diff options
Diffstat (limited to 'include/uapi/linux/surface_aggregator')
| -rw-r--r-- | include/uapi/linux/surface_aggregator/cdev.h | 147 | ||||
| -rw-r--r-- | include/uapi/linux/surface_aggregator/dtx.h | 146 |
2 files changed, 293 insertions, 0 deletions
diff --git a/include/uapi/linux/surface_aggregator/cdev.h b/include/uapi/linux/surface_aggregator/cdev.h new file mode 100644 index 000000000..08f46b60b --- /dev/null +++ b/include/uapi/linux/surface_aggregator/cdev.h @@ -0,0 +1,147 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * Surface System Aggregator Module (SSAM) user-space EC interface. + * + * Definitions, structs, and IOCTLs for the /dev/surface/aggregator misc + * device. This device provides direct user-space access to the SSAM EC. + * Intended for debugging and development. + * + * Copyright (C) 2020-2021 Maximilian Luz <luzmaximilian@gmail.com> + */ + +#ifndef _UAPI_LINUX_SURFACE_AGGREGATOR_CDEV_H +#define _UAPI_LINUX_SURFACE_AGGREGATOR_CDEV_H + +#include <linux/ioctl.h> +#include <linux/types.h> + +/** + * enum ssam_cdev_request_flags - Request flags for SSAM cdev request IOCTL. + * + * @SSAM_CDEV_REQUEST_HAS_RESPONSE: + * Specifies that the request expects a response. If not set, the request + * will be directly completed after its underlying packet has been + * transmitted. If set, the request transport system waits for a response + * of the request. + * + * @SSAM_CDEV_REQUEST_UNSEQUENCED: + * Specifies that the request should be transmitted via an unsequenced + * packet. If set, the request must not have a response, meaning that this + * flag and the %SSAM_CDEV_REQUEST_HAS_RESPONSE flag are mutually + * exclusive. + */ +enum ssam_cdev_request_flags { + SSAM_CDEV_REQUEST_HAS_RESPONSE = 0x01, + SSAM_CDEV_REQUEST_UNSEQUENCED = 0x02, +}; + +/** + * struct ssam_cdev_request - Controller request IOCTL argument. + * @target_category: Target category of the SAM request. + * @target_id: Target ID of the SAM request. + * @command_id: Command ID of the SAM request. + * @instance_id: Instance ID of the SAM request. + * @flags: Request flags (see &enum ssam_cdev_request_flags). + * @status: Request status (output). + * @payload: Request payload (input data). + * @payload.data: Pointer to request payload data. + * @payload.length: Length of request payload data (in bytes). + * @response: Request response (output data). + * @response.data: Pointer to response buffer. + * @response.length: On input: Capacity of response buffer (in bytes). + * On output: Length of request response (number of bytes + * in the buffer that are actually used). + */ +struct ssam_cdev_request { + __u8 target_category; + __u8 target_id; + __u8 command_id; + __u8 instance_id; + __u16 flags; + __s16 status; + + struct { + __u64 data; + __u16 length; + __u8 __pad[6]; + } payload; + + struct { + __u64 data; + __u16 length; + __u8 __pad[6]; + } response; +} __attribute__((__packed__)); + +/** + * struct ssam_cdev_notifier_desc - Notifier descriptor. + * @priority: Priority value determining the order in which notifier + * callbacks will be called. A higher value means higher + * priority, i.e. the associated callback will be executed + * earlier than other (lower priority) callbacks. + * @target_category: The event target category for which this notifier should + * receive events. + * + * Specifies the notifier that should be registered or unregistered, + * specifically with which priority and for which target category of events. + */ +struct ssam_cdev_notifier_desc { + __s32 priority; + __u8 target_category; +} __attribute__((__packed__)); + +/** + * struct ssam_cdev_event_desc - Event descriptor. + * @reg: Registry via which