diff options
Diffstat (limited to 'tools/testing/selftests/net')
125 files changed, 14715 insertions, 2953 deletions
diff --git a/tools/testing/selftests/net/.gitignore b/tools/testing/selftests/net/.gitignore index 2f9d378ede..666ab7d939 100644 --- a/tools/testing/selftests/net/.gitignore +++ b/tools/testing/selftests/net/.gitignore @@ -2,9 +2,9 @@ bind_bhash bind_timewait bind_wildcard -csum cmsg_sender diag_uid +epoll_busy_poll fin_ack_lat gro hwtstamp_config @@ -31,6 +31,7 @@ reuseport_dualstack rxtimestamp sctp_hello scm_pidfd +scm_rights sk_bind_sendto_listen sk_connect_zero_addr socket @@ -42,7 +43,6 @@ tap tcp_fastopen_backup_key tcp_inq tcp_mmap -test_unix_oob timestamping tls toeplitz diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index 7b6918d5f4..d9393569d0 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -20,7 +20,6 @@ TEST_PROGS += reuseaddr_ports_exhausted.sh TEST_PROGS += txtimestamp.sh TEST_PROGS += vrf-xfrm-tests.sh TEST_PROGS += rxtimestamp.sh -TEST_PROGS += devlink_port_split.py TEST_PROGS += drop_monitor_tests.sh TEST_PROGS += vrf_route_leaking.sh TEST_PROGS += bareudp.sh @@ -35,6 +34,7 @@ TEST_PROGS += gre_gso.sh TEST_PROGS += cmsg_so_mark.sh TEST_PROGS += cmsg_time.sh cmsg_ipv6.sh TEST_PROGS += netns-name.sh +TEST_PROGS += nl_netdev.py TEST_PROGS += srv6_end_dt46_l3vpn_test.sh TEST_PROGS += srv6_end_dt4_l3vpn_test.sh TEST_PROGS += srv6_end_dt6_l3vpn_test.sh @@ -43,6 +43,8 @@ TEST_PROGS += srv6_hl2encap_red_l2vpn_test.sh TEST_PROGS += srv6_end_next_csid_l3vpn_test.sh TEST_PROGS += srv6_end_x_next_csid_l3vpn_test.sh TEST_PROGS += srv6_end_flavors_test.sh +TEST_PROGS += srv6_end_dx4_netfilter_test.sh +TEST_PROGS += srv6_end_dx6_netfilter_test.sh TEST_PROGS += vrf_strict_mode_test.sh TEST_PROGS += arp_ndisc_evict_nocarrier.sh TEST_PROGS += ndisc_unsolicited_na_test.sh @@ -67,7 +69,7 @@ TEST_GEN_FILES += ipsec TEST_GEN_FILES += ioam6_parser TEST_GEN_FILES += gro TEST_GEN_PROGS = reuseport_bpf reuseport_bpf_cpu reuseport_bpf_numa -TEST_GEN_PROGS += reuseport_dualstack reuseaddr_conflict tls tun tap +TEST_GEN_PROGS += reuseport_dualstack reuseaddr_conflict tls tun tap epoll_busy_poll TEST_GEN_FILES += toeplitz TEST_GEN_FILES += cmsg_sender TEST_GEN_FILES += stress_reuseport_listen @@ -81,9 +83,6 @@ TEST_PROGS += test_ingress_egress_chaining.sh TEST_GEN_PROGS += so_incoming_cpu TEST_PROGS += sctp_vrf.sh TEST_GEN_FILES += sctp_hello -TEST_GEN_FILES += csum -TEST_GEN_FILES += nat6to4.o -TEST_GEN_FILES += xdp_dummy.o TEST_GEN_FILES += ip_local_port_range TEST_GEN_FILES += bind_wildcard TEST_PROGS += test_vxlan_mdb.sh @@ -93,63 +92,22 @@ TEST_PROGS += test_bridge_backup_port.sh TEST_PROGS += fdb_flush.sh TEST_PROGS += fq_band_pktlimit.sh TEST_PROGS += vlan_hw_filter.sh +TEST_PROGS += bpf_offload.py TEST_FILES := settings TEST_FILES += in_netns.sh lib.sh net_helper.sh setup_loopback.sh setup_veth.sh +TEST_GEN_FILES += $(patsubst %.c,%.o,$(wildcard *.bpf.c)) + TEST_INCLUDES := forwarding/lib.sh include ../lib.mk +$(OUTPUT)/epoll_busy_poll: LDLIBS += -lcap $(OUTPUT)/reuseport_bpf_numa: LDLIBS += -lnuma $(OUTPUT)/tcp_mmap: LDLIBS += -lpthread -lcrypto $(OUTPUT)/tcp_inq: LDLIBS += -lpthread $(OUTPUT)/bind_bhash: LDLIBS += -lpthread $(OUTPUT)/io_uring_zerocopy_tx: CFLAGS += -I../../../include/ -# Rules to generate bpf objs -CLANG ?= clang -SCRATCH_DIR := $(OUTPUT)/tools -BUILD_DIR := $(SCRATCH_DIR)/build -BPFDIR := $(abspath ../../../lib/bpf) -APIDIR := $(abspath ../../../include/uapi) - -CCINCLUDE += -I../bpf -CCINCLUDE += -I../../../../usr/include/ -CCINCLUDE += -I$(SCRATCH_DIR)/include - -BPFOBJ := $(BUILD_DIR)/libbpf/libbpf.a - -MAKE_DIRS := $(BUILD_DIR)/libbpf -$(MAKE_DIRS): - mkdir -p $@ - -# Get Clang's default includes on this system, as opposed to those seen by -# '--target=bpf'. This fixes "missing" files on some architectures/distros, -# such as asm/byteorder.h, asm/socket.h, asm/sockios.h, sys/cdefs.h etc. -# -# Use '-idirafter': Don't interfere with include mechanics except where the -# build would have failed anyways. -define get_sys_includes -$(shell $(1) $(2) -v -E - </dev/null 2>&1 \ - | sed -n '/<...> search starts here:/,/End of search list./{ s| \(/.*\)|-idirafter \1|p }') \ -$(shell $(1) $(2) -dM -E - </dev/null | grep '__riscv_xlen ' | awk '{printf("-D__riscv_xlen=%d -D__BITS_PER_LONG=%d", $$3, $$3)}') -endef - -ifneq ($(CROSS_COMPILE),) -CLANG_TARGET_ARCH = --target=$(notdir $(CROSS_COMPILE:%-=%)) -endif - -CLANG_SYS_INCLUDES = $(call get_sys_includes,$(CLANG),$(CLANG_TARGET_ARCH)) - -$(OUTPUT)/nat6to4.o $(OUTPUT)/xdp_dummy.o: $(OUTPUT)/%.o : %.c $(BPFOBJ) | $(MAKE_DIRS) - $(CLANG) -O2 --target=bpf -c $< $(CCINCLUDE) $(CLANG_SYS_INCLUDES) -o $@ - -$(BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile) \ - $(APIDIR)/linux/bpf.h \ - | $(BUILD_DIR)/libbpf - $(MAKE) $(submake_extras) -C $(BPFDIR) OUTPUT=$(BUILD_DIR)/libbpf/ \ - EXTRA_CFLAGS='-g -O0' \ - DESTDIR=$(SCRATCH_DIR) prefix= all install_headers - -EXTRA_CLEAN := $(SCRATCH_DIR) +include bpf.mk diff --git a/tools/testing/selftests/net/af_unix/Makefile b/tools/testing/selftests/net/af_unix/Makefile index 221c387a7d..5058447954 100644 --- a/tools/testing/selftests/net/af_unix/Makefile +++ b/tools/testing/selftests/net/af_unix/Makefile @@ -1,4 +1,4 @@ CFLAGS += $(KHDR_INCLUDES) -TEST_GEN_PROGS := diag_uid test_unix_oob unix_connect scm_pidfd +TEST_GEN_PROGS := diag_uid msg_oob scm_pidfd scm_rights unix_connect include ../../lib.mk diff --git a/tools/testing/selftests/net/af_unix/config b/tools/testing/selftests/net/af_unix/config new file mode 100644 index 0000000000..3736856776 --- /dev/null +++ b/tools/testing/selftests/net/af_unix/config @@ -0,0 +1,3 @@ +CONFIG_UNIX=y +CONFIG_AF_UNIX_OOB=y +CONFIG_UNIX_DIAG=m diff --git a/tools/testing/selftests/net/af_unix/msg_oob.c b/tools/testing/selftests/net/af_unix/msg_oob.c new file mode 100644 index 0000000000..16d0c172ea --- /dev/null +++ b/tools/testing/selftests/net/af_unix/msg_oob.c @@ -0,0 +1,734 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright Amazon.com Inc. or its affiliates. */ + +#include <fcntl.h> +#include <string.h> +#include <unistd.h> + +#include <netinet/in.h> +#include <sys/epoll.h> +#include <sys/ioctl.h> +#include <sys/signalfd.h> +#include <sys/socket.h> + +#include "../../kselftest_harness.h" + +#define BUF_SZ 32 + +FIXTURE(msg_oob) +{ + int fd[4]; /* 0: AF_UNIX sender + * 1: AF_UNIX receiver + * 2: TCP sender + * 3: TCP receiver + */ + int signal_fd; + int epoll_fd[2]; /* 0: AF_UNIX receiver + * 1: TCP receiver + */ + bool tcp_compliant; +}; + +FIXTURE_VARIANT(msg_oob) +{ + bool peek; +}; + +FIXTURE_VARIANT_ADD(msg_oob, no_peek) +{ + .peek = false, +}; + +FIXTURE_VARIANT_ADD(msg_oob, peek) +{ + .peek = true +}; + +static void create_unix_socketpair(struct __test_metadata *_metadata, + FIXTURE_DATA(msg_oob) *self) +{ + int ret; + + ret = socketpair(AF_UNIX, SOCK_STREAM | SOCK_NONBLOCK, 0, self->fd); + ASSERT_EQ(ret, 0); +} + +static void create_tcp_socketpair(struct __test_metadata *_metadata, + FIXTURE_DATA(msg_oob) *self) +{ + struct sockaddr_in addr; + socklen_t addrlen; + int listen_fd; + int ret; + + listen_fd = socket(AF_INET, SOCK_STREAM, 0); + ASSERT_GE(listen_fd, 0); + + ret = listen(listen_fd, -1); + ASSERT_EQ(ret, 0); + + addrlen = sizeof(addr); + ret = getsockname(listen_fd, (struct sockaddr *)&addr, &addrlen); + ASSERT_EQ(ret, 0); + + self->fd[2] = socket(AF_INET, SOCK_STREAM, 0); + ASSERT_GE(self->fd[2], 0); + + ret = connect(self->fd[2], (struct sockaddr *)&addr, addrlen); + ASSERT_EQ(ret, 0); + + self->fd[3] = accept(listen_fd, (struct sockaddr *)&addr, &addrlen); + ASSERT_GE(self->fd[3], 0); + + ret = fcntl(self->fd[3], F_SETFL, O_NONBLOCK); + ASSERT_EQ(ret, 0); +} + +static void setup_sigurg(struct __test_metadata *_metadata, + FIXTURE_DATA(msg_oob) *self) +{ + struct signalfd_siginfo siginfo; + int pid = getpid(); + sigset_t mask; + int i, ret; + + for (i = 0; i < 2; i++) { + ret = ioctl(self->fd[i * 2 + 1], FIOSETOWN, &pid); + ASSERT_EQ(ret, 0); + } + + ret = sigemptyset(&mask); + ASSERT_EQ(ret, 0); + + ret = sigaddset(&mask, SIGURG); + ASSERT_EQ(ret, 0); + + ret = sigprocmask(SIG_BLOCK, &mask, NULL); + ASSERT_EQ(ret, 0); + + self->signal_fd = signalfd(-1, &mask, SFD_NONBLOCK); + ASSERT_GE(self->signal_fd, 0); + + ret = read(self->signal_fd, &siginfo, sizeof(siginfo)); + ASSERT_EQ(ret, -1); +} + +static void setup_epollpri(struct __test_metadata *_metadata, + FIXTURE_DATA(msg_oob) *self) +{ + struct epoll_event event = { + .events = EPOLLPRI, + }; + int i; + + for (i = 0; i < 2; i++) { + int ret; + + self->epoll_fd[i] = epoll_create1(0); + ASSERT_GE(self->epoll_fd[i], 0); + + ret = epoll_ctl(self->epoll_fd[i], EPOLL_CTL_ADD, self->fd[i * 2 + 1], &event); + ASSERT_EQ(ret, 0); + } +} + +static void close_sockets(FIXTURE_DATA(msg_oob) *self) +{ + int i; + + for (i = 0; i < 4; i++) + close(self->fd[i]); +} + +FIXTURE_SETUP(msg_oob) +{ + create_unix_socketpair(_metadata, self); + create_tcp_socketpair(_metadata, self); + + setup_sigurg(_metadata, self); + setup_epollpri(_metadata, self); + + self->tcp_compliant = true; +} + +FIXTURE_TEARDOWN(msg_oob) +{ + close_sockets(self); +} + +static void __epollpair(struct __test_metadata *_metadata, + FIXTURE_DATA(msg_oob) *self, + bool oob_remaining) +{ + struct epoll_event event[2] = {}; + int i, ret[2]; + + for (i = 0; i < 2; i++) + ret[i] = epoll_wait(self->epoll_fd[i], &event[i], 1, 0); + + ASSERT_EQ(ret[0], oob_remaining); + + if (self->tcp_compliant) + ASSERT_EQ(ret[0], ret[1]); + + if (oob_remaining) { + ASSERT_EQ(event[0].events, EPOLLPRI); + + if (self->tcp_compliant) + ASSERT_EQ(event[0].events, event[1].events); + } +} + +static void __sendpair(struct __test_metadata *_metadata, + FIXTURE_DATA(msg_oob) *self, + const void *buf, size_t len, int flags) +{ + int i, ret[2]; + + for (i = 0; i < 2; i++) { + struct signalfd_siginfo siginfo = {}; + int bytes; + + ret[i] = send(self->fd[i * 2], buf, len, flags); + + bytes = read(self->signal_fd, &siginfo, sizeof(siginfo)); + + if (flags & MSG_OOB) { + ASSERT_EQ(bytes, sizeof(siginfo)); + ASSERT_EQ(siginfo.ssi_signo, SIGURG); + + bytes = read(self->signal_fd, &siginfo, sizeof(siginfo)); + } + + ASSERT_EQ(bytes, -1); + } + + ASSERT_EQ(ret[0], len); + ASSERT_EQ(ret[0], ret[1]); +} + +static void __recvpair(struct __test_metadata *_metadata, + FIXTURE_DATA(msg_oob) *self, + const void *expected_buf, int expected_len, + int buf_len, int flags) +{ + int i, ret[2], recv_errno[2], expected_errno = 0; + char recv_buf[2][BUF_SZ] = {}; + bool printed = false; + + ASSERT_GE(BUF_SZ, buf_len); + + errno = 0; + + for (i = 0; i < 2; i++) { + ret[i] = recv(self->fd[i * 2 + 1], recv_buf[i], buf_len, flags); + recv_errno[i] = errno; + } + + if (expected_len < 0) { + expected_errno = -expected_len; + expected_len = -1; + } + + if (ret[0] != expected_len || recv_errno[0] != expected_errno) { + TH_LOG("AF_UNIX :%s", ret[0] < 0 ? strerror(recv_errno[0]) : recv_buf[0]); + TH_LOG("Expected:%s", expected_errno ? strerror(expected_errno) : expected_buf); + + ASSERT_EQ(ret[0], expected_len); + ASSERT_EQ(recv_errno[0], expected_errno); + } + + if (ret[0] != ret[1] || recv_errno[0] != recv_errno[1]) { + TH_LOG("AF_UNIX :%s", ret[0] < 0 ? strerror(recv_errno[0]) : recv_buf[0]); + TH_LOG("TCP :%s", ret[1] < 0 ? strerror(recv_errno[1]) : recv_buf[1]); + + printed = true; + + if (self->tcp_compliant) { + ASSERT_EQ(ret[0], ret[1]); + ASSERT_EQ(recv_errno[0], recv_errno[1]); + } + } + + if (expected_len >= 0) { + int cmp; + + cmp = strncmp(expected_buf, recv_buf[0], expected_len); + if (cmp) { + TH_LOG("AF_UNIX :%s", ret[0] < 0 ? strerror(recv_errno[0]) : recv_buf[0]); + TH_LOG("Expected:%s", expected_errno ? strerror(expected_errno) : expected_buf); + + ASSERT_EQ(cmp, 0); + } + + cmp = strncmp(recv_buf[0], recv_buf[1], expected_len); + if (cmp) { + if (!printed) { + TH_LOG("AF_UNIX :%s", ret[0] < 0 ? strerror(recv_errno[0]) : recv_buf[0]); + TH_LOG("TCP :%s", ret[1] < 0 ? strerror(recv_errno[1]) : recv_buf[1]); + } + + if (self->tcp_compliant) + ASSERT_EQ(cmp, 0); + } + } +} + +static void __setinlinepair(struct __test_metadata *_metadata, + FIXTURE_DATA(msg_oob) *self) +{ + int i, oob_inline = 1; + + for (i = 0; i < 2; i++) { + int ret; + + ret = setsockopt(self->fd[i * 2 + 1], SOL_SOCKET, SO_OOBINLINE, + &oob_inline, sizeof(oob_inline)); + ASSERT_EQ(ret, 0); + } +} + +static void __siocatmarkpair(struct __test_metadata *_metadata, + FIXTURE_DATA(msg_oob) *self, + bool oob_head) +{ + int answ[2] = {}; + int i; + + for (i = 0; i < 2; i++) { + int ret; + + ret = ioctl(self->fd[i * 2 + 1], SIOCATMARK, &answ[i]); + ASSERT_EQ(ret, 0); + } + + ASSERT_EQ(answ[0], oob_head); + + if (self->tcp_compliant) + ASSERT_EQ(answ[0], answ[1]); +} + +#define sendpair(buf, len, flags) \ + __sendpair(_metadata, self, buf, len, flags) + +#define recvpair(expected_buf, expected_len, buf_len, flags) \ + do { \ + if (variant->peek) \ + __recvpair(_metadata, self, \ + expected_buf, expected_len, \ + buf_len, (flags) | MSG_PEEK); \ + __recvpair(_metadata, self, \ + expected_buf, expected_len, buf_len, flags); \ + } while (0) + +#define epollpair(oob_remaining) \ + __epollpair(_metadata, self, oob_remaining) + +#define siocatmarkpair(oob_head) \ + __siocatmarkpair(_metadata, self, oob_head) + +#define setinlinepair() \ + __setinlinepair(_metadata, self) + +#define tcp_incompliant \ + for (self->tcp_compliant = false; \ + self->tcp_compliant == false; \ + self->tcp_compliant = true) + +TEST_F(msg_oob, non_oob) +{ + sendpair("x", 1, 0); + epollpair(false); + siocatmarkpair(false); + + recvpair("", -EINVAL, 1, MSG_OOB); + epollpair(false); + siocatmarkpair(false); +} + +TEST_F(msg_oob, oob) +{ + sendpair("x", 1, MSG_OOB); + epollpair(true); + siocatmarkpair(true); + + recvpair("x", 1, 1, MSG_OOB); + epollpair(false); + siocatmarkpair(true); +} + +TEST_F(msg_oob, oob_drop) +{ + sendpair("x", 1, MSG_OOB); + epollpair(true); + siocatmarkpair(true); + + recvpair("", -EAGAIN, 1, 0); /* Drop OOB. */ + epollpair(false); + siocatmarkpair(false); + + recvpair("", -EINVAL, 1, MSG_OOB); + epollpair(false); + siocatmarkpair(false); +} + +TEST_F(msg_oob, oob_ahead) +{ + sendpair("hello", 5, MSG_OOB); + epollpair(true); + siocatmarkpair(false); + + recvpair("o", 1, 1, MSG_OOB); + epollpair(false); + siocatmarkpair(false); + + recvpair("hell", 4, 4, 0); + epollpair(false); + siocatmarkpair(true); +} + +TEST_F(msg_oob, oob_break) +{ + sendpair("hello", 5, MSG_OOB); + epollpair(true); + siocatmarkpair(false); + + recvpair("hell", 4, 5, 0); /* Break at OOB even with enough buffer. */ + epollpair(true); + siocatmarkpair(true); + + recvpair("o", 1, 1, MSG_OOB); + epollpair(false); + siocatmarkpair(true); + + recvpair("", -EAGAIN, 1, 0); + siocatmarkpair(false); +} + +TEST_F(msg_oob, oob_ahead_break) +{ + sendpair("hello", 5, MSG_OOB); + epollpair(true); + siocatmarkpair(false); + + sendpair("world", 5, 0); + epollpair(true); + siocatmarkpair(false); + + recvpair("o", 1, 1, MSG_OOB); + epollpair(false); + siocatmarkpair(false); + + recvpair("hell", 4, 9, 0); /* Break at OOB even after it's recv()ed. */ + epollpair(false); + siocatmarkpair(true); + + recvpair("world", 5, 5, 0); + epollpair(false); + siocatmarkpair(false); +} + +TEST_F(msg_oob, oob_break_drop) +{ + sendpair("hello", 5, MSG_OOB); + epollpair(true); + siocatmarkpair(false); + + sendpair("world", 5, 0); + epollpair(true); + siocatmarkpair(false); + + recvpair("hell", 4, 10, 0); /* Break at OOB even with enough buffer. */ + epollpair(true); + siocatmarkpair(true); + + recvpair("world", 5, 10, 0); /* Drop OOB and recv() the next skb. */ + epollpair(false); + siocatmarkpair(false); + + recvpair("", -EINVAL, 1, MSG_OOB); + epollpair(false); + siocatmarkpair(false); +} + +TEST_F(msg_oob, ex_oob_break) +{ + sendpair("hello", 5, MSG_OOB); + epollpair(true); + siocatmarkpair(false); + + sendpair("wor", 3, MSG_OOB); + epollpair(true); + siocatmarkpair(false); + + sendpair("ld", 2, 0); + epollpair(true); + siocatmarkpair(false); + + recvpair("hellowo", 7, 10, 0); /* Break at OOB but not at ex-OOB. */ + epollpair(true); + siocatmarkpair(true); + + recvpair("r", 1, 1, MSG_OOB); + epollpair(false); + siocatmarkpair(true); + + recvpair("ld", 2, 2, 0); + epollpair(false); + siocatmarkpair(false); +} + +TEST_F(msg_oob, ex_oob_drop) +{ + sendpair("x", 1, MSG_OOB); + epollpair(true); + siocatmarkpair(true); + + sendpair("y", 1, MSG_OOB); /* TCP drops "x" at this moment. */ + epollpair(true); + + tcp_incompliant { + siocatmarkpair(false); + + recvpair("x", 1, 1, 0); /* TCP drops "y" by passing through it. */ + epollpair(true); + siocatmarkpair(true); + + recvpair("y", 1, 1, MSG_OOB); /* TCP returns -EINVAL. */ + epollpair(false); + siocatmarkpair(true); + } +} + +TEST_F(msg_oob, ex_oob_drop_2) +{ + sendpair("x", 1, MSG_OOB); + epollpair(true); + siocatmarkpair(true); + + sendpair("y", 1, MSG_OOB); /* TCP drops "x" at this moment. */ + epollpair(true); + + tcp_incompliant { + siocatmarkpair(false); + } + + recvpair("y", 1, 1, MSG_OOB); + epollpair(false); + + tcp_incompliant { + siocatmarkpair(false); + + recvpair("x", 1, 1, 0); /* TCP returns -EAGAIN. */ + epollpair(false); + siocatmarkpair(true); + } +} + +TEST_F(msg_oob, ex_oob_ahead_break) +{ + sendpair("hello", 5, MSG_OOB); + epollpair(true); + siocatmarkpair(false); + + sendpair("wor", 3, MSG_OOB); + epollpair(true); + siocatmarkpair(false); + + recvpair("r", 1, 1, MSG_OOB); + epollpair(false); + siocatmarkpair(false); + + sendpair("ld", 2, MSG_OOB); + epollpair(true); + siocatmarkpair(false); + + tcp_incompliant { + recvpair("hellowol", 8, 10, 0); /* TCP recv()s "helloworl", why "r" ?? */ + } + + epollpair(true); + siocatmarkpair(true); + + recvpair("d", 1, 1, MSG_OOB); + epollpair(false); + siocatmarkpair(true); +} + +TEST_F(msg_oob, ex_oob_siocatmark) +{ + sendpair("hello", 5, MSG_OOB); + epollpair(true); + siocatmarkpair(false); + + recvpair("o", 1, 1, MSG_OOB); + epollpair(false); + siocatmarkpair(false); + + sendpair("world", 5, MSG_OOB); + epollpair(true); + siocatmarkpair(false); + + recvpair("hell", 4, 4, 0); /* Intentionally stop at ex-OOB. */ + epollpair(true); + siocatmarkpair(false); +} + +TEST_F(msg_oob, inline_oob) +{ + setinlinepair(); + + sendpair("x", 1, MSG_OOB); + epollpair(true); + siocatmarkpair(true); + + recvpair("", -EINVAL, 1, MSG_OOB); + epollpair(true); + siocatmarkpair(true); + + recvpair("x", 1, 1, 0); + epollpair(false); + siocatmarkpair(false); +} + +TEST_F(msg_oob, inline_oob_break) +{ + setinlinepair(); + + sendpair("hello", 5, MSG_OOB); + epollpair(true); + siocatmarkpair(false); + + recvpair("", -EINVAL, 1, MSG_OOB); + epollpair(true); + siocatmarkpair(false); + + recvpair("hell", 4, 5, 0); /* Break at OOB but not at ex-OOB. */ + epollpair(true); + siocatmarkpair(true); + + recvpair("o", 1, 1, 0); + epollpair(false); + siocatmarkpair(false); +} + +TEST_F(msg_oob, inline_oob_ahead_break) +{ + sendpair("hello", 5, MSG_OOB); + epollpair(true); + siocatmarkpair(false); + + sendpair("world", 5, 0); + epollpair(true); + siocatmarkpair(false); + + recvpair("o", 1, 1, MSG_OOB); + epollpair(false); + siocatmarkpair(false); + + setinlinepair(); + + recvpair("hell", 4, 9, 0); /* Break at OOB even with enough buffer. */ + epollpair(false); + siocatmarkpair(true); + + tcp_incompliant { + recvpair("world", 5, 6, 0); /* TCP recv()s "oworld", ... "o" ??? */ + } + + epollpair(false); + siocatmarkpair(false); +} + +TEST_F(msg_oob, inline_ex_oob_break) +{ + sendpair("hello", 5, MSG_OOB); + epollpair(true); + siocatmarkpair(false); + + sendpair("wor", 3, MSG_OOB); + epollpair(true); + siocatmarkpair(false); + + sendpair("ld", 2, 0); + epollpair(true); + siocatmarkpair(false); + + setinlinepair(); + + recvpair("hellowo", 7, 10, 0); /* Break at OOB but not at ex-OOB. */ + epollpair(true); + siocatmarkpair(true); + + recvpair("rld", 3, 3, 0); + epollpair(false); + siocatmarkpair(false); +} + +TEST_F(msg_oob, inline_ex_oob_no_drop) +{ + sendpair("x", 1, MSG_OOB); + epollpair(true); + siocatmarkpair(true); + + setinlinepair(); + + sendpair("y", 1, MSG_OOB); /* TCP does NOT drops "x" at this moment. */ + epollpair(true); + siocatmarkpair(false); + + recvpair("x", 1, 1, 0); + epollpair(true); + siocatmarkpair(true); + + recvpair("y", 1, 1, 0); + epollpair(false); + siocatmarkpair(false); +} + +TEST_F(msg_oob, inline_ex_oob_drop) +{ + sendpair("x", 1, MSG_OOB); + epollpair(true); + siocatmarkpair(true); + + sendpair("y", 1, MSG_OOB); /* TCP drops "x" at this moment. */ + epollpair(true); + + setinlinepair(); + + tcp_incompliant { + siocatmarkpair(false); + + recvpair("x", 1, 1, 0); /* TCP recv()s "y". */ + epollpair(true); + siocatmarkpair(true); + + recvpair("y", 1, 1, 0); /* TCP returns -EAGAIN. */ + epollpair(false); + siocatmarkpair(false); + } +} + +TEST_F(msg_oob, inline_ex_oob_siocatmark) +{ + sendpair("hello", 5, MSG_OOB); + epollpair(true); + siocatmarkpair(false); + + recvpair("o", 1, 1, MSG_OOB); + epollpair(false); + siocatmarkpair(false); + + setinlinepair(); + + sendpair("world", 5, MSG_OOB); + epollpair(true); + siocatmarkpair(false); + + recvpair("hell", 4, 4, 0); /* Intentionally stop at ex-OOB. */ + epollpair(true); + siocatmarkpair(false); +} + +TEST_HARNESS_MAIN diff --git a/tools/testing/selftests/net/af_unix/scm_rights.c b/tools/testing/selftests/net/af_unix/scm_rights.c new file mode 100644 index 0000000000..d663362565 --- /dev/null +++ b/tools/testing/selftests/net/af_unix/scm_rights.c @@ -0,0 +1,307 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright Amazon.com Inc. or its affiliates. */ +#define _GNU_SOURCE +#include <sched.h> + +#include <stdio.h> +#include <string.h> +#include <unistd.h> +#include <sys/types.h> +#include <sys/socket.h> +#include <sys/un.h> + +#include "../../kselftest_harness.h" + +FIXTURE(scm_rights) +{ + int fd[32]; +}; + +FIXTURE_VARIANT(scm_rights) +{ + char name[32]; + int type; + int flags; + bool test_listener; +}; + +FIXTURE_VARIANT_ADD(scm_rights, dgram) +{ + .name = "UNIX ", + .type = SOCK_DGRAM, + .flags = 0, + .test_listener = false, +}; + +FIXTURE_VARIANT_ADD(scm_rights, stream) +{ + .name = "UNIX-STREAM ", + .type = SOCK_STREAM, + .flags = 0, + .test_listener = false, +}; + +FIXTURE_VARIANT_ADD(scm_rights, stream_oob) +{ + .name = "UNIX-STREAM ", + .type = SOCK_STREAM, + .flags = MSG_OOB, + .test_listener = false, +}; + +FIXTURE_VARIANT_ADD(scm_rights, stream_listener) +{ + .name = "UNIX-STREAM ", + .type = SOCK_STREAM, + .flags = 0, + .test_listener = true, +}; + +FIXTURE_VARIANT_ADD(scm_rights, stream_listener_oob) +{ + .name = "UNIX-STREAM ", + .type = SOCK_STREAM, + .flags = MSG_OOB, + .test_listener = true, +}; + +static int count_sockets(struct __test_metadata *_metadata, + const FIXTURE_VARIANT(scm_rights) *variant) +{ + int sockets = -1, len, ret; + char *line = NULL; + size_t unused; + FILE *f; + + f = fopen("/proc/net/protocols", "r"); + ASSERT_NE(NULL, f); + + len = strlen(variant->name); + + while (getline(&line, &unused, f) != -1) { + int unused2; + + if (strncmp(line, variant->name, len)) + continue; + + ret = sscanf(line + len, "%d %d", &unused2, &sockets); + ASSERT_EQ(2, ret); + + break; + } + + free(line); + + ret = fclose(f); + ASSERT_EQ(0, ret); + + return sockets; +} + +FIXTURE_SETUP(scm_rights) +{ + int ret; + + ret = unshare(CLONE_NEWNET); + ASSERT_EQ(0, ret); + + ret = count_sockets(_metadata, variant); + ASSERT_EQ(0, ret); +} + +FIXTURE_TEARDOWN(scm_rights) +{ + int ret; + + sleep(1); + + ret = count_sockets(_metadata, variant); + ASSERT_EQ(0, ret); +} + +static void create_listeners(struct __test_metadata *_metadata, + FIXTURE_DATA(scm_rights) *self, + int n) +{ + struct sockaddr_un addr = { + .sun_family = AF_UNIX, + }; + socklen_t addrlen; + int i, ret; + + for (i = 0; i < n * 2; i += 2) { + self->fd[i] = socket(AF_UNIX, SOCK_STREAM, 0); + ASSERT_LE(0, self->fd[i]); + + addrlen = sizeof(addr.sun_family); + ret = bind(self->fd[i], (struct sockaddr *)&addr, addrlen); + ASSERT_EQ(0, ret); + + ret = listen(self->fd[i], -1); + ASSERT_EQ(0, ret); + + addrlen = sizeof(addr); + ret = getsockname(self->fd[i], (struct sockaddr *)&addr, &addrlen); + ASSERT_EQ(0, ret); + + self->fd[i + 1] = socket(AF_UNIX, SOCK_STREAM, 0); + ASSERT_LE(0, self->fd[i + 1]); + + ret = connect(self->fd[i + 1], (struct sockaddr *)&addr, addrlen); + ASSERT_EQ(0, ret); + } +} + +static void create_socketpairs(struct __test_metadata *_metadata, + FIXTURE_DATA(scm_rights) *self, + const FIXTURE_VARIANT(scm_rights) *variant, + int n) +{ + int i, ret; + + ASSERT_GE(sizeof(self->fd) / sizeof(int), n); + + for (i = 0; i < n * 2; i += 2) { + ret = socketpair(AF_UNIX, variant->type, 0, self->fd + i); + ASSERT_EQ(0, ret); + } +} + +static void __create_sockets(struct __test_metadata *_metadata, + FIXTURE_DATA(scm_rights) *self, + const FIXTURE_VARIANT(scm_rights) *variant, + int n) +{ + ASSERT_LE(n * 2, sizeof(self->fd) / sizeof(self->fd[0])); + + if (variant->test_listener) + create_listeners(_metadata, self, n); + else + create_socketpairs(_metadata, self, variant, n); +} + +static void __close_sockets(struct __test_metadata *_metadata, + FIXTURE_DATA(scm_rights) *self, + int n) +{ + int i, ret; + + ASSERT_GE(sizeof(self->fd) / sizeof(int), n); + + for (i = 0; i < n * 2; i++) { + ret = close(self->fd[i]); + ASSERT_EQ(0, ret); + } +} + +void __send_fd(struct __test_metadata *_metadata, + const FIXTURE_DATA(scm_rights) *self, + const FIXTURE_VARIANT(scm_rights) *variant, + int inflight, int receiver) +{ +#define MSG "x" +#define MSGLEN 1 + struct { + struct cmsghdr cmsghdr; + int fd[2]; + } cmsg = { + .cmsghdr = { + .cmsg_len = CMSG_LEN(sizeof(cmsg.fd)), + .cmsg_level = SOL_SOCKET, + .cmsg_type = SCM_RIGHTS, + }, + .fd = { + self->fd[inflight * 2], + self->fd[inflight * 2], + }, + }; + struct iovec iov = { + .iov_base = MSG, + .iov_len = MSGLEN, + }; + struct msghdr msg = { + .msg_name = NULL, + .msg_namelen = 0, + .msg_iov = &iov, + .msg_iovlen = 1, + .msg_control = &cmsg, + .msg_controllen = CMSG_SPACE(sizeof(cmsg.fd)), + }; + int ret; + + ret = sendmsg(self->fd[receiver * 2 + 1], &msg, variant->flags); + ASSERT_EQ(MSGLEN, ret); +} + +#define create_sockets(n) \ + __create_sockets(_metadata, self, variant, n) +#define close_sockets(n) \ + __close_sockets(_metadata, self, n) +#define send_fd(inflight, receiver) \ + __send_fd(_metadata, self, variant, inflight, receiver) + +TEST_F(scm_rights, self_ref) +{ + create_sockets(2); + + send_fd(0, 0); + + send_fd(1, 1); + + close_sockets(2); +} + +TEST_F(scm_rights, triangle) +{ + create_sockets(6); + + send_fd(0, 1); + send_fd(1, 2); + send_fd(2, 0); + + send_fd(3, 4); + send_fd(4, 5); + send_fd(5, 3); + + close_sockets(6); +} + +TEST_F(scm_rights, cross_edge) +{ + create_sockets(8); + + send_fd(0, 1); + send_fd(1, 2); + send_fd(2, 0); + send_fd(1, 3); + send_fd(3, 2); + + send_fd(4, 5); + send_fd(5, 6); + send_fd(6, 4); + send_fd(5, 7); + send_fd(7, 6); + + close_sockets(8); +} + +TEST_F(scm_rights, backtrack_from_scc) +{ + create_sockets(10); + + send_fd(0, 1); + send_fd(0, 4); + send_fd(1, 2); + send_fd(2, 3); + send_fd(3, 1); + + send_fd(5, 6); + send_fd(5, 9); + send_fd(6, 7); + send_fd(7, 8); + send_fd(8, 6); + + close_sockets(10); +} + +TEST_HARNESS_MAIN diff --git a/tools/testing/selftests/net/af_unix/test_unix_oob.c b/tools/testing/selftests/net/af_unix/test_unix_oob.c deleted file mode 100644 index a7c51889ac..0000000000 --- a/tools/testing/selftests/net/af_unix/test_unix_oob.c +++ /dev/null @@ -1,436 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -#include <stdio.h> -#include <stdlib.h> -#include <sys/socket.h> -#include <arpa/inet.h> -#include <unistd.h> -#include <string.h> -#include <fcntl.h> -#include <sys/ioctl.h> -#include <errno.h> -#include <netinet/tcp.h> -#include <sys/un.h> -#include <sys/signal.h> -#include <sys/poll.h> - -static int pipefd[2]; -static int signal_recvd; -static pid_t producer_id; -static char sock_name[32]; - -static void sig_hand(int sn, siginfo_t *si, void *p) -{ - signal_recvd = sn; -} - -static int set_sig_handler(int signal) -{ - struct sigaction sa; - - sa.sa_sigaction = sig_hand; - sigemptyset(&sa.sa_mask); - sa.sa_flags = SA_SIGINFO | SA_RESTART; - - return sigaction(signal, &sa, NULL); -} - -static void set_filemode(int fd, int set) -{ - int flags = fcntl(fd, F_GETFL, 0); - - if (set) - flags &= ~O_NONBLOCK; - else - flags |= O_NONBLOCK; - fcntl(fd, F_SETFL, flags); -} - -static void signal_producer(int fd) -{ - char cmd; - - cmd = 'S'; - write(fd, &cmd, sizeof(cmd)); -} - -static void wait_for_signal(int fd) -{ - char buf[5]; - - read(fd, buf, 5); -} - -static void die(int status) -{ - fflush(NULL); - unlink(sock_name); - kill(producer_id, SIGTERM); - exit(status); -} - -int is_sioctatmark(int fd) -{ - int ans = -1; - - if (ioctl(fd, SIOCATMARK, &ans, sizeof(ans)) < 0) { -#ifdef DEBUG - perror("SIOCATMARK Failed"); -#endif - } - return ans; -} - -void read_oob(int fd, char *c) -{ - - *c = ' '; - if (recv(fd, c, sizeof(*c), MSG_OOB) < 0) { -#ifdef DEBUG - perror("Reading MSG_OOB Failed"); -#endif - } -} - -int read_data(int pfd, char *buf, int size) -{ - int len = 0; - - memset(buf, size, '0'); - len = read(pfd, buf, size); -#ifdef DEBUG - if (len < 0) - perror("read failed"); -#endif - return len; -} - -static void wait_for_data(int pfd, int event) -{ - struct pollfd pfds[1]; - - pfds[0].fd = pfd; - pfds[0].events = event; - poll(pfds, 1, -1); -} - -void producer(struct sockaddr_un *consumer_addr) -{ - int cfd; - char buf[64]; - int i; - - memset(buf, 'x', sizeof(buf)); - cfd = socket(AF_UNIX, SOCK_STREAM, 0); - - wait_for_signal(pipefd[0]); - if (connect(cfd, (struct sockaddr *)consumer_addr, - sizeof(*consumer_addr)) != 0) { - perror("Connect failed"); - kill(0, SIGTERM); - exit(1); - } - - for (i = 0; i < 2; i++) { - /* Test 1: Test for SIGURG and OOB */ - wait_for_signal(pipefd[0]); - memset(buf, 'x', sizeof(buf)); - buf[63] = '@'; - send(cfd, buf, sizeof(buf), MSG_OOB); - - wait_for_signal(pipefd[0]); - - /* Test 2: Test for OOB being overwitten */ - memset(buf, 'x', sizeof(buf)); - buf[63] = '%'; - send(cfd, buf, sizeof(buf), MSG_OOB); - - memset(buf, 'x', sizeof(buf)); - buf[63] = '#'; - send(cfd, buf, sizeof(buf), MSG_OOB); - - wait_for_signal(pipefd[0]); - - /* Test 3: Test for SIOCATMARK */ - memset(buf, 'x', sizeof(buf)); - buf[63] = '@'; - send(cfd, buf, sizeof(buf), MSG_OOB); - - memset(buf, 'x', sizeof(buf)); - buf[63] = '%'; - send(cfd, buf, sizeof(buf), MSG_OOB); - - memset(buf, 