1 files changed, 8 insertions, 50 deletions

diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index 5622ddd3bf..b24d746166 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -773,16 +773,16 @@ void __inet_accept(struct socket *sock, struct socket *newsock, struct sock *new
  *	Accept a pending connection. The TCP layer now gives BSD semantics.
  */
 
-int inet_accept(struct socket *sock, struct socket *newsock, int flags,
-		bool kern)
+int inet_accept(struct socket *sock, struct socket *newsock,
+		struct proto_accept_arg *arg)
 {
 	struct sock *sk1 = sock->sk, *sk2;
-	int err = -EINVAL;
 
 	/* IPV6_ADDRFORM can change sk->sk_prot under us. */
-	sk2 = READ_ONCE(sk1->sk_prot)->accept(sk1, flags, &err, kern);
+	arg->err = -EINVAL;
+	sk2 = READ_ONCE(sk1->sk_prot)->accept(sk1, arg);
 	if (!sk2)
-		return err;
+		return arg->err;
 
 	lock_sock(sk2);
 	__inet_accept(sock, newsock, sk2);
@@ -1074,6 +1074,7 @@ const struct proto_ops inet_stream_ops = {
 #endif
 	.splice_eof	   = inet_splice_eof,
 	.splice_read	   = tcp_splice_read,
+	.set_peek_off      = sk_set_peek_off,
 	.read_sock	   = tcp_read_sock,
 	.read_skb	   = tcp_read_skb,
 	.sendmsg_locked    = tcp_sendmsg_locked,
@@ -1483,7 +1484,6 @@ struct sk_buff *inet_gro_receive(struct list_head *head, struct sk_buff *skb)
 	struct sk_buff *p;
 	unsigned int hlen;
 	unsigned int off;
-	unsigned int id;
 	int flush = 1;
 	int proto;
 
@@ -1509,13 +1509,10 @@ struct sk_buff *inet_gro_receive(struct list_head *head, struct sk_buff *skb)
 		goto out;
 
 	NAPI_GRO_CB(skb)->proto = proto;
-	id = ntohl(*(__be32 *)&iph->id);
-	flush = (u16)((ntohl(*(__be32 *)iph) ^ skb_gro_len(skb)) | (id & ~IP_DF));
-	id >>= 16;
+	flush = (u16)((ntohl(*(__be32 *)iph) ^ skb_gro_len(skb)) | (ntohl(*(__be32 *)&iph->id) & ~IP_DF));
 
 	list_for_each_entry(p, head, list) {
 		struct iphdr *iph2;
-		u16 flush_id;
 
 		if (!NAPI_GRO_CB(p)->same_flow)
 			continue;
@@ -1532,49 +1529,10 @@ struct sk_buff *inet_gro_receive(struct list_head *head, struct sk_buff *skb)
 			NAPI_GRO_CB(p)->same_flow = 0;
 			continue;
 		}
-
-		/* All fields must match except length and checksum. */
-		NAPI_GRO_CB(p)->flush |=
-			(iph->ttl ^ iph2->ttl) |
-			(iph->tos ^ iph2->tos) |
-			((iph->frag_off ^ iph2->frag_off) & htons(IP_DF));
-
-		NAPI_GRO_CB(p)->flush |= flush;
-
-		/* We need to store of the IP ID check to be included later
-		 * when we can verify that this packet does in fact belong
-		 * to a given flow.
-		 */
-		flush_id = (u16)(id - ntohs(iph2->id));
-
-		/* This bit of code makes it much easier for us to identify
-		 * the cases where we are doing atomic vs non-atomic IP ID
-		 * checks.  Specifically an atomic check can return IP ID
-		 * values 0 - 0xFFFF, while a non-atomic check can only
-		 * return 0 or 0xFFFF.
-		 */
-		if (!NAPI_GRO_CB(p)->is_atomic ||
-		    !(iph->frag_off & htons(IP_DF))) {
-			flush_id ^= NAPI_GRO_CB(p)->count;
-			flush_id = flush_id ? 0xFFFF : 0;
-		}
-
-		/* If the previous IP ID value was based on an atomic
-		 * datagram we can overwrite the value and ignore it.
-		 */
-		if (NAPI_GRO_CB(skb)->is_atomic)
-			NAPI_GRO_CB(p)->flush_id = flush_id;
-		else
-			NAPI_GRO_CB(p)->flush_id |= flush_id;
 	}
 
-	NAPI_GRO_CB(skb)->is_atomic = !!(iph->frag_off & htons(IP_DF));
 	NAPI_GRO_CB(skb)->flush |= flush;
-	skb_set_network_header(skb, off);
-	/* The above will be needed by the transport layer if there is one
-	 * immediately following this IP hdr.
-	 */
-	NAPI_GRO_CB(skb)->inner_network_offset = off;
+	NAPI_GRO_CB(skb)->network_offsets[NAPI_GRO_CB(skb)->encap_mark] = off;
 
 	/* Note : No need to call skb_gro_postpull_rcsum() here,
 	 * as we already checked checksum over ipv4 header was 0