summaryrefslogtreecommitdiffstats
path: root/sound/soc/pxa/pxa-ssp.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/pxa/pxa-ssp.c')
-rw-r--r--sound/soc/pxa/pxa-ssp.c887
1 files changed, 887 insertions, 0 deletions
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
new file mode 100644
index 0000000000..b8a3cb8b75
--- /dev/null
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -0,0 +1,887 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * pxa-ssp.c -- ALSA Soc Audio Layer
+ *
+ * Copyright 2005,2008 Wolfson Microelectronics PLC.
+ * Author: Liam Girdwood
+ * Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * TODO:
+ * o Test network mode for > 16bit sample size
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pxa2xx_ssp.h>
+#include <linux/of.h>
+#include <linux/dmaengine.h>
+
+#include <asm/irq.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/initval.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/pxa2xx-lib.h>
+#include <sound/dmaengine_pcm.h>
+
+#include "pxa-ssp.h"
+
+/*
+ * SSP audio private data
+ */
+struct ssp_priv {
+ struct ssp_device *ssp;
+ struct clk *extclk;
+ unsigned long ssp_clk;
+ unsigned int sysclk;
+ unsigned int dai_fmt;
+ unsigned int configured_dai_fmt;
+#ifdef CONFIG_PM
+ uint32_t cr0;
+ uint32_t cr1;
+ uint32_t to;
+ uint32_t psp;
+#endif
+};
+
+static void dump_registers(struct ssp_device *ssp)
+{
+ dev_dbg(ssp->dev, "SSCR0 0x%08x SSCR1 0x%08x SSTO 0x%08x\n",
+ pxa_ssp_read_reg(ssp, SSCR0), pxa_ssp_read_reg(ssp, SSCR1),
+ pxa_ssp_read_reg(ssp, SSTO));
+
+ dev_dbg(ssp->dev, "SSPSP 0x%08x SSSR 0x%08x SSACD 0x%08x\n",
+ pxa_ssp_read_reg(ssp, SSPSP), pxa_ssp_read_reg(ssp, SSSR),
+ pxa_ssp_read_reg(ssp, SSACD));
+}
+
+static void pxa_ssp_set_dma_params(struct ssp_device *ssp, int width4,
+ int out, struct snd_dmaengine_dai_dma_data *dma)
+{
+ dma->addr_width = width4 ? DMA_SLAVE_BUSWIDTH_4_BYTES :
+ DMA_SLAVE_BUSWIDTH_2_BYTES;
+ dma->maxburst = 16;
+ dma->addr = ssp->phys_base + SSDR;
+}
+
+static int pxa_ssp_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *cpu_dai)
+{
+ struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
+ struct ssp_device *ssp = priv->ssp;
+ struct snd_dmaengine_dai_dma_data *dma;
+ int ret = 0;
+
+ if (!snd_soc_dai_active(cpu_dai)) {
+ clk_prepare_enable(ssp->clk);
+ pxa_ssp_disable(ssp);
+ }
+
+ clk_prepare_enable(priv->extclk);
+
+ dma = kzalloc(sizeof(struct snd_dmaengine_dai_dma_data), GFP_KERNEL);
+ if (!dma)
+ return -ENOMEM;
+ dma->chan_name = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+ "tx" : "rx";
+
+ snd_soc_dai_set_dma_data(cpu_dai, substream, dma);
+
+ return ret;
+}
+
+static void pxa_ssp_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *cpu_dai)
+{
+ struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
+ struct ssp_device *ssp = priv->ssp;
+
+ if (!snd_soc_dai_active(cpu_dai)) {
+ pxa_ssp_disable(ssp);
+ clk_disable_unprepare(ssp->clk);
+ }
+
+ clk_disable_unprepare(priv->extclk);
+
+ kfree(snd_soc_dai_get_dma_data(cpu_dai, substream));
+ snd_soc_dai_set_dma_data(cpu_dai, substream, NULL);
+}
+
+#ifdef CONFIG_PM
+
+static int pxa_ssp_suspend(struct snd_soc_component *component)
+{
