diff options
Diffstat (limited to 'include/uapi/linux/perf_event.h')
-rw-r--r-- | include/uapi/linux/perf_event.h | 1449 |
1 files changed, 1449 insertions, 0 deletions
diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h new file mode 100644 index 0000000000..39c6a250dd --- /dev/null +++ b/include/uapi/linux/perf_event.h @@ -0,0 +1,1449 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Performance events: + * + * Copyright (C) 2008-2009, Thomas Gleixner <tglx@linutronix.de> + * Copyright (C) 2008-2011, Red Hat, Inc., Ingo Molnar + * Copyright (C) 2008-2011, Red Hat, Inc., Peter Zijlstra + * + * Data type definitions, declarations, prototypes. + * + * Started by: Thomas Gleixner and Ingo Molnar + * + * For licencing details see kernel-base/COPYING + */ +#ifndef _UAPI_LINUX_PERF_EVENT_H +#define _UAPI_LINUX_PERF_EVENT_H + +#include <linux/types.h> +#include <linux/ioctl.h> +#include <asm/byteorder.h> + +/* + * User-space ABI bits: + */ + +/* + * attr.type + */ +enum perf_type_id { + PERF_TYPE_HARDWARE = 0, + PERF_TYPE_SOFTWARE = 1, + PERF_TYPE_TRACEPOINT = 2, + PERF_TYPE_HW_CACHE = 3, + PERF_TYPE_RAW = 4, + PERF_TYPE_BREAKPOINT = 5, + + PERF_TYPE_MAX, /* non-ABI */ +}; + +/* + * attr.config layout for type PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHE + * PERF_TYPE_HARDWARE: 0xEEEEEEEE000000AA + * AA: hardware event ID + * EEEEEEEE: PMU type ID + * PERF_TYPE_HW_CACHE: 0xEEEEEEEE00DDCCBB + * BB: hardware cache ID + * CC: hardware cache op ID + * DD: hardware cache op result ID + * EEEEEEEE: PMU type ID + * If the PMU type ID is 0, the PERF_TYPE_RAW will be applied. + */ +#define PERF_PMU_TYPE_SHIFT 32 +#define PERF_HW_EVENT_MASK 0xffffffff + +/* + * Generalized performance event event_id types, used by the + * attr.event_id parameter of the sys_perf_event_open() + * syscall: + */ +enum perf_hw_id { + /* + * Common hardware events, generalized by the kernel: + */ + PERF_COUNT_HW_CPU_CYCLES = 0, + PERF_COUNT_HW_INSTRUCTIONS = 1, + PERF_COUNT_HW_CACHE_REFERENCES = 2, + PERF_COUNT_HW_CACHE_MISSES = 3, + PERF_COUNT_HW_BRANCH_INSTRUCTIONS = 4, + PERF_COUNT_HW_BRANCH_MISSES = 5, + PERF_COUNT_HW_BUS_CYCLES = 6, + PERF_COUNT_HW_STALLED_CYCLES_FRONTEND = 7, + PERF_COUNT_HW_STALLED_CYCLES_BACKEND = 8, + PERF_COUNT_HW_REF_CPU_CYCLES = 9, + + PERF_COUNT_HW_MAX, /* non-ABI */ +}; + +/* + * Generalized hardware cache events: + * + * { L1-D, L1-I, LLC, ITLB, DTLB, BPU, NODE } x + * { read, write, prefetch } x + * { accesses, misses } + */ +enum perf_hw_cache_id { + PERF_COUNT_HW_CACHE_L1D = 0, + PERF_COUNT_HW_CACHE_L1I = 1, + PERF_COUNT_HW_CACHE_LL = 2, + PERF_COUNT_HW_CACHE_DTLB = 3, + PERF_COUNT_HW_CACHE_ITLB = 4, + PERF_COUNT_HW_CACHE_BPU = 5, + PERF_COUNT_HW_CACHE_NODE = 6, + + PERF_COUNT_HW_CACHE_MAX, /* non-ABI */ +}; + +enum perf_hw_cache_op_id { + PERF_COUNT_HW_CACHE_OP_READ = 0, + PERF_COUNT_HW_CACHE_OP_WRITE = 1, + PERF_COUNT_HW_CACHE_OP_PREFETCH = 2, + + PERF_COUNT_HW_CACHE_OP_MAX, /* non-ABI */ +}; + +enum perf_hw_cache_op_result_id { + PERF_COUNT_HW_CACHE_RESULT_ACCESS = 0, + PERF_COUNT_HW_CACHE_RESULT_MISS = 1, + + PERF_COUNT_HW_CACHE_RESULT_MAX, /* non-ABI */ +}; + +/* + * Special "software" events provided by the kernel, even if the hardware + * does not support performance events. These events measure various + * physical and sw events of the kernel (and allow the profiling of them as + * well): + */ +enum perf_sw_ids { + PERF_COUNT_SW_CPU_CLOCK = 0, + PERF_COUNT_SW_TASK_CLOCK = 1, + PERF_COUNT_SW_PAGE_FAULTS = 2, + PERF_COUNT_SW_CONTEXT_SWITCHES = 3, + PERF_COUNT_SW_CPU_MIGRATIONS = 4, + PERF_COUNT_SW_PAGE_FAULTS_MIN = 5, + PERF_COUNT_SW_PAGE_FAULTS_MAJ = 6, + PERF_COUNT_SW_ALIGNMENT_FAULTS = 7, + PERF_COUNT_SW_EMULATION_FAULTS = 8, + PERF_COUNT_SW_DUMMY = 9, + PERF_COUNT_SW_BPF_OUTPUT = 10, + PERF_COUNT_SW_CGROUP_SWITCHES = 11, + + PERF_COUNT_SW_MAX, /* non-ABI */ +}; + +/* + * Bits that can be set in attr.sample_type to request information + * in the overflow packets. + */ +enum perf_event_sample_format { + PERF_SAMPLE_IP = 1U << 0, + PERF_SAMPLE_TID = 1U << 1, + PERF_SAMPLE_TIME = 1U << 2, + PERF_SAMPLE_ADDR = 1U << 3, + PERF_SAMPLE_READ = 1U << 4, + PERF_SAMPLE_CALLCHAIN = 1U << 5, + PERF_SAMPLE_ID = 1U << 6, + PERF_SAMPLE_CPU = 1U << 7, + PERF_SAMPLE_PERIOD = 1U << 8, + PERF_SAMPLE_STREAM_ID = 1U << 9, + PERF_SAMPLE_RAW = 1U << 10, + PERF_SAMPLE_BRANCH_STACK = 1U << 11, + PERF_SAMPLE_REGS_USER = 1U << 12, + PERF_SAMPLE_STACK_USER = 1U << 13, + PERF_SAMPLE_WEIGHT = 1U << 14, + PERF_SAMPLE_DATA_SRC = 1U << 15, + PERF_SAMPLE_IDENTIFIER = 1U << 16, + PERF_SAMPLE_TRANSACTION = 1U << 17, + PERF_SAMPLE_REGS_INTR = 1U << 18, + PERF_SAMPLE_PHYS_ADDR = 1U << 19, + PERF_SAMPLE_AUX = 1U << 20, + PERF_SAMPLE_CGROUP = 1U << 21, + PERF_SAMPLE_DATA_PAGE_SIZE = 1U << 22, + PERF_SAMPLE_CODE_PAGE_SIZE = 1U << 23, + PERF_SAMPLE_WEIGHT_STRUCT = 1U << 24, + + PERF_SAMPLE_MAX = 1U << 25, /* non-ABI */ +}; + +#define PERF_SAMPLE_WEIGHT_TYPE (PERF_SAMPLE_WEIGHT | PERF_SAMPLE_WEIGHT_STRUCT) +/* + * values to program into branch_sample_type when PERF_SAMPLE_BRANCH is set + * + * If the user does not pass priv level information via branch_sample_type, + * the kernel uses the event's priv level. Branch and event priv levels do + * not have to match. Branch priv level is checked for