summaryrefslogtreecommitdiffstats
path: root/sound/soc/fsl/fsl_esai.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/fsl/fsl_esai.c')
-rw-r--r--sound/soc/fsl/fsl_esai.c1214
1 files changed, 1214 insertions, 0 deletions
diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
new file mode 100644
index 0000000000..d0d8a01da9
--- /dev/null
+++ b/sound/soc/fsl/fsl_esai.c
@@ -0,0 +1,1214 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Freescale ESAI ALSA SoC Digital Audio Interface (DAI) driver
+//
+// Copyright (C) 2014 Freescale Semiconductor, Inc.
+
+#include <linux/clk.h>
+#include <linux/dmaengine.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+#include <sound/dmaengine_pcm.h>
+#include <sound/pcm_params.h>
+
+#include "fsl_esai.h"
+#include "imx-pcm.h"
+
+#define FSL_ESAI_FORMATS (SNDRV_PCM_FMTBIT_S8 | \
+ SNDRV_PCM_FMTBIT_S16_LE | \
+ SNDRV_PCM_FMTBIT_S20_3LE | \
+ SNDRV_PCM_FMTBIT_S24_LE)
+
+/**
+ * struct fsl_esai_soc_data - soc specific data
+ * @reset_at_xrun: flags for enable reset operaton
+ */
+struct fsl_esai_soc_data {
+ bool reset_at_xrun;
+};
+
+/**
+ * struct fsl_esai - ESAI private data
+ * @dma_params_rx: DMA parameters for receive channel
+ * @dma_params_tx: DMA parameters for transmit channel
+ * @pdev: platform device pointer
+ * @regmap: regmap handler
+ * @coreclk: clock source to access register
+ * @extalclk: esai clock source to derive HCK, SCK and FS
+ * @fsysclk: system clock source to derive HCK, SCK and FS
+ * @spbaclk: SPBA clock (optional, depending on SoC design)
+ * @work: work to handle the reset operation
+ * @soc: soc specific data
+ * @lock: spin lock between hw_reset() and trigger()
+ * @fifo_depth: depth of tx/rx FIFO
+ * @slot_width: width of each DAI slot
+ * @slots: number of slots
+ * @tx_mask: slot mask for TX
+ * @rx_mask: slot mask for RX
+ * @channels: channel num for tx or rx
+ * @hck_rate: clock rate of desired HCKx clock
+ * @sck_rate: clock rate of desired SCKx clock
+ * @hck_dir: the direction of HCKx pads
+ * @sck_div: if using PSR/PM dividers for SCKx clock
+ * @consumer_mode: if fully using DAI clock consumer mode
+ * @synchronous: if using tx/rx synchronous mode
+ * @name: driver name
+ */
+struct fsl_esai {
+ struct snd_dmaengine_dai_dma_data dma_params_rx;
+ struct snd_dmaengine_dai_dma_data dma_params_tx;
+ struct platform_device *pdev;
+ struct regmap *regmap;
+ struct clk *coreclk;
+ struct clk *extalclk;
+ struct clk *fsysclk;
+ struct clk *spbaclk;
+ struct work_struct work;
+ const struct fsl_esai_soc_data *soc;
+ spinlock_t lock; /* Protect hw_reset and trigger */
+ u32 fifo_depth;
+ u32 slot_width;
+ u32 slots;
+ u32 tx_mask;
+ u32 rx_mask;
+ u32 channels[2];
+ u32 hck_rate[2];
+ u32 sck_rate[2];
+ bool hck_dir[2];
+ bool sck_div[2];
+ bool consumer_mode;
+ bool synchronous;
+ char name[32];
+};
+
+static struct fsl_esai_soc_data fsl_esai_vf610 = {
+ .reset_at_xrun = true,
+};
+
+static struct fsl_esai_soc_data fsl_esai_imx35 = {
+ .reset_at_xrun = true,
+};
+
+static struct fsl_esai_soc_data fsl_esai_imx6ull = {
+ .reset_at_xrun = false,
+};
+
+static irqreturn_t esai_isr(int irq, void *devid)
+{
+ struct fsl_esai *esai_priv = (struct fsl_esai *)devid;
+ struct platform_device *pdev = esai_priv->pdev;
+ u32 esr;
+ u32 saisr;
+
+ regmap_read(esai_priv->regmap, REG_ESAI_ESR, &esr);
+ regmap_read(esai_priv->regmap, REG_ESAI_SAISR, &saisr);
+
+ if ((saisr & (ESAI_SAISR_TUE | ESAI_SAISR_ROE)) &&
+ esai_priv->soc->reset_at_xrun) {
+ dev_dbg(&pdev->dev, "reset module for xrun\n");
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_TCR,
+ ESAI_xCR_xEIE_MASK, 0);
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_RCR,
+ ESAI_xCR_xEIE_MASK, 0);
+ schedule_work(&esai_priv->work);
+ }
+
+ if (esr & ESAI_ESR_TINIT_MASK)
+ dev_dbg(&pdev->dev, "isr: Transmission Initialized\n");
+
+ if (esr & ESAI_ESR_RFF_MASK)
+ dev_warn(&pdev->dev, "isr: Receiving overrun\n");
+
+ if (esr & ESAI_ESR_TFE_MASK)
+ dev_warn(&pdev->dev, "isr: Transmission underrun\n");
+
+ if (esr & ESAI_ESR_TLS_MASK)
+ dev_dbg(&pdev->dev, "isr: Just transmitted the last slot\n");
+
+ if (esr & ESAI_ESR_TDE_MASK)
+ dev_dbg(&pdev->dev, "isr: Transmission data exception\n");
+
+ if (esr & ESAI_ESR_TED_MASK)
+ dev_dbg(&pdev->dev, "isr: Transmitting even slots\n");
+
+ if (esr & ESAI_ESR_TD_MASK)
+ dev_dbg(&pdev->dev, "isr: Transmitting data\n");
+
+ if (esr & ESAI_ESR_RLS_MASK)
+ dev_dbg(&pdev->dev, "isr: Just received the last slot\n");
+
+ if (esr & ESAI_ESR_RDE_MASK)
+ dev_dbg(&pdev->dev, "isr: Receiving data exception\n");
+
+ if (esr & ESAI_ESR_RED_MASK)
+ dev_dbg(&pdev->dev, "isr: Receiving even slots\n");
+
+ if (esr & ESAI_ESR_RD_MASK)
+ dev_dbg(&pdev->dev, "isr: Receiving data\n");
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * fsl_esai_divisor_cal - This function is used to calculate the
+ * divisors of psr, pm, fp and it is supposed to be called in
+ * set_dai_sysclk() and set_bclk().
