summaryrefslogtreecommitdiffstats
path: root/tools/testing/selftests/drivers/net/hw
diff options
context:
space:
mode:
Diffstat (limited to 'tools/testing/selftests/drivers/net/hw')
-rw-r--r--tools/testing/selftests/drivers/net/hw/Makefile28
-rwxr-xr-xtools/testing/selftests/drivers/net/hw/csum.py122
-rwxr-xr-xtools/testing/selftests/drivers/net/hw/devlink_port_split.py309
-rwxr-xr-xtools/testing/selftests/drivers/net/hw/ethtool.sh297
-rwxr-xr-xtools/testing/selftests/drivers/net/hw/ethtool_extended_state.sh116
-rw-r--r--tools/testing/selftests/drivers/net/hw/ethtool_lib.sh120
-rwxr-xr-xtools/testing/selftests/drivers/net/hw/ethtool_mm.sh341
-rwxr-xr-xtools/testing/selftests/drivers/net/hw/ethtool_rmon.sh145
-rwxr-xr-xtools/testing/selftests/drivers/net/hw/hw_stats_l3.sh334
-rwxr-xr-xtools/testing/selftests/drivers/net/hw/hw_stats_l3_gre.sh111
-rw-r--r--tools/testing/selftests/drivers/net/hw/lib/py/__init__.py16
-rwxr-xr-xtools/testing/selftests/drivers/net/hw/loopback.sh103
-rwxr-xr-xtools/testing/selftests/drivers/net/hw/pp_alloc_fail.py129
-rw-r--r--tools/testing/selftests/drivers/net/hw/settings1
14 files changed, 2172 insertions, 0 deletions
diff --git a/tools/testing/selftests/drivers/net/hw/Makefile b/tools/testing/selftests/drivers/net/hw/Makefile
new file mode 100644
index 0000000000..4933d045ab
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/hw/Makefile
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0+ OR MIT
+
+TEST_PROGS = \
+ csum.py \
+ devlink_port_split.py \
+ ethtool.sh \
+ ethtool_extended_state.sh \
+ ethtool_mm.sh \
+ ethtool_rmon.sh \
+ hw_stats_l3.sh \
+ hw_stats_l3_gre.sh \
+ loopback.sh \
+ pp_alloc_fail.py \
+ #
+
+TEST_FILES := \
+ ethtool_lib.sh \
+ #
+
+TEST_INCLUDES := \
+ $(wildcard lib/py/*.py ../lib/py/*.py) \
+ ../../../net/lib.sh \
+ ../../../net/forwarding/lib.sh \
+ ../../../net/forwarding/ipip_lib.sh \
+ ../../../net/forwarding/tc_common.sh \
+ #
+
+include ../../../lib.mk
diff --git a/tools/testing/selftests/drivers/net/hw/csum.py b/tools/testing/selftests/drivers/net/hw/csum.py
new file mode 100755
index 0000000000..cb40497fae
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/hw/csum.py
@@ -0,0 +1,122 @@
+#!/usr/bin/env python3
+# SPDX-License-Identifier: GPL-2.0
+
+"""Run the tools/testing/selftests/net/csum testsuite."""
+
+from os import path
+
+from lib.py import ksft_run, ksft_exit, KsftSkipEx
+from lib.py import EthtoolFamily, NetDrvEpEnv
+from lib.py import bkg, cmd, wait_port_listen
+
+def test_receive(cfg, ipv4=False, extra_args=None):
+ """Test local nic checksum receive. Remote host sends crafted packets."""
+ if not cfg.have_rx_csum:
+ raise KsftSkipEx(f"Test requires rx checksum offload on {cfg.ifname}")
+
+ if ipv4:
+ ip_args = f"-4 -S {cfg.remote_v4} -D {cfg.v4}"
+ else:
+ ip_args = f"-6 -S {cfg.remote_v6} -D {cfg.v6}"
+
+ rx_cmd = f"{cfg.bin_local} -i {cfg.ifname} -n 100 {ip_args} -r 1 -R {extra_args}"
+ tx_cmd = f"{cfg.bin_remote} -i {cfg.ifname} -n 100 {ip_args} -r 1 -T {extra_args}"
+
+ with bkg(rx_cmd, exit_wait=True):
+ wait_port_listen(34000, proto="udp")
+ cmd(tx_cmd, host=cfg.remote)
+
+
+def test_transmit(cfg, ipv4=False, extra_args=None):
+ """Test local nic checksum transmit. Remote host verifies packets."""
+ if (not cfg.have_tx_csum_generic and
+ not (cfg.have_tx_csum_ipv4 and ipv4) and
+ not (cfg.have_tx_csum_ipv6 and not ipv4)):
+ raise KsftSkipEx(f"Test requires tx checksum offload on {cfg.ifname}")
+
+ if ipv4:
+ ip_args = f"-4 -S {cfg.v4} -D {cfg.remote_v4}"
+ else:
+ ip_args = f"-6 -S {cfg.v6} -D {cfg.remote_v6}"
+
+ # Cannot randomize input when calculating zero checksum
+ if extra_args != "-U -Z":
+ extra_args += " -r 1"
+
+ rx_cmd = f"{cfg.bin_remote} -i {cfg.ifname} -L 1 -n 100 {ip_args} -R {extra_args}"
+ tx_cmd = f"{cfg.bin_local} -i {cfg.ifname} -L 1 -n 100 {ip_args} -T {extra_args}"
+
+ with bkg(rx_cmd, host=cfg.remote, exit_wait=True):
+ wait_port_listen(34000, proto="udp", host=cfg.remote)
+ cmd(tx_cmd)
+
+
+def test_builder(name, cfg, ipv4=False, tx=False, extra_args=""):
+ """Construct specific tests from the common template.
+
+ Most tests follow the same basic pattern, differing only in
+ Direction of the test and optional flags passed to csum."""
+ def f(cfg):
+ if ipv4:
+ cfg.require_v4()
+ else:
+ cfg.require_v6()
+
+ if tx:
+ test_transmit(cfg, ipv4, extra_args)
+ else:
+ test_receive(cfg, ipv4, extra_args)
+
+ if ipv4:
+ f.__name__ = "ipv4_" + name
+ else:
+ f.__name__ = "ipv6_" + name
+ return f
+
+
+def check_nic_features(cfg) -> None:
+ """Test whether Tx and Rx checksum offload are enabled.
+
+ If the device under test has either off, then skip the relevant tests."""
+ cfg.have_tx_csum_generic = False
+ cfg.have_tx_csum_ipv4 = False
+ cfg.have_tx_csum_ipv6 = False
+ cfg.have_rx_csum = False
+
+ ethnl = EthtoolFamily()
+ features = ethnl.features_get({"header": {"dev-index": cfg.ifindex}})
+ for f in features["active"]["bits"]["bit"]:
+ if f["name"] == "tx-checksum-ip-generic":
+ cfg.have_tx_csum_generic = True
+ elif f["name"] == "tx-checksum-ipv4":
+ cfg.have_tx_csum_ipv4 = True
+ elif f["name"] == "tx-checksum-ipv6":
+ cfg.have_tx_csum_ipv6 = True
+ elif f["name"] == "rx-checksum":
+ cfg.have_rx_csum = True
+
+
+def main() -> None:
+ with NetDrvEpEnv(__file__, nsim_test=False) as cfg:
+ check_nic_features(cfg)
+
+ cfg.bin_local = path.abspath(path.dirname(__file__) + "/../../../net/lib/csum")
+ cfg.bin_remote = cfg.remote.deploy(cfg.bin_local)
+
+ cases = []
+ for ipv4 in [True, False]:
+ cases.append(test_builder("rx_tcp", cfg, ipv4, False, "-t"))
+ cases.append(test_builder("rx_tcp_invalid", cfg, ipv4, False, "-t -E"))
+
+ cases.append(test_builder("rx_udp", cfg, ipv4, False, ""))
+ cases.append(test_builder("rx_udp_invalid", cfg, ipv4, False, "-E"))
+
+ cases.append(test_builder("tx_udp_csum_offload", cfg, ipv4, True, "-U"))
+ cases.append(test_builder("tx_udp_zero_checksum", cfg, ipv4, True, "-U -Z"))
+
+ ksft_run(cases=cases, args=(cfg, ))
+ ksft_exit()
+
+
+if __name__ == "__main__":
+ main()
diff --git a/tools/testing/selftests/drivers/net/hw/devlink_port_split.py b/tools/testing/selftests/drivers/net/hw/devlink_port_split.py
new file mode 100755
index 0000000000..2d84c7a0be
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/hw/devlink_port_split.py
@@ -0,0 +1,309 @@
+#!/usr/bin/env python3
+# SPDX-License-Identifier: GPL-2.0
+
+from subprocess import PIPE, Popen
+import json
+import time
+import argparse
+import collections
+import sys
+
+#
+# Test port split configuration using devlink-port lanes attribute.