permissions. + * + * The branch types can be combined, however BRANCH_ANY covers all types + * of branches and therefore it supersedes all the other types. + */ +enum perf_branch_sample_type_shift { + PERF_SAMPLE_BRANCH_USER_SHIFT = 0, /* user branches */ + PERF_SAMPLE_BRANCH_KERNEL_SHIFT = 1, /* kernel branches */ + PERF_SAMPLE_BRANCH_HV_SHIFT = 2, /* hypervisor branches */ + + PERF_SAMPLE_BRANCH_ANY_SHIFT = 3, /* any branch types */ + PERF_SAMPLE_BRANCH_ANY_CALL_SHIFT = 4, /* any call branch */ + PERF_SAMPLE_BRANCH_ANY_RETURN_SHIFT = 5, /* any return branch */ + PERF_SAMPLE_BRANCH_IND_CALL_SHIFT = 6, /* indirect calls */ + PERF_SAMPLE_BRANCH_ABORT_TX_SHIFT = 7, /* transaction aborts */ + PERF_SAMPLE_BRANCH_IN_TX_SHIFT = 8, /* in transaction */ + PERF_SAMPLE_BRANCH_NO_TX_SHIFT = 9, /* not in transaction */ + PERF_SAMPLE_BRANCH_COND_SHIFT = 10, /* conditional branches */ + + PERF_SAMPLE_BRANCH_CALL_STACK_SHIFT = 11, /* call/ret stack */ + PERF_SAMPLE_BRANCH_IND_JUMP_SHIFT = 12, /* indirect jumps */ + PERF_SAMPLE_BRANCH_CALL_SHIFT = 13, /* direct call */ + + PERF_SAMPLE_BRANCH_NO_FLAGS_SHIFT = 14, /* no flags */ + PERF_SAMPLE_BRANCH_NO_CYCLES_SHIFT = 15, /* no cycles */ + + PERF_SAMPLE_BRANCH_TYPE_SAVE_SHIFT = 16, /* save branch type */ + + PERF_SAMPLE_BRANCH_HW_INDEX_SHIFT = 17, /* save low level index of raw branch records */ + + PERF_SAMPLE_BRANCH_PRIV_SAVE_SHIFT = 18, /* save privilege mode */ + + PERF_SAMPLE_BRANCH_MAX_SHIFT /* non-ABI */ +}; + +enum perf_branch_sample_type { + PERF_SAMPLE_BRANCH_USER = 1U << PERF_SAMPLE_BRANCH_USER_SHIFT, + PERF_SAMPLE_BRANCH_KERNEL = 1U << PERF_SAMPLE_BRANCH_KERNEL_SHIFT, + PERF_SAMPLE_BRANCH_HV = 1U << PERF_SAMPLE_BRANCH_HV_SHIFT, + + PERF_SAMPLE_BRANCH_ANY = 1U << PERF_SAMPLE_BRANCH_ANY_SHIFT, + PERF_SAMPLE_BRANCH_ANY_CALL = 1U << PERF_SAMPLE_BRANCH_ANY_CALL_SHIFT, + PERF_SAMPLE_BRANCH_ANY_RETURN = 1U << PERF_SAMPLE_BRANCH_ANY_RETURN_SHIFT, + PERF_SAMPLE_BRANCH_IND_CALL = 1U << PERF_SAMPLE_BRANCH_IND_CALL_SHIFT, + PERF_SAMPLE_BRANCH_ABORT_TX = 1U << PERF_SAMPLE_BRANCH_ABORT_TX_SHIFT, + PERF_SAMPLE_BRANCH_IN_TX = 1U << PERF_SAMPLE_BRANCH_IN_TX_SHIFT, + PERF_SAMPLE_BRANCH_NO_TX = 1U << PERF_SAMPLE_BRANCH_NO_TX_SHIFT, + PERF_SAMPLE_BRANCH_COND = 1U << PERF_SAMPLE_BRANCH_COND_SHIFT, + + PERF_SAMPLE_BRANCH_CALL_STACK = 1U << PERF_SAMPLE_BRANCH_CALL_STACK_SHIFT, + PERF_SAMPLE_BRANCH_IND_JUMP = 1U << PERF_SAMPLE_BRANCH_IND_JUMP_SHIFT, + PERF_SAMPLE_BRANCH_CALL = 1U << PERF_SAMPLE_BRANCH_CALL_SHIFT, + + PERF_SAMPLE_BRANCH_NO_FLAGS = 1U << PERF_SAMPLE_BRANCH_NO_FLAGS_SHIFT, + PERF_SAMPLE_BRANCH_NO_CYCLES = 1U << PERF_SAMPLE_BRANCH_NO_CYCLES_SHIFT, + + PERF_SAMPLE_BRANCH_TYPE_SAVE = + 1U << PERF_SAMPLE_BRANCH_TYPE_SAVE_SHIFT, + + PERF_SAMPLE_BRANCH_HW_INDEX = 1U << PERF_SAMPLE_BRANCH_HW_INDEX_SHIFT, + + PERF_SAMPLE_BRANCH_PRIV_SAVE = 1U << PERF_SAMPLE_BRANCH_PRIV_SAVE_SHIFT, + + PERF_SAMPLE_BRANCH_MAX = 1U << PERF_SAMPLE_BRANCH_MAX_SHIFT, +}; + +/* + * Common flow change classification + */ +enum { + PERF_BR_UNKNOWN = 0, /* unknown */ + PERF_BR_COND = 1, /* conditional */ + PERF_BR_UNCOND = 2, /* unconditional */ + PERF_BR_IND = 3, /* indirect */ + PERF_BR_CALL = 4, /* function call */ + PERF_BR_IND_CALL = 5, /* indirect function call */ + PERF_BR_RET = 6, /* function return */ + PERF_BR_SYSCALL = 7, /* syscall */ + PERF_BR_SYSRET = 8, /* syscall return */ + PERF_BR_COND_CALL = 9, /* conditional function call */ + PERF_BR_COND_RET = 10, /* conditional function return */ + PERF_BR_ERET = 11, /* exception return */ + PERF_BR_IRQ = 12, /* irq */ + PERF_BR_SERROR = 13, /* system error */ + PERF_BR_NO_TX = 14, /* not in transaction */ + PERF_BR_EXTEND_ABI = 15, /* extend ABI */ + PERF_BR_MAX, +}; + +/* + * Common branch speculation outcome classification + */ +enum { + PERF_BR_SPEC_NA = 0, /* Not available */ + PERF_BR_SPEC_WRONG_PATH = 1, /* Speculative but on wrong path */ + PERF_BR_NON_SPEC_CORRECT_PATH = 2, /* Non-speculative but on correct path */ + PERF_BR_SPEC_CORRECT_PATH = 3, /* Speculative and on correct path */ + PERF_BR_SPEC_MAX, +}; + +enum { + PERF_BR_NEW_FAULT_ALGN = 0, /* Alignment fault */ + PERF_BR_NEW_FAULT_DATA = 1, /* Data fault */ + PERF_BR_NEW_FAULT_INST = 2, /* Inst fault */ + PERF_BR_NEW_ARCH_1 = 3, /* Architecture specific */ + PERF_BR_NEW_ARCH_2 = 4, /* Architecture specific */ + PERF_BR_NEW_ARCH_3 = 5, /* Architecture specific */ + PERF_BR_NEW_ARCH_4 = 6, /* Architecture specific */ + PERF_BR_NEW_ARCH_5 = 7, /* Architecture specific */ + PERF_BR_NEW_MAX, +}; + +enum { + PERF_BR_PRIV_UNKNOWN = 0, + PERF_BR_PRIV_USER = 1, + PERF_BR_PRIV_KERNEL = 2, + PERF_BR_PRIV_HV = 3, +}; + +#define PERF_BR_ARM64_FIQ PERF_BR_NEW_ARCH_1 +#define PERF_BR_ARM64_DEBUG_HALT PERF_BR_NEW_ARCH_2 +#define PERF_BR_ARM64_DEBUG_EXIT PERF_BR_NEW_ARCH_3 +#define PERF_BR_ARM64_DEBUG_INST PERF_BR_NEW_ARCH_4 +#define PERF_BR_ARM64_DEBUG_DATA PERF_BR_NEW_ARCH_5 + +#define PERF_SAMPLE_BRANCH_PLM_ALL \ + (PERF_SAMPLE_BRANCH_USER|\ + PERF_SAMPLE_BRANCH_KERNEL|\ + PERF_SAMPLE_BRANCH_HV) + +/* + * Values to determine ABI of the registers dump. + */ +enum perf_sample_regs_abi { + PERF_SAMPLE_REGS_ABI_NONE = 0, + PERF_SAMPLE_REGS_ABI_32 = 1, + PERF_SAMPLE_REGS_ABI_64 = 2, +}; + +/* + * Values for the memory transaction event qualifier, mostly for + * abort