summaryrefslogtreecommitdiffstats
path: root/net/bluetooth/hci_request.c
diff options
context:
space:
mode:
Diffstat (limited to 'net/bluetooth/hci_request.c')
-rw-r--r--net/bluetooth/hci_request.c901
1 files changed, 901 insertions, 0 deletions
diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c
new file mode 100644
index 000000000..6e023b010
--- /dev/null
+++ b/net/bluetooth/hci_request.c
@@ -0,0 +1,901 @@
+/*
+ BlueZ - Bluetooth protocol stack for Linux
+
+ Copyright (C) 2014 Intel Corporation
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License version 2 as
+ published by the Free Software Foundation;
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+ IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+ CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
+ WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+ ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
+ COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
+ SOFTWARE IS DISCLAIMED.
+*/
+
+#include <linux/sched/signal.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+#include <net/bluetooth/mgmt.h>
+
+#include "smp.h"
+#include "hci_request.h"
+#include "msft.h"
+#include "eir.h"
+
+void hci_req_init(struct hci_request *req, struct hci_dev *hdev)
+{
+ skb_queue_head_init(&req->cmd_q);
+ req->hdev = hdev;
+ req->err = 0;
+}
+
+void hci_req_purge(struct hci_request *req)
+{
+ skb_queue_purge(&req->cmd_q);
+}
+
+bool hci_req_status_pend(struct hci_dev *hdev)
+{
+ return hdev->req_status == HCI_REQ_PEND;
+}
+
+static int req_run(struct hci_request *req, hci_req_complete_t complete,
+ hci_req_complete_skb_t complete_skb)
+{
+ struct hci_dev *hdev = req->hdev;
+ struct sk_buff *skb;
+ unsigned long flags;
+
+ bt_dev_dbg(hdev, "length %u", skb_queue_len(&req->cmd_q));
+
+ /* If an error occurred during request building, remove all HCI
+ * commands queued on the HCI request queue.
+ */
+ if (req->err) {
+ skb_queue_purge(&req->cmd_q);
+ return req->err;
+ }
+
+ /* Do not allow empty requests */
+ if (skb_queue_empty(&req->cmd_q))
+ return -ENODATA;
+
+ skb = skb_peek_tail(&req->cmd_q);
+ if (complete) {
+ bt_cb(skb)->hci.req_complete = complete;
+ } else if (complete_skb) {
+ bt_cb(skb)->hci.req_complete_skb = complete_skb;
+ bt_cb(skb)->hci.req_flags |= HCI_REQ_SKB;
+ }
+
+ spin_lock_irqsave(&hdev->cmd_q.lock, flags);
+ skb_queue_splice_tail(&req->cmd_q, &hdev->cmd_q);
+ spin_unlock_irqrestore(&hdev->cmd_q.lock, flags);
+
+ queue_work(hdev->workqueue, &hdev->cmd_work);
+
+ return 0;
+}
+
+int hci_req_run(struct hci_request *req, hci_req_complete_t complete)
+{
+ return req_run(req, complete, NULL);
+}
+
+int hci_req_run_skb(struct hci_request *req, hci_req_complete_skb_t complete)
+{
+ return req_run(req, NULL, complete);
+}
+
+void hci_req_sync_complete(struct hci_dev *hdev, u8 result, u16 opcode,
+ struct sk_buff *skb)
+{
+ bt_dev_dbg(hdev, "result 0x%2.2x", result);
+
+ if (hdev->req_status == HCI_REQ_PEND) {
+ hdev->req_result = result;
+ hdev->req_status = HCI_REQ_DONE;
+ if (skb)
+ hdev->req_skb = skb_get(skb);
+ wake_up_interruptible(&hdev->req_wait_q);
+ }
+}
+
+/* Execute request and wait for completion. */
+int __hci_req_sync(struct hci_dev *hdev, int (*func)(struct hci_request *req,
+ unsigned long opt),
+ unsigned long opt, u32 timeout, u8 *hci_status)
+{
+ struct hci_request req;
+ int err = 0;
+
+ bt_dev_dbg(hdev, "start");
+
+ hci_req_init(&req, hdev);
+
+ hdev->req_status = HCI_REQ_PEND;
+
+ err = func(&req, opt);
+ if (err) {
+ if (hci_status)
+ *hci_status = HCI_ERROR_UNSPECIFIED;
+ return err;
+ }
+
+ err = hci_req_run_skb(&req, hci_req_sync_complete);
+ if (err < 0) {
+ hdev->req_status = 0;
+
+ /* ENODATA means the HCI request command queue is empty.