+# The test is skipped in case the attribute is not available.
+#
+# First, check that all the ports with 1 lane fail to split.
+# Second, check that all the ports with more than 1 lane can be split
+# to all valid configurations (e.g., split to 2, split to 4 etc.)
+#
+
+
+# Kselftest framework requirement - SKIP code is 4
+KSFT_SKIP=4
+Port = collections.namedtuple('Port', 'bus_info name')
+
+
+def run_command(cmd, should_fail=False):
+ """
+ Run a command in subprocess.
+ Return: Tuple of (stdout, stderr).
+ """
+
+ p = Popen(cmd, stdout=PIPE, stderr=PIPE, shell=True)
+ stdout, stderr = p.communicate()
+ stdout, stderr = stdout.decode(), stderr.decode()
+
+ if stderr != "" and not should_fail:
+ print("Error sending command: %s" % cmd)
+ print(stdout)
+ print(stderr)
+ return stdout, stderr
+
+
+class devlink_ports(object):
+ """
+ Class that holds information on the devlink ports, required to the tests;
+ if_names: A list of interfaces in the devlink ports.
+ """
+
+ def get_if_names(dev):
+ """
+ Get a list of physical devlink ports.
+ Return: Array of tuples (bus_info/port, if_name).
+ """
+
+ arr = []
+
+ cmd = "devlink -j port show"
+ stdout, stderr = run_command(cmd)
+ assert stderr == ""
+ ports = json.loads(stdout)['port']
+
+ validate_devlink_output(ports, 'flavour')
+
+ for port in ports:
+ if dev in port:
+ if ports[port]['flavour'] == 'physical':
+ arr.append(Port(bus_info=port, name=ports[port]['netdev']))
+
+ return arr
+
+ def __init__(self, dev):
+ self.if_names = devlink_ports.get_if_names(dev)
+
+
+def get_max_lanes(port):
+ """
+ Get the $port's maximum number of lanes.
+ Return: number of lanes, e.g. 1, 2, 4 and 8.
+ """
+
+ cmd = "devlink -j port show %s" % port
+ stdout, stderr = run_command(cmd)
+ assert stderr == ""
+ values = list(json.loads(stdout)['port'].values())[0]
+
+ if 'lanes' in values:
+ lanes = values['lanes']
+ else:
+ lanes = 0
+ return lanes
+
+
+def get_split_ability(port):
+ """
+ Get the $port split ability.
+ Return: split ability, true or false.
+ """
+
+ cmd = "devlink -j port show %s" % port.name
+ stdout, stderr = run_command(cmd)
+ assert stderr == ""
+ values = list(json.loads(stdout)['port'].values())[0]
+
+ return values['splittable']
+
+
+def split(k, port, should_fail=False):
+ """
+ Split $port into $k ports.
+ If should_fail == True, the split should fail. Otherwise, should pass.
+ Return: Array of sub ports after splitting.
+ If the $port wasn't split, the array will be empty.
+ """
+
+ cmd = "devlink port split %s count %s" % (port.bus_info, k)
+ stdout, stderr = run_command(cmd, should_fail=should_fail)
+
+ if should_fail:
+ if not test(stderr != "", "%s is unsplittable" % port.name):
+ print("split an unsplittable port %s" % port.name)
+ return create_split_group(port, k)
+ else:
+ if stderr == "":
+ return create_split_group(port, k)
+ print("didn't split a splittable port %s" % port.name)
+
+ return []
+
+
+def unsplit(port):
+ """
+ Unsplit $port.
+ """
+
+ cmd = "devlink port unsplit %s" % port
+ stdout, stderr = run_command(cmd)
+ test(stderr == "", "Unsplit port %s" % port)
+
+
+def exists(port, dev):
+ """
+ Check if $port exists in the devlink ports.
+ Return: True is so, False otherwise.
+ """
+
+ return any(dev_port.name == port
+ for dev_port in devlink_ports.get_if_names(dev))
+
+
+def exists_and_lanes(ports, lanes, dev):
+ """
+ Check if every port in the list $ports exists in the devlink ports and has
+ $lanes number of lanes after splitting.
+ Return: True if both are True, False otherwise.
+ """
+
+ for port in ports:
+ max_lanes = get_max_lanes(port)
+ if not exists(port, dev):
+ print("port %s doesn't exist in devlink ports" % port)
+ return False
+ if max_lanes != lanes:
+ print("port %s has %d lanes, but %s were expected"
+ % (port, lanes, max_lanes))
+ return False
+ return True
+
+
+def test(cond, msg):
+ """
+ Check $cond and print a message accordingly.
+ Return: True is pass, False otherwise.
+ """
+
+ if cond:
+ print("TEST: %-60s [ OK ]" % msg)
+ else:
+ print("TEST: %-60s [FAIL]" % msg)
+
+ return cond
+
+
+def create_split_group(port, k):
+ """
+ Create the split group for $port.
+ Return: Array with $k elements, which are the split port group.
+ """
+
+ return list(port.name + "s" + str(i) for i in range(k))
+
+
+def split_unsplittable_port(port, k):
+ """
+ Test that splitting of unsplittable port fails.
+ """
+
+ # split to max
+ new_split_group = split(k, port, should_fail=True)
+
+ if new_split_group != []:
+ unsplit(port.bus_info)
+
+
+def split_splittable_port(port, k, lanes, dev):
+ """
+ Test that splitting of splittable port passes correctly.
+ """
+
+ new_split_group = split(k, port)
+
+ # Once the split command ends, it takes some time to the sub ifaces'
+ # to get their names. Use udevadm to continue only when all current udev
+ # events are handled.
+ cmd = "udevadm settle"
+ stdout, stderr = run_command(cmd)
+ assert stderr == ""
+
+ if new_split_group != []:
+ test(exists_and_lanes(new_split_group, lanes/k, dev),
+ "split port %s into %s" % (port.name, k))
+
+ unsplit(port.bus_info)
+
+
+def validate_devlink_output(devlink_data, target_property=None):
+ """
+ Determine if test should be skipped by checking:
+ 1. devlink_data contains values
+ 2. The target_property exist in devlink_data
+ """
+ skip_reason = None
+ if any(devlink_data.values()):
+ if target_property:
+ skip_reason = "{} not found in devlink output, test skipped".format(target_property)
+ for key in devlink_data:
+ if target_property in devlink_data[key]:
+ skip_reason = None
+ else:
+ skip_reason = 'devlink output is empty, test skipped'
+
+ if skip_reason:
+ print(skip_reason)
+ sys.exit(KSFT_SKIP)
+
+
+def make_parser():
+ parser = argparse.ArgumentParser(description='A test for port splitting.')
+ parser.add_argument('--dev',
+ help='The devlink handle of the device under test. ' +
+ 'The default is the first registered devlink ' +
+ 'handle.')
+
+ return parser
+
+
+def main(cmdline=None):
+ parser = make_parser()
+ args = parser.parse_args(cmdline)
+
+ dev = args.dev
+ if not dev:
+ cmd = "devlink -j dev show"
+ stdout, stderr = run_command(cmd)
+ assert stderr == ""
+
+ validate_devlink_output(json.loads(stdout))
+ devs = json.loads(stdout)['dev']
+ dev = list(devs.keys())[0]
+
+ cmd = "devlink dev show %s" % dev
+ stdout, stderr = run_command(cmd)
+ if stderr != "":
+ print("devlink device %s can not be found" % dev)
+ sys.exit(1)
+
+ ports = devlink_ports(dev)
+
+ found_max_lanes = False
+ for port in ports.if_names:
+ max_lanes = get_max_lanes(port.name)
+
+ # If max lanes is 0, do not test port splitting at all
+ if max_lanes == 0:
+ continue
+
+ # If 1 lane, shouldn't be able to split
+ elif max_lanes == 1:
+ test(not get_split_ability(port),
+ "%s should not be able to split" % port.name)
+ split_unsplittable_port(port, max_lanes)
+
+ # Else, splitting should pass and all the split ports should exist.