events. Multiple bits can be set. + */ +enum { + PERF_TXN_ELISION = (1 << 0), /* From elision */ + PERF_TXN_TRANSACTION = (1 << 1), /* From transaction */ + PERF_TXN_SYNC = (1 << 2), /* Instruction is related */ + PERF_TXN_ASYNC = (1 << 3), /* Instruction not related */ + PERF_TXN_RETRY = (1 << 4), /* Retry possible */ + PERF_TXN_CONFLICT = (1 << 5), /* Conflict abort */ + PERF_TXN_CAPACITY_WRITE = (1 << 6), /* Capacity write abort */ + PERF_TXN_CAPACITY_READ = (1 << 7), /* Capacity read abort */ + + PERF_TXN_MAX = (1 << 8), /* non-ABI */ + + /* bits 32..63 are reserved for the abort code */ + + PERF_TXN_ABORT_MASK = (0xffffffffULL << 32), + PERF_TXN_ABORT_SHIFT = 32, +}; + +/* + * The format of the data returned by read() on a perf event fd, + * as specified by attr.read_format: + * + * struct read_format { + * { u64 value; + * { u64 time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED + * { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING + * { u64 id; } && PERF_FORMAT_ID + * { u64 lost; } && PERF_FORMAT_LOST + * } && !PERF_FORMAT_GROUP + * + * { u64 nr; + * { u64 time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED + * { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING + * { u64 value; + * { u64 id; } && PERF_FORMAT_ID + * { u64 lost; } && PERF_FORMAT_LOST + * } cntr[nr]; + * } && PERF_FORMAT_GROUP + * }; + */ +enum perf_event_read_format { + PERF_FORMAT_TOTAL_TIME_ENABLED = 1U << 0, + PERF_FORMAT_TOTAL_TIME_RUNNING = 1U << 1, + PERF_FORMAT_ID = 1U << 2, + PERF_FORMAT_GROUP = 1U << 3, + PERF_FORMAT_LOST = 1U << 4, + + PERF_FORMAT_MAX = 1U << 5, /* non-ABI */ +}; + +#define PERF_ATTR_SIZE_VER0 64 /* sizeof first published struct */ +#define PERF_ATTR_SIZE_VER1 72 /* add: config2 */ +#define PERF_ATTR_SIZE_VER2 80 /* add: branch_sample_type */ +#define PERF_ATTR_SIZE_VER3 96 /* add: sample_regs_user */ + /* add: sample_stack_user */ +#define PERF_ATTR_SIZE_VER4 104 /* add: sample_regs_intr */ +#define PERF_ATTR_SIZE_VER5 112 /* add: aux_watermark */ +#define PERF_ATTR_SIZE_VER6 120 /* add: aux_sample_size */ +#define PERF_ATTR_SIZE_VER7 128 /* add: sig_data */ +#define PERF_ATTR_SIZE_VER8 136 /* add: config3 */ + +/* + * Hardware event_id to monitor via a performance monitoring event: + * + * @sample_max_stack: Max number of frame pointers in a callchain, + * should be < /proc/sys/kernel/perf_event_max_stack + */ +struct perf_event_attr { + + /* + * Major type: hardware/software/tracepoint/etc. + */ + __u32 type; + + /* + * Size of the attr structure, for fwd/bwd compat. + */ + __u32 size; + + /* + * Type specific configuration information. + */ + __u64 config; + + union { + __u64 sample_period; + __u64 sample_freq; + }; + + __u64 sample_type; + __u64 read_format; + + __u64 disabled : 1, /* off by default */ + inherit : 1, /* children inherit it */ + pinned : 1, /* must always be on PMU */ + exclusive : 1, /* only group on PMU */ + exclude_user : 1, /* don't count user */ + exclude_kernel : 1, /* ditto kernel */ + exclude_hv : 1, /* ditto hypervisor */ + exclude_idle : 1, /* don't count when idle */ + mmap : 1, /* include mmap data */ + comm : 1, /* include comm data */ + freq : 1, /* use freq, not period */ + inherit_stat : 1, /* per task counts */ + enable_on_exec : 1, /* next exec enables */ + task : 1, /* trace fork/exit */ + watermark : 1, /* wakeup_watermark */ + /* + * precise_ip: + * + * 0 - SAMPLE_IP can have arbitrary skid + * 1 - SAMPLE_IP must have constant skid + * 2 - SAMPLE_IP requested to have 0 skid + * 3 - SAMPLE_IP must have 0 skid + * + * See also PERF_RECORD_MISC_EXACT_IP + */ + precise_ip : 2, /* skid constraint */ + mmap_data : 1, /* non-exec mmap data */ + sample_id_all : 1, /* sample_type all events */ + + exclude_host : 1, /* don't count in host */ + exclude_guest : 1, /* don't count in guest */ + + exclude_callchain_kernel : 1, /* exclude kernel callchains */ + exclude_callchain_user : 1, /* exclude user callchains */ + mmap2 : 1, /* include mmap with inode data */ + comm_exec : 1, /* flag comm events that are due to an exec */ + use_clockid : 1, /* use @clockid for time fields */ + context_switch : 1, /* context switch data */ + write_backward : 1, /* Write ring buffer from end to beginning */ + namespaces : 1, /* include namespaces data */ + ksymbol : 1, /* include ksymbol events */ + bpf_event : 1, /* include bpf events */ + aux_output : 1, /* generate AUX records instead of events */ + cgroup : 1, /* include cgroup events */ + text_poke : 1, /* include text poke events */ + build_id : 1, /* use build id in mmap2 events */ + inherit_thread : 1, /* children only inherit if cloned with CLONE_THREAD */ + remove_on_exec : 1, /* event is removed from task on exec */ + sigtrap : 1, /* send synchronous SIGTRAP on event */ + __reserved_1 : 26; + + union { + __u32 wakeup_events; /* wakeup every n events */ + __u32 wakeup_watermark; /* bytes before wakeup */ + }; + + __u32 bp_type; + union { + __u64 bp_addr; + __u64 kprobe_func; /* for perf_kprobe */ + __u64 uprobe_path; /* for perf_uprobe */ + __u64 config1; /* extension of config */ + }; + union { + __u64 bp_len; + __u64 kprobe_addr; /* when kprobe_func == NULL */ + __u64 probe_offset; /* for perf_[k,u]probe */ + __u64 config2; /* extension of config1 */ + }; + __u64 branch_sample_type; /* enum