+ struct ssp_priv *priv = snd_soc_component_get_drvdata(component);
+ struct ssp_device *ssp = priv->ssp;
+
+ if (!snd_soc_component_active(component))
+ clk_prepare_enable(ssp->clk);
+
+ priv->cr0 = __raw_readl(ssp->mmio_base + SSCR0);
+ priv->cr1 = __raw_readl(ssp->mmio_base + SSCR1);
+ priv->to = __raw_readl(ssp->mmio_base + SSTO);
+ priv->psp = __raw_readl(ssp->mmio_base + SSPSP);
+
+ pxa_ssp_disable(ssp);
+ clk_disable_unprepare(ssp->clk);
+ return 0;
+}
+
+static int pxa_ssp_resume(struct snd_soc_component *component)
+{
+ struct ssp_priv *priv = snd_soc_component_get_drvdata(component);
+ struct ssp_device *ssp = priv->ssp;
+ uint32_t sssr = SSSR_ROR | SSSR_TUR | SSSR_BCE;
+
+ clk_prepare_enable(ssp->clk);
+
+ __raw_writel(sssr, ssp->mmio_base + SSSR);
+ __raw_writel(priv->cr0 & ~SSCR0_SSE, ssp->mmio_base + SSCR0);
+ __raw_writel(priv->cr1, ssp->mmio_base + SSCR1);
+ __raw_writel(priv->to, ssp->mmio_base + SSTO);
+ __raw_writel(priv->psp, ssp->mmio_base + SSPSP);
+
+ if (snd_soc_component_active(component))
+ pxa_ssp_enable(ssp);
+ else
+ clk_disable_unprepare(ssp->clk);
+
+ return 0;
+}
+
+#else
+#define pxa_ssp_suspend NULL
+#define pxa_ssp_resume NULL
+#endif
+
+/*
+ * ssp_set_clkdiv - set SSP clock divider
+ * @div: serial clock rate divider
+ */
+static void pxa_ssp_set_scr(struct ssp_device *ssp, u32 div)
+{
+ u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
+
+ if (ssp->type == PXA25x_SSP) {
+ sscr0 &= ~0x0000ff00;
+ sscr0 |= ((div - 2)/2) << 8; /* 2..512 */
+ } else {
+ sscr0 &= ~0x000fff00;
+ sscr0 |= (div - 1) << 8; /* 1..4096 */
+ }
+ pxa_ssp_write_reg(ssp, SSCR0, sscr0);
+}
+
+/*
+ * Set the SSP ports SYSCLK.
+ */
+static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
+ struct ssp_device *ssp = priv->ssp;
+
+ u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0) &
+ ~(SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS);
+
+ if (priv->extclk) {
+ int ret;
+
+ /*
+ * For DT based boards, if an extclk is given, use it
+ * here and configure PXA_SSP_CLK_EXT.
+ */
+
+ ret = clk_set_rate(priv->extclk, freq);
+ if (ret < 0)
+ return ret;
+
+ clk_id = PXA_SSP_CLK_EXT;
+ }
+
+ dev_dbg(ssp->dev,
+ "pxa_ssp_set_dai_sysclk id: %d, clk_id %d, freq %u\n",
+ cpu_dai->id, clk_id, freq);
+
+ switch (clk_id) {
+ case PXA_SSP_CLK_NET_PLL:
+ sscr0 |= SSCR0_MOD;
+ break;
+ case PXA_SSP_CLK_PLL:
+ /* Internal PLL is fixed */
+ if (ssp->type == PXA25x_SSP)
+ priv->sysclk = 1843200;
+ else
+ priv->sysclk = 13000000;
+ break;
+ case PXA_SSP_CLK_EXT:
+ priv->sysclk = freq;
+ sscr0 |= SSCR0_ECS;
+ break;
+ case PXA_SSP_CLK_NET:
+ priv->sysclk = freq;
+ sscr0 |= SSCR0_NCS | SSCR0_MOD;
+ break;
+ case PXA_SSP_CLK_AUDIO:
+ priv->sysclk = 0;
+ pxa_ssp_set_scr(ssp, 1);
+ sscr0 |= SSCR0_ACS;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ /* The SSP clock must be disabled when changing SSP clock mode
+ * on PXA2xx. On PXA3xx it must be enabled when doing so. */
+ if (ssp->type != PXA3xx_SSP)
+ clk_disable_unprepare(ssp->clk);
+ pxa_ssp_write_reg(ssp, SSCR0, sscr0);
+ if (ssp->type != PXA3xx_SSP)
+ clk_prepare_enable(ssp->clk);
+
+ return 0;
+}
+
+/*
+ * Configure the PLL frequency pxa27x and (afaik - pxa320 only)