+ else:
+ lane = max_lanes
+ test(get_split_ability(port),
+ "%s should be able to split" % port.name)
+ while lane > 1:
+ split_splittable_port(port, lane, max_lanes, dev)
+
+ lane //= 2
+ found_max_lanes = True
+
+ if not found_max_lanes:
+ print(f"Test not started, no port of device {dev} reports max_lanes")
+ sys.exit(KSFT_SKIP)
+
+
+if __name__ == "__main__":
+ main()
diff --git a/tools/testing/selftests/drivers/net/hw/ethtool.sh b/tools/testing/selftests/drivers/net/hw/ethtool.sh
new file mode 100755
index 0000000000..fa6953de6b
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/hw/ethtool.sh
@@ -0,0 +1,297 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+ same_speeds_autoneg_off
+ different_speeds_autoneg_off
+ combination_of_neg_on_and_off
+ advertise_subset_of_speeds
+ check_highest_speed_is_chosen
+ different_speeds_autoneg_on
+"
+NUM_NETIFS=2
+lib_dir=$(dirname "$0")
+source "$lib_dir"/../../../net/forwarding/lib.sh
+source ethtool_lib.sh
+
+h1_create()
+{
+ simple_if_init $h1 192.0.2.1/24
+}
+
+h1_destroy()
+{
+ simple_if_fini $h1 192.0.2.1/24
+}
+
+h2_create()
+{
+ simple_if_init $h2 192.0.2.2/24
+}
+
+h2_destroy()
+{
+ simple_if_fini $h2 192.0.2.2/24
+}
+
+setup_prepare()
+{
+ h1=${NETIFS[p1]}
+ h2=${NETIFS[p2]}
+
+ h1_create
+ h2_create
+}
+
+cleanup()
+{
+ pre_cleanup
+
+ h2_destroy
+ h1_destroy
+}
+
+same_speeds_autoneg_off()
+{
+ # Check that when each of the reported speeds is forced, the links come
+ # up and are operational.
+ local -a speeds_arr=($(common_speeds_get $h1 $h2 0 0))
+
+ for speed in "${speeds_arr[@]}"; do
+ RET=0
+ ethtool_set $h1 speed $speed autoneg off
+ ethtool_set $h2 speed $speed autoneg off
+
+ setup_wait_dev_with_timeout $h1
+ setup_wait_dev_with_timeout $h2
+ ping_do $h1 192.0.2.2
+ check_err $? "ping with speed $speed autoneg off"
+ log_test "force speed $speed on both ends"
+ done
+
+ ethtool -s $h2 autoneg on
+ ethtool -s $h1 autoneg on
+}
+
+different_speeds_autoneg_off()
+{
+ # Test that when we force different speeds, links are not up and ping
+ # fails.
+ RET=0
+
+ local -a speeds_arr=($(different_speeds_get $h1 $h2 0 0))
+ local speed1=${speeds_arr[0]}
+ local speed2=${speeds_arr[1]}
+
+ ethtool_set $h1 speed $speed1 autoneg off
+ ethtool_set $h2 speed $speed2 autoneg off
+
+ setup_wait_dev_with_timeout $h1
+ setup_wait_dev_with_timeout $h2
+ ping_do $h1 192.0.2.2
+ check_fail $? "ping with different speeds"
+
+ log_test "force of different speeds autoneg off"
+
+ ethtool -s $h2 autoneg on
+ ethtool -s $h1 autoneg on
+}
+
+combination_of_neg_on_and_off()
+{
+ # Test that when one device is forced to a speed supported by both
+ # endpoints and the other device is configured to autoneg on, the links
+ # are up and ping passes.
+ local -a speeds_arr=($(common_speeds_get $h1 $h2 0 1))
+
+ for speed in "${speeds_arr[@]}"; do
+ RET=0
+ ethtool_set $h1 speed $speed autoneg off
+
+ setup_wait_dev_with_timeout $h1
+ setup_wait_dev_with_timeout $h2
+ ping_do $h1 192.0.2.2
+ check_err $? "ping with h1-speed=$speed autoneg off, h2 autoneg on"
+ log_test "force speed $speed vs. autoneg"
+ done
+
+ ethtool -s $h1 autoneg on
+}
+
+hex_speed_value_get()
+{
+ local speed=$1; shift
+
+ local shift_size=${speed_values[$speed]}
+ speed=$((0x1 << $"shift_size"))
+ printf "%#x" "$speed"
+}
+
+subset_of_common_speeds_get()
+{
+ local dev1=$1; shift
+ local dev2=$1; shift
+ local adver=$1; shift
+
+ local -a speeds_arr=($(common_speeds_get $dev1 $dev2 0 $adver))
+ local speed_to_advertise=0
+ local speed_to_remove=${speeds_arr[0]}
+ speed_to_remove+='base'
+
+ local -a speeds_mode_arr=($(common_speeds_get $dev1 $dev2 1 $adver))
+
+ for speed in ${speeds_mode_arr[@]}; do
+ if [[ $speed != $speed_to_remove* ]]; then
+ speed=$(hex_speed_value_get $speed)
+ speed_to_advertise=$(($speed_to_advertise | \
+ $speed))
+ fi
+
+ done
+
+ # Convert to hex.
+ printf "%#x" "$speed_to_advertise"
+}
+
+speed_to_advertise_get()
+{
+ # The function returns the hex number that is composed by OR-ing all
+ # the modes corresponding to the provided speed.
+ local speed_without_mode=$1; shift
+ local supported_speeds=("$@"); shift
+ local speed_to_advertise=0
+
+ speed_without_mode+='base'
+
+ for speed in ${supported_speeds[@]}; do
+ if [[ $speed == $speed_without_mode* ]]; then
+ speed=$(hex_speed_value_get $speed)
+ speed_to_advertise=$(($speed_to_advertise | \
+ $speed))
+ fi
+
+ done
+
+ # Convert to hex.
+ printf "%#x" "$speed_to_advertise"
+}
+
+advertise_subset_of_speeds()
+{
+ # Test that when one device advertises a subset of speeds and another
+ # advertises a specific speed (but all modes of this speed), the links
+ # are up and ping passes.
+ RET=0
+
+ local speed_1_to_advertise=$(subset_of_common_speeds_get $h1 $h2 1)
+ ethtool_set $h1 advertise $speed_1_to_advertise
+
+ if [ $RET != 0 ]; then
+ log_test "advertise subset of speeds"
+ return
+ fi
+
+ local -a speeds_arr_without_mode=($(common_speeds_get $h1 $h2 0 1))
+ # Check only speeds that h1 advertised. Remove the first speed.
+ unset speeds_arr_without_mode[0]
+ local -a speeds_arr_with_mode=($(common_speeds_get $h1 $h2 1 1))
+
+ for speed_value in ${speeds_arr_without_mode[@]}; do
+ RET=0
+ local speed_2_to_advertise=$(speed_to_advertise_get $speed_value \
+ "${speeds_arr_with_mode[@]}")
+ ethtool_set $h2 advertise $speed_2_to_advertise
+
+ setup_wait_dev_with_timeout $h1
+ setup_wait_dev_with_timeout $h2
+ ping_do $h1 192.0.2.2
+ check_err $? "ping with h1=$speed_1_to_advertise, h2=$speed_2_to_advertise ($speed_value)"
+
+ log_test "advertise $speed_1_to_advertise vs. $speed_2_to_advertise"
+ done
+
+ ethtool -s $h2 autoneg on
+ ethtool -s $h1 autoneg on
+}
+
+check_highest_speed_is_chosen()
+{
+ # Test that when one device advertises a subset of speeds, the other
+ # chooses the highest speed. This test checks configuration without
+ # traffic.
+ RET=0
+
+ local max_speed
+ local chosen_speed
+ local speed_to_advertise=$(subset_of_common_speeds_get $h1 $h2 1)
+
+ ethtool_set $h1 advertise $speed_to_advertise
+
+ if [ $RET != 0 ]; then
+ log_test "check highest speed"
+ return
+ fi
+
+ local -a speeds_arr=($(common_speeds_get $h1 $h2 0 1))
+
+ max_speed=${speeds_arr[0]}
+ for current in ${speeds_arr[@]}; do
+ if [[ $current -gt $max_speed ]]; then
+ max_speed=$current
+ fi
+ done
+
+ setup_wait_dev_with_timeout $h1
+ setup_wait_dev_with_timeout $h2
+ chosen_speed=$(ethtool $h1 | grep 'Speed:')
+ chosen_speed=${chosen_speed%"Mb/s"*}
+ chosen_speed=${chosen_speed#*"Speed: "}
+ ((chosen_speed == max_speed))
+ check_err $? "h1 advertise $speed_to_advertise, h2 sync to speed $chosen_speed"
+
+ log_test "check highest speed"
+
+ ethtool -s $h2 autoneg on
+ ethtool -s $h1 autoneg on
+}
+
+different_speeds_autoneg_on()
+{
+ # Test that when we configure links to advertise different speeds,
+ # links are not up and ping fails.