+ *
+ * @dai: pointer to DAI
+ * @tx: current setting is for playback or capture
+ * @ratio: desired overall ratio for the paticipating dividers
+ * @usefp: for HCK setting, there is no need to set fp divider
+ * @fp: bypass other dividers by setting fp directly if fp != 0
+ */
+static int fsl_esai_divisor_cal(struct snd_soc_dai *dai, bool tx, u32 ratio,
+ bool usefp, u32 fp)
+{
+ struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai);
+ u32 psr, pm = 999, maxfp, prod, sub, savesub, i, j;
+
+ maxfp = usefp ? 16 : 1;
+
+ if (usefp && fp)
+ goto out_fp;
+
+ if (ratio > 2 * 8 * 256 * maxfp || ratio < 2) {
+ dev_err(dai->dev, "the ratio is out of range (2 ~ %d)\n",
+ 2 * 8 * 256 * maxfp);
+ return -EINVAL;
+ } else if (ratio % 2) {
+ dev_err(dai->dev, "the raio must be even if using upper divider\n");
+ return -EINVAL;
+ }
+
+ ratio /= 2;
+
+ psr = ratio <= 256 * maxfp ? ESAI_xCCR_xPSR_BYPASS : ESAI_xCCR_xPSR_DIV8;
+
+ /* Do not loop-search if PM (1 ~ 256) alone can serve the ratio */
+ if (ratio <= 256) {
+ pm = ratio;
+ fp = 1;
+ goto out;
+ }
+
+ /* Set the max fluctuation -- 0.1% of the max devisor */
+ savesub = (psr ? 1 : 8) * 256 * maxfp / 1000;
+
+ /* Find the best value for PM */
+ for (i = 1; i <= 256; i++) {
+ for (j = 1; j <= maxfp; j++) {
+ /* PSR (1 or 8) * PM (1 ~ 256) * FP (1 ~ 16) */
+ prod = (psr ? 1 : 8) * i * j;
+
+ if (prod == ratio)
+ sub = 0;
+ else if (prod / ratio == 1)
+ sub = prod - ratio;
+ else if (ratio / prod == 1)
+ sub = ratio - prod;
+ else
+ continue;
+
+ /* Calculate the fraction */
+ sub = sub * 1000 / ratio;
+ if (sub < savesub) {
+ savesub = sub;
+ pm = i;
+ fp = j;
+ }
+
+ /* We are lucky */
+ if (savesub == 0)
+ goto out;
+ }
+ }
+
+ if (pm == 999) {
+ dev_err(dai->dev, "failed to calculate proper divisors\n");
+ return -EINVAL;
+ }
+
+out:
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_xCCR(tx),
+ ESAI_xCCR_xPSR_MASK | ESAI_xCCR_xPM_MASK,
+ psr | ESAI_xCCR_xPM(pm));
+
+out_fp:
+ /* Bypass fp if not being required */
+ if (maxfp <= 1)
+ return 0;
+
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_xCCR(tx),
+ ESAI_xCCR_xFP_MASK, ESAI_xCCR_xFP(fp));
+
+ return 0;
+}
+
+/**
+ * fsl_esai_set_dai_sysclk - configure the clock frequency of MCLK (HCKT/HCKR)
+ * @dai: pointer to DAI
+ * @clk_id: The clock source of HCKT/HCKR
+ * (Input from outside; output from inside, FSYS or EXTAL)
+ * @freq: The required clock rate of HCKT/HCKR
+ * @dir: The clock direction of HCKT/HCKR
+ *
+ * Note: If the direction is input, we do not care about clk_id.