+ */
+static int pxa_ssp_set_pll(struct ssp_priv *priv, unsigned int freq)
+{
+ struct ssp_device *ssp = priv->ssp;
+ u32 ssacd = pxa_ssp_read_reg(ssp, SSACD) & ~0x70;
+
+ if (ssp->type == PXA3xx_SSP)
+ pxa_ssp_write_reg(ssp, SSACDD, 0);
+
+ switch (freq) {
+ case 5622000:
+ break;
+ case 11345000:
+ ssacd |= (0x1 << 4);
+ break;
+ case 12235000:
+ ssacd |= (0x2 << 4);
+ break;
+ case 14857000:
+ ssacd |= (0x3 << 4);
+ break;
+ case 32842000:
+ ssacd |= (0x4 << 4);
+ break;
+ case 48000000:
+ ssacd |= (0x5 << 4);
+ break;
+ case 0:
+ /* Disable */
+ break;
+
+ default:
+ /* PXA3xx has a clock ditherer which can be used to generate
+ * a wider range of frequencies - calculate a value for it.
+ */
+ if (ssp->type == PXA3xx_SSP) {
+ u32 val;
+ u64 tmp = 19968;
+
+ tmp *= 1000000;
+ do_div(tmp, freq);
+ val = tmp;
+
+ val = (val << 16) | 64;
+ pxa_ssp_write_reg(ssp, SSACDD, val);
+
+ ssacd |= (0x6 << 4);
+
+ dev_dbg(ssp->dev,
+ "Using SSACDD %x to supply %uHz\n",
+ val, freq);
+ break;
+ }
+
+ return -EINVAL;
+ }
+
+ pxa_ssp_write_reg(ssp, SSACD, ssacd);
+
+ return 0;
+}
+
+/*
+ * Set the active slots in TDM/Network mode
+ */
+static int pxa_ssp_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai,
+ unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width)
+{
+ struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
+ struct ssp_device *ssp = priv->ssp;
+ u32 sscr0;
+
+ sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
+ sscr0 &= ~(SSCR0_MOD | SSCR0_SlotsPerFrm(8) | SSCR0_EDSS | SSCR0_DSS);
+
+ /* set slot width */
+ if (slot_width > 16)
+ sscr0 |= SSCR0_EDSS | SSCR0_DataSize(slot_width - 16);
+ else
+ sscr0 |= SSCR0_DataSize(slot_width);
+
+ if (slots > 1) {
+ /* enable network mode */
+ sscr0 |= SSCR0_MOD;
+
+ /* set number of active slots */
+ sscr0 |= SSCR0_SlotsPerFrm(slots);
+
+ /* set active slot mask */
+ pxa_ssp_write_reg(ssp, SSTSA, tx_mask);
+ pxa_ssp_write_reg(ssp, SSRSA, rx_mask);
+ }
+ pxa_ssp_write_reg(ssp, SSCR0, sscr0);
+
+ return 0;
+}
+
+/*
+ * Tristate the SSP DAI lines
+ */
+static int pxa_ssp_set_dai_tristate(struct snd_soc_dai *cpu_dai,
+ int tristate)
+{
+ struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
+ struct ssp_device *ssp = priv->ssp;
+ u32 sscr1;
+
+ sscr1 = pxa_ssp_read_reg(ssp, SSCR1);
+ if (tristate)
+ sscr1 &= ~SSCR1_TTE;
+ else
+ sscr1 |= SSCR1_TTE;
+ pxa_ssp_write_reg(ssp, SSCR1, sscr1);
+
+ return 0;
+}
+
+static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai,
+ unsigned int fmt)
+{
+ struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
+
+ switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
+ case SND_SOC_DAIFMT_BC_FC:
+ case SND_SOC_DAIFMT_BC_FP:
+ case SND_SOC_DAIFMT_BP_FP:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ case SND_SOC_DAIFMT_NB_IF:
+ case SND_SOC_DAIFMT_IB_IF:
+ case SND_SOC_DAIFMT_IB_NF:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ case SND_SOC_DAIFMT_DSP_A:
+ case SND_SOC_DAIFMT_DSP_B:
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ /* Settings will be applied in hw_params() */
+ priv->dai_fmt = fmt;
+
+ return 0;
+}
+
+/*
+ * Set up the SSP DAI format.