'x', sizeof(buf)); - send(cfd, buf, sizeof(buf), 0); - - wait_for_signal(pipefd[0]); - - /* Test 4: Test for 1byte OOB msg */ - memset(buf, 'x', sizeof(buf)); - buf[0] = '@'; - send(cfd, buf, 1, MSG_OOB); - } -} - -int -main(int argc, char **argv) -{ - int lfd, pfd; - struct sockaddr_un consumer_addr, paddr; - socklen_t len = sizeof(consumer_addr); - char buf[1024]; - int on = 0; - char oob; - int atmark; - - lfd = socket(AF_UNIX, SOCK_STREAM, 0); - memset(&consumer_addr, 0, sizeof(consumer_addr)); - consumer_addr.sun_family = AF_UNIX; - sprintf(sock_name, "unix_oob_%d", getpid()); - unlink(sock_name); - strcpy(consumer_addr.sun_path, sock_name); - - if ((bind(lfd, (struct sockaddr *)&consumer_addr, - sizeof(consumer_addr))) != 0) { - perror("socket bind failed"); - exit(1); - } - - pipe(pipefd); - - listen(lfd, 1); - - producer_id = fork(); - if (producer_id == 0) { - producer(&consumer_addr); - exit(0); - } - - set_sig_handler(SIGURG); - signal_producer(pipefd[1]); - - pfd = accept(lfd, (struct sockaddr *) &paddr, &len); - fcntl(pfd, F_SETOWN, getpid()); - - signal_recvd = 0; - signal_producer(pipefd[1]); - - /* Test 1: - * veriyf that SIGURG is - * delivered, 63 bytes are - * read, oob is '@', and POLLPRI works. - */ - wait_for_data(pfd, POLLPRI); - read_oob(pfd, &oob); - len = read_data(pfd, buf, 1024); - if (!signal_recvd || len != 63 || oob != '@') { - fprintf(stderr, "Test 1 failed sigurg %d len %d %c\n", - signal_recvd, len, oob); - die(1); - } - - signal_recvd = 0; - signal_producer(pipefd[1]); - - /* Test 2: - * Verify that the first OOB is over written by - * the 2nd one and the first OOB is returned as - * part of the read, and sigurg is received. - */ - wait_for_data(pfd, POLLIN | POLLPRI); - len = 0; - while (len < 70) - len = recv(pfd, buf, 1024, MSG_PEEK); - len = read_data(pfd, buf, 1024); - read_oob(pfd, &oob); - if (!signal_recvd || len != 127 || oob != '#') { - fprintf(stderr, "Test 2 failed, sigurg %d len %d OOB %c\n", - signal_recvd, len, oob); - die(1); - } - - signal_recvd = 0; - signal_producer(pipefd[1]); - - /* Test 3: - * verify that 2nd oob over writes - * the first one and read breaks at - * oob boundary returning 127 bytes - * and sigurg is received and atmark - * is set. - * oob is '%' and second read returns - * 64 bytes. - */ - len = 0; - wait_for_data(pfd, POLLIN | POLLPRI); - while (len < 150) - len = recv(pfd, buf, 1024, MSG_PEEK); - len = read_data(pfd, buf, 1024); - atmark = is_sioctatmark(pfd); - read_oob(pfd, &oob); - - if (!signal_recvd || len != 127 || oob != '%' || atmark != 1) { - fprintf(stderr, - "Test 3 failed, sigurg %d len %d OOB %c atmark %d\n", - signal_recvd, len, oob, atmark); - die(1); - } - - signal_recvd = 0; - - len = read_data(pfd, buf, 1024); - if (len != 64) { - fprintf(stderr, "Test 3.1 failed, sigurg %d len %d OOB %c\n", - signal_recvd, len, oob); - die(1); - } - - signal_recvd = 0; - signal_producer(pipefd[1]); - - /* Test 4: - * verify that a single byte - * oob message is delivered. - * set non blocking mode and - * check proper error is - * returned and sigurg is - * received and correct - * oob is read. - */ - - set_filemode(pfd, 0); - - wait_for_data(pfd, POLLIN | POLLPRI); - len = read_data(pfd, buf, 1024); - if ((len == -1) && (errno == 11)) - len = 0; - - read_oob(pfd, &oob); - - if (!signal_recvd || len != 0 || oob != '@') { - fprintf(stderr, "Test 4 failed, sigurg %d len %d OOB %c\n", - signal_recvd, len, oob); - die(1); - } - - set_filemode(pfd, 1); - - /* Inline Testing */ - - on = 1; - if (setsockopt(pfd, SOL_SOCKET, SO_OOBINLINE, &on, sizeof(on))) { - perror("SO_OOBINLINE"); - die(1); - } - - signal_recvd = 0; - signal_producer(pipefd[1]); - - /* Test 1 -- Inline: - * Check that SIGURG is - * delivered and 63 bytes are - * read and oob is '@' - */ - - wait_for_data(pfd, POLLIN | POLLPRI); - len = read_data(pfd, buf, 1024); - - if (!signal_recvd || len != 63) { - fprintf(stderr, "Test 1 Inline failed, sigurg %d len %d\n", - signal_recvd, len); - die(1); - } - - len = read_data(pfd, buf, 1024); - - if (len != 1) { - fprintf(stderr, - "Test 1.1 Inline failed, sigurg %d len %d oob %c\n", - signal_recvd, len, oob); - die(1); - } - - signal_recvd = 0; - signal_producer(pipefd[1]); - - /* Test 2 -- Inline: - * Verify that the first OOB is over written by - * the 2nd one and read breaks correctly on - * 2nd OOB boundary with the first OOB returned as - * part of the read, and sigurg is delivered and - * siocatmark returns true. - * next read returns one byte, the oob byte - * and siocatmark returns false. - */ - len = 0; - wait_for_data(pfd, POLLIN | POLLPRI); - while (len < 70) - len = recv(pfd, buf, 1024, MSG_PEEK); - len = read_data(pfd, buf, 1024); - atmark = is_sioctatmark(pfd); - if (len != 127 || atmark != 1 || !signal_recvd) { - fprintf(stderr, "Test 2 Inline failed, len %d atmark %d\n", - len, atmark); - die(1); - } - - len = read_data(pfd, buf, 1024); - atmark = is_sioctatmark(pfd); - if (len != 1 || buf[0] != '#' || atmark == 1) { - fprintf(stderr, "Test 2.1 Inline failed, len %d data %c atmark %d\n", - len, buf[0], atmark); - die(1); - } - - signal_recvd = 0; - signal_producer(pipefd[1]); - - /* Test 3 -- Inline: - * verify that 2nd oob over writes - * the first one and read breaks at - * oob boundary returning 127 bytes - * and sigurg is received and siocatmark - * is true after the read. - * subsequent read returns 65 bytes - * because of oob which should be '%'. - */ - len = 0; - wait_for_data(pfd, POLLIN | POLLPRI); - while (len < 126) - len = recv(pfd, buf, 1024, MSG_PEEK); - len = read_data(pfd, buf, 1024); - atmark = is_sioctatmark(pfd); - if (!signal_recvd || len != 127 || !atmark) { - fprintf(stderr, - "Test 3 Inline failed, sigurg %d len %d data %c\n", - signal_recvd, len, buf[0]); - die(1); - } - - len = read_data(pfd, buf, 1024); - atmark = is_sioctatmark(pfd); - if (len != 65 || buf[0] != '%' || atmark != 0) { - fprintf(stderr, - "Test 3.1 Inline failed, len %d oob %c atmark %d\n", - len, buf[0], atmark); - die(1); - } - - signal_recvd = 0; - signal_producer(pipefd[1]); - - /* Test 4 -- Inline: - * verify that a single - * byte oob message is delivered - * and read returns one byte, the oob - * byte and sigurg is received - */ - wait_for_data(pfd, POLLIN | POLLPRI); - len = read_data(pfd, buf, 1024); - if (!signal_recvd || len != 1 || buf[0] != '@') { - fprintf(stderr, - "Test 4 Inline failed, signal %d len %d data %c\n", - signal_recvd, len, buf[0]); - die(1); - } - die(0); -} diff --git a/tools/testing/selftests/net/bpf.mk b/tools/testing/selftests/net/bpf.mk new file mode 100644 index 0000000000..a4f6755dd8 --- /dev/null +++ b/tools/testing/selftests/net/bpf.mk @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0 +# Rules to generate bpf objs +CLANG ?= clang +SCRATCH_DIR := $(OUTPUT)/tools +BUILD_DIR := $(SCRATCH_DIR)/build +BPFDIR := $(top_srcdir)/tools/lib/bpf +APIDIR := $(top_srcdir)/tools/include/uapi + +CCINCLUDE += -I$(selfdir)/bpf +CCINCLUDE += -I$(top_srcdir)/usr/include/ +CCINCLUDE += -I$(SCRATCH_DIR)/include + +BPFOBJ := $(BUILD_DIR)/libbpf/libbpf.a + +MAKE_DIRS := $(BUILD_DIR)/libbpf +$(MAKE_DIRS): + $(call msg,MKDIR,,$@) + $(Q)mkdir -p $@ + +# Get Clang's default includes on this system, as opposed to those seen by +# '--target=bpf'. This fixes "missing" files on some architectures/distros, +# such as asm/byteorder.h, asm/socket.h, asm/sockios.h, sys/cdefs.h etc. +# +# Use '-idirafter': Don't interfere with include mechanics except where the +# build would have failed anyways. +define get_sys_includes +$(shell $(1) $(2) -v -E - </dev/null 2>&1 \ + | sed -n '/<...> search starts here:/,/End of search list./{ s| \(/.*\)|-idirafter \1|p }') \ +$(shell $(1) $(2) -dM -E - </dev/null | grep '__riscv_xlen ' | awk '{printf("-D__riscv_xlen=%d -D__BITS_PER_LONG=%d", $$3, $$3)}') +endef + +ifneq ($(CROSS_COMPILE),) +CLANG_TARGET_ARCH = --target=$(notdir $(CROSS_COMPILE:%-=%)) +endif + +CLANG_SYS_INCLUDES = $(call get_sys_includes,$(CLANG),$(CLANG_TARGET_ARCH)) + +BPF_PROG_OBJS := $(patsubst %.c,$(OUTPUT)/%.o,$(wildcard *.bpf.c)) + +$(BPF_PROG_OBJS): $(OUTPUT)/%.o : %.c $(BPFOBJ) | $(MAKE_DIRS) + $(call msg,BPF_PROG,,$@) + $(Q)$(CLANG) -O2 -g --target=bpf $(CCINCLUDE) $(CLANG_SYS_INCLUDES) \ + -c $< -o $@ + +$(BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile) \ + $(APIDIR)/linux/bpf.h \ + | $(BUILD_DIR)/libbpf + $(call msg,MAKE,,$@) + $(Q)$(MAKE) $(submake_extras) -C $(BPFDIR) OUTPUT=$(BUILD_DIR)/libbpf/ \ + EXTRA_CFLAGS='-g -O0' \ + DESTDIR=$(SCRATCH_DIR) prefix= all install_headers + +EXTRA_CLEAN += $(SCRATCH_DIR) diff --git a/tools/testing/selftests/net/bpf_offload.py b/tools/testing/selftests/net/bpf_offload.py new file mode 100755 index 0000000000..3efe44f6e9 --- /dev/null +++ b/tools/testing/selftests/net/bpf_offload.py @@ -0,0 +1,1341 @@ +#!/usr/bin/env python3 + +# Copyright (C) 2017 Netronome Systems, Inc. +# Copyright (c) 2019 Mellanox Technologies. All rights reserved +# +# This software is licensed under the GNU General License Version 2, +# June 1991 as shown in the file COPYING in the top-level directory of this +# source tree. +# +# THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" +# WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, +# BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE +# OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME +# THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + +from datetime import datetime +import argparse +import errno +import json +import os +import pprint +import random +import re +import stat +import string +import struct +import subprocess +import time +import traceback + +from lib.py import NetdevSim, NetdevSimDev + + +logfile = None +log_level = 1 +skip_extack = False +bpf_test_dir = os.path.dirname(os.path.realpath(__file__)) +pp = pprint.PrettyPrinter() +devs = [] # devices we created for clean up +files = [] # files to be removed +netns = [] # net namespaces to be removed + +def log_get_sec(level=0): + return "*" * (log_level + level) + +def log_level_inc(add=1): + global log_level + log_level += add + +def log_level_dec(sub=1): + global log_level + log_level -= sub + +def log_level_set(level): + global log_level + log_level = level + +def log(header, data, level=None): + """ + Output to an optional log. + """ + if logfile is None: + return + if level is not None: + log_level_set(level) + + if not isinstance(data, str): + data = pp.pformat(data) + + if len(header): + logfile.write("\n" + log_get_sec() + " ") + logfile.write(header) + if len(header) and len(data.strip()): + logfile.write("\n") + logfile.write(data) + +def skip(cond, msg): + if not cond: + return + print("SKIP: " + msg) + log("SKIP: " + msg, "", level=1) + os.sys.exit(0) + +def fail(cond, msg): + if not cond: + return + print("FAIL: " + msg) + tb = "".join(traceback.extract_stack().format()) + print(tb) + log("FAIL: " + msg, tb, level=1) + os.sys.exit(1) + +def start_test(msg): + log(msg, "", level=1) + log_level_inc() + print(msg) + +def cmd(cmd, shell=True, include_stderr=False, background=False, fail=True): + """ + Run a command in subprocess and return tuple of (retval, stdout); + optionally return stderr as well as third value. + """ + proc = subprocess.Popen(cmd, shell=shell, stdout=subprocess.PIPE, + stderr=subprocess.PIPE) + if background: + msg = "%s START: %s" % (log_get_sec(1), + datetime.now().strftime("%H:%M:%S.%f")) + log("BKG " + proc.args, msg) + return proc + + return cmd_result(proc, include_stderr=include_stderr, fail=fail) + +def cmd_result(proc, include_stderr=False, fail=False): + stdout, stderr = proc.communicate() + stdout = stdout.decode("utf-8") + stderr = stderr.decode("utf-8") + proc.stdout.close() + proc.stderr.close() + + stderr = "\n" + stderr + if stderr[-1] == "\n": + stderr = stderr[:-1] + + sec = log_get_sec(1) + log("CMD " + proc.args, + "RETCODE: %d\n%s STDOUT:\n%s%s STDERR:%s\n%s END: %s" % + (proc.returncode, sec, stdout, sec, stderr, + sec, datetime.now().strftime("%H:%M:%S.%f"))) + + if proc.returncode != 0 and fail: + if len(stderr) > 0 and stderr[-1] == "\n": + stderr = stderr[:-1] + raise Exception("Command failed: %s\n%s" % (proc.args, stderr)) + + if include_stderr: + return proc.returncode, stdout, stderr + else: + return proc.returncode, stdout + +def rm(f): + cmd("rm -f %s" % (f)) + if f in files: + files.remove(f) + +def tool(name, args, flags, JSON=True, ns="", fail=True, include_stderr=False): + params = "" + if JSON: + params += "%s " % (flags["json"]) + + if ns: + ns = "ip netns exec %s " % (ns) + elif ns is None: + ns = "" + + if include_stderr: + ret, stdout, stderr = cmd(ns + name + " " + params + args, + fail=fail, include_stderr=True) + else: + ret, stdout = cmd(ns + name + " " + params + args, + fail=fail, include_stderr=False) + + if JSON and len(stdout.strip()) != 0: + out = json.loads(stdout) + else: + out = stdout + + if include_stderr: + return ret, out, stderr + else: + return ret, out + +def bpftool(args, JSON=True, ns="", fail=True, include_stderr=False): + return tool("bpftool", args, {"json":"-p"}, JSON=JSON, ns=ns, + fail=fail, include_stderr=include_stderr) + +def bpftool_prog_list(expected=None, ns="", exclude_orphaned=True): + _, progs = bpftool("prog show", JSON=True, ns=ns, fail=True) + # Remove the base progs + for p in base_progs: + if p in progs: + progs.remove(p) + if exclude_orphaned: + progs = [ p for p in progs if not p['orphaned'] ] + if expected is not None: + if len(progs) != expected: + fail(True, "%d BPF programs loaded, expected %d" % + (len(progs), expected)) + return progs + +def bpftool_map_list(expected=None, ns=""): + _, maps = bpftool("map show", JSON=True, ns=ns, fail=True) + # Remove the base maps + maps = [m for m in maps if m not in base_maps and m.get('name') and m.get('name') not in base_map_names] + if expected is not None: + if len(maps) != expected: + fail(True, "%d BPF maps loaded, expected %d" % + (len(maps), expected)) + return maps + +def bpftool_prog_list_wait(expected=0, n_retry=20): + for i in range(n_retry): + nprogs = len(bpftool_prog_list()) + if nprogs == expected: + return + time.sleep(0.05) + raise Exception("Time out waiting for program counts to stabilize want %d, have %d" % (expected, nprogs)) + +def bpftool_map_list_wait(expected=0, n_retry=20, ns=""): + for i in range(n_retry): + maps = bpftool_map_list(ns=ns) + if len(maps) == expected: + return maps + time.sleep(0.05) + raise Exception("Time out waiting for map counts to stabilize want %d, have %d" % (expected, nmaps)) + +def bpftool_prog_load(sample, file_name, maps=[], prog_type="xdp", dev=None, + fail=True, include_stderr=False): + args = "prog load %s %s" % (os.path.join(bpf_test_dir, sample), file_name) + if prog_type is not None: + args += " type " + prog_type + if dev is not None: + args += " dev " + dev + if len(maps): + args += " map " + " map ".join(maps) + + res = bpftool(args, fail=fail, include_stderr=include_stderr) + if res[0] == 0: + files.append(file_name) + return res + +def ip(args, force=False, JSON=True, ns="", fail=True, include_stderr=False): + if force: + args = "-force " + args + return tool("ip", args, {"json":"-j"}, JSON=JSON, ns=ns, + fail=fail, include_stderr=include_stderr) + +def tc(args, JSON=True, ns="", fail=True, include_stderr=False): + return tool("tc", args, {"json":"-p"}, JSON=JSON, ns=ns, + fail=fail, include_stderr=include_stderr) + +def ethtool(dev, opt, args, fail=True): + return cmd("ethtool %s %s %s" % (opt, dev["ifname"], args), fail=fail) + +def bpf_obj(name, sec="xdp", path=bpf_test_dir,): + return "obj %s sec %s" % (os.path.join(path, name), sec) + +def bpf_pinned(name): + return "pinned %s" % (name) + +def bpf_bytecode(bytecode): + return "bytecode \"%s\"" % (bytecode) + +def mknetns(n_retry=10): + for i in range(n_retry): + name = ''.join([random.choice(string.ascii_letters) for i in range(8)]) + ret, _ = ip("netns add %s" % (name), fail=False) + if ret == 0: + netns.append(name) + return name + return None + +def int2str(fmt, val): + ret = [] + for b in struct.pack(fmt, val): + ret.append(int(b)) + return " ".join(map(lambda x: str(x), ret)) + +def str2int(strtab): + inttab = [] + for i in strtab: + inttab.append(int(i, 16)) + ba = bytearray(inttab) + if len(strtab) == 4: + fmt = "I" + elif len(strtab) == 8: + fmt = "Q" + else: + raise Exception("String array of len %d can't be unpacked to an int" % + (len(strtab))) + return struct.unpack(fmt, ba)[0] + +class DebugfsDir: + """ + Class for accessing DebugFS directories as a dictionary. + """ + + def __init__(self, path): + self.path = path + self._dict = self._debugfs_dir_read(path) + + def __len__(self): + return len(self._dict.keys()) + + def __getitem__(self, key): + if type(key) is int: + key = list(self._dict.keys())[key] + return self._dict[key] + + def __setitem__(self, key, value): + log("DebugFS set %s = %s" % (key, value), "") + log_level_inc() + + cmd("echo '%s' > %s/%s" % (value, self.path, key)) + log_level_dec() + + _, out = cmd('cat %s/%s' % (self.path, key)) + self._dict[key] = out.strip() + + def _debugfs_dir_read(self, path): + dfs = {} + + log("DebugFS state for %s" % (path), "") + log_level_inc(add=2) + + _, out = cmd('ls ' + path) + for f in out.split(): + if f == "ports": + continue + + p = os.path.join(path, f) + if not os.stat(p).st_mode & stat.S_IRUSR: + continue + + if os.path.isfile(p): + # We need to init trap_flow_action_cookie before read it + if f == "trap_flow_action_cookie": + cmd('echo deadbeef > %s/%s' % (path, f)) + _, out = cmd('cat %s/%s' % (path, f)) + dfs[f] = out.strip() + elif os.path.isdir(p): + dfs[f] = DebugfsDir(p) + else: + raise Exception("%s is neither file nor directory" % (p)) + + log_level_dec() + log("DebugFS state", dfs) + log_level_dec() + + return dfs + +class BpfNetdevSimDev(NetdevSimDev): + """ + Class for netdevsim bus device and its attributes. + """ + def __init__(self, port_count=1, ns=None): + super().__init__(port_count, ns=ns) + devs.append(self) + + def _make_port(self, port_index, ifname): + return BpfNetdevSim(self, port_index, ifname, self.ns) + + def dfs_num_bound_progs(self): + path = os.path.join(self.dfs_dir, "bpf_bound_progs") + _, progs = cmd('ls %s' % (path)) + return len(progs.split()) + + def dfs_get_bound_progs(self, expected): + progs = DebugfsDir(os.path.join(self.dfs_dir, "bpf_bound_progs")) + if expected is not None: + if len(progs) != expected: + fail(True, "%d BPF programs bound, expected %d" % + (len(progs), expected)) + return progs + + def remove(self): + super().remove() + devs.remove(self) + + +class BpfNetdevSim(NetdevSim): + """ + Class for netdevsim netdevice and its attributes. + """ + + def __init__(self, nsimdev, port_index, ifname, ns=None): + super().__init__(nsimdev, port_index, ifname, ns=ns) + + self.dfs_dir = "%s/ports/%u/" % (nsimdev.dfs_dir, port_index) + self.dfs_refresh() + + def __getitem__(self, key): + return self.dev[key] + + def remove(self): + self.nsimdev.remove_nsim(self) + + def dfs_refresh(self): + self.dfs = DebugfsDir(self.dfs_dir) + return self.dfs + + def dfs_read(self, f): + path = os.path.join(self.dfs_dir, f) + _, data = cmd('cat %s' % (path)) + return data.strip() + + def wait_for_flush(self, bound=0, total=0, n_retry=20): + for i in range(n_retry): + nbound = self.nsimdev.dfs_num_bound_progs() + nprogs = len(bpftool_prog_list()) + if nbound == bound and nprogs == total: + return + time.sleep(0.05) + raise Exception("Time out waiting for program counts to stabilize want %d/%d, have %d bound, %d loaded" % (bound, total, nbound, nprogs)) + + def set_ns(self, ns): + name = ns if ns else "1" + ip("link set dev %s netns %s" % (self.dev["ifname"], name), ns=self.ns) + self.ns = ns + + def set_mtu(self, mtu, fail=True): + return ip("link set dev %s mtu %d" % (self.dev["ifname"], mtu), + fail=fail) + + def set_xdp(self, bpf, mode, force=False, JSON=True, verbose=False, + fail=True, include_stderr=False): + if verbose: + bpf += " verbose" + return ip("link set dev %s xdp%s %s" % (self.dev["ifname"], mode, bpf), + force=force, JSON=JSON, + fail=fail, include_stderr=include_stderr) + + def unset_xdp(self, mode, force=False, JSON=True, + fail=True, include_stderr=False): + return ip("link set dev %s xdp%s off" % (self.dev["ifname"], mode), + force=force, JSON=JSON, + fail=fail, include_stderr=include_stderr) + + def ip_link_show(self, xdp): + _, link = ip("link show dev %s" % (self['ifname'])) + if len(link) > 1: + raise Exception("Multiple objects on ip link show") + if len(link) < 1: + return {} + fail(xdp != "xdp" in link, + "XDP program not reporting in iplink (reported %s, expected %s)" % + ("xdp" in link, xdp)) + return link[0] + + def tc_add_ingress(self): + tc("qdisc add dev %s ingress" % (self['ifname'])) + + def tc_del_ingress(self): + tc("qdisc del dev %s ingress" % (self['ifname'])) + + def tc_flush_filters(self, bound=0, total=0): + self.tc_del_ingress() + self.tc_add_ingress() + self.wait_for_flush(bound=bound, total=total) + + def tc_show_ingress(self, expected=None): + # No JSON support, oh well... + flags = ["skip_sw", "skip_hw", "in_hw"] + named = ["protocol", "pref", "chain", "handle", "id", "tag"] + + args = "-s filter show dev %s ingress" % (self['ifname']) + _, out = tc(args, JSON=False) + + filters = [] + lines = out.split('\n') + for line in lines: + words = line.split() + if "handle" not in words: + continue + fltr = {} + for flag in flags: + fltr[flag] = flag in words + for name in named: + try: + idx = words.index(name) + fltr[name] = words[idx + 1] + except ValueError: + pass + filters.append(fltr) + + if expected is not None: + fail(len(filters) != expected, + "%d ingress filters loaded, expected %d" % + (len(filters), expected)) + return filters + + def cls_filter_op(self, op, qdisc="ingress", prio=None, handle=None, + chain=None, cls="", params="", + fail=True, include_stderr=False): + spec = "" + if prio is not None: + spec += " prio %d" % (prio) + if handle: + spec += " handle %s" % (handle) + if chain is not None: + spec += " chain %d" % (chain) + + return tc("filter {op} dev {dev} {qdisc} {spec} {cls} {params}"\ + .format(op=op, dev=self['ifname'], qdisc=qdisc, spec=spec, + cls=cls, params=params), + fail=fail, include_stderr=include_stderr) + + def cls_bpf_add_filter(self, bpf, op="add", prio=None, handle=None, + chain=None, da=False, verbose=False, + skip_sw=False, skip_hw=False, + fail=True, include_stderr=False): + cls = "bpf " + bpf + + params = "" + if da: + params += " da" + if verbose: + params += " verbose" + if skip_sw: + params += " skip_sw" + if skip_hw: + params += " skip_hw" + + return self.cls_filter_op(op=op, prio=prio, handle=handle, cls=cls, + chain=chain, params=params, + fail=fail, include_stderr=include_stderr) + + def set_ethtool_tc_offloads(self, enable, fail=True): + args = "hw-tc-offload %s" % ("on" if enable else "off") + return ethtool(self, "-K", args, fail=fail) + +################################################################################ +def clean_up(): + global files, netns, devs + + for dev in devs: + dev.remove() + for f in files: + cmd("rm -f %s" % (f)) + for ns in netns: + cmd("ip netns delete %s" % (ns)) + files = [] + netns = [] + +def pin_prog(file_name, idx=0): + progs = bpftool_prog_list(expected=(idx + 1)) + prog = progs[idx] + bpftool("prog pin id %d %s" % (prog["id"], file_name)) + files.append(file_name) + + return file_name, bpf_pinned(file_name) + +def pin_map(file_name, idx=0, expected=1): + maps = bpftool_map_list_wait(expected=expected) + m = maps[idx] + bpftool("map pin id %d %s" % (m["id"], file_name)) + files.append(file_name) + + return file_name, bpf_pinned(file_name) + +def check_dev_info_removed(prog_file=None, map_file=None): + bpftool_prog_list(expected=0) + bpftool_prog_list(expected=1, exclude_orphaned=False) + ret, err = bpftool("prog show pin %s" % (prog_file), fail=False) + fail(ret != 0, "failed to show prog with removed device") + + bpftool_map_list_wait(expected=0) + ret, err = bpftool("map show pin %s" % (map_file), fail=False) + fail(ret == 0, "Showing map with removed device did not fail") + fail(err["error"].find("No such device") == -1, + "Showing map with removed device expected ENODEV, error is %s" % + (err["error"])) + +def check_dev_info(other_ns, ns, prog_file=None, map_file=None, removed=False): + progs = bpftool_prog_list(expected=1, ns=ns) + prog = progs[0] + + fail("dev" not in prog.keys(), "Device parameters not reported") + dev = prog["dev"] + fail("ifindex" not in dev.keys(), "Device parameters not reported") + fail("ns_dev" not in dev.keys(), "Device parameters not reported") + fail("ns_inode" not in dev.keys(), "Device parameters not reported") + + if not other_ns: + fail("ifname" not in dev.keys(), "Ifname not reported") + fail(dev["ifname"] != sim["ifname"], + "Ifname incorrect %s vs %s" % (dev["ifname"], sim["ifname"])) + else: + fail("ifname" in dev.keys(), "Ifname is reported for other ns") + + maps = bpftool_map_list_wait(expected=2, ns=ns) + for m in maps: + fail("dev" not in m.keys(), "Device parameters not reported") + fail(dev != m["dev"], "Map's device different than program's") + +def check_extack(output, reference, args): + if skip_extack: + return + lines = output.split("\n") + comp = len(lines) >= 2 and lines[1] == 'Error: ' + reference + fail(not comp, "Missing or incorrect netlink extack message") + +def check_extack_nsim(output, reference, args): + check_extack(output, "netdevsim: " + reference, args) + +def check_no_extack(res, needle): + fail((res[1] + res[2]).count(needle) or (res[1] + res[2]).count("Warning:"), + "Found '%s' in command output, leaky extack?" % (needle)) + +def check_verifier_log(output, reference): + lines = output.split("\n") + for l in reversed(lines): + if l == reference: + return + fail(True, "Missing or incorrect message from netdevsim in verifier log") + +def check_multi_basic(two_xdps): + fail(two_xdps["mode"] != 4, "Bad mode reported with multiple programs") + fail("prog" in two_xdps, "Base program reported in multi program mode") + fail(len(two_xdps["attached"]) != 2, + "Wrong attached program count with two programs") + fail(two_xdps["attached"][0]["prog"]["id"] == + two_xdps["attached"][1]["prog"]["id"], + "Offloaded and other programs have the same id") + +def test_spurios_extack(sim, obj, skip_hw, needle): + res = sim.cls_bpf_add_filter(obj, prio=1, handle=1, skip_hw=skip_hw, + include_stderr=True) + check_no_extack(res, needle) + res = sim.cls_bpf_add_filter(obj, op="replace", prio=1, handle=1, + skip_hw=skip_hw, include_stderr=True) + check_no_extack(res, needle) + res = sim.cls_filter_op(op="delete", prio=1, handle=1, cls="bpf", + include_stderr=True) + check_no_extack(res, needle) + +def test_multi_prog(simdev, sim, obj, modename, modeid): + start_test("Test multi-attachment XDP - %s + offload..." % + (modename or "default", )) + sim.set_xdp(obj, "offload") + xdp = sim.ip_link_show(xdp=True)["xdp"] + offloaded = sim.dfs_read("bpf_offloaded_id") + fail("prog" not in xdp, "Base program not reported in single program mode") + fail(len(xdp["attached"]) != 1, + "Wrong attached program count with one program") + + sim.set_xdp(obj, modename) + two_xdps = sim.ip_link_show(xdp=True)["xdp"] + + fail(xdp["attached"][0] not in two_xdps["attached"], + "Offload program not reported after other activated") + check_multi_basic(two_xdps) + + offloaded2 = sim.dfs_read("bpf_offloaded_id") + fail(offloaded != offloaded2, + "Offload ID changed after loading other program") + + start_test("Test multi-attachment XDP - replace...") + ret, _, err = sim.set_xdp(obj, "offload", fail=False, include_stderr=True) + fail(ret == 0, "Replaced one of programs without -force") + check_extack(err, "XDP program already attached.", args) + + start_test("Test multi-attachment XDP - remove without mode...") + ret, _, err = sim.unset_xdp("", force=True, + fail=False, include_stderr=True) + fail(ret == 0, "Removed program without a mode flag") + check_extack(err, "More than one program loaded, unset mode is ambiguous.", args) + + sim.unset_xdp("offload") + xdp = sim.ip_link_show(xdp=True)["xdp"] + offloaded = sim.dfs_read("bpf_offloaded_id") + + fail(xdp["mode"] != modeid, "Bad mode reported after multiple programs") + fail("prog" not in xdp, + "Base program not reported after multi program mode") + fail(xdp["attached"][0] not in two_xdps["attached"], + "Offload program not reported after other activated") + fail(len(xdp["attached"]) != 1, + "Wrong attached program count with remaining programs") + fail(offloaded != "0", "Offload ID reported with only other program left") + + start_test("Test multi-attachment XDP - reattach...") + sim.set_xdp(obj, "offload") + two_xdps = sim.ip_link_show(xdp=True)["xdp"] + + fail(xdp["attached"][0] not in two_xdps["attached"], + "Other program not reported after offload activated") + check_multi_basic(two_xdps) + + start_test("Test multi-attachment XDP - device remove...") + simdev.remove() + + simdev = BpfNetdevSimDev() + sim, = simdev.nsims + sim.set_ethtool_tc_offloads(True) + return [simdev, sim] + +# Parse command line +parser = argparse.ArgumentParser() +parser.add_argument("--log", help="output verbose log to given file") +args = parser.parse_args() +if args.log: + logfile = open(args.log, 'w+') + logfile.write("# -*-Org-*-") + +log("Prepare...", "", level=1) +log_level_inc() + +# Check permissions +skip(os.getuid() != 0, "test must be run as root") + +# Check tools +ret, progs = bpftool("prog", fail=False) +skip(ret != 0, "bpftool not installed") +base_progs = progs +_, base_maps = bpftool("map") +base_map_names = [ + 'pid_iter.rodata', # created on each bpftool invocation + 'libbpf_det_bind', # created on each bpftool invocation +] + +# Check netdevsim +if not os.path.isdir("/sys/bus/netdevsim/"): + ret, out = cmd("modprobe netdevsim", fail=False) + skip(ret != 0, "netdevsim module could not be loaded") + +# Check debugfs +_, out = cmd("mount") +if out.find("/sys/kernel/debug type debugfs") == -1: + cmd("mount -t debugfs none /sys/kernel/debug") + +# Check samples are compiled +samples = ["sample_ret0.bpf.o", "sample_map_ret0.bpf.o"] +for s in samples: + ret, out = cmd("ls %s/%s" % (bpf_test_dir, s), fail=False) + skip(ret != 0, "sample %s/%s not found, please compile it" % + (bpf_test_dir, s)) + +# Check if iproute2 is built with libmnl (needed by extack support) +_, _, err = cmd("tc qdisc delete dev lo handle 