+ * This can happen when a request with conditionals doesn't
+ * trigger any commands to be sent. This is normal behavior
+ * and should not trigger an error return.
+ */
+ if (err == -ENODATA) {
+ if (hci_status)
+ *hci_status = 0;
+ return 0;
+ }
+
+ if (hci_status)
+ *hci_status = HCI_ERROR_UNSPECIFIED;
+
+ return err;
+ }
+
+ err = wait_event_interruptible_timeout(hdev->req_wait_q,
+ hdev->req_status != HCI_REQ_PEND, timeout);
+
+ if (err == -ERESTARTSYS)
+ return -EINTR;
+
+ switch (hdev->req_status) {
+ case HCI_REQ_DONE:
+ err = -bt_to_errno(hdev->req_result);
+ if (hci_status)
+ *hci_status = hdev->req_result;
+ break;
+
+ case HCI_REQ_CANCELED:
+ err = -hdev->req_result;
+ if (hci_status)
+ *hci_status = HCI_ERROR_UNSPECIFIED;
+ break;
+
+ default:
+ err = -ETIMEDOUT;
+ if (hci_status)
+ *hci_status = HCI_ERROR_UNSPECIFIED;
+ break;
+ }
+
+ kfree_skb(hdev->req_skb);
+ hdev->req_skb = NULL;
+ hdev->req_status = hdev->req_result = 0;
+
+ bt_dev_dbg(hdev, "end: err %d", err);
+
+ return err;
+}
+
+int hci_req_sync(struct hci_dev *hdev, int (*req)(struct hci_request *req,
+ unsigned long opt),
+ unsigned long opt, u32 timeout, u8 *hci_status)
+{
+ int ret;
+
+ /* Serialize all requests */
+ hci_req_sync_lock(hdev);
+ /* check the state after obtaing the lock to protect the HCI_UP
+ * against any races from hci_dev_do_close when the controller
+ * gets removed.
+ */
+ if (test_bit(HCI_UP, &hdev->flags))
+ ret = __hci_req_sync(hdev, req, opt, timeout, hci_status);
+ else
+ ret = -ENETDOWN;
+ hci_req_sync_unlock(hdev);
+
+ return ret;
+}
+
+struct sk_buff *hci_prepare_cmd(struct hci_dev *hdev, u16 opcode, u32 plen,
+ const void *param)
+{
+ int len = HCI_COMMAND_HDR_SIZE + plen;
+ struct hci_command_hdr *hdr;
+ struct sk_buff *skb;
+
+ skb = bt_skb_alloc(len, GFP_ATOMIC);
+ if (!skb)
+ return NULL;
+
+ hdr = skb_put(skb, HCI_COMMAND_HDR_SIZE);
+ hdr->opcode = cpu_to_le16(opcode);
+ hdr->plen = plen;
+
+ if (plen)
+ skb_put_data(skb, param, plen);
+
+ bt_dev_dbg(hdev, "skb len %d", skb->len);
+
+ hci_skb_pkt_type(skb) = HCI_COMMAND_PKT;
+ hci_skb_opcode(skb) = opcode;
+
+ return skb;
+}
+
+/* Queue a command to an asynchronous HCI request */
+void hci_req_add_ev(struct hci_request *req, u16 opcode, u32 plen,
+ const void *param, u8 event)
+{
+ struct hci_dev *hdev = req->hdev;
+ struct sk_buff *skb;
+
+ bt_dev_dbg(hdev, "opcode 0x%4.4x plen %d", opcode, plen);
+
+ /* If an error occurred during request building, there is no point in
+ * queueing the HCI command. We can simply return.