+ * The SSP Port must be inactive before calling this function as the
+ * physical interface format is changed.
+ */
+static int pxa_ssp_configure_dai_fmt(struct ssp_priv *priv)
+{
+ struct ssp_device *ssp = priv->ssp;
+ u32 sscr0, sscr1, sspsp, scfr;
+
+ /* check if we need to change anything at all */
+ if (priv->configured_dai_fmt == priv->dai_fmt)
+ return 0;
+
+ /* reset port settings */
+ sscr0 = pxa_ssp_read_reg(ssp, SSCR0) &
+ ~(SSCR0_PSP | SSCR0_MOD);
+ sscr1 = pxa_ssp_read_reg(ssp, SSCR1) &
+ ~(SSCR1_SCLKDIR | SSCR1_SFRMDIR | SSCR1_SCFR |
+ SSCR1_RWOT | SSCR1_TRAIL | SSCR1_TFT | SSCR1_RFT);
+ sspsp = pxa_ssp_read_reg(ssp, SSPSP) &
+ ~(SSPSP_SFRMP | SSPSP_SCMODE(3));
+
+ sscr1 |= SSCR1_RxTresh(8) | SSCR1_TxTresh(7);
+
+ switch (priv->dai_fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
+ case SND_SOC_DAIFMT_BC_FC:
+ sscr1 |= SSCR1_SCLKDIR | SSCR1_SFRMDIR | SSCR1_SCFR;
+ break;
+ case SND_SOC_DAIFMT_BC_FP:
+ sscr1 |= SSCR1_SCLKDIR | SSCR1_SCFR;
+ break;
+ case SND_SOC_DAIFMT_BP_FP:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (priv->dai_fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ sspsp |= SSPSP_SFRMP;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ sspsp |= SSPSP_SCMODE(2);
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (priv->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ sscr0 |= SSCR0_PSP;
+ sscr1 |= SSCR1_RWOT | SSCR1_TRAIL;
+ /* See hw_params() */
+ break;
+
+ case SND_SOC_DAIFMT_DSP_A:
+ sspsp |= SSPSP_FSRT;
+ fallthrough;
+ case SND_SOC_DAIFMT_DSP_B:
+ sscr0 |= SSCR0_MOD | SSCR0_PSP;
+ sscr1 |= SSCR1_TRAIL | SSCR1_RWOT;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ pxa_ssp_write_reg(ssp, SSCR0, sscr0);
+ pxa_ssp_write_reg(ssp, SSCR1, sscr1);
+ pxa_ssp_write_reg(ssp, SSPSP, sspsp);
+
+ switch (priv->dai_fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
+ case SND_SOC_DAIFMT_BC_FC:
+ case SND_SOC_DAIFMT_BC_FP:
+ scfr = pxa_ssp_read_reg(ssp, SSCR1) | SSCR1_SCFR;
+ pxa_ssp_write_reg(ssp, SSCR1, scfr);
+
+ while (pxa_ssp_read_reg(ssp, SSSR) & SSSR_BSY)
+ cpu_relax();
+ break;
+ }
+
+ dump_registers(ssp);
+
+ /* Since we are configuring the timings for the format by hand
+ * we have to defer some things until hw_params() where we
+ * know parameters like the sample size.