+ RET=0
+
+ local -a speeds=($(different_speeds_get $h1 $h2 1 1))
+ local speed1=${speeds[0]}
+ local speed2=${speeds[1]}
+
+ speed1=$(hex_speed_value_get $speed1)
+ speed2=$(hex_speed_value_get $speed2)
+
+ ethtool_set $h1 advertise $speed1
+ ethtool_set $h2 advertise $speed2
+
+ if (($RET)); then
+ setup_wait_dev_with_timeout $h1
+ setup_wait_dev_with_timeout $h2
+ ping_do $h1 192.0.2.2
+ check_fail $? "ping with different speeds autoneg on"
+ fi
+
+ log_test "advertise different speeds autoneg on"
+
+ ethtool -s $h2 autoneg on
+ ethtool -s $h1 autoneg on
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+declare -gA speed_values
+eval "speed_values=($(speeds_arr_get))"
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/hw/ethtool_extended_state.sh b/tools/testing/selftests/drivers/net/hw/ethtool_extended_state.sh
new file mode 100755
index 0000000000..a758444841
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/hw/ethtool_extended_state.sh
@@ -0,0 +1,116 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+ autoneg
+ autoneg_force_mode
+ no_cable
+"
+
+NUM_NETIFS=2
+lib_dir=$(dirname "$0")
+source "$lib_dir"/../../../net/forwarding/lib.sh
+source ethtool_lib.sh
+
+TIMEOUT=$((WAIT_TIMEOUT * 1000)) # ms
+
+setup_prepare()
+{
+ swp1=${NETIFS[p1]}
+ swp2=${NETIFS[p2]}
+ swp3=$NETIF_NO_CABLE
+}
+
+ethtool_ext_state()
+{
+ local dev=$1; shift
+ local expected_ext_state=$1; shift
+ local expected_ext_substate=${1:-""}; shift
+
+ local ext_state=$(ethtool $dev | grep "Link detected" \
+ | cut -d "(" -f2 | cut -d ")" -f1)
+ local ext_substate=$(echo $ext_state | cut -sd "," -f2 \
+ | sed -e 's/^[[:space:]]*//')
+ ext_state=$(echo $ext_state | cut -d "," -f1)
+
+ if [[ $ext_state != $expected_ext_state ]]; then
+ echo "Expected \"$expected_ext_state\", got \"$ext_state\""
+ return 1
+ fi
+ if [[ $ext_substate != $expected_ext_substate ]]; then
+ echo "Expected \"$expected_ext_substate\", got \"$ext_substate\""
+ return 1
+ fi
+}
+
+autoneg()
+{
+ local msg
+
+ RET=0
+
+ ip link set dev $swp1 up
+
+ msg=$(busywait $TIMEOUT ethtool_ext_state $swp1 \
+ "Autoneg" "No partner detected")
+ check_err $? "$msg"
+
+ log_test "Autoneg, No partner detected"
+
+ ip link set dev $swp1 down
+}
+
+autoneg_force_mode()
+{
+ local msg
+
+ RET=0
+
+ ip link set dev $swp1 up
+ ip link set dev $swp2 up
+
+ local -a speeds_arr=($(different_speeds_get $swp1 $swp2 0 0))
+ local speed1=${speeds_arr[0]}
+ local speed2=${speeds_arr[1]}
+
+ ethtool_set $swp1 speed $speed1 autoneg off
+ ethtool_set $swp2 speed $speed2 autoneg off
+
+ msg=$(busywait $TIMEOUT ethtool_ext_state $swp1 \
+ "Autoneg" "No partner detected during force mode")
+ check_err $? "$msg"
+
+ msg=$(busywait $TIMEOUT ethtool_ext_state $swp2 \
+ "Autoneg" "No partner detected during force mode")
+ check_err $? "$msg"
+
+ log_test "Autoneg, No partner detected during force mode"
+
+ ethtool -s $swp2 autoneg on
+ ethtool -s $swp1 autoneg on
+
+ ip link set dev $swp2 down
+ ip link set dev $swp1 down
+}
+
+no_cable()
+{
+ local msg
+
+ RET=0
+
+ ip link set dev $swp3 up
+
+ msg=$(busywait $TIMEOUT ethtool_ext_state $swp3 "No cable")
+ check_err $? "$msg"
+
+ log_test "No cable"
+
+ ip link set dev $swp3 down
+}
+
+setup_prepare
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/hw/ethtool_lib.sh b/tools/testing/selftests/drivers/net/hw/ethtool_lib.sh
new file mode 100644
index 0000000000..b9bfb45085
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/hw/ethtool_lib.sh
@@ -0,0 +1,120 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+speeds_arr_get()
+{
+ cmd='/ETHTOOL_LINK_MODE_[^[:space:]]*_BIT[[:space:]]+=[[:space:]]+/ \
+ {sub(/,$/, "") \
+ sub(/ETHTOOL_LINK_MODE_/,"") \
+ sub(/_BIT/,"") \
+ sub(/_Full/,"/Full") \
+ sub(/_Half/,"/Half");\
+ print "["$1"]="$3}'
+
+ awk "${cmd}" /usr/include/linux/ethtool.h
+}
+
+ethtool_set()
+{
+ local cmd="$@"
+ local out=$(ethtool -s $cmd 2>&1 | wc -l)
+
+ check_err $out "error in configuration. $cmd"
+}
+
+dev_linkmodes_params_get()
+{
+ local dev=$1; shift
+ local adver=$1; shift
+ local -a linkmodes_params
+ local param_count
+ local arr
+
+ if (($adver)); then
+ mode="Advertised link modes"
+ else
+ mode="Supported link modes"
+ fi
+
+ local -a dev_linkmodes=($(dev_speeds_get $dev 1 $adver))
+ for ((i=0; i<${#dev_linkmodes[@]}; i++)); do
+ linkmodes_params[$i]=$(echo -e "${dev_linkmodes[$i]}" | \
+ # Replaces all non numbers with spaces
+ sed -e 's/[^0-9]/ /g' | \
+ # Squeeze spaces in sequence to 1 space
+ tr -s ' ')
+ # Count how many numbers were found in the linkmode
+ param_count=$(echo "${linkmodes_params[$i]}" | wc -w)
+ if [[ $param_count -eq 1 ]]; then
+ linkmodes_params[$i]="${linkmodes_params[$i]} 1"
+ elif [[ $param_count -ge 3 ]]; then
+ arr=(${linkmodes_params[$i]})
+ # Take only first two params
+ linkmodes_params[$i]=$(echo "${arr[@]:0:2}")
+ fi
+ done
+ echo ${linkmodes_params[@]}
+}
+
+dev_speeds_get()
+{
+ local dev=$1; shift
+ local with_mode=$1; shift
+ local adver=$1; shift
+ local speeds_str
+
+ if (($adver)); then
+ mode="Advertised link modes"
+ else
+ mode="Supported link modes"
+ fi
+
+ speeds_str=$(ethtool "$dev" | \
+ # Snip everything before the link modes section.
+ sed -n '/'"$mode"':/,$p' | \
+ # Quit processing the rest at the start of the next section.
+ # When checking, skip the header of this section (hence the 2,).
+ sed -n '2,${/^[\t][^ \t]/q};p' | \
+ # Drop the section header of the current section.
+ cut -d':' -f2)
+
+ local -a speeds_arr=($speeds_str)
+ if [[ $with_mode -eq 0 ]]; then
+ for ((i=0; i<${#speeds_arr[@]}; i++)); do
+ speeds_arr[$i]=${speeds_arr[$i]%base*}
+ done
+ fi
+ echo ${speeds_arr[@]}
+}
+
+common_speeds_get()
+{
+ dev1=$1; shift
+ dev2=$1; shift
+ with_mode=$1; shift
+ adver=$1; shift
+
+ local -a dev1_speeds=($(dev_speeds_get $dev1 $with_mode $adver))
+ local -a dev2_speeds=($(dev_speeds_get $dev2 $with_mode $adver))
+
+ comm -12 \
+ <(printf '%s\n' "${dev1_speeds[@]}" | sort -u) \
+ <(printf '%s\n' "${dev2_speeds[@]}" | sort -u)
+}
+
+different_speeds_get()
+{
+ local dev1=$1; shift
+ local dev2=$1; shift
+ local with_mode=$1; shift
+ local adver=$1; shift
+
+ local -a speeds_arr
+
+ speeds_arr=($(common_speeds_get $dev1 $dev2 $with_mode $adver))
+ if [[ ${#speeds_arr[@]} < 2 ]]; then
+ check_err 1 "cannot check different speeds. There are not enough speeds"
+ fi
+
+ echo ${speeds_arr[0]} ${speeds_arr[1]}
+}
diff --git a/tools/testing/selftests/drivers/net/hw/ethtool_mm.sh b/tools/testing/selftests/drivers/net/hw/ethtool_mm.sh
new file mode 100755
index 0000000000..c301e735c8
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/hw/ethtool_mm.sh
@@ -0,0 +1,341 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+ manual_with_verification_h1_to_h2
+ manual_with_verification_h2_to_h1
+ manual_without_verification_h1_to_h2
+ manual_without_verification_h2_to_h1
+ manual_failed_verification_h1_to_h2
+ manual_failed_verification_h2_to_h1
+ lldp
+"
+
+NUM_NETIFS=2
+REQUIRE_MZ=no
+PREEMPTIBLE_PRIO=0
+lib_dir=$(dirname "$0")
+source "$lib_dir"/../../../net/forwarding/lib.sh
+
+traffic_test()
+{
+ local if=$1; shift
+ local src=$1; shift
+ local num_pkts=10000
+ local before=
+ local after=
+ local delta=
+
+ if [ ${has_pmac_stats[$if]} = false ]; then
+ src="aggregate"
+ fi
+
+ before=$(ethtool_std_stats_get $if "eth-mac" "FramesTransmittedOK" $src)
+
+ $MZ $if -q -c $num_pkts -p 64 -b bcast -t ip -R $PREEMPTIBLE_PRIO
+
+ after=$(ethtool_std_stats_get $if "eth-mac" "FramesTransmittedOK" $src)
+
+ delta=$((after - before))
+
+ # Allow an extra 1% tolerance for random packets sent by the stack
+ [ $delta -ge $num_pkts ] && [ $delta -le $((num_pkts + 100)) ]
+}
+
+manual_with_verification()
+{
+ local tx=$1; shift
+ local rx=$1; shift
+
+ RET=0
+
+ # It isn't completely clear from IEEE 802.3-2018 Figure 99-5: Transmit
+ # Processing state diagram whether the "send_r" variable (send response
+ # to verification frame) should be taken into consideration while the
+ # MAC Merge TX direction is disabled. That being said, at least the
+ # NXP ENETC does not, and requires tx-enabled on in order to respond to
+ # the link partner's verification frames.