+ */
+ if (req->err)
+ return;
+
+ skb = hci_prepare_cmd(hdev, opcode, plen, param);
+ if (!skb) {
+ bt_dev_err(hdev, "no memory for command (opcode 0x%4.4x)",
+ opcode);
+ req->err = -ENOMEM;
+ return;
+ }
+
+ if (skb_queue_empty(&req->cmd_q))
+ bt_cb(skb)->hci.req_flags |= HCI_REQ_START;
+
+ hci_skb_event(skb) = event;
+
+ skb_queue_tail(&req->cmd_q, skb);
+}
+
+void hci_req_add(struct hci_request *req, u16 opcode, u32 plen,
+ const void *param)
+{
+ bt_dev_dbg(req->hdev, "HCI_REQ-0x%4.4x", opcode);
+ hci_req_add_ev(req, opcode, plen, param, 0);
+}
+
+static void start_interleave_scan(struct hci_dev *hdev)
+{
+ hdev->interleave_scan_state = INTERLEAVE_SCAN_NO_FILTER;
+ queue_delayed_work(hdev->req_workqueue,
+ &hdev->interleave_scan, 0);
+}
+
+static bool is_interleave_scanning(struct hci_dev *hdev)
+{
+ return hdev->interleave_scan_state != INTERLEAVE_SCAN_NONE;
+}
+
+static void cancel_interleave_scan(struct hci_dev *hdev)
+{
+ bt_dev_dbg(hdev, "cancelling interleave scan");
+
+ cancel_delayed_work_sync(&hdev->interleave_scan);
+
+ hdev->interleave_scan_state = INTERLEAVE_SCAN_NONE;
+}
+
+/* Return true if interleave_scan wasn't started until exiting this function,
+ * otherwise, return false
+ */
+static bool __hci_update_interleaved_scan(struct hci_dev *hdev)
+{
+ /* Do interleaved scan only if all of the following are true:
+ * - There is at least one ADV monitor
+ * - At least one pending LE connection or one device to be scanned for
+ * - Monitor offloading is not supported
+ * If so, we should alternate between allowlist scan and one without
+ * any filters to save power.
+ */
+ bool use_interleaving = hci_is_adv_monitoring(hdev) &&
+ !(list_empty(&hdev->pend_le_conns) &&
+ list_empty(&hdev->pend_le_reports)) &&
+ hci_get_adv_monitor_offload_ext(hdev) ==
+ HCI_ADV_MONITOR_EXT_NONE;
+ bool is_interleaving = is_interleave_scanning(hdev);
+
+ if (use_interleaving && !is_interleaving) {
+ start_interleave_scan(hdev);
+ bt_dev_dbg(hdev, "starting interleave scan");
+ return true;
+ }
+
+ if (!use_interleaving && is_interleaving)
+ cancel_interleave_scan(hdev);
+
+ return false;
+}
+
+void hci_req_add_le_scan_disable(struct hci_request *req, bool rpa_le_conn)
+{
+ struct hci_dev *hdev = req->hdev;
+
+ if (hdev->scanning_paused) {
+ bt_dev_dbg(hdev, "Scanning is paused for suspend");
+ return;
+ }
+
+ if (use_ext_scan(hdev)) {
+ struct hci_cp_le_set_ext_scan_enable cp;
+
+ memset(&cp, 0, sizeof(cp));
+ cp.enable = LE_SCAN_DISABLE;
+ hci_req_add(req, HCI_OP_LE_SET_EXT_SCAN_ENABLE, sizeof(cp),
+ &cp);
+ } else {
+ struct hci_cp_le_set_scan_enable cp;
+
+ memset(&cp, 0, sizeof(cp));
+ cp.enable = LE_SCAN_DISABLE;
+ hci_req_add(req, HCI_OP_LE_SET_SCAN_ENABLE, sizeof(cp), &cp);
+ }
+
+ /* Disable address resolution */
+ if (hci_dev_test_flag(hdev, HCI_LL_RPA_RESOLUTION) && !rpa_le_conn) {
+ __u8 enable = 0x00;
+
+ hci_req_add(req, HCI_OP_LE_SET_ADDR_RESOLV_ENABLE, 1, &enable);
+ }
+}
+
+static void del_from_accept_list(struct hci_request *req, bdaddr_t *bdaddr,
+ u8 bdaddr_type)
+{
+ struct hci_cp_le_del_from_accept_list cp;
+
