diff options
Diffstat (limited to 'include/linux/spi')
26 files changed, 2850 insertions, 0 deletions
diff --git a/include/linux/spi/ad7877.h b/include/linux/spi/ad7877.h new file mode 100644 index 000000000..b7be843c8 --- /dev/null +++ b/include/linux/spi/ad7877.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* linux/spi/ad7877.h */ + +/* Touchscreen characteristics vary between boards and models. The + * platform_data for the device's "struct device" holds this information. + * + * It's OK if the min/max values are zero. + */ +struct ad7877_platform_data { + u16 model; /* 7877 */ + u16 vref_delay_usecs; /* 0 for external vref; etc */ + u16 x_plate_ohms; + u16 y_plate_ohms; + + u16 x_min, x_max; + u16 y_min, y_max; + u16 pressure_min, pressure_max; + + u8 stopacq_polarity; /* 1 = Active HIGH, 0 = Active LOW */ + u8 first_conversion_delay; /* 0 = 0.5us, 1 = 128us, 2 = 1ms, 3 = 8ms */ + u8 acquisition_time; /* 0 = 2us, 1 = 4us, 2 = 8us, 3 = 16us */ + u8 averaging; /* 0 = 1, 1 = 4, 2 = 8, 3 = 16 */ + u8 pen_down_acc_interval; /* 0 = covert once, 1 = every 0.5 ms, + 2 = ever 1 ms, 3 = every 8 ms,*/ +}; diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h new file mode 100644 index 000000000..a04c1c34c --- /dev/null +++ b/include/linux/spi/ads7846.h @@ -0,0 +1,45 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* linux/spi/ads7846.h */ + +struct ads7846_platform_data { + u16 model; /* 7843, 7845, 7846, 7873. */ + u16 vref_delay_usecs; /* 0 for external vref; etc */ + u16 vref_mv; /* external vref value, milliVolts + * ads7846: if 0, use internal vref */ + bool keep_vref_on; /* set to keep vref on for differential + * measurements as well */ + bool swap_xy; /* swap x and y axes */ + + /* Settling time of the analog signals; a function of Vcc and the + * capacitance on the X/Y drivers. If set to non-zero, two samples + * are taken with settle_delay us apart, and the second one is used. + * ~150 uSec with 0.01uF caps. + */ + u16 settle_delay_usecs; + + /* If set to non-zero, after samples are taken this delay is applied + * and penirq is rechecked, to help avoid false events. This value + * is affected by the material used to build the touch layer. + */ + u16 penirq_recheck_delay_usecs; + + u16 x_plate_ohms; + u16 y_plate_ohms; + + u16 x_min, x_max; + u16 y_min, y_max; + u16 pressure_min, pressure_max; + + u16 debounce_max; /* max number of additional readings + * per sample */ + u16 debounce_tol; /* tolerance used for filtering */ + u16 debounce_rep; /* additional consecutive good readings + * required after the first two */ + int gpio_pendown_debounce; /* platform specific debounce time for + * the gpio_pendown */ + int (*get_pendown_state)(void); + void (*wait_for_sync)(void); + bool wakeup; + unsigned long irq_flags; +}; + diff --git a/include/linux/spi/altera.h b/include/linux/spi/altera.h new file mode 100644 index 000000000..3b74c3750 --- /dev/null +++ b/include/linux/spi/altera.h @@ -0,0 +1,50 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Header File for Altera SPI Driver. + */ +#ifndef __LINUX_SPI_ALTERA_H +#define __LINUX_SPI_ALTERA_H + +#include <linux/interrupt.h> +#include <linux/regmap.h> +#include <linux/spi/spi.h> +#include <linux/types.h> + +#define ALTERA_SPI_MAX_CS 32 + +/** + * struct altera_spi_platform_data - Platform data of the Altera SPI driver + * @mode_bits: Mode bits of SPI host. + * @num_chipselect: Number of chipselects. + * @bits_per_word_mask: bitmask of supported bits_per_word for transfers. + * @num_devices: Number of devices that shall be added when the driver + * is probed. + * @devices: The devices to add. + */ +struct altera_spi_platform_data { + u16 mode_bits; + u16 num_chipselect; + u32 bits_per_word_mask; + u16 num_devices; + struct spi_board_info *devices; +}; + +struct altera_spi { + int irq; + int len; + int count; + int bytes_per_word; + u32 imr; + + /* data buffers */ + const unsigned char *tx; + unsigned char *rx; + + struct regmap *regmap; + u32 regoff; + struct device *dev; +}; + +extern irqreturn_t altera_spi_irq(int irq, void *dev); +extern void altera_spi_init_host(struct spi_controller *host); +#endif /* __LINUX_SPI_ALTERA_H */ diff --git a/include/linux/spi/at73c213.h b/include/linux/spi/at73c213.h new file mode 100644 index 000000000..cbca6654a --- /dev/null +++ b/include/linux/spi/at73c213.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Board-specific data used to set up AT73c213 audio DAC driver. + */ + +#ifndef __LINUX_SPI_AT73C213_H +#define __LINUX_SPI_AT73C213_H + +/** + * at73c213_board_info - how the external DAC is wired to the device. + * + * @ssc_id: SSC platform_driver id the DAC shall use to stream the audio. + * @dac_clk: the external clock used to provide master clock to the DAC. + * @shortname: a short discription for the DAC, seen by userspace tools. + * + * This struct contains the configuration of the hardware connection to the + * external DAC. The DAC needs a master clock and a I2S audio stream. It also + * provides a name which is used to identify it in userspace tools. + */ +struct at73c213_board_info { + int ssc_id; + struct clk *dac_clk; + char shortname[32]; +}; + +#endif /* __LINUX_SPI_AT73C213_H */ diff --git a/include/linux/spi/corgi_lcd.h b/include/linux/spi/corgi_lcd.h new file mode 100644 index 000000000..fc6c1515d --- /dev/null +++ b/include/linux/spi/corgi_lcd.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __LINUX_SPI_CORGI_LCD_H +#define __LINUX_SPI_CORGI_LCD_H + +#define CORGI_LCD_MODE_QVGA 1 +#define CORGI_LCD_MODE_VGA 2 + +struct corgi_lcd_platform_data { + int init_mode; + int max_intensity; + int default_intensity; + int limit_mask; + + void (*notify)(int intensity); + void (*kick_battery)(void); +}; + +void corgi_lcd_limit_intensity(int limit); + +#endif /* __LINUX_SPI_CORGI_LCD_H */ diff --git a/include/linux/spi/ds1305.h b/include/linux/spi/ds1305.h new file mode 100644 index 000000000..82db6cd15 --- /dev/null +++ b/include/linux/spi/ds1305.h @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __LINUX_SPI_DS1305_H +#define __LINUX_SPI_DS1305_H + +/* + * One-time configuration for ds1305 and ds1306 RTC chips. + * + * Put a pointer to this in spi_board_info.platform_data if you want to + * be sure that Linux (re)initializes this as needed ... after losing + * backup power, and potentially on the first boot. + */ +struct ds1305_platform_data { + + /* Trickle charge configuration: it's OK to leave out the MAGIC + * bitmask; mask in either DS1 or DS2, and then one of 2K/4k/8K. + */ +#define DS1305_TRICKLE_MAGIC 0xa0 +#define DS1305_TRICKLE_DS2 0x08 /* two diodes */ +#define DS1305_TRICKLE_DS1 0x04 /* one diode */ +#define DS1305_TRICKLE_2K 0x01 /* 2 KOhm resistance */ +#define DS1305_TRICKLE_4K 0x02 /* 4 KOhm resistance */ +#define DS1305_TRICKLE_8K 0x03 /* 8 KOhm resistance */ + u8 trickle; + + /* set only on ds1306 parts */ + bool is_ds1306; + + /* ds1306 only: enable 1 Hz output */ + bool en_1hz; + + /* REVISIT: the driver currently expects nINT0 to be wired + * as the alarm IRQ. ALM1 may also need to be set up ... + */ +}; + +#endif /* __LINUX_SPI_DS1305_H */ diff --git a/include/linux/spi/eeprom.h b/include/linux/spi/eeprom.h new file mode 100644 index 000000000..1cca3dd5a --- /dev/null +++ b/include/linux/spi/eeprom.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __LINUX_SPI_EEPROM_H +#define __LINUX_SPI_EEPROM_H + +#include <linux/memory.h> + +/* + * Put one of these structures in platform_data for SPI EEPROMS handled + * by the "at25" driver. On SPI, most EEPROMS understand the same core + * command set. If you need to support EEPROMs that don't yet fit, add + * flags to support those protocol options. These values all come from + * the chip datasheets. + */ +struct spi_eeprom { + u32 byte_len; + char name[10]; + u32 page_size; /* for writes */ + u16 flags; +#define EE_ADDR1 0x0001 /* 8 bit addrs */ +#define EE_ADDR2 0x0002 /* 16 bit addrs */ +#define EE_ADDR3 0x0004 /* 24 bit addrs */ +#define EE_READONLY 0x0008 /* disallow writes */ + + /* + * Certain EEPROMS have a size that is larger than the number of address + * bytes would allow (e.g. like M95040 from ST that has 512 Byte size + * but uses only one address byte (A0 to A7) for addressing.) For + * the extra address bit (A8, A16 or A24) bit 3 of the instruction byte + * is used. This instruction bit is normally defined as don't care for + * other AT25 like chips. + */ +#define EE_INSTR_BIT3_IS_ADDR 0x0010 + + void *context; +}; + +#endif /* __LINUX_SPI_EEPROM_H */ diff --git a/include/linux/spi/flash.h b/include/linux/spi/flash.h new file mode 100644 index 000000000..2401a0887 --- /dev/null +++ b/include/linux/spi/flash.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef LINUX_SPI_FLASH_H +#define LINUX_SPI_FLASH_H + +struct mtd_partition; + +/** + * struct flash_platform_data: board-specific flash data + * @name: optional flash device name (eg, as used with mtdparts=) + * @parts: optional array of mtd_partitions for static partitioning + * @nr_parts: number of mtd_partitions for static partitioning + * @type: optional flash device type (e.g. m25p80 vs m25p64), for use + * with chips that can't be queried for JEDEC or other IDs + * + * Board init code (in arch/.../mach-xxx/board-yyy.c files) can + * provide information about SPI flash parts (such as DataFlash) to + * help set up the device and its appropriate default partitioning. + * + * Note that for DataFlash, sizes for pages, blocks, and sectors are + * rarely powers of two; and partitions should be sector-aligned. + */ +struct flash_platform_data { + char *name; + struct mtd_partition *parts; + unsigned int nr_parts; + + char *type; + + /* we'll likely add more ... use JEDEC IDs, etc */ +}; + +#endif diff --git a/include/linux/spi/libertas_spi.h b/include/linux/spi/libertas_spi.h new file mode 100644 index 000000000..156326d9b --- /dev/null +++ b/include/linux/spi/libertas_spi.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * board-specific data for the libertas_spi driver. + * + * Copyright 2008 Analog Devices Inc. + */ +#ifndef _LIBERTAS_SPI_H_ +#define _LIBERTAS_SPI_H_ + +struct spi_device; + +struct libertas_spi_platform_data { + /* There are two ways to read data from the WLAN module's SPI + * interface. Setting 0 or 1 here controls which one is used. + * + * Usually you want to set use_dummy_writes = 1. + * However, if that doesn't work or if you are using a slow SPI clock + * speed, you may want to use 0 here. */ + u16 use_dummy_writes; + + /* Board specific setup/teardown */ + int (*setup)(struct spi_device *spi); + int (*teardown)(struct spi_device *spi); +}; +#endif diff --git a/include/linux/spi/max7301.h b/include/linux/spi/max7301.h new file mode 100644 index 000000000..e392c5375 --- /dev/null +++ b/include/linux/spi/max7301.h @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef LINUX_SPI_MAX7301_H +#define LINUX_SPI_MAX7301_H + +#include <linux/gpio/driver.h> + +/* + * Some registers must be read back to modify. + * To save time we cache them here in memory + */ +struct max7301 { + struct mutex lock; + u8 port_config[8]; /* field 0 is unused */ + u32 out_level; /* cached output levels */ + u32 input_pullup_active; + struct gpio_chip chip; + struct device *dev; + int (*write)(struct device *dev, unsigned int reg, unsigned int val); + int (*read)(struct device *dev, unsigned int reg); +}; + +struct max7301_platform_data { + /* number assigned to the first GPIO */ + unsigned base; + /* + * bitmask controlling the pullup configuration, + * + * _note_ the 4 lowest bits are unused, because the first 4 + * ports of the controller are not used, too. + */ + u32 input_pullup_active; +}; + +extern void __max730x_remove(struct device *dev); +extern int __max730x_probe(struct max7301 *ts); +#endif diff --git a/include/linux/spi/mc33880.h b/include/linux/spi/mc33880.h new file mode 100644 index 000000000..205a49cb9 --- /dev/null +++ b/include/linux/spi/mc33880.