the event will be enabled/disabled. + * @reg.target_category: Target category for the event registry requests. + * @reg.target_id: Target ID for the event registry requests. + * @reg.cid_enable: Command ID for the event-enable request. + * @reg.cid_disable: Command ID for the event-disable request. + * @id: ID specifying the event. + * @id.target_category: Target category of the event source. + * @id.instance: Instance ID of the event source. + * @flags: Flags used for enabling the event. + * + * Specifies which event should be enabled/disabled and how to do that. + */ +struct ssam_cdev_event_desc { + struct { + __u8 target_category; + __u8 target_id; + __u8 cid_enable; + __u8 cid_disable; + } reg; + + struct { + __u8 target_category; + __u8 instance; + } id; + + __u8 flags; +} __attribute__((__packed__)); + +/** + * struct ssam_cdev_event - SSAM event sent by the EC. + * @target_category: Target category of the event source. See &enum ssam_ssh_tc. + * @target_id: Target ID of the event source. + * @command_id: Command ID of the event. + * @instance_id: Instance ID of the event source. + * @length: Length of the event payload in bytes. + * @data: Event payload data. + */ +struct ssam_cdev_event { + __u8 target_category; + __u8 target_id; + __u8 command_id; + __u8 instance_id; + __u16 length; + __u8 data[]; +} __attribute__((__packed__)); + +#define SSAM_CDEV_REQUEST _IOWR(0xA5, 1, struct ssam_cdev_request) +#define SSAM_CDEV_NOTIF_REGISTER _IOW(0xA5, 2, struct ssam_cdev_notifier_desc) +#define SSAM_CDEV_NOTIF_UNREGISTER _IOW(0xA5, 3, struct ssam_cdev_notifier_desc) +#define SSAM_CDEV_EVENT_ENABLE _IOW(0xA5, 4, struct ssam_cdev_event_desc) +#define SSAM_CDEV_EVENT_DISABLE _IOW(0xA5, 5, struct ssam_cdev_event_desc) + +#endif /* _UAPI_LINUX_SURFACE_AGGREGATOR_CDEV_H */ diff --git a/include/uapi/linux/surface_aggregator/dtx.h b/include/uapi/linux/surface_aggregator/dtx.h new file mode 100644 index 000000000..0833aab0d --- /dev/null +++ b/include/uapi/linux/surface_aggregator/dtx.h @@ -0,0 +1,146 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * Surface DTX (clipboard detachment system driver) user-space interface. + * + * Definitions, structs, and IOCTLs for the /dev/surface/dtx misc device. This + * device allows user-space to control the clipboard detachment process on + * Surface Book series devices. + * + * Copyright (C) 2020-2021 Maximilian Luz <luzmaximilian@gmail.com> + */ + +#ifndef _UAPI_LINUX_SURFACE_AGGREGATOR_DTX_H +#define _UAPI_LINUX_SURFACE_AGGREGATOR_DTX_H + +#include <linux/ioctl.h> +#include <linux/types.h> + +/* Status/error categories */ +#define SDTX_CATEGORY_STATUS 0x0000 +#define SDTX_CATEGORY_RUNTIME_ERROR 0x1000 +#define SDTX_CATEGORY_HARDWARE_ERROR 0x2000 +#define SDTX_CATEGORY_UNKNOWN 0xf000 + +#define SDTX_CATEGORY_MASK 0xf000 +#define SDTX_CATEGORY(value) ((value) & SDTX_CATEGORY_MASK) + +#define SDTX_STATUS(code) ((code) | SDTX_CATEGORY_STATUS) +#define SDTX_ERR_RT(code) ((code) | SDTX_CATEGORY_RUNTIME_ERROR) +#define SDTX_ERR_HW(code) ((code) | SDTX_CATEGORY_HARDWARE_ERROR) +#define SDTX_UNKNOWN(code) ((code) | SDTX_CATEGORY_UNKNOWN) + +#define SDTX_SUCCESS(value) (SDTX_CATEGORY(value) == SDTX_CATEGORY_STATUS) + +/* Latch status values */ +#define SDTX_LATCH_CLOSED SDTX_STATUS(0x00) +#define SDTX_LATCH_OPENED SDTX_STATUS(0x01) + +/* Base state values */ +#define SDTX_BASE_DETACHED SDTX_STATUS(0x00) +#define SDTX_BASE_ATTACHED SDTX_STATUS(0x01) + +/* Runtime errors (non-critical) */ +#define SDTX_DETACH_NOT_FEASIBLE SDTX_ERR_RT(0x01) +#define SDTX_DETACH_TIMEDOUT SDTX_ERR_RT(0x02) + +/* Hardware errors (critical) */ +#define SDTX_ERR_FAILED_TO_OPEN SDTX_ERR_HW(0x01) +#define