perf_branch_sample_type */ + + /* + * Defines set of user regs to dump on samples. + * See asm/perf_regs.h for details. + */ + __u64 sample_regs_user; + + /* + * Defines size of the user stack to dump on samples. + */ + __u32 sample_stack_user; + + __s32 clockid; + /* + * Defines set of regs to dump for each sample + * state captured on: + * - precise = 0: PMU interrupt + * - precise > 0: sampled instruction + * + * See asm/perf_regs.h for details. + */ + __u64 sample_regs_intr; + + /* + * Wakeup watermark for AUX area + */ + __u32 aux_watermark; + __u16 sample_max_stack; + __u16 __reserved_2; + __u32 aux_sample_size; + __u32 __reserved_3; + + /* + * User provided data if sigtrap=1, passed back to user via + * siginfo_t::si_perf_data, e.g. to permit user to identify the event. + * Note, siginfo_t::si_perf_data is long-sized, and sig_data will be + * truncated accordingly on 32 bit architectures. + */ + __u64 sig_data; + + __u64 config3; /* extension of config2 */ +}; + +/* + * Structure used by below PERF_EVENT_IOC_QUERY_BPF command + * to query bpf programs attached to the same perf tracepoint + * as the given perf event. + */ +struct perf_event_query_bpf { + /* + * The below ids array length + */ + __u32 ids_len; + /* + * Set by the kernel to indicate the number of + * available programs + */ + __u32 prog_cnt; + /* + * User provided buffer to store program ids + */ + __u32 ids[]; +}; + +/* + * Ioctls that can be done on a perf event fd: + */ +#define PERF_EVENT_IOC_ENABLE _IO ('$', 0) +#define PERF_EVENT_IOC_DISABLE _IO ('$', 1) +#define PERF_EVENT_IOC_REFRESH _IO ('$', 2) +#define PERF_EVENT_IOC_RESET _IO ('$', 3) +#define PERF_EVENT_IOC_PERIOD _IOW('$', 4, __u64) +#define PERF_EVENT_IOC_SET_OUTPUT _IO ('$', 5) +#define PERF_EVENT_IOC_SET_FILTER _IOW('$', 6, char *) +#define PERF_EVENT_IOC_ID _IOR('$', 7, __u64 *) +#define PERF_EVENT_IOC_SET_BPF _IOW('$', 8, __u32) +#define PERF_EVENT_IOC_PAUSE_OUTPUT _IOW('$', 9, __u32) +#define PERF_EVENT_IOC_QUERY_BPF _IOWR('$', 10, struct perf_event_query_bpf *) +#define PERF_EVENT_IOC_MODIFY_ATTRIBUTES _IOW('$', 11, struct perf_event_attr *) + +enum perf_event_ioc_flags { + PERF_IOC_FLAG_GROUP = 1U << 0, +}; + +/* + * Structure of the page that can be mapped via mmap + */ +struct perf_event_mmap_page { + __u32 version; /* version number of this structure */ + __u32 compat_version; /* lowest version this is compat with */ + + /* + * Bits needed to read the hw events in user-space. + * + * u32 seq, time_mult, time_shift, index, width; + * u64 count, enabled, running; + * u64 cyc, time_offset; + * s64 pmc = 0; + * + * do { + * seq = pc->lock; + * barrier() + * + * enabled = pc->time_enabled; + * running = pc->time_running; + * + * if (pc->cap_usr_time && enabled != running) { + * cyc = rdtsc(); + * time_offset = pc->time_offset; + * time_mult = pc->time_mult; + * time_shift = pc->time_shift; + * } + * + * index = pc->index; + * count = pc->offset; + * if (pc->cap_user_rdpmc && index) { + * width = pc->pmc_width; + * pmc = rdpmc(index - 1); + * } + * + * barrier(); + * } while (pc->lock != seq); + * + * NOTE: for obvious reason this only works on self-monitoring + * processes. + */ + __u32 lock; /* seqlock for synchronization */ + __u32 index; /* hardware event identifier */ + __s64 offset; /* add to hardware event value */ + __u64 time_enabled; /* time event active */ + __u64 time_running; /* time event on cpu */ + union { + __u64 capabilities; + struct { + __u64 cap_bit0 : 1, /* Always 0, deprecated, see commit 860f085b74e9 */ + cap_bit0_is_deprecated : 1, /* Always 1, signals that bit 0 is zero */ + + cap_user_rdpmc : 1, /* The RDPMC instruction can be used to read counts */ + cap_user_time : 1, /* The time_{shift,mult,offset} fields are used */ + cap_user_time_zero : 1, /* The time_zero field is used */ + cap_user_time_short : 1, /* the time_{cycle,mask} fields are used */ + cap_____res : 58; + }; + }; + + /* + * If cap_user_rdpmc this field provides the bit-width of the value + * read using the rdpmc() or equivalent instruction. This can be used + * to sign extend the result like: + * + * pmc <<= 64 - width; + * pmc >>= 64 - width; // signed shift right + * count += pmc; + */ + __u16 pmc_width; + + /* + * If cap_usr_time the below fields can be used to compute the time + * delta since time_enabled (in ns) using rdtsc or similar. + * + * u64 quot, rem; + * u64 delta; + * + * quot = (cyc >> time_shift); + * rem = cyc & (((u64)1 << time_shift) - 1); + * delta = time_offset + quot * time_mult + + * ((rem * time_mult) >> time_shift); + * + * Where time_offset,time_mult,time_shift and cyc are read in the + * seqcount loop described above. This delta can then be added to + * enabled and possible running (if index), improving the scaling: + * + * enabled += delta; + * if (index) + * running += delta; + * + * quot = count / running; + * rem = count % running; + * count = quot * enabled + (rem * enabled) / running; + */ + __u16 time_shift; + __u32 time_mult; + __u64 time_offset; + /* + * If cap_usr_time_zero, the hardware clock (e.g. TSC) can be calculated + * from sample timestamps. + * + * time = timestamp - time_zero; + * quot = time / time_mult; + * rem = time % time_mult; + * cyc = (quot << time_shift) + (rem << time_shift) / time_mult; + * + * And