2 (1 << 12) +#define SCTL_SCPEREN1_I2C0 (1 << 13) +#define SCTL_SCPEREN1_I2C1 (1 << 14) +#define SCTL_SCPEREN1_I2C2 (1 << 15) +#define SCTL_SCPEREN1_I2C3 (1 << 16) +#define SCTL_SCPEREN1_USB_PHY (1 << 17) + +/* + * APB-SOC registers + */ +static inline +u32 sta2x11_apb_soc_regs_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val) +{ + return __sta2x11_mfd_mask(pdev, reg, mask, val, sta2x11_apb_soc_regs); +} + +#define PCIE_EP1_FUNC3_0_INTR_REG 0x000 +#define PCIE_EP1_FUNC7_4_INTR_REG 0x004 +#define PCIE_EP2_FUNC3_0_INTR_REG 0x008 +#define PCIE_EP2_FUNC7_4_INTR_REG 0x00c +#define PCIE_EP3_FUNC3_0_INTR_REG 0x010 +#define PCIE_EP3_FUNC7_4_INTR_REG 0x014 +#define PCIE_EP4_FUNC3_0_INTR_REG 0x018 +#define PCIE_EP4_FUNC7_4_INTR_REG 0x01c +#define PCIE_INTR_ENABLE0_REG 0x020 +#define PCIE_INTR_ENABLE1_REG 0x024 +#define PCIE_EP1_FUNC_TC_REG 0x028 +#define PCIE_EP2_FUNC_TC_REG 0x02c +#define PCIE_EP3_FUNC_TC_REG 0x030 +#define PCIE_EP4_FUNC_TC_REG 0x034 +#define PCIE_EP1_FUNC_F_REG 0x038 +#define PCIE_EP2_FUNC_F_REG 0x03c +#define PCIE_EP3_FUNC_F_REG 0x040 +#define PCIE_EP4_FUNC_F_REG 0x044 +#define PCIE_PAB_AMBA_SW_RST_REG 0x048 +#define PCIE_PM_STATUS_0_PORT_0_4 0x04c +#define PCIE_PM_STATUS_7_0_EP1 0x050 +#define PCIE_PM_STATUS_7_0_EP2 0x054 +#define PCIE_PM_STATUS_7_0_EP3 0x058 +#define PCIE_PM_STATUS_7_0_EP4 0x05c +#define PCIE_DEV_ID_0_EP1_REG 0x060 +#define PCIE_CC_REV_ID_0_EP1_REG 0x064 +#define PCIE_DEV_ID_1_EP1_REG 0x068 +#define PCIE_CC_REV_ID_1_EP1_REG 0x06c +#define PCIE_DEV_ID_2_EP1_REG 0x070 +#define PCIE_CC_REV_ID_2_EP1_REG 0x074 +#define PCIE_DEV_ID_3_EP1_REG 0x078 +#define PCIE_CC_REV_ID_3_EP1_REG 0x07c +#define PCIE_DEV_ID_4_EP1_REG 0x080 +#define PCIE_CC_REV_ID_4_EP1_REG 0x084 +#define PCIE_DEV_ID_5_EP1_REG 0x088 +#define PCIE_CC_REV_ID_5_EP1_REG 0x08c +#define PCIE_DEV_ID_6_EP1_REG 0x090 +#define PCIE_CC_REV_ID_6_EP1_REG 0x094 +#define PCIE_DEV_ID_7_EP1_REG 0x098 +#define PCIE_CC_REV_ID_7_EP1_REG 0x09c +#define PCIE_DEV_ID_0_EP2_REG 0x0a0 +#define PCIE_CC_REV_ID_0_EP2_REG 0x0a4 +#define PCIE_DEV_ID_1_EP2_REG 0x0a8 +#define PCIE_CC_REV_ID_1_EP2_REG 0x0ac +#define PCIE_DEV_ID_2_EP2_REG 0x0b0 +#define PCIE_CC_REV_ID_2_EP2_REG 0x0b4 +#define PCIE_DEV_ID_3_EP2_REG 0x0b8 +#define PCIE_CC_REV_ID_3_EP2_REG 0x0bc +#define PCIE_DEV_ID_4_EP2_REG 0x0c0 +#define PCIE_CC_REV_ID_4_EP2_REG 0x0c4 +#define PCIE_DEV_ID_5_EP2_REG 0x0c8 +#define PCIE_CC_REV_ID_5_EP2_REG 0x0cc +#define PCIE_DEV_ID_6_EP2_REG 0x0d0 +#define PCIE_CC_REV_ID_6_EP2_REG 0x0d4 +#define PCIE_DEV_ID_7_EP2_REG 0x0d8 +#define PCIE_CC_REV_ID_7_EP2_REG 0x0dC +#define PCIE_DEV_ID_0_EP3_REG 0x0e0 +#define PCIE_CC_REV_ID_0_EP3_REG 