0", + fail=False, include_stderr=True) +if err.find("Error: Failed to find qdisc with specified handle.") == -1: + print("Warning: no extack message in iproute2 output, libmnl missing?") + log("Warning: no extack message in iproute2 output, libmnl missing?", "") + skip_extack = True + +# Check if net namespaces seem to work +ns = mknetns() +skip(ns is None, "Could not create a net namespace") +cmd("ip netns delete %s" % (ns)) +netns = [] + +try: + obj = bpf_obj("sample_ret0.bpf.o") + bytecode = bpf_bytecode("1,6 0 0 4294967295,") + + start_test("Test destruction of generic XDP...") + simdev = BpfNetdevSimDev() + sim, = simdev.nsims + sim.set_xdp(obj, "generic") + simdev.remove() + bpftool_prog_list_wait(expected=0) + + simdev = BpfNetdevSimDev() + sim, = simdev.nsims + sim.tc_add_ingress() + + start_test("Test TC non-offloaded...") + ret, _ = sim.cls_bpf_add_filter(obj, skip_hw=True, fail=False) + fail(ret != 0, "Software TC filter did not load") + + start_test("Test TC non-offloaded isn't getting bound...") + ret, _ = sim.cls_bpf_add_filter(obj, fail=False) + fail(ret != 0, "Software TC filter did not load") + simdev.dfs_get_bound_progs(expected=0) + + sim.tc_flush_filters() + + start_test("Test TC offloads are off by default...") + ret, _, err = sim.cls_bpf_add_filter(obj, skip_sw=True, + fail=False, include_stderr=True) + fail(ret == 0, "TC filter loaded without enabling TC offloads") + check_extack(err, "TC offload is disabled on net device.", args) + sim.wait_for_flush() + + sim.set_ethtool_tc_offloads(True) + sim.dfs["bpf_tc_non_bound_accept"] = "Y" + + start_test("Test TC offload by default...") + ret, _ = sim.cls_bpf_add_filter(obj, fail=False) + fail(ret != 0, "Software TC filter did not load") + simdev.dfs_get_bound_progs(expected=0) + ingress = sim.tc_show_ingress(expected=1) + fltr = ingress[0] + fail(not fltr["in_hw"], "Filter not offloaded by default") + + sim.tc_flush_filters() + + start_test("Test TC cBPF bytcode tries offload by default...") + ret, _ = sim.cls_bpf_add_filter(bytecode, fail=False) + fail(ret != 0, "Software TC filter did not load") + simdev.dfs_get_bound_progs(expected=0) + ingress = sim.tc_show_ingress(expected=1) + fltr = ingress[0] + fail(not fltr["in_hw"], "Bytecode not offloaded by default") + + sim.tc_flush_filters() + sim.dfs["bpf_tc_non_bound_accept"] = "N" + + start_test("Test TC cBPF unbound bytecode doesn't offload...") + ret, _, err = sim.cls_bpf_add_filter(bytecode, skip_sw=True, + fail=False, include_stderr=True) + fail(ret == 0, "TC bytecode loaded for offload") + check_extack_nsim(err, "netdevsim configured to reject unbound programs.", + args) + sim.wait_for_flush() + + start_test("Test non-0 chain offload...") + ret, _, err = sim.cls_bpf_add_filter(obj, chain=1, prio=1, handle=1, + skip_sw=True, + fail=False, include_stderr=True) + fail(ret == 0, "Offloaded a filter to chain other than 0") + check_extack(err, "Driver supports only offload of chain 0.", args) + sim.tc_flush_filters() + + start_test("Test TC replace...") + sim.cls_bpf_add_filter(obj, prio=1, handle=1) + sim.cls_bpf_add_filter(obj, op="replace", prio=1, handle=1) + sim.cls_filter_op(op="delete", prio=1, handle=1, cls="bpf") + + sim.cls_bpf_add_filter(obj, prio=1, handle=1, skip_sw=True) + sim.cls_bpf_add_filter(obj, op="replace", prio=1, handle=1, skip_sw=True) + sim.cls_filter_op(op="delete", prio=1, handle=1, cls="bpf") + + sim.cls_bpf_add_filter(obj, prio=1, handle=1, skip_hw=True) + sim.cls_bpf_add_filter(obj, op="replace", prio=1, handle=1, skip_hw=True) + sim.cls_filter_op(op="delete", prio=1, handle=1, cls="bpf") + + start_test("Test TC replace bad flags...") + for i in range(3): + for j in range(3): + ret, _ = sim.cls_bpf_add_filter(obj, op="replace", prio=1, handle=1, + skip_sw=(j == 1), skip_hw=(j == 2), + fail=False) + fail(bool(ret) != bool(j), + "Software TC incorrect load in replace test, iteration %d" % + (j)) + sim.cls_filter_op(op="delete", prio=1, handle=1, cls="bpf") + + start_test("Test spurious extack from the driver...") + test_spurios_extack(sim, obj, False, "netdevsim") + test_spurios_extack(sim, obj, True, "netdevsim") + + sim.set_ethtool_tc_offloads(False) + + test_spurios_extack(sim, obj, False, "TC offload is disabled") + test_spurios_extack(sim, obj, True, "TC offload is disabled") + + sim.set_ethtool_tc_offloads(True) + + sim.tc_flush_filters() + + start_test("Test TC offloads failure...") + sim.dfs["dev/bpf_bind_verifier_accept"] = 0 + ret, _, err = sim.cls_bpf_add_filter(obj, verbose=True, skip_sw=True, + fail=False, include_stderr=True) + fail(ret == 0, "TC filter did not reject with TC offloads enabled") + check_verifier_log(err, "[netdevsim] Hello from netdevsim!") + sim.dfs["dev/bpf_bind_verifier_accept"] = 1 + + start_test("Test TC offloads work...") + ret, _, err = sim.cls_bpf_add_filter(obj, verbose=True, skip_sw=True, + fail=False, include_stderr=True) + fail(ret != 0, "TC filter did not load with TC offloads enabled") + + start_test("Test TC offload basics...") + dfs = simdev.dfs_get_bound_progs(expected=1) + progs = bpftool_prog_list(expected=1) + ingress = sim.tc_show_ingress(expected=1) + + dprog = dfs[0] + prog = progs[0] + fltr = ingress[0] + fail(fltr["skip_hw"], "TC does reports 'skip_hw' on offloaded filter") + fail(not fltr["in_hw"], "TC does not report 'in_hw' for offloaded filter") + fail(not fltr["skip_sw"], "TC does not report 'skip_sw' back") + + start_test("Test TC offload is device-bound...") + fail(str(prog["id"]) != fltr["id"], "Program IDs don't match") + fail(prog["tag"] != fltr["tag"], "Program tags don't match") + fail(fltr["id"] != dprog["id"], "Program IDs don't match") + fail(dprog["state"] != "xlated", "Offloaded program state not translated") + fail(dprog["loaded"] != "Y", "Offloaded program is not loaded") + + start_test("Test disabling TC offloads is rejected while filters installed...") + ret, _ = sim.set_ethtool_tc_offloads(False, fail=False) + fail(ret == 0, "Driver should refuse to disable TC offloads with filters installed...") + sim.set_ethtool_tc_offloads(True) + + start_test("Test qdisc removal frees things...") + sim.tc_flush_filters() + sim.tc_show_ingress(expected=0) + + start_test("Test disabling TC offloads is OK without filters...") + ret, _ = sim.set_ethtool_tc_offloads(False, fail=False) + fail(ret != 0, + "Driver refused to disable TC offloads without filters installed...") + + sim.set_ethtool_tc_offloads(True) + + start_test("Test destroying device gets rid of TC filters...") + sim.cls_bpf_add_filter(obj, skip_sw=True) + simdev.remove() + bpftool_prog_list_wait(expected=0) + + simdev = BpfNetdevSimDev() + sim, = simdev.nsims + sim.set_ethtool_tc_offloads(True) + + start_test("Test destroying device gets rid of XDP...") + sim.set_xdp(obj, "offload") + simdev.remove() + bpftool_prog_list_wait(expected=0) + + simdev = BpfNetdevSimDev() + sim, = simdev.nsims + sim.set_ethtool_tc_offloads(True) + + start_test("Test XDP prog reporting...") + sim.set_xdp(obj, "drv") + ipl = sim.ip_link_show(xdp=True) + progs = bpftool_prog_list(expected=1) + fail(ipl["xdp"]["prog"]["id"] != progs[0]["id"], + "Loaded program has wrong ID") + + start_test("Test XDP prog replace without force...") + ret, _ = sim.set_xdp(obj, "drv", fail=False) + fail(ret == 0, "Replaced XDP program without -force") + sim.wait_for_flush(total=1) + + start_test("Test XDP prog replace with force...") + ret, _ = sim.set_xdp(obj, "drv", force=True, fail=False) + fail(ret != 0, "Could not replace XDP program with -force") + bpftool_prog_list_wait(expected=1) + ipl = sim.ip_link_show(xdp=True) + progs = bpftool_prog_list(expected=1) + fail(ipl["xdp"]["prog"]["id"] != progs[0]["id"], + "Loaded program has wrong ID") + fail("dev" in progs[0].keys(), + "Device parameters reported for non-offloaded program") + + start_test("Test XDP prog replace with bad flags...") + ret, _, err = sim.set_xdp(obj, "generic", force=True, + fail=False, include_stderr=True) + fail(ret == 0, "Replaced XDP program with a program in different mode") + check_extack(err, + "Native and generic XDP can't be active at the same time.", + args) + + start_test("Test MTU restrictions...") + ret, _ = sim.set_mtu(9000, fail=False) + fail(ret == 0, + "Driver should refuse to increase MTU to 9000 with XDP loaded...") + sim.unset_xdp("drv") + bpftool_prog_list_wait(expected=0) + sim.set_mtu(9000) + ret, _, err = sim.set_xdp(obj, "drv", fail=False, include_stderr=True) + fail(ret == 0, "Driver should refuse to load program with MTU of 9000...") + check_extack_nsim(err, "MTU too large w/ XDP enabled.", args) + sim.set_mtu(1500) + + sim.wait_for_flush() + start_test("Test non-offload XDP attaching to HW...") + bpftool_prog_load("sample_ret0.bpf.o", "/sys/fs/bpf/nooffload") + nooffload = bpf_pinned("/sys/fs/bpf/nooffload") + ret, _, err = sim.set_xdp(nooffload, "offload", + fail=False, include_stderr=True) + fail(ret == 0, "attached non-offloaded XDP program to HW") + check_extack_nsim(err, "xdpoffload of non-bound program.", args) + rm("/sys/fs/bpf/nooffload") + + start_test("Test offload XDP attaching to drv...") + bpftool_prog_load("sample_ret0.bpf.o", "/sys/fs/bpf/offload", + dev=sim['ifname']) + offload = bpf_pinned("/sys/fs/bpf/offload") + ret, _, err = sim.set_xdp(offload, "drv", fail=False, include_stderr=True) + fail(ret == 0, "attached offloaded XDP program to drv") + check_extack(err, "Using offloaded program without HW_MODE flag is not supported.", args) + rm("/sys/fs/bpf/offload") + sim.wait_for_flush() + + start_test("Test XDP load failure...") + sim.dfs["dev/bpf_bind_verifier_accept"] = 0 + ret, _, err = bpftool_prog_load("sample_ret0.bpf.o", "/sys/fs/bpf/offload", + dev=sim['ifname'], fail=False, include_stderr=True) + fail(ret == 0, "verifier should fail on load") + check_verifier_log(err, "[netdevsim] Hello from netdevsim!") + sim.dfs["dev/bpf_bind_verifier_accept"] = 1 + sim.wait_for_flush() + + start_test("Test XDP offload...") + _, _, err = sim.set_xdp(obj, "offload", verbose=True, include_stderr=True) + ipl = sim.ip_link_show(xdp=True) + link_xdp = ipl["xdp"]["prog"] + progs = bpftool_prog_list(expected=1) + prog = progs[0] + fail(link_xdp["id"] != prog["id"], "Loaded program has wrong ID") + + start_test("Test XDP offload is device bound...") + dfs = simdev.dfs_get_bound_progs(expected=1) + dprog = dfs[0] + + fail(prog["id"] != link_xdp["id"], "Program IDs don't match") + fail(prog["tag"] != link_xdp["tag"], "Program tags don't match") + fail(str(link_xdp["id"]) != dprog["id"], "Program IDs don't match") + fail(dprog["state"] != "xlated", "Offloaded program state not translated") + fail(dprog["loaded"] != "Y", "Offloaded program is not loaded") + + start_test("Test removing XDP program many times...") + sim.unset_xdp("offload") + sim.unset_xdp("offload") + sim.unset_xdp("drv") + sim.unset_xdp("drv") + sim.unset_xdp("") + sim.unset_xdp("") + bpftool_prog_list_wait(expected=0) + + start_test("Test attempt to use a program for a wrong device...") + simdev2 = BpfNetdevSimDev() + sim2, = simdev2.nsims + sim2.set_xdp(obj, "offload") + pin_file, pinned = pin_prog("/sys/fs/bpf/tmp") + + ret, _, err = sim.set_xdp(pinned, "offload", + fail=False, include_stderr=True) + fail(ret == 0, "Pinned program loaded for a different device accepted") + check_extack(err, "Program bound to different device.", args) + simdev2.remove() + ret, _, err = sim.set_xdp(pinned, "offload", + fail=False, include_stderr=True) + fail(ret == 0, "Pinned program loaded for a removed device accepted") + check_extack(err, "Program bound to different device.", args) + rm(pin_file) + bpftool_prog_list_wait(expected=0) + + simdev, sim = test_multi_prog(simdev, sim, obj, "", 1) + simdev, sim = test_multi_prog(simdev, sim, obj, "drv", 1) + simdev, sim = test_multi_prog(simdev, sim, obj, "generic", 2) + + start_test("Test mixing of TC and XDP...") + sim.tc_add_ingress() + sim.set_xdp(obj, "offload") + ret, _, err = sim.cls_bpf_add_filter(obj, skip_sw=True, + fail=False, include_stderr=True) + fail(ret == 0, "Loading TC when XDP active should fail") + check_extack_nsim(err, "driver and netdev offload states mismatch.", args) + sim.unset_xdp("offload") + sim.wait_for_flush() + + sim.cls_bpf_add_filter(obj, skip_sw=True) + ret, _, err = sim.set_xdp(obj, "offload", fail=False, include_stderr=True) + fail(ret == 0, "Loading XDP when TC active should fail") + check_extack_nsim(err, "TC program is already loaded.", args) + + start_test("Test binding TC from pinned...") + pin_file, pinned = pin_prog("/sys/fs/bpf/tmp") + sim.tc_flush_filters(bound=1, total=1) + sim.cls_bpf_add_filter(pinned, da=True, skip_sw=True) + sim.tc_flush_filters(bound=1, total=1) + + start_test("Test binding XDP from pinned...") + sim.set_xdp(obj, "offload") + pin_file, pinned = pin_prog("/sys/fs/bpf/tmp2", idx=1) + + sim.set_xdp(pinned, "offload", force=True) + sim.unset_xdp("offload") + sim.set_xdp(pinned, "offload", force=True) + sim.unset_xdp("offload") + + start_test("Test offload of wrong type fails...") + ret, _ = sim.cls_bpf_add_filter(pinned, da=True, skip_sw=True, fail=False) + fail(ret == 0, "Managed to attach XDP program to TC") + + start_test("Test asking for TC offload of two filters...") + sim.cls_bpf_add_filter(obj, da=True, skip_sw=True) + ret, _, err = sim.cls_bpf_add_filter(obj, da=True, skip_sw=True, + fail=False, include_stderr=True) + fail(ret == 0, "Managed to offload two TC filters at the same time") + check_extack_nsim(err, "driver and netdev offload states mismatch.", args) + + sim.tc_flush_filters(bound=2, total=2) + + start_test("Test if netdev removal waits for translation...") + delay_msec = 500 + sim.dfs["dev/bpf_bind_verifier_delay"] = delay_msec + start = time.time() + cmd_line = "tc filter add dev %s ingress bpf %s da skip_sw" % \ + (sim['ifname'], obj) + tc_proc = cmd(cmd_line, background=True, fail=False) + # Wait for the verifier to start + while simdev.dfs_num_bound_progs() <= 2: + pass + simdev.remove() + end = time.time() + ret, _ = cmd_result(tc_proc, fail=False) + time_diff = end - start + log("Time", "start:\t%s\nend:\t%s\ndiff:\t%s" % (start, end, time_diff)) + + fail(ret == 0, "Managed to load TC filter on a unregistering device") + delay_sec = delay_msec * 0.001 + fail(time_diff < delay_sec, "Removal process took %s, expected %s" % + (time_diff, delay_sec)) + + # Remove all pinned files and reinstantiate the netdev + clean_up() + bpftool_prog_list_wait(expected=0) + + simdev = BpfNetdevSimDev() + sim, = simdev.nsims + map_obj = bpf_obj("sample_map_ret0.bpf.o") + start_test("Test loading program with maps...") + sim.set_xdp(map_obj, "offload", JSON=False) # map fixup msg breaks JSON + + start_test("Test bpftool bound info reporting (own ns)...") + check_dev_info(False, "") + + start_test("Test bpftool bound info reporting (other ns)...") + ns = mknetns() + sim.set_ns(ns) + check_dev_info(True, "") + + start_test("Test bpftool bound info reporting (remote ns)...") + check_dev_info(False, ns) + + start_test("Test bpftool bound info reporting (back to own ns)...") + sim.set_ns("") + check_dev_info(False, "") + + prog_file, _ = pin_prog("/sys/fs/bpf/tmp_prog") + map_file, _ = pin_map("/sys/fs/bpf/tmp_map", idx=1, expected=2) + simdev.remove() + + start_test("Test bpftool bound info reporting (removed dev)...") + check_dev_info_removed(prog_file=prog_file, map_file=map_file) + + # Remove all pinned files and reinstantiate the netdev + clean_up() + bpftool_prog_list_wait(expected=0) + + simdev = BpfNetdevSimDev() + sim, = simdev.nsims + + start_test("Test map update (no flags)...") + sim.set_xdp(map_obj, "offload", JSON=False) # map fixup msg breaks JSON + maps = bpftool_map_list_wait(expected=2) + array = maps[0] if maps[0]["type"] == "array" else maps[1] + htab = maps[0] if maps[0]["type"] == "hash" else maps[1] + for m in maps: + for i in range(2): + bpftool("map update id %d key %s value %s" % + (m["id"], int2str("I", i), int2str("Q", i * 3))) + + for m in maps: + ret, _ = bpftool("map update id %d key %s value %s" % + (m["id"], int2str("I", 3), int2str("Q", 3 * 3)), + fail=False) + fail(ret == 0, "added too many entries") + + start_test("Test map update (exists)...") + for m in maps: + for i in range(2): + bpftool("map update id %d key %s value %s exist" % + (m["id"], int2str("I", i), int2str("Q", i * 3))) + + for m in maps: + ret, err = bpftool("map update id %d key %s value %s exist" % + (m["id"], int2str("I", 3), int2str("Q", 3 * 3)), + fail=False) + fail(ret == 0, "updated non-existing key") + fail(err["error"].find("No such file or directory") == -1, + "expected ENOENT, error is '%s'" % (err["error"])) + + start_test("Test map update (noexist)...") + for m in maps: + for i in range(2): + ret, err = bpftool("map update id %d key %s value %s noexist" % + (m["id"], int2str("I", i), int2str("Q", i * 3)), + fail=False) + fail(ret == 0, "updated existing key") + fail(err["error"].find("File exists") == -1, + "expected EEXIST, error is '%s'" % (err["error"])) + + start_test("Test map dump...") + for m in maps: + _, entries = bpftool("map dump id %d" % (m["id"])) + for i in range(2): + key = str2int(entries[i]["key"]) + fail(key != i, "expected key %d, got %d" % (key, i)) + val = str2int(entries[i]["value"]) + fail(val != i * 3, "expected value %d, got %d" % (val, i * 3)) + + start_test("Test map getnext...") + for m in maps: + _, entry = bpftool("map getnext id %d" % (m["id"])) + key = str2int(entry["next_key"]) + fail(key != 0, "next key %d, expected %d" % (key, 0)) + _, entry = bpftool("map getnext id %d key %s" % + (m["id"], int2str("I", 0))) + key = str2int(entry["next_key"]) + fail(key != 1, "next key %d, expected %d" % (key, 1)) + ret, err = bpftool("map getnext id %d key %s" % + (m["id"], int2str("I", 1)), fail=False) + fail(ret == 0, "got next key past the end of map") + fail(err["error"].find("No such file or directory") == -1, + "expected ENOENT, error is '%s'" % (err["error"])) + + start_test("Test map delete (htab)...") + for i in range(2): + bpftool("map delete id %d key %s" % (htab["id"], int2str("I", i))) + + start_test("Test map delete (array)...") + for i in range(2): + ret, err = bpftool("map delete id %d key %s" % + (htab["id"], int2str("I", i)), fail=False) + fail(ret == 0, "removed entry from an array") + fail(err["error"].find("No such file or directory") == -1, + "expected ENOENT, error is '%s'" % (err["error"])) + + start_test("Test map remove...") + sim.unset_xdp("offload") + bpftool_map_list_wait(expected=0) + simdev.remove() + + simdev = BpfNetdevSimDev() + sim, = simdev.nsims + sim.set_xdp(map_obj, "offload", JSON=False) # map fixup msg breaks JSON + simdev.remove() + bpftool_map_list_wait(expected=0) + + start_test("Test map creation fail path...") + simdev = BpfNetdevSimDev() + sim, = simdev.nsims + sim.dfs["bpf_map_accept"] = "N" + ret, _ = sim.set_xdp(map_obj, "offload", JSON=False, fail=False) + fail(ret == 0, + "netdevsim didn't refuse to create a map with offload disabled") + + simdev.remove() + + start_test("Test multi-dev ASIC program reuse...") + simdevA = BpfNetdevSimDev() + simA, = simdevA.nsims + simdevB = BpfNetdevSimDev(3) + simB1, simB2, simB3 = simdevB.nsims + sims = (simA, simB1, simB2, simB3) + simB = (simB1, simB2, simB3) + + bpftool_prog_load("sample_map_ret0.bpf.o", "/sys/fs/bpf/nsimA", + dev=simA['ifname']) + progA = bpf_pinned("/sys/fs/bpf/nsimA") + bpftool_prog_load("sample_map_ret0.bpf.o", "/sys/fs/bpf/nsimB", + dev=simB1['ifname']) + progB = bpf_pinned("/sys/fs/bpf/nsimB") + + simA.set_xdp(progA, "offload", JSON=False) + for d in simdevB.nsims: + d.set_xdp(progB, "offload", JSON=False) + + start_test("Test multi-dev ASIC cross-dev replace...") + ret, _ = simA.set_xdp(progB, "offload", force=True, JSON=False, fail=False) + fail(ret == 0, "cross-ASIC program allowed") + for d in simdevB.nsims: + ret, _ = d.set_xdp(progA, "offload", force=True, JSON=False, fail=False) + fail(ret == 0, "cross-ASIC program allowed") + + start_test("Test multi-dev ASIC cross-dev install...") + for d in sims: + d.unset_xdp("offload") + + ret, _, err = simA.set_xdp(progB, "offload", force=True, JSON=False, + fail=False, include_stderr=True) + fail(ret == 0, "cross-ASIC program allowed") + check_extack(err, "Program bound to different device.", args) + for d in simdevB.nsims: + ret, _, err = d.set_xdp(progA, "offload", force=True, JSON=False, + fail=False, include_stderr=True) + fail(ret == 0, "cross-ASIC program allowed") + check_extack(err, "Program bound to different device.", args) + + start_test("Test multi-dev ASIC cross-dev map reuse...") + + mapA = bpftool("prog show %s" % (progA))[1]["map_ids"][0] + mapB = bpftool("prog show %s" % (progB))[1]["map_ids"][0] + + ret, _ = bpftool_prog_load("sample_map_ret0.bpf.o", "/sys/fs/bpf/nsimB_", + dev=simB3['ifname'], + maps=["idx 0 id %d" % (mapB)], + fail=False) + fail(ret != 0, "couldn't reuse a map on the same ASIC") + rm("/sys/fs/bpf/nsimB_") + + ret, _, err = bpftool_prog_load("sample_map_ret0.bpf.o", "/sys/fs/bpf/nsimA_", + dev=simA['ifname'], + maps=["idx 0 id %d" % (mapB)], + fail=False, include_stderr=True) + fail(ret == 0, "could reuse a map on a different ASIC") + fail(err.count("offload device mismatch between prog and map") == 0, + "error message missing for cross-ASIC map") + + ret, _, err = bpftool_prog_load("sample_map_ret0.bpf.o", "/sys/fs/bpf/nsimB_", + dev=simB1['ifname'], + maps=["idx 0 id %d" % (mapA)], + fail=False, include_stderr=True) + fail(ret == 0, "could reuse a map on a different ASIC") + fail(err.count("offload device mismatch between prog and map") == 0, + "error message missing for cross-ASIC map") + + start_test("Test multi-dev ASIC cross-dev destruction...") + bpftool_prog_list_wait(expected=2) + + simdevA.remove() + bpftool_prog_list_wait(expected=1) + + ifnameB = bpftool("prog show %s" % (progB))[1]["dev"]["ifname"] + fail(ifnameB != simB1['ifname'], "program not bound to original device") + simB1.remove() + bpftool_prog_list_wait(expected=1) + + start_test("Test multi-dev ASIC cross-dev destruction - move...") + ifnameB = bpftool("prog show %s" % (progB))[1]["dev"]["ifname"] + fail(ifnameB not in (simB2['ifname'], simB3['ifname']), + "program not bound to remaining devices") + + simB2.remove() + ifnameB = bpftool("prog show %s" % (progB))[1]["dev"]["ifname"] + fail(ifnameB != simB3['ifname'], "program not bound to remaining device") + + simB3.remove() + simdevB.remove() + bpftool_prog_list_wait(expected=0) + + start_test("Test multi-dev ASIC cross-dev destruction - orphaned...") + ret, out = bpftool("prog show %s" % (progB), fail=False) + fail(ret != 0, "couldn't get information about orphaned program") + + print("%s: OK" % (os.path.basename(__file__))) + +finally: + log("Clean up...", "", level=1) + log_level_inc() + clean_up() diff --git a/tools/testing/selftests/net/cmsg_sender.c b/tools/testing/selftests/net/cmsg_sender.c index 161db24e3c..876c2db02a 100644 --- a/tools/testing/selftests/net/cmsg_sender.c +++ b/tools/testing/selftests/net/cmsg_sender.c @@ -260,15 +260,8 @@ cs_write_cmsg(int fd, struct msghdr *msg, char *cbuf, size_t cbuf_sz) SOL_IPV6, IPV6_HOPLIMIT, &opt.v6.hlimit); if (opt.txtime.ena) { - struct sock_txtime so_txtime = { - .clockid = CLOCK_MONOTONIC, - }; __u64 txtime; - if (setsockopt(fd, SOL_SOCKET, SO_TXTIME, - &so_txtime, sizeof(so_txtime))) - error(ERN_SOCKOPT, errno, "setsockopt TXTIME"); - txtime = time_start_mono.tv_sec * (1000ULL * 1000 * 1000) + time_start_mono.tv_nsec + opt.txtime.delay * 1000; @@ -284,13 +277,6 @@ cs_write_cmsg(int fd, struct msghdr *msg, char *cbuf, size_t cbuf_sz) memcpy(CMSG_DATA(cmsg), &txtime, sizeof(txtime)); } if (opt.ts.ena) { - __u32 val = SOF_TIMESTAMPING_SOFTWARE | - SOF_TIMESTAMPING_OPT_TSONLY; - - if (setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, - &val, sizeof(val))) - error(ERN_SOCKOPT, errno, "setsockopt TIMESTAMPING"); - cmsg = (struct cmsghdr *)(cbuf + cmsg_len); cmsg_len += CMSG_SPACE(sizeof(__u32)); if (cbuf_sz < cmsg_len) @@ -426,6 +412,24 @@ static void ca_set_sockopts(int fd) setsockopt(fd, SOL_SOCKET, SO_PRIORITY, &opt.sockopt.priority, sizeof(opt.sockopt.priority))) error(ERN_SOCKOPT, errno, "setsockopt SO_PRIORITY"); + + if (opt.txtime.ena) { + struct sock_txtime so_txtime = { + .clockid = CLOCK_MONOTONIC, + }; + + if (setsockopt(fd, SOL_SOCKET, SO_TXTIME, + &so_txtime, sizeof(so_txtime))) + error(ERN_SOCKOPT, errno, "setsockopt TXTIME"); + } + if (opt.ts.ena) { + __u32 val = SOF_TIMESTAMPING_SOFTWARE | + SOF_TIMESTAMPING_OPT_TSONLY; + + if (setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, + &val, sizeof(val))) + error(ERN_SOCKOPT, errno, "setsockopt TIMESTAMPING"); + } } int main(int argc, char *argv[]) diff --git a/tools/testing/selftests/net/cmsg_time.sh b/tools/testing/selftests/net/cmsg_time.sh index af85267ad1..1d7e756644 100755 --- a/tools/testing/selftests/net/cmsg_time.sh +++ b/tools/testing/selftests/net/cmsg_time.sh @@ -66,10 +66,13 @@ for i in "-4 $TGT4" "-6 $TGT6"; do awk '/SND/ { if ($3 > 1000) print "OK"; }') check_result $? "$ts" "OK" "$prot - TXTIME abs" - ts=$(ip netns exec $NS ./cmsg_sender -p $p $i 1234 -t -d 1000 | + [ "$KSFT_MACHINE_SLOW" = yes ] && delay=8000 || delay=1000 + + ts=$(ip netns exec $NS ./cmsg_sender -p $p $i 1234 -t -d $delay | awk '/SND/ {snd=$3} /SCHED/ {sch=$3} - END { if (snd - sch > 500) print "OK"; }') + END { if (snd - sch > '$((delay/2))') print "OK"; + else print snd, "-", sch, "<", '$((delay/2))'; }') check_result $? "$ts" "OK" "$prot - TXTIME rel" done done diff --git a/tools/testing/selftests/net/config b/tools/testing/selftests/net/config index 04de7a6ba6..d4891f7a2b 100644 --- a/tools/testing/selftests/net/config +++ b/tools/testing/selftests/net/config @@ -101,3 +101,5 @@ CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_CRYPTO_ARIA=y CONFIG_XFRM_INTERFACE=m CONFIG_XFRM_USER=m +CONFIG_IP_NF_MATCH_RPFILTER=m +CONFIG_IP6_NF_MATCH_RPFILTER=m diff --git a/tools/testing/selftests/net/devlink_port_split.py b/tools/testing/selftests/net/devlink_port_split.py deleted file mode 100755 index 2d84c7a0be..0000000000 --- a/tools/testing/selftests/net/devlink_port_split.py +++ /dev/null @@ -1,309 +0,0 @@ -#!/usr/bin/env python3 -# SPDX-License-Identifier: GPL-2.0 - -from subprocess import PIPE, Popen -import json -import time -import argparse -import collections -import sys - -# -# Test port split configuration using devlink-port lanes attribute. -# The test is skipped in case the attribute is not available. -# -# First, check that all the ports with 1 lane fail to split. -# Second, check that all the ports with more than 1 lane can be split -# to all valid configurations (e.g., split to 2, split to 4 etc.) -# - - -# Kselftest framework requirement - SKIP code is 4 -KSFT_SKIP=4 -Port = collections.namedtuple('Port', 'bus_info name') - - -def run_command(cmd, should_fail=False): - """ - Run a command in subprocess. - Return: Tuple of (stdout, stderr). - """ - - p = Popen(cmd, stdout=PIPE, stderr=PIPE, shell=True) - stdout, stderr = p.communicate() - stdout, stderr = stdout.decode(), stderr.decode() - - if stderr != "" and not should_fail: - print("Error sending command: %s" % cmd) - print(stdout) - print(stderr) - return stdout, stderr - - -class devlink_ports(object): - """ - Class that holds information on the devlink ports, required to the tests; - if_names: A list of interfaces in the devlink ports. - """ - - def get_if_names(dev): - """ - Get a list of physical devlink ports. - Return: Array of tuples (bus_info/port, if_name). - """ - - arr = [] - - cmd = "devlink -j port show" - stdout, stderr = run_command(cmd) - assert stderr == "" - ports = json.loads(stdout)['port'] - - validate_devlink_output(ports, 'flavour') - - for port in ports: - if dev in port: - if ports[port]['flavour'] == 'physical': - arr.append(Port(bus_info=port, name=ports[port]['netdev'])) - - return arr - - def __init__(self, dev): - self.if_names = devlink_ports.get_if_names(dev) - - -def get_max_lanes(port): - """ - Get the $port's maximum number of lanes. - Return: number of lanes, e.g. 1, 2, 4 and 8. - """ - - cmd = "devlink -j port show %s" % port - stdout, stderr = run_command(cmd) - assert stderr == "" - values = list(json.loads(stdout)['port'].values())[0] - - if 'lanes' in values: - lanes = values['lanes'] - else: - lanes = 0 - return lanes - - -def get_split_ability(port): - """ - Get the $port split ability. - Return: split ability, true or false. - """ - - cmd = "devlink -j port show %s" % port.name - stdout, stderr = run_command(cmd) - assert stderr == "" - values = list(json.loads(stdout)['port'].values())[0] - - return values['splittable'] - - -def split(k, port, should_fail=False): - """ - Split $port into $k ports. - If should_fail == True, the split should fail. Otherwise, should pass. - Return: Array of sub ports after splitting. - If the $port wasn't split, the array will be empty. - """ - - cmd = "devlink port split %s count %s" % (port.bus_info, k) - stdout, stderr = run_command(cmd, should_fail=should_fail) - - if should_fail: - if not test(stderr != "", "%s is unsplittable" % port.name): - print("split an unsplittable port %s" % port.name) - return create_split_group(port, k) - else: - if stderr == "": - return create_split_group(port, k) - print("didn't split a splittable port %s" % port.name) - - return [] - - -def unsplit(port): - """ - Unsplit $port. - """ - - cmd = "devlink port unsplit %s" % port - stdout, stderr = run_command(cmd) - test(stderr == "", "Unsplit port %s" % port) - - -def exists(port, dev): - """ - Check if $port exists in the devlink ports. - Return: True is so, False otherwise. - """ - - return any(dev_port.name == port - for dev_port in devlink_ports.get_if_names(dev)) - - -def exists_and_lanes(ports, lanes, dev): - """ - Check if every port in the list $ports exists in the devlink ports and has - $lanes number of lanes after splitting. - Return: True if both are True, False otherwise. - """ - - for port in ports: - max_lanes = get_max_lanes(port) - if not exists(port, dev): - print("port %s doesn't exist in devlink ports" % port) - return False - if max_lanes != lanes: - print("port %s has %d lanes, but %s were expected" - % (port, lanes, max_lanes)) - return False - return True - - -def test(cond, msg): - """ - Check $cond and print a message accordingly. - Return: True is pass, False otherwise. - """ - - if cond: - print("TEST: %-60s [ OK ]" % msg) - else: - print("TEST: %-60s [FAIL]" % msg) - - return cond - - -def create_split_group(port, k): - """ - Create the split group for $port. - Return: Array with $k elements, which are the split port group. - """ - - return list(port.name + "s" + str(i) for i in range(k)) - - -def split_unsplittable_port(port, k): - """ - Test that splitting of unsplittable port fails. - """ - - # split to max - new_split_group = split(k, port, should_fail=True) - - if new_split_group != []: - unsplit(port.bus_info) - - -def split_splittable_port(port, k, lanes, dev): - """ - Test that splitting of splittable port passes correctly. - """ - - new_split_group = split(k, port) - - # Once the split command ends, it takes some time to the sub ifaces' - # to get their names. Use udevadm to continue only when all current udev - # events are handled. - cmd = "udevadm settle" - stdout, stderr = run_command(cmd) - assert stderr == "" - - if new_split_group != []: - test(exists_and_lanes(new_split_group, lanes/k, dev), - "split port %s into %s" % (port.name, k)) - - unsplit(port.bus_info) - - -def validate_devlink_output(devlink_data, target_property=None): - """ - Determine if test should be skipped by checking: - 1. devlink_data contains values - 2. The target_property exist in devlink_data - """ - skip_reason = None - if any(devlink_data.values()): - if target_property: - skip_reason = "{} not found in devlink output, test skipped".format(target_property) - for key in devlink_data: - if target_property in devlink_data[key]: - skip_reason = None - else: - skip_reason = 'devlink output is empty, test skipped' - - if skip_reason: - print(skip_reason) - sys.exit(KSFT_SKIP) - - -def make_parser(): - parser = argparse.ArgumentParser(description='A test for port splitting.') - parser.add_argument('--dev', - help='The devlink handle of the device under test. ' + - 'The default is the first registered devlink ' + - 'handle.') - - return parser - - -def main(cmdline=None): - parser = make_parser() - args = parser.parse_args(cmdline) - - dev = args.dev - if not dev: - cmd = "devlink -j dev show" - stdout, stderr = run_command(cmd) - assert stderr == "" - - validate_devlink_output(json.loads(stdout)) - devs = json.loads(stdout)['dev'] - dev = list(devs.keys())[0] - - cmd = "devlink dev show %s" % dev - stdout, stderr = run_command(cmd) - if stderr != "": - print("devlink device %s can not be found" % dev) - sys.exit(1) - - ports = devlink_ports(dev) - - found_max_lanes = False - for port in ports.if_names: - max_lanes = get_max_lanes(port.name) - - # If max lanes is 0, do not test port splitting at all - if max_lanes == 0: - continue - - # If 1 lane, shouldn't be able to split - elif max_lanes == 1: - test(not get_split_ability(port), - "%s should not be able to split" % port.name) - split_unsplittable_port(port, max_lanes) - - # Else, splitting should pass and all the split ports should exist. - else: - lane = max_lanes - test(get_split_ability(port), - "%s should be able to split" % port.name) - while lane > 1: - split_splittable_port(port, lane, max_lanes, dev) - - lane //= 2 - found_max_lanes = True - - if not found_max_lanes: - print(f"Test not started, no port of device {dev} reports max_lanes") - sys.exit(KSFT_SKIP) - - -if __name__ == "__main__": - main() diff --git a/tools/testing/selftests/net/epoll_busy_poll.c b/tools/testing/selftests/net/epoll_busy_poll.c new file mode 100644 index 0000000000..16e457c2f8 --- /dev/null +++ b/tools/testing/selftests/net/epoll_busy_poll.c @@ -0,0 +1,320 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +/* Basic per-epoll context busy poll test. + * + * Only tests the ioctls, but should be expanded to test two connected hosts in + * the future + */ + +#define _GNU_SOURCE + +#include <error.h> +#include <errno.h> +#include <inttypes.h> +#include <limits.