+ cp.bdaddr_type = bdaddr_type;
+ bacpy(&cp.bdaddr, bdaddr);
+
+ bt_dev_dbg(req->hdev, "Remove %pMR (0x%x) from accept list", &cp.bdaddr,
+ cp.bdaddr_type);
+ hci_req_add(req, HCI_OP_LE_DEL_FROM_ACCEPT_LIST, sizeof(cp), &cp);
+
+ if (use_ll_privacy(req->hdev)) {
+ struct smp_irk *irk;
+
+ irk = hci_find_irk_by_addr(req->hdev, bdaddr, bdaddr_type);
+ if (irk) {
+ struct hci_cp_le_del_from_resolv_list cp;
+
+ cp.bdaddr_type = bdaddr_type;
+ bacpy(&cp.bdaddr, bdaddr);
+
+ hci_req_add(req, HCI_OP_LE_DEL_FROM_RESOLV_LIST,
+ sizeof(cp), &cp);
+ }
+ }
+}
+
+/* Adds connection to accept list if needed. On error, returns -1. */
+static int add_to_accept_list(struct hci_request *req,
+ struct hci_conn_params *params, u8 *num_entries,
+ bool allow_rpa)
+{
+ struct hci_cp_le_add_to_accept_list cp;
+ struct hci_dev *hdev = req->hdev;
+
+ /* Already in accept list */
+ if (hci_bdaddr_list_lookup(&hdev->le_accept_list, &params->addr,
+ params->addr_type))
+ return 0;
+
+ /* Select filter policy to accept all advertising */
+ if (*num_entries >= hdev->le_accept_list_size)
+ return -1;
+
+ /* Accept list can not be used with RPAs */
+ if (!allow_rpa &&
+ !hci_dev_test_flag(hdev, HCI_ENABLE_LL_PRIVACY) &&
+ hci_find_irk_by_addr(hdev, &params->addr, params->addr_type)) {
+ return -1;
+ }
+
+ /* During suspend, only wakeable devices can be in accept list */
+ if (hdev->suspended &&
+ !(params->flags & HCI_CONN_FLAG_REMOTE_WAKEUP))
+ return 0;
+
+ *num_entries += 1;
+ cp.bdaddr_type = params->addr_type;
+ bacpy(&cp.bdaddr, &params->addr);
+
+ bt_dev_dbg(hdev, "Add %pMR (0x%x) to accept list", &cp.bdaddr,
+ cp.bdaddr_type);
+ hci_req_add(req, HCI_OP_LE_ADD_TO_ACCEPT_LIST, sizeof(cp), &cp);
+
+ if (use_ll_privacy(hdev)) {
+ struct smp_irk *irk;
+
+ irk = hci_find_irk_by_addr(hdev, &params->addr,
+ params->addr_type);
+ if (irk) {
+ struct hci_cp_le_add_to_resolv_list cp;
+
+ cp.bdaddr_type = params->addr_type;
+ bacpy(&cp.bdaddr, &params->addr);
+ memcpy(cp.peer_irk, irk->val, 16);
+
+ if (hci_dev_test_flag(hdev, HCI_PRIVACY))
+ memcpy(cp.local_irk, hdev->irk, 16);
+ else
+ memset(cp.local_irk, 0, 16);
+
+ hci_req_add(req, HCI_OP_LE_ADD_TO_RESOLV_LIST,
+ sizeof(cp), &cp);
+ }
+ }
+
+ return 0;
+}
+
+static u8 update_accept_list(struct hci_request *req)
+{
+ struct hci_dev *hdev = req->hdev;
+ struct hci_conn_params *params;
+ struct bdaddr_list *b;
+ u8 num_entries = 0;
+ bool pend_conn, pend_report;
+ /* We allow usage of accept list even with RPAs in suspend. In the worst
+ * case, we won't be able to wake from devices that use the privacy1.2
+ * features. Additionally, once we support privacy1.2 and IRK
+ * offloading, we can update this to also check for those conditions.
+ */
+ bool allow_rpa = hdev->suspended;
+
+ if (use_ll_privacy(hdev))
+ allow_rpa = true;
+
+ /* Go through the current accept list programmed into the
+ * controller one by one and check if that address is still
+ * in the list of pending connections or list of devices to
+ * report. If not present in either list, then queue the
+ * command to remove it from the controller.
