diff options
Diffstat (limited to 'tools/testing/selftests/net/mptcp/mptcp_join.sh')
| -rwxr-xr-x | tools/testing/selftests/net/mptcp/mptcp_join.sh | 183 |
1 files changed, 132 insertions, 51 deletions
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index e6b778a9a9..24be952b4d 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -56,6 +56,8 @@ unset FAILING_LINKS unset test_linkfail unset addr_nr_ns1 unset addr_nr_ns2 +unset cestab_ns1 +unset cestab_ns2 unset sflags unset fastclose unset fullmesh @@ -516,13 +518,6 @@ get_failed_tests_ids() done | sort -n } -print_file_err() -{ - ls -l "$1" 1>&2 - echo -n "Trailing bytes are: " - tail -c 27 "$1" -} - check_transfer() { local in=$1 @@ -553,8 +548,8 @@ check_transfer() local sum=$((0${a} + 0${b})) if [ $check_invert -eq 0 ] || [ $sum -ne $((0xff)) ]; then fail_test "$what does not match (in, out):" - print_file_err "$in" - print_file_err "$out" + mptcp_lib_print_file_err "$in" + mptcp_lib_print_file_err "$out" return 1 else @@ -592,24 +587,6 @@ link_failure() done } -# $1: ns, $2: port -wait_local_port_listen() -{ - local listener_ns="${1}" - local port="${2}" - - local port_hex - port_hex="$(printf "%04X" "${port}")" - - local i - for i in $(seq 10); do - ip netns exec "${listener_ns}" cat /proc/net/tcp* | \ - awk "BEGIN {rc=1} {if (\$2 ~ /:${port_hex}\$/ && \$4 ~ /0A/) {rc=0; exit}} END {exit rc}" && - break - sleep 0.1 - done -} - rm_addr_count() { mptcp_lib_get_counter "${1}" "MPTcpExtRmAddr" @@ -796,7 +773,7 @@ pm_nl_check_endpoint() [ -n "$_flags" ]; flags="flags $_flags" shift elif [ $1 = "dev" ]; then - [ -n "$2" ]; dev="dev $1" + [ -n "$2" ]; dev="dev $2" shift elif [ $1 = "id" ]; then _id=$2 @@ -822,18 +799,18 @@ pm_nl_check_endpoint() line="${line% }" # the dump order is: address id flags port dev [ -n "$addr" ] && expected_line="$addr" - expected_line="$expected_line $id" - [ -n "$_flags" ] && expected_line="$expected_line ${_flags//","/" "}" - [ -n "$dev" ] && expected_line="$expected_line $dev" - [ -n "$port" ] && expected_line="$expected_line $port" + expected_line+=" $id" + [ -n "$_flags" ] && expected_line+=" ${_flags//","/" "}" + [ -n "$dev" ] && expected_line+=" $dev" + [ -n "$port" ] && expected_line+=" $port" else line=$(ip netns exec $ns ./pm_nl_ctl get $_id) # the dump order is: id flags dev address port expected_line="$id" - [ -n "$flags" ] && expected_line="$expected_line $flags" - [ -n "$dev" ] && expected_line="$expected_line $dev" - [ -n "$addr" ] && expected_line="$expected_line $addr" - [ -n "$_port" ] && expected_line="$expected_line $_port" + [ -n "$flags" ] && expected_line+=" $flags" + [ -n "$dev" ] && expected_line+=" $dev" + [ -n "$addr" ] && expected_line+=" $addr" + [ -n "$_port" ] && expected_line+=" $_port" fi if [ "$line" = "$expected_line" ]; then print_ok @@ -999,6 +976,34 @@ pm_nl_set_endpoint() fi } +chk_cestab_nr() +{ + local ns=$1 + local cestab=$2 + local count + + print_check "cestab $cestab" + count=$(mptcp_lib_get_counter ${ns} "MPTcpExtMPCurrEstab") + if [ -z "$count" ]; then + print_skip + elif [ "$count" != "$cestab" ]; then + fail_test "got $count current establish[s] expected $cestab" + else + print_ok + fi +} + +# $1 namespace 1, $2 namespace 2 +check_cestab() +{ + if [ -n "${cestab_ns1}" ]; then + chk_cestab_nr ${1} ${cestab_ns1} + fi + if [ -n "${cestab_ns2}" ]; then + chk_cestab_nr ${2} ${cestab_ns2} + fi +} + do_transfer() { local listener_ns="$1" @@ -1087,7 +1092,7 @@ do_transfer() fi local spid=$! - wait_local_port_listen "${listener_ns}" "${port}" + mptcp_lib_wait_local_port_listen "${listener_ns}" "${port}" extra_cl_args="$extra_args $extra_cl_args" if [ "$test_linkfail" -eq 0 ];then @@ -1112,6 +1117,7 @@ do_transfer() local cpid=$! pm_nl_set_endpoint $listener_ns $connector_ns $connect_addr + check_cestab $listener_ns $connector_ns wait $cpid local retc=$? @@ -1169,8 +1175,7 @@ make_file() local who=$2 local size=$3 - dd if=/dev/urandom of="$name" bs=1024 count=$size 2> /dev/null - echo -e "\nMPTCP_TEST_FILE_END_MARKER" >> "$name" + mptcp_lib_make_file $name 1024 $size print_info "Test file (size $size KB) for $who" } @@ -1256,7 +1261,7 @@ chk_csum_nr() print_check "sum" count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtDataCsumErr") if [ "$count" != "$csum_ns1" ]; then - extra_msg="$extra_msg ns1=$count" + extra_msg+=" ns1=$count" fi if [ -z "$count" ]; then print_skip @@ -1269,7 +1274,7 @@ chk_csum_nr() print_check "csum" count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtDataCsumErr") if [ "$count" != "$csum_ns2" ]; then - extra_msg="$extra_msg ns2=$count" + extra_msg+=" ns2=$count" fi if [ -z "$count" ]; then print_skip @@ -1313,7 +1318,7 @@ chk_fail_nr() print_check "ftx" count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMPFailTx") if [ "$count" != "$fail_tx" ]; then - extra_msg="$extra_msg,tx=$count" + extra_msg+=",tx=$count" fi if [ -z "$count" ]; then print_skip @@ -1327,7 +1332,7 @@ chk_fail_nr() print_check "failrx" count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtMPFailRx") if [ "$count" != "$fail_rx" ]; then - extra_msg="$extra_msg,rx=$count" + extra_msg+=",rx=$count" fi if [ -z "$count" ]; then print_skip @@ -1362,7 +1367,7 @@ chk_fclose_nr() if [ -z "$count" ]; then print_skip elif [ "$count" != "$fclose_tx" ]; then - extra_msg="$extra_msg,tx=$count" + extra_msg+=",tx=$count" fail_test "got $count MP_FASTCLOSE[s] TX expected $fclose_tx" else print_ok @@ -1373,7 +1378,7 @@ chk_fclose_nr() if [ -z "$count" ]; then print_skip elif [ "$count" != "$fclose_rx" ]; then - extra_msg="$extra_msg,rx=$count" + extra_msg+=",rx=$count" fail_test "got $count MP_FASTCLOSE[s] RX expected $fclose_rx" else print_ok @@ -1742,7 +1747,7 @@ chk_rm_nr() count=$((count + cnt)) if [ "$count" != "$rm_subflow_nr" ]; then suffix="$count in [$rm_subflow_nr:$((rm_subflow_nr*2))]" - extra_msg="$extra_msg simult" + extra_msg+=" simult" fi if [ $count -ge "$rm_subflow_nr" ] && \ [ "$count" -le "$((rm_subflow_nr *2 ))" ]; then @@ -2501,47 +2506,52 @@ add_tests() if reset "add single subflow"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 - addr_nr_ns2=1 speed=slow \ + addr_nr_ns2=1 speed=slow cestab_ns2=1 \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 + chk_cestab_nr $ns2 0 fi # add signal address if reset "add signal address"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 1 1 - addr_nr_ns1=1 speed=slow \ + addr_nr_ns1=1 speed=slow cestab_ns1=1 \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 1 1 + chk_cestab_nr $ns1 0 fi # add multiple subflows if reset "add multiple subflows"; then pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 0 2 - addr_nr_ns2=2 speed=slow \ + addr_nr_ns2=2 speed=slow cestab_ns2=1 \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 + chk_cestab_nr $ns2 0 fi # add multiple subflows IPv6 if reset "add multiple subflows IPv6"; then pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 0 2 - addr_nr_ns2=2 speed=slow \ + addr_nr_ns2=2 speed=slow cestab_ns2=1 \ run_tests $ns1 $ns2 dead:beef:1::1 chk_join_nr 2 2 2 + chk_cestab_nr $ns2 0 fi # add multiple addresses IPv6 if reset "add multiple addresses IPv6"; then pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 2 2 - addr_nr_ns1=2 speed=slow \ + addr_nr_ns1=2 speed=slow cestab_ns1=1 \ run_tests $ns1 $ns2 dead:beef:1::1 chk_join_nr 2 2 2 chk_add_nr 2 2 + chk_cestab_nr $ns1 0 fi } @@ -3469,6 +3479,75 @@ userspace_tests() kill_events_pids mptcp_lib_kill_wait $tests_pid fi + + # userspace pm create id 0 subflow + if reset_with_events "userspace pm create id 0 subflow" && + continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then + set_userspace_pm $ns2 + pm_nl_set_limits $ns1 0 1 + speed=5 \ + run_tests $ns1 $ns2 10.0.1.1 & + local tests_pid=$! + wait_mpj $ns2 + chk_mptcp_info subflows 0 subflows 0 + chk_subflows_total 1 1 + userspace_pm_add_sf $ns2 10.0.3.2 0 + chk_join_nr 1 1 1 + chk_mptcp_info subflows 1 subflows 1 + chk_subflows_total 2 2 + kill_events_pids + mptcp_lib_kill_wait $tests_pid + fi + + # userspace pm remove initial subflow + if reset_with_events "userspace pm remove initial subflow" && + continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then + set_userspace_pm $ns2 + pm_nl_set_limits $ns1 0 1 + speed=5 \ + run_tests $ns1 $ns2 10.0.1.1 & + local tests_pid=$! + wait_mpj $ns2 + userspace_pm_add_sf $ns2 10.0.3.2 20 + chk_join_nr 1 1 1 + chk_mptcp_info subflows 1 subflows 1 + chk_subflows_total 2 2 + userspace_pm_rm_sf $ns2 10.0.1.2 + # we don't look at the counter linked to the RM_ADDR but + # to the one linked to the subflows that have been removed + chk_rm_nr 0 1 + chk_rst_nr 0 0 invert + chk_mptcp_info subflows 1 subflows 1 + chk_subflows_total 1 1 + kill_events_pids + mptcp_lib_kill_wait $tests_pid + fi + + # userspace pm send RM_ADDR for ID 0 + if reset_with_events "userspace pm send RM_ADDR for ID 0" && + continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then + set_userspace_pm $ns1 + pm_nl_set_limits $ns2 1 1 + speed=5 \ + run_tests $ns1 $ns2 10.0.1.1 & + local tests_pid=$! + wait_mpj $ns1 + userspace_pm_add_addr $ns1 10.0.2.1 10 + chk_join_nr 1 1 1 + chk_add_nr 1 1 + chk_mptcp_info subflows 1 subflows 1 + chk_subflows_total 2 2 + chk_mptcp_info add_addr_signal 1 add_addr_accepted 1 + userspace_pm_rm_addr $ns1 0 + # we don't look at the counter linked to the subflows that + # have been removed but to the one linked to the RM_ADDR + chk_rm_nr 1 0 invert + chk_rst_nr 0 0 invert + chk_mptcp_info subflows 1 subflows 1 + chk_subflows_total 1 1 + kill_events_pids + mptcp_lib_kill_wait $tests_pid + fi } endpoint_tests() @@ -3510,6 +3589,8 @@ endpoint_tests() local tests_pid=$! wait_mpj $ns2 + pm_nl_check_endpoint "creation" \ + $ns2 10.0.2.2 id 2 flags subflow dev ns2eth2 chk_subflow_nr "before delete" 2 chk_mptcp_info subflows 1 subflows 1 |