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> + +#include <sys/capability.h> + +#include <sys/epoll.h> +#include <sys/ioctl.h> +#include <sys/socket.h> + +#include "../kselftest_harness.h" + +/* if the headers haven't been updated, we need to define some things */ +#if !defined(EPOLL_IOC_TYPE) +struct epoll_params { + uint32_t busy_poll_usecs; + uint16_t busy_poll_budget; + uint8_t prefer_busy_poll; + + /* pad the struct to a multiple of 64bits */ + uint8_t __pad; +}; + +#define EPOLL_IOC_TYPE 0x8A +#define EPIOCSPARAMS _IOW(EPOLL_IOC_TYPE, 0x01, struct epoll_params) +#define EPIOCGPARAMS _IOR(EPOLL_IOC_TYPE, 0x02, struct epoll_params) +#endif + +FIXTURE(invalid_fd) +{ + int invalid_fd; + struct epoll_params params; +}; + +FIXTURE_SETUP(invalid_fd) +{ + int ret; + + ret = socket(AF_UNIX, SOCK_DGRAM, 0); + EXPECT_NE(-1, ret) + TH_LOG("error creating unix socket"); + + self->invalid_fd = ret; +} + +FIXTURE_TEARDOWN(invalid_fd) +{ + int ret; + + ret = close(self->invalid_fd); + EXPECT_EQ(0, ret); +} + +TEST_F(invalid_fd, test_invalid_fd) +{ + int ret; + + ret = ioctl(self->invalid_fd, EPIOCGPARAMS, &self->params); + + EXPECT_EQ(-1, ret) + TH_LOG("EPIOCGPARAMS on invalid epoll FD should error"); + + EXPECT_EQ(ENOTTY, errno) + TH_LOG("EPIOCGPARAMS on invalid epoll FD should set errno to ENOTTY"); + + memset(&self->params, 0, sizeof(struct epoll_params)); + + ret = ioctl(self->invalid_fd, EPIOCSPARAMS, &self->params); + + EXPECT_EQ(-1, ret) + TH_LOG("EPIOCSPARAMS on invalid epoll FD should error"); + + EXPECT_EQ(ENOTTY, errno) + TH_LOG("EPIOCSPARAMS on invalid epoll FD should set errno to ENOTTY"); +} + +FIXTURE(epoll_busy_poll) +{ + int fd; + struct epoll_params params; + struct epoll_params *invalid_params; + cap_t caps; +}; + +FIXTURE_SETUP(epoll_busy_poll) +{ + int ret; + + ret = epoll_create1(0); + EXPECT_NE(-1, ret) + TH_LOG("epoll_create1 failed?"); + + self->fd = ret; + + self->caps = cap_get_proc(); + EXPECT_NE(NULL, self->caps); +} + +FIXTURE_TEARDOWN(epoll_busy_poll) +{ + int ret; + + ret = close(self->fd); + EXPECT_EQ(0, ret); + + ret = cap_free(self->caps); + EXPECT_NE(-1, ret) + TH_LOG("unable to free capabilities"); +} + +TEST_F(epoll_busy_poll, test_get_params) +{ + /* begin by getting the epoll params from the kernel + * + * the default should be default and all fields should be zero'd by the + * kernel, so set params fields to garbage to test this. + */ + int ret = 0; + + self->params.busy_poll_usecs = 0xff; + self->params.busy_poll_budget = 0xff; + self->params.prefer_busy_poll = 1; + self->params.__pad = 0xf; + + ret = ioctl(self->fd, EPIOCGPARAMS, &self->params); + EXPECT_EQ(0, ret) + TH_LOG("ioctl EPIOCGPARAMS should succeed"); + + EXPECT_EQ(0, self->params.busy_poll_usecs) + TH_LOG("EPIOCGPARAMS busy_poll_usecs should have been 0"); + + EXPECT_EQ(0, self->params.busy_poll_budget) + TH_LOG("EPIOCGPARAMS busy_poll_budget should have been 0"); + + EXPECT_EQ(0, self->params.prefer_busy_poll) + TH_LOG("EPIOCGPARAMS prefer_busy_poll should have been 0"); + + EXPECT_EQ(0, self->params.__pad) + TH_LOG("EPIOCGPARAMS __pad should have been 0"); + + self->invalid_params = (struct epoll_params *)0xdeadbeef; + ret = ioctl(self->fd, EPIOCGPARAMS, self->invalid_params); + + EXPECT_EQ(-1, ret) + TH_LOG("EPIOCGPARAMS should error with invalid params"); + + EXPECT_EQ(EFAULT, errno) + TH_LOG("EPIOCGPARAMS with invalid params should set errno to EFAULT"); +} + +TEST_F(epoll_busy_poll, test_set_invalid) +{ + int ret; + + memset(&self->params, 0, sizeof(struct epoll_params)); + + self->params.__pad = 1; + + ret = ioctl(self->fd, EPIOCSPARAMS, &self->params); + + EXPECT_EQ(-1, ret) + TH_LOG("EPIOCSPARAMS non-zero __pad should error"); + + EXPECT_EQ(EINVAL, errno) + TH_LOG("EPIOCSPARAMS non-zero __pad errno should be EINVAL"); + + self->params.__pad = 0; + self->params.busy_poll_usecs = (uint32_t)INT_MAX + 1; + + ret = ioctl(self->fd, EPIOCSPARAMS, &self->params); + + EXPECT_EQ(-1, ret) + TH_LOG("EPIOCSPARAMS should error busy_poll_usecs > S32_MAX"); + + EXPECT_EQ(EINVAL, errno) + TH_LOG("EPIOCSPARAMS busy_poll_usecs > S32_MAX errno should be EINVAL"); + + self->params.__pad = 0; + self->params.busy_poll_usecs = 32; + self->params.prefer_busy_poll = 2; + + ret = ioctl(self->fd, EPIOCSPARAMS, &self->params); + + EXPECT_EQ(-1, ret) + TH_LOG("EPIOCSPARAMS should error prefer_busy_poll > 1"); + + EXPECT_EQ(EINVAL, errno) + TH_LOG("EPIOCSPARAMS prefer_busy_poll > 1 errno should be EINVAL"); + + self->params.__pad = 0; + self->params.busy_poll_usecs = 32; + self->params.prefer_busy_poll = 1; + + /* set budget well above kernel's NAPI_POLL_WEIGHT of 64 */ + self->params.busy_poll_budget = UINT16_MAX; + + /* test harness should run with CAP_NET_ADMIN, but let's make sure */ + cap_flag_value_t tmp; + + ret = cap_get_flag(self->caps, CAP_NET_ADMIN, CAP_EFFECTIVE, &tmp); + EXPECT_EQ(0, ret) + TH_LOG("unable to get CAP_NET_ADMIN cap flag"); + + EXPECT_EQ(CAP_SET, tmp) + TH_LOG("expecting CAP_NET_ADMIN to be set for the test harness"); + + /* at this point we know CAP_NET_ADMIN is available, so setting the + * params with a busy_poll_budget > NAPI_POLL_WEIGHT should succeed + */ + ret = ioctl(self->fd, EPIOCSPARAMS, &self->params); + + EXPECT_EQ(0, ret) + TH_LOG("EPIOCSPARAMS should allow busy_poll_budget > NAPI_POLL_WEIGHT"); + + /* remove CAP_NET_ADMIN from our effective set */ + cap_value_t net_admin[] = { CAP_NET_ADMIN }; + + ret = cap_set_flag(self->caps, CAP_EFFECTIVE, 1, net_admin, CAP_CLEAR); + EXPECT_EQ(0, ret) + TH_LOG("couldn't clear CAP_NET_ADMIN"); + + ret = cap_set_proc(self->caps); + EXPECT_EQ(0, ret) + TH_LOG("cap_set_proc should drop CAP_NET_ADMIN"); + + /* this is now expected to fail */ + ret = ioctl(self->fd, EPIOCSPARAMS, &self->params); + + EXPECT_EQ(-1, ret) + TH_LOG("EPIOCSPARAMS should error busy_poll_budget > NAPI_POLL_WEIGHT"); + + EXPECT_EQ(EPERM, errno) + TH_LOG("EPIOCSPARAMS errno should be EPERM busy_poll_budget > NAPI_POLL_WEIGHT"); + + /* restore CAP_NET_ADMIN to our effective set */ + ret = cap_set_flag(self->caps, CAP_EFFECTIVE, 1, net_admin, CAP_SET); + EXPECT_EQ(0, ret) + TH_LOG("couldn't restore CAP_NET_ADMIN"); + + ret = cap_set_proc(self->caps); + EXPECT_EQ(0, ret) + TH_LOG("cap_set_proc should set CAP_NET_ADMIN"); + + self->invalid_params = (struct epoll_params *)0xdeadbeef; + ret = ioctl(self->fd, EPIOCSPARAMS, self->invalid_params); + + EXPECT_EQ(-1, ret) + TH_LOG("EPIOCSPARAMS should error when epoll_params is invalid"); + + EXPECT_EQ(EFAULT, errno) + TH_LOG("EPIOCSPARAMS should set errno to EFAULT when epoll_params is invalid"); +} + +TEST_F(epoll_busy_poll, test_set_and_get_valid) +{ + int ret; + + memset(&self->params, 0, sizeof(struct epoll_params)); + + self->params.busy_poll_usecs = 25; + self->params.busy_poll_budget = 16; + self->params.prefer_busy_poll = 1; + + ret = ioctl(self->fd, EPIOCSPARAMS, &self->params); + + EXPECT_EQ(0, ret) + TH_LOG("EPIOCSPARAMS with valid params should not error"); + + /* check that the kernel returns the same values back */ + + memset(&self->params, 0, sizeof(struct epoll_params)); + + ret = ioctl(self->fd, EPIOCGPARAMS, &self->params); + + EXPECT_EQ(0, ret) + TH_LOG("EPIOCGPARAMS should not error"); + + EXPECT_EQ(25, self->params.busy_poll_usecs) + TH_LOG("params.busy_poll_usecs incorrect"); + + EXPECT_EQ(16, self->params.busy_poll_budget) + TH_LOG("params.busy_poll_budget incorrect"); + + EXPECT_EQ(1, self->params.prefer_busy_poll) + TH_LOG("params.prefer_busy_poll incorrect"); + + EXPECT_EQ(0, self->params.__pad) + TH_LOG("params.__pad was not 0"); +} + +TEST_F(epoll_busy_poll, test_invalid_ioctl) +{ + int invalid_ioctl = EPIOCGPARAMS + 10; + int ret; + + ret = ioctl(self->fd, invalid_ioctl, &self->params); + + EXPECT_EQ(-1, ret) + TH_LOG("invalid ioctl should return error"); + + EXPECT_EQ(EINVAL, errno) + TH_LOG("invalid ioctl should set errno to EINVAL"); +} + +TEST_HARNESS_MAIN diff --git a/tools/testing/selftests/net/fib_rule_tests.sh b/tools/testing/selftests/net/fib_rule_tests.sh index 51157a5559..7c01f58a20 100755 --- a/tools/testing/selftests/net/fib_rule_tests.sh +++ b/tools/testing/selftests/net/fib_rule_tests.sh @@ -9,6 +9,7 @@ PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no} RTABLE=100 RTABLE_PEER=101 +RTABLE_VRF=102 GW_IP4=192.51.100.2 SRC_IP=192.51.100.3 GW_IP6=2001:db8:1::2 @@ -17,7 +18,14 @@ SRC_IP6=2001:db8:1::3 DEV_ADDR=192.51.100.1 DEV_ADDR6=2001:db8:1::1 DEV=dummy0 -TESTS="fib_rule6 fib_rule4 fib_rule6_connect fib_rule4_connect" +TESTS=" + fib_rule6 + fib_rule4 + fib_rule6_connect + fib_rule4_connect + fib_rule6_vrf + fib_rule4_vrf +" SELFTEST_PATH="" @@ -27,13 +35,18 @@ log_test() local expected=$2 local msg="$3" + $IP rule show | grep -q l3mdev + if [ $? -eq 0 ]; then + msg="$msg (VRF)" + fi + if [ ${rc} -eq ${expected} ]; then nsuccess=$((nsuccess+1)) - printf "\n TEST: %-50s [ OK ]\n" "${msg}" + printf "\n TEST: %-60s [ OK ]\n" "${msg}" else ret=1 nfail=$((nfail+1)) - printf "\n TEST: %-50s [FAIL]\n" "${msg}" + printf "\n TEST: %-60s [FAIL]\n" "${msg}" if [ "${PAUSE_ON_FAIL}" = "yes" ]; then echo echo "hit enter to continue, 'q' to quit" @@ -130,6 +143,17 @@ cleanup_peer() ip netns del $peerns } +setup_vrf() +{ + $IP link add name vrf0 up type vrf table $RTABLE_VRF + $IP link set dev $DEV master vrf0 +} + +cleanup_vrf() +{ + $IP link del dev vrf0 +} + fib_check_iproute_support() { ip rule help 2>&1 | grep -q $1 @@ -248,6 +272,13 @@ fib_rule6_test() fi } +fib_rule6_vrf_test() +{ + setup_vrf + fib_rule6_test + cleanup_vrf +} + # Verify that the IPV6_TCLASS option of UDPv6 and TCPv6 sockets is properly # taken into account when connecting the socket and when sending packets. fib_rule6_connect_test() @@ -385,6 +416,13 @@ fib_rule4_test() fi } +fib_rule4_vrf_test() +{ + setup_vrf + fib_rule4_test + cleanup_vrf +} + # Verify that the IP_TOS option of UDPv4 and TCPv4 sockets is properly taken # into account when connecting the socket and when sending packets. fib_rule4_connect_test() @@ -467,6 +505,8 @@ do fib_rule4_test|fib_rule4) fib_rule4_test;; fib_rule6_connect_test|fib_rule6_connect) fib_rule6_connect_test;; fib_rule4_connect_test|fib_rule4_connect) fib_rule4_connect_test;; + fib_rule6_vrf_test|fib_rule6_vrf) fib_rule6_vrf_test;; + fib_rule4_vrf_test|fib_rule4_vrf) fib_rule4_vrf_test;; help) echo "Test names: $TESTS"; exit 0;; diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh index 73895711cd..5f3c28fc86 100755 --- a/tools/testing/selftests/net/fib_tests.sh +++ b/tools/testing/selftests/net/fib_tests.sh @@ -1737,53 +1737,53 @@ ipv4_rt_dsfield() # DSCP 0x10 should match the specific route, no matter the ECN bits $IP route get fibmatch 172.16.102.1 dsfield 0x10 | \ - grep -q "via 172.16.103.2" + grep -q "172.16.102.0/24 tos 0x10 via 172.16.103.2" log_test $? 0 "IPv4 route with DSCP and ECN:Not-ECT" $IP route get fibmatch 172.16.102.1 dsfield 0x11 | \ - grep -q "via 172.16.103.2" + grep -q "172.16.102.0/24 tos 0x10 via 172.16.103.2" log_test $? 0 "IPv4 route with DSCP and ECN:ECT(1)" $IP route get fibmatch 172.16.102.1 dsfield 0x12 | \ - grep -q "via 172.16.103.2" + grep -q "172.16.102.0/24 tos 0x10 via 172.16.103.2" log_test $? 0 "IPv4 route with DSCP and ECN:ECT(0)" $IP route get fibmatch 172.16.102.1 dsfield 0x13 | \ - grep -q "via 172.16.103.2" + grep -q "172.16.102.0/24 tos 0x10 via 172.16.103.2" log_test $? 0 "IPv4 route with DSCP and ECN:CE" # Unknown DSCP should match the generic route, no matter the ECN bits $IP route get fibmatch 172.16.102.1 dsfield 0x14 | \ - grep -q "via 172.16.101.2" + grep -q "172.16.102.0/24 via 172.16.101.2" log_test $? 0 "IPv4 route with unknown DSCP and ECN:Not-ECT" $IP route get fibmatch 172.16.102.1 dsfield 0x15 | \ - grep -q "via 172.16.101.2" + grep -q "172.16.102.0/24 via 172.16.101.2" log_test $? 0 "IPv4 route with unknown DSCP and ECN:ECT(1)" $IP route get fibmatch 172.16.102.1 dsfield 0x16 | \ - grep -q "via 172.16.101.2" + grep -q "172.16.102.0/24 via 172.16.101.2" log_test $? 0 "IPv4 route with unknown DSCP and ECN:ECT(0)" $IP route get fibmatch 172.16.102.1 dsfield 0x17 | \ - grep -q "via 172.16.101.2" + grep -q "172.16.102.0/24 via 172.16.101.2" log_test $? 0 "IPv4 route with unknown DSCP and ECN:CE" # Null DSCP should match the generic route, no matter the ECN bits $IP route get fibmatch 172.16.102.1 dsfield 0x00 | \ - grep -q "via 172.16.101.2" + grep -q "172.16.102.0/24 via 172.16.101.2" log_test $? 0 "IPv4 route with no DSCP and ECN:Not-ECT" $IP route get fibmatch 172.16.102.1 dsfield 0x01 | \ - grep -q "via 172.16.101.2" + grep -q "172.16.102.0/24 via 172.16.101.2" log_test $? 0 "IPv4 route with no DSCP and ECN:ECT(1)" $IP route get fibmatch 172.16.102.1 dsfield 0x02 | \ - grep -q "via 172.16.101.2" + grep -q "172.16.102.0/24 via 172.16.101.2" log_test $? 0 "IPv4 route with no DSCP and ECN:ECT(0)" $IP route get fibmatch 172.16.102.1 dsfield 0x03 | \ - grep -q "via 172.16.101.2" + grep -q "172.16.102.0/24 via 172.16.101.2" log_test $? 0 "IPv4 route with no DSCP and ECN:CE" } diff --git a/tools/testing/selftests/net/forwarding/Makefile b/tools/testing/selftests/net/forwarding/Makefile index 535865b3d1..fa7b59ff40 100644 --- a/tools/testing/selftests/net/forwarding/Makefile +++ b/tools/testing/selftests/net/forwarding/Makefile @@ -15,18 +15,12 @@ TEST_PROGS = bridge_fdb_learning_limit.sh \ bridge_vlan_unaware.sh \ custom_multipath_hash.sh \ dual_vxlan_bridge.sh \ - ethtool_extended_state.sh \ - ethtool_mm.sh \ - ethtool_rmon.sh \ - ethtool.sh \ gre_custom_multipath_hash.sh \ gre_inner_v4_multipath.sh \ gre_inner_v6_multipath.sh \ gre_multipath_nh_res.sh \ gre_multipath_nh.sh \ gre_multipath.sh \ - hw_stats_l3.sh \ - hw_stats_l3_gre.sh \ ip6_forward_instats_vrf.sh \ ip6gre_custom_multipath_hash.sh \ ip6gre_flat_key.sh \ @@ -43,8 +37,8 @@ TEST_PROGS = bridge_fdb_learning_limit.sh \ ipip_hier_gre_key.sh \ ipip_hier_gre_keys.sh \ ipip_hier_gre.sh \ + lib_sh_test.sh \ local_termination.sh \ - loopback.sh \ mirror_gre_bound.sh \ mirror_gre_bridge_1d.sh \ mirror_gre_bridge_1d_vlan.sh \ @@ -113,7 +107,6 @@ TEST_PROGS = bridge_fdb_learning_limit.sh \ vxlan_symmetric.sh TEST_FILES := devlink_lib.sh \ - ethtool_lib.sh \ fib_offload_lib.sh \ forwarding.config.sample \ ip6gre_lib.sh \ diff --git a/tools/testing/selftests/net/forwarding/README b/tools/testing/selftests/net/forwarding/README index b8a2af8fcf..7fdb6a9ca5 100644 --- a/tools/testing/selftests/net/forwarding/README +++ b/tools/testing/selftests/net/forwarding/README @@ -56,3 +56,36 @@ o Checks shall be added to lib.sh for any external dependencies. o Code shall be checked using ShellCheck [1] prior to submission. 1. https://www.shellcheck.net/ + +Customization +============= + +The forwarding selftests framework uses a number of variables that +influence its behavior and tools it invokes, and how it invokes them, in +various ways. A number of these variables can be overridden. The way these +overridable variables are specified is typically one of the following two +syntaxes: + + : "${VARIABLE:=default_value}" + VARIABLE=${VARIABLE:=default_value} + +Any of these variables can be overridden. Notably net/forwarding/lib.sh and +net/lib.sh contain a number of overridable variables. + +One way of overriding these variables is through the environment: + + PAUSE_ON_FAIL=yes ./some_test.sh + +The variable NETIFS is special. Since it is an array variable, there is no +way to pass it through the environment. Its value can instead be given as +consecutive arguments to the selftest: + + ./some_test.sh swp{1..8} + +A way to customize variables in a persistent fashion is to create a file +named forwarding.config in this directory. lib.sh sources the file if +present, so it can contain any shell code. Typically it will contain +assignments of variables whose value should be overridden. + +forwarding.config.sample is available in the directory as an example of +how forwarding.config might look. diff --git a/tools/testing/selftests/net/forwarding/bridge_fdb_learning_limit.sh b/tools/testing/selftests/net/forwarding/bridge_fdb_learning_limit.sh index 0760a34b71..a21b7085da 100755 --- a/tools/testing/selftests/net/forwarding/bridge_fdb_learning_limit.sh +++ b/tools/testing/selftests/net/forwarding/bridge_fdb_learning_limit.sh @@ -178,6 +178,22 @@ fdb_del() check_err $? "Failed to remove a FDB entry of type ${type}" } +check_fdb_n_learned_support() +{ + if ! ip link help bridge 2>&1 | grep -q "fdb_max_learned"; then + echo "SKIP: iproute2 too old, missing bridge max learned support" + exit $ksft_skip + fi + + ip link add dev br0 type bridge + local learned=$(fdb_get_n_learned) + ip link del dev br0 + if [ "$learned" == "null" ]; then + echo "SKIP: kernel too old; bridge fdb_n_learned feature not supported." + exit $ksft_skip + fi +} + check_accounting_one_type() { local type=$1 is_counted=$2 overrides_learned=$3 @@ -274,6 +290,8 @@ check_limit() done } +check_fdb_n_learned_support + trap cleanup EXIT setup_prepare diff --git a/tools/testing/selftests/net/forwarding/devlink_lib.sh b/tools/testing/selftests/net/forwarding/devlink_lib.sh index f1de525cfa..62a05bca1e 100644 --- a/tools/testing/selftests/net/forwarding/devlink_lib.sh +++ b/tools/testing/selftests/net/forwarding/devlink_lib.sh @@ -122,6 +122,8 @@ devlink_reload() still_pending=$(devlink resource show "$DEVLINK_DEV" | \ grep -c "size_new") check_err $still_pending "Failed reload - There are still unset sizes" + + udevadm settle } declare -A DEVLINK_ORIG diff --git a/tools/testing/selftests/net/forwarding/ethtool.sh b/tools/testing/selftests/net/forwarding/ethtool.sh deleted file mode 100755 index aa2eafb7b2..0000000000 --- a/tools/testing/selftests/net/forwarding/ethtool.sh +++ /dev/null @@ -1,301 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0 - -ALL_TESTS=" - same_speeds_autoneg_off - different_speeds_autoneg_off - combination_of_neg_on_and_off - advertise_subset_of_speeds - check_highest_speed_is_chosen - different_speeds_autoneg_on -" -NUM_NETIFS=2 -source lib.sh -source ethtool_lib.sh - -h1_create() -{ - simple_if_init $h1 192.0.2.1/24 -} - -h1_destroy() -{ - simple_if_fini $h1 192.0.2.1/24 -} - -h2_create() -{ - simple_if_init $h2 192.0.2.2/24 -} - -h2_destroy() -{ - simple_if_fini $h2 192.0.2.2/24 -} - -setup_prepare() -{ - h1=${NETIFS[p1]} - h2=${NETIFS[p2]} - - h1_create - h2_create -} - -cleanup() -{ - pre_cleanup - - h2_destroy - h1_destroy -} - -same_speeds_autoneg_off() -{ - # Check that when each of the reported speeds is forced, the links come - # up and are operational. - local -a speeds_arr=($(common_speeds_get $h1 $h2 0 0)) - - for speed in "${speeds_arr[@]}"; do - RET=0 - ethtool_set $h1 speed $speed autoneg off - ethtool_set $h2 speed $speed autoneg off - - setup_wait_dev_with_timeout $h1 - setup_wait_dev_with_timeout $h2 - ping_do $h1 192.0.2.2 - check_err $? "speed $speed autoneg off" - log_test "force of same speed autoneg off" - log_info "speed = $speed" - done - - ethtool -s $h2 autoneg on - ethtool -s $h1 autoneg on -} - -different_speeds_autoneg_off() -{ - # Test that when we force different speeds, links are not up and ping - # fails. - RET=0 - - local -a speeds_arr=($(different_speeds_get $h1 $h2 0 0)) - local speed1=${speeds_arr[0]} - local speed2=${speeds_arr[1]} - - ethtool_set $h1 speed $speed1 autoneg off - ethtool_set $h2 speed $speed2 autoneg off - - setup_wait_dev_with_timeout $h1 - setup_wait_dev_with_timeout $h2 - ping_do $h1 192.0.2.2 - check_fail $? "ping with different speeds" - - log_test "force of different speeds autoneg off" - - ethtool -s $h2 autoneg on - ethtool -s $h1 autoneg on -} - -combination_of_neg_on_and_off() -{ - # Test that when one device is forced to a speed supported by both - # endpoints and the other device is configured to autoneg on, the links - # are up and ping passes. - local -a speeds_arr=($(common_speeds_get $h1 $h2 0 1)) - - for speed in "${speeds_arr[@]}"; do - RET=0 - ethtool_set $h1 speed $speed autoneg off - - setup_wait_dev_with_timeout $h1 - setup_wait_dev_with_timeout $h2 - ping_do $h1 192.0.2.2 - check_err $? "h1-speed=$speed autoneg off, h2 autoneg on" - log_test "one side with autoneg off and another with autoneg on" - log_info "force speed = $speed" - done - - ethtool -s $h1 autoneg on -} - -hex_speed_value_get() -{ - local speed=$1; shift - - local shift_size=${speed_values[$speed]} - speed=$((0x1 << $"shift_size")) - printf "%#x" "$speed" -} - -subset_of_common_speeds_get() -{ - local dev1=$1; shift - local dev2=$1; shift - local adver=$1; shift - - local -a speeds_arr=($(common_speeds_get $dev1 $dev2 0 $adver)) - local speed_to_advertise=0 - local speed_to_remove=${speeds_arr[0]} - speed_to_remove+='base' - - local -a speeds_mode_arr=($(common_speeds_get $dev1 $dev2 1 $adver)) - - for speed in ${speeds_mode_arr[@]}; do - if [[ $speed != $speed_to_remove* ]]; then - speed=$(hex_speed_value_get $speed) - speed_to_advertise=$(($speed_to_advertise | \ - $speed)) - fi - - done - - # Convert to hex. - printf "%#x" "$speed_to_advertise" -} - -speed_to_advertise_get() -{ - # The function returns the hex number that is composed by OR-ing all - # the modes corresponding to the provided speed. - local speed_without_mode=$1; shift - local supported_speeds=("$@"); shift - local speed_to_advertise=0 - - speed_without_mode+='base' - - for speed in ${supported_speeds[@]}; do - if [[ $speed == $speed_without_mode* ]]; then - speed=$(hex_speed_value_get $speed) - speed_to_advertise=$(($speed_to_advertise | \ - $speed)) - fi - - done - - # Convert to hex. - printf "%#x" "$speed_to_advertise" -} - -advertise_subset_of_speeds() -{ - # Test that when one device advertises a subset of speeds and another - # advertises a specific speed (but all modes of this speed), the links - # are up and ping passes. - RET=0 - - local speed_1_to_advertise=$(subset_of_common_speeds_get $h1 $h2 1) - ethtool_set $h1 advertise $speed_1_to_advertise - - if [ $RET != 0 ]; then - log_test "advertise subset of speeds" - return - fi - - local -a speeds_arr_without_mode=($(common_speeds_get $h1 $h2 0 1)) - # Check only speeds that h1 advertised. Remove the first speed. - unset speeds_arr_without_mode[0] - local -a speeds_arr_with_mode=($(common_speeds_get $h1 $h2 1 1)) - - for speed_value in ${speeds_arr_without_mode[@]}; do - RET=0 - local speed_2_to_advertise=$(speed_to_advertise_get $speed_value \ - "${speeds_arr_with_mode[@]}") - ethtool_set $h2 advertise $speed_2_to_advertise - - setup_wait_dev_with_timeout $h1 - setup_wait_dev_with_timeout $h2 - ping_do $h1 192.0.2.2 - check_err $? "h1=$speed_1_to_advertise, h2=$speed_2_to_advertise ($speed_value)" - - log_test "advertise subset of speeds" - log_info "h1=$speed_1_to_advertise, h2=$speed_2_to_advertise" - done - - ethtool -s $h2 autoneg on - ethtool -s $h1 autoneg on -} - -check_highest_speed_is_chosen() -{ - # Test that when one device advertises a subset of speeds, the other - # chooses the highest speed. This test checks configuration without - # traffic. - RET=0 - - local max_speed - local chosen_speed - local speed_to_advertise=$(subset_of_common_speeds_get $h1 $h2 1) - - ethtool_set $h1 advertise $speed_to_advertise - - if [ $RET != 0 ]; then - log_test "check highest speed" - return - fi - - local -a speeds_arr=($(common_speeds_get $h1 $h2 0 1)) - - max_speed=${speeds_arr[0]} - for current in ${speeds_arr[@]}; do - if [[ $current -gt $max_speed ]]; then - max_speed=$current - fi - done - - setup_wait_dev_with_timeout $h1 - setup_wait_dev_with_timeout $h2 - chosen_speed=$(ethtool $h1 | grep 'Speed:') - chosen_speed=${chosen_speed%"Mb/s"*} - chosen_speed=${chosen_speed#*"Speed: "} - ((chosen_speed == max_speed)) - check_err $? "h1 advertise $speed_to_advertise, h2 sync to speed $chosen_speed" - - log_test "check highest speed" - - ethtool -s $h2 autoneg on - ethtool -s $h1 autoneg on -} - -different_speeds_autoneg_on() -{ - # Test that when we configure links to advertise different speeds, - # links are not up and ping fails. - RET=0 - - local -a speeds=($(different_speeds_get $h1 $h2 1 1)) - local speed1=${speeds[0]} - local speed2=${speeds[1]} - - speed1=$(hex_speed_value_get $speed1) - speed2=$(hex_speed_value_get $speed2) - - ethtool_set $h1 advertise $speed1 - ethtool_set $h2 advertise $speed2 - - if (($RET)); then - setup_wait_dev_with_timeout $h1 - setup_wait_dev_with_timeout $h2 - ping_do $h1 192.0.2.2 - check_fail $? "ping with different speeds autoneg on" - fi - - log_test "advertise different speeds autoneg on" - - ethtool -s $h2 autoneg on - ethtool -s $h1 autoneg on -} - -skip_on_veth - -trap cleanup EXIT - -setup_prepare -setup_wait - -declare -gA speed_values -eval "speed_values=($(speeds_arr_get))" - -tests_run - -exit $EXIT_STATUS diff --git a/tools/testing/selftests/net/forwarding/ethtool_extended_state.sh b/tools/testing/selftests/net/forwarding/ethtool_extended_state.sh deleted file mode 100755 index 17f89c3b7c..0000000000 --- a/tools/testing/selftests/net/forwarding/ethtool_extended_state.sh +++ /dev/null @@ -1,117 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0 - -ALL_TESTS=" - autoneg - autoneg_force_mode - no_cable -" - -NUM_NETIFS=2 -source lib.sh -source ethtool_lib.sh - -TIMEOUT=$((WAIT_TIMEOUT * 1000)) # ms - -setup_prepare() -{ - swp1=${NETIFS[p1]} - swp2=${NETIFS[p2]} - swp3=$NETIF_NO_CABLE -} - -ethtool_ext_state() -{ - local dev=$1; shift - local expected_ext_state=$1; shift - local expected_ext_substate=${1:-""}; shift - - local ext_state=$(ethtool $dev | grep "Link detected" \ - | cut -d "(" -f2 | cut -d ")" -f1) - local ext_substate=$(echo $ext_state | cut -sd "," -f2 \ - | sed -e 's/^[[:space:]]*//') - ext_state=$(echo $ext_state | cut -d "," -f1) - - if [[ $ext_state != $expected_ext_state ]]; then - echo "Expected \"$expected_ext_state\", got \"$ext_state\"" - return 1 - fi - if [[ $ext_substate != $expected_ext_substate ]]; then - echo "Expected \"$expected_ext_substate\", got \"$ext_substate\"" - return 1 - fi -} - -autoneg() -{ - local msg - - RET=0 - - ip link set dev $swp1 up - - msg=$(busywait $TIMEOUT ethtool_ext_state $swp1 \ - "Autoneg" "No partner detected") - check_err $? "$msg" - - log_test "Autoneg, No partner detected" - - ip link set dev $swp1 down -} - -autoneg_force_mode() -{ - local msg - - RET=0 - - ip link set dev $swp1 up - ip link set dev $swp2 up - - local -a speeds_arr=($(different_speeds_get $swp1 $swp2 0 0)) - local speed1=${speeds_arr[0]} - local speed2=${speeds_arr[1]} - - ethtool_set $swp1 speed $speed1 autoneg off - ethtool_set $swp2 speed $speed2 autoneg off - - msg=$(busywait $TIMEOUT ethtool_ext_state $swp1 \ - "Autoneg" "No partner detected during force mode") - check_err $? "$msg" - - msg=$(busywait $TIMEOUT ethtool_ext_state $swp2 \ - "Autoneg" "No partner detected during force mode") - check_err $? "$msg" - - log_test "Autoneg, No partner detected during force mode" - - ethtool -s $swp2 autoneg on - ethtool -s $swp1 autoneg on - - ip link set dev $swp2 down - ip link set dev $swp1 down -} - -no_cable() -{ - local msg - - RET=0 - - ip link set dev $swp3 up - - msg=$(busywait $TIMEOUT ethtool_ext_state $swp3 "No cable") - check_err $? "$msg" - - log_test "No cable" - - ip link set dev $swp3 down -} - -skip_on_veth - -setup_prepare - -tests_run - -exit $EXIT_STATUS diff --git a/tools/testing/selftests/net/forwarding/ethtool_lib.sh b/tools/testing/selftests/net/forwarding/ethtool_lib.sh deleted file mode 100644 index b9bfb45085..0000000000 --- a/tools/testing/selftests/net/forwarding/ethtool_lib.sh +++ /dev/null @@ -1,120 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0 - -speeds_arr_get() -{ - cmd='/ETHTOOL_LINK_MODE_[^[:space:]]*_BIT[[:space:]]+=[[:space:]]+/ \ - {sub(/,$/, "") \ - sub(/ETHTOOL_LINK_MODE_/,"") \ - sub(/_BIT/,"") \ - sub(/_Full/,"/Full") \ - sub(/_Half/,"/Half");\ - print "["$1"]="$3}' - - awk "${cmd}" /usr/include/linux/ethtool.h -} - -ethtool_set() -{ - local cmd="$@" - local out=$(ethtool -s $cmd 2>&1 | wc -l) - - check_err $out "error in configuration. $cmd" -} - -dev_linkmodes_params_get() -{ - local dev=$1; shift - local adver=$1; shift - local -a linkmodes_params - local param_count - local arr - - if (($adver)); then - mode="Advertised link modes" - else - mode="Supported link modes" - fi - - local -a dev_linkmodes=($(dev_speeds_get $dev 1 $adver)) - for ((i=0; i<${#dev_linkmodes[@]}; i++)); do - linkmodes_params[$i]=$(echo -e "${dev_linkmodes[$i]}" | \ - # Replaces all non numbers with spaces - sed -e 's/[^0-9]/ /g' | \ - # Squeeze spaces in sequence to 1 space - tr -s ' ') - # Count how many numbers were found in the linkmode - param_count=$(echo "${linkmodes_params[$i]}" | wc -w) - if [[ $param_count -eq 1 ]]; then - linkmodes_params[$i]="${linkmodes_params[$i]} 1" - elif [[ $param_count -ge 3 ]]; then - arr=(${linkmodes_params[$i]}) - # Take only first two params - linkmodes_params[$i]=$(echo "${arr[@]:0:2}") - fi - done - echo ${linkmodes_params[@]} -} - -dev_speeds_get() -{ - local dev=$1; shift - local with_mode=$1; shift - local adver=$1; shift - local speeds_str - - if (($adver)); then - mode="Advertised link modes" - else - mode="Supported link modes" - fi - - speeds_str=$(ethtool "$dev" | \ - # Snip everything before the link modes section. - sed -n '/'"$mode"':/,$p' | \ - # Quit processing the rest at the start of the next section. - # When checking, skip the header of this section (hence the 2,). - sed -n '2,${/^[\t][^ \t]/q};p' | \ - # Drop the section header of the current section. - cut -d':' -f2) - - local -a speeds_arr=($speeds_str) - if [[ $with_mode -eq 0 ]]; then - for ((i=0; i<${#speeds_arr[@]}; i++)); do - speeds_arr[$i]=${speeds_arr[$i]%base*} - done - fi - echo ${speeds_arr[@]} -} - -common_speeds_get() -{ - dev1=$1; shift - dev2=$1; shift - with_mode=$1; shift - adver=$1; shift - - local -a dev1_speeds=($(dev_speeds_get $dev1 $with_mode $adver)) - local -a dev2_speeds=($(dev_speeds_get $dev2 $with_mode $adver)) - - comm -12 \ - <(printf '%s\n' "${dev1_speeds[@]}" | sort -u) \ - <(printf '%s\n' "${dev2_speeds[@]}" | sort -u) -} - -different_speeds_get() -{ - local dev1=$1; shift - local dev2=$1; shift - local with_mode=$1; shift - local adver=$1; shift - - local -a speeds_arr - - speeds_arr=($(common_speeds_get $dev1 $dev2 $with_mode $adver)) - if [[ ${#speeds_arr[@]} < 2 ]]; then - check_err 1 "cannot check different speeds. There are not enough speeds" - fi - - echo ${speeds_arr[0]} ${speeds_arr[1]} -} diff --git a/tools/testing/selftests/net/forwarding/ethtool_mm.sh b/tools/testing/selftests/net/forwarding/ethtool_mm.sh deleted file mode 100755 index 50d5bfb17e..0000000000 --- a/tools/testing/selftests/net/forwarding/ethtool_mm.sh +++ /dev/null @@ -1,340 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0 - -ALL_TESTS=" - manual_with_verification_h1_to_h2 - manual_with_verification_h2_to_h1 - manual_without_verification_h1_to_h2 - manual_without_verification_h2_to_h1 - manual_failed_verification_h1_to_h2 - manual_failed_verification_h2_to_h1 - lldp -" - -NUM_NETIFS=2 -REQUIRE_MZ=no -PREEMPTIBLE_PRIO=0 -source lib.sh - -traffic_test() -{ - local if=$1; shift - local src=$1; shift - local num_pkts=10000 - local before= - local after= - local delta= - - if [ ${has_pmac_stats[$if]} = false ]; then - src="aggregate" - fi - - before=$(ethtool_std_stats_get $if "eth-mac" "FramesTransmittedOK" $src) - - $MZ $if -q -c $num_pkts -p 64 -b bcast -t ip -R $PREEMPTIBLE_PRIO - - after=$(ethtool_std_stats_get $if "eth-mac" "FramesTransmittedOK" $src) - - delta=$((after - before)) - - # Allow an extra 1% tolerance for random packets sent by the stack - [ $delta -ge $num_pkts ] && [ $delta -le $((num_pkts + 100)) ] -} - -manual_with_verification() -{ - local tx=$1; shift - local rx=$1; shift - - RET=0 - - # It isn't completely clear from IEEE 802.3-2018 Figure 99-5: Transmit - # Processing state diagram whether the "send_r" variable (send response - # to verification frame) should be taken into consideration while the - # MAC Merge TX direction is disabled. That being said, at least the - # NXP ENETC does not, and requires tx-enabled on in order to respond to - # the link partner's verification frames. - ethtool --set-mm $rx tx-enabled on - ethtool --set-mm $tx verify-enabled on tx-enabled on - - # Wait for verification to finish - sleep 1 - - ethtool --json --show-mm $tx | jq -r '.[]."verify-status"' | \ - grep -q 'SUCCEEDED' - check_err "$?" "Verification did not succeed" - - ethtool --json --show-mm $tx | jq -r '.[]."tx-active"' | grep -q 'true' - check_err "$?" "pMAC TX is not active" - - traffic_test $tx "pmac" - check_err "$?" "Traffic did not get sent through $tx's pMAC" - - ethtool --set-mm $tx verify-enabled off tx-enabled off - ethtool --set-mm $rx tx-enabled off - - log_test "Manual configuration with verification: $tx to $rx" -} - -manual_with_verification_h1_to_h2() -{ - manual_with_verification $h1 $h2 -} - -manual_with_verification_h2_to_h1() -{ - manual_with_verification $h2 $h1 -} - -manual_without_verification() -{ - local tx=$1; shift - local rx=$1; shift - - RET=0 - - ethtool --set-mm $tx verify-enabled off tx-enabled on - - ethtool --json --show-mm $tx | jq -r '.[]."verify-status"' | \ - grep -q 'DISABLED' - check_err "$?" "Verification is not disabled" - - ethtool --json --show-mm $tx | jq -r '.[]."tx-active"' | grep -q 'true' - check_err "$?" "pMAC TX is not active" - - traffic_test $tx "pmac" - check_err "$?" "Traffic did not get sent through $tx's pMAC" - - ethtool --set-mm $tx verify-enabled off tx-enabled off - - log_test "Manual configuration without verification: $tx to $rx" -} - -manual_without_verification_h1_to_h2() -{ - manual_without_verification $h1 $h2 -} - -manual_without_verification_h2_to_h1() -{ - manual_without_verification $h2 $h1 -} - -manual_failed_verification() -{ - local tx=$1; shift - local rx=$1; shift - - RET=0 - - ethtool --set-mm $rx pmac-enabled off - ethtool --set-mm $tx verify-enabled on tx-enabled on - - # Wait for verification to time out - sleep 1 - - ethtool --json --show-mm $tx | jq -r '.[]."verify-status"' | \ - grep -q 'SUCCEEDED' - check_fail "$?" "Verification succeeded when it shouldn't have" - - ethtool --json --show-mm $tx | jq -r '.[]."tx-active"' | grep -q 'true' - check_fail "$?" "pMAC TX is active when it shouldn't have" - - traffic_test $tx "emac" - check_err "$?" "Traffic did not get sent through $tx's eMAC" - - ethtool --set-mm $tx verify-enabled off tx-enabled off - ethtool --set-mm $rx pmac-enabled on - - log_test "Manual configuration with failed verification: $tx to $rx" -} - -manual_failed_verification_h1_to_h2() -{ - manual_failed_verification $h1 $h2 -} - -manual_failed_verification_h2_to_h1() -{ - manual_failed_verification $h2 $h1 -} - -smallest_supported_add_frag_size() -{ - local iface=$1 - local rx_min_frag_size= - - rx_min_frag_size=$(ethtool --json --show-mm $iface | \ - jq '.[]."rx-min-frag-size"') - - if [ $rx_min_frag_size -le 60 ]; then - echo 0 - elif [ $rx_min_frag_size -le 124 ]; then - echo 1 - elif [ $rx_min_frag_size -le 188 ]; then - echo 2 - elif [ $rx_min_frag_size -le 252 ]; then - echo 3 - else - echo "$iface: RX min frag size $rx_min_frag_size cannot be advertised over LLDP" - exit 1 - fi -} - -expected_add_frag_size() -{ - local iface=$1 - local requested=$2 - local min=$(smallest_supported_add_frag_size $iface) - - [ $requested -le $min ] && echo $min || echo $requested -} - -lldp_change_add_frag_size() -{ - local add_frag_size=$1 - local pattern= - - lldptool -T -i $h1 -V addEthCaps addFragSize=$add_frag_size >/dev/null - # Wait for TLVs to be received - sleep 2 - pattern=$(printf "Additional fragment size: %d" \ - $(expected_add_frag_size $h1 $add_frag_size)) - lldptool -i $h2 -t -n -V addEthCaps | grep -q "$pattern" -} - -lldp() -{ - RET=0 - - systemctl start lldpad - - # Configure the interfaces to receive and transmit LLDPDUs - lldptool -L -i $h1 adminStatus=rxtx >/dev/null - lldptool -L -i $h2 adminStatus=rxtx >/dev/null - - # Enable the transmission of Additional Ethernet Capabilities TLV - lldptool -T -i $h1 -V addEthCaps enableTx=yes >/dev/null - lldptool -T -i $h2 -V addEthCaps enableTx=yes >/dev/null - - # Wait for TLVs to be received - sleep 2 - - lldptool -i $h1 -t -n -V addEthCaps | \ - grep -q "Preemption capability active" - check_err "$?" "$h1 pMAC TX is not active" - - lldptool -i $h2 -t -n -V addEthCaps | \ - grep -q "Preemption capability active" - check_err "$?" "$h2 pMAC TX is not active" - - lldp_change_add_frag_size 3 - check_err "$?" "addFragSize 3" - - lldp_change_add_frag_size 2 - check_err "$?" "addFragSize 2" - - lldp_change_add_frag_size 1 - check_err "$?" "addFragSize 1" - - lldp_change_add_frag_size 0 - check_err "$?" "addFragSize 0" - - traffic_test $h1 "pmac" - check_err "$?" "Traffic did not get sent through $h1's pMAC" - - traffic_test $h2 "pmac" - check_err "$?" "Traffic did not get sent through $h2's pMAC" - - systemctl stop lldpad - - log_test "LLDP" -} - -h1_create() -{ - ip link set dev $h1 up - - tc qdisc add dev $h1 root mqprio num_tc 4 map 0 1 2 3 \ - queues 1@0 1@1 1@2 1@3 \ - fp P E E E \ - hw 1 - - ethtool --set-mm $h1 pmac-enabled on tx-enabled off verify-enabled off -} - -h2_create() -{ - ip link set dev $h2 up - - ethtool --set-mm $h2 pmac-enabled on tx-enabled off verify-enabled off - - tc qdisc add dev $h2 root mqprio num_tc 4 map 0 1 2 3 \ - queues 1@0 1@1 1@2 1@3 \ - fp P E E E \ - hw 1 -} - -h1_destroy() -{ - ethtool --set-mm $h1 pmac-enabled off tx-enabled off verify-enabled off - - tc qdisc del dev $h1 root - - ip link set dev $h1 down -} - -h2_destroy() -{ - tc qdisc del dev $h2 root - - ethtool --set-mm $h2 pmac-enabled off tx-enabled off verify-enabled off - - ip link set dev $h2 down -} - -setup_prepare() -{ - h1=${NETIFS[p1]} - h2=${NETIFS[p2]} - - h1_create - h2_create -} - -cleanup() -{ - pre_cleanup - - h2_destroy - h1_destroy -} - -check_ethtool_mm_support -check_tc_fp_support -require_command lldptool -bail_on_lldpad "autoconfigure the MAC Merge layer" "configure it manually" - -for netif in ${NETIFS[@]}; do - ethtool --show-mm $netif 2>&1 &> /dev/null - if [[ $? -ne 0 ]]; then - echo "SKIP: $netif does not support MAC Merge" - exit $ksft_skip - fi - - if check_ethtool_pmac_std_stats_support $netif eth-mac; then - has_pmac_stats[$netif]=true - else - has_pmac_stats[$netif]=false - echo "$netif does not report pMAC statistics, falling back to aggregate" - fi -done - -trap cleanup EXIT - -setup_prepare -setup_wait - -tests_run - -exit $EXIT_STATUS diff --git a/tools/testing/selftests/net/forwarding/ethtool_rmon.sh b/tools/testing/selftests/net/forwarding/ethtool_rmon.sh deleted file mode 100755 index e78776db85..0000000000 --- a/tools/testing/selftests/net/forwarding/ethtool_rmon.sh +++ /dev/null @@ -1,143 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0 - -ALL_TESTS=" - rmon_rx_histogram - rmon_tx_histogram -" - -NUM_NETIFS=2 -source lib.sh - -ETH_FCS_LEN=4 -ETH_HLEN=$((6+6+2)) - -declare -A netif_mtu - -ensure_mtu() -{ - local iface=$1; shift - local len=$1; shift - local current=$(ip -j link show dev $iface | jq -r '.[0].mtu') - local required=$((len - ETH_HLEN - ETH_FCS_LEN)) - - if [ $current -lt $required ]; then - ip link set dev $iface mtu $required || return 1 - fi -} - -bucket_test() -{ - local iface=$1; shift - local neigh=$1; shift - local set=$1; shift - local bucket=$1; shift - local len=$1; shift - local num_rx=10000 - local num_tx=20000 - local expected= - local before= - local after= - local delta= - - # Mausezahn does not include FCS bytes in its length - but the - # histogram counters do - len=$((len - ETH_FCS_LEN)) - - before=$(ethtool --json -S $iface --groups rmon | \ - jq -r ".[0].rmon[\"${set}-pktsNtoM\"][$bucket].val") - - # Send 10k one way and 20k in the other, to detect counters - # mapped to the wrong direction - $MZ $neigh -q -c $num_rx -p $len -a own -b bcast -d 10us - $MZ $iface -q -c $num_tx -p $len -a own -b bcast -d 10us - - after=$(ethtool --json -S $iface --groups rmon | \ - jq -r ".[0].rmon[\"${set}-pktsNtoM\"][$bucket].val") - - delta=$((after - before)) - - expected=$([ $set = rx ] && echo $num_rx || echo $num_tx) - - # Allow some extra tolerance for other packets sent by the stack - [ $delta -ge $expected ] && [ $delta -le $((expected + 100)) ] -} - -rmon_histogram() -{ - local iface=$1; shift - local neigh=$1; shift - local set=$1; shift - local nbuckets=0 - local step= - - RET=0 - - while read -r -a bucket; do - step="$set-pkts${bucket[0]}to${bucket[1]} on $iface" - - for if in $iface $neigh; do - if ! ensure_mtu $if ${bucket[0]}; then - log_test_xfail "$if does not support the required MTU for $step" - return - fi - done - - if ! bucket_test $iface $neigh $set $nbuckets ${bucket[0]}; then - check_err 1 "$step failed" - return 1 - fi - log_test "$step" - nbuckets=$((nbuckets + 1)) - done < <(ethtool --json -S $iface --groups rmon | \ - jq -r ".[0].rmon[\"${set}-pktsNtoM\"][]|[.low, .high]|@tsv" 2>/dev/null) - - if [ $nbuckets -eq 0 ]; then - log_test_xfail "$iface does not support $set histogram counters" - return - fi -} - -rmon_rx_histogram() -{ - rmon_histogram $h1 $h2 rx - rmon_histogram $h2 $h1 rx -} - -rmon_tx_histogram() -{ - rmon_histogram $h1 $h2 tx - rmon_histogram $h2 $h1 tx -} - -setup_prepare() -{ - h1=${NETIFS[p1]} - h2=${NETIFS[p2]} - - for iface in $h1 $h2; do - netif_mtu[$iface]=$(ip -j link show dev $iface | jq -r '.[0].mtu') - ip link set dev $iface up - done -} - -cleanup() -{ - pre_cleanup - - for iface in $h2 $h1; do - ip link set dev $iface \ - mtu ${netif_mtu[$iface]} \ - down - done -} - -check_ethtool_counter_group_support -trap cleanup EXIT - -setup_prepare -setup_wait - -tests_run - -exit $EXIT_STATUS diff --git a/tools/testing/selftests/net/forwarding/forwarding.config.sample b/tools/testing/selftests/net/forwarding/forwarding.config.sample index 1fc4f0242f..f1ca95e79a 100644 --- a/tools/testing/selftests/net/forwarding/forwarding.config.sample +++ b/tools/testing/selftests/net/forwarding/forwarding.config.sample @@ -3,51 +3,28 @@ ############################################################################## # Topology description. p1 looped back to p2, p3 to p4 and so on. -declare -A NETIFS -NETIFS[p1]=veth0 -NETIFS[p2]=veth1 -NETIFS[p3]=veth2 -NETIFS[p4]=veth3 -NETIFS[p5]=veth4 -NETIFS[p6]=veth5 -NETIFS[p7]=veth6 -NETIFS[p8]=veth7 -NETIFS[p9]=veth8 -NETIFS[p10]=veth9 +NETIFS=( + [p1]=veth0 + [p2]=veth1 + [p3]=veth2 + [p4]=veth3 + [p5]=veth4 + [p6]=veth5 + [p7]=veth6 + [p8]=veth7 + [p9]=veth8 + [p10]=veth9 +) # Port that does not have a cable connected. NETIF_NO_CABLE=eth8 ############################################################################## -# Defines +# In addition to the topology-related variables, it is also possible to override +# in this file other variables that net/lib.sh, net/forwarding/lib.sh or other +# libraries or selftests use. E.g.: -# IPv4 ping utility name -PING=ping -# IPv6 ping utility name. Some distributions use 'ping' for IPv6. PING6=ping6 -# Packet generator. Some distributions use 'mz'. MZ=mausezahn -# mausezahn delay between transmissions in microseconds. -MZ_DELAY=0 -# Time to wait after interfaces participating in the test are all UP WAIT_TIME=5 -# Whether to pause on failure or not. -PAUSE_ON_FAIL=no -# Whether to pause on cleanup or not. -PAUSE_ON_CLEANUP=no -# Type of network interface to create -NETIF_TYPE=veth -# Whether to create virtual interfaces (veth) or not -NETIF_CREATE=yes -# Timeout (in seconds) before ping exits regardless of how many packets have -# been sent or received -PING_TIMEOUT=5 -# Minimum ageing_time (in centiseconds) supported by hardware -LOW_AGEING_TIME=1000 -# Flag for tc match, supposed to be skip_sw/skip_hw which means do not process -# filter by software/hardware -TC_FLAG=skip_hw -# IPv6 traceroute utility name. -TROUTE6=traceroute6 - diff --git a/tools/testing/selftests/net/forwarding/hw_stats_l3.sh b/tools/testing/selftests/net/forwarding/hw_stats_l3.sh deleted file mode 100755 index 48584a5138..0000000000 --- a/tools/testing/selftests/net/forwarding/hw_stats_l3.sh +++ /dev/null @@ -1,340 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0 - -# +--------------------+ +----------------------+ -# | H1 | | H2 | -# | | | | -# | $h1.200 + | | + $h2.200 | -# | 192.0.2.1/28 | | | | 192.0.2.18/28 | -# | 2001:db8:1::1/64 | | | | 2001:db8:2::1/64 | -# | | | | | | -# | $h1 + | | + $h2 | -# | | | | | | -# +------------------|-+ +-|--------------------+ -# | | -# +------------------|-------------------------|--------------------+ -# | SW | | | -# | | | | -# | $rp1 + + $rp2 | -# | | | | -# | $rp1.200 + + $rp2.200 | -# | 192.0.2.2/28 192.0.2.17/28 | -# | 2001:db8:1::2/64 2001:db8:2::2/64 | -# | | -# +-----------------------------------------------------------------+ - -ALL_TESTS=" - ping_ipv4 - ping_ipv6 - test_stats_rx_ipv4 - test_stats_tx_ipv4 - test_stats_rx_ipv6 - test_stats_tx_ipv6 - respin_enablement - test_stats_rx_ipv4 - test_stats_tx_ipv4 - test_stats_rx_ipv6 - test_stats_tx_ipv6 - reapply_config - ping_ipv4 - ping_ipv6 - test_stats_rx_ipv4 - test_stats_tx_ipv4 - test_stats_rx_ipv6 - test_stats_tx_ipv6 - test_stats_report_rx - test_stats_report_tx - test_destroy_enabled - test_double_enable -" -NUM_NETIFS=4 -source lib.sh - -h1_create() -{ - simple_if_init $h1 - vlan_create $h1 200 v$h1 192.0.2.1/28 2001:db8:1::1/64 - ip route add 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2 - ip -6 route add 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2 -} - -h1_destroy() -{ - ip -6 route del 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2 - ip route del 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2 - vlan_destroy $h1 200 - simple_if_fini $h1 -} - -h2_create() -{ - simple_if_init $h2 - vlan_create $h2 200 v$h2 192.0.2.18/28 2001:db8:2::1/64 - ip route add 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.17 - ip -6 route add 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::2 -} - -h2_destroy() -{ - ip -6 route del 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::2 - ip route del 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.17 - vlan_destroy $h2 200 - simple_if_fini $h2 -} - -router_rp1_200_create() -{ - ip link add name $rp1.200 link $rp1 type vlan id 200 - ip link set dev $rp1.200 addrgenmode eui64 - ip link set dev $rp1.200 up - ip address add dev $rp1.200 192.0.2.2/28 - ip address add dev $rp1.200 2001:db8:1::2/64 - ip stats set dev $rp1.200 l3_stats on -} - -router_rp1_200_destroy() -{ - ip stats set dev $rp1.200 l3_stats off - ip address del dev $rp1.200 2001:db8:1::2/64 - ip address del dev $rp1.200 192.0.2.2/28 - ip link del dev $rp1.200 -} - -router_create() -{ - ip link set dev $rp1 up - router_rp1_200_create - - ip link set dev $rp2 up - vlan_create $rp2 200 "" 192.0.2.17/28 2001:db8:2::2/64 -} - -router_destroy() -{ - vlan_destroy $rp2 200 - ip link set dev $rp2 down - - router_rp1_200_destroy - ip link set dev $rp1 down -} - -setup_prepare() -{ - h1=${NETIFS[p1]} - rp1=${NETIFS[p2]} - - rp2=${NETIFS[p3]} - h2=${NETIFS[p4]} - - rp1mac=$(mac_get $rp1) - rp2mac=$(mac_get $rp2) - - vrf_prepare - - h1_create - h2_create - - router_create - - forwarding_enable -} - -cleanup() -{ - pre_cleanup - - forwarding_restore - - router_destroy - - h2_destroy - h1_destroy - - vrf_cleanup -} - -ping_ipv4() -{ - ping_test $h1.200 192.0.2.18 " IPv4" -} - -ping_ipv6() -{ - ping_test $h1.200 2001:db8:2::1 " IPv6" -} - -send_packets_rx_ipv4() -{ - # Send 21 packets instead of 20, because the first one might trap and go - # through the SW datapath, which might not bump the HW counter. - $MZ $h1.200 -c 21 -d 20msec -p 100 \ - -a own -b $rp1mac -A 192.0.2.1 -B 192.0.2.18 \ - -q -t udp sp=54321,dp=12345 -} - -send_packets_rx_ipv6() -{ - $MZ $h1.200 -6 -c 21 -d 20msec -p 100 \ - -a own -b $rp1mac -A 2001:db8:1::1 -B 2001:db8:2::1 \ - -q -t udp sp=54321,dp=12345 -} - -send_packets_tx_ipv4() -{ - $MZ $h2.200 -c 21 -d 20msec -p 100 \ - -a own -b $rp2mac -A 192.0.2.18 -B 192.0.2.1 \ - -q -t udp sp=54321,dp=12345 -} - -send_packets_tx_ipv6() -{ - $MZ $h2.200 -6 -c 21 -d 20msec -p 100 \ - -a own -b $rp2mac -A 2001:db8:2::1 -B 2001:db8:1::1 \ - -q -t udp sp=54321,dp=12345 -} - -___test_stats() -{ - local dir=$1; shift - local prot=$1; shift - - local a - local b - - a=$(hw_stats_get l3_stats $rp1.200 ${dir} packets) - send_packets_${dir}_${prot} - "$@" - b=$(busywait "$TC_HIT_TIMEOUT" until_counter_is ">= $a + 20" \ - hw_stats_get l3_stats $rp1.200 ${dir} packets) - check_err $? "Traffic not reflected in the counter: $a -> $b" -} - -__test_stats() -{ - local dir=$1; shift - local prot=$1; shift - - RET=0 - ___test_stats "$dir" "$prot" - log_test "Test $dir packets: $prot" -} - -test_stats_rx_ipv4() -{ - __test_stats rx ipv4 -} - -test_stats_tx_ipv4() -{ - __test_stats tx ipv4 -} - -test_stats_rx_ipv6() -{ - __test_stats rx ipv6 -} - -test_stats_tx_ipv6() -{ - __test_stats tx ipv6 -} - -# Make sure everything works well even after stats have been disabled and -# reenabled on the same device without touching the L3 configuration. -respin_enablement() -{ - log_info "Turning stats off and on again" - ip stats set dev $rp1.200 l3_stats off - ip stats set dev $rp1.200 l3_stats on -} - -# For the initial run, l3_stats is enabled on a completely set up netdevice. Now -# do it the other way around: enabling the L3 stats on an L2 netdevice, and only -# then apply the L3 configuration. -reapply_config() -{ - log_info "Reapplying configuration" - - router_rp1_200_destroy - - ip link add name $rp1.200 link $rp1 type vlan id 200 - ip link set dev $rp1.200 addrgenmode none - ip stats set dev $rp1.200 l3_stats on - ip link set dev $rp1.200 addrgenmode eui64 - ip link set dev $rp1.200 up - ip address add dev $rp1.200 192.0.2.2/28 - ip address add dev $rp1.200 2001:db8:1::2/64 -} - -__test_stats_report() -{ - local dir=$1; shift - local prot=$1; shift - - local a - local b - - RET=0 - - a=$(hw_stats_get l3_stats $rp1.200 ${dir} packets) - send_packets_${dir}_${prot} - ip address flush dev $rp1.200 - b=$(busywait "$TC_HIT_TIMEOUT" until_counter_is ">= $a + 20" \ - hw_stats_get l3_stats $rp1.200 ${dir} packets) - check_err $? "Traffic not reflected in the counter: $a -> $b" - log_test "Test ${dir} packets: stats pushed on loss of L3" - - ip stats set dev $rp1.200 l3_stats off - ip link del dev $rp1.200 - router_rp1_200_create -} - -test_stats_report_rx() -{ - __test_stats_report rx ipv4 -} - -test_stats_report_tx() -{ - __test_stats_report tx ipv4 -} - -test_destroy_enabled() -{ - RET=0 - - ip link del dev $rp1.200 - router_rp1_200_create - - log_test "Destroy l3_stats-enabled netdev" -} - -test_double_enable() -{ - RET=0 - ___test_stats rx ipv4 \ - ip stats set dev $rp1.200 l3_stats on - log_test "Test stat retention across a spurious enablement" -} - -trap cleanup EXIT - -setup_prepare -setup_wait - -used=$(ip -j stats show dev $rp1.200 group offload subgroup hw_stats_info | - jq '.[].info.l3_stats.used') -kind=$(ip -j -d link show dev $rp1 | - jq -r '.[].linkinfo.info_kind') -if [[ $used != true ]]; then - if [[ $kind == veth ]]; then - log_test_skip "l3_stats not offloaded on veth interface" - EXIT_STATUS=$ksft_skip - else - RET=1 log_test "l3_stats not offloaded" - fi -else - tests_run -fi - -exit $EXIT_STATUS diff --git a/tools/testing/selftests/net/forwarding/hw_stats_l3_gre.sh b/tools/testing/selftests/net/forwarding/hw_stats_l3_gre.sh deleted file mode 100755 index 7594bbb490..0000000000 --- a/tools/testing/selftests/net/forwarding/hw_stats_l3_gre.sh +++ /dev/null @@ -1,111 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0 - -# Test L3 stats on IP-in-IP GRE tunnel without key. - -# This test uses flat topology for IP tunneling tests. See ipip_lib.sh for more -# details. - -ALL_TESTS=" - ping_ipv4 - test_stats_rx - test_stats_tx -" -NUM_NETIFS=6 -source lib.sh -source ipip_lib.sh - -setup_prepare() -{ - h1=${NETIFS[p1]} - ol1=${NETIFS[p2]} - - ul1=${NETIFS[p3]} - ul2=${NETIFS[p4]} - - ol2=${NETIFS[p5]} - h2=${NETIFS[p6]} - - ol1mac=$(mac_get $ol1) - - forwarding_enable - vrf_prepare - h1_create - h2_create - sw1_flat_create gre $ol1 $ul1 - sw2_flat_create gre $ol2 $ul2 - ip stats set dev g1a l3_stats on - ip stats set dev g2a l3_stats on -} - -cleanup() -{ - pre_cleanup - - ip stats set dev g1a l3_stats off - ip stats set dev g2a l3_stats off - - sw2_flat_destroy $ol2 $ul2 - sw1_flat_destroy $ol1 $ul1 - h2_destroy - h1_destroy - - vrf_cleanup - forwarding_restore -} - -ping_ipv4() -{ - RET=0 - - ping_test $h1 192.0.2.18 " gre flat" -} - -send_packets_ipv4() -{ - # Send 21 packets instead of 20, because the first one might trap and go - # through the SW datapath, which might not bump the HW counter. - $MZ $h1 -c 21 -d 20msec -p 100 \ - -a own -b $ol1mac -A 192.0.2.1 -B 192.0.2.18 \ - -q -t udp sp=54321,dp=12345 -} - -test_stats() -{ - local dev=$1; shift - local dir=$1; shift - - local a - local b - - RET=0 - - a=$(hw_stats_get l3_stats $dev $dir packets) - send_packets_ipv4 - b=$(busywait "$TC_HIT_TIMEOUT" until_counter_is ">= $a + 20" \ - hw_stats_get l3_stats $dev $dir packets) - check_err $? "Traffic not reflected in the counter: $a -> $b" - - log_test "Test $dir packets: $prot" -} - -test_stats_tx() -{ - test_stats g1a tx -} - -test_stats_rx() -{ - test_stats g2a rx -} - -skip_on_veth - -trap cleanup EXIT - -setup_prepare -setup_wait - -tests_run - -exit $EXIT_STATUS diff --git a/tools/testing/selftests/net/forwarding/ipip_lib.sh b/tools/testing/selftests/net/forwarding/ipip_lib.sh index 30f36a57ba..01e62c4ac9 100644 --- a/tools/testing/selftests/net/forwarding/ipip_lib.sh +++ b/tools/testing/selftests/net/forwarding/ipip_lib.sh @@ -141,7 +141,6 @@ # | $h2 + | # | 192.0.2.18/28 | # +---------------------------+ -source lib.sh h1_create() { diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index e78f11140e..eabbdf00d8 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -2,33 +2,124 @@ # SPDX-License-Identifier: GPL-2.0 ############################################################################## +# Topology description. p1 looped back to p2, p3 to p4 and so on. + +declare -A NETIFS=( + [p1]=veth0 + [p2]=veth1 + [p3]=veth2 + [p4]=veth3 + [p5]=veth4 + [p6]=veth5 + [p7]=veth6 + [p8]=veth7 + [p9]=veth8 + [p10]=veth9 +) + +# Port that does not have a cable connected. +: "${NETIF_NO_CABLE:=eth8}" + +############################################################################## # Defines -# Can be overridden by the configuration file. -PING=${PING:=ping} -PING6=${PING6:=ping6} -MZ=${MZ:=mausezahn} -MZ_DELAY=${MZ_DELAY:=0} -ARPING=${ARPING:=arping} -TEAMD=${TEAMD:=teamd} -WAIT_TIME=${WAIT_TIME:=5} -PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no} -PAUSE_ON_CLEANUP=${PAUSE_ON_CLEANUP:=no} -NETIF_TYPE=${NETIF_TYPE:=veth} -NETIF_CREATE=${NETIF_CREATE:=yes} -MCD=${MCD:=smcrouted} -MC_CLI=${MC_CLI:=smcroutectl} -PING_COUNT=${PING_COUNT:=10} -PING_TIMEOUT=${PING_TIMEOUT:=5} -WAIT_TIMEOUT=${WAIT_TIMEOUT:=20} -INTERFACE_TIMEOUT=${INTERFACE_TIMEOUT:=600} -LOW_AGEING_TIME=${LOW_AGEING_TIME:=1000} -REQUIRE_JQ=${REQUIRE_JQ:=yes} -REQUIRE_MZ=${REQUIRE_MZ:=yes} -REQUIRE_MTOOLS=${REQUIRE_MTOOLS:=no} -STABLE_MAC_ADDRS=${STABLE_MAC_ADDRS:=no} -TCPDUMP_EXTRA_FLAGS=${TCPDUMP_EXTRA_FLAGS:=} -TROUTE6=${TROUTE6:=traceroute6} +# Networking utilities. +: "${PING:=ping}" +: "${PING6:=ping6}" # Some distros just use ping. +: "${ARPING:=arping}" +: "${TROUTE6:=traceroute6}" + +# Packet generator. +: "${MZ:=mausezahn}" # Some distributions use 'mz'. +: "${MZ_DELAY:=0}" + +# Host configuration tools. +: "${TEAMD:=teamd}" +: "${MCD:=smcrouted}" +: "${MC_CLI:=smcroutectl}" + +# Constants for netdevice bring-up: +# Default time in seconds to wait for an interface to come up before giving up +# and bailing out. Used during initial setup. +: "${INTERFACE_TIMEOUT:=600}" +# Like INTERFACE_TIMEOUT, but default for ad-hoc waiting in testing scripts. +: "${WAIT_TIMEOUT:=20}" +# Time to wait after interfaces participating in the test are all UP. +: "${WAIT_TIME:=5}" + +# Whether to pause on, respectively, after a failure and before cleanup. +: "${PAUSE_ON_FAIL:=no}" +: "${PAUSE_ON_CLEANUP:=no}" + +# Whether to create virtual interfaces, and what netdevice type they should be. +: "${NETIF_CREATE:=yes}" +: "${NETIF_TYPE:=veth}" + +# Constants for ping tests: +# How many packets should be sent. +: "${PING_COUNT:=10}" +# Timeout (in seconds) before ping exits regardless of how many packets have +# been sent or received +: "${PING_TIMEOUT:=5}" + +# Minimum ageing_time (in centiseconds) supported by hardware +: "${LOW_AGEING_TIME:=1000}" + +# Whether to check for availability of certain tools. +: "${REQUIRE_JQ:=yes}" +: "${REQUIRE_MZ:=yes}" +: "${REQUIRE_MTOOLS:=no}" + +# Whether to override MAC addresses on interfaces participating in the test. +: "${STABLE_MAC_ADDRS:=no}" + +# Flags for tcpdump +: "${TCPDUMP_EXTRA_FLAGS:=}" + +# Flags for TC filters. +: "${TC_FLAG:=skip_hw}" + +# Whether the machine is "slow" -- i.e. might be incapable of running tests +# involving heavy traffic. This might be the case on a debug kernel, a VM, or +# e.g. a low-power board. +: "${KSFT_MACHINE_SLOW:=no}" + +############################################################################## +# Find netifs by test-specified driver name + +driver_name_get() +{ + local dev=$1; shift + local driver_path="/sys/class/net/$dev/device/driver" + + if [[ -L $driver_path ]]; then + basename `realpath $driver_path` + fi +} + +netif_find_driver() +{ + local ifnames=`ip -j link show | jq -r ".