+ */
+ list_for_each_entry(b, &hdev->le_accept_list, list) {
+ pend_conn = hci_pend_le_action_lookup(&hdev->pend_le_conns,
+ &b->bdaddr,
+ b->bdaddr_type);
+ pend_report = hci_pend_le_action_lookup(&hdev->pend_le_reports,
+ &b->bdaddr,
+ b->bdaddr_type);
+
+ /* If the device is not likely to connect or report,
+ * remove it from the accept list.
+ */
+ if (!pend_conn && !pend_report) {
+ del_from_accept_list(req, &b->bdaddr, b->bdaddr_type);
+ continue;
+ }
+
+ /* Accept list can not be used with RPAs */
+ if (!allow_rpa &&
+ !hci_dev_test_flag(hdev, HCI_ENABLE_LL_PRIVACY) &&
+ hci_find_irk_by_addr(hdev, &b->bdaddr, b->bdaddr_type)) {
+ return 0x00;
+ }
+
+ num_entries++;
+ }
+
+ /* Since all no longer valid accept list entries have been
+ * removed, walk through the list of pending connections
+ * and ensure that any new device gets programmed into
+ * the controller.
+ *
+ * If the list of the devices is larger than the list of
+ * available accept list entries in the controller, then
+ * just abort and return filer policy value to not use the
+ * accept list.
+ */
+ list_for_each_entry(params, &hdev->pend_le_conns, action) {
+ if (add_to_accept_list(req, params, &num_entries, allow_rpa))
+ return 0x00;
+ }
+
+ /* After adding all new pending connections, walk through
+ * the list of pending reports and also add these to the
+ * accept list if there is still space. Abort if space runs out.
+ */
+ list_for_each_entry(params, &hdev->pend_le_reports, action) {
+ if (add_to_accept_list(req, params, &num_entries, allow_rpa))
+ return 0x00;
+ }
+
+ /* Use the allowlist unless the following conditions are all true:
+ * - We are not currently suspending
+ * - There are 1 or more ADV monitors registered and it's not offloaded
+ * - Interleaved scanning is not currently using the allowlist
+ */
+ if (!idr_is_empty(&hdev->adv_monitors_idr) && !hdev->suspended &&
+ hci_get_adv_monitor_offload_ext(hdev) == HCI_ADV_MONITOR_EXT_NONE &&
+ hdev->interleave_scan_state != INTERLEAVE_SCAN_ALLOWLIST)
+ return 0x00;
+
+ /* Select filter policy to use accept list */
+ return 0x01;
+}
+
+static bool scan_use_rpa(struct hci_dev *hdev)
+{
+ return hci_dev_test_flag(hdev, HCI_PRIVACY);
+}
+
+static void hci_req_start_scan(struct hci_request *req, u8 type, u16 interval,
+ u16 window, u8 own_addr_type, u8 filter_policy,
+ bool filter_dup, bool addr_resolv)
+{
+ struct hci_dev *hdev = req->hdev;
+
+ if (hdev->scanning_paused) {
+ bt_dev_dbg(hdev, "Scanning is paused for suspend");
+ return;
+ }
+
+ if (use_ll_privacy(hdev) && addr_resolv) {
+ u8 enable = 0x01;
+
+ hci_req_add(req, HCI_OP_LE_SET_ADDR_RESOLV_ENABLE, 1, &enable);
+ }
+
+ /* Use ext scanning if set ext scan param and ext scan enable is
+ * supported
+ */
+ if (use_ext_scan(hdev)) {
+ struct hci_cp_le_set_ext_scan_params *ext_param_cp;
+ struct hci_cp_le_set_ext_scan_enable ext_enable_cp;
+ struct hci_cp_le_scan_phy_params *phy_params;
+ u8 data[sizeof(*ext_param_cp) + sizeof(*phy_params) * 2];
+ u32 plen;
+
+ ext_param_cp = (void *)data;
+ phy_params = (void *)ext_param_cp->data;
+