+ */
+static int fsl_esai_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id,
+ unsigned int freq, int dir)
+{
+ struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai);
+ struct clk *clksrc = esai_priv->extalclk;
+ bool tx = (clk_id <= ESAI_HCKT_EXTAL || esai_priv->synchronous);
+ bool in = dir == SND_SOC_CLOCK_IN;
+ u32 ratio, ecr = 0;
+ unsigned long clk_rate;
+ int ret;
+
+ if (freq == 0) {
+ dev_err(dai->dev, "%sput freq of HCK%c should not be 0Hz\n",
+ in ? "in" : "out", tx ? 'T' : 'R');
+ return -EINVAL;
+ }
+
+ /* Bypass divider settings if the requirement doesn't change */
+ if (freq == esai_priv->hck_rate[tx] && dir == esai_priv->hck_dir[tx])
+ return 0;
+
+ /* sck_div can be only bypassed if ETO/ERO=0 and SNC_SOC_CLOCK_OUT */
+ esai_priv->sck_div[tx] = true;
+
+ /* Set the direction of HCKT/HCKR pins */
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_xCCR(tx),
+ ESAI_xCCR_xHCKD, in ? 0 : ESAI_xCCR_xHCKD);
+
+ if (in)
+ goto out;
+
+ switch (clk_id) {
+ case ESAI_HCKT_FSYS:
+ case ESAI_HCKR_FSYS:
+ clksrc = esai_priv->fsysclk;
+ break;
+ case ESAI_HCKT_EXTAL:
+ ecr |= ESAI_ECR_ETI;
+ break;
+ case ESAI_HCKR_EXTAL:
+ ecr |= esai_priv->synchronous ? ESAI_ECR_ETI : ESAI_ECR_ERI;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (IS_ERR(clksrc)) {
+ dev_err(dai->dev, "no assigned %s clock\n",
+ (clk_id % 2) ? "extal" : "fsys");
+ return PTR_ERR(clksrc);
+ }
+ clk_rate = clk_get_rate(clksrc);
+
+ ratio = clk_rate / freq;
+ if (ratio * freq > clk_rate)
+ ret = ratio * freq - clk_rate;
+ else if (ratio * freq < clk_rate)
+ ret = clk_rate - ratio * freq;
+ else
+ ret = 0;
+
+ /* Block if clock source can not be divided into the required rate */
+ if (ret != 0 && clk_rate / ret < 1000) {
+ dev_err(dai->dev, "failed to derive required HCK%c rate\n",
+ tx ? 'T' : 'R');
+ return -EINVAL;
+ }
+
+ /* Only EXTAL source can be output directly without using PSR and PM */
+ if (ratio == 1 && clksrc == esai_priv->extalclk) {
+ /* Bypass all the dividers if not being needed */
+ ecr |= tx ? ESAI_ECR_ETO : ESAI_ECR_ERO;
+ goto out;
+ } else if (ratio < 2) {
+ /* The ratio should be no less than 2 if using other sources */
+ dev_err(dai->dev, "failed to derive required HCK%c rate\n",
+ tx ? 'T' : 'R');
+ return -EINVAL;
+ }
+
+ ret = fsl_esai_divisor_cal(dai, tx, ratio, false, 0);
+ if (ret)
+ return ret;
+
+ esai_priv->sck_div[tx] = false;
+
+out:
+ esai_priv->hck_dir[tx] = dir;
+ esai_priv->hck_rate[tx] = freq;
+
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_ECR,
+ tx ? ESAI_ECR_ETI | ESAI_ECR_ETO :
+ ESAI_ECR_ERI | ESAI_ECR_ERO, ecr);
+
+ return 0;
+}
+
+/**
+ * fsl_esai_set_bclk - configure the related dividers according to the bclk rate
+ * @dai: pointer to DAI
+ * @tx: direction boolean
+ * @freq: bclk freq
+ */
+static int fsl_esai_set_bclk(struct snd_soc_dai *dai, bool tx, u32 freq)
+{
+ struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai);
+ u32 hck_rate = esai_priv->hck_rate[tx];
+ u32 sub, ratio = hck_rate / freq;
+ int ret;
+
+ /* Don't apply for fully consumer mode or unchanged bclk */
+ if (esai_priv->consumer_mode || esai_priv->sck_rate[tx] == freq)
+ return 0;
+
+ if (ratio * freq > hck_rate)
+ sub = ratio * freq - hck_rate;
+ else if (ratio * freq < hck_rate)
+ sub = hck_rate - ratio * freq;
+ else
+ sub = 0;
+
+ /* Block if clock source can not be divided into the required rate */
+ if (sub != 0 && hck_rate / sub < 1000) {
+ dev_err(dai->dev, "failed to derive required SCK%c rate\n",
+ tx ? 'T' : 'R');
+ return -EINVAL;
+ }
+
+ /* The ratio should be contented by FP alone if bypassing PM and PSR */
+ if (!esai_priv->sck_div[tx] && (ratio > 16 || ratio == 0)) {
+ dev_err(dai->dev, "the ratio is out of range (1 ~ 16)\n");
+ return -EINVAL;
+ }
+
+ ret = fsl_esai_divisor_cal(dai, tx, ratio, true,
+ esai_priv->sck_div[tx] ? 0 : ratio);
+ if (ret)
+ return ret;
+
+ /* Save current bclk rate */
+ esai_priv->sck_rate[tx] = freq;
+
+ return 0;
+}
+
+static int fsl_esai_set_dai_tdm_slot(struct snd_soc_dai *dai, u32 tx_mask,
+ u32 rx_mask, int slots, int slot_width)
+{
+ struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai);
+
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_TCCR,
+ ESAI_xCCR_xDC_MASK, ESAI_xCCR_xDC(slots));
+
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_RCCR,
+ ESAI_xCCR_xDC_MASK, ESAI_xCCR_xDC(slots));
+
+ esai_priv->slot_width = slot_width;
+ esai_priv->slots = slots;
+ esai_priv->tx_mask = tx_mask;
+ esai_priv->rx_mask = rx_mask;
+
+ return 0;
+}
+
+static int fsl_esai_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+ struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai);
+ u32 xcr = 0, xccr = 0, mask;
+
+ /* DAI mode */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ /* Data on rising edge of bclk, frame low, 1clk before data */
+ xcr |= ESAI_xCR_xFSR;
+ xccr |= ESAI_xCCR_xFSP | ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP;
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ /* Data on rising edge of bclk, frame high */