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef LINUX_SPI_MC33880_H +#define LINUX_SPI_MC33880_H + +struct mc33880_platform_data { + /* number assigned to the first GPIO */ + unsigned base; +}; + +#endif + diff --git a/include/linux/spi/mmc_spi.h b/include/linux/spi/mmc_spi.h new file mode 100644 index 000000000..9ad9a06e4 --- /dev/null +++ b/include/linux/spi/mmc_spi.h @@ -0,0 +1,41 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __LINUX_SPI_MMC_SPI_H +#define __LINUX_SPI_MMC_SPI_H + +#include <linux/spi/spi.h> +#include <linux/interrupt.h> + +struct device; +struct mmc_host; + +/* Put this in platform_data of a device being used to manage an MMC/SD + * card slot. (Modeled after PXA mmc glue; see that for usage examples.) + * + * REVISIT This is not a spi-specific notion. Any card slot should be + * able to handle it. If the MMC core doesn't adopt this kind of notion, + * switch the "struct device *" parameters over to "struct spi_device *". + */ +struct mmc_spi_platform_data { + /* driver activation and (optional) card detect irq hookup */ + int (*init)(struct device *, + irqreturn_t (*)(int, void *), + void *); + void (*exit)(struct device *, void *); + + /* Capabilities to pass into mmc core (e.g. MMC_CAP_NEEDS_POLL). */ + unsigned long caps; + unsigned long caps2; + + /* how long to debounce card detect, in msecs */ + u16 detect_delay; + + /* power management */ + u16 powerup_msecs; /* delay of up to 250 msec */ + u32 ocr_mask; /* available voltages */ + void (*setpower)(struct device *, unsigned int maskval); +}; + +extern struct mmc_spi_platform_data *mmc_spi_get_pdata(struct spi_device *spi); +extern void mmc_spi_put_pdata(struct spi_device *spi); + +#endif /* __LINUX_SPI_MMC_SPI_H */ diff --git a/include/linux/spi/mxs-spi.h b/include/linux/spi/mxs-spi.h new file mode 100644 index 000000000..3c57d5e56 --- /dev/null +++ b/include/linux/spi/mxs-spi.h @@ -0,0 +1,135 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * include/linux/spi/mxs-spi.h + * + * Freescale i.MX233/i.MX28 SPI controller register definition + * + * Copyright 2008 Embedded Alley Solutions, Inc. + * Copyright 2009-2011 Freescale Semiconductor, Inc. + */ + +#ifndef __LINUX_SPI_MXS_SPI_H__ +#define __LINUX_SPI_MXS_SPI_H__ + +#include <linux/dmaengine.h> + +#define ssp_is_old(host) ((host)->devid == IMX23_SSP) + +/* SSP registers */ +#define HW_SSP_CTRL0 0x000 +#define BM_SSP_CTRL0_RUN (1 << 29) +#define BM_SSP_CTRL0_SDIO_IRQ_CHECK (1 << 28) +#define BM_SSP_CTRL0_LOCK_CS (1 << 27) +#define BM_SSP_CTRL0_IGNORE_CRC (1 << 26) +#define BM_SSP_CTRL0_READ (1 << 25) +#define BM_SSP_CTRL0_DATA_XFER (1 << 24) +#define BP_SSP_CTRL0_BUS_WIDTH 22 +#define BM_SSP_CTRL0_BUS_WIDTH (0x3 << 22) +#define BM_SSP_CTRL0_WAIT_FOR_IRQ (1 << 21) +#define BM_SSP_CTRL0_WAIT_FOR_CMD (1 << 20) +#define BM_SSP_CTRL0_LONG_RESP (1 << 19) +#define BM_SSP_CTRL0_GET_RESP (1 << 17) +#define BM_SSP_CTRL0_ENABLE (1 << 16) +#define BP_SSP_CTRL0_XFER_COUNT 0 +#define BM_SSP_CTRL0_XFER_COUNT 0xffff +#define HW_SSP_CMD0 0x010 +#define BM_SSP_CMD0_DBL_DATA_RATE_EN (1 << 25) +#define BM_SSP_CMD0_SLOW_CLKING_EN (1 << 22) +#define BM_SSP_CMD0_CONT_CLKING_EN (1 << 21) +#define BM_SSP_CMD0_APPEND_8CYC (1 << 20) +#define BP_SSP_CMD0_BLOCK_SIZE 16 +#define BM_SSP_CMD0_BLOCK_SIZE (0xf << 16) +#define BP_SSP_CMD0_BLOCK_COUNT 8 +#define BM_SSP_CMD0_BLOCK_COUNT (0xff << 8) +#define BP_SSP_CMD0_CMD 0 +#define BM_SSP_CMD0_CMD 0xff +#define HW_SSP_CMD1 0x020 +#define HW_SSP_XFER_SIZE 0x030 +#define HW_SSP_BLOCK_SIZE 0x040 +#define BP_SSP_BLOCK_SIZE_BLOCK_COUNT 4 +#define BM_SSP_BLOCK_SIZE_BLOCK_COUNT (0xffffff << 4) +#define BP_SSP_BLOCK_SIZE_BLOCK_SIZE 0 +#define BM_SSP_BLOCK_SIZE_BLOCK_SIZE 0xf +#define HW_SSP_TIMING(h) (ssp_is_old(h) ? 0x050 : 0x070) +#define BP_SSP_TIMING_TIMEOUT 16 +#define BM_SSP_TIMING_TIMEOUT (0xffff << 16) +#define BP_SSP_TIMING_CLOCK_DIVIDE 8 +#define BM_SSP_TIMING_CLOCK_DIVIDE (0xff << 8) +#define BF_SSP_TIMING_CLOCK_DIVIDE(v) \ + (((v) << 8) & BM_SSP_TIMING_CLOCK_DIVIDE) +#define BP_SSP_TIMING_CLOCK_RATE 0 +#define BM_SSP_TIMING_CLOCK_RATE 0xff +#define BF_SSP_TIMING_CLOCK_RATE(v) \ + (((v) << 0) & BM_SSP_TIMING_CLOCK_RATE) +#define HW_SSP_CTRL1(h) (ssp_is_old(h) ? 0x060 : 0x080) +#define BM_SSP_CTRL1_SDIO_IRQ (1 << 31) +#define BM_SSP_CTRL1_SDIO_IRQ_EN (1 << 30) +#define BM_SSP_CTRL1_RESP_ERR_IRQ (1 << 29) +#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN (1 << 28) +#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ (1 << 27) +#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN (1 << 26) +#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ (1 << 25) +#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN (1 << 24) +#define BM_SSP_CTRL1_DATA_CRC_IRQ (1 << 23) +#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN (1 << 22) +#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ (1 << 21) +#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ_EN (1 << 20) +#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ (1 << 17) +#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN (1 << 16) +#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ (1 << 15) +#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ_EN (1 << 14) +#define BM_SSP_CTRL1_DMA_ENABLE (1 << 13) +#define BM_SSP_CTRL1_PHASE (1 << 10) +#define BM_SSP_CTRL1_POLARITY (1 << 9) +#define BP_SSP_CTRL1_WORD_LENGTH 4 +#define BM_SSP_CTRL1_WORD_LENGTH (0xf << 4) +#define BF_SSP_CTRL1_WORD_LENGTH(v) \ + (((v) << 4) & BM_SSP_CTRL1_WORD_LENGTH) +#define BV_SSP_CTRL1_WORD_LENGTH__FOUR_BITS 0x3 +#define BV_SSP_CTRL1_WORD_LENGTH__EIGHT_BITS 0x7 +#define BV_SSP_CTRL1_WORD_LENGTH__SIXTEEN_BITS 0xF +#define BP_SSP_CTRL1_SSP_MODE 0 +#define BM_SSP_CTRL1_SSP_MODE 0xf +#define BF_SSP_CTRL1_SSP_MODE(v) \ + (((v) << 0) & BM_SSP_CTRL1_SSP_MODE) +#define BV_SSP_CTRL1_SSP_MODE__SPI 0x0 +#define BV_SSP_CTRL1_SSP_MODE__SSI 0x1 +#define BV_SSP_CTRL1_SSP_MODE__SD_MMC 0x3 +#define BV_SSP_CTRL1_SSP_MODE__MS 0x4 + +#define HW_SSP_DATA(h) (ssp_is_old(h) ? 0x070 : 0x090) + +#define HW_SSP_SDRESP0(h) (ssp_is_old(h) ? 0x080 : 0x0a0) +#define HW_SSP_SDRESP1(h) (ssp_is_old(h) ? 0x090 : 0x0b0) +#define HW_SSP_SDRESP2(h) (ssp_is_old(h) ? 0x0a0 : 0x0c0) +#define HW_SSP_SDRESP3(h) (ssp_is_old(h) ? 0x0b0 : 0x0d0) +#define HW_SSP_STATUS(h) (ssp_is_old(h) ? 0x0c0 : 0x100) +#define BM_SSP_STATUS_CARD_DETECT (1 << 28) +#define BM_SSP_STATUS_SDIO_IRQ (1 << 17) +#define BM_SSP_STATUS_FIFO_EMPTY (1 << 5) + +#define BF_SSP(value, field) (((value) << BP_SSP_##field) & BM_SSP_##field) + +#define SSP_PIO_NUM 3 + +enum mxs_ssp_id { + IMX23_SSP, + IMX28_SSP, +}; + +struct mxs_ssp { + struct device *dev; + void __iomem *base; + struct clk *clk; + unsigned int clk_rate; + enum mxs_ssp_id devid; + + struct dma_chan *dmach; + unsigned int dma_dir; + enum dma_transfer_direction slave_dirn; + u32 ssp_pio_words[SSP_PIO_NUM]; +}; + +void mxs_ssp_set_clk_rate(struct mxs_ssp *ssp, unsigned int rate); + +#endif /* __LINUX_SPI_MXS_SPI_H__ */ diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h new file mode 100644 index 000000000..0916cb9bc --- /dev/null +++ b/include/linux/spi/pxa2xx_spi.h @@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs + */ +#ifndef __LINUX_SPI_PXA2XX_SPI_H +#define __LINUX_SPI_PXA2XX_SPI_H + +#include <linux/types.h> + +#include <linux/pxa2xx_ssp.h> + +struct dma_chan; + +/* + * The platform data for SSP controller devices + * (resides in device.platform_data). + */ +struct pxa2xx_spi_controller { + u16 num_chipselect; + u8 enable_dma; + u8 dma_burst_size; + bool is_target; + + /* DMA engine specific config */ + bool (*dma_filter)(struct dma_chan *chan, void *param); + void *tx_param; + void *rx_param; + + /* For non-PXA arches */ + struct ssp_device ssp; +}; + +/* + * The controller specific data for SPI target devices + * (resides in spi_board_info.controller_data), + * copied to spi_device.platform_data ... mostly for + * DMA tuning. + */ +struct pxa2xx_spi_chip { + u8 tx_threshold; + u8 tx_hi_threshold; + u8 rx_threshold; + u8 dma_burst_size; + u32 timeout; +}; + +#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP) + +#include <linux/clk.h> + +extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_controller *info); + +#endif + +#endif /* __LINUX_SPI_PXA2XX_SPI_H */ diff --git a/include/linux/spi/rspi.h b/include/linux/spi/rspi.h new file mode 100644 index 000000000..dbdfcc7a3 --- /dev/null +++ b/include/linux/spi/rspi.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Renesas SPI driver + * + * Copyright (C) 2012 Renesas Solutions Corp. + */ + +#ifndef __LINUX_SPI_RENESAS_SPI_H__ +#define __LINUX_SPI_RENESAS_SPI_H__ + +struct rspi_plat_data { + unsigned int dma_tx_id; + unsigned int dma_rx_id; + + u16 num_chipselect; +}; + +#endif diff --git a/include/linux/spi/sh_hspi.h b/include/linux/spi/sh_hspi.h new file mode 100644 index 000000000..02f36b2f3 --- /dev/null +++ b/include/linux/spi/sh_hspi.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2011 Kuninori Morimoto + */ +#ifndef SH_HSPI_H +#define SH_HSPI_H + +struct sh_hspi_info { +}; + +#endif diff --git a/include/linux/spi/sh_msiof.h b/include/linux/spi/sh_msiof.h new file mode 100644 index 000000000..f950d2804 --- /dev/null +++ b/include/linux/spi/sh_msiof.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __SPI_SH_MSIOF_H__ +#define __SPI_SH_MSIOF_H__ + +enum { + MSIOF_SPI_HOST, + MSIOF_SPI_TARGET, +}; + +struct sh_msiof_spi_info { + int tx_fifo_override; + int rx_fifo_override; + u16 num_chipselect; + int mode; + unsigned int dma_tx_id; + unsigned int dma_rx_id; + u32 dtdl; + u32 syncdl; +}; + +#endif /* __SPI_SH_MSIOF_H__ */ diff --git a/include/linux/spi/spi-fsl-dspi.h b/include/linux/spi/spi-fsl-dspi.h new file mode 100644 index 000000000..02b250aac --- /dev/null +++ b/include/linux/spi/spi-fsl-dspi.h @@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Freescale DSPI controller driver + * + * Copyright (c) 2017 Angelo Dureghello <angelo@sysam.it> + */ + +#ifndef SPI_FSL_DSPI_HEADER_H +#define SPI_FSL_DSPI_HEADER_H + +/** + * struct fsl_dspi_platform_data - platform data for the Freescale DSPI driver + * @bus_num: board specific identifier for this DSPI driver. + * @cs_num: number of chip selects supported by this DSPI driver. + */ +struct fsl_dspi_platform_data { + u32 cs_num; + u32 bus_num; + u32 sck_cs_delay; + u32 cs_sck_delay; +}; + +#endif /* SPI_FSL_DSPI_HEADER_H */ diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h new file mode 100644 index 000000000..6b0a7dc48 --- /dev/null +++ b/include/linux/spi/spi-mem.h @@ -0,0 +1,408 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2018 Exceet Electronics GmbH + * Copyright (C) 2018 Bootlin + * + * Author: + * Peter Pan <peterpandong@micron.com> + * Boris Brezillon <boris.brezillon@bootlin.com> + */ + +#ifndef __LINUX_SPI_MEM_H +#define __LINUX_SPI_MEM_H + +#include <linux/spi/spi.h> + +#define SPI_MEM_OP_CMD(__opcode, __buswidth) \ + { \ + .buswidth = __buswidth, \ + .opcode = __opcode, \ + .nbytes = 1, \ + } + +#define SPI_MEM_OP_ADDR(__nbytes, __val, __buswidth) \ + { \ + .nbytes = __nbytes, \ + .val = __val, \ + .buswidth = __buswidth, \ + } + +#define SPI_MEM_OP_NO_ADDR { } + +#define SPI_MEM_OP_DUMMY(__nbytes, __buswidth) \ + { \ + .nbytes = __nbytes, \ + .buswidth = __buswidth, \ + } + +#define SPI_MEM_OP_NO_DUMMY { } + +#define SPI_MEM_OP_DATA_IN(__nbytes, __buf, __buswidth) \ + { \ + .dir = SPI_MEM_DATA_IN, \ + .nbytes = __nbytes, \ + .buf.in = __buf, \ + .buswidth = __buswidth, \ + } + +#define SPI_MEM_OP_DATA_OUT(__nbytes, __buf, __buswidth) \ + { \ + .dir = SPI_MEM_DATA_OUT, \ + .nbytes = __nbytes, \ + .buf.out = __buf, \ + .buswidth = __buswidth, \ + } + +#define SPI_MEM_OP_NO_DATA { } + +/** + * enum spi_mem_data_dir - describes the direction of a SPI memory data + * transfer from the controller perspective + * @SPI_MEM_NO_DATA: no data transferred + * @SPI_MEM_DATA_IN: data coming from the SPI memory + * @SPI_MEM_DATA_OUT: data sent to the SPI memory + */ +enum spi_mem_data_dir { + SPI_MEM_NO_DATA, + SPI_MEM_DATA_IN, + SPI_MEM_DATA_OUT, +}; + +/** + * struct spi_mem_op - describes a SPI memory operation + * @cmd.nbytes: number of opcode bytes (only 1 or 2 are valid). The opcode is + * sent MSB-first. + * @cmd.buswidth: number of IO lines used to transmit the command + * @cmd.opcode: operation opcode + * @cmd.dtr: whether the command opcode should be sent in DTR mode or not + * @addr.nbytes: number of address bytes to send. Can be zero if the operation + * does not need to send an address + * @addr.buswidth: number of IO lines used to transmit the address cycles + * @addr.dtr: whether the address should be sent in DTR mode or not + * @addr.val: address value. This value is always sent MSB first on the bus. + * Note that only @addr.nbytes are taken into account in this + * address value, so users should make sure the value fits in the + * assigned number of bytes. + * @dummy.nbytes: number of dummy bytes to send after an opcode or address. Can + * be zero if the operation does not require dummy bytes + * @dummy.buswidth: number of IO lanes used to transmit the dummy bytes + * @dummy.dtr: whether the dummy bytes should be sent in DTR mode or not + * @data.buswidth: number of IO lanes used to send/receive the data + * @data.dtr: whether the data should be sent in DTR mode or not + * @data.ecc: whether error correction is required or not + * @data.dir: direction of the transfer + * @data.nbytes: number of data bytes to send/receive. Can be zero if the + * operation does not involve transferring data + * @data.buf.in: input buffer (must be DMA-able) + * @data.buf.out: output buffer (must be DMA-able) + */ +struct spi_mem_op { + struct { + u8 nbytes; + u8 buswidth; + u8 dtr : 1; + u8 __pad : 7; + u16 opcode; + } cmd; + + struct { + u8 nbytes; + u8 buswidth; + u8 dtr : 1; + u8 __pad : 7; + u64 val; + } addr; + + struct { + u8 nbytes; + u8 buswidth; + u8 dtr : 1; + u8 __pad : 7; + } dummy; + + struct { + u8 buswidth; + u8 dtr : 1; + u8 ecc : 1; + u8 __pad : 6; + enum spi_mem_data_dir dir; + unsigned int nbytes; + union { + void *in; + const void *out; + } buf; + } data; +}; + +#define SPI_MEM_OP(__cmd, __addr, __dummy, __data) \ + { \ + .cmd = __cmd, \ + .addr = __addr, \ + .dummy = __dummy, \ + .data = __data, \ + } + +/** + * struct spi_mem_dirmap_info - Direct mapping information + * @op_tmpl: operation template that should be used by the direct mapping when + * the memory device is accessed + * @offset: absolute offset this direct mapping is pointing to + * @length: length in byte of this direct mapping + * + * These information are used by the controller specific implementation to know + * the portion of memory that is directly mapped and the spi_mem_op that should + * be used to access the device. + * A direct mapping is only valid for one direction (read or write) and this + * direction is directly encoded in the ->op_tmpl.data.dir field. + */ +struct spi_mem_dirmap_info { + struct spi_mem_op op_tmpl; + u64 offset; + u64 length; +}; + +/** + * struct spi_mem_dirmap_desc - Direct mapping descriptor + * @mem: the SPI memory device this direct mapping is attached to + * @info: information passed at direct mapping creation time + * @nodirmap: set to 1 if the SPI controller does not implement + * ->mem_ops->dirmap_create() or when this function returned an + * error. If @nodirmap is true, all spi_mem_dirmap_{read,write}() + * calls will use spi_mem_exec_op() to access the memory. This is a + * degraded mode that allows spi_mem drivers to use the same code + * no matter whether the controller supports direct mapping or not + * @priv: field pointing to controller specific data + * + * Common part of a direct mapping descriptor. This object is created by + * spi_mem_dirmap_create() and controller implementation of ->create_dirmap() + * can create/attach direct mapping resources to the descriptor in the ->priv + * field. + */ +struct spi_mem_dirmap_desc { + struct spi_mem *mem; + struct spi_mem_dirmap_info info; + unsigned int nodirmap; + void *priv; +}; + +/** + * struct spi_mem - describes a SPI memory device + * @spi: the underlying SPI device + * @drvpriv: spi_mem_driver private data + * @name: name of the SPI memory device + * + * Extra information that describe the SPI memory device and may be needed by + * the controller to properly handle this device should be placed here. + * + * One example would be the device size since some controller expose their SPI + * mem devices through a io-mapped region. + */ +struct spi_mem { + struct spi_device *spi; + void *drvpriv; + const char *name; +}; + +/** + * struct spi_mem_set_drvdata() - attach driver private data to a SPI mem + * device + * @mem: memory device + * @data: data to attach to the memory device + */ +static inline void spi_mem_set_drvdata(struct spi_mem *mem, void *data) +{ + mem->drvpriv = data; +} + +/** + * struct spi_mem_get_drvdata() - get driver private data attached to a SPI mem + * device + * @mem: memory device + * + * Return: the data attached to the mem device. + */ +static inline void *spi_mem_get_drvdata(struct spi_mem *mem) +{ + return mem->drvpriv; +} + +/** + * struct spi_controller_mem_ops - SPI memory operations + * @adjust_op_size: shrink the data xfer of an operation to match controller's + * limitations (can be alignment or max RX/TX size + * limitations) + * @supports_op: check if an operation is supported by the controller + * @exec_op: execute a SPI memory operation + * @get_name: get a custom name for the SPI mem device from the controller. + * This might be needed if the controller driver has been ported + * to use the SPI mem layer and a custom name is used to keep + * mtdparts compatible. + * Note that if the implementation of this function allocates memory + * dynamically, then it should do so with devm_xxx(), as we don't + * have a ->free_name() function. + * @dirmap_create: create a direct mapping descriptor that can later be used to + * access the memory device. This method is optional + * @dirmap_destroy: destroy a memory descriptor previous created by + * ->dirmap_create() + * @dirmap_read: read data from the memory device using the direct mapping + * created by ->dirmap_create(). The function can return less + * data than requested (for example when the request is crossing + * the currently mapped area), and the caller of + * spi_mem_dirmap_read() is responsible for calling it again in + * this case. + * @dirmap_write: write data to the memory device using the direct mapping + * created by ->dirmap_create(). The function can return less + * data than requested (for example when the request is crossing + * the currently mapped area), and the caller of + * spi_mem_dirmap_write() is responsible for calling it again in + * this case. + * @poll_status: poll memory device status until (status & mask) == match or + * when the timeout has expired. It fills the data buffer with + * the last status value. + * + * This interface should be implemented by SPI controllers providing an + * high-level interface to execute SPI memory operation, which is usually the + * case for QSPI controllers. + * + * Note on ->dirmap_{read,write}(): drivers should avoid accessing the direct + * mapping from the CPU because doing that can stall the CPU waiting for the + * SPI mem transaction to finish, and this will make real-time maintainers + * unhappy and might make your system less reactive. Instead, drivers should + * use DMA to access this direct mapping. + */ +struct spi_controller_mem_ops { + int (*adjust_op_size)(struct spi_mem *mem, struct spi_mem_op *op); + bool (*supports_op)(struct spi_mem *mem, + const struct spi_mem_op *op); + int (*exec_op)(struct spi_mem *mem, + const struct spi_mem_op *op); + const char *(*get_name)(struct spi_mem *mem); + int (*dirmap_create)(struct spi_mem_dirmap_desc *desc); + void (*dirmap_destroy)(struct spi_mem_dirmap_desc *desc); + ssize_t (*dirmap_read)(struct spi_mem_dirmap_desc *desc, + u64 offs, size_t len, void *buf); + ssize_t (*dirmap_write)(struct spi_mem_dirmap_desc *desc, + u64 offs, size_t len, const void *buf); + int (*poll_status)(struct spi_mem *mem, + const struct spi_mem_op *op, + u16 mask, u16 match, + unsigned long initial_delay_us, + unsigned long polling_rate_us, + unsigned long timeout_ms); +}; + +/** + * struct spi_controller_mem_caps - SPI memory controller capabilities + * @dtr: Supports DTR operations + * @ecc: Supports operations with error correction + */ +struct spi_controller_mem_caps { + bool dtr; + bool ecc; +}; + +#define spi_mem_controller_is_capable(ctlr, cap) \ + ((ctlr)->mem_caps && (ctlr)->mem_caps->cap) + +/** + * struct spi_mem_driver - SPI memory driver + * @spidrv: inherit from a SPI driver + * @probe: probe a SPI memory. Usually where detection/initialization takes + * place + * @remove: remove a SPI memory + * @shutdown: take appropriate action when the system is shutdown + * + * This is just a thin wrapper around a spi_driver. The core takes care of + * allocating the spi_mem object and forwarding the probe/remove/shutdown + * request to the spi_mem_driver. The reason we use this wrapper is because + * we might have to stuff more information into the spi_mem struct to let + * SPI controllers know more about the SPI memory they interact with, and + * having this intermediate layer allows us to do that without adding more + * useless fields to the spi_device object. + */ +struct spi_mem_driver { + struct spi_driver spidrv; + int (*probe)(struct spi_mem *mem); + int (*remove)(struct spi_mem *mem); + void (*shutdown)(struct spi_mem *mem); +}; + +#if IS_ENABLED(CONFIG_SPI_MEM) +int spi_controller_dma_map_mem_op_data(struct spi_controller *ctlr, + const struct spi_mem_op *op, + struct sg_table *sg); + +void spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr, + const struct spi_mem_op *op, + struct sg_table *sg); + +bool spi_mem_default_supports_op(struct spi_mem *mem, + const struct spi_mem_op *op); +#else +static inline int +spi_controller_dma_map_mem_op_data(struct spi_controller *ctlr, + const struct spi_mem_op *op, + struct sg_table *sg) +{ + return -ENOTSUPP; +} + +static inline void +spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr, + const struct spi_mem_op *op, + struct sg_table *sg) +{ +} + +static inline +bool spi_mem_default_supports_op(struct spi_mem *mem, + const struct spi_mem_op *op) +{ + return false; +} +#endif /* CONFIG_SPI_MEM */ + +int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op); + +bool spi_mem_supports_op(struct spi_mem *mem, + const struct spi_mem_op *op); + +int spi_mem_exec_op(struct spi_mem *mem, + const struct spi_mem_op *op); + +const char *spi_mem_get_name(struct spi_mem *mem); + +struct spi_mem_dirmap_desc * +spi_mem_dirmap_create(struct spi_mem *mem, + const struct spi_mem_dirmap_info *info); +void spi_mem_dirmap_destroy(struct spi_mem_dirmap_desc *desc); +ssize_t spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc, + u64 offs, size_t len, void *buf); +ssize_t spi_mem_dirmap_write(struct spi_mem_dirmap_desc *desc, + u64 offs, size_t len, const void *buf); +struct spi_mem_dirmap_desc * +devm_spi_mem_dirmap_create(struct device *dev, struct spi_mem *mem, + const struct spi_mem_dirmap_info *info); +void devm_spi_mem_dirmap_destroy(struct device *dev, + struct spi_mem_dirmap_desc *desc); + +int spi_mem_poll_status(struct spi_mem *mem, + const struct spi_mem_op *op, + u16 mask, u16 match, + unsigned long initial_delay_us, + unsigned long polling_delay_us, + u16 timeout_ms); + +int spi_mem_driver_register_with_owner(struct spi_mem_driver *drv, + struct module *owner); + +void spi_mem_driver_unregister(struct spi_mem_driver *drv); + +#define spi_mem_driver_register(__drv) \ + spi_mem_driver_register_with_owner(__drv, THIS_MODULE) + +#define module_spi_mem_driver(__drv) \ + module_driver(__drv, spi_mem_driver_register, \ + spi_mem_driver_unregister) + +#endif /* __LINUX_SPI_MEM_H */ diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h new file mode 100644 index 000000000..8cc7a9992 --- /dev/null +++ b/include/linux/spi/spi.h @@ -0,0 +1,1656 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later + * + * Copyright (C) 2005 David Brownell + */ + +#ifndef __LINUX_SPI_H +#define __LINUX_SPI_H + +#include <linux/acpi.h> +#include <linux/bits.h> +#include <linux/completion.h> +#include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/kthread.h> +#include <linux/mod_devicetable.h> +#include <linux/overflow.h> +#include <linux/scatterlist.h> +#include <linux/slab.h> +#include <linux/u64_stats_sync.h> + +#include <uapi/linux/spi/spi.h> + +struct dma_chan; +struct software_node; +struct ptp_system_timestamp; +struct spi_controller; +struct spi_transfer; +struct spi_controller_mem_ops; +struct spi_controller_mem_caps; +struct spi_message; + +/* + * INTERFACES between SPI master-side drivers and SPI slave protocol handlers, + * and SPI infrastructure. + */ +extern struct bus_type spi_bus_type; + +/** + * struct spi_statistics - statistics for spi transfers + * @syncp: seqcount to protect members in this struct for per-cpu update + * on 32-bit systems + * + * @messages: number of spi-messages handled + * @transfers: number of spi_transfers handled + * @errors: number of errors during spi_transfer + * @timedout: number of timeouts during spi_transfer + * + * @spi_sync: number of times spi_sync is used + * @spi_sync_immediate: + * number of times spi_sync is executed immediately + * in calling context without queuing and scheduling + * @spi_async: number of times spi_async is used + * + * @bytes: number of bytes transferred to/from device + * @bytes_tx: number of bytes sent to device + * @bytes_rx: number of bytes received from device + * + * @transfer_bytes_histo: + * transfer bytes histogram + * + * @transfers_split_maxsize: + * number of transfers that have been split because of + * maxsize limit + */ +struct spi_statistics { + struct u64_stats_sync syncp; + + u64_stats_t messages; + u64_stats_t transfers; + u64_stats_t errors; + u64_stats_t timedout; + + u64_stats_t spi_sync; + u64_stats_t spi_sync_immediate; + u64_stats_t spi_async; + + u64_stats_t bytes; + u64_stats_t bytes_rx; + u64_stats_t bytes_tx; + +#define SPI_STATISTICS_HISTO_SIZE 17 + u64_stats_t transfer_bytes_histo[SPI_STATISTICS_HISTO_SIZE]; + + u64_stats_t transfers_split_maxsize; +}; + +#define SPI_STATISTICS_ADD_TO_FIELD(pcpu_stats, field, count) \ + do { \ + struct spi_statistics *__lstats; \ + get_cpu(); \ + __lstats = this_cpu_ptr(pcpu_stats); \ + u64_stats_update_begin(&__lstats->syncp); \ + u64_stats_add(&__lstats->field, count); \ + u64_stats_update_end(&__lstats->syncp); \ + put_cpu(); \ + } while (0) + +#define SPI_STATISTICS_INCREMENT_FIELD(pcpu_stats, field) \ + do { \ + struct spi_statistics *__lstats; \ + get_cpu(); \ + __lstats = this_cpu_ptr(pcpu_stats); \ + u64_stats_update_begin(&__lstats->syncp); \ + u64_stats_inc(&__lstats->field); \ + u64_stats_update_end(&__lstats->syncp); \ + put_cpu(); \ + } while (0) + +/** + * struct spi_delay - SPI delay information + * @value: Value for the delay + * @unit: Unit for the delay + */ +struct spi_delay { +#define SPI_DELAY_UNIT_USECS 0 +#define SPI_DELAY_UNIT_NSECS 1 +#define SPI_DELAY_UNIT_SCK 2 + u16 value; + u8 unit; +}; + +extern int spi_delay_to_ns(struct spi_delay *_delay, struct spi_transfer *xfer); +extern int spi_delay_exec(struct spi_delay *_delay, struct spi_transfer *xfer); +extern void spi_transfer_cs_change_delay_exec(struct spi_message *msg, + struct spi_transfer *xfer); + +/** + * struct spi_device - Controller side proxy for an SPI slave device + * @dev: Driver model representation of the device. + * @controller: SPI controller used with the device. + * @master: Copy of controller, for backwards compatibility. + * @max_speed_hz: Maximum clock rate to be used with this chip + * (on this board); may be changed by the device's driver. + * The spi_transfer.speed_hz can override this for each transfer. + * @chip_select: Chipselect, distinguishing chips handled by @controller. + * @mode: The spi mode defines how data is clocked out and in. + * This may be changed by the device's driver. + * The "active low" default for chipselect mode can be overridden + * (by specifying SPI_CS_HIGH) as can the "MSB first" default for + * each word in a transfer (by specifying SPI_LSB_FIRST). + * @bits_per_word: Data transfers involve one or more words; word sizes + * like eight or 12 bits are common. In-memory wordsizes are + * powers of two bytes (e.g. 20 bit samples use 32 bits). + * This may be changed by the device's driver, or left at the + * default (0) indicating protocol words are eight bit bytes. + * The spi_transfer.bits_per_word can override this for each transfer. + * @rt: Make the pump thread real time priority. + * @irq: Negative, or the number passed to request_irq() to receive + * interrupts from this device. + * @controller_state: Controller's runtime state + * @controller_data: Board-specific definitions for controller, such as + * FIFO initialization parameters; from board_info.controller_data + * @modalias: Name of the driver to use with this device, or an alias + * for that name. This appears in the sysfs "modalias" attribute + * for driver coldplugging, and in uevents used for hotplugging + * @driver_override: If the name of a driver is written to this attribute, then + * the device will bind to the named driver and only the named driver. + * Do not set directly, because core frees it; use driver_set_override() to + * set or clear it. + * @cs_gpiod: GPIO descriptor of the chipselect line (optional, NULL when + * not using a GPIO line) + * @word_delay: delay to be inserted between consecutive + * words of a transfer + * @cs_setup: delay to be introduced by the controller after CS is asserted + * @cs_hold: delay to be introduced by the controller before CS is deasserted + * @cs_inactive: delay to be introduced by the controller after CS is + * deasserted. If @cs_change_delay is used from @spi_transfer, then the + * two delays will be added up. + * @pcpu_statistics: statistics for the spi_device + * + * A @spi_device is used to interchange data between an SPI slave + * (usually a discrete chip) and CPU memory. + * + * In @dev, the platform_data is used to hold information about this + * device that's meaningful to the device's protocol driver, but not + * to its controller. One example might be an identifier for a chip + * variant with slightly different functionality; another might be + * information about how this particular board wires the chip's pins. + */ +struct spi_device { + struct device dev; + struct spi_controller *controller; + struct spi_controller *master; /* Compatibility layer */ + u32 max_speed_hz; + u8 chip_select; + u8 bits_per_word; + bool rt; +#define SPI_NO_TX BIT(31) /* No transmit wire */ +#define SPI_NO_RX BIT(30) /* No receive wire */ + /* + * TPM specification defines flow control over SPI. Client device + * can insert a wait state on MISO when address is transmitted by + * controller on MOSI. Detecting the wait state in software is only + * possible for full duplex controllers. For controllers that support + * only half-duplex, the wait state detection needs to be implemented + * in hardware. TPM devices would set this flag when hardware flow + * control is expected from SPI controller. + */ +#define SPI_TPM_HW_FLOW BIT(29) /* TPM HW flow control */ + /* + * All bits defined above should be covered by SPI_MODE_KERNEL_MASK. + * The SPI_MODE_KERNEL_MASK has the SPI_MODE_USER_MASK counterpart, + * which is defined in 'include/uapi/linux/spi/spi.h'. + * The bits defined here are from bit 31 downwards, while in + * SPI_MODE_USER_MASK are from 0 upwards. + * These bits must not overlap. A static assert check should make sure of that. + * If adding extra bits, make sure to decrease the bit index below as well. + */ +#define SPI_MODE_KERNEL_MASK (~(BIT(29) - 1)) + u32 mode; + int irq; + void *controller_state; + void *controller_data; + char modalias[SPI_NAME_SIZE]; + const char *driver_override; + struct gpio_desc *cs_gpiod; /* Chip select GPIO descriptor */ + struct spi_delay word_delay; /* Inter-word delay */ + /* CS delays */ + struct spi_delay cs_setup; + struct spi_delay cs_hold; + struct spi_delay cs_inactive; + + /* The statistics */ + struct spi_statistics __percpu *pcpu_statistics; + + /* + * Likely need more hooks for more protocol options affecting how + * the controller talks to each chip, like: + * - memory packing (12 bit samples into low bits, others zeroed) + * - priority + * - chipselect delays + * - ... + */ +}; + +/* Make sure that SPI_MODE_KERNEL_MASK & SPI_MODE_USER_MASK don't overlap */ +static_assert((SPI_MODE_KERNEL_MASK & SPI_MODE_USER_MASK) == 0, + "SPI_MODE_USER_MASK & SPI_MODE_KERNEL_MASK must not overlap"); + +static inline struct spi_device *to_spi_device(const struct device *dev) +{ + return dev ? container_of(dev, struct spi_device, dev) : NULL; +} + +/* Most drivers won't need to care about device refcounting */ +static inline struct spi_device *spi_dev_get(struct spi_device *spi) +{ + return (spi && get_device(&spi->dev)) ? spi : NULL; +} + +static inline void spi_dev_put(struct spi_device *spi) +{ + if (spi) + put_device(&spi->dev); +} + +/* ctldata is for the bus_controller driver's runtime state */ +static inline void *spi_get_ctldata(const struct spi_device *spi) +{ + return spi->controller_state; +} + +static inline void spi_set_ctldata(struct spi_device *spi, void *state) +{ + spi->controller_state = state; +} + +/* Device driver data */ + +static inline void spi_set_drvdata(struct spi_device *spi, void *data) +{ + dev_set_drvdata(&spi->dev, data); +} + +static inline void *spi_get_drvdata(const struct spi_device *spi) +{ + return dev_get_drvdata(&spi->dev); +} + +static inline u8 spi_get_chipselect(const struct spi_device *spi, u8 idx) +{ + return spi->chip_select; +} + +static inline void spi_set_chipselect(struct spi_device *spi, u8 idx, u8 chipselect) +{ + spi->chip_select = chipselect; +} + +static inline struct gpio_desc *spi_get_csgpiod(const struct spi_device *spi, u8 idx) +{ + return spi->cs_gpiod; +} + +static inline void spi_set_csgpiod(struct spi_device *spi, u8 idx, struct gpio_desc *csgpiod) +{ + spi->cs_gpiod = csgpiod; +} + +/** + * struct spi_driver - Host side "protocol" driver + * @id_table: List of SPI devices supported by this driver + * @probe: Binds this driver to the SPI device. Drivers can verify + * that the device is actually present, and may need to configure + * characteristics (such as bits_per_word) which weren't needed for + * the initial configuration done during system setup. + * @remove: Unbinds this driver from the SPI device + * @shutdown: Standard shutdown callback used during system state + * transitions such as powerdown/halt and kexec + * @driver: SPI device drivers should initialize the name and owner + * field of this structure. + * + * This represents the kind of device driver that uses SPI messages to + * interact with the hardware at the other end of a SPI link. It's called + * a "protocol" driver because it works through messages rather than talking + * directly to SPI hardware (which is what the underlying SPI controller + * driver does to pass those messages). These protocols are defined in the + * specification for the device(s) supported by the driver. + * + * As a rule, those device protocols represent the lowest level interface + * supported by a driver, and it will support upper level interfaces too. + * Examples of such upper levels include frameworks like MTD, networking, + * MMC, RTC, filesystem character device nodes, and hardware monitoring. + */ +struct spi_driver { + const struct spi_device_id *id_table; + int (*probe)(struct spi_device *spi); + void (*remove)(struct spi_device *spi); + void (*shutdown)(struct spi_device *spi); + struct device_driver driver; +}; + +static inline struct spi_driver *to_spi_driver(struct device_driver *drv) +{ + return drv ? container_of(drv, struct spi_driver, driver) : NULL; +} + +extern int __spi_register_driver(struct module *owner, struct spi_driver *sdrv); + +/** + * spi_unregister_driver - reverse effect of spi_register_driver + * @sdrv: the driver to unregister + * Context: can sleep + */ +static inline void spi_unregister_driver(struct spi_driver *sdrv) +{ + if (sdrv) + driver_unregister(&sdrv->driver); +} + +extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 chip_select); + +/* Use a define to avoid include chaining to get THIS_MODULE */ +#define spi_register_driver(driver) \ + __spi_register_driver(THIS_MODULE, driver) + +/** + * module_spi_driver() - Helper macro for registering a SPI driver + * @__spi_driver: spi_driver struct + * + * Helper macro for SPI drivers which do not do anything special in module + * init/exit. This eliminates a lot of boilerplate. Each module may only + * use this macro once, and calling it replaces module_init() and module_exit() + */ +#define module_spi_driver(__spi_driver) \ + module_driver(__spi_driver, spi_register_driver, \ + spi_unregister_driver) + +/** + * struct spi_controller - interface to SPI master or slave controller + * @dev: device interface to this driver + * @list: link with the global spi_controller list + * @bus_num: board-specific (and often SOC-specific) identifier for a + * given SPI controller. + * @num_chipselect: chipselects are used to distinguish individual + * SPI slaves, and are numbered from zero to num_chipselects. + * each slave has a chipselect signal, but it's common that not + * every chipselect is connected to a slave. + * @dma_alignment: SPI controller constraint on DMA buffers alignment. + * @mode_bits: flags understood by this controller driver + * @buswidth_override_bits: flags to override for this controller driver + * @bits_per_word_mask: A mask indicating which values of bits_per_word are + * supported by the driver. Bit n indicates that a bits_per_word n+1 is + * supported. If set, the SPI core will reject any transfer with an + * unsupported bits_per_word. If not set, this value is simply ignored, + * and it's up to the individual driver to perform any validation. + * @min_speed_hz: Lowest supported transfer speed + * @max_speed_hz: Highest supported transfer speed + * @flags: other constraints relevant to this driver + * @slave: indicates that this is an SPI slave controller + * @target: indicates that this is an SPI target controller + * @devm_allocated: whether the allocation of this struct is devres-managed + * @max_transfer_size: function that returns the max transfer size for + * a &spi_device; may be %NULL, so the default %SIZE_MAX will be used. + * @max_message_size: function that returns the max message size for + * a &spi_device; may be %NULL, so the default %SIZE_MAX will be used. + * @io_mutex: mutex for physical bus access + * @add_lock: mutex to avoid adding devices to the same chipselect + * @bus_lock_spinlock: spinlock for SPI bus locking + * @bus_lock_mutex: mutex for exclusion of multiple callers + * @bus_lock_flag: indicates that the SPI bus is locked for exclusive use + * @setup: updates the device mode and clocking records used by a + * device's SPI controller; protocol code may call this. This + * must fail if an unrecognized or