+ memset(ext_param_cp, 0, sizeof(*ext_param_cp));
+ ext_param_cp->own_addr_type = own_addr_type;
+ ext_param_cp->filter_policy = filter_policy;
+
+ plen = sizeof(*ext_param_cp);
+
+ if (scan_1m(hdev) || scan_2m(hdev)) {
+ ext_param_cp->scanning_phys |= LE_SCAN_PHY_1M;
+
+ memset(phy_params, 0, sizeof(*phy_params));
+ phy_params->type = type;
+ phy_params->interval = cpu_to_le16(interval);
+ phy_params->window = cpu_to_le16(window);
+
+ plen += sizeof(*phy_params);
+ phy_params++;
+ }
+
+ if (scan_coded(hdev)) {
+ ext_param_cp->scanning_phys |= LE_SCAN_PHY_CODED;
+
+ memset(phy_params, 0, sizeof(*phy_params));
+ phy_params->type = type;
+ phy_params->interval = cpu_to_le16(interval);
+ phy_params->window = cpu_to_le16(window);
+
+ plen += sizeof(*phy_params);
+ phy_params++;
+ }
+
+ hci_req_add(req, HCI_OP_LE_SET_EXT_SCAN_PARAMS,
+ plen, ext_param_cp);
+
+ memset(&ext_enable_cp, 0, sizeof(ext_enable_cp));
+ ext_enable_cp.enable = LE_SCAN_ENABLE;
+ ext_enable_cp.filter_dup = filter_dup;
+
+ hci_req_add(req, HCI_OP_LE_SET_EXT_SCAN_ENABLE,
+ sizeof(ext_enable_cp), &ext_enable_cp);
+ } else {
+ struct hci_cp_le_set_scan_param param_cp;
+ struct hci_cp_le_set_scan_enable enable_cp;
+
+ memset(&param_cp, 0, sizeof(param_cp));
+ param_cp.type = type;
+ param_cp.interval = cpu_to_le16(interval);
+ param_cp.window = cpu_to_le16(window);
+ param_cp.own_address_type = own_addr_type;
+ param_cp.filter_policy = filter_policy;
+ hci_req_add(req, HCI_OP_LE_SET_SCAN_PARAM, sizeof(param_cp),
+ &param_cp);
+
+ memset(&enable_cp, 0, sizeof(enable_cp));
+ enable_cp.enable = LE_SCAN_ENABLE;
+ enable_cp.filter_dup = filter_dup;
+ hci_req_add(req, HCI_OP_LE_SET_SCAN_ENABLE, sizeof(enable_cp),
+ &enable_cp);
+ }
+}
+
+static void set_random_addr(struct hci_request *req, bdaddr_t *rpa);
+static int hci_update_random_address(struct hci_request *req,
+ bool require_privacy, bool use_rpa,
+ u8 *own_addr_type)
+{
+ struct hci_dev *hdev = req->hdev;
+ int err;
+
+ /* If privacy is enabled use a resolvable private address. If
+ * current RPA has expired or there is something else than
+ * the current RPA in use, then generate a new one.
+ */
+ if (use_rpa) {
+ /* If Controller supports LL Privacy use own address type is
+ * 0x03
+ */
+ if (use_ll_privacy(hdev))
+ *own_addr_type = ADDR_LE_DEV_RANDOM_RESOLVED;
+ else
+ *own_addr_type = ADDR_LE_DEV_RANDOM;
+
+ if (rpa_valid(hdev))
+ return 0;
+
+ err = smp_generate_rpa(hdev, hdev->irk, &hdev->rpa);
+ if (err < 0) {
+ bt_dev_err(hdev, "failed to generate new RPA");
+ return err;
+ }
+
+ set_random_addr(req, &hdev->rpa);
+
+ return 0;
+ }
+
+ /* In case of required privacy without resolvable private address,
+ * use an non-resolvable private address. This is useful for active
+ * scanning and non-connectable advertising.
+ */
+ if (require_privacy) {
+ bdaddr_t nrpa;
+
+ while (true) {
+ /* The non-resolvable private address is generated
+ * from random six bytes with the two most significant
+ * bits cleared.
+ */
+ get_random_bytes(&nrpa, 6);
+ nrpa.b[5] &= 0x3f;
+
+ /* The non-resolvable private address shall not be
+ * equal to the public address.