+ ethtool --set-mm $rx tx-enabled on
+ ethtool --set-mm $tx verify-enabled on tx-enabled on
+
+ # Wait for verification to finish
+ sleep 1
+
+ ethtool --json --show-mm $tx | jq -r '.[]."verify-status"' | \
+ grep -q 'SUCCEEDED'
+ check_err "$?" "Verification did not succeed"
+
+ ethtool --json --show-mm $tx | jq -r '.[]."tx-active"' | grep -q 'true'
+ check_err "$?" "pMAC TX is not active"
+
+ traffic_test $tx "pmac"
+ check_err "$?" "Traffic did not get sent through $tx's pMAC"
+
+ ethtool --set-mm $tx verify-enabled off tx-enabled off
+ ethtool --set-mm $rx tx-enabled off
+
+ log_test "Manual configuration with verification: $tx to $rx"
+}
+
+manual_with_verification_h1_to_h2()
+{
+ manual_with_verification $h1 $h2
+}
+
+manual_with_verification_h2_to_h1()
+{
+ manual_with_verification $h2 $h1
+}
+
+manual_without_verification()
+{
+ local tx=$1; shift
+ local rx=$1; shift
+
+ RET=0
+
+ ethtool --set-mm $tx verify-enabled off tx-enabled on
+
+ ethtool --json --show-mm $tx | jq -r '.[]."verify-status"' | \
+ grep -q 'DISABLED'
+ check_err "$?" "Verification is not disabled"
+
+ ethtool --json --show-mm $tx | jq -r '.[]."tx-active"' | grep -q 'true'
+ check_err "$?" "pMAC TX is not active"
+
+ traffic_test $tx "pmac"
+ check_err "$?" "Traffic did not get sent through $tx's pMAC"
+
+ ethtool --set-mm $tx verify-enabled off tx-enabled off
+
+ log_test "Manual configuration without verification: $tx to $rx"
+}
+
+manual_without_verification_h1_to_h2()
+{
+ manual_without_verification $h1 $h2
+}
+
+manual_without_verification_h2_to_h1()
+{
+ manual_without_verification $h2 $h1
+}
+
+manual_failed_verification()
+{
+ local tx=$1; shift
+ local rx=$1; shift
+
+ RET=0
+
+ ethtool --set-mm $rx pmac-enabled off
+ ethtool --set-mm $tx verify-enabled on tx-enabled on
+
+ # Wait for verification to time out
+ sleep 1
+
+ ethtool --json --show-mm $tx | jq -r '.[]."verify-status"' | \
+ grep -q 'SUCCEEDED'
+ check_fail "$?" "Verification succeeded when it shouldn't have"
+
+ ethtool --json --show-mm $tx | jq -r '.[]."tx-active"' | grep -q 'true'
+ check_fail "$?" "pMAC TX is active when it shouldn't have"
+
+ traffic_test $tx "emac"
+ check_err "$?" "Traffic did not get sent through $tx's eMAC"
+
+ ethtool --set-mm $tx verify-enabled off tx-enabled off
+ ethtool --set-mm $rx pmac-enabled on
+
+ log_test "Manual configuration with failed verification: $tx to $rx"
+}
+
+manual_failed_verification_h1_to_h2()
+{
+ manual_failed_verification $h1 $h2
+}
+
+manual_failed_verification_h2_to_h1()
+{
+ manual_failed_verification $h2 $h1
+}
+
+smallest_supported_add_frag_size()
+{
+ local iface=$1
+ local rx_min_frag_size=
+
+ rx_min_frag_size=$(ethtool --json --show-mm $iface | \
+ jq '.[]."rx-min-frag-size"')
+
+ if [ $rx_min_frag_size -le 60 ]; then
+ echo 0
+ elif [ $rx_min_frag_size -le 124 ]; then
+ echo 1
+ elif [ $rx_min_frag_size -le 188 ]; then
+ echo 2
+ elif [ $rx_min_frag_size -le 252 ]; then
+ echo 3
+ else
+ echo "$iface: RX min frag size $rx_min_frag_size cannot be advertised over LLDP"
+ exit 1
+ fi
+}
+
+expected_add_frag_size()
+{
+ local iface=$1
+ local requested=$2
+ local min=$(smallest_supported_add_frag_size $iface)
+
+ [ $requested -le $min ] && echo $min || echo $requested
+}
+
+lldp_change_add_frag_size()
+{
+ local add_frag_size=$1
+ local pattern=
+
+ lldptool -T -i $h1 -V addEthCaps addFragSize=$add_frag_size >/dev/null
+ # Wait for TLVs to be received
+ sleep 2
+ pattern=$(printf "Additional fragment size: %d" \
+ $(expected_add_frag_size $h1 $add_frag_size))
+ lldptool -i $h2 -t -n -V addEthCaps | grep -q "$pattern"
+}
+
+lldp()
+{
+ RET=0
+
+ systemctl start lldpad
+
+ # Configure the interfaces to receive and transmit LLDPDUs
+ lldptool -L -i $h1 adminStatus=rxtx >/dev/null
+ lldptool -L -i $h2 adminStatus=rxtx >/dev/null
+
+ # Enable the transmission of Additional Ethernet Capabilities TLV
+ lldptool -T -i $h1 -V addEthCaps enableTx=yes >/dev/null
+ lldptool -T -i $h2 -V addEthCaps enableTx=yes >/dev/null
+
+ # Wait for TLVs to be received
+ sleep 2
+
+ lldptool -i $h1 -t -n -V addEthCaps | \
+ grep -q "Preemption capability active"
+ check_err "$?" "$h1 pMAC TX is not active"
+
+ lldptool -i $h2 -t -n -V addEthCaps | \
+ grep -q "Preemption capability active"
+ check_err "$?" "$h2 pMAC TX is not active"
+
+ lldp_change_add_frag_size 3
+ check_err "$?" "addFragSize 3"
+
+ lldp_change_add_frag_size 2
+ check_err "$?" "addFragSize 2"
+
+ lldp_change_add_frag_size 1
+ check_err "$?" "addFragSize 1"
+
+ lldp_change_add_frag_size 0
+ check_err "$?" "addFragSize 0"
+
+ traffic_test $h1 "pmac"
+ check_err "$?" "Traffic did not get sent through $h1's pMAC"
+
+ traffic_test $h2 "pmac"
+ check_err "$?" "Traffic did not get sent through $h2's pMAC"
+
+ systemctl stop lldpad
+
+ log_test "LLDP"
+}
+
+h1_create()
+{
+ ip link set dev $h1 up
+
+ tc qdisc add dev $h1 root mqprio num_tc 4 map 0 1 2 3 \
+ queues 1@0 1@1 1@2 1@3 \
+ fp P E E E \
+ hw 1
+
+ ethtool --set-mm $h1 pmac-enabled on tx-enabled off verify-enabled off
+}
+
+h2_create()
+{
+ ip link set dev $h2 up
+
+ ethtool --set-mm $h2 pmac-enabled on tx-enabled off verify-enabled off
+
+ tc qdisc add dev $h2 root mqprio num_tc 4 map 0 1 2 3 \
+ queues 1@0 1@1 1@2 1@3 \
+ fp P E E E \
+ hw 1
+}
+
+h1_destroy()
+{
+ ethtool --set-mm $h1 pmac-enabled off tx-enabled off verify-enabled off
+
+ tc qdisc del dev $h1 root
+
+ ip link set dev $h1 down
+}
+
+h2_destroy()
+{
+ tc qdisc del dev $h2 root
+
+ ethtool --set-mm $h2 pmac-enabled off tx-enabled off verify-enabled off
+
+ ip link set dev $h2 down
+}
+
+setup_prepare()
+{
+ h1=${NETIFS[p1]}
+ h2=${NETIFS[p2]}
+
+ h1_create
+ h2_create
+}
+
+cleanup()
+{
+ pre_cleanup
+
+ h2_destroy
+ h1_destroy
+}
+
+check_ethtool_mm_support
+check_tc_fp_support
+require_command lldptool
+bail_on_lldpad "autoconfigure the MAC Merge layer" "configure it manually"
+
+for netif in ${NETIFS[@]}; do
+ ethtool --show-mm $netif 2>&1 &> /dev/null
+ if [[ $? -ne 0 ]]; then
+ echo "SKIP: $netif does not support MAC Merge"
+ exit $ksft_skip
+ fi
+
+ if check_ethtool_pmac_std_stats_support $netif eth-mac; then
+ has_pmac_stats[$netif]=true
+ else
+ has_pmac_stats[$netif]=false
+ echo "$netif does not report pMAC statistics, falling back to aggregate"
+ fi
+done
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/hw/ethtool_rmon.sh b/tools/testing/selftests/drivers/net/hw/ethtool_rmon.sh
new file mode 100755
index 0000000000..8f60c1685a
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/hw/ethtool_rmon.sh
@@ -0,0 +1,145 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+ rmon_rx_histogram
+ rmon_tx_histogram
+"
+
+NUM_NETIFS=2
+lib_dir=$(dirname "$0")
