diff options
Diffstat (limited to 'tools/testing/selftests/net/mptcp/mptcp_join.sh')
| -rwxr-xr-x | tools/testing/selftests/net/mptcp/mptcp_join.sh | 280 |
1 files changed, 155 insertions, 125 deletions
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 24be952b4d..2290125f6d 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -21,19 +21,19 @@ cinfail="" cinsent="" tmpfile="" cout="" +err="" capout="" ns1="" ns2="" -ksft_skip=4 iptables="iptables" ip6tables="ip6tables" timeout_poll=30 timeout_test=$((timeout_poll * 2 + 1)) -capture=0 -checksum=0 +capture=false +checksum=false ip_mptcp=0 check_invert=0 -validate_checksum=0 +validate_checksum=false init=0 evts_ns1="" evts_ns2="" @@ -47,7 +47,7 @@ declare -A all_tests declare -a only_tests_ids declare -a only_tests_names declare -A failed_tests -TEST_COUNT=0 +MPTCP_LIB_TEST_FORMAT="%03u %s\n" TEST_NAME="" nr_blank=6 @@ -85,22 +85,12 @@ init_partial() { capout=$(mktemp) - local sec rndh - sec=$(date +%s) - rndh=$(printf %x $sec)-$(mktemp -u XXXXXX) - - ns1="ns1-$rndh" - ns2="ns2-$rndh" + mptcp_lib_ns_init ns1 ns2 local netns for netns in "$ns1" "$ns2"; do - ip netns add $netns || exit $ksft_skip - ip -net $netns link set lo up - ip netns exec $netns sysctl -q net.mptcp.enabled=1 ip netns exec $netns sysctl -q net.mptcp.pm_type=0 2>/dev/null || true - ip netns exec $netns sysctl -q net.ipv4.conf.all.rp_filter=0 - ip netns exec $netns sysctl -q net.ipv4.conf.default.rp_filter=0 - if [ $checksum -eq 1 ]; then + if $checksum; then ip netns exec $netns sysctl -q net.mptcp.checksum_enabled=1 fi done @@ -135,8 +125,8 @@ init_shapers() { local i for i in $(seq 1 4); do - tc -n $ns1 qdisc add dev ns1eth$i root netem rate 20mbit delay 1 - tc -n $ns2 qdisc add dev ns2eth$i root netem rate 20mbit delay 1 + tc -n $ns1 qdisc add dev ns1eth$i root netem rate 20mbit delay 1ms + tc -n $ns2 qdisc add dev ns2eth$i root netem rate 20mbit delay 1ms done } @@ -144,51 +134,22 @@ cleanup_partial() { rm -f "$capout" - local netns - for netns in "$ns1" "$ns2"; do - ip netns del $netns - rm -f /tmp/$netns.{nstat,out} - done -} - -check_tools() -{ - mptcp_lib_check_mptcp - mptcp_lib_check_kallsyms - - if ! ip -Version &> /dev/null; then - echo "SKIP: Could not run test without ip tool" - exit $ksft_skip - fi - - if ! ss -h | grep -q MPTCP; then - echo "SKIP: ss tool does not support MPTCP" - exit $ksft_skip - fi - - # Use the legacy version if available to support old kernel versions - if iptables-legacy -V &> /dev/null; then - iptables="iptables-legacy" - ip6tables="ip6tables-legacy" - elif ! iptables -V &> /dev/null; then - echo "SKIP: Could not run all tests without iptables tool" - exit $ksft_skip - elif ! ip6tables -V &> /dev/null; then - echo "SKIP: Could not run all tests without ip6tables tool" - exit $ksft_skip - fi + mptcp_lib_ns_exit "${ns1}" "${ns2}" } init() { init=1 - check_tools + mptcp_lib_check_mptcp + mptcp_lib_check_kallsyms + mptcp_lib_check_tools ip ss "${iptables}" "${ip6tables}" sin=$(mktemp) sout=$(mktemp) cin=$(mktemp) cinsent=$(mktemp) cout=$(mktemp) + err=$(mktemp) evts_ns1=$(mktemp) evts_ns2=$(mktemp) @@ -204,14 +165,10 @@ cleanup() rm -f "$sin" "$sout" "$cinsent" "$cinfail" rm -f "$tmpfile" rm -rf $evts_ns1 $evts_ns2 + rm -f "$err" cleanup_partial } -print_title() -{ - printf "%03u %s\n" "${TEST_COUNT}" "${TEST_NAME}" -} - print_check() { printf "%-${nr_blank}s%-36s" " " "${*}" @@ -227,17 +184,17 @@ print_info() print_ok() { - mptcp_lib_print_ok "[ ok ]${1:+ ${*}}" + mptcp_lib_pr_ok "${@}" } print_fail() { - mptcp_lib_print_err "[fail]${1:+ ${*}}" + mptcp_lib_pr_fail "${@}" } print_skip() { - mptcp_lib_print_warn "[skip]${1:+ ${*}}" + mptcp_lib_pr_skip "${@}" } # [ $1: fail msg ] @@ -270,7 +227,7 @@ skip_test() local i for i in "${only_tests_ids[@]}"; do - if [ "${TEST_COUNT}" -eq "${i}" ]; then + if [ "$((MPTCP_LIB_TEST_COUNTER+1))" -eq "${i}" ]; then return 1 fi done @@ -305,14 +262,15 @@ reset() TEST_NAME="${1}" - TEST_COUNT=$((TEST_COUNT+1)) + MPTCP_LIB_SUBTEST_FLAKY=0 # reset if modified if skip_test; then + MPTCP_LIB_TEST_COUNTER=$((MPTCP_LIB_TEST_COUNTER+1)) last_test_ignored=1 return 1 fi - print_title + mptcp_lib_print_title "${TEST_NAME}" if [ "${init}" != "1" ]; then init @@ -385,7 +343,7 @@ reset_with_checksum() ip netns exec $ns1 sysctl -q net.mptcp.checksum_enabled=$ns1_enable ip netns exec $ns2 sysctl -q net.mptcp.checksum_enabled=$ns2_enable - validate_checksum=1 + validate_checksum=true } reset_with_allow_join_id0() @@ -418,7 +376,7 @@ reset_with_allow_join_id0() setup_fail_rules() { check_invert=1 - validate_checksum=1 + validate_checksum=true local i="$1" local ip="${2:-4}" local tables @@ -435,15 +393,15 @@ setup_fail_rules() -p tcp \ -m length --length 150:9999 \ -m statistic --mode nth --packet 1 --every 99999 \ - -j MARK --set-mark 42 || return ${ksft_skip} + -j MARK --set-mark 42 || return ${KSFT_SKIP} - tc -n $ns2 qdisc add dev ns2eth$i clsact || return ${ksft_skip} + tc -n $ns2 qdisc add dev ns2eth$i clsact || return ${KSFT_SKIP} tc -n $ns2 filter add dev ns2eth$i egress \ protocol ip prio 1000 \ handle 42 fw \ action pedit munge offset 148 u8 invert \ pipe csum tcp \ - index 100 || return ${ksft_skip} + index 100 || return ${KSFT_SKIP} } reset_with_fail() @@ -457,7 +415,7 @@ reset_with_fail() local rc=0 setup_fail_rules "${@}" || rc=$? - if [ ${rc} -eq ${ksft_skip} ]; then + if [ ${rc} -eq ${KSFT_SKIP} ]; then mark_as_skipped "unable to set the 'fail' rules" return 1 fi @@ -467,12 +425,8 @@ reset_with_events() { reset "${1}" || return 1 - :> "$evts_ns1" - :> "$evts_ns2" - ip netns exec $ns1 ./pm_nl_ctl events >> "$evts_ns1" 2>&1 & - evts_ns1_pid=$! - ip netns exec $ns2 ./pm_nl_ctl events >> "$evts_ns2" 2>&1 & - evts_ns2_pid=$! + mptcp_lib_events "${ns1}" "${evts_ns1}" evts_ns1_pid + mptcp_lib_events "${ns2}" "${evts_ns2}" evts_ns2_pid } reset_with_tcp_filter() @@ -497,13 +451,17 @@ reset_with_tcp_filter() # $1: err msg fail_test() { - ret=1 + if ! mptcp_lib_subtest_is_flaky; then + ret=${KSFT_FAIL} + fi - print_fail "${@}" + if [ ${#} -gt 0 ]; then + print_fail "${@}" + fi # just in case a test is marked twice as failed if [ ${last_test_failed} -eq 0 ]; then - failed_tests[${TEST_COUNT}]="${TEST_NAME}" + failed_tests[${MPTCP_LIB_TEST_COUNTER}]="${TEST_NAME}" dump_stats last_test_failed=1 fi @@ -645,7 +603,9 @@ wait_mpj() kill_events_pids() { mptcp_lib_kill_wait $evts_ns1_pid + evts_ns1_pid=0 mptcp_lib_kill_wait $evts_ns2_pid + evts_ns2_pid=0 } pm_nl_set_limits() @@ -1012,7 +972,7 @@ do_transfer() local srv_proto="$4" local connect_addr="$5" - local port=$((10000 + TEST_COUNT - 1)) + local port=$((10000 + MPTCP_LIB_TEST_COUNTER - 1)) local cappid local FAILING_LINKS=${FAILING_LINKS:-""} local fastclose=${fastclose:-""} @@ -1022,7 +982,7 @@ do_transfer() :> "$sout" :> "$capout" - if [ $capture -eq 1 ]; then + if $capture; then local capuser if [ -z $SUDO_USER ] ; then capuser="" @@ -1030,9 +990,9 @@ do_transfer() capuser="-Z $SUDO_USER" fi - capfile=$(printf "mp_join-%02u-%s.pcap" "$TEST_COUNT" "${listener_ns}") + capfile=$(printf "mp_join-%02u-%s.pcap" "$MPTCP_LIB_TEST_COUNTER" "${listener_ns}") - echo "Capturing traffic for test $TEST_COUNT into $capfile" + echo "Capturing traffic for test $MPTCP_LIB_TEST_COUNTER into $capfile" ip netns exec ${listener_ns} tcpdump -i any -s 65535 -B 32768 $capuser -w $capfile > "$capout" 2>&1 & cappid=$! @@ -1124,7 +1084,7 @@ do_transfer() wait $spid local rets=$? - if [ $capture -eq 1 ]; then + if $capture; then sleep 1 kill $cappid fi @@ -1512,7 +1472,7 @@ chk_join_nr() else print_ok fi - if [ $validate_checksum -eq 1 ]; then + if $validate_checksum; then chk_csum_nr $csum_ns1 $csum_ns2 chk_fail_nr $fail_nr $fail_nr chk_rst_nr $rst_nr $rst_nr @@ -2398,9 +2358,10 @@ remove_tests() if reset "remove invalid addresses"; then pm_nl_set_limits $ns1 3 3 pm_nl_add_endpoint $ns1 10.0.12.1 flags signal + # broadcast IP: no packet for this address will be received on ns1 + pm_nl_add_endpoint $ns1 224.0.0.1 flags signal pm_nl_add_endpoint $ns1 10.0.3.1 flags signal - pm_nl_add_endpoint $ns1 10.0.14.1 flags signal - pm_nl_set_limits $ns2 3 3 + pm_nl_set_limits $ns2 2 2 addr_nr_ns1=-3 speed=10 \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 @@ -2828,29 +2789,16 @@ backup_tests() fi } -SUB_ESTABLISHED=10 # MPTCP_EVENT_SUB_ESTABLISHED -LISTENER_CREATED=15 #MPTCP_EVENT_LISTENER_CREATED -LISTENER_CLOSED=16 #MPTCP_EVENT_LISTENER_CLOSED - -AF_INET=2 -AF_INET6=10 - verify_listener_events() { - local evt=$1 local e_type=$2 - local e_family=$3 local e_saddr=$4 local e_sport=$5 - local type - local family - local saddr - local sport local name - if [ $e_type = $LISTENER_CREATED ]; then + if [ $e_type = $MPTCP_LIB_EVENT_LISTENER_CREATED ]; then name="LISTENER_CREATED" - elif [ $e_type = $LISTENER_CLOSED ]; then + elif [ $e_type = $MPTCP_LIB_EVENT_LISTENER_CLOSED ]; then name="LISTENER_CLOSED " else name="$e_type" @@ -2863,23 +2811,11 @@ verify_listener_events() return fi - type=$(mptcp_lib_evts_get_info type "$evt" "$e_type") - family=$(mptcp_lib_evts_get_info family "$evt" "$e_type") - sport=$(mptcp_lib_evts_get_info sport "$evt" "$e_type") - if [ $family ] && [ $family = $AF_INET6 ]; then - saddr=$(mptcp_lib_evts_get_info saddr6 "$evt" "$e_type") - else - saddr=$(mptcp_lib_evts_get_info saddr4 "$evt" "$e_type") - fi - - if [ $type ] && [ $type = $e_type ] && - [ $family ] && [ $family = $e_family ] && - [ $saddr ] && [ $saddr = $e_saddr ] && - [ $sport ] && [ $sport = $e_sport ]; then + if mptcp_lib_verify_listener_events "${@}"; then print_ok return 0 fi - fail_test "$e_type:$type $e_family:$family $e_saddr:$saddr $e_sport:$sport" + fail_test } add_addr_ports_tests() @@ -2917,8 +2853,10 @@ add_addr_ports_tests() chk_add_nr 1 1 1 chk_rm_nr 1 1 invert - verify_listener_events $evts_ns1 $LISTENER_CREATED $AF_INET 10.0.2.1 10100 - verify_listener_events $evts_ns1 $LISTENER_CLOSED $AF_INET 10.0.2.1 10100 + verify_listener_events $evts_ns1 $MPTCP_LIB_EVENT_LISTENER_CREATED \ + $MPTCP_LIB_AF_INET 10.0.2.1 10100 + verify_listener_events $evts_ns1 $MPTCP_LIB_EVENT_LISTENER_CLOSED \ + $MPTCP_LIB_AF_INET 10.0.2.1 10100 kill_events_pids fi @@ -3245,6 +3183,7 @@ fullmesh_tests() fastclose_tests() { if reset_check_counter "fastclose test" "MPTcpExtMPFastcloseTx"; then + MPTCP_LIB_SUBTEST_FLAKY=1 test_linkfail=1024 fastclose=client \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 @@ -3253,6 +3192,7 @@ fastclose_tests() fi if reset_check_counter "fastclose server test" "MPTcpExtMPFastcloseRx"; then + MPTCP_LIB_SUBTEST_FLAKY=1 test_linkfail=1024 fastclose=server \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 0 0 0 1 @@ -3271,6 +3211,7 @@ fail_tests() { # single subflow if reset_with_fail "Infinite map" 1; then + MPTCP_LIB_SUBTEST_FLAKY=1 test_linkfail=128 \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 +1 +0 1 0 1 "$(pedit_action_pkts)" @@ -3279,7 +3220,8 @@ fail_tests() # multiple subflows if reset_with_fail "MP_FAIL MP_RST" 2; then - tc -n $ns2 qdisc add dev ns2eth1 root netem rate 1mbit delay 5 + MPTCP_LIB_SUBTEST_FLAKY=1 + tc -n $ns2 qdisc add dev ns2eth1 root netem rate 1mbit delay 5ms pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 pm_nl_add_endpoint $ns2 10.0.2.2 dev ns2eth2 flags subflow @@ -3356,6 +3298,77 @@ userspace_pm_rm_sf() wait_rm_sf $1 "${cnt}" } +check_output() +{ + local cmd="$1" + local expected="$2" + local msg="$3" + local rc=0 + + mptcp_lib_check_output "${err}" "${cmd}" "${expected}" || rc=${?