+ */
+ if (bacmp(&hdev->bdaddr, &nrpa))
+ break;
+ }
+
+ *own_addr_type = ADDR_LE_DEV_RANDOM;
+ set_random_addr(req, &nrpa);
+ return 0;
+ }
+
+ /* If forcing static address is in use or there is no public
+ * address use the static address as random address (but skip
+ * the HCI command if the current random address is already the
+ * static one.
+ *
+ * In case BR/EDR has been disabled on a dual-mode controller
+ * and a static address has been configured, then use that
+ * address instead of the public BR/EDR address.
+ */
+ if (hci_dev_test_flag(hdev, HCI_FORCE_STATIC_ADDR) ||
+ !bacmp(&hdev->bdaddr, BDADDR_ANY) ||
+ (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED) &&
+ bacmp(&hdev->static_addr, BDADDR_ANY))) {
+ *own_addr_type = ADDR_LE_DEV_RANDOM;
+ if (bacmp(&hdev->static_addr, &hdev->random_addr))
+ hci_req_add(req, HCI_OP_LE_SET_RANDOM_ADDR, 6,
+ &hdev->static_addr);
+ return 0;
+ }
+
+ /* Neither privacy nor static address is being used so use a
+ * public address.
+ */
+ *own_addr_type = ADDR_LE_DEV_PUBLIC;
+
+ return 0;
+}
+
+/* Ensure to call hci_req_add_le_scan_disable() first to disable the
+ * controller based address resolution to be able to reconfigure
+ * resolving list.
+ */
+void hci_req_add_le_passive_scan(struct hci_request *req)
+{
+ struct hci_dev *hdev = req->hdev;
+ u8 own_addr_type;
+ u8 filter_policy;
+ u16 window, interval;
+ /* Default is to enable duplicates filter */
+ u8 filter_dup = LE_SCAN_FILTER_DUP_ENABLE;
+ /* Background scanning should run with address resolution */
+ bool addr_resolv = true;
+
+ if (hdev->scanning_paused) {
+ bt_dev_dbg(hdev, "Scanning is paused for suspend");
+ return;
+ }
+
+ /* Set require_privacy to false since no SCAN_REQ are send
+ * during passive scanning. Not using an non-resolvable address
+ * here is important so that peer devices using direct
+ * advertising with our address will be correctly reported
+ * by the controller.
+ */
+ if (hci_update_random_address(req, false, scan_use_rpa(hdev),
+ &own_addr_type))
+ return;
+
+ if (hdev->enable_advmon_interleave_scan &&
+ __hci_update_interleaved_scan(hdev))
+ return;
+
+ bt_dev_dbg(hdev, "interleave state %d", hdev->interleave_scan_state);
+ /* Adding or removing entries from the accept list must
+ * happen before enabling scanning. The controller does
+ * not allow accept list modification while scanning.
+ */
+ filter_policy = update_accept_list(req);
+
+ /* When the controller is using random resolvable addresses and
+ * with that having LE privacy enabled, then controllers with
+ * Extended Scanner Filter Policies support can now enable support
+ * for handling directed advertising.
+ *
+ * So instead of using filter polices 0x00 (no accept list)
+ * and 0x01 (accept list enabled) use the new filter policies
+ * 0x02 (no accept list) and 0x03 (accept list enabled).
+ */
+ if (hci_dev_test_flag(hdev, HCI_PRIVACY) &&
+ (hdev->le_features[0] & HCI_LE_EXT_SCAN_POLICY))
+ filter_policy |= 0x02;
+
+ if (hdev->suspended) {
+ window = hdev->le_scan_window_suspend;
+ interval = hdev->le_scan_int_suspend;
+ } else if (hci_is_le_conn_scanning(hdev)) {
+ window = hdev->le_scan_window_connect;
+ interval = hdev->le_scan_int_connect;
+ } else if (hci_is_adv_monitoring(hdev)) {
+ window = hdev->le_scan_window_adv_monitor;
+ interval = hdev->le_scan_int_adv_monitor;
+
+ /* Disable duplicates filter when scanning for advertisement
+ * monitor for the following reasons.
+ *
+ * For HW pattern filtering (ex. MSFT), Realtek and Qualcomm
+ * controllers ignore RSSI_Sampling_Period when the duplicates
+ * filter is enabled.