[].ifname"` + local count=0 + + for ifname in $ifnames + do + local driver_name=`driver_name_get $ifname` + if [[ ! -z $driver_name && $driver_name == $NETIF_FIND_DRIVER ]]; then + count=$((count + 1)) + NETIFS[p$count]="$ifname" + fi + done +} + +# Whether to find netdevice according to the driver speficied by the importer +: "${NETIF_FIND_DRIVER:=}" + +if [[ $NETIF_FIND_DRIVER ]]; then + unset NETIFS + declare -A NETIFS + netif_find_driver +fi net_forwarding_dir=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")") @@ -179,22 +270,23 @@ check_port_mab_support() fi } -skip_on_veth() +if [[ "$(id -u)" -ne 0 ]]; then + echo "SKIP: need root privileges" + exit $ksft_skip +fi + +check_driver() { - local kind=$(ip -j -d link show dev ${NETIFS[p1]} | - jq -r '.[].linkinfo.info_kind') + local dev=$1; shift + local expected=$1; shift + local driver_name=`driver_name_get $dev` - if [[ $kind == veth ]]; then - echo "SKIP: Test cannot be run with veth pairs" + if [[ $driver_name != $expected ]]; then + echo "SKIP: expected driver $expected for $dev, got $driver_name instead" exit $ksft_skip fi } -if [[ "$(id -u)" -ne 0 ]]; then - echo "SKIP: need root privileges" - exit $ksft_skip -fi - if [[ "$CHECK_TC" = "yes" ]]; then check_tc_version fi @@ -209,6 +301,21 @@ require_command() fi } +# IPv6 support was added in v3.0 +check_mtools_version() +{ + local version="$(msend -v)" + local major + + version=${version##msend version } + major=$(echo $version | cut -d. -f1) + + if [ $major -lt 3 ]; then + echo "SKIP: expected mtools version 3.0, got $version" + exit $ksft_skip + fi +} + if [[ "$REQUIRE_JQ" = "yes" ]]; then require_command jq fi @@ -216,15 +323,10 @@ if [[ "$REQUIRE_MZ" = "yes" ]]; then require_command $MZ fi if [[ "$REQUIRE_MTOOLS" = "yes" ]]; then - # https://github.com/vladimiroltean/mtools/ - # patched for IPv6 support + # https://github.com/troglobit/mtools require_command msend require_command mreceive -fi - -if [[ ! -v NUM_NETIFS ]]; then - echo "SKIP: importer does not define \"NUM_NETIFS\"" - exit $ksft_skip + check_mtools_version fi ############################################################################## @@ -245,6 +347,23 @@ done ############################################################################## # Network interfaces configuration +if [[ ! -v NUM_NETIFS ]]; then + echo "SKIP: importer does not define \"NUM_NETIFS\"" + exit $ksft_skip +fi + +if (( NUM_NETIFS > ${#NETIFS[@]} )); then + echo "SKIP: Importer requires $NUM_NETIFS NETIFS, but only ${#NETIFS[@]} are defined (${NETIFS[@]})" + exit $ksft_skip +fi + +for i in $(seq ${#NETIFS[@]}); do + if [[ ! ${NETIFS[p$i]} ]]; then + echo "SKIP: NETIFS[p$i] not given" + exit $ksft_skip + fi +done + create_netif_veth() { local i @@ -343,13 +462,20 @@ ret_set_ksft_status() fi } +# Whether FAILs should be interpreted as XFAILs. Internal. +FAIL_TO_XFAIL= + check_err() { local err=$1 local msg=$2 if ((err)); then - ret_set_ksft_status $ksft_fail "$msg" + if [[ $FAIL_TO_XFAIL = yes ]]; then + ret_set_ksft_status $ksft_xfail "$msg" + else + ret_set_ksft_status $ksft_fail "$msg" + fi fi } @@ -374,6 +500,29 @@ check_err_fail() fi } +xfail_on_slow() +{ + if [[ $KSFT_MACHINE_SLOW = yes ]]; then + FAIL_TO_XFAIL=yes "$@" + else + "$@" + fi +} + +xfail_on_veth() +{ + local dev=$1; shift + local kind + + kind=$(ip -j -d link show dev $dev | + jq -r '.[].linkinfo.info_kind') + if [[ $kind = veth ]]; then + FAIL_TO_XFAIL=yes "$@" + else + "$@" + fi +} + log_test_result() { local test_name=$1; shift @@ -569,6 +718,19 @@ setup_wait() sleep $WAIT_TIME } +wait_for_dev() +{ + local dev=$1; shift + local timeout=${1:-$WAIT_TIMEOUT}; shift + + slowwait $timeout ip link show dev $dev &> /dev/null + if (( $? )); then + check_err 1 + log_test wait_for_dev "Interface $dev did not appear." + exit $EXIT_STATUS + fi +} + cmd_jq() { local cmd=$1 @@ -1995,6 +2157,8 @@ bail_on_lldpad() { local reason1="$1"; shift local reason2="$1"; shift + local caller=${FUNCNAME[1]} + local src=${BASH_SOURCE[1]} if systemctl is-active --quiet lldpad; then @@ -2015,7 +2179,8 @@ bail_on_lldpad() an environment variable ALLOW_LLDPAD to a non-empty string. EOF - exit 1 + log_test_skip $src:$caller + exit $EXIT_STATUS else return fi diff --git a/tools/testing/selftests/net/forwarding/lib_sh_test.sh b/tools/testing/selftests/net/forwarding/lib_sh_test.sh new file mode 100755 index 0000000000..ff2accccaf --- /dev/null +++ b/tools/testing/selftests/net/forwarding/lib_sh_test.sh @@ -0,0 +1,208 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# This tests the operation of lib.sh itself. + +ALL_TESTS=" + test_ret + test_exit_status +" +NUM_NETIFS=0 +source lib.sh + +# Simulated checks. + +do_test() +{ + local msg=$1; shift + + "$@" + check_err $? "$msg" +} + +tpass() +{ + do_test "tpass" true +} + +tfail() +{ + do_test "tfail" false +} + +txfail() +{ + FAIL_TO_XFAIL=yes do_test "txfail" false +} + +# Simulated tests. + +pass() +{ + RET=0 + do_test "true" true + log_test "true" +} + +fail() +{ + RET=0 + do_test "false" false + log_test "false" +} + +xfail() +{ + RET=0 + FAIL_TO_XFAIL=yes do_test "xfalse" false + log_test "xfalse" +} + +skip() +{ + RET=0 + log_test_skip "skip" +} + +slow_xfail() +{ + RET=0 + xfail_on_slow do_test "slow_false" false + log_test "slow_false" +} + +# lib.sh tests. + +ret_tests_run() +{ + local t + + RET=0 + retmsg= + for t in "$@"; do + $t + done + echo "$retmsg" + return $RET +} + +ret_subtest() +{ + local expect_ret=$1; shift + local expect_retmsg=$1; shift + local -a tests=( "$@" ) + + local status_names=(pass fail xfail xpass skip) + local ret + local out + + RET=0 + + # Run this in a subshell, so that our environment is intact. + out=$(ret_tests_run "${tests[@]}") + ret=$? + + (( ret == expect_ret )) + check_err $? "RET=$ret expected $expect_ret" + + [[ $out == $expect_retmsg ]] + check_err $? "retmsg=$out expected $expect_retmsg" + + log_test "RET $(echo ${tests[@]}) -> ${status_names[$ret]}" +} + +test_ret() +{ + ret_subtest $ksft_pass "" + + ret_subtest $ksft_pass "" tpass + ret_subtest $ksft_fail "tfail" tfail + ret_subtest $ksft_xfail "txfail" txfail + + ret_subtest $ksft_pass "" tpass tpass + ret_subtest $ksft_fail "tfail" tpass tfail + ret_subtest $ksft_xfail "txfail" tpass txfail + + ret_subtest $ksft_fail "tfail" tfail tpass + ret_subtest $ksft_xfail "txfail" txfail tpass + + ret_subtest $ksft_fail "tfail" tfail tfail + ret_subtest $ksft_fail "tfail" tfail txfail + + ret_subtest $ksft_fail "tfail" txfail tfail + + ret_subtest $ksft_xfail "txfail" txfail txfail +} + +exit_status_tests_run() +{ + EXIT_STATUS=0 + tests_run > /dev/null + return $EXIT_STATUS +} + +exit_status_subtest() +{ + local expect_exit_status=$1; shift + local tests=$1; shift + local what=$1; shift + + local status_names=(pass fail xfail xpass skip) + local exit_status + local out + + RET=0 + + # Run this in a subshell, so that our environment is intact. + out=$(TESTS="$tests" exit_status_tests_run) + exit_status=$? + + (( exit_status == expect_exit_status )) + check_err $? "EXIT_STATUS=$exit_status, expected $expect_exit_status" + + log_test "EXIT_STATUS $tests$what -> ${status_names[$exit_status]}" +} + +test_exit_status() +{ + exit_status_subtest $ksft_pass ":" + + exit_status_subtest $ksft_pass "pass" + exit_status_subtest $ksft_fail "fail" + exit_status_subtest $ksft_pass "xfail" + exit_status_subtest $ksft_skip "skip" + + exit_status_subtest $ksft_pass "pass pass" + exit_status_subtest $ksft_fail "pass fail" + exit_status_subtest $ksft_pass "pass xfail" + exit_status_subtest $ksft_skip "pass skip" + + exit_status_subtest $ksft_fail "fail pass" + exit_status_subtest $ksft_pass "xfail pass" + exit_status_subtest $ksft_skip "skip pass" + + exit_status_subtest $ksft_fail "fail fail" + exit_status_subtest $ksft_fail "fail xfail" + exit_status_subtest $ksft_fail "fail skip" + + exit_status_subtest $ksft_fail "xfail fail" + exit_status_subtest $ksft_fail "skip fail" + + exit_status_subtest $ksft_pass "xfail xfail" + exit_status_subtest $ksft_skip "xfail skip" + exit_status_subtest $ksft_skip "skip xfail" + + exit_status_subtest $ksft_skip "skip skip" + + KSFT_MACHINE_SLOW=yes \ + exit_status_subtest $ksft_pass "slow_xfail" ": slow" + + KSFT_MACHINE_SLOW=no \ + exit_status_subtest $ksft_fail "slow_xfail" ": fast" +} + +trap pre_cleanup EXIT + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/net/forwarding/local_termination.sh b/tools/testing/selftests/net/forwarding/local_termination.sh index c5b0cbc85b..4b364cdf3e 100755 --- a/tools/testing/selftests/net/forwarding/local_termination.sh +++ b/tools/testing/selftests/net/forwarding/local_termination.sh @@ -155,25 +155,30 @@ run_test() "$smac > $MACVLAN_ADDR, ethertype IPv4 (0x0800)" \ true - check_rcv $rcv_if_name "Unicast IPv4 to unknown MAC address" \ - "$smac > $UNKNOWN_UC_ADDR1, ethertype IPv4 (0x0800)" \ - false + xfail_on_veth $h1 \ + check_rcv $rcv_if_name "Unicast IPv4 to unknown MAC address" \ + "$smac > $UNKNOWN_UC_ADDR1, ethertype IPv4 (0x0800)" \ + false check_rcv $rcv_if_name "Unicast IPv4 to unknown MAC address, promisc" \ "$smac > $UNKNOWN_UC_ADDR2, ethertype IPv4 (0x0800)" \ true - check_rcv $rcv_if_name "Unicast IPv4 to unknown MAC address, allmulti" \ - "$smac > $UNKNOWN_UC_ADDR3, ethertype IPv4 (0x0800)" \ - false + xfail_on_veth $h1 \ + check_rcv $rcv_if_name \ + "Unicast IPv4 to unknown MAC address, allmulti" \ + "$smac > $UNKNOWN_UC_ADDR3, ethertype IPv4 (0x0800)" \ + false check_rcv $rcv_if_name "Multicast IPv4 to joined group" \ "$smac > $JOINED_MACV4_MC_ADDR, ethertype IPv4 (0x0800)" \ true - check_rcv $rcv_if_name "Multicast IPv4 to unknown group" \ - "$smac > $UNKNOWN_MACV4_MC_ADDR1, ethertype IPv4 (0x0800)" \ - false + xfail_on_veth $h1 \ + check_rcv $rcv_if_name \ + "Multicast IPv4 to unknown group" \ + "$smac > $UNKNOWN_MACV4_MC_ADDR1, ethertype IPv4 (0x0800)" \ + false check_rcv $rcv_if_name "Multicast IPv4 to unknown group, promisc" \ "$smac > $UNKNOWN_MACV4_MC_ADDR2, ethertype IPv4 (0x0800)" \ @@ -187,9 +192,10 @@ run_test() "$smac > $JOINED_MACV6_MC_ADDR, ethertype IPv6 (0x86dd)" \ true - check_rcv $rcv_if_name "Multicast IPv6 to unknown group" \ - "$smac > $UNKNOWN_MACV6_MC_ADDR1, ethertype IPv6 (0x86dd)" \ - false + xfail_on_veth $h1 \ + check_rcv $rcv_if_name "Multicast IPv6 to unknown group" \ + "$smac > $UNKNOWN_MACV6_MC_ADDR1, ethertype IPv6 (0x86dd)" \ + false check_rcv $rcv_if_name "Multicast IPv6 to unknown group, promisc" \ "$smac > $UNKNOWN_MACV6_MC_ADDR2, ethertype IPv6 (0x86dd)" \ diff --git a/tools/testing/selftests/net/forwarding/loopback.sh b/tools/testing/selftests/net/forwarding/loopback.sh deleted file mode 100755 index 8f4057310b..0000000000 --- a/tools/testing/selftests/net/forwarding/loopback.sh +++ /dev/null @@ -1,102 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0 - -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 - -ALL_TESTS="loopback_test" -NUM_NETIFS=2 -source tc_common.sh -source lib.sh - -h1_create() -{ - simple_if_init $h1 192.0.2.1/24 - tc qdisc add dev $h1 clsact -} - -h1_destroy() -{ - tc qdisc del dev $h1 clsact - simple_if_fini $h1 192.0.2.1/24 -} - -h2_create() -{ - simple_if_init $h2 -} - -h2_destroy() -{ - simple_if_fini $h2 -} - -loopback_test() -{ - RET=0 - - tc filter add dev $h1 ingress protocol arp pref 1 handle 101 flower \ - skip_hw arp_op reply arp_tip 192.0.2.1 action drop - - $MZ $h1 -c 1 -t arp -q - - tc_check_packets "dev $h1 ingress" 101 1 - check_fail $? "Matched on a filter without loopback setup" - - ethtool -K $h1 loopback on - check_err $? "Failed to enable loopback" - - setup_wait_dev $h1 - - $MZ $h1 -c 1 -t arp -q - - tc_check_packets "dev $h1 ingress" 101 1 - check_err $? "Did not match on filter with loopback" - - ethtool -K $h1 loopback off - check_err $? "Failed to disable loopback" - - $MZ $h1 -c 1 -t arp -q - - tc_check_packets "dev $h1 ingress" 101 2 - check_fail $? "Matched on a filter after loopback was removed" - - tc filter del dev $h1 ingress protocol arp pref 1 handle 101 flower - - log_test "loopback" -} - -setup_prepare() -{ - h1=${NETIFS[p1]} - h2=${NETIFS[p2]} - - vrf_prepare - - h1_create - h2_create - - if ethtool -k $h1 | grep loopback | grep -q fixed; then - log_test "SKIP: dev $h1 does not support loopback feature" - exit $ksft_skip - fi -} - -cleanup() -{ - pre_cleanup - - h2_destroy - h1_destroy - - vrf_cleanup -} - -trap cleanup EXIT - -setup_prepare -setup_wait - -tests_run - -exit $EXIT_STATUS diff --git a/tools/testing/selftests/net/forwarding/router_mpath_nh.sh b/tools/testing/selftests/net/forwarding/router_mpath_nh.sh index 3f0f5dc955..2ba44247c6 100755 --- a/tools/testing/selftests/net/forwarding/router_mpath_nh.sh +++ b/tools/testing/selftests/net/forwarding/router_mpath_nh.sh @@ -1,6 +1,41 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 +# +-------------------------+ +# | H1 | +# | $h1 + | +# | 192.0.2.2/24 | | +# | 2001:db8:1::2/64 | | +# +-------------------|-----+ +# | +# +-------------------|----------------------+ +# | | R1 | +# | $rp11 + | +# | 192.0.2.1/24 | +# | 2001:db8:1::1/64 | +# | | +# | + $rp12 + $rp13 | +# | | 169.254.2.12/24 | 169.254.3.13/24 | +# | | fe80:2::12/64 | fe80:3::13/64 | +# +--|--------------------|------------------+ +# | | +# +--|--------------------|------------------+ +# | + $rp22 + $rp23 | +# | 169.254.2.22/24 169.254.3.23/24 | +# | fe80:2::22/64 fe80:3::23/64 | +# | | +# | $rp21 + | +# | 198.51.100.1/24 | | +# | 2001:db8:2::1/64 | R2 | +# +-------------------|----------------------+ +# | +# +-------------------|-----+ +# | | | +# | $h2 + | +# | 198.51.100.2/24 | +# | 2001:db8:2::2/64 H2 | +# +-------------------------+ + ALL_TESTS=" ping_ipv4 ping_ipv6 diff --git a/tools/testing/selftests/net/forwarding/router_mpath_nh_lib.sh b/tools/testing/selftests/net/forwarding/router_mpath_nh_lib.sh index b2d2c6cecc..2903294d8b 100644 --- a/tools/testing/selftests/net/forwarding/router_mpath_nh_lib.sh +++ b/tools/testing/selftests/net/forwarding/router_mpath_nh_lib.sh @@ -56,21 +56,12 @@ nh_stats_test_dispatch_swhw() local group_id=$1; shift local mz="$@" - local used - nh_stats_do_test "$what" "$nh1_id" "$nh2_id" "$group_id" \ nh_stats_get "${mz[@]}" - used=$(ip -s -j -d nexthop show id $group_id | - jq '.[].hw_stats.used') - kind=$(ip -j -d link show dev $rp11 | - jq -r '.[].linkinfo.info_kind') - if [[ $used == true ]]; then + xfail_on_veth $rp11 \ nh_stats_do_test "HW $what" "$nh1_id" "$nh2_id" "$group_id" \ nh_stats_get_hw "${mz[@]}" - elif [[ $kind == veth ]]; then - log_test_xfail "HW stats not offloaded on veth topology" - fi } nh_stats_test_dispatch() @@ -83,7 +74,6 @@ nh_stats_test_dispatch() local mz="$@" local enabled - local kind if ! ip nexthop help 2>&1 | grep -q hw_stats; then log_test_skip "NH stats test: ip doesn't support HW stats" diff --git a/tools/testing/selftests/net/forwarding/router_mpath_nh_res.sh b/tools/testing/selftests/net/forwarding/router_mpath_nh_res.sh index 4b483d24ad..cd9e346436 100755 --- a/tools/testing/selftests/net/forwarding/router_mpath_nh_res.sh +++ b/tools/testing/selftests/net/forwarding/router_mpath_nh_res.sh @@ -1,6 +1,41 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 +# +-------------------------+ +# | H1 | +# | $h1 + | +# | 192.0.2.2/24 | | +# | 2001:db8:1::2/64 | | +# +-------------------|-----+ +# | +# +-------------------|----------------------+ +# | | R1 | +# | $rp11 + | +# | 192.0.2.1/24 | +# | 2001:db8:1::1/64 | +# | | +# | + $rp12 + $rp13 | +# | | 169.254.2.12/24 | 169.254.3.13/24 | +# | | fe80:2::12/64 | fe80:3::13/64 | +# +--|--------------------|------------------+ +# | | +# +--|--------------------|------------------+ +# | + $rp22 + $rp23 | +# | 169.254.2.22/24 169.254.3.23/24 | +# | fe80:2::22/64 fe80:3::23/64 | +# | | +# | $rp21 + | +# | 198.51.100.1/24 | | +# | 2001:db8:2::1/64 | R2 | +# +-------------------|----------------------+ +# | +# +-------------------|-----+ +# | | | +# | $h2 + | +# | 198.51.100.2/24 | +# | 2001:db8:2::2/64 H2 | +# +-------------------------+ + ALL_TESTS=" ping_ipv4 ping_ipv6 diff --git a/tools/testing/selftests/net/forwarding/router_nh.sh b/tools/testing/selftests/net/forwarding/router_nh.sh index f3a53738bd..92904b01ea 100755 --- a/tools/testing/selftests/net/forwarding/router_nh.sh +++ b/tools/testing/selftests/net/forwarding/router_nh.sh @@ -1,6 +1,20 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 +# +-------------------------+ +-------------------------+ +# | H1 | | H2 | +# | $h1 + | | $h2 + | +# | 192.0.2.2/24 | | | 198.51.100.2/24 | | +# | 2001:db8:1::2/64 | | | 2001:db8:2::2/64 | | +# +-------------------|-----+ +-------------------|-----+ +# | | +# +-------------------|----------------------------|-----+ +# | R1 | | | +# | $rp1 + $rp2 + | +# | 192.0.2.1/24 198.51.100.1/24 | +# | 2001:db8:1::1/64 2001:db8:2::1/64 | +# +------------------------------------------------------+ + ALL_TESTS=" ping_ipv4 ping_ipv6 diff --git a/tools/testing/selftests/net/forwarding/sch_ets_tests.sh b/tools/testing/selftests/net/forwarding/sch_ets_tests.sh index cdf689e994..f9d26a7911 100644 --- a/tools/testing/selftests/net/forwarding/sch_ets_tests.sh +++ b/tools/testing/selftests/net/forwarding/sch_ets_tests.sh @@ -199,25 +199,28 @@ ets_set_dwrr_two_bands() ets_test_strict() { ets_set_strict - ets_dwrr_test_01 - ets_dwrr_test_12 + xfail_on_slow ets_dwrr_test_01 + xfail_on_slow ets_dwrr_test_12 } ets_test_mixed() { ets_set_mixed - ets_dwrr_test_01 - ets_dwrr_test_12 + xfail_on_slow ets_dwrr_test_01 + xfail_on_slow ets_dwrr_test_12 } ets_test_dwrr() { ets_set_dwrr_uniform - ets_dwrr_test_012 + xfail_on_slow ets_dwrr_test_012 + ets_set_dwrr_varying - ets_dwrr_test_012 + xfail_on_slow ets_dwrr_test_012 + ets_change_quantum - ets_dwrr_test_012 + xfail_on_slow ets_dwrr_test_012 + ets_set_dwrr_two_bands - ets_dwrr_test_01 + xfail_on_slow ets_dwrr_test_01 } diff --git a/tools/testing/selftests/net/forwarding/sch_red.sh b/tools/testing/selftests/net/forwarding/sch_red.sh index 81f31179ac..17f2864456 100755 --- a/tools/testing/selftests/net/forwarding/sch_red.sh +++ b/tools/testing/selftests/net/forwarding/sch_red.sh @@ -451,35 +451,35 @@ uninstall_qdisc() ecn_test() { install_qdisc ecn - do_ecn_test $BACKLOG + xfail_on_slow do_ecn_test $BACKLOG uninstall_qdisc } ecn_nodrop_test() { install_qdisc ecn nodrop - do_ecn_nodrop_test $BACKLOG + xfail_on_slow do_ecn_nodrop_test $BACKLOG uninstall_qdisc } red_test() { install_qdisc - do_red_test $BACKLOG + xfail_on_slow do_red_test $BACKLOG uninstall_qdisc } red_qevent_test() { install_qdisc qevent early_drop block 10 - do_red_qevent_test $BACKLOG + xfail_on_slow do_red_qevent_test $BACKLOG uninstall_qdisc } ecn_qevent_test() { install_qdisc ecn qevent mark block 10 - do_ecn_qevent_test $BACKLOG + xfail_on_slow do_ecn_qevent_test $BACKLOG uninstall_qdisc } diff --git a/tools/testing/selftests/net/forwarding/sch_tbf_core.sh b/tools/testing/selftests/net/forwarding/sch_tbf_core.sh index d1f26cb7cd..9cd884d4a5 100644 --- a/tools/testing/selftests/net/forwarding/sch_tbf_core.sh +++ b/tools/testing/selftests/net/forwarding/sch_tbf_core.sh @@ -227,7 +227,7 @@ do_tbf_test() local nr=$(rate $t2 $t3 10) local nr_pct=$((100 * (nr - er) / er)) ((-5 <= nr_pct && nr_pct <= 5)) - check_err $? "Expected rate $(humanize $er), got $(humanize $nr), which is $nr_pct% off. Required accuracy is +-5%." + xfail_on_slow check_err $? "Expected rate $(humanize $er), got $(humanize $nr), which is $nr_pct% off. Required accuracy is +-5%." log_test "TC $((vlan - 10)): TBF rate ${mbit}Mbit" } diff --git a/tools/testing/selftests/net/forwarding/tc_common.sh b/tools/testing/selftests/net/forwarding/tc_common.sh index bce8bb8d2b..2e3326edfa 100644 --- a/tools/testing/selftests/net/forwarding/tc_common.sh +++ b/tools/testing/selftests/net/forwarding/tc_common.sh @@ -4,7 +4,7 @@ CHECK_TC="yes" # Can be overridden by the configuration file. See lib.sh -TC_HIT_TIMEOUT=${TC_HIT_TIMEOUT:=1000} # ms +: "${TC_HIT_TIMEOUT:=1000}" # ms tc_check_packets() { diff --git a/tools/testing/selftests/net/forwarding/tc_tunnel_key.sh b/tools/testing/selftests/net/forwarding/tc_tunnel_key.sh index 5a5dd90348..79775b10b9 100755 --- a/tools/testing/selftests/net/forwarding/tc_tunnel_key.sh +++ b/tools/testing/selftests/net/forwarding/tc_tunnel_key.sh @@ -1,7 +1,5 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 ALL_TESTS="tunnel_key_nofrag_test" diff --git a/tools/testing/selftests/net/gro.c b/tools/testing/selftests/net/gro.c index 353e1e867f..b2184847e3 100644 --- a/tools/testing/selftests/net/gro.c +++ b/tools/testing/selftests/net/gro.c @@ -93,6 +93,7 @@ static bool tx_socket = true; static int tcp_offset = -1; static int total_hdr_len = -1; static int ethhdr_proto = -1; +static const int num_flush_id_cases = 6; static void vlog(const char *fmt, ...) { @@ -119,6 +120,9 @@ static void setup_sock_filter(int fd) next_off = offsetof(struct ipv6hdr, nexthdr); ipproto_off = ETH_HLEN + next_off; + /* Overridden later if exthdrs are used: */ + opt_ipproto_off = ipproto_off; + if (strcmp(testname, "ip") == 0) { if (proto == PF_INET) optlen = sizeof(struct ip_timestamp); @@ -617,6 +621,113 @@ static void add_ipv6_exthdr(void *buf, void *optpkt, __u8 exthdr_type, char *ext iph->payload_len = htons(ntohs(iph->payload_len) + MIN_EXTHDR_SIZE); } +static void fix_ip4_checksum(struct iphdr *iph) +{ + iph->check = 0; + iph->check = checksum_fold(iph, sizeof(struct iphdr), 0); +} + +static void send_flush_id_case(int fd, struct sockaddr_ll *daddr, int tcase) +{ + static char buf1[MAX_HDR_LEN + PAYLOAD_LEN]; + static char buf2[MAX_HDR_LEN + PAYLOAD_LEN]; + static char buf3[MAX_HDR_LEN + PAYLOAD_LEN]; + bool send_three = false; + struct iphdr *iph1; + struct iphdr *iph2; + struct iphdr *iph3; + + iph1 = (struct iphdr *)(buf1 + ETH_HLEN); + iph2 = (struct iphdr *)(buf2 + ETH_HLEN); + iph3 = (struct iphdr *)(buf3 + ETH_HLEN); + + create_packet(buf1, 0, 0, PAYLOAD_LEN, 0); + create_packet(buf2, PAYLOAD_LEN, 0, PAYLOAD_LEN, 0); + create_packet(buf3, PAYLOAD_LEN * 2, 0, PAYLOAD_LEN, 0); + + switch (tcase) { + case 0: /* DF=1, Incrementing - should coalesce */ + iph1->frag_off |= htons(IP_DF); + iph1->id = htons(8); + + iph2->frag_off |= htons(IP_DF); + iph2->id = htons(9); + break; + + case 1: /* DF=1, Fixed - should coalesce */ + iph1->frag_off |= htons(IP_DF); + iph1->id = htons(8); + + iph2->frag_off |= htons(IP_DF); + iph2->id = htons(8); + break; + + case 2: /* DF=0, Incrementing - should coalesce */ + iph1->frag_off &= ~htons(IP_DF); + iph1->id = htons(8); + + iph2->frag_off &= ~htons(IP_DF); + iph2->id = htons(9); + break; + + case 3: /* DF=0, Fixed - should not coalesce */ + iph1->frag_off &= ~htons(IP_DF); + iph1->id = htons(8); + + iph2->frag_off &= ~htons(IP_DF); + iph2->id = htons(8); + break; + + case 4: /* DF=1, two packets incrementing, and one fixed - should + * coalesce only the first two packets + */ + iph1->frag_off |= htons(IP_DF); + iph1->id = htons(8); + + iph2->frag_off |= htons(IP_DF); + iph2->id = htons(9); + + iph3->frag_off |= htons(IP_DF); + iph3->id = htons(9); + send_three = true; + break; + + case 5: /* DF=1, two packets fixed, and one incrementing - should + * coalesce only the first two packets + */ + iph1->frag_off |= htons(IP_DF); + iph1->id = htons(8); + + iph2->frag_off |= htons(IP_DF); + iph2->id = htons(8); + + iph3->frag_off |= htons(IP_DF); + iph3->id = htons(9); + send_three = true; + break; + } + + fix_ip4_checksum(iph1); + fix_ip4_checksum(iph2); + write_packet(fd, buf1, total_hdr_len + PAYLOAD_LEN, daddr); + write_packet(fd, buf2, total_hdr_len + PAYLOAD_LEN, daddr); + + if (send_three) { + fix_ip4_checksum(iph3); + write_packet(fd, buf3, total_hdr_len + PAYLOAD_LEN, daddr); + } +} + +static void test_flush_id(int fd, struct sockaddr_ll *daddr, char *fin_pkt) +{ + for (int i = 0; i < num_flush_id_cases; i++) { + sleep(1); + send_flush_id_case(fd, daddr, i); + sleep(1); + write_packet(fd, fin_pkt, total_hdr_len, daddr); + } +} + static void send_ipv6_exthdr(int fd, struct sockaddr_ll *daddr, char *ext_data1, char *ext_data2) { static char buf[MAX_HDR_LEN + PAYLOAD_LEN]; @@ -935,6 +1046,8 @@ static void gro_sender(void) send_fragment4(txfd, &daddr); sleep(1); write_packet(txfd, fin_pkt, total_hdr_len, &daddr); + + test_flush_id(txfd, &daddr, fin_pkt); } else if (proto == PF_INET6) { sleep(1); send_fragment6(txfd, &daddr); @@ -1061,6 +1174,34 @@ static void gro_receiver(void) printf("fragmented ip4 doesn't coalesce: "); check_recv_pkts(rxfd, correct_payload, 2); + + /* is_atomic checks */ + printf("DF=1, Incrementing - should coalesce: "); + correct_payload[0] = PAYLOAD_LEN * 2; + check_recv_pkts(rxfd, correct_payload, 1); + + printf("DF=1, Fixed - should coalesce: "); + correct_payload[0] = PAYLOAD_LEN * 2; + check_recv_pkts(rxfd, correct_payload, 1); + + printf("DF=0, Incrementing - should coalesce: "); + correct_payload[0] = PAYLOAD_LEN * 2; + check_recv_pkts(rxfd, correct_payload, 1); + + printf("DF=0, Fixed - should not coalesce: "); + correct_payload[0] = PAYLOAD_LEN; + correct_payload[1] = PAYLOAD_LEN; + check_recv_pkts(rxfd, correct_payload, 2); + + printf("DF=1, 2 Incrementing and one fixed - should coalesce only first 2 packets: "); + correct_payload[0] = PAYLOAD_LEN * 2; + correct_payload[1] = PAYLOAD_LEN; + check_recv_pkts(rxfd, correct_payload, 2); + + printf("DF=1, 2 Fixed and one incrementing - should coalesce only first 2 packets: "); + correct_payload[0] = PAYLOAD_LEN * 2; + correct_payload[1] = PAYLOAD_LEN; + check_recv_pkts(rxfd, correct_payload, 2); } else if (proto == PF_INET6) { /* GRO doesn't check for ipv6 hop limit when flushing. * Hence no corresponding test to the ipv4 case. diff --git a/tools/testing/selftests/net/hsr/Makefile b/tools/testing/selftests/net/hsr/Makefile index 92c1d9d080..884cd2cc06 100644 --- a/tools/testing/selftests/net/hsr/Makefile +++ b/tools/testing/selftests/net/hsr/Makefile @@ -2,6 +2,7 @@ top_srcdir = ../../../../.. -TEST_PROGS := hsr_ping.sh +TEST_PROGS := hsr_ping.sh hsr_redbox.sh +TEST_FILES += hsr_common.sh include ../../lib.mk diff --git a/tools/testing/selftests/net/hsr/config b/tools/testing/selftests/net/hsr/config index 22061204fb..241542441c 100644 --- a/tools/testing/selftests/net/hsr/config +++ b/tools/testing/selftests/net/hsr/config @@ -2,3 +2,4 @@ CONFIG_IPV6=y CONFIG_NET_SCH_NETEM=m CONFIG_HSR=y CONFIG_VETH=y +CONFIG_BRIDGE=y diff --git a/tools/testing/selftests/net/hsr/hsr_common.sh b/tools/testing/selftests/net/hsr/hsr_common.sh new file mode 100644 index 0000000000..8e97b1f2e7 --- /dev/null +++ b/tools/testing/selftests/net/hsr/hsr_common.sh @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: GPL-2.0 +# Common code for HSR testing scripts + +source ../lib.sh +ret=0 +ksft_skip=4 + +# $1: IP address +is_v6() +{ + [ -z "${1##*:*}" ] +} + +do_ping() +{ + local netns="$1" + local connect_addr="$2" + local ping_args="-q -c 2" + + if is_v6 "${connect_addr}"; then + $ipv6 || return 0 + ping_args="${ping_args} -6" + fi + + ip netns exec ${netns} ping ${ping_args} $connect_addr >/dev/null + if [ $? -ne 0 ] ; then + echo "$netns -> $connect_addr connectivity [ FAIL ]" 1>&2 + ret=1 + return 1 + fi + + return 0 +} + +do_ping_long() +{ + local netns="$1" + local connect_addr="$2" + local ping_args="-q -c 10" + + if is_v6 "${connect_addr}"; then + $ipv6 || return 0 + ping_args="${ping_args} -6" + fi + + OUT="$(LANG=C ip netns exec ${netns} ping ${ping_args} $connect_addr | grep received)" + if [ $? -ne 0 ] ; then + echo "$netns -> $connect_addr ping [ FAIL ]" 1>&2 + ret=1 + return 1 + fi + + VAL="$(echo $OUT | cut -d' ' -f1-8)" + SED_VAL="$(echo ${VAL} | sed -r -e 's/([0-9]{2}).*([0-9]{2}).*[[:space:]]([0-9]+%).