+ xccr |= ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ /* Data on rising edge of bclk, frame high, right aligned */
+ xccr |= ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP;
+ xcr |= ESAI_xCR_xWA;
+ break;
+ case SND_SOC_DAIFMT_DSP_A:
+ /* Data on rising edge of bclk, frame high, 1clk before data */
+ xcr |= ESAI_xCR_xFSL | ESAI_xCR_xFSR;
+ xccr |= ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP;
+ break;
+ case SND_SOC_DAIFMT_DSP_B:
+ /* Data on rising edge of bclk, frame high */
+ xcr |= ESAI_xCR_xFSL;
+ xccr |= ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* DAI clock inversion */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ /* Nothing to do for both normal cases */
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ /* Invert bit clock */
+ xccr ^= ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ /* Invert frame clock */
+ xccr ^= ESAI_xCCR_xFSP;
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ /* Invert both clocks */
+ xccr ^= ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP | ESAI_xCCR_xFSP;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ esai_priv->consumer_mode = false;
+
+ /* DAI clock provider masks */
+ switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
+ case SND_SOC_DAIFMT_BC_FC:
+ esai_priv->consumer_mode = true;
+ break;
+ case SND_SOC_DAIFMT_BP_FC:
+ xccr |= ESAI_xCCR_xCKD;
+ break;
+ case SND_SOC_DAIFMT_BC_FP:
+ xccr |= ESAI_xCCR_xFSD;
+ break;
+ case SND_SOC_DAIFMT_BP_FP:
+ xccr |= ESAI_xCCR_xFSD | ESAI_xCCR_xCKD;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ mask = ESAI_xCR_xFSL | ESAI_xCR_xFSR | ESAI_xCR_xWA;
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_TCR, mask, xcr);
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_RCR, mask, xcr);
+
+ mask = ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP | ESAI_xCCR_xFSP |
+ ESAI_xCCR_xFSD | ESAI_xCCR_xCKD;
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_TCCR, mask, xccr);
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_RCCR, mask, xccr);
+
+ return 0;
+}
+
+static int fsl_esai_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai);
+
+ if (!snd_soc_dai_active(dai)) {
+ /* Set synchronous mode */
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_SAICR,
+ ESAI_SAICR_SYNC, esai_priv->synchronous ?
+ ESAI_SAICR_SYNC : 0);
+
+ /* Set slots count */
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_TCCR,
+ ESAI_xCCR_xDC_MASK,
+ ESAI_xCCR_xDC(esai_priv->slots));
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_RCCR,
+ ESAI_xCCR_xDC_MASK,
+ ESAI_xCCR_xDC(esai_priv->slots));
+ }
+
+ return 0;
+
+}
+
+static int fsl_esai_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai);
+ bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
+ u32 width = params_width(params);
+ u32 channels = params_channels(params);
+ u32 pins = DIV_ROUND_UP(channels, esai_priv->slots);
+ u32 slot_width = width;
+ u32 bclk, mask, val;
+ int ret;
+
+ /* Override slot_width if being specifically set */
+ if (esai_priv->slot_width)
+ slot_width = esai_priv->slot_width;
+
+ bclk = params_rate(params) * slot_width * esai_priv->slots;
+
+ ret = fsl_esai_set_bclk(dai, esai_priv->synchronous || tx, bclk);
+ if (ret)
+ return ret;
+
+ mask = ESAI_xCR_xSWS_MASK;
+ val = ESAI_xCR_xSWS(slot_width, width);
+
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx), mask, val);
+ /* Recording in synchronous mode needs to set TCR also */
+ if (!tx && esai_priv->synchronous)
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_TCR, mask, val);
+
+ /* Use Normal mode to support monaural audio */
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx),
+ ESAI_xCR_xMOD_MASK, params_channels(params) > 1 ?
+ ESAI_xCR_xMOD_NETWORK : 0);
+
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx),
+ ESAI_xFCR_xFR_MASK, ESAI_xFCR_xFR);
+
+ mask = ESAI_xFCR_xFR_MASK | ESAI_xFCR_xWA_MASK | ESAI_xFCR_xFWM_MASK |
+ (tx ? ESAI_xFCR_TE_MASK | ESAI_xFCR_TIEN : ESAI_xFCR_RE_MASK);
+ val = ESAI_xFCR_xWA(width) | ESAI_xFCR_xFWM(esai_priv->fifo_depth) |
+ (tx ? ESAI_xFCR_TE(pins) | ESAI_xFCR_TIEN : ESAI_xFCR_RE(pins));
+
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx), mask, val);
+
+ if (tx)
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_TCR,
+ ESAI_xCR_PADC, ESAI_xCR_PADC);
+
+ /* Remove ESAI personal reset by configuring ESAI_PCRC and ESAI_PRRC */
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_PRRC,
+ ESAI_PRRC_PDC_MASK, ESAI_PRRC_PDC(ESAI_GPIO));
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_PCRC,
+ ESAI_PCRC_PC_MASK, ESAI_PCRC_PC(ESAI_GPIO));
+ return 0;
+}
+
+static int fsl_esai_hw_init(struct fsl_esai *esai_priv)
+{
+ struct platform_device *pdev = esai_priv->pdev;
+ int ret;
+
+ /* Reset ESAI unit */
+ ret = regmap_update_bits(esai_priv->regmap, REG_ESAI_ECR,
+ ESAI_ECR_ESAIEN_MASK | ESAI_ECR_ERST_MASK,
+ ESAI_ECR_ESAIEN | ESAI_ECR_ERST);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to reset ESAI: %d\n", ret);
+ return ret;
+ }
+
+ /*
+ * We need to enable ESAI so as to access some of its registers.