vice versa: + * + * quot = cyc >> time_shift; + * rem = cyc & (((u64)1 << time_shift) - 1); + * timestamp = time_zero + quot * time_mult + + * ((rem * time_mult) >> time_shift); + */ + __u64 time_zero; + + __u32 size; /* Header size up to __reserved[] fields. */ + __u32 __reserved_1; + + /* + * If cap_usr_time_short, the hardware clock is less than 64bit wide + * and we must compute the 'cyc' value, as used by cap_usr_time, as: + * + * cyc = time_cycles + ((cyc - time_cycles) & time_mask) + * + * NOTE: this form is explicitly chosen such that cap_usr_time_short + * is a correction on top of cap_usr_time, and code that doesn't + * know about cap_usr_time_short still works under the assumption + * the counter doesn't wrap. + */ + __u64 time_cycles; + __u64 time_mask; + + /* + * Hole for extension of the self monitor capabilities + */ + + __u8 __reserved[116*8]; /* align to 1k. */ + + /* + * Control data for the mmap() data buffer. + * + * User-space reading the @data_head value should issue an smp_rmb(), + * after reading this value. + * + * When the mapping is PROT_WRITE the @data_tail value should be + * written by userspace to reflect the last read data, after issueing + * an smp_mb() to separate the data read from the ->data_tail store. + * In this case the kernel will not over-write unread data. + * + * See perf_output_put_handle() for the data ordering. + * + * data_{offset,size} indicate the location and size of the perf record + * buffer within the mmapped area. + */ + __u64 data_head; /* head in the data section */ + __u64 data_tail; /* user-space written tail */ + __u64 data_offset; /* where the buffer starts */ + __u64 data_size; /* data buffer size */ + + /* + * AUX area is defined by aux_{offset,size} fields that should be set + * by the userspace, so that + * + * aux_offset >= data_offset + data_size + * + * prior to mmap()ing it. Size of the mmap()ed area should be aux_size. + * + * Ring buffer pointers aux_{head,tail} have the same semantics as + * data_{head,tail} and same ordering rules apply. + */ + __u64 aux_head; + __u64 aux_tail; + __u64 aux_offset; + __u64 aux_size; +}; + +/* + * The current state of perf_event_header::misc bits usage: + * ('|' used bit, '-' unused bit) + * + * 012 CDEF + * |||---------|||| + * + * Where: + * 0-2 CPUMODE_MASK + * + * C PROC_MAP_PARSE_TIMEOUT + * D MMAP_DATA / COMM_EXEC / FORK_EXEC / SWITCH_OUT + * E MMAP_BUILD_ID / EXACT_IP / SCHED_OUT_PREEMPT + * F (reserved) + */ + +#define PERF_RECORD_MISC_CPUMODE_MASK (7 << 0) +#define PERF_RECORD_MISC_CPUMODE_UNKNOWN (0 << 0) +#define PERF_RECORD_MISC_KERNEL (1 << 0) +#define PERF_RECORD_MISC_USER (2 << 0) +#define PERF_RECORD_MISC_HYPERVISOR (3 << 0) +#define PERF_RECORD_MISC_GUEST_KERNEL (4 << 0) +#define PERF_RECORD_MISC_GUEST_USER (5 << 0) + +/* + * Indicates that /proc/PID/maps parsing are truncated by time out. + */ +#define PERF_RECORD_MISC_PROC_MAP_PARSE_TIMEOUT (1 << 12) +/* + * Following PERF_RECORD_MISC_* are used on different + * events, so can reuse the same bit position: + * + * PERF_RECORD_MISC_MMAP_DATA - PERF_RECORD_MMAP* events + * PERF_RECORD_MISC_COMM_EXEC - PERF_RECORD_COMM event + * PERF_RECORD_MISC_FORK_EXEC - PERF_RECORD_FORK event (perf internal) + * PERF_RECORD_MISC_SWITCH_OUT - PERF_RECORD_SWITCH* events + */ +#define PERF_RECORD_MISC_MMAP_DATA (1 << 13) +#define PERF_RECORD_MISC_COMM_EXEC (1 << 13) +#define PERF_RECORD_MISC_FORK_EXEC (1 << 13) +#define PERF_RECORD_MISC_SWITCH_OUT (1 << 13) +/* + * These PERF_RECORD_MISC_* flags below are safely reused + * for the following events: + * + * PERF_RECORD_MISC_EXACT_IP - PERF_RECORD_SAMPLE of precise events + * PERF_RECORD_MISC_SWITCH_OUT_PREEMPT - PERF_RECORD_SWITCH* events + * PERF_RECORD_MISC_MMAP_BUILD_ID - PERF_RECORD_MMAP2 event + * + * + * PERF_RECORD_MISC_EXACT_IP: + * Indicates that the content of PERF_SAMPLE_IP points to + * the actual instruction that triggered the event. See also + * perf_event_attr::precise_ip. + * + * PERF_RECORD_MISC_SWITCH_OUT_PREEMPT: + * Indicates that thread was preempted in TASK_RUNNING state. + * + * PERF_RECORD_MISC_MMAP_BUILD_ID: + * Indicates that mmap2 event carries build id data. + */ +#define PERF_RECORD_MISC_EXACT_IP (1 << 14) +#define PERF_RECORD_MISC_SWITCH_OUT_PREEMPT (1 << 14) +#define PERF_RECORD_MISC_MMAP_BUILD_ID (1 << 14) +/* + * Reserve the last bit to indicate some extended misc field + */ +#define PERF_RECORD_MISC_EXT_RESERVED (1 << 15) + +struct perf_event_header { + __u32 type; + __u16 misc; + __u16 size; +}; + +struct perf_ns_link_info { + __u64 dev; + __u64 ino; +}; + +enum { + NET_NS_INDEX = 0, + UTS_NS_INDEX = 1, + IPC_NS_INDEX = 2, + PID_NS_INDEX = 3, + USER_NS_INDEX = 4, + MNT_NS_INDEX = 5, + CGROUP_NS_INDEX = 6, + + NR_NAMESPACES, /* number of available namespaces */ +}; + +enum perf_event_type { + + /* + * If perf_event_attr.sample_id_all is set then all event types will + * have the sample_type selected fields related to where/when + * (identity) an event took place (TID, TIME, ID, STREAM_ID, CPU, + * IDENTIFIER) described in PERF_RECORD_SAMPLE below, it will be stashed + * just after the perf_event_header and the fields already present for + * the existing fields, i.e. at the end of the payload. That way a newer + * perf.data