diff options
Diffstat (limited to 'tools/testing/selftests/net/udpgro_fwd.sh')
-rwxr-xr-x | tools/testing/selftests/net/udpgro_fwd.sh | 255 |
1 files changed, 255 insertions, 0 deletions
diff --git a/tools/testing/selftests/net/udpgro_fwd.sh b/tools/testing/selftests/net/udpgro_fwd.sh new file mode 100755 index 0000000000..c079565add --- /dev/null +++ b/tools/testing/selftests/net/udpgro_fwd.sh @@ -0,0 +1,255 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +BPF_FILE="../bpf/xdp_dummy.bpf.o" +readonly BASE="ns-$(mktemp -u XXXXXX)" +readonly SRC=2 +readonly DST=1 +readonly DST_NAT=100 +readonly NS_SRC=$BASE$SRC +readonly NS_DST=$BASE$DST + +# "baremetal" network used for raw UDP traffic +readonly BM_NET_V4=192.168.1. +readonly BM_NET_V6=2001:db8:: + +# "overlay" network used for UDP over UDP tunnel traffic +readonly OL_NET_V4=172.16.1. +readonly OL_NET_V6=2001:db8:1:: +readonly NPROCS=`nproc` + +cleanup() { + local ns + local -r jobs="$(jobs -p)" + [ -n "${jobs}" ] && kill -1 ${jobs} 2>/dev/null + + for ns in $NS_SRC $NS_DST; do + ip netns del $ns 2>/dev/null + done +} + +trap cleanup EXIT + +create_ns() { + local net + local ns + + for ns in $NS_SRC $NS_DST; do + ip netns add $ns + ip -n $ns link set dev lo up + done + + ip link add name veth$SRC type veth peer name veth$DST + + for ns in $SRC $DST; do + ip link set dev veth$ns netns $BASE$ns + ip -n $BASE$ns link set dev veth$ns up + ip -n $BASE$ns addr add dev veth$ns $BM_NET_V4$ns/24 + ip -n $BASE$ns addr add dev veth$ns $BM_NET_V6$ns/64 nodad + done + ip -n $NS_DST link set veth$DST xdp object ${BPF_FILE} section xdp 2>/dev/null +} + +create_vxlan_endpoint() { + local -r netns=$1 + local -r bm_dev=$2 + local -r bm_rem_addr=$3 + local -r vxlan_dev=$4 + local -r vxlan_id=$5 + local -r vxlan_port=4789 + + ip -n $netns link set dev $bm_dev up + ip -n $netns link add dev $vxlan_dev type vxlan id $vxlan_id \ + dstport $vxlan_port remote $bm_rem_addr + ip -n $netns link set dev $vxlan_dev up +} + +create_vxlan_pair() { + local ns + + create_ns + + for ns in $SRC $DST; do + # note that 3 - $SRC == $DST and 3 - $DST == $SRC + create_vxlan_endpoint $BASE$ns veth$ns $BM_NET_V4$((3 - $ns)) vxlan$ns 4 + ip -n $BASE$ns addr add dev vxlan$ns $OL_NET_V4$ns/24 + done + for ns in $SRC $DST; do + create_vxlan_endpoint $BASE$ns veth$ns $BM_NET_V6$((3 - $ns)) vxlan6$ns 6 + ip -n $BASE$ns addr add dev vxlan6$ns $OL_NET_V6$ns/24 nodad + done +} + +is_ipv6() { + if [[ $1 =~ .*:.* ]]; then + return 0 + fi + return 1 +} + +run_test() { + local -r msg=$1 + local -r dst=$2 + local -r pkts=$3 + local -r vxpkts=$4 + local bind=$5 + local rx_args="" + local rx_family="-4" + local family=-4 + local filter=IpInReceives + local ipt=iptables + + printf "%-40s" "$msg" + + if is_ipv6 $dst; then + # rx program does not support '-6' and implies ipv6 usage by default + rx_family="" + family=-6 + filter=Ip6InReceives + ipt=ip6tables + fi + + rx_args="$rx_family" + [ -n "$bind" ] && rx_args="$rx_args -b $bind" + + # send a single GSO packet, segmented in 10 UDP frames. + # Always expect 10 UDP frames on RX side as rx socket does + # not enable GRO + ip netns exec $NS_DST $ipt -A INPUT -p udp --dport 4789 + ip netns exec $NS_DST $ipt -A INPUT -p udp --dport 8000 + ip netns exec $NS_DST ./udpgso_bench_rx -C 1000 -R 10 -n 10 -l 1300 $rx_args & + local spid=$! + sleep 0.1 + ip netns exec $NS_SRC ./udpgso_bench_tx $family -M 1 -s 13000 -S 1300 -D $dst + local retc=$? + wait $spid + local rets=$? + if [ ${rets} -ne 0 ] || [ ${retc} -ne 0 ]; then + echo " fail client exit code $retc, server $rets" + ret=1 + return + fi + + local rcv=`ip netns exec $NS_DST $ipt"-save" -c | grep 'dport 8000' | \ + sed -e 's/\[//' -e 's/:.