SDTX_ERR_FAILED_TO_REMAIN_OPEN SDTX_ERR_HW(0x02) +#define SDTX_ERR_FAILED_TO_CLOSE SDTX_ERR_HW(0x03) + +/* Base types */ +#define SDTX_DEVICE_TYPE_HID 0x0100 +#define SDTX_DEVICE_TYPE_SSH 0x0200 + +#define SDTX_DEVICE_TYPE_MASK 0x0f00 +#define SDTX_DEVICE_TYPE(value) ((value) & SDTX_DEVICE_TYPE_MASK) + +#define SDTX_BASE_TYPE_HID(id) ((id) | SDTX_DEVICE_TYPE_HID) +#define SDTX_BASE_TYPE_SSH(id) ((id) | SDTX_DEVICE_TYPE_SSH) + +/** + * enum sdtx_device_mode - Mode describing how (and if) the clipboard is + * attached to the base of the device. + * @SDTX_DEVICE_MODE_TABLET: The clipboard is detached from the base and the + * device operates as tablet. + * @SDTX_DEVICE_MODE_LAPTOP: The clipboard is attached normally to the base + * and the device operates as laptop. + * @SDTX_DEVICE_MODE_STUDIO: The clipboard is attached to the base in reverse. + * The device operates as tablet with keyboard and + * touchpad deactivated, however, the base battery + * and, if present in the specific device model, dGPU + * are available to the system. + */ +enum sdtx_device_mode { + SDTX_DEVICE_MODE_TABLET = 0x00, + SDTX_DEVICE_MODE_LAPTOP = 0x01, + SDTX_DEVICE_MODE_STUDIO = 0x02, +}; + +/** + * struct sdtx_event - Event provided by reading from the DTX device file. + * @length: Length of the event payload, in bytes. + * @code: Event code, detailing what type of event this is. + * @data: Payload of the event, containing @length bytes. + * + * See &enum sdtx_event_code for currently valid event codes. + */ +struct sdtx_event { + __u16 length; + __u16 code; + __u8 data[]; +} __attribute__((__packed__)); + +/** + * enum sdtx_event_code - Code describing the type of an event. + * @SDTX_EVENT_REQUEST: Detachment request event type. + * @SDTX_EVENT_CANCEL: Cancel detachment process event type. + * @SDTX_EVENT_BASE_CONNECTION: Base/clipboard connection change event type. + * @SDTX_EVENT_LATCH_STATUS: Latch status change event type. + * @SDTX_EVENT_DEVICE_MODE: Device mode change event type. + * + * Used in &struct sdtx_event to describe the type of the event. Further event + * codes are reserved for future use. Any event parser should be able to + * gracefully handle unknown events, i.e. by simply skipping them. + * + * Consult the DTX user-space interface documentation for details regarding + * the individual event types. + */ +enum sdtx_event_code { + SDTX_EVENT_REQUEST = 1, + SDTX_EVENT_CANCEL = 2, + SDTX_EVENT_BASE_CONNECTION = 3, + SDTX_EVENT_LATCH_STATUS = 4, + SDTX_EVENT_DEVICE_MODE = 5, +}; + +/** + * struct sdtx_base_info - Describes if and what type of base is connected. + * @state: The state of the connection. Valid values are %SDTX_BASE_DETACHED, + * %SDTX_BASE_ATTACHED, and %SDTX_DETACH_NOT_FEASIBLE (in case a base + * is attached but low clipboard battery prevents detachment). Other + * values are currently reserved. + * @base_id: The type of base connected. Zero if no base is connected. + */ +struct sdtx_base_info { + __u16 state; + __u16 base_id; +} __attribute__((__packed__)); + +/* IOCTLs */ +#define SDTX_IOCTL_EVENTS_ENABLE _IO(0xa5, 0x21) +#define SDTX_IOCTL_EVENTS_DISABLE _IO(0xa5, 0x22) + +#define SDTX_IOCTL_LATCH_LOCK _IO(0xa5, 0x23) +#define SDTX_IOCTL_LATCH_UNLOCK _IO(0xa5, 0x24) + +#define SDTX_IOCTL_LATCH_REQUEST _IO(0xa5, 0x25) +#define SDTX_IOCTL_LATCH_CONFIRM _IO(0xa5, 0x26) +#define SDTX_IOCTL_LATCH_HEARTBEAT _IO(0xa5, 0x27) +#define SDTX_IOCTL_LATCH_CANCEL _IO(0xa5, 0x28) + +#define SDTX_IOCTL_GET_BASE_INFO _IOR(0xa5, 0x29, struct sdtx_base_info) +#define SDTX_IOCTL_GET_DEVICE_MODE _IOR(0xa5, 0x2a, __u16) +#define SDTX_IOCTL_GET_LATCH_STATUS _IOR(0xa5, 0x2b, __u16) + +#endif /* _UAPI_LINUX_SURFACE_AGGREGATOR_DTX_H */ |