+ * Otherwise, we would fail to dump regmap from user space.
+ */
+ ret = regmap_update_bits(esai_priv->regmap, REG_ESAI_ECR,
+ ESAI_ECR_ESAIEN_MASK | ESAI_ECR_ERST_MASK,
+ ESAI_ECR_ESAIEN);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable ESAI: %d\n", ret);
+ return ret;
+ }
+
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_PRRC,
+ ESAI_PRRC_PDC_MASK, 0);
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_PCRC,
+ ESAI_PCRC_PC_MASK, 0);
+
+ return 0;
+}
+
+static int fsl_esai_register_restore(struct fsl_esai *esai_priv)
+{
+ int ret;
+
+ /* FIFO reset for safety */
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_TFCR,
+ ESAI_xFCR_xFR, ESAI_xFCR_xFR);
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_RFCR,
+ ESAI_xFCR_xFR, ESAI_xFCR_xFR);
+
+ regcache_mark_dirty(esai_priv->regmap);
+ ret = regcache_sync(esai_priv->regmap);
+ if (ret)
+ return ret;
+
+ /* FIFO reset done */
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_TFCR, ESAI_xFCR_xFR, 0);
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_RFCR, ESAI_xFCR_xFR, 0);
+
+ return 0;
+}
+
+static void fsl_esai_trigger_start(struct fsl_esai *esai_priv, bool tx)
+{
+ u8 i, channels = esai_priv->channels[tx];
+ u32 pins = DIV_ROUND_UP(channels, esai_priv->slots);
+ u32 mask;
+
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx),
+ ESAI_xFCR_xFEN_MASK, ESAI_xFCR_xFEN);
+
+ /* Write initial words reqiured by ESAI as normal procedure */
+ for (i = 0; tx && i < channels; i++)
+ regmap_write(esai_priv->regmap, REG_ESAI_ETDR, 0x0);
+
+ /*
+ * When set the TE/RE in the end of enablement flow, there
+ * will be channel swap issue for multi data line case.
+ * In order to workaround this issue, we switch the bit
+ * enablement sequence to below sequence
+ * 1) clear the xSMB & xSMA: which is done in probe and
+ * stop state.
+ * 2) set TE/RE
+ * 3) set xSMB
+ * 4) set xSMA: xSMA is the last one in this flow, which
+ * will trigger esai to start.
+ */
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx),
+ tx ? ESAI_xCR_TE_MASK : ESAI_xCR_RE_MASK,
+ tx ? ESAI_xCR_TE(pins) : ESAI_xCR_RE(pins));
+ mask = tx ? esai_priv->tx_mask : esai_priv->rx_mask;
+
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMB(tx),
+ ESAI_xSMB_xS_MASK, ESAI_xSMB_xS(mask));
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMA(tx),
+ ESAI_xSMA_xS_MASK, ESAI_xSMA_xS(mask));
+
+ /* Enable Exception interrupt */
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx),
+ ESAI_xCR_xEIE_MASK, ESAI_xCR_xEIE);
+}
+
+static void fsl_esai_trigger_stop(struct fsl_esai *esai_priv, bool tx)
+{
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx),
+ ESAI_xCR_xEIE_MASK, 0);
+
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx),
+ tx ? ESAI_xCR_TE_MASK : ESAI_xCR_RE_MASK, 0);
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMA(tx),
+ ESAI_xSMA_xS_MASK, 0);
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMB(tx),
+ ESAI_xSMB_xS_MASK, 0);
+
+ /* Disable and reset FIFO */
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx),
+ ESAI_xFCR_xFR | ESAI_xFCR_xFEN, ESAI_xFCR_xFR);
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx),
+ ESAI_xFCR_xFR, 0);
+}
+
+static void fsl_esai_hw_reset(struct work_struct *work)
+{
+ struct fsl_esai *esai_priv = container_of(work, struct fsl_esai, work);
+ bool tx = true, rx = false, enabled[2];
+ unsigned long lock_flags;
+ u32 tfcr, rfcr;
+
+ spin_lock_irqsave(&esai_priv->lock, lock_flags);
+ /* Save the registers */
+ regmap_read(esai_priv->regmap, REG_ESAI_TFCR, &tfcr);
+ regmap_read(esai_priv->regmap, REG_ESAI_RFCR, &rfcr);
+ enabled[tx] = tfcr & ESAI_xFCR_xFEN;
+ enabled[rx] = rfcr & ESAI_xFCR_xFEN;
+
+ /* Stop the tx & rx */
+ fsl_esai_trigger_stop(esai_priv, tx);
+ fsl_esai_trigger_stop(esai_priv, rx);
+
+ /* Reset the esai, and ignore return value */
+ fsl_esai_hw_init(esai_priv);
+
+ /* Enforce ESAI personal resets for both TX and RX */
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_TCR,
+ ESAI_xCR_xPR_MASK, ESAI_xCR_xPR);
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_RCR,
+ ESAI_xCR_xPR_MASK, ESAI_xCR_xPR);
+
+ /* Restore registers by regcache_sync, and ignore return value */
+ fsl_esai_register_restore(esai_priv);
+
+ /* Remove ESAI personal resets by configuring PCRC and PRRC also */
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_TCR,
+ ESAI_xCR_xPR_MASK, 0);