*//'` + if [ $rcv != $pkts ]; then + echo " fail - received $rcv packets, expected $pkts" + ret=1 + return + fi + + local vxrcv=`ip netns exec $NS_DST $ipt"-save" -c | grep 'dport 4789' | \ + sed -e 's/\[//' -e 's/:.*//'` + + # upper net can generate a little noise, allow some tolerance + if [ $vxrcv -lt $vxpkts -o $vxrcv -gt $((vxpkts + 3)) ]; then + echo " fail - received $vxrcv vxlan packets, expected $vxpkts" + ret=1 + return + fi + echo " ok" +} + +run_bench() { + local -r msg=$1 + local -r dst=$2 + local family=-4 + + printf "%-40s" "$msg" + if [ $NPROCS -lt 2 ]; then + echo " skip - needed 2 CPUs found $NPROCS" + return + fi + + is_ipv6 $dst && family=-6 + + # bind the sender and the receiver to different CPUs to try + # get reproducible results + ip netns exec $NS_DST bash -c "echo 2 > /sys/class/net/veth$DST/queues/rx-0/rps_cpus" + ip netns exec $NS_DST taskset 0x2 ./udpgso_bench_rx -C 1000 -R 10 & + local spid=$! + sleep 0.1 + ip netns exec $NS_SRC taskset 0x1 ./udpgso_bench_tx $family -l 3 -S 1300 -D $dst + local retc=$? + wait $spid + local rets=$? + if [ ${rets} -ne 0 ] || [ ${retc} -ne 0 ]; then + echo " fail client exit code $retc, server $rets" + ret=1 + return + fi +} + +for family in 4 6; do + BM_NET=$BM_NET_V4 + OL_NET=$OL_NET_V4 + IPT=iptables + SUFFIX=24 + VXDEV=vxlan + PING=ping + + if [ $family = 6 ]; then + BM_NET=$BM_NET_V6 + OL_NET=$OL_NET_V6 + SUFFIX="64 nodad" + VXDEV=vxlan6 + IPT=ip6tables + # Use ping6 on systems where ping doesn't handle IPv6 + ping -w 1 -c 1 ::1 > /dev/null 2>&1 || PING="ping6" + fi + + echo "IPv$family" + + create_ns + run_test "No GRO" $BM_NET$DST 10 0 + cleanup + + create_ns + ip netns exec $NS_DST ethtool -K veth$DST rx-gro-list on + run_test "GRO frag list" $BM_NET$DST 1 0 + cleanup + + # UDP GRO fwd skips aggregation when find an udp socket with the GRO option + # if there is an UDP tunnel in the running system, such lookup happen + # take place. + # use NAT to circumvent GRO FWD check + create_ns + ip -n $NS_DST addr add dev veth$DST $BM_NET$DST_NAT/$SUFFIX + ip netns exec $NS_DST ethtool -K veth$DST rx-udp-gro-forwarding on + ip netns exec $NS_DST $IPT -t nat -I PREROUTING -d $BM_NET$DST_NAT \ + -j DNAT --to-destination $BM_NET$DST + run_test "GRO fwd" $BM_NET$DST_NAT 1 0 $BM_NET$DST + cleanup + + create_ns + run_bench "UDP fwd perf" $BM_NET$DST + ip netns exec $NS_DST ethtool -K veth$DST rx-udp-gro-forwarding on + run_bench "UDP GRO fwd perf" $BM_NET$DST + cleanup + + create_vxlan_pair + ip netns exec $NS_DST ethtool -K veth$DST rx-gro-list on + run_test "GRO frag list over UDP tunnel" $OL_NET$DST 1 1 + cleanup + + # use NAT to circumvent GRO FWD check + create_vxlan_pair + ip -n $NS_DST addr add dev $VXDEV$DST $OL_NET$DST_NAT/$SUFFIX + ip netns exec $NS_DST ethtool -K veth$DST rx-udp-gro-forwarding on + ip netns exec $NS_DST $IPT -t nat -I PREROUTING -d $OL_NET$DST_NAT \ + -j DNAT --to-destination $OL_NET$DST + + # load arp cache before running the test to reduce the amount of + # stray traffic on top of the UDP tunnel + ip netns exec $NS_SRC $PING -q -c 1 $OL_NET$DST_NAT >/dev/null + run_test "GRO fwd over UDP tunnel" $OL_NET$DST_NAT 1 1 $OL_NET$DST + cleanup + + create_vxlan_pair + run_bench "UDP tunnel fwd perf" $OL_NET$DST + ip netns exec $NS_DST ethtool -K veth$DST rx-udp-gro-forwarding on + run_bench "UDP tunnel GRO fwd perf" $OL_NET$DST + cleanup +done + +exit $ret |