unsupported mode is requested. + * It's always safe to call this unless transfers are pending on + * the device whose settings are being modified. + * @set_cs_timing: optional hook for SPI devices to request SPI master + * controller for configuring specific CS setup time, hold time and inactive + * delay interms of clock counts + * @transfer: adds a message to the controller's transfer queue. + * @cleanup: frees controller-specific state + * @can_dma: determine whether this controller supports DMA + * @dma_map_dev: device which can be used for DMA mapping + * @cur_rx_dma_dev: device which is currently used for RX DMA mapping + * @cur_tx_dma_dev: device which is currently used for TX DMA mapping + * @queued: whether this controller is providing an internal message queue + * @kworker: pointer to thread struct for message pump + * @pump_messages: work struct for scheduling work to the message pump + * @queue_lock: spinlock to synchronise access to message queue + * @queue: message queue + * @cur_msg: the currently in-flight message + * @cur_msg_completion: a completion for the current in-flight message + * @cur_msg_incomplete: Flag used internally to opportunistically skip + * the @cur_msg_completion. This flag is used to check if the driver has + * already called spi_finalize_current_message(). + * @cur_msg_need_completion: Flag used internally to opportunistically skip + * the @cur_msg_completion. This flag is used to signal the context that + * is running spi_finalize_current_message() that it needs to complete() + * @cur_msg_mapped: message has been mapped for DMA + * @last_cs: the last chip_select that is recorded by set_cs, -1 on non chip + * selected + * @last_cs_mode_high: was (mode & SPI_CS_HIGH) true on the last call to set_cs. + * @xfer_completion: used by core transfer_one_message() + * @busy: message pump is busy + * @running: message pump is running + * @rt: whether this queue is set to run as a realtime task + * @auto_runtime_pm: the core should ensure a runtime PM reference is held + * while the hardware is prepared, using the parent + * device for the spidev + * @max_dma_len: Maximum length of a DMA transfer for the device. + * @prepare_transfer_hardware: a message will soon arrive from the queue + * so the subsystem requests the driver to prepare the transfer hardware + * by issuing this call + * @transfer_one_message: the subsystem calls the driver to transfer a single + * message while queuing transfers that arrive in the meantime. When the + * driver is finished with this message, it must call + * spi_finalize_current_message() so the subsystem can issue the next + * message + * @unprepare_transfer_hardware: there are currently no more messages on the + * queue so the subsystem notifies the driver that it may relax the + * hardware by issuing this call + * + * @set_cs: set the logic level of the chip select line. May be called + * from interrupt context. + * @prepare_message: set up the controller to transfer a single message, + * for example doing DMA mapping. Called from threaded + * context. + * @transfer_one: transfer a single spi_transfer. + * + * - return 0 if the transfer is finished, + * - return 1 if the transfer is still in progress. When + * the driver is finished with this transfer it must + * call spi_finalize_current_transfer() so the subsystem + * can issue the next transfer. Note: transfer_one and + * transfer_one_message are mutually exclusive; when both + * are set, the generic subsystem does not call your + * transfer_one callback. + * @handle_err: the subsystem calls the driver to handle an error that occurs + * in the generic implementation of transfer_one_message(). + * @mem_ops: optimized/dedicated operations for interactions with SPI memory. + * This field is optional and should only be implemented if the + * controller has native support for memory like operations. + * @mem_caps: controller capabilities for the handling of memory operations. + * @unprepare_message: undo any work done by prepare_message(). + * @slave_abort: abort the ongoing transfer request on an SPI slave controller + * @target_abort: abort the ongoing transfer request on an SPI target controller + * @cs_gpiods: Array of GPIO descriptors to use as chip select lines; one per CS + * number. Any individual value may be NULL for CS lines that + * are not GPIOs (driven by the SPI controller itself). + * @use_gpio_descriptors: Turns on the code in the SPI core to parse and grab + * GPIO descriptors. This will fill in @cs_gpiods and SPI devices will have + * the cs_gpiod assigned if a GPIO line is found for the chipselect. + * @unused_native_cs: When cs_gpiods is used, spi_register_controller() will + * fill in this field with the first unused native CS, to be used by SPI + * controller drivers that need to drive a native CS when using GPIO CS. + * @max_native_cs: When cs_gpiods is used, and this field is filled in, + * spi_register_controller() will validate all native CS (including the + * unused native CS) against this value. + * @pcpu_statistics: statistics for the spi_controller + * @dma_tx: DMA transmit channel + * @dma_rx: DMA receive channel + * @dummy_rx: dummy receive buffer for full-duplex devices + * @dummy_tx: dummy transmit buffer for full-duplex devices + * @fw_translate_cs: If the boot firmware uses different numbering scheme + * what Linux expects, this optional hook can be used to translate + * between the two. + * @ptp_sts_supported: If the driver sets this to true, it must provide a + * time snapshot in @spi_transfer->ptp_sts as close as possible to the + * moment in time when @spi_transfer->ptp_sts_word_pre and + * @spi_transfer->ptp_sts_word_post were transmitted. + * If the driver does not set this, the SPI core takes the snapshot as + * close to the driver hand-over as possible. + * @irq_flags: Interrupt enable state during PTP system timestamping + * @fallback: fallback to PIO if DMA transfer return failure with + * SPI_TRANS_FAIL_NO_START. + * @queue_empty: signal green light for opportunistically skipping the queue + * for spi_sync transfers. + * @must_async: disable all fast paths in the core + * + * Each SPI controller can communicate with one or more @spi_device + * children. These make a small bus, sharing MOSI, MISO and SCK signals + * but not chip select signals. Each device may be configured to use a + * different clock rate, since those shared signals are ignored unless + * the chip is selected. + * + * The driver for an SPI controller manages access to those devices through + * a queue of spi_message transactions, copying data between CPU memory and + * an SPI slave device. For each such message it queues, it calls the + * message's completion function when the transaction completes. + */ +struct spi_controller { + struct device dev; + + struct list_head list; + + /* + * Other than negative (== assign one dynamically), bus_num is fully + * board-specific. Usually that simplifies to being SoC-specific. + * example: one SoC has three SPI controllers, numbered 0..2, + * and one board's schematics might show it using SPI-2. Software + * would normally use bus_num=2 for that controller. + */ + s16 bus_num; + + /* + * Chipselects will be integral to many controllers; some others + * might use board-specific GPIOs. + */ + u16 num_chipselect; + + /* Some SPI controllers pose alignment requirements on DMAable + * buffers; let protocol drivers know about these requirements. + */ + u16 dma_alignment; + + /* spi_device.mode flags understood by this controller driver */ + u32 mode_bits; + + /* spi_device.mode flags override flags for this controller */ + u32 buswidth_override_bits; + + /* Bitmask of supported bits_per_word for transfers */ + u32 bits_per_word_mask; +#define SPI_BPW_MASK(bits) BIT((bits) - 1) +#define SPI_BPW_RANGE_MASK(min, max) GENMASK((max) - 1, (min) - 1) + + /* Limits on transfer speed */ + u32 min_speed_hz; + u32 max_speed_hz; + + /* Other constraints relevant to this driver */ + u16 flags; +#define SPI_CONTROLLER_HALF_DUPLEX BIT(0) /* Can't do full duplex */ +#define SPI_CONTROLLER_NO_RX BIT(1) /* Can't do buffer read */ +#define SPI_CONTROLLER_NO_TX BIT(2) /* Can't do buffer write */ +#define SPI_CONTROLLER_MUST_RX BIT(3) /* Requires rx */ +#define SPI_CONTROLLER_MUST_TX BIT(4) /* Requires tx */ +#define SPI_CONTROLLER_GPIO_SS BIT(5) /* GPIO CS must select slave */ +#define SPI_CONTROLLER_SUSPENDED BIT(6) /* Currently suspended */ + + /* Flag indicating if the allocation of this struct is devres-managed */ + bool devm_allocated; + + union { + /* Flag indicating this is an SPI slave controller */ + bool slave; + /* Flag indicating this is an SPI target controller */ + bool target; + }; + + /* + * On some hardware transfer / message size may be constrained + * the limit may depend on device transfer settings. + */ + size_t (*max_transfer_size)(struct spi_device *spi); + size_t (*max_message_size)(struct spi_device *spi); + + /* I/O mutex */ + struct mutex io_mutex; + + /* Used to avoid adding the same CS twice */ + struct mutex add_lock; + + /* Lock and mutex for SPI bus locking */ + spinlock_t bus_lock_spinlock; + struct mutex bus_lock_mutex; + + /* Flag indicating that the SPI bus is locked for exclusive use */ + bool bus_lock_flag; + + /* + * Setup mode and clock, etc (SPI driver may call many times). + * + * IMPORTANT: this may be called when transfers to another + * device are active. DO NOT UPDATE SHARED REGISTERS in ways + * which could break those transfers. + */ + int (*setup)(struct spi_device *spi); + + /* + * set_cs_timing() method is for SPI controllers that supports + * configuring CS timing. + * + * This hook allows SPI client drivers to request SPI controllers + * to configure specific CS timing through spi_set_cs_timing() after + * spi_setup(). + */ + int (*set_cs_timing)(struct spi_device *spi); + + /* + * Bidirectional bulk transfers + * + * + The transfer() method may not sleep; its main role is + * just to add the message to the queue. + * + For now there's no remove-from-queue operation, or + * any other request management + * + To a given spi_device, message queueing is pure FIFO + * + * + The controller's main job is to process its message queue, + * selecting a chip (for masters), then transferring data + * + If there are multiple spi_device children, the i/o queue + * arbitration algorithm is unspecified (round robin, FIFO, + * priority, reservations, preemption, etc) + * + * + Chipselect stays active during the entire message + * (unless modified by spi_transfer.cs_change != 0). + * + The message transfers use clock and SPI mode parameters + * previously established by setup() for this device + */ + int (*transfer)(struct spi_device *spi, + struct spi_message *mesg); + + /* Called on release() to free memory provided by spi_controller */ + void (*cleanup)(struct spi_device *spi); + + /* + * Used to enable core support for DMA handling, if can_dma() + * exists and returns true then the transfer will be mapped + * prior to transfer_one() being called. The driver should + * not modify or store xfer and dma_tx and dma_rx must be set + * while the device is prepared. + */ + bool (*can_dma)(struct spi_controller *ctlr, + struct spi_device *spi, + struct spi_transfer *xfer); + struct device *dma_map_dev; + struct device *cur_rx_dma_dev; + struct device *cur_tx_dma_dev; + + /* + * These hooks are for drivers that want to use the generic + * controller transfer queueing mechanism. If these are used, the + * transfer() function above must NOT be specified by the driver. + * Over time we expect SPI drivers to be phased over to this API. + */ + bool queued; + struct kthread_worker *kworker; + struct kthread_work pump_messages; + spinlock_t queue_lock; + struct list_head queue; + struct spi_message *cur_msg; + struct completion cur_msg_completion; + bool cur_msg_incomplete; + bool cur_msg_need_completion; + bool busy; + bool running; + bool rt; + bool auto_runtime_pm; + bool cur_msg_mapped; + char last_cs; + bool last_cs_mode_high; + bool fallback; + struct completion xfer_completion; + size_t max_dma_len; + + int (*prepare_transfer_hardware)(struct spi_controller *ctlr); + int (*transfer_one_message)(struct spi_controller *ctlr, + struct spi_message *mesg); + int (*unprepare_transfer_hardware)(struct spi_controller *ctlr); + int (*prepare_message)(struct spi_controller *ctlr, + struct spi_message *message); + int (*unprepare_message)(struct spi_controller *ctlr, + struct spi_message *message); + union { + int (*slave_abort)(struct spi_controller *ctlr); + int (*target_abort)(struct spi_controller *ctlr); + }; + + /* + * These hooks are for drivers that use a generic implementation + * of transfer_one_message() provided by the core. + */ + void (*set_cs)(struct spi_device *spi, bool enable); + int (*transfer_one)(struct spi_controller *ctlr, struct spi_device *spi, + struct spi_transfer *transfer); + void (*handle_err)(struct spi_controller *ctlr, + struct spi_message *message); + + /* Optimized handlers for SPI memory-like operations. */ + const struct spi_controller_mem_ops *mem_ops; + const struct spi_controller_mem_caps *mem_caps; + + /* GPIO chip select */ + struct gpio_desc **cs_gpiods; + bool use_gpio_descriptors; + s8 unused_native_cs; + s8 max_native_cs; + + /* Statistics */ + struct spi_statistics __percpu *pcpu_statistics; + + /* DMA channels for use with core dmaengine helpers */ + struct dma_chan *dma_tx; + struct dma_chan *dma_rx; + + /* Dummy data for full duplex devices */ + void *dummy_rx; + void *dummy_tx; + + int (*fw_translate_cs)(struct spi_controller *ctlr, unsigned cs); + + /* + * Driver sets this field to indicate it is able to snapshot SPI + * transfers (needed e.g. for reading the time of POSIX clocks) + */ + bool ptp_sts_supported; + + /* Interrupt enable state during PTP system timestamping */ + unsigned long irq_flags; + + /* Flag for enabling opportunistic skipping of the queue in spi_sync */ + bool queue_empty; + bool must_async; +}; + +static inline void *spi_controller_get_devdata(struct spi_controller *ctlr) +{ + return dev_get_drvdata(&ctlr->dev); +} + +static inline void spi_controller_set_devdata(struct spi_controller *ctlr, + void *data) +{ + dev_set_drvdata(&ctlr->dev, data); +} + +static inline struct spi_controller *spi_controller_get(struct spi_controller *ctlr) +{ + if (!ctlr || !get_device(&ctlr->dev)) + return NULL; + return ctlr; +} + +static inline void spi_controller_put(struct spi_controller *ctlr) +{ + if (ctlr) + put_device(&ctlr->dev); +} + +static inline bool spi_controller_is_slave(struct spi_controller *ctlr) +{ + return IS_ENABLED(CONFIG_SPI_SLAVE) && ctlr->slave; +} + +static inline bool spi_controller_is_target(struct spi_controller *ctlr) +{ + return IS_ENABLED(CONFIG_SPI_SLAVE) && ctlr->target; +} + +/* PM calls that need to be issued by the driver */ +extern int spi_controller_suspend(struct spi_controller *ctlr); +extern int spi_controller_resume(struct spi_controller *ctlr); + +/* Calls the driver make to interact with the message queue */ +extern struct spi_message *spi_get_next_queued_message(struct spi_controller *ctlr); +extern void spi_finalize_current_message(struct spi_controller *ctlr); +extern void spi_finalize_current_transfer(struct spi_controller *ctlr); + +/* Helper calls for driver to timestamp transfer */ +void spi_take_timestamp_pre(struct spi_controller *ctlr, + struct spi_transfer *xfer, + size_t progress, bool irqs_off); +void spi_take_timestamp_post(struct spi_controller *ctlr, + struct spi_transfer *xfer, + size_t progress, bool irqs_off); + +/* The SPI driver core manages memory for the spi_controller classdev */ +extern struct spi_controller *__spi_alloc_controller(struct device *host, + unsigned int size, bool slave); + +static inline struct spi_controller *spi_alloc_master(struct device *host, + unsigned int size) +{ + return __spi_alloc_controller(host, size, false); +} + +static inline struct spi_controller *spi_alloc_slave(struct device *host, + unsigned int size) +{ + if (!IS_ENABLED(CONFIG_SPI_SLAVE)) + return NULL; + + return __spi_alloc_controller(host, size, true); +} + +static inline struct spi_controller *spi_alloc_host(struct device *dev, + unsigned int size) +{ + return __spi_alloc_controller(dev, size, false); +} + +static inline struct spi_controller *spi_alloc_target(struct device *dev, + unsigned int size) +{ + if (!IS_ENABLED(CONFIG_SPI_SLAVE)) + return NULL; + + return __spi_alloc_controller(dev, size, true); +} + +struct spi_controller *__devm_spi_alloc_controller(struct device *dev, + unsigned int size, + bool slave); + +static inline struct spi_controller *devm_spi_alloc_master(struct device *dev, + unsigned int size) +{ + return __devm_spi_alloc_controller(dev, size, false); +} + +static inline struct spi_controller *devm_spi_alloc_slave(struct device *dev, + unsigned int size) +{ + if (!IS_ENABLED(CONFIG_SPI_SLAVE)) + return NULL; + + return __devm_spi_alloc_controller(dev, size, true); +} + +static inline struct spi_controller *devm_spi_alloc_host(struct device *dev, + unsigned int size) +{ + return __devm_spi_alloc_controller(dev, size, false); +} + +static inline struct spi_controller *devm_spi_alloc_target(struct device *dev, + unsigned int size) +{ + if (!IS_ENABLED(CONFIG_SPI_SLAVE)) + return NULL; + + return __devm_spi_alloc_controller(dev, size, true); +} + +extern int spi_register_controller(struct spi_controller *ctlr); +extern int devm_spi_register_controller(struct device *dev, + struct spi_controller *ctlr); +extern void spi_unregister_controller(struct spi_controller *ctlr); + +#if IS_ENABLED(CONFIG_ACPI) +extern struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr, + struct acpi_device *adev, + int index); +int acpi_spi_count_resources(struct acpi_device *adev); +#endif + +/* + * SPI resource management while processing a SPI message + */ + +typedef void (*spi_res_release_t)(struct spi_controller *ctlr, + struct spi_message *msg, + void *res); + +/** + * struct spi_res - SPI resource management structure + * @entry: list entry + * @release: release code called prior to freeing this resource + * @data: extra data allocated for the specific use-case + * + * This is based on ideas from devres, but focused on life-cycle + * management during spi_message processing. + */ +struct spi_res { + struct list_head entry; + spi_res_release_t release; + unsigned long long data[]; /* Guarantee ull alignment */ +}; + +/*---------------------------------------------------------------------------*/ + +/* + * I/O INTERFACE between SPI controller and protocol drivers + * + * Protocol drivers use a queue of spi_messages, each transferring data + * between the controller and memory buffers. + * + * The spi_messages themselves consist of a series of read+write transfer + * segments. Those segments always read the same number of bits as they + * write; but one or the other is easily ignored by passing a NULL buffer + * pointer. (This is unlike most types of I/O API, because SPI hardware + * is full duplex.) + * + * NOTE: Allocation of spi_transfer and spi_message memory is entirely + * up to the protocol driver, which guarantees the integrity of both (as + * well as the data buffers) for as long as the message is queued. + */ + +/** + * struct spi_transfer - a read/write buffer pair + * @tx_buf: data to be written (DMA-safe memory), or NULL + * @rx_buf: data to be read (DMA-safe memory), or NULL + * @tx_dma: DMA address of tx_buf, if @spi_message.is_dma_mapped + * @rx_dma: DMA address of rx_buf, if @spi_message.is_dma_mapped + * @tx_nbits: number of bits used for writing. If 0 the default + * (SPI_NBITS_SINGLE) is used. + * @rx_nbits: number of bits used for reading. If 0 the default + * (SPI_NBITS_SINGLE) is used. + * @len: size of rx and tx buffers (in bytes) + * @speed_hz: Select a speed other than the device default for this + * transfer. If 0 the default (from @spi_device) is used. + * @bits_per_word: select a bits_per_word other than the device default + * for this transfer. If 0 the default (from @spi_device) is used. + * @dummy_data: indicates transfer is dummy bytes transfer. + * @cs_off: performs the transfer with chipselect off. + * @cs_change: affects chipselect after this transfer completes + * @cs_change_delay: delay between cs deassert and assert when + * @cs_change is set and @spi_transfer is not the last in @spi_message + * @delay: delay to be introduced after this transfer before + * (optionally) changing the chipselect status, then starting + * the next transfer or completing this @spi_message. + * @word_delay: inter word delay to be introduced after each word size + * (set by bits_per_word) transmission. + * @effective_speed_hz: the effective SCK-speed that was used to + * transfer this transfer. Set to 0 if the SPI bus driver does + * not support it. + * @transfer_list: transfers are sequenced through @spi_message.transfers + * @tx_sg: Scatterlist for transmit, currently not for client use + * @rx_sg: Scatterlist for receive, currently not for client use + * @ptp_sts_word_pre: The word (subject to bits_per_word semantics) offset + * within @tx_buf for which the SPI device is requesting that the time + * snapshot for this transfer begins. Upon completing the SPI transfer, + * this value may have changed compared to what was requested, depending + * on the available snapshotting resolution (DMA transfer, + * @ptp_sts_supported is false, etc). + * @ptp_sts_word_post: See @ptp_sts_word_post. The two can be equal (meaning + * that a single byte should be snapshotted). + * If the core takes care of the timestamp (if @ptp_sts_supported is false + * for this controller), it will set @ptp_sts_word_pre to 0, and + * @ptp_sts_word_post to the length of the transfer. This is done + * purposefully (instead of setting to spi_transfer->len - 1) to denote + * that a transfer-level snapshot taken from within the driver may still + * be of higher quality. + * @ptp_sts: Pointer to a memory location held by the SPI slave device where a + * PTP system timestamp structure may lie. If drivers use PIO or their + * hardware has some sort of assist for retrieving exact transfer timing, + * they can (and should) assert @ptp_sts_supported and populate this + * structure using the ptp_read_system_*ts helper functions. + * The timestamp must represent the time at which the SPI slave device has + * processed the word, i.e. the "pre" timestamp should be taken before + * transmitting the "pre" word, and the "post" timestamp after receiving + * transmit confirmation from the controller for the "post" word. + * @timestamped: true if the transfer has been timestamped + * @error: Error status logged by SPI controller driver. + * + * SPI transfers always write the same number of bytes as they read. + * Protocol drivers should always provide @rx_buf and/or @tx_buf. + * In some cases, they may also want to provide DMA addresses for + * the data being transferred; that may reduce overhead, when the + * underlying driver uses DMA. + * + * If the transmit buffer is NULL, zeroes will be shifted out + * while filling @rx_buf. If the receive buffer is NULL, the data + * shifted in will be discarded. Only "len" bytes shift out (or in). + * It's an error to try to shift out a partial word. (For example, by + * shifting out three bytes with word size of sixteen or twenty bits; + * the former uses two bytes per word, the latter uses four bytes.) + * + * In-memory data values are always in native CPU byte order, translated + * from the wire byte order (big-endian except with SPI_LSB_FIRST). So + * for example when bits_per_word is sixteen, buffers are 2N bytes long + * (@len = 2N) and hold N sixteen bit words in CPU byte order. + * + * When the word size of the SPI transfer is not a power-of-two multiple + * of eight bits, those in-memory words include extra bits. In-memory + * words are always seen by protocol drivers as right-justified, so the + * undefined (rx) or unused (tx) bits are always the most significant bits. + * + * All SPI transfers start with the relevant chipselect active. Normally + * it stays selected until after the last transfer in a message. Drivers + * can affect the chipselect signal using cs_change. + * + * (i) If the transfer isn't the last one in the message, this flag is + * used to make the chipselect briefly go inactive in the middle of the + * message. Toggling chipselect in this way may be needed to terminate + * a chip command, letting a single spi_message perform all of group of + * chip transactions together. + * + * (ii) When the transfer is the last one in the message, the chip may + * stay selected until the next transfer. On multi-device SPI busses + * with nothing blocking messages going to other devices, this is just + * a performance hint; starting a message to another device deselects + * this one. But in other cases, this can be used to ensure correctness. + * Some devices need protocol transactions to be built from a series of + * spi_message submissions, where the content of one message is determined + * by the results of previous messages and where the whole transaction + * ends when the chipselect goes inactive. + * + * When SPI can transfer in 1x,2x or 4x. It can get this transfer information + * from device through @tx_nbits and @rx_nbits. In Bi-direction, these + * two should both be set. User can set transfer mode with SPI_NBITS_SINGLE(1x) + * SPI_NBITS_DUAL(2x) and SPI_NBITS_QUAD(4x) to support these three transfer. + * + * The code that submits an spi_message (and its spi_transfers) + * to the lower layers is