diff options
Diffstat (limited to 'include/rdma/rdma_cm.h')
| -rw-r--r-- | include/rdma/rdma_cm.h | 393 |
1 files changed, 393 insertions, 0 deletions
diff --git a/include/rdma/rdma_cm.h b/include/rdma/rdma_cm.h new file mode 100644 index 000000000..8a8ab2f79 --- /dev/null +++ b/include/rdma/rdma_cm.h @@ -0,0 +1,393 @@ +/* SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB */ +/* + * Copyright (c) 2005 Voltaire Inc. All rights reserved. + * Copyright (c) 2005 Intel Corporation. All rights reserved. + */ + +#ifndef RDMA_CM_H +#define RDMA_CM_H + +#include <linux/socket.h> +#include <linux/in6.h> +#include <rdma/ib_addr.h> +#include <rdma/ib_sa.h> +#include <uapi/rdma/rdma_user_cm.h> + +/* + * Upon receiving a device removal event, users must destroy the associated + * RDMA identifier and release all resources allocated with the device. + */ +enum rdma_cm_event_type { + RDMA_CM_EVENT_ADDR_RESOLVED, + RDMA_CM_EVENT_ADDR_ERROR, + RDMA_CM_EVENT_ROUTE_RESOLVED, + RDMA_CM_EVENT_ROUTE_ERROR, + RDMA_CM_EVENT_CONNECT_REQUEST, + RDMA_CM_EVENT_CONNECT_RESPONSE, + RDMA_CM_EVENT_CONNECT_ERROR, + RDMA_CM_EVENT_UNREACHABLE, + RDMA_CM_EVENT_REJECTED, + RDMA_CM_EVENT_ESTABLISHED, + RDMA_CM_EVENT_DISCONNECTED, + RDMA_CM_EVENT_DEVICE_REMOVAL, + RDMA_CM_EVENT_MULTICAST_JOIN, + RDMA_CM_EVENT_MULTICAST_ERROR, + RDMA_CM_EVENT_ADDR_CHANGE, + RDMA_CM_EVENT_TIMEWAIT_EXIT +}; + +const char *__attribute_const__ rdma_event_msg(enum rdma_cm_event_type event); + +#define RDMA_IB_IP_PS_MASK 0xFFFFFFFFFFFF0000ULL +#define RDMA_IB_IP_PS_TCP 0x0000000001060000ULL +#define RDMA_IB_IP_PS_UDP 0x0000000001110000ULL +#define RDMA_IB_IP_PS_IB 0x00000000013F0000ULL + +struct rdma_addr { + struct sockaddr_storage src_addr; + struct sockaddr_storage dst_addr; + struct rdma_dev_addr dev_addr; +}; + +struct rdma_route { + struct rdma_addr addr; + struct sa_path_rec *path_rec; + + /* Optional path records of primary path */ + struct sa_path_rec *path_rec_inbound; + struct sa_path_rec *path_rec_outbound; + + /* + * 0 - No primary nor alternate path is available + * 1 - Only primary path is available + * 2 - Both primary and alternate path are available + */ + int num_pri_alt_paths; +}; + +struct rdma_conn_param { + const void *private_data; + u8 private_data_len; + u8 responder_resources; + u8 initiator_depth; + u8 flow_control; + u8 retry_count; /* ignored when accepting */ + u8 rnr_retry_count; + /* Fields below ignored if a QP is created on the rdma_cm_id. */ + u8 srq; + u32 qp_num; + u32 qkey; +}; + +struct rdma_ud_param { + const void *private_data; + u8 private_data_len; + struct rdma_ah_attr ah_attr; + u32 qp_num; + u32 qkey; +}; + +struct rdma_cm_event { + enum rdma_cm_event_type event; + int status; + union { + struct rdma_conn_param conn; + struct rdma_ud_param ud; + } param; + struct rdma_ucm_ece ece; +}; + +struct rdma_cm_id; + +/** + * rdma_cm_event_handler - Callback used to report user events. + * + * Notes: Users may not call rdma_destroy_id from this callback to destroy + * the passed in id, or a corresponding listen id. Returning a + * non-zero value from the callback will destroy the passed in id. + */ +typedef int (*rdma_cm_event_handler)(struct rdma_cm_id *id, + struct rdma_cm_event *event); + +struct rdma_cm_id { + struct ib_device *device; + void *context; + struct ib_qp *qp; + rdma_cm_event_handler event_handler; + struct rdma_route route; + enum rdma_ucm_port_space ps; + enum ib_qp_type qp_type; + u32 port_num; + struct work_struct net_work; +}; + +struct rdma_cm_id * +__rdma_create_kernel_id(struct net *net, rdma_cm_event_handler event_handler, + void *context, enum rdma_ucm_port_space ps, + enum ib_qp_type qp_type, const char *caller); +struct rdma_cm_id *rdma_create_user_id(rdma_cm_event_handler event_handler, + void *context, + enum rdma_ucm_port_space ps, + enum ib_qp_type qp_type); + +/** + * rdma_create_id - Create an RDMA identifier. + * + * @net: The network namespace in which to create the new id. + * @event_handler: User callback invoked to report events associated with the + * returned rdma_id. + * @context: User specified context associated with the id. + * @ps: RDMA port space. + * @qp_type: type of queue pair associated with the id. + * + * Returns a new rdma_cm_id. The id holds a reference on the network + * namespace until it is destroyed. + * + * The event handler callback serializes on the id's mutex and is + * allowed to sleep. + */ +#define rdma_create_id(net, event_handler, context, ps, qp_type) \ + __rdma_create_kernel_id(net, event_handler, context, ps, qp_type, \ + KBUILD_MODNAME) + +/** + * rdma_destroy_id - Destroys an