+ */
+ priv->configured_dai_fmt = priv->dai_fmt;
+
+ return 0;
+}
+
+struct pxa_ssp_clock_mode {
+ int rate;
+ int pll;
+ u8 acds;
+ u8 scdb;
+};
+
+static const struct pxa_ssp_clock_mode pxa_ssp_clock_modes[] = {
+ { .rate = 8000, .pll = 32842000, .acds = SSACD_ACDS_32, .scdb = SSACD_SCDB_4X },
+ { .rate = 11025, .pll = 5622000, .acds = SSACD_ACDS_4, .scdb = SSACD_SCDB_4X },
+ { .rate = 16000, .pll = 32842000, .acds = SSACD_ACDS_16, .scdb = SSACD_SCDB_4X },
+ { .rate = 22050, .pll = 5622000, .acds = SSACD_ACDS_2, .scdb = SSACD_SCDB_4X },
+ { .rate = 44100, .pll = 11345000, .acds = SSACD_ACDS_2, .scdb = SSACD_SCDB_4X },
+ { .rate = 48000, .pll = 12235000, .acds = SSACD_ACDS_2, .scdb = SSACD_SCDB_4X },
+ { .rate = 96000, .pll = 12235000, .acds = SSACD_ACDS_4, .scdb = SSACD_SCDB_1X },
+ {}
+};
+
+/*
+ * Set the SSP audio DMA parameters and sample size.
+ * Can be called multiple times by oss emulation.
+ */
+static int pxa_ssp_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *cpu_dai)
+{
+ struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
+ struct ssp_device *ssp = priv->ssp;
+ int chn = params_channels(params);
+ u32 sscr0, sspsp;
+ int width = snd_pcm_format_physical_width(params_format(params));
+ int ttsa = pxa_ssp_read_reg(ssp, SSTSA) & 0xf;
+ struct snd_dmaengine_dai_dma_data *dma_data;
+ int rate = params_rate(params);
+ int bclk = rate * chn * (width / 8);
+ int ret;
+
+ dma_data = snd_soc_dai_get_dma_data(cpu_dai, substream);
+
+ /* Network mode with one active slot (ttsa == 1) can be used
+ * to force 16-bit frame width on the wire (for S16_LE), even
+ * with two channels. Use 16-bit DMA transfers for this case.
+ */
+ pxa_ssp_set_dma_params(ssp,
+ ((chn == 2) && (ttsa != 1)) || (width == 32),
+ substream->stream == SNDRV_PCM_STREAM_PLAYBACK, dma_data);
+
+ /* we can only change the settings if the port is not in use */
+ if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE)
+ return 0;
+
+ ret = pxa_ssp_configure_dai_fmt(priv);
+ if (ret < 0)
+ return ret;
+
+ /* clear selected SSP bits */
+ sscr0 = pxa_ssp_read_reg(ssp, SSCR0) & ~(SSCR0_DSS | SSCR0_EDSS);
+
+ /* bit size */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ if (ssp->type == PXA3xx_SSP)
+ sscr0 |= SSCR0_FPCKE;
+ sscr0 |= SSCR0_DataSize(16);
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(8));
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(16));
+ break;
+ }
+ pxa_ssp_write_reg(ssp, SSCR0, sscr0);
+
+ if (sscr0 & SSCR0_ACS) {
+ ret = pxa_ssp_set_pll(priv, bclk);
+
+ /*
+ * If we were able to generate the bclk directly,
+ * all is fine. Otherwise, look up the closest rate
+ * from the table and also set the dividers.
+ */
+
+ if (ret < 0) {
+ const struct pxa_ssp_clock_mode *m;
+ int ssacd;
+
+ for (m = pxa_ssp_clock_modes; m->rate; m++) {
+ if (m->rate == rate)
+ break;
+ }
+
+ if (!m->rate)
+ return -EINVAL;
+
+ ret = pxa_ssp_set_pll(priv, bclk);
+ if (ret < 0)
+ return ret;
+
+ ssacd = pxa_ssp_read_reg(ssp, SSACD);
+ ssacd &= ~(SSACD_ACDS(7) | SSACD_SCDB_1X);
+ ssacd |= SSACD_ACDS(m->acds);
+ ssacd |= m->scdb;
+ pxa_ssp_write_reg(ssp, SSACD, ssacd);
+ }
+ } else if (sscr0 & SSCR0_ECS) {
+ /*
+ * For setups with external clocking, the PLL and its diviers
+ * are not active. Instead, the SCR bits in SSCR0 can be used
+ * to divide the clock.
+ */
+ pxa_ssp_set_scr(ssp, bclk / rate);
+ }
+
+ switch (priv->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ sspsp = pxa_ssp_read_reg(ssp, SSPSP);
+
+ if (((priv->sysclk / bclk) == 64) && (width == 16)) {
+ /* This is a special case where the bitclk is 64fs
+ * and we're not dealing with 2*32 bits of audio
+ * samples.