} + if [ ${rc} -eq 2 ]; then + fail_test "fail to check output # error ${rc}" + elif [ ${rc} -eq 0 ]; then + print_ok + elif [ ${rc} -eq 1 ]; then + fail_test "fail to check output # different output" + fi +} + +# $1: ns +userspace_pm_dump() +{ + local evts=$evts_ns1 + local tk + + [ "$1" == "$ns2" ] && evts=$evts_ns2 + tk=$(mptcp_lib_evts_get_info token "$evts") + + ip netns exec $1 ./pm_nl_ctl dump token $tk +} + +# $1: ns ; $2: id +userspace_pm_get_addr() +{ + local evts=$evts_ns1 + local tk + + [ "$1" == "$ns2" ] && evts=$evts_ns2 + tk=$(mptcp_lib_evts_get_info token "$evts") + + ip netns exec $1 ./pm_nl_ctl get $2 token $tk +} + +userspace_pm_chk_dump_addr() +{ + local ns="${1}" + local exp="${2}" + local check="${3}" + + print_check "dump addrs ${check}" + + if mptcp_lib_kallsyms_has "mptcp_userspace_pm_dump_addr$"; then + check_output "userspace_pm_dump ${ns}" "${exp}" + else + print_skip + fi +} + +userspace_pm_chk_get_addr() +{ + local ns="${1}" + local id="${2}" + local exp="${3}" + + print_check "get id ${id} addr" + + if mptcp_lib_kallsyms_has "mptcp_userspace_pm_get_addr$"; then + check_output "userspace_pm_get_addr ${ns} ${id}" "${exp}" + else + print_skip + fi +} + userspace_tests() { # userspace pm type prevents add_addr @@ -3447,10 +3460,18 @@ userspace_tests() chk_mptcp_info subflows 2 subflows 2 chk_subflows_total 3 3 chk_mptcp_info add_addr_signal 2 add_addr_accepted 2 + userspace_pm_chk_dump_addr "${ns1}" \ + $'id 10 flags signal 10.0.2.1\nid 20 flags signal 10.0.3.1' \ + "signal" + userspace_pm_chk_get_addr "${ns1}" "10" "id 10 flags signal 10.0.2.1" + userspace_pm_chk_get_addr "${ns1}" "20" "id 20 flags signal 10.0.3.1" userspace_pm_rm_addr $ns1 10 - userspace_pm_rm_sf $ns1 "::ffff:10.0.2.1" $SUB_ESTABLISHED + userspace_pm_rm_sf $ns1 "::ffff:10.0.2.1" $MPTCP_LIB_EVENT_SUB_ESTABLISHED + userspace_pm_chk_dump_addr "${ns1}" \ + "id 20 flags signal 10.0.3.1" "after rm_addr 10" userspace_pm_rm_addr $ns1 20 - userspace_pm_rm_sf $ns1 10.0.3.1 $SUB_ESTABLISHED + userspace_pm_rm_sf $ns1 10.0.3.1 $MPTCP_LIB_EVENT_SUB_ESTABLISHED + userspace_pm_chk_dump_addr "${ns1}" "" "after rm_addr 20" chk_rm_nr 2 2 invert chk_mptcp_info subflows 0 subflows 0 chk_subflows_total 1 1 @@ -3471,8 +3492,15 @@ userspace_tests() chk_join_nr 1 1 1 chk_mptcp_info subflows 1 subflows 1 chk_subflows_total 2 2 + userspace_pm_chk_dump_addr "${ns2}" \ + "id 20 flags subflow 10.0.3.2" \ + "subflow" + userspace_pm_chk_get_addr "${ns2}" "20" "id 20 flags subflow 10.0.3.2" userspace_pm_rm_addr $ns2 20 - userspace_pm_rm_sf $ns2 10.0.3.2 $SUB_ESTABLISHED + userspace_pm_rm_sf $ns2 10.0.3.2 $MPTCP_LIB_EVENT_SUB_ESTABLISHED + userspace_pm_chk_dump_addr "${ns2}" \ + "" \ + "after rm_addr 20" chk_rm_nr 1 1 chk_mptcp_info subflows 0 subflows 0 chk_subflows_total 1 1 @@ -3492,6 +3520,8 @@ userspace_tests() chk_mptcp_info subflows 0 subflows 0 chk_subflows_total 1 1 userspace_pm_add_sf $ns2 10.0.3.2 0 + userspace_pm_chk_dump_addr "${ns2}" \ + "id 0 flags subflow 10.0.3.2" "id 0 subflow" chk_join_nr 1 1 1 chk_mptcp_info subflows 1 subflows 1 chk_subflows_total 2 2 @@ -3612,7 +3642,7 @@ usage() { if [ -n "${1}" ]; then echo "${1}" - ret=1 + ret=${KSFT_FAIL} fi echo "mptcp_join usage:" @@ -3675,10 +3705,10 @@ while getopts "${all_tests_args}cCih" opt; do tests+=("${all_tests[${opt}]}") ;; c) - capture=1 + capture=true ;; C) - checksum=1 + checksum=true ;; i) ip_mptcp=1 |