file will be supported by older perf tools, with these new + * optional fields being ignored. + * + * struct sample_id { + * { u32 pid, tid; } && PERF_SAMPLE_TID + * { u64 time; } && PERF_SAMPLE_TIME + * { u64 id; } && PERF_SAMPLE_ID + * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID + * { u32 cpu, res; } && PERF_SAMPLE_CPU + * { u64 id; } && PERF_SAMPLE_IDENTIFIER + * } && perf_event_attr::sample_id_all + * + * Note that PERF_SAMPLE_IDENTIFIER duplicates PERF_SAMPLE_ID. The + * advantage of PERF_SAMPLE_IDENTIFIER is that its position is fixed + * relative to header.size. + */ + + /* + * The MMAP events record the PROT_EXEC mappings so that we can + * correlate userspace IPs to code. They have the following structure: + * + * struct { + * struct perf_event_header header; + * + * u32 pid, tid; + * u64 addr; + * u64 len; + * u64 pgoff; + * char filename[]; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_MMAP = 1, + + /* + * struct { + * struct perf_event_header header; + * u64 id; + * u64 lost; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_LOST = 2, + + /* + * struct { + * struct perf_event_header header; + * + * u32 pid, tid; + * char comm[]; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_COMM = 3, + + /* + * struct { + * struct perf_event_header header; + * u32 pid, ppid; + * u32 tid, ptid; + * u64 time; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_EXIT = 4, + + /* + * struct { + * struct perf_event_header header; + * u64 time; + * u64 id; + * u64 stream_id; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_THROTTLE = 5, + PERF_RECORD_UNTHROTTLE = 6, + + /* + * struct { + * struct perf_event_header header; + * u32 pid, ppid; + * u32 tid, ptid; + * u64 time; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_FORK = 7, + + /* + * struct { + * struct perf_event_header header; + * u32 pid, tid; + * + * struct read_format values; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_READ = 8, + + /* + * struct { + * struct perf_event_header header; + * + * # + * # Note that PERF_SAMPLE_IDENTIFIER duplicates PERF_SAMPLE_ID. + * # The advantage of PERF_SAMPLE_IDENTIFIER is that its position + * # is fixed relative to header. + * # + * + * { u64 id; } && PERF_SAMPLE_IDENTIFIER + * { u64 ip; } && PERF_SAMPLE_IP + * { u32 pid, tid; } && PERF_SAMPLE_TID + * { u64 time; } && PERF_SAMPLE_TIME + * { u64 addr; } && PERF_SAMPLE_ADDR + * { u64 id; } && PERF_SAMPLE_ID + * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID + * { u32 cpu, res; } && PERF_SAMPLE_CPU + * { u64 period; } && PERF_SAMPLE_PERIOD + * + * { struct read_format values; } && PERF_SAMPLE_READ + * + * { u64 nr, + * u64 ips[nr]; } && PERF_SAMPLE_CALLCHAIN + * + * # + * # The RAW record below is opaque data wrt the ABI + * # + * # That is, the ABI doesn't make any promises wrt to + * # the stability of its content, it may vary depending + * # on event, hardware, kernel version and phase of + * # the moon. + * # + * # In other words, PERF_SAMPLE_RAW contents are not an ABI. + * # + * + * { u32 size; + * char data[size];}&& PERF_SAMPLE_RAW + * + * { u64 nr; + * { u64 hw_idx; } && PERF_SAMPLE_BRANCH_HW_INDEX + * { u64 from, to, flags } lbr[nr]; + * } && PERF_SAMPLE_BRANCH_STACK + * + * { u64 abi; # enum perf_sample_regs_abi + * u64 regs[weight(mask)]; } && PERF_SAMPLE_REGS_USER + * + * { u64 size; + * char data[size]; + * u64 dyn_size; } && PERF_SAMPLE_STACK_USER + * + * { union perf_sample_weight + * { + * u64 full; && PERF_SAMPLE_WEIGHT + * #if defined(__LITTLE_ENDIAN_BITFIELD) + * struct { + * u32 var1_dw; + * u16 var2_w; + * u16 var3_w; + * } && PERF_SAMPLE_WEIGHT_STRUCT + * #elif defined(__BIG_ENDIAN_BITFIELD) + * struct { + * u16 var3_w; + * u16 var2_w; + * u32 var1_dw; + * } && PERF_SAMPLE_WEIGHT_STRUCT + * #endif + * } + * } + * { u64 data_src; } && PERF_SAMPLE_DATA_SRC + * { u64 transaction; } && PERF_SAMPLE_TRANSACTION + * { u64 abi; # enum perf_sample_regs_abi + * u64 regs[weight(mask)]; } && PERF_SAMPLE_REGS_INTR + * { u64 phys_addr;} && PERF_SAMPLE_PHYS_ADDR + * { u64 size; + * char data[size]; } && PERF_SAMPLE_AUX + * { u64 data_page_size;} && PERF_SAMPLE_DATA_PAGE_SIZE + * { u64 code_page_size;} && PERF_SAMPLE_CODE_PAGE_SIZE + * }; + */ + PERF_RECORD_SAMPLE = 9, + + /* + * The MMAP2 records are an augmented version of MMAP, they add + * maj, min, ino numbers to be used to uniquely identify each mapping + * + * struct { + * struct perf_event_header header; + * + * u32 pid, tid; + * u64 addr; + * u64 len; + * u64 pgoff; + * union { + * struct { + * u32 maj; + * u32 min; + * u64 ino; + * u64 ino_generation; + * }; + * struct { + * u8 build_id_size; + * u8 __reserved_1; + * u16 __reserved_2; + * u8 build_id[20]; + * }; + * }; + * u32 prot, flags; + * char filename[]; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_MMAP2 = 10, + + /* + * Records that new data landed in the AUX buffer part. + * + * struct { + * struct perf_event_header header; + * + * u64 aux_offset; + * u64 aux_size; + * u64 flags; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_AUX = 11, + + /* + * Indicates that instruction trace has started + * + * struct { + * struct perf_event_header header; + * u32 pid; + * u32 tid; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_ITRACE_START = 12, + + /* + * Records