+ *
+ * The SSP values used for that are all found out by
+ * trying and failing a lot; some of the registers
+ * needed for that mode are only available on PXA3xx.
+ */
+ if (ssp->type != PXA3xx_SSP)
+ return -EINVAL;
+
+ sspsp |= SSPSP_SFRMWDTH(width * 2);
+ sspsp |= SSPSP_SFRMDLY(width * 4);
+ sspsp |= SSPSP_EDMYSTOP(3);
+ sspsp |= SSPSP_DMYSTOP(3);
+ sspsp |= SSPSP_DMYSTRT(1);
+ } else {
+ /* The frame width is the width the LRCLK is
+ * asserted for; the delay is expressed in
+ * half cycle units. We need the extra cycle
+ * because the data starts clocking out one BCLK
+ * after LRCLK changes polarity.
+ */
+ sspsp |= SSPSP_SFRMWDTH(width + 1);
+ sspsp |= SSPSP_SFRMDLY((width + 1) * 2);
+ sspsp |= SSPSP_DMYSTRT(1);
+ }
+
+ pxa_ssp_write_reg(ssp, SSPSP, sspsp);
+ break;
+ default:
+ break;
+ }
+
+ /* When we use a network mode, we always require TDM slots
+ * - complain loudly and fail if they've not been set up yet.
+ */
+ if ((sscr0 & SSCR0_MOD) && !ttsa) {
+ dev_err(ssp->dev, "No TDM timeslot configured\n");
+ return -EINVAL;
+ }
+
+ dump_registers(ssp);
+
+ return 0;
+}
+
+static void pxa_ssp_set_running_bit(struct snd_pcm_substream *substream,
+ struct ssp_device *ssp, int value)
+{
+ uint32_t sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
+ uint32_t sscr1 = pxa_ssp_read_reg(ssp, SSCR1);
+ uint32_t sspsp = pxa_ssp_read_reg(ssp, SSPSP);
+ uint32_t sssr = pxa_ssp_read_reg(ssp, SSSR);
+
+ if (value && (sscr0 & SSCR0_SSE))
+ pxa_ssp_write_reg(ssp, SSCR0, sscr0 & ~SSCR0_SSE);
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ if (value)
+ sscr1 |= SSCR1_TSRE;
+ else
+ sscr1 &= ~SSCR1_TSRE;
+ } else {
+ if (value)
+ sscr1 |= SSCR1_RSRE;
+ else
+ sscr1 &= ~SSCR1_RSRE;
+ }
+
+ pxa_ssp_write_reg(ssp, SSCR1, sscr1);
+
+ if (value) {
+ pxa_ssp_write_reg(ssp, SSSR, sssr);
+ pxa_ssp_write_reg(ssp, SSPSP, sspsp);
+ pxa_ssp_write_reg(ssp, SSCR0, sscr0 | SSCR0_SSE);
+ }
+}
+
+static int pxa_ssp_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *cpu_dai)
+{
+ int ret = 0;
+ struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
+ struct ssp_device *ssp = priv->ssp;
+ int val;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_RESUME:
+ pxa_ssp_enable(ssp);
+ break;
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ pxa_ssp_set_running_bit(substream, ssp, 1);
+ val = pxa_ssp_read_reg(ssp, SSSR);
+ pxa_ssp_write_reg(ssp, SSSR, val);
+ break;
+ case SNDRV_PCM_TRIGGER_START:
+ pxa_ssp_set_running_bit(substream, ssp, 1);
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ pxa_ssp_set_running_bit(substream, ssp, 0);
+ break;
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ pxa_ssp_disable(ssp);
+ break;
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ pxa_ssp_set_running_bit(substream, ssp, 0);
+ break;
+
+ default:
+ ret = -EINVAL;
+ }
+
+ dump_registers(ssp);
+
+ return ret;
+}
+
+static int pxa_ssp_probe(struct snd_soc_dai *dai)
+{
+ struct device *dev = dai->dev;
+ struct ssp_priv *priv;
+ int ret;
+
+ priv = kzalloc(sizeof(struct ssp_priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ if (dev->of_node) {
+ struct device_node *ssp_handle;
+