+source "$lib_dir"/../../../net/forwarding/lib.sh
+
+ETH_FCS_LEN=4
+ETH_HLEN=$((6+6+2))
+
+declare -A netif_mtu
+
+ensure_mtu()
+{
+ local iface=$1; shift
+ local len=$1; shift
+ local current=$(ip -j link show dev $iface | jq -r '.[0].mtu')
+ local required=$((len - ETH_HLEN - ETH_FCS_LEN))
+
+ if [ $current -lt $required ]; then
+ ip link set dev $iface mtu $required || return 1
+ fi
+}
+
+bucket_test()
+{
+ local iface=$1; shift
+ local neigh=$1; shift
+ local set=$1; shift
+ local bucket=$1; shift
+ local len=$1; shift
+ local num_rx=10000
+ local num_tx=20000
+ local expected=
+ local before=
+ local after=
+ local delta=
+
+ # Mausezahn does not include FCS bytes in its length - but the
+ # histogram counters do
+ len=$((len - ETH_FCS_LEN))
+ len=$((len > 0 ? len : 0))
+
+ before=$(ethtool --json -S $iface --groups rmon | \
+ jq -r ".[0].rmon[\"${set}-pktsNtoM\"][$bucket].val")
+
+ # Send 10k one way and 20k in the other, to detect counters
+ # mapped to the wrong direction
+ $MZ $neigh -q -c $num_rx -p $len -a own -b bcast -d 10us
+ $MZ $iface -q -c $num_tx -p $len -a own -b bcast -d 10us
+
+ after=$(ethtool --json -S $iface --groups rmon | \
+ jq -r ".[0].rmon[\"${set}-pktsNtoM\"][$bucket].val")
+
+ delta=$((after - before))
+
+ expected=$([ $set = rx ] && echo $num_rx || echo $num_tx)
+
+ # Allow some extra tolerance for other packets sent by the stack
+ [ $delta -ge $expected ] && [ $delta -le $((expected + 100)) ]
+}
+
+rmon_histogram()
+{
+ local iface=$1; shift
+ local neigh=$1; shift
+ local set=$1; shift
+ local nbuckets=0
+ local step=
+
+ RET=0
+
+ while read -r -a bucket; do
+ step="$set-pkts${bucket[0]}to${bucket[1]} on $iface"
+
+ for if in $iface $neigh; do
+ if ! ensure_mtu $if ${bucket[0]}; then
+ log_test_xfail "$if does not support the required MTU for $step"
+ return
+ fi
+ done
+
+ if ! bucket_test $iface $neigh $set $nbuckets ${bucket[0]}; then
+ check_err 1 "$step failed"
+ return 1
+ fi
+ log_test "$step"
+ nbuckets=$((nbuckets + 1))
+ done < <(ethtool --json -S $iface --groups rmon | \
+ jq -r ".[0].rmon[\"${set}-pktsNtoM\"][]|[.low, .high]|@tsv" 2>/dev/null)
+
+ if [ $nbuckets -eq 0 ]; then
+ log_test_xfail "$iface does not support $set histogram counters"
+ return
+ fi
+}
+
+rmon_rx_histogram()
+{
+ rmon_histogram $h1 $h2 rx
+ rmon_histogram $h2 $h1 rx
+}
+
+rmon_tx_histogram()
+{
+ rmon_histogram $h1 $h2 tx
+ rmon_histogram $h2 $h1 tx
+}
+
+setup_prepare()
+{
+ h1=${NETIFS[p1]}
+ h2=${NETIFS[p2]}
+
+ for iface in $h1 $h2; do
+ netif_mtu[$iface]=$(ip -j link show dev $iface | jq -r '.[0].mtu')
+ ip link set dev $iface up
+ done
+}
+
+cleanup()
+{
+ pre_cleanup
+
+ for iface in $h2 $h1; do
+ ip link set dev $iface \
+ mtu ${netif_mtu[$iface]} \
+ down
+ done
+}
+
+check_ethtool_counter_group_support
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/hw/hw_stats_l3.sh b/tools/testing/selftests/drivers/net/hw/hw_stats_l3.sh
new file mode 100755
index 0000000000..67fafefc80
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/hw/hw_stats_l3.sh
@@ -0,0 +1,334 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +--------------------+ +----------------------+
+# | H1 | | H2 |
+# | | | |
+# | $h1.200 + | | + $h2.200 |
+# | 192.0.2.1/28 | | | | 192.0.2.18/28 |
+# | 2001:db8:1::1/64 | | | | 2001:db8:2::1/64 |
+# | | | | | |
+# | $h1 + | | + $h2 |
+# | | | | | |
+# +------------------|-+ +-|--------------------+
+# | |
+# +------------------|-------------------------|--------------------+
+# | SW | | |
+# | | | |
+# | $rp1 + + $rp2 |
+# | | | |
+# | $rp1.200 + + $rp2.200 |
+# | 192.0.2.2/28 192.0.2.17/28 |
+# | 2001:db8:1::2/64 2001:db8:2::2/64 |
+# | |
+# +-----------------------------------------------------------------+
+
+ALL_TESTS="
+ ping_ipv4
+ ping_ipv6
+ test_stats_rx_ipv4
+ test_stats_tx_ipv4
+ test_stats_rx_ipv6
+ test_stats_tx_ipv6
+ respin_enablement
+ test_stats_rx_ipv4
+ test_stats_tx_ipv4
+ test_stats_rx_ipv6
+ test_stats_tx_ipv6
+ reapply_config
+ ping_ipv4
+ ping_ipv6
+ test_stats_rx_ipv4
+ test_stats_tx_ipv4
+ test_stats_rx_ipv6
+ test_stats_tx_ipv6
+ test_stats_report_rx
+ test_stats_report_tx
+ test_destroy_enabled
+ test_double_enable
+"
+NUM_NETIFS=4
+lib_dir=$(dirname "$0")
+source "$lib_dir"/../../../net/forwarding/lib.sh
+source "$lib_dir"/../../../net/forwarding/tc_common.sh
+
+h1_create()
+{
+ simple_if_init $h1
+ vlan_create $h1 200 v$h1 192.0.2.1/28 2001:db8:1::1/64
+ ip route add 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2
+ ip -6 route add 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2
+}
+
+h1_destroy()
+{
+ ip -6 route del 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2
+ ip route del 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2
+ vlan_destroy $h1 200
+ simple_if_fini $h1
+}
+
+h2_create()
+{
+ simple_if_init $h2
+ vlan_create $h2 200 v$h2 192.0.2.18/28 2001:db8:2::1/64
+ ip route add 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.17
+ ip -6 route add 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::2
+}
+
+h2_destroy()
+{
+ ip -6 route del 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::2
+ ip route del 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.17
+ vlan_destroy $h2 200
+ simple_if_fini $h2
+}
+
+router_rp1_200_create()
+{
+ ip link add name $rp1.200 link $rp1 type vlan id 200
+ ip link set dev $rp1.200 addrgenmode eui64
+ ip link set dev $rp1.200 up
+ ip address add dev $rp1.200 192.0.2.2/28
+ ip address add dev $rp1.200 2001:db8:1::2/64
+ ip stats set dev $rp1.200 l3_stats on
+}
+
+router_rp1_200_destroy()
+{
+ ip stats set dev $rp1.200 l3_stats off
+ ip address del dev $rp1.200 2001:db8:1::2/64
+ ip address del dev $rp1.200 192.0.2.2/28
+ ip link del dev $rp1.200
+}
+
+router_create()
+{
+ ip link set dev $rp1 up
+ router_rp1_200_create
+
+ ip link set dev $rp2 up
+ vlan_create $rp2 200 "" 192.0.2.17/28 2001:db8:2::2/64
+}
+
+router_destroy()
+{
+ vlan_destroy $rp2 200
+ ip link set dev $rp2 down
+
+ router_rp1_200_destroy
+ ip link set dev $rp1 down
+}
+
+setup_prepare()
+{
+ h1=${NETIFS[p1]}
+ rp1=${NETIFS[p2]}
+
+ rp2=${NETIFS[p3]}
+ h2=${NETIFS[p4]}
+
+ rp1mac=$(mac_get $rp1)
+ rp2mac=$(mac_get $rp2)
+
+ vrf_prepare
+
+ h1_create
+ h2_create
+
+ router_create
+
+ forwarding_enable
+}
+
+cleanup()
+{
+ pre_cleanup
+
+ forwarding_restore
+
+ router_destroy
+
+ h2_destroy
+ h1_destroy
+
+ vrf_cleanup
+}
+
+ping_ipv4()
+{
+ ping_test $h1.200 192.0.2.18 " IPv4"
+}
+
+ping_ipv6()
+{
+ ping_test $h1.200 2001:db8:2::1 " IPv6"
+}
+
+send_packets_rx_ipv4()
+{
+ # Send 21 packets instead of 20, because the first one might trap and go
+ # through the SW datapath, which might not bump the HW counter.