responsible for managing its memory. + * Zero-initialize every field you don't set up explicitly, to + * insulate against future API updates. After you submit a message + * and its transfers, ignore them until its completion callback. + */ +struct spi_transfer { + /* + * It's okay if tx_buf == rx_buf (right?). + * For MicroWire, one buffer must be NULL. + * Buffers must work with dma_*map_single() calls, unless + * spi_message.is_dma_mapped reports a pre-existing mapping. + */ + const void *tx_buf; + void *rx_buf; + unsigned len; + +#define SPI_TRANS_FAIL_NO_START BIT(0) + u16 error; + + dma_addr_t tx_dma; + dma_addr_t rx_dma; + struct sg_table tx_sg; + struct sg_table rx_sg; + + unsigned dummy_data:1; + unsigned cs_off:1; + unsigned cs_change:1; + unsigned tx_nbits:3; + unsigned rx_nbits:3; + unsigned timestamped:1; +#define SPI_NBITS_SINGLE 0x01 /* 1-bit transfer */ +#define SPI_NBITS_DUAL 0x02 /* 2-bit transfer */ +#define SPI_NBITS_QUAD 0x04 /* 4-bit transfer */ + u8 bits_per_word; + struct spi_delay delay; + struct spi_delay cs_change_delay; + struct spi_delay word_delay; + u32 speed_hz; + + u32 effective_speed_hz; + + unsigned int ptp_sts_word_pre; + unsigned int ptp_sts_word_post; + + struct ptp_system_timestamp *ptp_sts; + + struct list_head transfer_list; +}; + +/** + * struct spi_message - one multi-segment SPI transaction + * @transfers: list of transfer segments in this transaction + * @spi: SPI device to which the transaction is queued + * @is_dma_mapped: if true, the caller provided both DMA and CPU virtual + * addresses for each transfer buffer + * @complete: called to report transaction completions + * @context: the argument to complete() when it's called + * @frame_length: the total number of bytes in the message + * @actual_length: the total number of bytes that were transferred in all + * successful segments + * @status: zero for success, else negative errno + * @queue: for use by whichever driver currently owns the message + * @state: for use by whichever driver currently owns the message + * @resources: for resource management when the SPI message is processed + * @prepared: spi_prepare_message was called for the this message + * @t: for use with spi_message_alloc() when message and transfers have + * been allocated together + * + * A @spi_message is used to execute an atomic sequence of data transfers, + * each represented by a struct spi_transfer. The sequence is "atomic" + * in the sense that no other spi_message may use that SPI bus until that + * sequence completes. On some systems, many such sequences can execute as + * a single programmed DMA transfer. On all systems, these messages are + * queued, and might complete after transactions to other devices. Messages + * sent to a given spi_device are always executed in FIFO order. + * + * The code that submits an spi_message (and its spi_transfers) + * to the lower layers is responsible for managing its memory. + * Zero-initialize every field you don't set up explicitly, to + * insulate against future API updates. After you submit a message + * and its transfers, ignore them until its completion callback. + */ +struct spi_message { + struct list_head transfers; + + struct spi_device *spi; + + unsigned is_dma_mapped:1; + + /* spi_prepare_message() was called for this message */ + bool prepared; + + /* + * REVISIT: we might want a flag affecting the behavior of the + * last transfer ... allowing things like "read 16 bit length L" + * immediately followed by "read L bytes". Basically imposing + * a specific message scheduling algorithm. + * + * Some controller drivers (message-at-a-time queue processing) + * could provide that as their default scheduling algorithm. But + * others (with multi-message pipelines) could need a flag to + * tell them about such special cases. + */ + + /* Completion is reported through a callback */ + int status; + void (*complete)(void *context); + void *context; + unsigned frame_length; + unsigned actual_length; + + /* + * For optional use by whatever driver currently owns the + * spi_message ... between calls to spi_async and then later + * complete(), that's the spi_controller controller driver. + */ + struct list_head queue; + void *state; + + /* List of spi_res resources when the SPI message is processed */ + struct list_head resources; + + /* For embedding transfers into the memory of the message */ + struct spi_transfer t[]; +}; + +static inline void spi_message_init_no_memset(struct spi_message *m) +{ + INIT_LIST_HEAD(&m->transfers); + INIT_LIST_HEAD(&m->resources); +} + +static inline void spi_message_init(struct spi_message *m) +{ + memset(m, 0, sizeof *m); + spi_message_init_no_memset(m); +} + +static inline void +spi_message_add_tail(struct spi_transfer *t, struct spi_message *m) +{ + list_add_tail(&t->transfer_list, &m->transfers); +} + +static inline void +spi_transfer_del(struct spi_transfer *t) +{ + list_del(&t->transfer_list); +} + +static inline int +spi_transfer_delay_exec(struct spi_transfer *t) +{ + return spi_delay_exec(&t->delay, t); +} + +/** + * spi_message_init_with_transfers - Initialize spi_message and append transfers + * @m: spi_message to be initialized + * @xfers: An array of SPI transfers + * @num_xfers: Number of items in the xfer array + * + * This function initializes the given spi_message and adds each spi_transfer in + * the given array to the message. + */ +static inline void +spi_message_init_with_transfers(struct spi_message *m, +struct spi_transfer *xfers, unsigned int num_xfers) +{ + unsigned int i; + + spi_message_init(m); + for (i = 0; i < num_xfers; ++i) + spi_message_add_tail(&xfers[i], m); +} + +/* + * It's fine to embed message and transaction structures in other data + * structures so long as you don't free them while they're in use. + */ +static inline struct spi_message *spi_message_alloc(unsigned ntrans, gfp_t flags) +{ + struct spi_message *m; + + m = kzalloc(struct_size(m, t, ntrans), flags); + if (m) { + unsigned i; + + spi_message_init_no_memset(m); + for (i = 0; i < ntrans; i++) + spi_message_add_tail(&m->t[i], m); + } + return m; +} + +static inline void spi_message_free(struct spi_message *m) +{ + kfree(m); +} + +extern int spi_setup(struct spi_device *spi); +extern int spi_async(struct spi_device *spi, struct spi_message *message); +extern int spi_slave_abort(struct spi_device *spi); +extern int spi_target_abort(struct spi_device *spi); + +static inline size_t +spi_max_message_size(struct spi_device *spi) +{ + struct spi_controller *ctlr = spi->controller; + + if (!ctlr->max_message_size) + return SIZE_MAX; + return ctlr->max_message_size(spi); +} + +static inline size_t +spi_max_transfer_size(struct spi_device *spi) +{ + struct spi_controller *ctlr = spi->controller; + size_t tr_max = SIZE_MAX; + size_t msg_max = spi_max_message_size(spi); + + if (ctlr->max_transfer_size) + tr_max = ctlr->max_transfer_size(spi); + + /* Transfer size limit must not be greater than message size limit */ + return min(tr_max, msg_max); +} + +/** + * spi_is_bpw_supported - Check if bits per word is supported + * @spi: SPI device + * @bpw: Bits per word + * + * This function checks to see if the SPI controller supports @bpw. + * + * Returns: + * True if @bpw is supported, false otherwise. + */ +static inline bool spi_is_bpw_supported(struct spi_device *spi, u32 bpw) +{ + u32 bpw_mask = spi->master->bits_per_word_mask; + + if (bpw == 8 || (bpw <= 32 && bpw_mask & SPI_BPW_MASK(bpw))) + return true; + + return false; +} + +/** + * spi_controller_xfer_timeout - Compute a suitable timeout value + * @ctlr: SPI device + * @xfer: Transfer descriptor + * + * Compute a relevant timeout value for the given transfer. We derive the time + * that it would take on a single data line and take twice this amount of time + * with a minimum of 500ms to avoid false positives on loaded systems. + * + * Returns: Transfer timeout value in milliseconds. + */ +static inline unsigned int spi_controller_xfer_timeout(struct spi_controller *ctlr, + struct spi_transfer *xfer) +{ + return max(xfer->len * 8 * 2 / (xfer->speed_hz / 1000), 500U); +} + +/*---------------------------------------------------------------------------*/ + +/* SPI transfer replacement methods which make use of spi_res */ + +struct spi_replaced_transfers; +typedef void (*spi_replaced_release_t)(struct spi_controller *ctlr, + struct spi_message *msg, + struct spi_replaced_transfers *res); +/** + * struct spi_replaced_transfers - structure describing the spi_transfer + * replacements that have occurred + * so that they can get reverted + * @release: some extra release code to get executed prior to + * releasing this structure + * @extradata: pointer to some extra data if requested or NULL + * @replaced_transfers: transfers that have been replaced and which need + * to get restored + * @replaced_after: the transfer after which the @replaced_transfers + * are to get re-inserted + * @inserted: number of transfers inserted + * @inserted_transfers: array of spi_transfers of array-size @inserted, + * that have been replacing replaced_transfers + * + * Note: that @extradata will point to @inserted_transfers[@inserted] + * if some extra allocation is requested, so alignment will be the same + * as for spi_transfers. + */ +struct spi_replaced_transfers { + spi_replaced_release_t release; + void *extradata; + struct list_head replaced_transfers; + struct list_head *replaced_after; + size_t inserted; + struct spi_transfer inserted_transfers[]; +}; + +/*---------------------------------------------------------------------------*/ + +/* SPI transfer transformation methods */ + +extern int spi_split_transfers_maxsize(struct spi_controller *ctlr, + struct spi_message *msg, + size_t maxsize, + gfp_t gfp); +extern int spi_split_transfers_maxwords(struct spi_controller *ctlr, + struct spi_message *msg, + size_t maxwords, + gfp_t gfp); + +/*---------------------------------------------------------------------------*/ + +/* + * All these synchronous SPI transfer routines are utilities layered + * over the core async transfer primitive. Here, "synchronous" means + * they will sleep uninterruptibly until the async transfer completes. + */ + +extern int spi_sync(struct spi_device *spi, struct spi_message *message); +extern int spi_sync_locked(struct spi_device *spi, struct spi_message *message); +extern int spi_bus_lock(struct spi_controller *ctlr); +extern int spi_bus_unlock(struct spi_controller *ctlr); + +/** + * spi_sync_transfer - synchronous SPI data transfer + * @spi: device with which data will be exchanged + * @xfers: An array of spi_transfers + * @num_xfers: Number of items in the xfer array + * Context: can sleep + * + * Does a synchronous SPI data transfer of the given spi_transfer array. + * + * For more specific semantics see spi_sync(). + * + * Return: zero on success, else a negative error code. + */ +static inline int +spi_sync_transfer(struct spi_device *spi, struct spi_transfer *xfers, + unsigned int num_xfers) +{ + struct spi_message msg; + + spi_message_init_with_transfers(&msg, xfers, num_xfers); + + return spi_sync(spi, &msg); +} + +/** + * spi_write - SPI synchronous write + * @spi: device to which data will be written + * @buf: data buffer + * @len: data buffer size + * Context: can sleep + * + * This function writes the buffer @buf. + * Callable only from contexts that can sleep. + * + * Return: zero on success, else a negative error code. + */ +static inline int +spi_write(struct spi_device *spi, const void *buf, size_t len) +{ + struct spi_transfer t = { + .tx_buf = buf, + .len = len, + }; + + return spi_sync_transfer(spi, &t, 1); +} + +/** + * spi_read - SPI synchronous read + * @spi: device from which data will be read + * @buf: data buffer + * @len: data buffer size + * Context: can sleep + * + * This function reads the buffer @buf. + * Callable only from contexts that can sleep. + * + * Return: zero on success, else a negative error code. + */ +static inline int +spi_read(struct spi_device *spi, void *buf, size_t len) +{ + struct spi_transfer t = { + .rx_buf = buf, + .len = len, + }; + + return spi_sync_transfer(spi, &t, 1); +} + +/* This copies txbuf and rxbuf data; for small transfers only! */ +extern int spi_write_then_read(struct spi_device *spi, + const void *txbuf, unsigned n_tx, + void *rxbuf, unsigned n_rx); + +/** + * spi_w8r8 - SPI synchronous 8 bit write followed by 8 bit read + * @spi: device with which data will be exchanged + * @cmd: command to be written before data is read back + * Context: can sleep + * + * Callable only from contexts that can sleep. + * + * Return: the (unsigned) eight bit number returned by the + * device, or else a negative error code. + */ +static inline ssize_t spi_w8r8(struct spi_device *spi, u8 cmd) +{ + ssize_t status; + u8 