+ ssp_handle = of_parse_phandle(dev->of_node, "port", 0);
+ if (!ssp_handle) {
+ dev_err(dev, "unable to get 'port' phandle\n");
+ ret = -ENODEV;
+ goto err_priv;
+ }
+
+ priv->ssp = pxa_ssp_request_of(ssp_handle, "SoC audio");
+ if (priv->ssp == NULL) {
+ ret = -ENODEV;
+ goto err_priv;
+ }
+
+ priv->extclk = devm_clk_get(dev, "extclk");
+ if (IS_ERR(priv->extclk)) {
+ ret = PTR_ERR(priv->extclk);
+ if (ret == -EPROBE_DEFER)
+ goto err_priv;
+
+ priv->extclk = NULL;
+ }
+ } else {
+ priv->ssp = pxa_ssp_request(dai->id + 1, "SoC audio");
+ if (priv->ssp == NULL) {
+ ret = -ENODEV;
+ goto err_priv;
+ }
+ }
+
+ priv->dai_fmt = (unsigned int) -1;
+ snd_soc_dai_set_drvdata(dai, priv);
+
+ return 0;
+
+err_priv:
+ kfree(priv);
+ return ret;
+}
+
+static int pxa_ssp_remove(struct snd_soc_dai *dai)
+{
+ struct ssp_priv *priv = snd_soc_dai_get_drvdata(dai);
+
+ pxa_ssp_free(priv->ssp);
+ kfree(priv);
+ return 0;
+}
+
+#define PXA_SSP_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
+ SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \
+ SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
+ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_64000 | \
+ SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
+
+#define PXA_SSP_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static const struct snd_soc_dai_ops pxa_ssp_dai_ops = {
+ .probe = pxa_ssp_probe,
+ .remove = pxa_ssp_remove,
+ .startup = pxa_ssp_startup,
+ .shutdown = pxa_ssp_shutdown,
+ .trigger = pxa_ssp_trigger,
+ .hw_params = pxa_ssp_hw_params,
+ .set_sysclk = pxa_ssp_set_dai_sysclk,
+ .set_fmt = pxa_ssp_set_dai_fmt,
+ .set_tdm_slot = pxa_ssp_set_dai_tdm_slot,
+ .set_tristate = pxa_ssp_set_dai_tristate,
+};
+
+static struct snd_soc_dai_driver pxa_ssp_dai = {
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 8,
+ .rates = PXA_SSP_RATES,
+ .formats = PXA_SSP_FORMATS,
+ },
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 8,
+ .rates = PXA_SSP_RATES,
+ .formats = PXA_SSP_FORMATS,
+ },
+ .ops = &pxa_ssp_dai_ops,
+};
+
+static const struct snd_soc_component_driver pxa_ssp_component = {
+ .name = "pxa-ssp",
+ .pcm_construct = pxa2xx_soc_pcm_new,
+ .open = pxa2xx_soc_pcm_open,
+ .close = pxa2xx_soc_pcm_close,
+ .hw_params = pxa2xx_soc_pcm_hw_params,
+ .prepare = pxa2xx_soc_pcm_prepare,
+ .trigger = pxa2xx_soc_pcm_trigger,
+ .pointer = pxa2xx_soc_pcm_pointer,
+ .suspend = pxa_ssp_suspend,
+ .resume = pxa_ssp_resume,
+ .legacy_dai_naming = 1,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id pxa_ssp_of_ids[] = {
+ { .compatible = "mrvl,pxa-ssp-dai" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, pxa_ssp_of_ids);
+#endif
+
+static int asoc_ssp_probe(struct platform_device *pdev)
+{
+ return devm_snd_soc_register_component(&pdev->dev, &pxa_ssp_component,
+ &pxa_ssp_dai, 1);
+}
+
+static struct platform_driver asoc_ssp_driver = {
+ .driver = {
+ .name = "pxa-ssp-dai",
+ .of_match_table = of_match_ptr(pxa_ssp_of_ids),
+ },
+
+ .probe = asoc_ssp_probe,
+};
+
+module_platform_driver(asoc_ssp_driver);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("PXA SSP/PCM SoC Interface");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa-ssp-dai");