0x0e4 +#define PCIE_DEV_ID_1_EP3_REG 0x0e8 +#define PCIE_CC_REV_ID_1_EP3_REG 0x0ec +#define PCIE_DEV_ID_2_EP3_REG 0x0f0 +#define PCIE_CC_REV_ID_2_EP3_REG 0x0f4 +#define PCIE_DEV_ID_3_EP3_REG 0x0f8 +#define PCIE_CC_REV_ID_3_EP3_REG 0x0fc +#define PCIE_DEV_ID_4_EP3_REG 0x100 +#define PCIE_CC_REV_ID_4_EP3_REG 0x104 +#define PCIE_DEV_ID_5_EP3_REG 0x108 +#define PCIE_CC_REV_ID_5_EP3_REG 0x10c +#define PCIE_DEV_ID_6_EP3_REG 0x110 +#define PCIE_CC_REV_ID_6_EP3_REG 0x114 +#define PCIE_DEV_ID_7_EP3_REG 0x118 +#define PCIE_CC_REV_ID_7_EP3_REG 0x11c +#define PCIE_DEV_ID_0_EP4_REG 0x120 +#define PCIE_CC_REV_ID_0_EP4_REG 0x124 +#define PCIE_DEV_ID_1_EP4_REG 0x128 +#define PCIE_CC_REV_ID_1_EP4_REG 0x12c +#define PCIE_DEV_ID_2_EP4_REG 0x130 +#define PCIE_CC_REV_ID_2_EP4_REG 0x134 +#define PCIE_DEV_ID_3_EP4_REG 0x138 +#define PCIE_CC_REV_ID_3_EP4_REG 0x13c +#define PCIE_DEV_ID_4_EP4_REG 0x140 +#define PCIE_CC_REV_ID_4_EP4_REG 0x144 +#define PCIE_DEV_ID_5_EP4_REG 0x148 +#define PCIE_CC_REV_ID_5_EP4_REG 0x14c +#define PCIE_DEV_ID_6_EP4_REG 0x150 +#define PCIE_CC_REV_ID_6_EP4_REG 0x154 +#define PCIE_DEV_ID_7_EP4_REG 0x158 +#define PCIE_CC_REV_ID_7_EP4_REG 0x15c +#define PCIE_SUBSYS_VEN_ID_REG 0x160 +#define PCIE_COMMON_CLOCK_CONFIG_0_4_0 0x164 +#define PCIE_MIPHYP_SSC_EN_REG 0x168 +#define PCIE_MIPHYP_ADDR_REG 0x16c +#define PCIE_L1_ASPM_READY_REG 0x170 +#define PCIE_EXT_CFG_RDY_REG 0x174 +#define PCIE_SoC_INT_ROUTER_STATUS0_REG 0x178 +#define PCIE_SoC_INT_ROUTER_STATUS1_REG 0x17c +#define PCIE_SoC_INT_ROUTER_STATUS2_REG 0x180 +#define PCIE_SoC_INT_ROUTER_STATUS3_REG 0x184 +#define DMA_IP_CTRL_REG 0x324 +#define DISP_BRIDGE_PU_PD_CTRL_REG 0x328 +#define VIP_PU_PD_CTRL_REG 0x32c +#define USB_MLB_PU_PD_CTRL_REG 0x330 +#define SDIO_PU_PD_MISCFUNC_CTRL_REG1 0x334 +#define SDIO_PU_PD_MISCFUNC_CTRL_REG2 0x338 +#define UART_PU_PD_CTRL_REG 0x33c +#define ARM_Lock 0x340 +#define SYS_IO_CHAR_REG1 0x344 +#define SYS_IO_CHAR_REG2 0x348 +#define SATA_CORE_ID_REG 0x34c +#define SATA_CTRL_REG 0x350 +#define I2C_HSFIX_MISC_REG 0x354 +#define SPARE2_RESERVED 0x358 +#define SPARE3_RESERVED 0x35c +#define MASTER_LOCK_REG 0x368 +#define SYSTEM_CONFIG_STATUS_REG 0x36c +#define MSP_CLK_CTRL_REG 0x39c +#define COMPENSATION_REG1 0x3c4 +#define COMPENSATION_REG2 0x3c8 +#define COMPENSATION_REG3 0x3cc +#define TEST_CTL_REG 0x3d0 + +/* + * SECR (OTP) registers + */ +#define STA2X11_SECR_CR 0x00 +#define STA2X11_SECR_FVR0 0x10 +#define STA2X11_SECR_FVR1 0x14 + +extern int sta2x11_mfd_get_regs_data(struct platform_device *pdev, + enum sta2x11_mfd_plat_dev index, + void __iomem **regs, + spinlock_t **lock); + +#endif /* __STA2X11_MFD_H */ |