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_RCR,
+ ESAI_xCR_xPR_MASK, 0);
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_PRRC,
+ ESAI_PRRC_PDC_MASK, ESAI_PRRC_PDC(ESAI_GPIO));
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_PCRC,
+ ESAI_PCRC_PC_MASK, ESAI_PCRC_PC(ESAI_GPIO));
+
+ /* Restart tx / rx, if they already enabled */
+ if (enabled[tx])
+ fsl_esai_trigger_start(esai_priv, tx);
+ if (enabled[rx])
+ fsl_esai_trigger_start(esai_priv, rx);
+
+ spin_unlock_irqrestore(&esai_priv->lock, lock_flags);
+}
+
+static int fsl_esai_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
+{
+ struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai);
+ bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
+ unsigned long lock_flags;
+
+ esai_priv->channels[tx] = substream->runtime->channels;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ spin_lock_irqsave(&esai_priv->lock, lock_flags);
+ fsl_esai_trigger_start(esai_priv, tx);
+ spin_unlock_irqrestore(&esai_priv->lock, lock_flags);
+ break;
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ spin_lock_irqsave(&esai_priv->lock, lock_flags);
+ fsl_esai_trigger_stop(esai_priv, tx);
+ spin_unlock_irqrestore(&esai_priv->lock, lock_flags);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int fsl_esai_dai_probe(struct snd_soc_dai *dai)
+{
+ struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai);
+
+ snd_soc_dai_init_dma_data(dai, &esai_priv->dma_params_tx,
+ &esai_priv->dma_params_rx);
+
+ return 0;
+}
+
+static const struct snd_soc_dai_ops fsl_esai_dai_ops = {
+ .probe = fsl_esai_dai_probe,
+ .startup = fsl_esai_startup,
+ .trigger = fsl_esai_trigger,
+ .hw_params = fsl_esai_hw_params,
+ .set_sysclk = fsl_esai_set_dai_sysclk,
+ .set_fmt = fsl_esai_set_dai_fmt,
+ .set_tdm_slot = fsl_esai_set_dai_tdm_slot,
+};
+
+static struct snd_soc_dai_driver fsl_esai_dai = {
+ .playback = {
+ .stream_name = "CPU-Playback",
+ .channels_min = 1,
+ .channels_max = 12,
+ .rates = SNDRV_PCM_RATE_8000_192000,
+ .formats = FSL_ESAI_FORMATS,
+ },
+ .capture = {
+ .stream_name = "CPU-Capture",
+ .channels_min = 1,
+ .channels_max = 8,
+ .rates = SNDRV_PCM_RATE_8000_192000,
+ .formats = FSL_ESAI_FORMATS,
+ },
+ .ops = &fsl_esai_dai_ops,
+};
+
+static const struct snd_soc_component_driver fsl_esai_component = {
+ .name = "fsl-esai",
+ .legacy_dai_naming = 1,
+};
+
+static const struct reg_default fsl_esai_reg_defaults[] = {
+ {REG_ESAI_ETDR, 0x00000000},
+ {REG_ESAI_ECR, 0x00000000},
+ {REG_ESAI_TFCR, 0x00000000},
+ {REG_ESAI_RFCR, 0x00000000},
+ {REG_ESAI_TX0, 0x00000000},
+ {REG_ESAI_TX1, 0x00000000},
+ {REG_ESAI_TX2, 0x00000000},
+ {REG_ESAI_TX3, 0x00000000},
+ {REG_ESAI_TX4, 0x00000000},
+ {REG_ESAI_TX5, 0x00000000},
+ {REG_ESAI_TSR, 0x00000000},
+ {REG_ESAI_SAICR, 0x00000000},
+ {REG_ESAI_TCR, 0x00000000},
+ {REG_ESAI_TCCR, 0x00000000},
+ {REG_ESAI_RCR, 0x00000000},
+ {REG_ESAI_RCCR, 0x00000000},
+ {REG_ESAI_TSMA, 0x0000ffff},
+ {REG_ESAI_TSMB, 0x0000ffff},
+ {REG_ESAI_RSMA, 0x0000ffff},
+ {REG_ESAI_RSMB, 0x0000ffff},
+ {REG_ESAI_PRRC, 0x00000000},
+ {REG_ESAI_PCRC, 0x00000000},
+};
+
+static bool fsl_esai_readable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case REG_ESAI_ERDR:
+ case REG_ESAI_ECR:
+ case REG_ESAI_ESR:
+ case REG_ESAI_TFCR:
+ case REG_ESAI_TFSR:
+ case REG_ESAI_RFCR:
+ case REG_ESAI_RFSR:
+ case REG_ESAI_RX0:
+ case REG_ESAI_RX1:
+ case REG_ESAI_RX2:
+ case REG_ESAI_RX3:
+ case REG_ESAI_SAISR:
+ case REG_ESAI_SAICR:
+ case REG_ESAI_TCR:
+ case REG_ESAI_TCCR:
+ case REG_ESAI_RCR:
+ case REG_ESAI_RCCR:
+ case REG_ESAI_TSMA:
+ case REG_ESAI_TSMB:
+ case REG_ESAI_RSMA:
+ case REG_ESAI_RSMB:
+ case REG_ESAI_PRRC:
+ case REG_ESAI_PCRC:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool fsl_esai_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case REG_ESAI_ERDR:
+ case REG_ESAI_ESR:
+ case REG_ESAI_TFSR:
+ case REG_ESAI_RFSR:
+ case REG_ESAI_RX0:
+ case REG_ESAI_RX1:
+ case REG_ESAI_RX2:
+ case REG_ESAI_RX3:
+ case REG_ESAI_SAISR:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool fsl_esai_writeable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case REG_ESAI_ETDR:
+ case REG_ESAI_ECR:
+ case REG_ESAI_TFCR:
+ case REG_ESAI_RFCR:
+ case REG_ESAI_TX0:
+ case REG_ESAI_TX1:
+ case REG_ESAI_TX2:
+ case REG_ESAI_TX3:
+ case REG_ESAI_TX4:
+ case REG_ESAI_TX5:
+ case REG_ESAI_TSR:
+ case REG_ESAI_SAICR:
+ case REG_ESAI_TCR:
+ case REG_ESAI_TCCR:
+ case REG_ESAI_RCR:
+ case REG_ESAI_RCCR:
+ case REG_ESAI_TSMA:
+ case REG_ESAI_TSMB:
+ case REG_ESAI_RSMA:
+ case REG_ESAI_RSMB:
+ case REG_ESAI_PRRC:
+ case REG_ESAI_PCRC:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct regmap_config fsl_esai_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+
+ .max_register = REG_ESAI_PCRC,
+ .reg_defaults = fsl_esai_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(fsl_esai_reg_defaults),
+ .readable_reg = fsl_esai_readable_reg,
+ .volatile_reg = fsl_esai_volatile_reg,
+ .writeable_reg = fsl_esai_writeable_reg,
+ .cache_type = REGCACHE_FLAT,
+};
+
+static int fsl_esai_runtime_resume(struct device *dev);
+static int fsl_esai_runtime_suspend(struct device *dev);
+
+static int fsl_esai_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct fsl_esai *esai_priv;
+ struct resource *res;
+ const __be32 *iprop;
+ void __iomem *regs;
+ int irq, ret;
+
+ esai_priv = devm_kzalloc(&pdev->dev, sizeof(*esai_priv), GFP_KERNEL);
+ if (!esai_priv)
+ return -ENOMEM;
+
+ esai_priv->pdev = pdev;
+ snprintf(esai_priv->name, sizeof(esai_priv->name), "%pOFn", np);
+
+ esai_priv->soc = of_device_get_match_data(&pdev->dev);
+
+ /* Get the addresses and IRQ */
+ regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+ if (IS_ERR(regs))
+ return PTR_ERR(regs);
+
+ esai_priv->regmap = devm_regmap_init_mmio(&pdev->dev, regs, &fsl_esai_regmap_config);
+ if (IS_ERR(esai_priv->regmap)) {
+ dev_err(&pdev->dev, "failed to init regmap: %ld\n",
+ PTR_ERR(esai_priv->regmap));
+ return PTR_ERR(esai_priv->regmap);
+ }
+
+ esai_priv->coreclk = devm_clk_get(&pdev->dev, "core");
+ if (IS_ERR(esai_priv->coreclk)) {
+ dev_err(&pdev->dev, "failed to get core clock: %ld\n",
+ PTR_ERR(esai_priv->coreclk));
+ return PTR_ERR(esai_priv->coreclk);
+ }
+
+ esai_priv->extalclk = devm_clk_get(&pdev->dev, "extal");
+ if (IS_ERR(esai_priv->extalclk))
+ dev_warn(&pdev->dev, "failed to get extal clock: %ld\n",
+ PTR_ERR(esai_priv->extalclk));
+
+ esai_priv->fsysclk = devm_clk_get(&pdev->dev, "fsys");
+ if (IS_ERR(esai_priv->fsysclk))
+ dev_warn(&pdev->dev, "failed to get fsys clock: %ld\n",
+ PTR_ERR(esai_priv->fsysclk));
+
+ esai_priv->spbaclk = devm_clk_get(&pdev->dev, "spba");
+ if (IS_ERR(esai_priv->spbaclk))
+ dev_warn(&pdev->dev, "failed to get spba clock: %ld\n",
+ PTR_ERR(esai_priv->spbaclk));
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ ret = devm_request_irq(&pdev->dev, irq, esai_isr, IRQF_SHARED,
+ esai_priv->name, esai_priv);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to claim irq %u\n", irq);
+ return ret;
+ }
+
+ /* Set a default slot number */
+ esai_priv->slots = 2;
+
+ /* Set a default clock provider state */
+ esai_priv->consumer_mode = true;
+
+ /* Determine the FIFO depth */
+ iprop = of_get_property(np, "fsl,fifo-depth", NULL);
+ if (iprop)
+ esai_priv->fifo_depth = be32_to_cpup(iprop);
+ else
+ esai_priv->fifo_depth = 64;
+
+ esai_priv->dma_params_tx.maxburst = 16;
+ esai_priv->dma_params_rx.maxburst = 16;
+ esai_priv->dma_params_tx.addr = res->start + REG_ESAI_ETDR;
+ esai_priv->dma_params_rx.addr = res->start + REG_ESAI_ERDR;
+
+ esai_priv->synchronous =
+ of_property_read_bool(np, "fsl,esai-synchronous");
+
+ /* Implement full symmetry for synchronous mode */
+ if (esai_priv->synchronous) {
+ fsl_esai_dai.symmetric_rate = 1;
+ fsl_esai_dai.symmetric_channels = 1;
+ fsl_esai_dai.symmetric_sample_bits = 1;
+ }
+
+ dev_set_drvdata(&pdev->dev, esai_priv);
+ spin_lock_init(&esai_priv->lock);
+ pm_runtime_enable(&pdev->dev);
+ if (!pm_runtime_enabled(&pdev->dev)) {
+ ret = fsl_esai_runtime_resume(&pdev->dev);
+ if (ret)
+ goto err_pm_disable;
+ }
+
+ ret = pm_runtime_resume_and_get(&pdev->dev);
+ if (ret < 0)
+ goto err_pm_get_sync;
+
+ ret = fsl_esai_hw_init(esai_priv);
+ if (ret)
+ goto err_pm_get_sync;
+
+ esai_priv->tx_mask = 0xFFFFFFFF;
+ esai_priv->rx_mask = 0xFFFFFFFF;
+
+ /* Clear the TSMA, TSMB, RSMA, RSMB */
+ regmap_write(esai_priv->regmap, REG_ESAI_TSMA, 0);
+ regmap_write(esai_priv->regmap, REG_ESAI_TSMB, 0);
+ regmap_write(esai_priv->regmap, REG_ESAI_RSMA, 0);
+ regmap_write(esai_priv->regmap, REG_ESAI_RSMB, 0);
+
+ ret = pm_runtime_put_sync(&pdev->dev);
+ if (ret < 0 && ret != -ENOSYS)
+ goto err_pm_get_sync;
+
+ /*
+ * Register platform component before registering cpu dai for there
+ * is not defer probe for platform component in snd_soc_add_pcm_runtime().