the dropped/lost sample number. + * + * struct { + * struct perf_event_header header; + * + * u64 lost; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_LOST_SAMPLES = 13, + + /* + * Records a context switch in or out (flagged by + * PERF_RECORD_MISC_SWITCH_OUT). See also + * PERF_RECORD_SWITCH_CPU_WIDE. + * + * struct { + * struct perf_event_header header; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_SWITCH = 14, + + /* + * CPU-wide version of PERF_RECORD_SWITCH with next_prev_pid and + * next_prev_tid that are the next (switching out) or previous + * (switching in) pid/tid. + * + * struct { + * struct perf_event_header header; + * u32 next_prev_pid; + * u32 next_prev_tid; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_SWITCH_CPU_WIDE = 15, + + /* + * struct { + * struct perf_event_header header; + * u32 pid; + * u32 tid; + * u64 nr_namespaces; + * { u64 dev, inode; } [nr_namespaces]; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_NAMESPACES = 16, + + /* + * Record ksymbol register/unregister events: + * + * struct { + * struct perf_event_header header; + * u64 addr; + * u32 len; + * u16 ksym_type; + * u16 flags; + * char name[]; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_KSYMBOL = 17, + + /* + * Record bpf events: + * enum perf_bpf_event_type { + * PERF_BPF_EVENT_UNKNOWN = 0, + * PERF_BPF_EVENT_PROG_LOAD = 1, + * PERF_BPF_EVENT_PROG_UNLOAD = 2, + * }; + * + * struct { + * struct perf_event_header header; + * u16 type; + * u16 flags; + * u32 id; + * u8 tag[BPF_TAG_SIZE]; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_BPF_EVENT = 18, + + /* + * struct { + * struct perf_event_header header; + * u64 id; + * char path[]; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_CGROUP = 19, + + /* + * Records changes to kernel text i.e. self-modified code. 'old_len' is + * the number of old bytes, 'new_len' is the number of new bytes. Either + * 'old_len' or 'new_len' may be zero to indicate, for example, the + * addition or removal of a trampoline. 'bytes' contains the old bytes + * followed immediately by the new bytes. + * + * struct { + * struct perf_event_header header; + * u64 addr; + * u16 old_len; + * u16 new_len; + * u8 bytes[]; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_TEXT_POKE = 20, + + /* + * Data written to the AUX area by hardware due to aux_output, may need + * to be matched to the event by an architecture-specific hardware ID. + * This records the hardware ID, but requires sample_id to provide the + * event ID. e.g. Intel PT uses this record to disambiguate PEBS-via-PT + * records from multiple events. + * + * struct { + * struct perf_event_header header; + * u64 hw_id; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_AUX_OUTPUT_HW_ID = 21, + + PERF_RECORD_MAX, /* non-ABI */ +}; + +enum perf_record_ksymbol_type { + PERF_RECORD_KSYMBOL_TYPE_UNKNOWN = 0, + PERF_RECORD_KSYMBOL_TYPE_BPF = 1, + /* + * Out of line code such as kprobe-replaced instructions or optimized + * kprobes or ftrace trampolines. + */ + PERF_RECORD_KSYMBOL_TYPE_OOL = 2, + PERF_RECORD_KSYMBOL_TYPE_MAX /* non-ABI */ +}; + +#define PERF_RECORD_KSYMBOL_FLAGS_UNREGISTER (1 << 0) + +enum perf_bpf_event_type { + PERF_BPF_EVENT_UNKNOWN = 0, + PERF_BPF_EVENT_PROG_LOAD = 1, + PERF_BPF_EVENT_PROG_UNLOAD = 2, + PERF_BPF_EVENT_MAX, /* non-ABI */ +}; + +#define PERF_MAX_STACK_DEPTH 127 +#define PERF_MAX_CONTEXTS_PER_STACK 8 + +enum perf_callchain_context { + PERF_CONTEXT_HV = (__u64)-32, + PERF_CONTEXT_KERNEL = (__u64)-128, + PERF_CONTEXT_USER = (__u64)-512, + + PERF_CONTEXT_GUEST = (__u64)-2048, + PERF_CONTEXT_GUEST_KERNEL = (__u64)-2176, + PERF_CONTEXT_GUEST_USER = (__u64)-2560, + + PERF_CONTEXT_MAX = (__u64)-4095, +}; + +/** + * PERF_RECORD_AUX::flags bits + */ +#define PERF_AUX_FLAG_TRUNCATED 0x01 /* record was truncated to fit */ +#define PERF_AUX_FLAG_OVERWRITE 0x02 /* snapshot from overwrite mode */ +#define PERF_AUX_FLAG_PARTIAL 0x04 /* record contains gaps */ +#define PERF_AUX_FLAG_COLLISION 0x08 /* sample collided with another */ +#define PERF_AUX_FLAG_PMU_FORMAT_TYPE_MASK 0xff00 /* PMU specific trace format type */ + +/* CoreSight PMU AUX buffer formats */ +#define PERF_AUX_FLAG_CORESIGHT_FORMAT_CORESIGHT 0x0000 /* Default for backward compatibility */ +#define PERF_AUX_FLAG_CORESIGHT_FORMAT_RAW 0x0100 /* Raw format of the source */ + +#define PERF_FLAG_FD_NO_GROUP (1UL << 0) +#define PERF_FLAG_FD_OUTPUT (1UL << 1) +#define PERF_FLAG_PID_CGROUP (1UL << 2) /* pid=cgroup id, per-cpu mode only */ +#define PERF_FLAG_FD_CLOEXEC (1UL << 3) /* O_CLOEXEC */ + +#if defined(__LITTLE_ENDIAN_BITFIELD) +union perf_mem_data_src { + __u64 val; + struct { + __u64 mem_op:5, /* type of opcode */ + mem_lvl:14, /* memory hierarchy level */ + mem_snoop:5, /* snoop mode */ + mem_lock:2, /* lock instr */ + mem_dtlb:7, /* tlb access */ + mem_lvl_num:4, /* memory hierarchy level number */ + mem_remote:1, /* remote */ + mem_snoopx:2, /* snoop mode, ext */ + mem_blk:3, /* access blocked */ + mem_hops:3, /* hop level */ + mem_rsvd:18; + }; +}; +#elif defined(__BIG_ENDIAN_BITFIELD) +union perf_mem_data_src { + __u64 val; + struct { + __u64 mem_rsvd:18, + mem_hops:3, /* hop level */ + mem_blk:3, /* access blocked */ + mem_snoopx:2, /* snoop mode, ext */ + mem_remote:1, /* remote */ + mem_lvl_num:4, /* memory hierarchy level number */ + mem_dtlb:7, /* tlb access */ + mem_lock:2, /* lock instr */ + mem_snoop:5, /* snoop mode */ + mem_lvl:14, /* memory hierarchy level */ + mem_op:5; /* type of opcode */ + }; +}; +#else +#error "Unknown endianness" +#endif + +/* type of opcode (load/store/prefetch,code) */ +#define PERF_MEM_OP_NA 0x01 /* not available */ +#define PERF_MEM_OP_LOAD 0x02 /* load instruction */ +#define PERF_MEM_OP_STORE 0x04 /* store instruction */ +#define PERF_MEM_OP_PFETCH 0x08 /* prefetch */ +#define PERF_MEM_OP_EXEC 0x10 /* code (execution) */ +#define PERF_MEM_OP_SHIFT 0 + +/* + * PERF_MEM_LVL_* namespace being depricated to some extent in the + * favour of newer composite PERF_MEM_{LVLNUM_,REMOTE_,SNOOPX_} fields. + * Supporting this namespace inorder to not break defined ABIs. + * + * memory hierarchy (memory level, hit or miss) + */ +#define PERF_MEM_LVL_NA 0x01 /* not available */ +#define PERF_MEM_LVL_HIT 0x02 /* hit level */ +#define PERF_MEM_LVL_MISS 0x04 /* miss level */ +#define PERF_MEM_LVL_L1 0x08 /* L1 */ +#define PERF_MEM_LVL_LFB 0x10 /* Line Fill Buffer */ +#define PERF_MEM_LVL_L2 0x20 /* L2 */ +#define PERF_MEM_LVL_L3 0x40 /* L3 */ +#define PERF_MEM_LVL_LOC_RAM 0x80 /* Local DRAM */ +#define PERF_MEM_LVL_REM_RAM1 0x100 /* Remote DRAM (1 hop) */ +#define PERF_MEM_LVL_REM_RAM2 0x200 /* Remote DRAM (2 hops) */ +#define PERF_MEM_LVL_REM_CCE1 0x400 /* Remote Cache (1 hop) */ +#define PERF_MEM_LVL_REM_CCE2 0x800 /* Remote Cache (2 hops) */ +#define PERF_MEM_LVL_IO 0x1000 /* I/O memory */ +#define PERF_MEM_LVL_UNC 0x2000 /* Uncached memory */ +#define PERF_MEM_LVL_SHIFT 5 + +#define PERF_MEM_REMOTE_REMOTE 0x01 /* Remote */ +#define PERF_MEM_REMOTE_SHIFT 37 + +#define PERF_MEM_LVLNUM_L1 0x01 /* L1 */ +#define PERF_MEM_LVLNUM_L2 0x02 /* L2 */ +#define PERF_MEM_LVLNUM_L3 0x03 /* L3 */ +#define PERF_MEM_LVLNUM_L4 0x04 /* L4 */ +/* 5-0x7 available */ +#define PERF_MEM_LVLNUM_UNC 0x08 /* Uncached */ +#define PERF_MEM_LVLNUM_CXL 0x09 /* CXL */ +#define PERF_MEM_LVLNUM_IO 0x0a /* I/O */ +#define PERF_MEM_LVLNUM_ANY_CACHE 0x0b /* Any cache */ +#define PERF_MEM_LVLNUM_LFB 0x0c /* LFB */ +#define PERF_MEM_LVLNUM_RAM 0x0d /* RAM */ +#define PERF_MEM_LVLNUM_PMEM 0x0e /* PMEM */ +#define PERF_MEM_LVLNUM_NA 0x0f /* N/A */ + +#define PERF_MEM_LVLNUM_SHIFT 33 + +/* snoop mode */ +#define PERF_MEM_SNOOP_NA 0x01 /* not available */ +#define PERF_MEM_SNOOP_NONE 0x02 /* no snoop */ +#define PERF_MEM_SNOOP_HIT 0x04 /* snoop hit */ +#define PERF_MEM_SNOOP_MISS 0x08 /* snoop miss */ +#define PERF_MEM_SNOOP_HITM 0x10 /* snoop hit modified */ +#define PERF_MEM_SNOOP_SHIFT 19 + +#define PERF_MEM_SNOOPX_FWD 0x01 /* forward */ +#define PERF_MEM_SNOOPX_PEER 0x02 /* xfer from peer */ +#define PERF_MEM_SNOOPX_SHIFT 38 + +/* locked instruction */ +#define PERF_MEM_LOCK_NA 0x01 /* not available */ +#define PERF_MEM_LOCK_LOCKED 0x02 /* locked transaction */ +#define PERF_MEM_LOCK_SHIFT 24 + +/* TLB access */ +#define PERF_MEM_TLB_NA 0x01 /* not available */ +#define PERF_MEM_TLB_HIT 0x02 /* hit level */ +#define PERF_MEM_TLB_MISS 0x04 /* miss level */ +#define PERF_MEM_TLB_L1 0x08 /* L1 */ +#define PERF_MEM_TLB_L2 0x10 /* L2 */ +#define PERF_MEM_TLB_WK 0x20 /* Hardware Walker*/ +#define PERF_MEM_TLB_OS 0x40 /* OS fault handler */ +#define PERF_MEM_TLB_SHIFT 26 + +/* Access blocked */ +#define PERF_MEM_BLK_NA 0x01 /* not available */ +#define PERF_MEM_BLK_DATA 0x02 /* data could not be forwarded */ +#define PERF_MEM_BLK_ADDR 0x04 /* address conflict */ +#define PERF_MEM_BLK_SHIFT 40 + +/* hop level */ +#define PERF_MEM_HOPS_0 0x01 /* remote core, same node */ +#define PERF_MEM_HOPS_1 0x02 /* remote node, same socket */ +#define PERF_MEM_HOPS_2 0x03 /* remote socket, same board */ +#define PERF_MEM_HOPS_3 0x04 /* remote board */ +/* 5-7 available */ +#define PERF_MEM_HOPS_SHIFT 43 + +#define PERF_MEM_S(a, s) \ + (((__u64)PERF_MEM_##a##_##s) << PERF_MEM_##a##_SHIFT) + +/* + * single taken branch record layout: + * + * from: source instruction (may not always be a branch insn) + * to: branch target + * mispred: branch target was mispredicted + * predicted: branch target was predicted + * + * support for mispred, predicted is optional. In case it + * is not supported mispred = predicted = 0. + * + * in_tx: running in a hardware transaction + * abort: aborting a hardware transaction + * cycles: cycles from last branch (or 0 if not supported) + * type: branch type + * spec: branch speculation info (or 0 if not supported) + */ +struct perf_branch_entry { + __u64 from; + __u64 to; + __u64 mispred:1, /* target mispredicted */ + predicted:1,/* target predicted */ + in_tx:1, /* in transaction */ + abort:1, /* transaction abort */ + cycles:16, /* cycle count to last branch */ + type:4, /* branch type */ + spec:2, /* branch speculation info */ + new_type:4, /* additional branch type */ + priv:3, /* privilege level */ + reserved:31; +}; + +union perf_sample_weight { + __u64 full; +#if defined(__LITTLE_ENDIAN_BITFIELD) + struct { + __u32 var1_dw; + __u16 var2_w; + __u16 var3_w; + }; +#elif defined(__BIG_ENDIAN_BITFIELD) + struct { + __u16 var3_w; + __u16 var2_w; + __u32 var1_dw; + }; +#else +#error "Unknown endianness" +#endif +}; + +#endif /* _UAPI_LINUX_PERF_EVENT_H */ |