+ $MZ $h1.200 -c 21 -d 20msec -p 100 \
+ -a own -b $rp1mac -A 192.0.2.1 -B 192.0.2.18 \
+ -q -t udp sp=54321,dp=12345
+}
+
+send_packets_rx_ipv6()
+{
+ $MZ $h1.200 -6 -c 21 -d 20msec -p 100 \
+ -a own -b $rp1mac -A 2001:db8:1::1 -B 2001:db8:2::1 \
+ -q -t udp sp=54321,dp=12345
+}
+
+send_packets_tx_ipv4()
+{
+ $MZ $h2.200 -c 21 -d 20msec -p 100 \
+ -a own -b $rp2mac -A 192.0.2.18 -B 192.0.2.1 \
+ -q -t udp sp=54321,dp=12345
+}
+
+send_packets_tx_ipv6()
+{
+ $MZ $h2.200 -6 -c 21 -d 20msec -p 100 \
+ -a own -b $rp2mac -A 2001:db8:2::1 -B 2001:db8:1::1 \
+ -q -t udp sp=54321,dp=12345
+}
+
+___test_stats()
+{
+ local dir=$1; shift
+ local prot=$1; shift
+
+ local a
+ local b
+
+ a=$(hw_stats_get l3_stats $rp1.200 ${dir} packets)
+ send_packets_${dir}_${prot}
+ "$@"
+ b=$(busywait "$TC_HIT_TIMEOUT" until_counter_is ">= $a + 20" \
+ hw_stats_get l3_stats $rp1.200 ${dir} packets)
+ check_err $? "Traffic not reflected in the counter: $a -> $b"
+}
+
+__test_stats()
+{
+ local dir=$1; shift
+ local prot=$1; shift
+
+ RET=0
+ ___test_stats "$dir" "$prot"
+ log_test "Test $dir packets: $prot"
+}
+
+test_stats_rx_ipv4()
+{
+ __test_stats rx ipv4
+}
+
+test_stats_tx_ipv4()
+{
+ __test_stats tx ipv4
+}
+
+test_stats_rx_ipv6()
+{
+ __test_stats rx ipv6
+}
+
+test_stats_tx_ipv6()
+{
+ __test_stats tx ipv6
+}
+
+# Make sure everything works well even after stats have been disabled and
+# reenabled on the same device without touching the L3 configuration.
+respin_enablement()
+{
+ log_info "Turning stats off and on again"
+ ip stats set dev $rp1.200 l3_stats off
+ ip stats set dev $rp1.200 l3_stats on
+}
+
+# For the initial run, l3_stats is enabled on a completely set up netdevice. Now
+# do it the other way around: enabling the L3 stats on an L2 netdevice, and only
+# then apply the L3 configuration.
+reapply_config()
+{
+ log_info "Reapplying configuration"
+
+ router_rp1_200_destroy
+
+ ip link add name $rp1.200 link $rp1 type vlan id 200
+ ip link set dev $rp1.200 addrgenmode none
+ ip stats set dev $rp1.200 l3_stats on
+ ip link set dev $rp1.200 addrgenmode eui64
+ ip link set dev $rp1.200 up
+ ip address add dev $rp1.200 192.0.2.2/28
+ ip address add dev $rp1.200 2001:db8:1::2/64
+}
+
+__test_stats_report()
+{
+ local dir=$1; shift
+ local prot=$1; shift
+
+ local a
+ local b
+
+ RET=0
+
+ a=$(hw_stats_get l3_stats $rp1.200 ${dir} packets)
+ send_packets_${dir}_${prot}
+ ip address flush dev $rp1.200
+ b=$(busywait "$TC_HIT_TIMEOUT" until_counter_is ">= $a + 20" \
+ hw_stats_get l3_stats $rp1.200 ${dir} packets)
+ check_err $? "Traffic not reflected in the counter: $a -> $b"
+ log_test "Test ${dir} packets: stats pushed on loss of L3"
+
+ ip stats set dev $rp1.200 l3_stats off
+ ip link del dev $rp1.200
+ router_rp1_200_create
+}
+
+test_stats_report_rx()
+{
+ __test_stats_report rx ipv4
+}
+
+test_stats_report_tx()
+{
+ __test_stats_report tx ipv4
+}
+
+test_destroy_enabled()
+{
+ RET=0
+
+ ip link del dev $rp1.200
+ router_rp1_200_create
+
+ log_test "Destroy l3_stats-enabled netdev"
+}
+
+test_double_enable()
+{
+ RET=0
+ ___test_stats rx ipv4 \
+ ip stats set dev $rp1.200 l3_stats on
+ log_test "Test stat retention across a spurious enablement"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+used=$(ip -j stats show dev $rp1.200 group offload subgroup hw_stats_info |
+ jq '.[].info.l3_stats.used')
+[[ $used = true ]]
+check_err $? "hw_stats_info.used=$used"
+log_test "l3_stats offloaded"
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/hw/hw_stats_l3_gre.sh b/tools/testing/selftests/drivers/net/hw/hw_stats_l3_gre.sh
new file mode 100755
index 0000000000..a94d92e1ab
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/hw/hw_stats_l3_gre.sh
@@ -0,0 +1,111 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test L3 stats on IP-in-IP GRE tunnel without key.
+
+# This test uses flat topology for IP tunneling tests. See ipip_lib.sh for more
+# details.
+
+ALL_TESTS="
+ ping_ipv4
+ test_stats_rx
+ test_stats_tx
+"
+NUM_NETIFS=6
+lib_dir=$(dirname "$0")
+source "$lib_dir"/../../../net/forwarding/lib.sh
+source "$lib_dir"/../../../net/forwarding/ipip_lib.sh
+source "$lib_dir"/../../../net/forwarding/tc_common.sh
+
+setup_prepare()
+{
+ h1=${NETIFS[p1]}
+ ol1=${NETIFS[p2]}
+
+ ul1=${NETIFS[p3]}
+ ul2=${NETIFS[p4]}
+
+ ol2=${NETIFS[p5]}
+ h2=${NETIFS[p6]}
+
+ ol1mac=$(mac_get $ol1)
+
+ forwarding_enable
+ vrf_prepare
+ h1_create
+ h2_create
+ sw1_flat_create gre $ol1 $ul1
+ sw2_flat_create gre $ol2 $ul2
+ ip stats set dev g1a l3_stats on
+ ip stats set dev g2a l3_stats on
+}
+
+cleanup()
+{
+ pre_cleanup
+
+ ip stats set dev g1a l3_stats off
+ ip stats set dev g2a l3_stats off
+
+ sw2_flat_destroy $ol2 $ul2
+ sw1_flat_destroy $ol1 $ul1
+ h2_destroy
+ h1_destroy
+
+ vrf_cleanup
+ forwarding_restore
+}
+
+ping_ipv4()
+{
+ RET=0
+
+ ping_test $h1 192.0.2.18 " gre flat"
+}
+
+send_packets_ipv4()
+{
+ # Send 21 packets instead of 20, because the first one might trap and go
+ # through the SW datapath, which might not bump the HW counter.