+ */
+ ret = imx_pcm_dma_init(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to init imx pcm dma: %d\n", ret);
+ goto err_pm_get_sync;
+ }
+
+ ret = devm_snd_soc_register_component(&pdev->dev, &fsl_esai_component,
+ &fsl_esai_dai, 1);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register DAI: %d\n", ret);
+ goto err_pm_get_sync;
+ }
+
+ INIT_WORK(&esai_priv->work, fsl_esai_hw_reset);
+
+ return ret;
+
+err_pm_get_sync:
+ if (!pm_runtime_status_suspended(&pdev->dev))
+ fsl_esai_runtime_suspend(&pdev->dev);
+err_pm_disable:
+ pm_runtime_disable(&pdev->dev);
+ return ret;
+}
+
+static void fsl_esai_remove(struct platform_device *pdev)
+{
+ struct fsl_esai *esai_priv = platform_get_drvdata(pdev);
+
+ pm_runtime_disable(&pdev->dev);
+ if (!pm_runtime_status_suspended(&pdev->dev))
+ fsl_esai_runtime_suspend(&pdev->dev);
+
+ cancel_work_sync(&esai_priv->work);
+}
+
+static const struct of_device_id fsl_esai_dt_ids[] = {
+ { .compatible = "fsl,imx35-esai", .data = &fsl_esai_imx35 },
+ { .compatible = "fsl,vf610-esai", .data = &fsl_esai_vf610 },
+ { .compatible = "fsl,imx6ull-esai", .data = &fsl_esai_imx6ull },
+ {}
+};
+MODULE_DEVICE_TABLE(of, fsl_esai_dt_ids);
+
+static int fsl_esai_runtime_resume(struct device *dev)
+{
+ struct fsl_esai *esai = dev_get_drvdata(dev);
+ int ret;
+
+ /*
+ * Some platforms might use the same bit to gate all three or two of
+ * clocks, so keep all clocks open/close at the same time for safety
+ */
+ ret = clk_prepare_enable(esai->coreclk);
+ if (ret)
+ return ret;
+ if (!IS_ERR(esai->spbaclk)) {
+ ret = clk_prepare_enable(esai->spbaclk);
+ if (ret)
+ goto err_spbaclk;
+ }
+ if (!IS_ERR(esai->extalclk)) {
+ ret = clk_prepare_enable(esai->extalclk);
+ if (ret)
+ goto err_extalclk;
+ }
+ if (!IS_ERR(esai->fsysclk)) {
+ ret = clk_prepare_enable(esai->fsysclk);
+ if (ret)
+ goto err_fsysclk;
+ }
+
+ regcache_cache_only(esai->regmap, false);
+
+ ret = fsl_esai_register_restore(esai);
+ if (ret)
+ goto err_regcache_sync;
+
+ return 0;
+
+err_regcache_sync:
+ if (!IS_ERR(esai->fsysclk))
+ clk_disable_unprepare(esai->fsysclk);
+err_fsysclk:
+ if (!IS_ERR(esai->extalclk))
+ clk_disable_unprepare(esai->extalclk);
+err_extalclk:
+ if (!IS_ERR(esai->spbaclk))
+ clk_disable_unprepare(esai->spbaclk);
+err_spbaclk:
+ clk_disable_unprepare(esai->coreclk);
+
+ return ret;
+}
+
+static int fsl_esai_runtime_suspend(struct device *dev)
+{
+ struct fsl_esai *esai = dev_get_drvdata(dev);
+
+ regcache_cache_only(esai->regmap, true);
+
+ if (!IS_ERR(esai->fsysclk))
+ clk_disable_unprepare(esai->fsysclk);
+ if (!IS_ERR(esai->extalclk))
+ clk_disable_unprepare(esai->extalclk);
+ if (!IS_ERR(esai->spbaclk))
+ clk_disable_unprepare(esai->spbaclk);
+ clk_disable_unprepare(esai->coreclk);
+
+ return 0;
+}
+
+static const struct dev_pm_ops fsl_esai_pm_ops = {
+ SET_RUNTIME_PM_OPS(fsl_esai_runtime_suspend,
+ fsl_esai_runtime_resume,
+ NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+};
+
+static struct platform_driver fsl_esai_driver = {
+ .probe = fsl_esai_probe,
+ .remove_new = fsl_esai_remove,
+ .driver = {
+ .name = "fsl-esai-dai",
+ .pm = &fsl_esai_pm_ops,
+ .of_match_table = fsl_esai_dt_ids,
+ },
+};
+
+module_platform_driver(fsl_esai_driver);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("Freescale ESAI CPU DAI driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:fsl-esai-dai");