RDMA identifier. + * + * @id: RDMA identifier. + * + * Note: calling this function has the effect of canceling in-flight + * asynchronous operations associated with the id. + */ +void rdma_destroy_id(struct rdma_cm_id *id); + +/** + * rdma_bind_addr - Bind an RDMA identifier to a source address and + * associated RDMA device, if needed. + * + * @id: RDMA identifier. + * @addr: Local address information. Wildcard values are permitted. + * + * This associates a source address with the RDMA identifier before calling + * rdma_listen. If a specific local address is given, the RDMA identifier will + * be bound to a local RDMA device. + */ +int rdma_bind_addr(struct rdma_cm_id *id, struct sockaddr *addr); + +/** + * rdma_resolve_addr - Resolve destination and optional source addresses + * from IP addresses to an RDMA address. If successful, the specified + * rdma_cm_id will be bound to a local device. + * + * @id: RDMA identifier. + * @src_addr: Source address information. This parameter may be NULL. + * @dst_addr: Destination address information. + * @timeout_ms: Time to wait for resolution to complete. + */ +int rdma_resolve_addr(struct rdma_cm_id *id, struct sockaddr *src_addr, + const struct sockaddr *dst_addr, + unsigned long timeout_ms); + +/** + * rdma_resolve_route - Resolve the RDMA address bound to the RDMA identifier + * into route information needed to establish a connection. + * + * This is called on the client side of a connection. + * Users must have first called rdma_resolve_addr to resolve a dst_addr + * into an RDMA address before calling this routine. + */ +int rdma_resolve_route(struct rdma_cm_id *id, unsigned long timeout_ms); + +/** + * rdma_create_qp - Allocate a QP and associate it with the specified RDMA + * identifier. + * + * QPs allocated to an rdma_cm_id will automatically be transitioned by the CMA + * through their states. + */ +int rdma_create_qp(struct rdma_cm_id *id, struct ib_pd *pd, + struct ib_qp_init_attr *qp_init_attr); + +/** + * rdma_destroy_qp - Deallocate the QP associated with the specified RDMA + * identifier. + * + * Users must destroy any QP associated with an RDMA identifier before + * destroying the RDMA ID. + */ +void rdma_destroy_qp(struct rdma_cm_id *id); + +/** + * rdma_init_qp_attr - Initializes the QP attributes for use in transitioning + * to a specified QP state. + * @id: Communication identifier associated with the QP attributes to + * initialize. + * @qp_attr: On input, specifies the desired QP state. On output, the + * mandatory and desired optional attributes will be set in order to + * modify the QP to the specified state. + * @qp_attr_mask: The QP attribute mask that may be used to transition the + * QP to the specified state. + * + * Users must set the @qp_attr->qp_state to the desired QP state. This call + * will set all required attributes for the given transition, along with + * known optional attributes. Users may override the attributes returned from + * this call before calling ib_modify_qp. + * + * Users that wish to have their QP automatically transitioned through its + * states can associate a QP with the rdma_cm_id by calling rdma_create_qp(). + */ +int rdma_init_qp_attr(struct rdma_cm_id *id, struct ib_qp_attr *qp_attr, + int *qp_attr_mask); + +int rdma_connect(struct rdma_cm_id *id, struct rdma_conn_param *conn_param); +int rdma_connect_locked(struct rdma_cm_id *id, + struct rdma_conn_param *conn_param); + +int rdma_connect_ece(struct rdma_cm_id *id, struct rdma_conn_param *conn_param, + struct rdma_ucm_ece *ece); + +/** + * rdma_listen - This function is called by the passive side to + * listen for incoming connection requests. + * + * Users must have bound the rdma_cm_id to a local address by calling + * rdma_bind_addr before calling this routine. + */ +int rdma_listen(struct rdma_cm_id *id, int backlog); + +int rdma_accept(struct rdma_cm_id *id, struct rdma_conn_param *conn_param); + +void rdma_lock_handler(struct rdma_cm_id *id); +void rdma_unlock_handler(struct rdma_cm_id *id); +int rdma_accept_ece(struct rdma_cm_id *id, struct rdma_conn_param *conn_param, + struct rdma_ucm_ece *ece); + +/** + * rdma_notify - Notifies the RDMA CM of an asynchronous event that has + * occurred on the connection. + * @id: Connection identifier to transition to established. + * @event: Asynchronous event. + * + * This routine should be invoked by users to notify the CM of relevant + * communication events. Events that should be reported to the CM and + * when to report them are: + * + * IB_EVENT_COMM_EST - Used when a message is received on a connected + * QP before an RTU has