1 files changed, 91 insertions, 3 deletions

diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c
index 9f3dc13a3b..e19f2fa1a5 100644
--- a/sound/pci/hda/tas2781_hda_i2c.c
+++ b/sound/pci/hda/tas2781_hda_i2c.c
@@ -65,6 +65,24 @@ enum calib_data {
 	CALIB_MAX
 };
 
+#define TAS2563_MAX_CHANNELS	4
+
+#define TAS2563_CAL_POWER	TASDEVICE_REG(0, 0x0d, 0x3c)
+#define TAS2563_CAL_R0		TASDEVICE_REG(0, 0x0f, 0x34)
+#define TAS2563_CAL_INVR0	TASDEVICE_REG(0, 0x0f, 0x40)
+#define TAS2563_CAL_R0_LOW	TASDEVICE_REG(0, 0x0f, 0x48)
+#define TAS2563_CAL_TLIM	TASDEVICE_REG(0, 0x10, 0x14)
+#define TAS2563_CAL_N		5
+#define TAS2563_CAL_DATA_SIZE	4
+#define TAS2563_CAL_CH_SIZE	20
+#define TAS2563_CAL_ARRAY_SIZE	80
+
+static unsigned int cal_regs[TAS2563_CAL_N] = {
+	TAS2563_CAL_POWER, TAS2563_CAL_R0, TAS2563_CAL_INVR0,
+	TAS2563_CAL_R0_LOW, TAS2563_CAL_TLIM,
+};
+
+
 struct tas2781_hda {
 	struct device *dev;
 	struct tasdevice_priv *priv;
@@ -81,7 +99,7 @@ static int tas2781_get_i2c_res(struct acpi_resource *ares, void *data)
 
 	if (i2c_acpi_get_i2c_resource(ares, &sb)) {
 		if (tas_priv->ndev < TASDEVICE_MAX_CHANNELS &&
-			sb->slave_address != TAS2781_GLOBAL_ADDR) {
+			sb->slave_address != tas_priv->global_addr) {
 			tas_priv->tasdevice[tas_priv->ndev].dev_addr =
 				(unsigned int)sb->slave_address;
 			tas_priv->ndev++;
@@ -417,13 +435,76 @@ static const struct snd_kcontrol_new tas2781_dsp_conf_ctrl = {
 	.put = tasdevice_config_put,
 };
 
+static void tas2563_apply_calib(struct tasdevice_priv *tas_priv)
+{
+	int offset = 0;
+	__be32 data;
+	int ret;
+
+	for (int i = 0; i < tas_priv->ndev; i++) {
+		for (int j = 0; j < TAS2563_CAL_N; ++j) {
+			data = cpu_to_be32(
+				*(uint32_t *)&tas_priv->cali_data.data[offset]);
+			ret = tasdevice_dev_bulk_write(tas_priv, i, cal_regs[j],
+				(unsigned char *)&data, TAS2563_CAL_DATA_SIZE);
+			if (ret)
+				dev_err(tas_priv->dev,
+					"Error writing calib regs\n");
+			offset += TAS2563_CAL_DATA_SIZE;
+		}
+	}
+}
+
+static int tas2563_save_calibration(struct tasdevice_priv *tas_priv)
+{
+	static efi_guid_t efi_guid = EFI_GUID(0x1f52d2a1, 0xbb3a, 0x457d, 0xbc,
+		0x09, 0x43, 0xa3, 0xf4, 0x31, 0x0a, 0x92);
+
+	static efi_char16_t *efi_vars[TAS2563_MAX_CHANNELS][TAS2563_CAL_N] = {
+		{ L"Power_1", L"R0_1", L"InvR0_1", L"R0_Low_1", L"TLim_1" },
+		{ L"Power_2", L"R0_2", L"InvR0_2", L"R0_Low_2", L"TLim_2" },
+		{ L"Power_3", L"R0_3", L"InvR0_3", L"R0_Low_3", L"TLim_3" },
+		{ L"Power_4", L"R0_4", L"InvR0_4", L"R0_Low_4", L"TLim_4" },
+	};
+
+	unsigned long max_size = TAS2563_CAL_DATA_SIZE;
+	unsigned int offset = 0;
+	efi_status_t status;
+	unsigned int attr;
+
+	tas_priv->cali_data.data = devm_kzalloc(tas_priv->dev,
+			TAS2563_CAL_ARRAY_SIZE, GFP_KERNEL);
+	if (!tas_priv->cali_data.data)
+		return -ENOMEM;
+
+	for (int i = 0; i < tas_priv->ndev; ++i) {
+		for (int j = 0; j < TAS2563_CAL_N; ++j) {
+			status = efi.get_variable(efi_vars[i][j],
+				&efi_guid, &attr, &max_size,
+				&tas_priv->cali_data.data[offset]);
+			if (status != EFI_SUCCESS ||
+				max_size != TAS2563_CAL_DATA_SIZE) {
+				dev_warn(tas_priv->dev,
+				"Calibration data read failed %ld\n", status);
+				return -EINVAL;
+			}
+			offset += TAS2563_CAL_DATA_SIZE;
+		}
+	}
+
+	tas_priv->cali_data.total_sz = offset;
+	tasdevice_apply_calibration(tas_priv);
+
+	return 0;
+}
+
 static void tas2781_apply_calib(struct tasdevice_priv *tas_priv)
 {
 	static const unsigned char page_array[CALIB_MAX] = {
-		0x17, 0x18, 0x18, 0x0d, 0x18
+		0x17, 0x18, 0x18, 0x13, 0x18,
 	};
 	static const unsigned char rgno_array[CALIB_MAX] = {
-		0x74, 0x0c, 0x14, 0x3c, 0x7c
+		0x74, 0x0c, 0x14, 0x70, 0x7c,
 	};
 	unsigned char *data;
 	int i, j, rc;
@@ -715,6 +796,12 @@ static int tas2781_hda_i2c_probe(struct i2c_client *clt)
 		device_name = "TIAS2781";
 		tas_hda->priv->save_calibration = tas2781_save_calibration;
 		tas_hda->priv->apply_calibration = tas2781_apply_calib;
+		tas_hda->priv->global_addr = TAS2781_GLOBAL_ADDR;
+	} else if (strstr(dev_name(&clt->dev), "INT8866")) {
+		device_name = "INT8866";
+		tas_hda->priv->save_calibration = tas2563_save_calibration;
+		tas_hda->priv->apply_calibration = tas2563_apply_calib;
+		tas_hda->priv->global_addr = TAS2563_GLOBAL_ADDR;
 	} else
 		return -ENODEV;
 
@@ -860,6 +947,7 @@ static const struct i2c_device_id tas2781_hda_i2c_id[] = {
 
 static const struct acpi_device_id tas2781_acpi_hda_match[] = {
 	{"TIAS2781", 0 },
+	{"INT8866", 0 },
 	{}
 };
 MODULE_DEVICE_TABLE(acpi, tas2781_acpi_hda_match);