result; + + status = spi_write_then_read(spi, &cmd, 1, &result, 1); + + /* Return negative errno or unsigned value */ + return (status < 0) ? status : result; +} + +/** + * spi_w8r16 - SPI synchronous 8 bit write followed by 16 bit read + * @spi: device with which data will be exchanged + * @cmd: command to be written before data is read back + * Context: can sleep + * + * The number is returned in wire-order, which is at least sometimes + * big-endian. + * + * Callable only from contexts that can sleep. + * + * Return: the (unsigned) sixteen bit number returned by the + * device, or else a negative error code. + */ +static inline ssize_t spi_w8r16(struct spi_device *spi, u8 cmd) +{ + ssize_t status; + u16 result; + + status = spi_write_then_read(spi, &cmd, 1, &result, 2); + + /* Return negative errno or unsigned value */ + return (status < 0) ? status : result; +} + +/** + * spi_w8r16be - SPI synchronous 8 bit write followed by 16 bit big-endian read + * @spi: device with which data will be exchanged + * @cmd: command to be written before data is read back + * Context: can sleep + * + * This function is similar to spi_w8r16, with the exception that it will + * convert the read 16 bit data word from big-endian to native endianness. + * + * Callable only from contexts that can sleep. + * + * Return: the (unsigned) sixteen bit number returned by the device in CPU + * endianness, or else a negative error code. + */ +static inline ssize_t spi_w8r16be(struct spi_device *spi, u8 cmd) + +{ + ssize_t status; + __be16 result; + + status = spi_write_then_read(spi, &cmd, 1, &result, 2); + if (status < 0) + return status; + + return be16_to_cpu(result); +} + +/*---------------------------------------------------------------------------*/ + +/* + * INTERFACE between board init code and SPI infrastructure. + * + * No SPI driver ever sees these SPI device table segments, but + * it's how the SPI core (or adapters that get hotplugged) grows + * the driver model tree. + * + * As a rule, SPI devices can't be probed. Instead, board init code + * provides a table listing the devices which are present, with enough + * information to bind and set up the device's driver. There's basic + * support for non-static configurations too; enough to handle adding + * parport adapters, or microcontrollers acting as USB-to-SPI bridges. + */ + +/** + * struct spi_board_info - board-specific template for a SPI device + * @modalias: Initializes spi_device.modalias; identifies the driver. + * @platform_data: Initializes spi_device.platform_data; the particular + * data stored there is driver-specific. + * @swnode: Software node for the device. + * @controller_data: Initializes spi_device.controller_data; some + * controllers need hints about hardware setup, e.g. for DMA. + * @irq: Initializes spi_device.irq; depends on how the board is wired. + * @max_speed_hz: Initializes spi_device.max_speed_hz; based on limits + * from the chip datasheet and board-specific signal quality issues. + * @bus_num: Identifies which spi_controller parents the spi_device; unused + * by spi_new_device(), and otherwise depends on board wiring. + * @chip_select: Initializes spi_device.chip_select; depends on how + * the board is wired. + * @mode: Initializes spi_device.mode; based on the chip datasheet, board + * wiring (some devices support both 3WIRE and standard modes), and + * possibly presence of an inverter in the chipselect path. + * + * When adding new SPI devices to the device tree, these structures serve + * as a partial device template. They hold information which can't always + * be determined by drivers. Information that probe() can establish (such + * as the default transfer wordsize) is not included here. + * + * These structures are used in two places. Their primary role is to + * be stored in tables of board-specific device descriptors, which are + * declared early in board initialization and then used (much later) to + * populate a controller's device tree after the that controller's driver + * initializes. A secondary (and atypical) role is as a parameter to + * spi_new_device() call, which happens after those controller drivers + * are active in some dynamic board configuration models. + */ +struct spi_board_info { + /* + * The device name and module name are coupled, like platform_bus; + * "modalias" is normally the driver name. + * + * platform_data goes to spi_device.dev.platform_data, + * controller_data goes to spi_device.controller_data, + * IRQ is copied too. + */ + char modalias[SPI_NAME_SIZE]; + const void *platform_data; + const struct software_node *swnode; + void *controller_data; + int irq; + + /* Slower signaling on noisy or low voltage boards */ + u32 max_speed_hz; + + + /* + * bus_num is board specific and matches the bus_num of some + * spi_controller that will probably be registered later. + * + * chip_select reflects how this chip is wired to that master; + * it's less than num_chipselect. + */ + u16 bus_num; + u16 chip_select; + + /* + * mode becomes spi_device.mode, and is essential for chips + * where the default of SPI_CS_HIGH = 0 is wrong. + */ + u32 mode; + + /* + * ... may need additional spi_device chip config data here. + * avoid stuff protocol drivers can set; but include stuff + * needed to behave without being bound to a driver: + * - quirks like clock rate mattering when not selected + */ +}; + +#ifdef CONFIG_SPI +extern int +spi_register_board_info(struct spi_board_info const *info, unsigned n); +#else +/* Board init code may ignore whether SPI is configured or not */ +static inline int +spi_register_board_info(struct spi_board_info const *info, unsigned n) + { return 0; } +#endif + +/* + * If you're hotplugging an adapter with devices (parport, USB, etc) + * use spi_new_device() to describe each device. You can also call + * spi_unregister_device() to start making that device vanish, but + * normally that would be handled by spi_unregister_controller(). + * + * You can also use spi_alloc_device() and spi_add_device() to use a two + * stage registration sequence for each spi_device. This gives the caller + * some more control over the spi_device structure before it is registered, + * but requires that caller to initialize fields that would otherwise + * be defined using the board info. + */ +extern struct spi_device * +spi_alloc_device(struct spi_controller *ctlr); + +extern int +spi_add_device(struct spi_device *spi); + +extern struct spi_device * +spi_new_device(struct spi_controller *, struct spi_board_info *); + +extern void spi_unregister_device(struct spi_device *spi); + +extern const struct spi_device_id * +spi_get_device_id(const struct spi_device *sdev); + +extern const void * +spi_get_device_match_data(const struct spi_device *sdev); + +static inline bool +spi_transfer_is_last(struct spi_controller *ctlr, struct spi_transfer *xfer) +{ + return list_is_last(&xfer->transfer_list, &ctlr->cur_msg->transfers); +} + +/* Compatibility layer */ +#define spi_master spi_controller + +#define SPI_MASTER_HALF_DUPLEX SPI_CONTROLLER_HALF_DUPLEX + +#define spi_master_get_devdata(_ctlr) spi_controller_get_devdata(_ctlr) +#define spi_master_set_devdata(_ctlr, _data) \ + spi_controller_set_devdata(_ctlr, _data) +#define spi_master_get(_ctlr) spi_controller_get(_ctlr) +#define spi_master_put(_ctlr) spi_controller_put(_ctlr) +#define spi_master_suspend(_ctlr) spi_controller_suspend(_ctlr) +#define spi_master_resume(_ctlr) spi_controller_resume(_ctlr) + +#define spi_register_master(_ctlr) spi_register_controller(_ctlr) +#define devm_spi_register_master(_dev, _ctlr) \ + devm_spi_register_controller(_dev, _ctlr) +#define spi_unregister_master(_ctlr) spi_unregister_controller(_ctlr) + +#endif /* __LINUX_SPI_H */ diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h new file mode 100644 index 000000000..4444c2a99 --- /dev/null +++ b/include/linux/spi/spi_bitbang.h @@ -0,0 +1,50 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __SPI_BITBANG_H +#define __SPI_BITBANG_H + +#include <linux/workqueue.h> + +struct spi_bitbang { + struct mutex lock; + u8 busy; + u8 use_dma; + u16 flags; /* extra spi->mode support */ + + struct spi_master *master; + + /* setup_transfer() changes clock and/or wordsize to match settings + * for this transfer; zeroes restore defaults from spi_device. + */ + int (*setup_transfer)(struct spi_device *spi, + struct spi_transfer *t); + + void (*chipselect)(struct spi_device *spi, int is_on); +#define BITBANG_CS_ACTIVE 1 /* normally nCS, active low */ +#define BITBANG_CS_INACTIVE 0 + + /* txrx_bufs() may handle dma mapping for transfers that don't + * already have one (transfer.{tx,rx}_dma is zero), or use PIO + */ + int (*txrx_bufs)(struct spi_device *spi, struct spi_transfer *t); + + /* txrx_word[SPI_MODE_*]() just looks like a shift register */ + u32 (*txrx_word[4])(struct spi_device *spi, + unsigned nsecs, + u32 word, u8 bits, unsigned flags); + int (*set_line_direction)(struct spi_device *spi, bool output); +}; + +/* you can call these default bitbang->master methods from your custom + * methods, if you like. + */ +extern int spi_bitbang_setup(struct spi_device *spi); +extern void spi_bitbang_cleanup(struct spi_device *spi); +extern int spi_bitbang_setup_transfer(struct spi_device *spi, + struct spi_transfer *t); + +/* start or stop queue processing */ +extern int spi_bitbang_start(struct spi_bitbang *spi); +extern int spi_bitbang_init(struct spi_bitbang *spi); +extern void spi_bitbang_stop(struct spi_bitbang *spi); + +#endif /* __SPI_BITBANG_H */ diff --git a/include/linux/spi/spi_gpio.h b/include/linux/spi/spi_gpio.h new file mode 100644 index 000000000..9e7e83d86 --- /dev/null +++ b/include/linux/spi/spi_gpio.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __LINUX_SPI_GPIO_H +#define __LINUX_SPI_GPIO_H + +/* + * For each bitbanged SPI bus, set up a platform_device node with: + * - name "spi_gpio" + * - id the same as the SPI bus number it implements + * - dev.platform data pointing to a struct spi_gpio_platform_data + * + * Use spi_board_info with these busses in the usual way. + * + * If the bitbanged bus is later switched to a "native" controller, + * that platform_device and controller_data should be removed. + */ + +/** + * struct spi_gpio_platform_data - parameter for bitbanged SPI master + * @num_chipselect: how many slaves to allow + */ +struct spi_gpio_platform_data { + u16 num_chipselect; +}; + +#endif /* __LINUX_SPI_GPIO_H */ diff --git a/include/linux/spi/spi_oc_tiny.h b/include/linux/spi/spi_oc_tiny.h new file mode 100644 index 000000000..284872ac1 --- /dev/null +++ b/include/linux/spi/spi_oc_tiny.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _LINUX_SPI_SPI_OC_TINY_H +#define _LINUX_SPI_SPI_OC_TINY_H + +/** + * struct tiny_spi_platform_data - platform data of the OpenCores tiny SPI + * @freq: input clock freq to the core. + * @baudwidth: baud rate divider width of the core. + * + * freq and baudwidth are used only if the divider is programmable. + */ +struct tiny_spi_platform_data { + unsigned int freq; + unsigned int baudwidth; +}; + +#endif /* _LINUX_SPI_SPI_OC_TINY_H */ diff --git a/include/linux/spi/tdo24m.h b/include/linux/spi/tdo24m.h new file mode 100644 index 000000000..48dd58ac5 --- /dev/null +++ b/include/linux/spi/tdo24m.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __TDO24M_H__ +#define __TDO24M_H__ + +enum tdo24m_model { + TDO24M, + TDO35S, +}; + +struct tdo24m_platform_data { + enum tdo24m_model model; +}; + +#endif /* __TDO24M_H__ */ diff --git a/include/linux/spi/tle62x0.h b/include/linux/spi/tle62x0.h new file mode 100644 index 000000000..5d74b9fff --- /dev/null +++ b/include/linux/spi/tle62x0.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * tle62x0.h - platform glue to Infineon TLE62x0 driver chips + * + * Copyright 2007 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> +*/ + +struct tle62x0_pdata { + unsigned int init_state; + unsigned int gpio_count; +}; diff --git a/include/linux/spi/xilinx_spi.h b/include/linux/spi/xilinx_spi.h new file mode 100644 index 000000000..3934ce789 --- /dev/null +++ b/include/linux/spi/xilinx_spi.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __LINUX_SPI_XILINX_SPI_H +#define __LINUX_SPI_XILINX_SPI_H + +/** + * struct xspi_platform_data - Platform data of the Xilinx SPI driver + * @num_chipselect: Number of chip select by the IP. + * @little_endian: If registers should be accessed little endian or not. + * @bits_per_word: Number of bits per word. + * @devices: Devices to add when the driver is probed. + * @num_devices: Number of devices in the devices array. + */ +struct xspi_platform_data { + u16 num_chipselect; + u8 bits_per_word; + struct spi_board_info *devices; + u8 num_devices; + bool force_irq; +}; + +#endif /* __LINUX_SPI_XILINX_SPI_H */ |