been received. + */ +int rdma_notify(struct rdma_cm_id *id, enum ib_event_type event); + +/** + * rdma_reject - Called to reject a connection request or response. + */ +int rdma_reject(struct rdma_cm_id *id, const void *private_data, + u8 private_data_len, u8 reason); + +/** + * rdma_disconnect - This function disconnects the associated QP and + * transitions it into the error state. + */ +int rdma_disconnect(struct rdma_cm_id *id); + +/** + * rdma_join_multicast - Join the multicast group specified by the given + * address. + * @id: Communication identifier associated with the request. + * @addr: Multicast address identifying the group to join. + * @join_state: Multicast JoinState bitmap requested by port. + * Bitmap is based on IB_SA_MCMEMBER_REC_JOIN_STATE bits. + * @context: User-defined context associated with the join request, returned + * to the user through the private_data pointer in multicast events. + */ +int rdma_join_multicast(struct rdma_cm_id *id, struct sockaddr *addr, + u8 join_state, void *context); + +/** + * rdma_leave_multicast - Leave the multicast group specified by the given + * address. + */ +void rdma_leave_multicast(struct rdma_cm_id *id, struct sockaddr *addr); + +/** + * rdma_set_service_type - Set the type of service associated with a + * connection identifier. + * @id: Communication identifier to associated with service type. + * @tos: Type of service. + * + * The type of service is interpretted as a differentiated service + * field (RFC 2474). The service type should be specified before + * performing route resolution, as existing communication on the + * connection identifier may be unaffected. The type of service + * requested may not be supported by the network to all destinations. + */ +void rdma_set_service_type(struct rdma_cm_id *id, int tos); + +/** + * rdma_set_reuseaddr - Allow the reuse of local addresses when binding + * the rdma_cm_id. + * @id: Communication identifier to configure. + * @reuse: Value indicating if the bound address is reusable. + * + * Reuse must be set before an address is bound to the id. + */ +int rdma_set_reuseaddr(struct rdma_cm_id *id, int reuse); + +/** + * rdma_set_afonly - Specify that listens are restricted to the + * bound address family only. + * @id: Communication identifer to configure. + * @afonly: Value indicating if listens are restricted. + * + * Must be set before identifier is in the listening state. + */ +int rdma_set_afonly(struct rdma_cm_id *id, int afonly); + +int rdma_set_ack_timeout(struct rdma_cm_id *id, u8 timeout); + +int rdma_set_min_rnr_timer(struct rdma_cm_id *id, u8 min_rnr_timer); + /** + * rdma_get_service_id - Return the IB service ID for a specified address. + * @id: Communication identifier associated with the address. + * @addr: Address for the service ID. + */ +__be64 rdma_get_service_id(struct rdma_cm_id *id, struct sockaddr *addr); + +/** + * rdma_reject_msg - return a pointer to a reject message string. + * @id: Communication identifier that received the REJECT event. + * @reason: Value returned in the REJECT event status field. + */ +const char *__attribute_const__ rdma_reject_msg(struct rdma_cm_id *id, + int reason); +/** + * rdma_consumer_reject_data - return the consumer reject private data and + * length, if any. + * @id: Communication identifier that received the REJECT event. + * @ev: RDMA CM reject event. + * @data_len: Pointer to the resulting length of the consumer data. + */ +const void *rdma_consumer_reject_data(struct rdma_cm_id *id, + struct rdma_cm_event *ev, u8 *data_len); + +/** + * rdma_read_gids - Return the SGID and DGID used for establishing + * connection. This can be used after rdma_resolve_addr() + * on client side. This can be use on new connection + * on server side. This is applicable to IB, RoCE, iWarp. + * If cm_id is not bound yet to the RDMA device, it doesn't + * copy and SGID or DGID to the given pointers. + * @id: Communication identifier whose GIDs are queried. + * @sgid: Pointer to SGID where SGID will be returned. It is optional. + * @dgid: Pointer to DGID where DGID will be returned. It is optional. + * Note: This API should not be used by any new ULPs or new code. + * Instead, users interested in querying GIDs should refer to path record + * of the rdma_cm_id to query the GIDs. + * This API is provided for compatibility for existing users. + */ + +void rdma_read_gids(struct rdma_cm_id *cm_id, union ib_gid *sgid, + union ib_gid *dgid); + +struct iw_cm_id *rdma_iw_cm_id(struct rdma_cm_id *cm_id); +struct rdma_cm_id *rdma_res_to_id(struct rdma_restrack_entry *res); + +#endif /* RDMA_CM_H */ |