+ $MZ $h1 -c 21 -d 20msec -p 100 \
+ -a own -b $ol1mac -A 192.0.2.1 -B 192.0.2.18 \
+ -q -t udp sp=54321,dp=12345
+}
+
+test_stats()
+{
+ local dev=$1; shift
+ local dir=$1; shift
+
+ local a
+ local b
+
+ RET=0
+
+ a=$(hw_stats_get l3_stats $dev $dir packets)
+ send_packets_ipv4
+ b=$(busywait "$TC_HIT_TIMEOUT" until_counter_is ">= $a + 20" \
+ hw_stats_get l3_stats $dev $dir packets)
+ check_err $? "Traffic not reflected in the counter: $a -> $b"
+
+ log_test "Test $dir packets: $prot"
+}
+
+test_stats_tx()
+{
+ test_stats g1a tx
+}
+
+test_stats_rx()
+{
+ test_stats g2a rx
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/hw/lib/py/__init__.py b/tools/testing/selftests/drivers/net/hw/lib/py/__init__.py
new file mode 100644
index 0000000000..b582885786
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/hw/lib/py/__init__.py
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+
+import sys
+from pathlib import Path
+
+KSFT_DIR = (Path(__file__).parent / "../../../../..").resolve()
+
+try:
+ sys.path.append(KSFT_DIR.as_posix())
+ from net.lib.py import *
+ from drivers.net.lib.py import *
+except ModuleNotFoundError as e:
+ ksft_pr("Failed importing `net` library from kernel sources")
+ ksft_pr(str(e))
+ ktap_result(True, comment="SKIP")
+ sys.exit(4)
diff --git a/tools/testing/selftests/drivers/net/hw/loopback.sh b/tools/testing/selftests/drivers/net/hw/loopback.sh
new file mode 100755
index 0000000000..5acc3ff820
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/hw/loopback.sh
@@ -0,0 +1,103 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+ALL_TESTS="loopback_test"
+NUM_NETIFS=2
+lib_dir=$(dirname "$0")
+source "$lib_dir"/../../../net/forwarding/tc_common.sh
+source "$lib_dir"/../../../net/forwarding/lib.sh
+
+h1_create()
+{
+ simple_if_init $h1 192.0.2.1/24
+ tc qdisc add dev $h1 clsact
+}
+
+h1_destroy()
+{
+ tc qdisc del dev $h1 clsact
+ simple_if_fini $h1 192.0.2.1/24
+}
+
+h2_create()
+{
+ simple_if_init $h2
+}
+
+h2_destroy()
+{
+ simple_if_fini $h2
+}
+
+loopback_test()
+{
+ RET=0
+
+ tc filter add dev $h1 ingress protocol arp pref 1 handle 101 flower \
+ skip_hw arp_op reply arp_tip 192.0.2.1 action drop
+
+ $MZ $h1 -c 1 -t arp -q
+
+ tc_check_packets "dev $h1 ingress" 101 1
+ check_fail $? "Matched on a filter without loopback setup"
+
+ ethtool -K $h1 loopback on
+ check_err $? "Failed to enable loopback"
+
+ setup_wait_dev $h1
+
+ $MZ $h1 -c 1 -t arp -q
+
+ tc_check_packets "dev $h1 ingress" 101 1
+ check_err $? "Did not match on filter with loopback"
+
+ ethtool -K $h1 loopback off
+ check_err $? "Failed to disable loopback"
+
+ $MZ $h1 -c 1 -t arp -q
+
+ tc_check_packets "dev $h1 ingress" 101 2
+ check_fail $? "Matched on a filter after loopback was removed"
+
+ tc filter del dev $h1 ingress protocol arp pref 1 handle 101 flower
+
+ log_test "loopback"
+}
+
+setup_prepare()
+{
+ h1=${NETIFS[p1]}
+ h2=${NETIFS[p2]}
+
+ vrf_prepare
+
+ h1_create
+ h2_create
+
+ if ethtool -k $h1 | grep loopback | grep -q fixed; then
+ log_test "SKIP: dev $h1 does not support loopback feature"
+ exit $ksft_skip
+ fi
+}
+
+cleanup()
+{
+ pre_cleanup
+
+ h2_destroy
+ h1_destroy
+
+ vrf_cleanup
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/hw/pp_alloc_fail.py b/tools/testing/selftests/drivers/net/hw/pp_alloc_fail.py
new file mode 100755
index 0000000000..026d98976c
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/hw/pp_alloc_fail.py
@@ -0,0 +1,129 @@
+#!/usr/bin/env python3
+# SPDX-License-Identifier: GPL-2.0
+
+import time
+import os
+from lib.py import ksft_run, ksft_exit, ksft_pr
+from lib.py import KsftSkipEx, KsftFailEx
+from lib.py import NetdevFamily, NlError
+from lib.py import NetDrvEpEnv
+from lib.py import cmd, tool, GenerateTraffic
+
+
+def _write_fail_config(config):
+ for key, value in config.items():
+ with open("/sys/kernel/debug/fail_function/" + key, "w") as fp:
+ fp.write(str(value) + "\n")
+
+
+def _enable_pp_allocation_fail():
+ if not os.path.exists("/sys/kernel/debug/fail_function"):
+ raise KsftSkipEx("Kernel built without function error injection (or DebugFS)")
+
+ if not os.path.exists("/sys/kernel/debug/fail_function/page_pool_alloc_pages"):
+ with open("/sys/kernel/debug/fail_function/inject", "w") as fp:
+ fp.write("page_pool_alloc_pages\n")
+
+ _write_fail_config({
+ "verbose": 0,
+ "interval": 511,
+ "probability": 100,
+ "times": -1,
+ })
+
+
+def _disable_pp_allocation_fail():
+ if not os.path.exists("/sys/kernel/debug/fail_function"):
+ return
+
+ if os.path.exists("/sys/kernel/debug/fail_function/page_pool_alloc_pages"):
+ with open("/sys/kernel/debug/fail_function/inject", "w") as fp:
+ fp.write("\n")
+
+ _write_fail_config({
+ "probability": 0,
+ "times": 0,
+ })
+
+
+def test_pp_alloc(cfg, netdevnl):
+ def get_stats():
+ return netdevnl.qstats_get({"ifindex": cfg.ifindex}, dump=True)[0]
+
+ def check_traffic_flowing():
+ stat1 = get_stats()
+ time.sleep(1)
+ stat2 = get_stats()
+ if stat2['rx-packets'] - stat1['rx-packets'] < 15000:
+ raise KsftFailEx("Traffic seems low:", stat2['rx-packets'] - stat1['rx-packets'])
+
+
+ try:
+ stats = get_stats()
+ except NlError as e:
+ if e.nl_msg.error == -95:
+ stats = {}
+ else:
+ raise
+ if 'rx-alloc-fail' not in stats:
+ raise KsftSkipEx("Driver does not report 'rx-alloc-fail' via qstats")
+
+ set_g = False
+ traffic = None
+ try:
+ traffic = GenerateTraffic(cfg)
+
+ check_traffic_flowing()
+
+ _enable_pp_allocation_fail()
+
+ s1 = get_stats()
+ time.sleep(3)
+ s2 = get_stats()
+
+ if s2['rx-alloc-fail'] - s1['rx-alloc-fail'] < 1:
+ raise KsftSkipEx("Allocation failures not increasing")
+ if s2['rx-alloc-fail'] - s1['rx-alloc-fail'] < 100:
+ raise KsftSkipEx("Allocation increasing too slowly", s2['rx-alloc-fail'] - s1['rx-alloc-fail'],
+ "packets:", s2['rx-packets'] - s1['rx-packets'])
+
+ # Basic failures are fine, try to wobble some settings to catch extra failures
+ check_traffic_flowing()
+ g = tool("ethtool", "-g " + cfg.ifname, json=True)[0]
+ if 'rx' in g and g["rx"] * 2 <= g["rx-max"]:
+ new_g = g['rx'] * 2
+ elif 'rx' in g:
+ new_g = g['rx'] // 2
+ else:
+ new_g = None
+
+ if new_g:
+ set_g = cmd(f"ethtool -G {cfg.ifname} rx {new_g}", fail=False).ret == 0
+ if set_g:
+ ksft_pr("ethtool -G change retval: success")
+ else:
+ ksft_pr("ethtool -G change retval: did not succeed", new_g)
+ else:
+ ksft_pr("ethtool -G change retval: did not try")
+
+ time.sleep(0.1)
+ check_traffic_flowing()
+ finally:
+ _disable_pp_allocation_fail()
+ if traffic:
+ traffic.stop()
+ time.sleep(0.1)
+ if set_g:
+ cmd(f"ethtool -G {cfg.ifname} rx {g['rx']}")
+
+
+def main() -> None:
+ netdevnl = NetdevFamily()
+ with NetDrvEpEnv(__file__, nsim_test=False) as cfg:
+
+ ksft_run([test_pp_alloc], args=(cfg, netdevnl, ))
+ ksft_exit()
+
+
+if __name__ == "__main__":
+ main()
diff --git a/tools/testing/selftests/drivers/net/hw/settings b/tools/testing/selftests/drivers/net/hw/settings
new file mode 100644
index 0000000000..e7b9417537
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/hw/settings
@@ -0,0 +1 @@
+timeout=0