+ *
+ * For SW pattern filtering, when we're not doing interleaved
+ * scanning, it is necessary to disable duplicates filter,
+ * otherwise hosts can only receive one advertisement and it's
+ * impossible to know if a peer is still in range.
+ */
+ filter_dup = LE_SCAN_FILTER_DUP_DISABLE;
+ } else {
+ window = hdev->le_scan_window;
+ interval = hdev->le_scan_interval;
+ }
+
+ bt_dev_dbg(hdev, "LE passive scan with accept list = %d",
+ filter_policy);
+ hci_req_start_scan(req, LE_SCAN_PASSIVE, interval, window,
+ own_addr_type, filter_policy, filter_dup,
+ addr_resolv);
+}
+
+static int hci_req_add_le_interleaved_scan(struct hci_request *req,
+ unsigned long opt)
+{
+ struct hci_dev *hdev = req->hdev;
+ int ret = 0;
+
+ hci_dev_lock(hdev);
+
+ if (hci_dev_test_flag(hdev, HCI_LE_SCAN))
+ hci_req_add_le_scan_disable(req, false);
+ hci_req_add_le_passive_scan(req);
+
+ switch (hdev->interleave_scan_state) {
+ case INTERLEAVE_SCAN_ALLOWLIST:
+ bt_dev_dbg(hdev, "next state: allowlist");
+ hdev->interleave_scan_state = INTERLEAVE_SCAN_NO_FILTER;
+ break;
+ case INTERLEAVE_SCAN_NO_FILTER:
+ bt_dev_dbg(hdev, "next state: no filter");
+ hdev->interleave_scan_state = INTERLEAVE_SCAN_ALLOWLIST;
+ break;
+ case INTERLEAVE_SCAN_NONE:
+ BT_ERR("unexpected error");
+ ret = -1;
+ }
+
+ hci_dev_unlock(hdev);
+
+ return ret;
+}
+
+static void interleave_scan_work(struct work_struct *work)
+{
+ struct hci_dev *hdev = container_of(work, struct hci_dev,
+ interleave_scan.work);
+ u8 status;
+ unsigned long timeout;
+
+ if (hdev->interleave_scan_state == INTERLEAVE_SCAN_ALLOWLIST) {
+ timeout = msecs_to_jiffies(hdev->advmon_allowlist_duration);
+ } else if (hdev->interleave_scan_state == INTERLEAVE_SCAN_NO_FILTER) {
+ timeout = msecs_to_jiffies(hdev->advmon_no_filter_duration);
+ } else {
+ bt_dev_err(hdev, "unexpected error");
+ return;
+ }
+
+ hci_req_sync(hdev, hci_req_add_le_interleaved_scan, 0,
+ HCI_CMD_TIMEOUT, &status);
+
+ /* Don't continue interleaving if it was canceled */
+ if (is_interleave_scanning(hdev))
+ queue_delayed_work(hdev->req_workqueue,
+ &hdev->interleave_scan, timeout);
+}
+
+static void set_random_addr(struct hci_request *req, bdaddr_t *rpa)
+{
+ struct hci_dev *hdev = req->hdev;
+
+ /* If we're advertising or initiating an LE connection we can't
+ * go ahead and change the random address at this time. This is
+ * because the eventual initiator address used for the
+ * subsequently created connection will be undefined (some
+ * controllers use the new address and others the one we had
+ * when the operation started).
+ *
+ * In this kind of scenario skip the update and let the random
+ * address be updated at the next cycle.
+ */
+ if (hci_dev_test_flag(hdev, HCI_LE_ADV) ||
+ hci_lookup_le_connect(hdev)) {
+ bt_dev_dbg(hdev, "Deferring random address update");
+ hci_dev_set_flag(hdev, HCI_RPA_EXPIRED);
+ return;
+ }
+
+ hci_req_add(req, HCI_OP_LE_SET_RANDOM_ADDR, 6, rpa);
+}
+
+void hci_request_setup(struct hci_dev *hdev)
+{
+ INIT_DELAYED_WORK(&hdev->interleave_scan, interleave_scan_work);
+}
+
+void hci_request_cancel_all(struct hci_dev *hdev)
+{
+ __hci_cmd_sync_cancel(hdev, ENODEV);
+
+ cancel_interleave_scan(hdev);
+}
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-18 14:54:19 +0000