diff options
Diffstat (limited to 'tools/testing/selftests/net/forwarding/bridge_mdb.sh')
-rwxr-xr-x | tools/testing/selftests/net/forwarding/bridge_mdb.sh | 191 |
1 files changed, 189 insertions, 2 deletions
diff --git a/tools/testing/selftests/net/forwarding/bridge_mdb.sh b/tools/testing/selftests/net/forwarding/bridge_mdb.sh index a3678dfe58..d9d587454d 100755 --- a/tools/testing/selftests/net/forwarding/bridge_mdb.sh +++ b/tools/testing/selftests/net/forwarding/bridge_mdb.sh @@ -803,11 +803,198 @@ cfg_test_dump() cfg_test_dump_common "L2" l2_grps_get } +# Check flush functionality with different parameters. +cfg_test_flush() +{ + local num_entries + + # Add entries with different attributes and check that they are all + # flushed when the flush command is given with no parameters. + + # Different port. + bridge mdb add dev br0 port $swp1 grp 239.1.1.1 vid 10 + bridge mdb add dev br0 port $swp2 grp 239.1.1.2 vid 10 + + # Different VLAN ID. + bridge mdb add dev br0 port $swp1 grp 239.1.1.3 vid 10 + bridge mdb add dev br0 port $swp1 grp 239.1.1.4 vid 20 + + # Different routing protocol. + bridge mdb add dev br0 port $swp1 grp 239.1.1.5 vid 10 proto bgp + bridge mdb add dev br0 port $swp1 grp 239.1.1.6 vid 10 proto zebra + + # Different state. + bridge mdb add dev br0 port $swp1 grp 239.1.1.7 vid 10 permanent + bridge mdb add dev br0 port $swp1 grp 239.1.1.8 vid 10 temp + + bridge mdb flush dev br0 + num_entries=$(bridge mdb show dev br0 | wc -l) + [[ $num_entries -eq 0 ]] + check_err $? 0 "Not all entries flushed after flush all" + + # Check that when flushing by port only entries programmed with the + # specified port are flushed and the rest are not. + + bridge mdb add dev br0 port $swp1 grp 239.1.1.1 vid 10 + bridge mdb add dev br0 port $swp2 grp 239.1.1.1 vid 10 + bridge mdb add dev br0 port br0 grp 239.1.1.1 vid 10 + + bridge mdb flush dev br0 port $swp1 + + bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port $swp1" + check_fail $? "Entry not flushed by specified port" + bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port $swp2" + check_err $? "Entry flushed by wrong port" + bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port br0" + check_err $? "Host entry flushed by wrong port" + + bridge mdb flush dev br0 port br0 + + bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port br0" + check_fail $? "Host entry not flushed by specified port" + + bridge mdb flush dev br0 + + # Check that when flushing by VLAN ID only entries programmed with the + # specified VLAN ID are flushed and the rest are not. + + bridge mdb add dev br0 port $swp1 grp 239.1.1.1 vid 10 + bridge mdb add dev br0 port $swp2 grp 239.1.1.1 vid 10 + bridge mdb add dev br0 port $swp1 grp 239.1.1.1 vid 20 + bridge mdb add dev br0 port $swp2 grp 239.1.1.1 vid 20 + + bridge mdb flush dev br0 vid 10 + + bridge mdb get dev br0 grp 239.1.1.1 vid 10 &> /dev/null + check_fail $? "Entry not flushed by specified VLAN ID" + bridge mdb get dev br0 grp 239.1.1.1 vid 20 &> /dev/null + check_err $? "Entry flushed by wrong VLAN ID" + + bridge mdb flush dev br0 + + # Check that all permanent entries are flushed when "permanent" is + # specified and that temporary entries are not. + + bridge mdb add dev br0 port $swp1 grp 239.1.1.1 permanent vid 10 + bridge mdb add dev br0 port $swp2 grp 239.1.1.1 temp vid 10 + + bridge mdb flush dev br0 permanent + + bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port $swp1" + check_fail $? "Entry not flushed by \"permanent\" state" + bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port $swp2" + check_err $? "Entry flushed by wrong state (\"permanent\")" + + bridge mdb flush dev br0 + + # Check that all temporary entries are flushed when "nopermanent" is + # specified and that permanent entries are not. + + bridge mdb add dev br0 port $swp1 grp 239.1.1.1 permanent vid 10 + bridge mdb add dev br0 port $swp2 grp 239.1.1.1 temp vid 10 + + bridge mdb flush dev br0 nopermanent + + bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port $swp1" + check_err $? "Entry flushed by wrong state (\"nopermanent\")" + bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port $swp2" + check_fail $? "Entry not flushed by \"nopermanent\" state" + + bridge mdb flush dev br0 + + # Check that L2 host entries are not flushed when "nopermanent" is + # specified, but flushed when "permanent" is specified. + + bridge mdb add dev br0 port br0 grp 01:02:03:04:05:06 permanent vid 10 + + bridge mdb flush dev br0 nopermanent + + bridge mdb get dev br0 grp 01:02:03:04:05:06 vid 10 &> /dev/null + check_err $? "L2 host entry flushed by wrong state (\"nopermanent\")" + + bridge mdb flush dev br0 permanent + + bridge mdb get dev br0 grp 01:02:03:04:05:06 vid 10 &> /dev/null + check_fail $? "L2 host entry not flushed by \"permanent\" state" + + bridge mdb flush dev br0 + + # Check that IPv4 host entries are not flushed when "permanent" is + # specified, but flushed when "nopermanent" is specified. + + bridge mdb add dev br0 port br0 grp 239.1.1.1 temp vid 10 + + bridge mdb flush dev br0 permanent + + bridge mdb get dev br0 grp 239.1.1.1 vid 10 &> /dev/null + check_err $? "IPv4 host entry flushed by wrong state (\"permanent\")" + + bridge mdb flush dev br0 nopermanent + + bridge mdb get dev br0 grp 239.1.1.1 vid 10 &> /dev/null + check_fail $? "IPv4 host entry not flushed by \"nopermanent\" state" + + bridge mdb flush dev br0 + + # Check that IPv6 host entries are not flushed when "permanent" is + # specified, but flushed when "nopermanent" is specified. + + bridge mdb add dev br0 port br0 grp ff0e::1 temp vid 10 + + bridge mdb flush dev br0 permanent + + bridge mdb get dev br0 grp ff0e::1 vid 10 &> /dev/null + check_err $? "IPv6 host entry flushed by wrong state (\"permanent\")" + + bridge mdb flush dev br0 nopermanent + + bridge mdb get dev br0 grp ff0e::1 vid 10 &> /dev/null + check_fail $? "IPv6 host entry not flushed by \"nopermanent\" state" + + bridge mdb flush dev br0 + + # Check that when flushing by routing protocol only entries programmed + # with the specified routing protocol are flushed and the rest are not. + + bridge mdb add dev br0 port $swp1 grp 239.1.1.1 vid 10 proto bgp + bridge mdb add dev br0 port $swp2 grp 239.1.1.1 vid 10 proto zebra + bridge mdb add dev br0 port br0 grp 239.1.1.1 vid 10 + + bridge mdb flush dev br0 proto bgp + + bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port $swp1" + check_fail $? "Entry not flushed by specified routing protocol" + bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port $swp2" + check_err $? "Entry flushed by wrong routing protocol" + bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port br0" + check_err $? "Host entry flushed by wrong routing protocol" + + bridge mdb flush dev br0 + + # Test that an error is returned when trying to flush using unsupported + # parameters. + + bridge mdb flush dev br0 src_vni 10 &> /dev/null + check_fail $? "Managed to flush by source VNI" + + bridge mdb flush dev br0 dst 198.51.100.1 &> /dev/null + check_fail $? "Managed to flush by destination IP" + + bridge mdb flush dev br0 dst_port 4789 &> /dev/null + check_fail $? "Managed to flush by UDP destination port" + + bridge mdb flush dev br0 vni 10 &> /dev/null + check_fail $? "Managed to flush by destination VNI" + + log_test "Flush tests" +} + cfg_test() { cfg_test_host cfg_test_port cfg_test_dump + cfg_test_flush } __fwd_test_host_ip() @@ -1170,8 +1357,8 @@ ctrl_test() ctrl_mldv2_is_in_test } -if ! bridge mdb help 2>&1 | grep -q "get"; then - echo "SKIP: iproute2 too old, missing bridge mdb get support" +if ! bridge mdb help 2>&1 | grep -q "flush"; then + echo "SKIP: iproute2 too old, missing bridge mdb flush support" exit $ksft_skip fi |