*/\1 transmitted \2 received \3 loss/')" + if [ "${SED_VAL}" != "10 transmitted 10 received 0% loss" ] + then + echo "$netns -> $connect_addr ping TEST [ FAIL ]" + echo "Expect to send and receive 10 packets and no duplicates." + echo "Full message: ${OUT}." + ret=1 + return 1 + fi + + return 0 +} + +stop_if_error() +{ + local msg="$1" + + if [ ${ret} -ne 0 ]; then + echo "FAIL: ${msg}" 1>&2 + exit ${ret} + fi +} + +check_prerequisites() +{ + ip -Version > /dev/null 2>&1 + if [ $? -ne 0 ];then + echo "SKIP: Could not run test without ip tool" + exit $ksft_skip + fi +} diff --git a/tools/testing/selftests/net/hsr/hsr_ping.sh b/tools/testing/selftests/net/hsr/hsr_ping.sh index 1c6457e546..3684b813b0 100755 --- a/tools/testing/selftests/net/hsr/hsr_ping.sh +++ b/tools/testing/selftests/net/hsr/hsr_ping.sh @@ -1,10 +1,10 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -ret=0 -ksft_skip=4 ipv6=true +source ./hsr_common.sh + optstring="h4" usage() { echo "Usage: $0 [OPTION]" @@ -27,88 +27,6 @@ while getopts "$optstring" option;do esac done -sec=$(date +%s) -rndh=$(printf %x $sec)-$(mktemp -u XXXXXX) -ns1="ns1-$rndh" -ns2="ns2-$rndh" -ns3="ns3-$rndh" - -cleanup() -{ - local netns - for netns in "$ns1" "$ns2" "$ns3" ;do - ip netns del $netns - done -} - -# $1: IP address -is_v6() -{ - [ -z "${1##*:*}" ] -} - -do_ping() -{ - local netns="$1" - local connect_addr="$2" - local ping_args="-q -c 2" - - if is_v6 "${connect_addr}"; then - $ipv6 || return 0 - ping_args="${ping_args} -6" - fi - - ip netns exec ${netns} ping ${ping_args} $connect_addr >/dev/null - if [ $? -ne 0 ] ; then - echo "$netns -> $connect_addr connectivity [ FAIL ]" 1>&2 - ret=1 - return 1 - fi - - return 0 -} - -do_ping_long() -{ - local netns="$1" - local connect_addr="$2" - local ping_args="-q -c 10" - - if is_v6 "${connect_addr}"; then - $ipv6 || return 0 - ping_args="${ping_args} -6" - fi - - OUT="$(LANG=C ip netns exec ${netns} ping ${ping_args} $connect_addr | grep received)" - if [ $? -ne 0 ] ; then - echo "$netns -> $connect_addr ping [ FAIL ]" 1>&2 - ret=1 - return 1 - fi - - VAL="$(echo $OUT | cut -d' ' -f1-8)" - if [ "$VAL" != "10 packets transmitted, 10 received, 0% packet loss," ] - then - echo "$netns -> $connect_addr ping TEST [ FAIL ]" - echo "Expect to send and receive 10 packets and no duplicates." - echo "Full message: ${OUT}." - ret=1 - return 1 - fi - - return 0 -} - -stop_if_error() -{ - local msg="$1" - - if [ ${ret} -ne 0 ]; then - echo "FAIL: ${msg}" 1>&2 - exit ${ret} - fi -} - do_complete_ping_test() { echo "INFO: Initial validation ping." @@ -248,27 +166,15 @@ setup_hsr_interfaces() ip -net "$ns3" link set hsr3 up } -ip -Version > /dev/null 2>&1 -if [ $? -ne 0 ];then - echo "SKIP: Could not run test without ip tool" - exit $ksft_skip -fi +check_prerequisites +setup_ns ns1 ns2 ns3 -trap cleanup EXIT - -for i in "$ns1" "$ns2" "$ns3" ;do - ip netns add $i || exit $ksft_skip - ip -net $i link set lo up -done +trap cleanup_all_ns EXIT setup_hsr_interfaces 0 do_complete_ping_test -cleanup -for i in "$ns1" "$ns2" "$ns3" ;do - ip netns add $i || exit $ksft_skip - ip -net $i link set lo up -done +setup_ns ns1 ns2 ns3 setup_hsr_interfaces 1 do_complete_ping_test diff --git a/tools/testing/selftests/net/hsr/hsr_redbox.sh b/tools/testing/selftests/net/hsr/hsr_redbox.sh new file mode 100755 index 0000000000..1f36785347 --- /dev/null +++ b/tools/testing/selftests/net/hsr/hsr_redbox.sh @@ -0,0 +1,121 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ipv6=false + +source ./hsr_common.sh + +do_complete_ping_test() +{ + echo "INFO: Initial validation ping (HSR-SAN/RedBox)." + # Each node has to be able to reach each one. + do_ping "${ns1}" 100.64.0.2 + do_ping "${ns2}" 100.64.0.1 + # Ping between SANs (test bridge) + do_ping "${ns4}" 100.64.0.51 + do_ping "${ns5}" 100.64.0.41 + # Ping from SANs to hsr1 (via hsr2) (and opposite) + do_ping "${ns3}" 100.64.0.1 + do_ping "${ns1}" 100.64.0.3 + do_ping "${ns1}" 100.64.0.41 + do_ping "${ns4}" 100.64.0.1 + do_ping "${ns1}" 100.64.0.51 + do_ping "${ns5}" 100.64.0.1 + stop_if_error "Initial validation failed." + + # Wait for MGNT HSR frames being received and nodes being + # merged. + sleep 5 + + echo "INFO: Longer ping test (HSR-SAN/RedBox)." + # Ping from SAN to hsr1 (via hsr2) + do_ping_long "${ns3}" 100.64.0.1 + # Ping from hsr1 (via hsr2) to SANs (and opposite) + do_ping_long "${ns1}" 100.64.0.3 + do_ping_long "${ns1}" 100.64.0.41 + do_ping_long "${ns4}" 100.64.0.1 + do_ping_long "${ns1}" 100.64.0.51 + do_ping_long "${ns5}" 100.64.0.1 + stop_if_error "Longer ping test failed." + + echo "INFO: All good." +} + +setup_hsr_interfaces() +{ + local HSRv="$1" + + echo "INFO: preparing interfaces for HSRv${HSRv} (HSR-SAN/RedBox)." +# +# IPv4 addresses (100.64.X.Y/24), and [X.Y] is presented on below diagram: +# +# +# |NS1 | |NS4 | +# | [0.1] | | | +# | /-- hsr1 --\ | | [0.41] | +# | ns1eth1 ns1eth2 | | ns4eth1 (SAN) | +# |------------------------| |-------------------| +# | | | +# | | | +# | | | +# |------------------------| |-------------------------------| +# | ns2eth1 ns2eth2 | | ns3eth2 | +# | \-- hsr2 --/ | | / | +# | [0.2] \ | | / | |------------| +# | ns2eth3 |---| ns3eth1 -- ns3br1 -- ns3eth3--|--| ns5eth1 | +# | (interlink)| | [0.3] [0.11] | | [0.51] | +# |NS2 (RedBOX) | |NS3 (BR) | | NS5 (SAN) | +# +# + # Check if iproute2 supports adding interlink port to hsrX device + ip link help hsr | grep -q INTERLINK + [ $? -ne 0 ] && { echo "iproute2: HSR interlink interface not supported!"; exit 0; } + + # Create interfaces for name spaces + ip link add ns1eth1 netns "${ns1}" type veth peer name ns2eth1 netns "${ns2}" + ip link add ns1eth2 netns "${ns1}" type veth peer name ns2eth2 netns "${ns2}" + ip link add ns2eth3 netns "${ns2}" type veth peer name ns3eth1 netns "${ns3}" + ip link add ns3eth2 netns "${ns3}" type veth peer name ns4eth1 netns "${ns4}" + ip link add ns3eth3 netns "${ns3}" type veth peer name ns5eth1 netns "${ns5}" + + sleep 1 + + ip -n "${ns1}" link set ns1eth1 up + ip -n "${ns1}" link set ns1eth2 up + + ip -n "${ns2}" link set ns2eth1 up + ip -n "${ns2}" link set ns2eth2 up + ip -n "${ns2}" link set ns2eth3 up + + ip -n "${ns3}" link add name ns3br1 type bridge + ip -n "${ns3}" link set ns3br1 up + ip -n "${ns3}" link set ns3eth1 master ns3br1 up + ip -n "${ns3}" link set ns3eth2 master ns3br1 up + ip -n "${ns3}" link set ns3eth3 master ns3br1 up + + ip -n "${ns4}" link set ns4eth1 up + ip -n "${ns5}" link set ns5eth1 up + + ip -net "${ns1}" link add name hsr1 type hsr slave1 ns1eth1 slave2 ns1eth2 supervision 45 version ${HSRv} proto 0 + ip -net "${ns2}" link add name hsr2 type hsr slave1 ns2eth1 slave2 ns2eth2 interlink ns2eth3 supervision 45 version ${HSRv} proto 0 + + ip -n "${ns1}" addr add 100.64.0.1/24 dev hsr1 + ip -n "${ns2}" addr add 100.64.0.2/24 dev hsr2 + ip -n "${ns3}" addr add 100.64.0.11/24 dev ns3br1 + ip -n "${ns3}" addr add 100.64.0.3/24 dev ns3eth1 + ip -n "${ns4}" addr add 100.64.0.41/24 dev ns4eth1 + ip -n "${ns5}" addr add 100.64.0.51/24 dev ns5eth1 + + ip -n "${ns1}" link set hsr1 up + ip -n "${ns2}" link set hsr2 up +} + +check_prerequisites +setup_ns ns1 ns2 ns3 ns4 ns5 + +trap cleanup_all_ns EXIT + +setup_hsr_interfaces 1 +do_complete_ping_test + +exit $ret diff --git a/tools/testing/selftests/net/ip_local_port_range.c b/tools/testing/selftests/net/ip_local_port_range.c index 193b82745f..29451d2244 100644 --- a/tools/testing/selftests/net/ip_local_port_range.c +++ b/tools/testing/selftests/net/ip_local_port_range.c @@ -359,7 +359,7 @@ TEST_F(ip_local_port_range, late_bind) struct sockaddr_in v4; struct sockaddr_in6 v6; } addr; - socklen_t addr_len; + socklen_t addr_len = 0; const int one = 1; int fd, err; __u32 range; diff --git a/tools/testing/selftests/net/lib.sh b/tools/testing/selftests/net/lib.sh index 16372ca167..9155c914c0 100644 --- a/tools/testing/selftests/net/lib.sh +++ b/tools/testing/selftests/net/lib.sh @@ -4,11 +4,16 @@ ############################################################################## # Defines -WAIT_TIMEOUT=${WAIT_TIMEOUT:=20} +: "${WAIT_TIMEOUT:=20}" + BUSYWAIT_TIMEOUT=$((WAIT_TIMEOUT * 1000)) # ms -# Kselftest framework requirement - SKIP code is 4. +# Kselftest framework constants. +ksft_pass=0 +ksft_fail=1 +ksft_xfail=2 ksft_skip=4 + # namespace list created by setup_ns NS_LIST=() diff --git a/tools/testing/selftests/net/lib/.gitignore b/tools/testing/selftests/net/lib/.gitignore new file mode 100644 index 0000000000..1ebc6187f4 --- /dev/null +++ b/tools/testing/selftests/net/lib/.gitignore @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +csum diff --git a/tools/testing/selftests/net/lib/Makefile b/tools/testing/selftests/net/lib/Makefile new file mode 100644 index 0000000000..82c3264b11 --- /dev/null +++ b/tools/testing/selftests/net/lib/Makefile @@ -0,0 +1,15 @@ +# SPDX-License-Identifier: GPL-2.0 + +CFLAGS = -Wall -Wl,--no-as-needed -O2 -g +CFLAGS += -I../../../../../usr/include/ $(KHDR_INCLUDES) +# Additional include paths needed by kselftest.h +CFLAGS += -I../../ + +TEST_FILES := ../../../../../Documentation/netlink/specs +TEST_FILES += ../../../../net/ynl + +TEST_GEN_FILES += csum + +TEST_INCLUDES := $(wildcard py/*.py) + +include ../../lib.mk diff --git a/tools/testing/selftests/net/csum.c b/tools/testing/selftests/net/lib/csum.c index 90eb06fefa..b9f3fc3c34 100644 --- a/tools/testing/selftests/net/csum.c +++ b/tools/testing/selftests/net/lib/csum.c @@ -682,7 +682,7 @@ static int recv_verify_packet_ipv6(void *nh, int len) } /* return whether auxdata includes TP_STATUS_CSUM_VALID */ -static bool recv_verify_packet_csum(struct msghdr *msg) +static uint32_t recv_get_packet_csum_status(struct msghdr *msg) { struct tpacket_auxdata *aux = NULL; struct cmsghdr *cm; @@ -706,7 +706,7 @@ static bool recv_verify_packet_csum(struct msghdr *msg) if (!aux) error(1, 0, "cmsg: no auxdata"); - return aux->tp_status & TP_STATUS_CSUM_VALID; + return aux->tp_status; } static int recv_packet(int fd) @@ -716,6 +716,7 @@ static int recv_packet(int fd) char ctrl[CMSG_SPACE(sizeof(struct tpacket_auxdata))]; struct pkt *buf = (void *)_buf; struct msghdr msg = {0}; + uint32_t tp_status; struct iovec iov; int len, ret; @@ -737,6 +738,17 @@ static int recv_packet(int fd) if (len == -1) error(1, errno, "recv p"); + tp_status = recv_get_packet_csum_status(&msg); + + /* GRO might coalesce randomized packets. Such GSO packets are + * then reinitialized for csum offload (CHECKSUM_PARTIAL), with + * a pseudo csum. Do not try to validate these checksums. + */ + if (tp_status & TP_STATUS_CSUMNOTREADY) { + fprintf(stderr, "cmsg: GSO packet has partial csum: skip\n"); + continue; + } + if (cfg_family == PF_INET6) ret = recv_verify_packet_ipv6(buf, len); else @@ -753,7 +765,7 @@ static int recv_packet(int fd) * Do not fail if kernel does not validate a good csum: * Absence of validation does not imply invalid. */ - if (recv_verify_packet_csum(&msg) && cfg_bad_csum) { + if (tp_status & TP_STATUS_CSUM_VALID && cfg_bad_csum) { fprintf(stderr, "cmsg: expected bad csum, pf_packet returns valid\n"); bad_validations++; } diff --git a/tools/testing/selftests/net/lib/py/__init__.py b/tools/testing/selftests/net/lib/py/__init__.py new file mode 100644 index 0000000000..b6d498d125 --- /dev/null +++ b/tools/testing/selftests/net/lib/py/__init__.py @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0 + +from .consts import KSRC +from .ksft import * +from .netns import NetNS +from .nsim import * +from .utils import * +from .ynl import NlError, YnlFamily, EthtoolFamily, NetdevFamily, RtnlFamily diff --git a/tools/testing/selftests/net/lib/py/consts.py b/tools/testing/selftests/net/lib/py/consts.py new file mode 100644 index 0000000000..f518ce79d8 --- /dev/null +++ b/tools/testing/selftests/net/lib/py/consts.py @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0 + +import sys +from pathlib import Path + +KSFT_DIR = (Path(__file__).parent / "../../..").resolve() +KSRC = (Path(__file__).parent / "../../../../../..").resolve() + +KSFT_MAIN_NAME = Path(sys.argv[0]).with_suffix("").name diff --git a/tools/testing/selftests/net/lib/py/ksft.py b/tools/testing/selftests/net/lib/py/ksft.py new file mode 100644 index 0000000000..4769b4eb1e --- /dev/null +++ b/tools/testing/selftests/net/lib/py/ksft.py @@ -0,0 +1,159 @@ +# SPDX-License-Identifier: GPL-2.0 + +import builtins +import inspect +import sys +import time +import traceback +from .consts import KSFT_MAIN_NAME + +KSFT_RESULT = None +KSFT_RESULT_ALL = True + + +class KsftFailEx(Exception): + pass + + +class KsftSkipEx(Exception): + pass + + +class KsftXfailEx(Exception): + pass + + +def ksft_pr(*objs, **kwargs): + print("#", *objs, **kwargs) + + +def _fail(*args): + global KSFT_RESULT + KSFT_RESULT = False + + frame = inspect.stack()[2] + ksft_pr("At " + frame.filename + " line " + str(frame.lineno) + ":") + ksft_pr(*args) + + +def ksft_eq(a, b, comment=""): + global KSFT_RESULT + if a != b: + _fail("Check failed", a, "!=", b, comment) + + +def ksft_true(a, comment=""): + if not a: + _fail("Check failed", a, "does not eval to True", comment) + + +def ksft_in(a, b, comment=""): + if a not in b: + _fail("Check failed", a, "not in", b, comment) + + +def ksft_ge(a, b, comment=""): + if a < b: + _fail("Check failed", a, "<", b, comment) + + +class ksft_raises: + def __init__(self, expected_type): + self.exception = None + self.expected_type = expected_type + + def __enter__(self): + return self + + def __exit__(self, exc_type, exc_val, exc_tb): + if exc_type is None: + _fail(f"Expected exception {str(self.expected_type.__name__)}, none raised") + elif self.expected_type != exc_type: + _fail(f"Expected exception {str(self.expected_type.__name__)}, raised {str(exc_type.__name__)}") + self.exception = exc_val + # Suppress the exception if its the expected one + return self.expected_type == exc_type + + +def ksft_busy_wait(cond, sleep=0.005, deadline=1, comment=""): + end = time.monotonic() + deadline + while True: + if cond(): + return + if time.monotonic() > end: + _fail("Waiting for condition timed out", comment) + return + time.sleep(sleep) + + +def ktap_result(ok, cnt=1, case="", comment=""): + global KSFT_RESULT_ALL + KSFT_RESULT_ALL = KSFT_RESULT_ALL and ok + + res = "" + if not ok: + res += "not " + res += "ok " + res += str(cnt) + " " + res += KSFT_MAIN_NAME + if case: + res += "." + str(case.__name__) + if comment: + res += " # " + comment + print(res) + + +def ksft_run(cases=None, globs=None, case_pfx=None, args=()): + cases = cases or [] + + if globs and case_pfx: + for key, value in globs.items(): + if not callable(value): + continue + for prefix in case_pfx: + if key.startswith(prefix): + cases.append(value) + break + + totals = {"pass": 0, "fail": 0, "skip": 0, "xfail": 0} + + print("KTAP version 1") + print("1.." + str(len(cases))) + + global KSFT_RESULT + cnt = 0 + for case in cases: + KSFT_RESULT = True + cnt += 1 + try: + case(*args) + except KsftSkipEx as e: + ktap_result(True, cnt, case, comment="SKIP " + str(e)) + totals['skip'] += 1 + continue + except KsftXfailEx as e: + ktap_result(True, cnt, case, comment="XFAIL " + str(e)) + totals['xfail'] += 1 + continue + except Exception as e: + tb = traceback.format_exc() + for line in tb.strip().split('\n'): + ksft_pr("Exception|", line) + ktap_result(False, cnt, case) + totals['fail'] += 1 + continue + + ktap_result(KSFT_RESULT, cnt, case) + if KSFT_RESULT: + totals['pass'] += 1 + else: + totals['fail'] += 1 + + print( + f"# Totals: pass:{totals['pass']} fail:{totals['fail']} xfail:{totals['xfail']} xpass:0 skip:{totals['skip']} error:0" + ) + + +def ksft_exit(): + global KSFT_RESULT_ALL + sys.exit(0 if KSFT_RESULT_ALL else 1) diff --git a/tools/testing/selftests/net/lib/py/netns.py b/tools/testing/selftests/net/lib/py/netns.py new file mode 100644 index 0000000000..ecff85f907 --- /dev/null +++ b/tools/testing/selftests/net/lib/py/netns.py @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: GPL-2.0 + +from .utils import ip +import random +import string + + +class NetNS: + def __init__(self, name=None): + if name: + self.name = name + else: + self.name = ''.join(random.choice(string.ascii_lowercase) for _ in range(8)) + ip('netns add ' + self.name) + + def __del__(self): + if self.name: + ip('netns del ' + self.name) + self.name = None + + def __enter__(self): + return self + + def __exit__(self, ex_type, ex_value, ex_tb): + self.__del__() + + def __str__(self): + return self.name + + def __repr__(self): + return f"NetNS({self.name})" diff --git a/tools/testing/selftests/net/lib/py/nsim.py b/tools/testing/selftests/net/lib/py/nsim.py new file mode 100644 index 0000000000..f571a8b313 --- /dev/null +++ b/tools/testing/selftests/net/lib/py/nsim.py @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: GPL-2.0 + +import json +import os +import random +import re +import time +from .utils import cmd, ip + + +class NetdevSim: + """ + Class for netdevsim netdevice and its attributes. + """ + + def __init__(self, nsimdev, port_index, ifname, ns=None): + # In case udev renamed the netdev to according to new schema, + # check if the name matches the port_index. + nsimnamere = re.compile(r"eni\d+np(\d+)") + match = nsimnamere.match(ifname) + if match and int(match.groups()[0]) != port_index + 1: + raise Exception("netdevice name mismatches the expected one") + + self.ifname = ifname + self.nsimdev = nsimdev + self.port_index = port_index + self.ns = ns + self.dfs_dir = "%s/ports/%u/" % (nsimdev.dfs_dir, port_index) + ret = ip("-j link show dev %s" % ifname, ns=ns) + self.dev = json.loads(ret.stdout)[0] + self.ifindex = self.dev["ifindex"] + + def dfs_write(self, path, val): + self.nsimdev.dfs_write(f'ports/{self.port_index}/' + path, val) + + +class NetdevSimDev: + """ + Class for netdevsim bus device and its attributes. + """ + @staticmethod + def ctrl_write(path, val): + fullpath = os.path.join("/sys/bus/netdevsim/", path) + with open(fullpath, "w") as f: + f.write(val) + + def dfs_write(self, path, val): + fullpath = os.path.join(f"/sys/kernel/debug/netdevsim/netdevsim{self.addr}/", path) + with open(fullpath, "w") as f: + f.write(val) + + def __init__(self, port_count=1, queue_count=1, ns=None): + # nsim will spawn in init_net, we'll set to actual ns once we switch it there + self.ns = None + + if not os.path.exists("/sys/bus/netdevsim"): + cmd("modprobe netdevsim") + + addr = random.randrange(1 << 15) + while True: + try: + self.ctrl_write("new_device", "%u %u %u" % (addr, port_count, queue_count)) + except OSError as e: + if e.errno == errno.ENOSPC: + addr = random.randrange(1 << 15) + continue + raise e + break + self.addr = addr + + # As probe of netdevsim device might happen from a workqueue, + # so wait here until all netdevs appear. + self.wait_for_netdevs(port_count) + + if ns: + cmd(f"devlink dev reload netdevsim/netdevsim{addr} netns {ns.name}") + self.ns = ns + + cmd("udevadm settle", ns=self.ns) + ifnames = self.get_ifnames() + + self.dfs_dir = "/sys/kernel/debug/netdevsim/netdevsim%u/" % addr + + self.nsims = [] + for port_index in range(port_count): + self.nsims.append(self._make_port(port_index, ifnames[port_index])) + + self.removed = False + + def __enter__(self): + return self + + def __exit__(self, ex_type, ex_value, ex_tb): + """ + __exit__ gets called at the end of a "with" block. + """ + self.remove() + + def _make_port(self, port_index, ifname): + return NetdevSim(self, port_index, ifname, self.ns) + + def get_ifnames(self): + ifnames = [] + listdir = cmd(f"ls /sys/bus/netdevsim/devices/netdevsim{self.addr}/net/", + ns=self.ns).stdout.split() + for ifname in listdir: + ifnames.append(ifname) + ifnames.sort() + return ifnames + + def wait_for_netdevs(self, port_count): + timeout = 5 + timeout_start = time.time() + + while True: + try: + ifnames = self.get_ifnames() + except FileNotFoundError as e: + ifnames = [] + if len(ifnames) == port_count: + break + if time.time() < timeout_start + timeout: + continue + raise Exception("netdevices did not appear within timeout") + + def remove(self): + if not self.removed: + self.ctrl_write("del_device", "%u" % (self.addr, )) + self.removed = True + + def remove_nsim(self, nsim): + self.nsims.remove(nsim) + self.ctrl_write("devices/netdevsim%u/del_port" % (self.addr, ), + "%u" % (nsim.port_index, )) diff --git a/tools/testing/selftests/net/lib/py/utils.py b/tools/testing/selftests/net/lib/py/utils.py new file mode 100644 index 0000000000..0540ea2492 --- /dev/null +++ b/tools/testing/selftests/net/lib/py/utils.py @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: GPL-2.0 + +import json as _json +import random +import re +import subprocess +import time + + +class cmd: + def __init__(self, comm, shell=True, fail=True, ns=None, background=False, host=None, timeout=5): + if ns: + comm = f'ip netns exec {ns} ' + comm + + self.stdout = None + self.stderr = None + self.ret = None + + self.comm = comm + if host: + self.proc = host.cmd(comm) + else: + self.proc = subprocess.Popen(comm, shell=shell, stdout=subprocess.PIPE, + stderr=subprocess.PIPE) + if not background: + self.process(terminate=False, fail=fail, timeout=timeout) + + def process(self, terminate=True, fail=None, timeout=5): + if fail is None: + fail = not terminate + + if terminate: + self.proc.terminate() + stdout, stderr = self.proc.communicate(timeout) + self.stdout = stdout.decode("utf-8") + self.stderr = stderr.decode("utf-8") + self.proc.stdout.close() + self.proc.stderr.close() + self.ret = self.proc.returncode + + if self.proc.returncode != 0 and fail: + if len(stderr) > 0 and stderr[-1] == "\n": + stderr = stderr[:-1] + raise Exception("Command failed: %s\nSTDOUT: %s\nSTDERR: %s" % + (self.proc.args, stdout, stderr)) + + +class bkg(cmd): + def __init__(self, comm, shell=True, fail=None, ns=None, host=None, + exit_wait=False): + super().__init__(comm, background=True, + shell=shell, fail=fail, ns=ns, host=host) + self.terminate = not exit_wait + self.check_fail = fail + + def __enter__(self): + return self + + def __exit__(self, ex_type, ex_value, ex_tb): + return self.process(terminate=self.terminate, fail=self.check_fail) + + +def tool(name, args, json=None, ns=None, host=None): + cmd_str = name + ' ' + if json: + cmd_str += '--json ' + cmd_str += args + cmd_obj = cmd(cmd_str, ns=ns, host=host) + if json: + return _json.loads(cmd_obj.stdout) + return cmd_obj + + +def ip(args, json=None, ns=None, host=None): + if ns: + args = f'-netns {ns} ' + args + return tool('ip', args, json=json, host=host) + + +def rand_port(): + """ + Get unprivileged port, for now just random, one day we may decide to check if used. + """ + return random.randint(10000, 65535) + + +def wait_port_listen(port, proto="tcp", ns=None, host=None, sleep=0.005, deadline=5): + end = time.monotonic() + deadline + + pattern = f":{port:04X} .* " + if proto == "tcp": # for tcp protocol additionally check the socket state + pattern += "0A" + pattern = re.compile(pattern) + + while True: + data = cmd(f'cat /proc/net/{proto}*', ns=ns, host=host, shell=True).stdout + for row in data.split("\n"): + if pattern.search(row): + return + if time.monotonic() > end: + raise Exception("Waiting for port listen timed out") + time.sleep(sleep) diff --git a/tools/testing/selftests/net/lib/py/ynl.py b/tools/testing/selftests/net/lib/py/ynl.py new file mode 100644 index 0000000000..1ace58370c --- /dev/null +++ b/tools/testing/selftests/net/lib/py/ynl.py @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: GPL-2.0 + +import sys +from pathlib import Path +from .consts import KSRC, KSFT_DIR +from .ksft import ksft_pr, ktap_result + +# Resolve paths +try: + if (KSFT_DIR / "kselftest-list.txt").exists(): + # Running in "installed" selftests + tools_full_path = KSFT_DIR + SPEC_PATH = KSFT_DIR / "net/lib/specs" + + sys.path.append(tools_full_path.as_posix()) + from net.lib.ynl.lib import YnlFamily, NlError + else: + # Running in tree + tools_full_path = KSRC / "tools" + SPEC_PATH = KSRC / "Documentation/netlink/specs" + + sys.path.append(tools_full_path.as_posix()) + from net.ynl.lib import YnlFamily, NlError +except ModuleNotFoundError as e: + ksft_pr("Failed importing `ynl` library from kernel sources") + ksft_pr(str(e)) + ktap_result(True, comment="SKIP") + sys.exit(4) + +# +# Wrapper classes, loading the right specs +# Set schema='' to avoid jsonschema validation, it's slow +# +class EthtoolFamily(YnlFamily): + def __init__(self): + super().__init__((SPEC_PATH / Path('ethtool.yaml')).as_posix(), + schema='') + + +class RtnlFamily(YnlFamily): + def __init__(self): + super().__init__((SPEC_PATH / Path('rt_link.yaml')).as_posix(), + schema='') + + +class NetdevFamily(YnlFamily): + def __init__(self): + super().__init__((SPEC_PATH / Path('netdev.yaml')).as_posix(), + schema='') diff --git a/tools/testing/selftests/net/mptcp/diag.sh b/tools/testing/selftests/net/mptcp/diag.sh index bc97ab33a0..776d43a692 100755 --- a/tools/testing/selftests/net/mptcp/diag.sh +++ b/tools/testing/selftests/net/mptcp/diag.sh @@ -200,6 +200,58 @@ chk_msk_cestab() "${expected}" "${msg}" "" } +msk_info_get_value() +{ + local port="${1}" + local info="${2}" + + ss -N "${ns}" -inHM dport "${port}" | \ + mptcp_lib_get_info_value "${info}" "${info}" +} + +chk_msk_info() +{ + local port="${1}" + local info="${2}" + local cnt="${3}" + local msg="....chk ${info}" + local delta_ms=250 # half what we waited before, just to be sure + local now + + now=$(msk_info_get_value "${port}" "${info}") + + mptcp_lib_print_title "${msg}" + if { [ -z "${cnt}" ] || [ -z "${now}" ]; } && + ! mptcp_lib_expect_all_features; then + mptcp_lib_pr_skip "Feature probably not supported" + mptcp_lib_result_skip "${msg}" + elif [ "$((cnt + delta_ms))" -lt "${now}" ]; then + mptcp_lib_pr_ok + mptcp_lib_result_pass "${msg}" + else + mptcp_lib_pr_fail "value of ${info} changed by $((now - cnt))ms," \ + "expected at least ${delta_ms}ms" + mptcp_lib_result_fail "${msg}" + ret=${KSFT_FAIL} + fi +} + +chk_last_time_info() +{ + local port="${1}" + local data_sent data_recv ack_recv + + data_sent=$(msk_info_get_value "${port}" "last_data_sent") + data_recv=$(msk_info_get_value "${port}" "last_data_recv") + ack_recv=$(msk_info_get_value "${port}" "last_ack_recv") + + sleep 0.5 # wait to check after if the timestamps difference + + chk_msk_info "${port}" "last_data_sent" "${data_sent}" + chk_msk_info "${port}" "last_data_recv" "${data_recv}" + chk_msk_info "${port}" "last_ack_recv" "${ack_recv}" +} + wait_connected() { local listener_ns="${1}" @@ -233,6 +285,7 @@ echo "b" | \ 127.0.0.1 >/dev/null & wait_connected $ns 10000 chk_msk_nr 2 "after MPC handshake " +chk_last_time_info 10000 chk_msk_remote_key_nr 2 "....chk remote_key" chk_msk_fallback_nr 0 "....chk no fallback" chk_msk_inuse 2 diff --git a/tools/testing/selftests/net/mptcp/mptcp_connect.c b/tools/testing/selftests/net/mptcp/mptcp_connect.c index d2043ec3bf..4209b95690 100644 --- a/tools/testing/selftests/net/mptcp/mptcp_connect.c +++ b/tools/testing/selftests/net/mptcp/mptcp_connect.c @@ -1115,11 +1115,11 @@ again: return 1; } - if (--cfg_repeat > 0) { - if (cfg_input) - close(fd); + if (cfg_input) + close(fd); + + if (--cfg_repeat > 0) goto again; - } return 0; } diff --git a/tools/testing/selftests/net/mptcp/mptcp_connect.sh b/tools/testing/selftests/net/mptcp/mptcp_connect.sh index 4131f3263a..b77fb7065b 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_connect.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_connect.sh @@ -147,7 +147,7 @@ cleanup() mptcp_lib_check_mptcp mptcp_lib_check_kallsyms -mptcp_lib_check_tools ip +mptcp_lib_check_tools ip tc sin=$(mktemp) sout=$(mktemp) diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 2290125f6d..a3293043c8 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -31,7 +31,6 @@ timeout_poll=30 timeout_test=$((timeout_poll * 2 + 1)) capture=false checksum=false -ip_mptcp=0 check_invert=0 validate_checksum=false init=0 @@ -142,7 +141,7 @@ init() { mptcp_lib_check_mptcp mptcp_lib_check_kallsyms - mptcp_lib_check_tools ip ss "${iptables}" "${ip6tables}" + mptcp_lib_check_tools ip tc ss "${iptables}" "${ip6tables}" sin=$(mktemp) sout=$(mktemp) @@ -610,173 +609,65 @@ kill_events_pids() pm_nl_set_limits() { - local ns=$1 - local addrs=$2 - local subflows=$3 - - if [ $ip_mptcp -eq 1 ]; then - ip -n $ns mptcp limits set add_addr_accepted $addrs subflows $subflows - else - ip netns exec $ns ./pm_nl_ctl limits $addrs $subflows - fi + mptcp_lib_pm_nl_set_limits "${@}" } pm_nl_add_endpoint() { - local ns=$1 - local addr=$2 - local flags _flags - local port _port - local dev _dev - local id _id - local nr=2 - - local p - for p in "${@}" - do - if [ $p = "flags" ]; then - eval _flags=\$"$nr" - [ -n "$_flags" ]; flags="flags $_flags" - fi - if [ $p = "dev" ]; then - eval _dev=\$"$nr" - [ -n "$_dev" ]; dev="dev $_dev" - fi - if [ $p = "id" ]; then - eval _id=\$"$nr" - [ -n "$_id" ]; id="id $_id" - fi - if [ $p = "port" ]; then - eval _port=\$"$nr" - [ -n "$_port" ]; port="port $_port" - fi - - nr=$((nr + 1)) - done - - if [ $ip_mptcp -eq 1 ]; then - ip -n $ns mptcp endpoint add $addr ${_flags//","/" "} $dev $id $port - else - ip netns exec $ns ./pm_nl_ctl add $addr $flags $dev $id $port - fi + mptcp_lib_pm_nl_add_endpoint "${@}" } pm_nl_del_endpoint() { - local ns=$1 - local id=$2 - local addr=$3 - - if [ $ip_mptcp -eq 1 ]; then - [ $id -ne 0 ] && addr='' - ip -n $ns mptcp endpoint delete id $id $addr - else - ip netns exec $ns ./pm_nl_ctl del $id $addr - fi + mptcp_lib_pm_nl_del_endpoint "${@}" } pm_nl_flush_endpoint() { - local ns=$1 - - if [ $ip_mptcp -eq 1 ]; then - ip -n $ns mptcp endpoint flush - else - ip netns exec $ns ./pm_nl_ctl flush - fi + mptcp_lib_pm_nl_flush_endpoint "${@}" } pm_nl_show_endpoints() { - local ns=$1 - - if [ $ip_mptcp -eq 1 ]; then - ip -n $ns mptcp endpoint show - else - ip netns exec $ns ./pm_nl_ctl dump - fi + mptcp_lib_pm_nl_show_endpoints "${@}" } pm_nl_change_endpoint() { - local ns=$1 - local id=$2 - local flags=$3 - - if [ $ip_mptcp -eq 1 ]; then - ip -n $ns mptcp endpoint change id $id ${flags//","/" "} - else - ip netns exec $ns ./pm_nl_ctl set id $id flags $flags - fi + mptcp_lib_pm_nl_change_endpoint "${@}" } pm_nl_check_endpoint() { - local line expected_line local msg="$1" local ns=$2 local addr=$3 - local _flags="" - local flags - local _port - local port - local dev - local _id - local id + local flags dev id port print_check "${msg}" shift 3 while [ -n "$1" ]; do - if [ $1 = "flags" ]; then - _flags=$2 - [ -n "$_flags" ]; flags="flags $_flags" - shift - elif [ $1 = "dev" ]; then - [ -n "$2" ]; dev="dev $2" + case "${1}" in + "flags" | "dev" | "id" | "port") + eval "${1}"="${2}" shift - elif [ $1 = "id" ]; then - _id=$2 - [ -n "$_id" ]; id="id $_id" - shift - elif [ $1 = "port" ]; then - _port=$2 - [ -n "$_port" ]; port=" port $_port" - shift - fi + ;; + *) + ;; + esac shift done - if [ -z "$id" ]; then - test_fail "bad test - missing endpoint id" + if [ -z "${id}" ]; then + fail_test "bad test - missing endpoint id" return fi - if [ $ip_mptcp -eq 1 ]; then - # get line and trim trailing whitespace - line=$(ip -n $ns mptcp endpoint show $id) - line="${line% }" - # the dump order is: address id flags port dev - [ -n "$addr" ] && expected_line="$addr" - expected_line+=" $id" - [ -n "$_flags" ] && expected_line+=" ${_flags//","/" "}" - [ -n "$dev" ] && expected_line+=" $dev" - [ -n "$port" ] && expected_line+=" $port" - else - line=$(ip netns exec $ns ./pm_nl_ctl get $_id) - # the dump order is: id flags dev address port - expected_line="$id" - [ -n "$flags" ] && expected_line+=" $flags" - [ -n "$dev" ] && expected_line+=" $dev" - [ -n "$addr" ] && expected_line+=" $addr" - [ -n "$_port" ] && expected_line+=" $_port" - fi - if [ "$line" = "$expected_line" ]; then - print_ok - else - fail_test "expected '$expected_line' found '$line'" - fi + check_output "mptcp_lib_pm_nl_get_endpoint ${ns} ${id}" \ + "$(mptcp_lib_pm_nl_format_endpoints \ + "${id},${addr},${flags//","/" "},${dev},${port}")" } pm_nl_set_endpoint() @@ -1524,18 +1415,28 @@ chk_add_nr() local add_nr=$1 local echo_nr=$2 local port_nr=${3:-0} - local syn_nr=${4:-$port_nr} - local syn_ack_nr=${5:-$port_nr} - local ack_nr=${6:-$port_nr} - local mis_syn_nr=${7:-0} - local mis_ack_nr=${8:-0} + local ns_invert=${4:-""} + local syn_nr=$port_nr + local syn_ack_nr=$port_nr + local ack_nr=$port_nr + local mis_syn_nr=0 + local mis_ack_nr=0 + local ns_tx=$ns1 + local ns_rx=$ns2 + local extra_msg="" local count local timeout - timeout=$(ip netns exec $ns1 sysctl -n net.mptcp.add_addr_timeout) + if [[ $ns_invert = "invert" ]]; then + ns_tx=$ns2 + ns_rx=$ns1 + extra_msg="invert" + fi + + timeout=$(ip netns exec ${ns_tx} sysctl -n net.mptcp.add_addr_timeout) print_check "add" - count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtAddAddr") + count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtAddAddr") if [ -z "$count" ]; then print_skip # if the test configured a short timeout tolerate greater then expected @@ -1547,7 +1448,7 @@ chk_add_nr() fi print_check "echo" - count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtEchoAdd") + count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtEchoAdd") if [ -z "$count" ]; then print_skip elif [ "$count" != "$echo_nr" ]; then @@ -1558,7 +1459,7 @@ chk_add_nr() if [ $port_nr -gt 0 ]; then print_check "pt" - count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtPortAdd") + count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtPortAdd") if [ -z "$count" ]; then print_skip elif [ "$count" != "$port_nr" ]; then @@ -1568,7 +1469,7 @@ chk_add_nr() fi print_check "syn" - count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinPortSynRx") + count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMPJoinPortSynRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$syn_nr" ]; then @@ -1579,7 +1480,7 @@ chk_add_nr() fi print_check "synack" - count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtMPJoinPortSynAckRx") + count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtMPJoinPortSynAckRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$syn_ack_nr" ]; then @@ -1590,7 +1491,7 @@ chk_add_nr() fi print_check "ack" - count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinPortAckRx") + count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMPJoinPortAckRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$ack_nr" ]; then @@ -1601,7 +1502,7 @@ chk_add_nr() fi print_check "syn" - count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMismatchPortSynRx") + count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMismatchPortSynRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$mis_syn_nr" ]; then @@ -1612,7 +1513,7 @@ chk_add_nr() fi print_check "ack" - count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMismatchPortAckRx") + count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMismatchPortAckRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$mis_ack_nr" ]; then @@ -1622,6 +1523,8 @@ chk_add_nr() print_ok fi fi + + print_info "$extra_msg" } chk_add_tx_nr() @@ -1743,6 +1646,8 @@ chk_prio_nr() { local mp_prio_nr_tx=$1 local mp_prio_nr_rx=$2 + local mpj_syn=$3 + local mpj_syn_ack=$4 local count print_check "ptx" @@ -1764,6 +1669,26 @@ chk_prio_nr() else print_ok fi + + print_check "syn backup" + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinSynBackupRx") + if [ -z "$count" ]; then + print_skip + elif [ "$count" != "$mpj_syn" ]; then + fail_test "got $count JOIN[s] syn with Backup expected $mpj_syn" + else + print_ok + fi + + print_check "synack backup" + count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtMPJoinSynAckBackupRx") + if [ -z "$count" ]; then + print_skip + elif [ "$count" != "$mpj_syn_ack" ]; then + fail_test "got $count JOIN[s] synack with Backup expected $mpj_syn_ack" + else + print_ok + fi } chk_subflow_nr() @@ -2064,6 +1989,21 @@ signal_address_tests() chk_add_nr 1 1 fi + # uncommon: subflow and signal flags on the same endpoint + # or because the user wrongly picked both, but still expects the client + # to create additional subflows + if reset "subflow and signal together"; then + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 0 2 + pm_nl_add_endpoint $ns2 10.0.3.2 flags signal,subflow + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 1 1 1 + chk_add_nr 1 1 0 invert # only initiated by ns2 + chk_add_nr 0 0 0 # none initiated by ns1 + chk_rst_nr 0 0 invert # no RST sent by the client + chk_rst_nr 0 0 # no RST sent by the server + fi + # accept and use add_addr with additional subflows if reset "multiple subflows and signal"; then pm_nl_set_limits $ns1 0 3 @@ -2721,33 +2661,46 @@ backup_tests() sflags=nobackup speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 - chk_prio_nr 0 1 + chk_prio_nr 0 1 1 0 fi # single address, backup if reset "single address, backup" && continue_if mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then pm_nl_set_limits $ns1 0 1 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup + pm_nl_set_limits $ns2 1 1 + sflags=nobackup speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 1 1 1 + chk_add_nr 1 1 + chk_prio_nr 1 0 0 1 + fi + + # single address, switch to backup + if reset "single address, switch to backup" && + continue_if mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then + pm_nl_set_limits $ns1 0 1 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal pm_nl_set_limits $ns2 1 1 sflags=backup speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 1 1 - chk_prio_nr 1 1 + chk_prio_nr 1 1 0 0 fi # single address with port, backup if reset "single address with port, backup" && continue_if mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then pm_nl_set_limits $ns1 0 1 - pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup port 10100 pm_nl_set_limits $ns2 1 1 - sflags=backup speed=slow \ + sflags=nobackup speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 1 1 - chk_prio_nr 1 1 + chk_prio_nr 1 0 0 1 fi if reset "mpc backup" && @@ -2756,17 +2709,26 @@ backup_tests() speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 - chk_prio_nr 0 1 + chk_prio_nr 0 1 0 0 fi if reset "mpc backup both sides" && continue_if mptcp_lib_kallsyms_doesnt_have "T mptcp_subflow_send_ack$"; then - pm_nl_add_endpoint $ns1 10.0.1.1 flags subflow,backup + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 1 2 + pm_nl_add_endpoint $ns1 10.0.1.1 flags signal,backup pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow,backup + + # 10.0.2.2 (non-backup) -> 10.0.1.1 (backup) + pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow + # 10.0.1.2 (backup) -> 10.0.2.1 (non-backup) + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + ip -net "$ns2" route add 10.0.2.1 via 10.0.1.1 dev ns2eth1 # force this path + speed=slow \ run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr 0 0 0 - chk_prio_nr 1 1 + chk_join_nr 2 2 2 + chk_prio_nr 1 1 1 1 fi if reset "mpc switch to backup" && @@ -2775,7 +2737,7 @@ backup_tests() sflags=backup speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 - chk_prio_nr 0 1 + chk_prio_nr 0 1 0 0 fi if reset "mpc switch to backup both sides" && @@ -2785,7 +2747,7 @@ backup_tests() sflags=backup speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 - chk_prio_nr 1 1 + chk_prio_nr 1 1 0 0 fi } @@ -3162,7 +3124,7 @@ fullmesh_tests() addr_nr_ns2=1 sflags=backup,fullmesh speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 - chk_prio_nr 0 1 + chk_prio_nr 0 1 1 0 chk_rm_nr 0 1 fi @@ -3175,7 +3137,7 @@ fullmesh_tests() sflags=nobackup,nofullmesh speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 - chk_prio_nr 0 1 + chk_prio_nr 0 1 1 0 chk_rm_nr 0 1 fi } @@ -3427,7 +3389,7 @@ userspace_tests() sflags=backup speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 0 - chk_prio_nr 0 0 + chk_prio_nr 0 0 0 0 fi # userspace pm type prevents rm_addr @@ -3711,7 +3673,7 @@ while getopts "${all_tests_args}cCih" opt; do checksum=true ;; i) - ip_mptcp=1 + mptcp_lib_set_ip_mptcp ;; h) usage diff --git a/tools/testing/selftests/net/mptcp/mptcp_lib.sh b/tools/testing/selftests/net/mptcp/mptcp_lib.sh index d529b4b37a..6ffa9b7a32 100644 --- a/tools/testing/selftests/net/mptcp/mptcp_lib.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_lib.sh @@ -21,8 +21,10 @@ declare -rx MPTCP_LIB_AF_INET6=10 MPTCP_LIB_SUBTESTS=() MPTCP_LIB_SUBTESTS_DUPLICATED=0 +MPTCP_LIB_SUBTEST_FLAKY=0 MPTCP_LIB_TEST_COUNTER=0 MPTCP_LIB_TEST_FORMAT="%02u %-50s" +MPTCP_LIB_IP_MPTCP=0 # only if supported (or forced) and not disabled, see no-color.org if { [ -t 1 ] || [ "${SELFTESTS_MPTCP_LIB_COLOR_FORCE:-}" = "1" ]; } && @@ -40,6 +42,16 @@ else readonly MPTCP_LIB_COLOR_RESET= fi +# SELFTESTS_MPTCP_LIB_OVERRIDE_FLAKY env var can be set not to ignore errors +# from subtests marked as flaky +mptcp_lib_override_flaky() { + [ "${SELFTESTS_MPTCP_LIB_OVERRIDE_FLAKY:-}" = 1 ] +} + +mptcp_lib_subtest_is_flaky() { + [ "${MPTCP_LIB_SUBTEST_FLAKY}" = 1 ] && ! mptcp_lib_override_flaky +} + # $1: color, $2: text mptcp_lib_print_color() { echo -e "${MPTCP_LIB_START_PRINT:-}${*}${MPTCP_LIB_COLOR_RESET}" @@ -71,7 +83,16 @@ mptcp_lib_pr_skip() { } mptcp_lib_pr_fail() { - mptcp_lib_print_err "[FAIL]${1:+ ${*}}" + local title cmt + + if mptcp_lib_subtest_is_flaky; then + title="IGNO" + cmt=" (flaky)" + else + title="FAIL" + fi + + mptcp_lib_print_err "[${title}]${cmt}${1:+ ${*}}" } mptcp_lib_pr_info() { @@ -207,7 +228,13 @@ mptcp_lib_result_pass() { # $1: test name mptcp_lib_result_fail() { - __mptcp_lib_result_add "not ok" "${1}" + if mptcp_lib_subtest_is_flaky; then + # It might sound better to use 'not ok # TODO' or 'ok # SKIP', + # but some CIs don't understand 'TODO' and treat SKIP as errors. + __mptcp_lib_result_add "ok" "${1} # IGNORE Flaky" + else + __mptcp_lib_result_add "not ok" "${1}" + fi } # $1: test name @@ -384,6 +411,12 @@ mptcp_lib_check_tools() { exit ${KSFT_SKIP} fi ;; + "tc") + if ! tc -help &> /dev/null; then + mptcp_lib_pr_skip "Could not run test without tc tool" + exit ${KSFT_SKIP} + fi + ;; "ss") if ! ss -h | grep -q MPTCP; then mptcp_lib_pr_skip "ss tool does not support MPTCP" @@ -505,3 +538,131 @@ mptcp_lib_verify_listener_events() { mptcp_lib_check_expected "type" "family" "saddr" "sport" || rc="${?}" return "${rc}" } + +mptcp_lib_set_ip_mptcp() { + MPTCP_LIB_IP_MPTCP=1 +} + +mptcp_lib_is_ip_mptcp() { + [ "${MPTCP_LIB_IP_MPTCP}" = "1" ] +} + +# format: <id>,<ip>,<flags>,<dev> +mptcp_lib_pm_nl_format_endpoints() { + local entry id ip flags dev port + + for entry in "${@}"; do + IFS=, read -r id ip flags dev port <<< "${entry}" + if mptcp_lib_is_ip_mptcp; then + echo -n "${ip}" + [ -n "${port}" ] && echo -n " port ${port}" + echo -n " id ${id}" + [ -n "${flags}" ] && echo -n " ${flags}" + [ -n "${dev}" ] && echo -n " dev ${dev}" + echo " " # always a space at the end + else + echo -n "id ${id}" + echo -n " flags ${flags//" "/","}" + [ -n "${dev}" ] && echo -n " dev ${dev}" + echo -n " ${ip}" + [ -n "${port}" ] && echo -n " ${port}" + echo "" + fi + done +} + +mptcp_lib_pm_nl_get_endpoint() { + local ns=${1} + local id=${2} + + if mptcp_lib_is_ip_mptcp; then + ip -n "${ns}" mptcp endpoint show id "${id}" + else + ip netns exec "${ns}" ./pm_nl_ctl get "${id}" + fi +} + +mptcp_lib_pm_nl_set_limits() { + local ns=${1} + local addrs=${2} + local subflows=${3} + + if mptcp_lib_is_ip_mptcp; then + ip -n "${ns}" mptcp limits set add_addr_accepted "${addrs}" subflows "${subflows}" + else + ip netns exec "${ns}" ./pm_nl_ctl limits "${addrs}" "${subflows}" + fi +} + +mptcp_lib_pm_nl_add_endpoint() { + local ns=${1} + local addr=${2} + local flags dev id port + local nr=2 + + local p + for p in "${@}"; do + case "${p}" in + "flags" | "dev" | "id" | "port") + eval "${p}"=\$"${nr}" + ;; + esac + + nr=$((nr + 1)) + done + + if mptcp_lib_is_ip_mptcp; then + # shellcheck disable=SC2086 # blanks in flags, no double quote + ip -n "${ns}" mptcp endpoint add "${addr}" ${flags//","/" "} \ + ${dev:+dev "${dev}"} ${id:+id "${id}"} ${port:+port "${port}"} + else + ip netns exec "${ns}" ./pm_nl_ctl add "${addr}" ${flags:+flags "${flags}"} \ + ${dev:+dev "${dev}"} ${id:+id "${id}"} ${port:+port "${port}"} + fi +} + +mptcp_lib_pm_nl_del_endpoint() { + local ns=${1} + local id=${2} + local addr=${3} + + if mptcp_lib_is_ip_mptcp; then + [ "${id}" -ne 0 ] && addr='' + ip -n "${ns}" mptcp endpoint delete id "${id}" ${addr:+"${addr}"} + else + ip netns exec "${ns}" ./pm_nl_ctl del "${id}" "${addr}" + fi +} + +mptcp_lib_pm_nl_flush_endpoint() { + local ns=${1} + + if mptcp_lib_is_ip_mptcp; then + ip -n "${ns}" mptcp endpoint flush + else + ip netns exec "${ns}" ./pm_nl_ctl flush + fi +} + +mptcp_lib_pm_nl_show_endpoints() { + local ns=${1} + + if mptcp_lib_is_ip_mptcp; then + ip -n "${ns}" mptcp endpoint show + else + ip netns exec "${ns}" ./pm_nl_ctl dump + fi +} + +mptcp_lib_pm_nl_change_endpoint() { + local ns=${1} + local id=${2} + local flags=${3} + + if mptcp_lib_is_ip_mptcp; then + # shellcheck disable=SC2086 # blanks in flags, no double quote + ip -n "${ns}" mptcp endpoint change id "${id}" ${flags//","/" "} + else + ip netns exec "${ns}" ./pm_nl_ctl set id "${id}" flags "${flags}" + fi +} diff --git a/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh b/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh index e2d70c1878..68899a303a 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh @@ -22,6 +22,28 @@ ns1="" ns2="" ns_sbox="" +usage() { + echo "Usage: $0 [ -i ] [ -h ]" + echo -e "\t-i: use 'ip mptcp' instead of 'pm_nl_ctl'" + echo -e "\t-h: help" +} + +while getopts "hi" option;do + case "$option" in + "h") + usage "$0" + exit ${KSFT_PASS} + ;; + "i") + mptcp_lib_set_ip_mptcp + ;; + "?") + usage "$0" + exit ${KSFT_FAIL} + ;; + esac +done + add_mark_rules() { local ns=$1 @@ -58,15 +80,15 @@ init() # let $ns2 reach any $ns1 address from any interface ip -net "$ns2" route add default via 10.0.$i.1 dev ns2eth$i metric 10$i - ip netns exec $ns1 ./pm_nl_ctl add 10.0.$i.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add dead:beef:$i::1 flags signal + mptcp_lib_pm_nl_add_endpoint "${ns1}" "10.0.${i}.1" flags signal + mptcp_lib_pm_nl_add_endpoint "${ns1}" "dead:beef:${i}::1" flags signal - ip netns exec $ns2 ./pm_nl_ctl add 10.0.$i.2 flags signal - ip netns exec $ns2 ./pm_nl_ctl add dead:beef:$i::2 flags signal + mptcp_lib_pm_nl_add_endpoint "${ns2}" "10.0.${i}.2" flags signal + mptcp_lib_pm_nl_add_endpoint "${ns2}" "dead:beef:${i}::2" flags signal done - ip netns exec $ns1 ./pm_nl_ctl limits 8 8 - ip netns exec $ns2 ./pm_nl_ctl limits 8 8 + mptcp_lib_pm_nl_set_limits "${ns1}" 8 8 + mptcp_lib_pm_nl_set_limits "${ns2}" 8 8 add_mark_rules $ns1 1 add_mark_rules $ns2 2 diff --git a/tools/testing/selftests/net/mptcp/pm_netlink.sh b/tools/testing/selftests/net/mptcp/pm_netlink.sh index 6ab8c5d363..2757378b1b 100755 --- a/tools/testing/selftests/net/mptcp/pm_netlink.sh +++ b/tools/testing/selftests/net/mptcp/pm_netlink.sh @@ -1,28 +1,28 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -# Double quotes to prevent globbing and word splitting is recommended in new -# code but we accept it, especially because there were too many before having -# address all other issues detected by shellcheck. -#shellcheck disable=SC2086 - . "$(dirname "${0}")/mptcp_lib.sh" ret=0 usage() { - echo "Usage: $0 [ -h ]" + echo "Usage: $0 [ -i ] [ -h ]" + echo -e "\t-i: use 'ip mptcp' instead of 'pm_nl_ctl'" + echo -e "\t-h: help" } -optstring=h +optstring=hi while getopts "$optstring" option;do case "$option" in "h") - usage $0 + usage "$0" exit ${KSFT_PASS} ;; + "i") + mptcp_lib_set_ip_mptcp + ;; "?") - usage $0 + usage "$0" exit ${KSFT_FAIL} ;; esac @@ -35,7 +35,7 @@ err=$(mktemp) #shellcheck disable=SC2317 cleanup() { - rm -f $err + rm -f "${err}" mptcp_lib_ns_exit "${ns1}" } @@ -46,6 +46,76 @@ trap cleanup EXIT mptcp_lib_ns_init ns1 +format_limits() { + local accept="${1}" + local subflows="${2}" + + if mptcp_lib_is_ip_mptcp; then + # with a space at the end + printf "add_addr_accepted %d subflows %d \n" "${accept}" "${subflows}" + else + printf "accept %d\nsubflows %d\n" "${accept}" "${subflows}" + fi +} + +get_limits() { + if mptcp_lib_is_ip_mptcp; then + ip -n "${ns1}" mptcp limits + else + ip netns exec "${ns1}" ./pm_nl_ctl limits + fi +} + +format_endpoints() { + mptcp_lib_pm_nl_format_endpoints "${@}" +} + +get_endpoint() { + # shellcheck disable=SC2317 # invoked indirectly + mptcp_lib_pm_nl_get_endpoint "${ns1}" "${@}" +} + +change_address() { + local addr=${1} + local flags=${2} + + if mptcp_lib_is_ip_mptcp; then + ip -n "${ns1}" mptcp endpoint change "${addr}" "${flags}" + else + ip netns exec "${ns1}" ./pm_nl_ctl set "${addr}" flags "${flags}" + fi +} + +set_limits() +{ + mptcp_lib_pm_nl_set_limits "${ns1}" "${@}" +} + +add_endpoint() +{ + mptcp_lib_pm_nl_add_endpoint "${ns1}" "${@}" +} + +del_endpoint() +{ + mptcp_lib_pm_nl_del_endpoint "${ns1}" "${@}" +} + +flush_endpoint() +{ + mptcp_lib_pm_nl_flush_endpoint "${ns1}" +} + +show_endpoints() +{ + mptcp_lib_pm_nl_show_endpoints "${ns1}" +} + +change_endpoint() +{ + mptcp_lib_pm_nl_change_endpoint "${ns1}" "${@}" +} + check() { local cmd="$1" @@ -67,125 +137,126 @@ check() fi } -check "ip netns exec $ns1 ./pm_nl_ctl dump" "" "defaults addr list" +check "show_endpoints" "" "defaults addr list" -default_limits="$(ip netns exec $ns1 ./pm_nl_ctl limits)" +default_limits="$(get_limits)" if mptcp_lib_expect_all_features; then - check "ip netns exec $ns1 ./pm_nl_ctl limits" "accept 0 -subflows 2" "defaults limits" + check "get_limits" "$(format_limits 0 2)" "defaults limits" fi -ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.1 -ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.2 flags subflow dev lo -ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.3 flags signal,backup -check "ip netns exec $ns1 ./pm_nl_ctl get 1" "id 1 flags 10.0.1.1" "simple add/get addr" +add_endpoint 10.0.1.1 +add_endpoint 10.0.1.2 flags subflow dev lo +add_endpoint 10.0.1.3 flags signal,backup +check "get_endpoint 1" "$(format_endpoints "1,10.0.1.1")" "simple add/get addr" -check "ip netns exec $ns1 ./pm_nl_ctl dump" \ -"id 1 flags 10.0.1.1 -id 2 flags subflow dev lo 10.0.1.2 -id 3 flags signal,backup 10.0.1.3" "dump addrs" +check "show_endpoints" \ + "$(format_endpoints "1,10.0.1.1" \ + "2,10.0.1.2,subflow,lo" \ + "3,10.0.1.3,signal backup")" "dump addrs" -ip netns exec $ns1 ./pm_nl_ctl del 2 -check "ip netns exec $ns1 ./pm_nl_ctl get 2" "" "simple del addr" -check "ip netns exec $ns1 ./pm_nl_ctl dump" \ -"id 1 flags 10.0.1.1 -id 3 flags signal,backup 10.0.1.3" "dump addrs after del" +del_endpoint 2 +check "get_endpoint 2" "" "simple del addr" +check "show_endpoints" \ + "$(format_endpoints "1,10.0.1.1" \ + "3,10.0.1.3,signal backup")" "dump addrs after del" -ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.3 2>/dev/null -check "ip netns exec $ns1 ./pm_nl_ctl get 4" "" "duplicate addr" +add_endpoint 10.0.1.3 2>/dev/null +check "get_endpoint 4" "" "duplicate addr" -ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.4 flags signal -check "ip netns exec $ns1 ./pm_nl_ctl get 4" "id 4 flags signal 10.0.1.4" "id addr increment" +add_endpoint 10.0.1.4 flags signal +check "get_endpoint 4" "$(format_endpoints "4,10.0.1.4,signal")" "id addr increment" for i in $(seq 5 9); do - ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.$i flags signal >/dev/null 2>&1 + add_endpoint "10.0.1.${i}" flags signal >/dev/null 2>&1 done -check "ip netns exec $ns1 ./pm_nl_ctl get 9" "id 9 flags signal 10.0.1.9" "hard addr limit" -check "ip netns exec $ns1 ./pm_nl_ctl get 10" "" "above hard addr limit" +check "get_endpoint 9" "$(format_endpoints "9,10.0.1.9,signal")" "hard addr limit" +check "get_endpoint 10" "" "above hard addr limit" -ip netns exec $ns1 ./pm_nl_ctl del 9 +del_endpoint 9 for i in $(seq 10 255); do - ip netns exec $ns1 ./pm_nl_ctl add 10.0.0.9 id $i - ip netns exec $ns1 ./pm_nl_ctl del $i + add_endpoint 10.0.0.9 id "${i}" + del_endpoint "${i}" done -check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags 10.0.1.1 -id 3 flags signal,backup 10.0.1.3 -id 4 flags signal 10.0.1.4 -id 5 flags signal 10.0.1.5 -id 6 flags signal 10.0.1.6 -id 7 flags signal 10.0.1.7 -id 8 flags signal 10.0.1.8" "id limit" - -ip netns exec $ns1 ./pm_nl_ctl flush -check "ip netns exec $ns1 ./pm_nl_ctl dump" "" "flush addrs" - -ip netns exec $ns1 ./pm_nl_ctl limits 9 1 2>/dev/null -check "ip netns exec $ns1 ./pm_nl_ctl limits" "$default_limits" "rcv addrs above hard limit" - -ip netns exec $ns1 ./pm_nl_ctl limits 1 9 2>/dev/null -check "ip netns exec $ns1 ./pm_nl_ctl limits" "$default_limits" "subflows above hard limit" - -ip netns exec $ns1 ./pm_nl_ctl limits 8 8 -check "ip netns exec $ns1 ./pm_nl_ctl limits" "accept 8 -subflows 8" "set limits" - -ip netns exec $ns1 ./pm_nl_ctl flush -ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.1 -ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.2 -ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.3 id 100 -ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.4 -ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.5 id 254 -ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.6 -ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.7 -ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.8 -check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags 10.0.1.1 -id 2 flags 10.0.1.2 -id 3 flags 10.0.1.7 -id 4 flags 10.0.1.8 -id 100 flags 10.0.1.3 -id 101 flags 10.0.1.4 -id 254 flags 10.0.1.5 -id 255 flags 10.0.1.6" "set ids" - -ip netns exec $ns1 ./pm_nl_ctl flush -ip netns exec $ns1 ./pm_nl_ctl add 10.0.0.1 -ip netns exec $ns1 ./pm_nl_ctl add 10.0.0.2 id 254 -ip netns exec $ns1 ./pm_nl_ctl add 10.0.0.3 -ip netns exec $ns1 ./pm_nl_ctl add 10.0.0.4 -ip netns exec $ns1 ./pm_nl_ctl add 10.0.0.5 id 253 -ip netns exec $ns1 ./pm_nl_ctl add 10.0.0.6 -ip netns exec $ns1 ./pm_nl_ctl add 10.0.0.7 -ip netns exec $ns1 ./pm_nl_ctl add 10.0.0.8 -check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags 10.0.0.1 -id 2 flags 10.0.0.4 -id 3 flags 10.0.0.6 -id 4 flags 10.0.0.7 -id 5 flags 10.0.0.8 -id 253 flags 10.0.0.5 -id 254 flags 10.0.0.2 -id 255 flags 10.0.0.3" "wrap-around ids" - -ip netns exec $ns1 ./pm_nl_ctl flush -ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.1 flags subflow -ip netns exec $ns1 ./pm_nl_ctl set 10.0.1.1 flags backup -check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \ -subflow,backup 10.0.1.1" "set flags (backup)" -ip netns exec $ns1 ./pm_nl_ctl set 10.0.1.1 flags nobackup -check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \ -subflow 10.0.1.1" " (nobackup)" +check "show_endpoints" \ + "$(format_endpoints "1,10.0.1.1" \ + "3,10.0.1.3,signal backup" \ + "4,10.0.1.4,signal" \ + "5,10.0.1.5,signal" \ + "6,10.0.1.6,signal" \ + "7,10.0.1.7,signal" \ + "8,10.0.1.8,signal")" "id limit" + +flush_endpoint +check "show_endpoints" "" "flush addrs" + +set_limits 9 1 2>/dev/null +check "get_limits" "${default_limits}" "rcv addrs above hard limit" + +set_limits 1 9 2>/dev/null +check "get_limits" "${default_limits}" "subflows above hard limit" + +set_limits 8 8 +check "get_limits" "$(format_limits 8 8)" "set limits" + +flush_endpoint +add_endpoint 10.0.1.1 +add_endpoint 10.0.1.2 +add_endpoint 10.0.1.3 id 100 +add_endpoint 10.0.1.4 +add_endpoint 10.0.1.5 id 254 +add_endpoint 10.0.1.6 +add_endpoint 10.0.1.7 +add_endpoint 10.0.1.8 +check "show_endpoints" \ + "$(format_endpoints "1,10.0.1.1" \ + "2,10.0.1.2" \ + "3,10.0.1.7" \ + "4,10.0.1.8" \ + "100,10.0.1.3" \ + "101,10.0.1.4" \ + "254,10.0.1.5" \ + "255,10.0.1.6")" "set ids" + +flush_endpoint +add_endpoint 10.0.0.1 +add_endpoint 10.0.0.2 id 254 +add_endpoint 10.0.0.3 +add_endpoint 10.0.0.4 +add_endpoint 10.0.0.5 id 253 +add_endpoint 10.0.0.6 +add_endpoint 10.0.0.7 +add_endpoint 10.0.0.8 +check "show_endpoints" \ + "$(format_endpoints "1,10.0.0.1" \ + "2,10.0.0.4" \ + "3,10.0.0.6" \ + "4,10.0.0.7" \ + "5,10.0.0.8" \ + "253,10.0.0.5" \ + "254,10.0.0.2" \ + "255,10.0.0.3")" "wrap-around ids" + +flush_endpoint +add_endpoint 10.0.1.1 flags subflow +change_address 10.0.1.1 backup +check "show_endpoints" "$(format_endpoints "1,10.0.1.1,subflow backup")" \ + "set flags (backup)" +change_address 10.0.1.1 nobackup +check "show_endpoints" "$(format_endpoints "1,10.0.1.1,subflow")" \ + " (nobackup)" # fullmesh support has been added later -ip netns exec $ns1 ./pm_nl_ctl set id 1 flags fullmesh 2>/dev/null -if ip netns exec $ns1 ./pm_nl_ctl dump | grep -q "fullmesh" || +change_endpoint 1 fullmesh 2>/dev/null +if show_endpoints | grep -q "fullmesh" || mptcp_lib_expect_all_features; then - check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \ -subflow,fullmesh 10.0.1.1" " (fullmesh)" - ip netns exec $ns1 ./pm_nl_ctl set id 1 flags nofullmesh - check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \ -subflow 10.0.1.1" " (nofullmesh)" - ip netns exec $ns1 ./pm_nl_ctl set id 1 flags backup,fullmesh - check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \ -subflow,backup,fullmesh 10.0.1.1" " (backup,fullmesh)" + check "show_endpoints" "$(format_endpoints "1,10.0.1.1,subflow fullmesh")" \ + " (fullmesh)" + change_endpoint 1 nofullmesh + check "show_endpoints" "$(format_endpoints "1,10.0.1.1,subflow")" \ + " (nofullmesh)" + change_endpoint 1 backup,fullmesh + check "show_endpoints" "$(format_endpoints "1,10.0.1.1,subflow backup fullmesh")" \ + " (backup,fullmesh)" else for st in fullmesh nofullmesh backup,fullmesh; do st=" (${st})" diff --git a/tools/testing/selftests/net/mptcp/pm_nl_ctl.c b/tools/testing/selftests/net/mptcp/pm_nl_ctl.c index 7426a2cbd4..7ad5a59adf 100644 --- a/tools/testing/selftests/net/mptcp/pm_nl_ctl.c +++ b/tools/testing/selftests/net/mptcp/pm_nl_ctl.c @@ -1276,7 +1276,7 @@ int add_listener(int argc, char *argv[]) struct sockaddr_storage addr; struct sockaddr_in6 *a6; struct sockaddr_in *a4; - u_int16_t family; + u_int16_t family = AF_UNSPEC; int enable = 1; int sock; int err; diff --git a/tools/testing/selftests/net/mptcp/simult_flows.sh b/tools/testing/selftests/net/mptcp/simult_flows.sh index 7322e1e4e5..f74e1c3c12 100755 --- a/tools/testing/selftests/net/mptcp/simult_flows.sh +++ b/tools/testing/selftests/net/mptcp/simult_flows.sh @@ -27,10 +27,11 @@ capout="" size=0 usage() { - echo "Usage: $0 [ -b ] [ -c ] [ -d ]" + echo "Usage: $0 [ -b ] [ -c ] [ -d ] [ -i]" echo -e "\t-b: bail out after first error, otherwise runs al testcases" echo -e "\t-c: capture packets for each test using tcpdump (default: no capture)" echo -e "\t-d: debug this script" + echo -e "\t-i: use 'ip mptcp' instead of 'pm_nl_ctl'" } # This function is used in the cleanup trap @@ -45,7 +46,7 @@ cleanup() } mptcp_lib_check_mptcp -mptcp_lib_check_tools ip +mptcp_lib_check_tools ip tc # "$ns1" ns2 ns3 # ns1eth1 ns2eth1 ns2eth3 ns3eth1 @@ -85,8 +86,8 @@ setup() ip -net "$ns1" route add default via 10.0.2.2 metric 101 ip -net "$ns1" route add default via dead:beef:2::2 metric 101 - ip netns exec "$ns1" ./pm_nl_ctl limits 1 1 - ip netns exec "$ns1" ./pm_nl_ctl add 10.0.2.1 dev ns1eth2 flags subflow + mptcp_lib_pm_nl_set_limits "${ns1}" 1 1 + mptcp_lib_pm_nl_add_endpoint "${ns1}" 10.0.2.1 dev ns1eth2 flags subflow ip -net "$ns2" addr add 10.0.1.2/24 dev ns2eth1 ip -net "$ns2" addr add dead:beef:1::2/64 dev ns2eth1 nodad @@ -108,7 +109,7 @@ setup() ip -net "$ns3" route add default via 10.0.3.2 ip -net "$ns3" route add default via dead:beef:3::2 - ip netns exec "$ns3" ./pm_nl_ctl limits 1 1 + mptcp_lib_pm_nl_set_limits "${ns3}" 1 1 # debug build can slow down measurably the test program # we use quite tight time limit on the run-time, to ensure @@ -259,7 +260,7 @@ run_test() fi } -while getopts "bcdh" option;do +while getopts "bcdhi" option;do case "$option" in "h") usage $0 @@ -274,6 +275,9 @@ while getopts "bcdh" option;do "d") set -x ;; + "i") + mptcp_lib_set_ip_mptcp + ;; "?") usage $0 exit ${KSFT_FAIL} diff --git a/tools/testing/selftests/net/msg_zerocopy.c b/tools/testing/selftests/net/msg_zerocopy.c index bdc03a2097..7ea5fb28c9 100644 --- a/tools/testing/selftests/net/msg_zerocopy.c +++ b/tools/testing/selftests/net/msg_zerocopy.c @@ -85,6 +85,7 @@ static bool cfg_rx; static int cfg_runtime_ms = 4200; static int cfg_verbose; static int cfg_waittime_ms = 500; +static int cfg_notification_limit = 32; static bool cfg_zerocopy; static socklen_t cfg_alen; @@ -95,6 +96,7 @@ static char payload[IP_MAXPACKET]; static long packets, bytes, completions, expected_completions; static int zerocopied = -1; static uint32_t next_completion; +static uint32_t sends_since_notify; static unsigned long gettimeofday_ms(void) { @@ -208,6 +210,7 @@ static bool do_sendmsg(int fd, struct msghdr *msg, bool do_zerocopy, int domain) error(1, errno, "send"); if (cfg_verbose && ret != len) fprintf(stderr, "send: ret=%u != %u\n", ret, len); + sends_since_notify++; if (len) { packets++; @@ -435,7 +438,7 @@ static bool do_recv_completion(int fd, int domain) /* Detect notification gaps. These should not happen often, if at all. * Gaps can occur due to drops, reordering and retransmissions. */ - if (lo != next_completion) + if (cfg_verbose && lo != next_completion) fprintf(stderr, "gap: %u..%u does not append to %u\n", lo, hi, next_completion); next_completion = hi + 1; @@ -460,6 +463,7 @@ static bool do_recv_completion(int fd, int domain) static void do_recv_completions(int fd, int domain) { while (do_recv_completion(fd, domain)) {} + sends_since_notify = 0; } /* Wait for all remaining completions on the errqueue */ @@ -549,6 +553,9 @@ static void do_tx(int domain, int type, int protocol) else do_sendmsg(fd, &msg, cfg_zerocopy, domain); + if (cfg_zerocopy && sends_since_notify >= cfg_notification_limit) + do_recv_completions(fd, domain); + while (!do_poll(fd, POLLOUT)) { if (cfg_zerocopy) do_recv_completions(fd, domain); @@ -708,7 +715,7 @@ static void parse_opts(int argc, char **argv) cfg_payload_len = max_payload_len; - while ((c = getopt(argc, argv, "46c:C:D:i:mp:rs:S:t:vz")) != -1) { + while ((c = getopt(argc, argv, "46c:C:D:i:l:mp:rs:S:t:vz")) != -1) { switch (c) { case '4': if (cfg_family != PF_UNSPEC) @@ -736,6 +743,9 @@ static void parse_opts(int argc, char **argv) if (cfg_ifindex == 0) error(1, errno, "invalid iface: %s", optarg); break; + case 'l': + cfg_notification_limit = strtoul(optarg, NULL, 0); + break; case 'm': cfg_cork_mixed = true; break; diff --git a/tools/testing/selftests/net/nat6to4.c b/tools/testing/selftests/net/nat6to4.bpf.c index ac54c36b25..ac54c36b25 100644 --- a/tools/testing/selftests/net/nat6to4.c +++ b/tools/testing/selftests/net/nat6to4.bpf.c diff --git a/tools/testing/selftests/net/netfilter/.gitignore b/tools/testing/selftests/net/netfilter/.gitignore new file mode 100644 index 0000000000..0a64d6d0e2 --- /dev/null +++ b/tools/testing/selftests/net/netfilter/.gitignore @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0-only +audit_logread +connect_close +conntrack_dump_flush +sctp_collision +nf_queue diff --git a/tools/testing/selftests/net/netfilter/Makefile b/tools/testing/selftests/net/netfilter/Makefile new file mode 100644 index 0000000000..47945b2b3f --- /dev/null +++ b/tools/testing/selftests/net/netfilter/Makefile @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 + +top_srcdir = ../../../../.. + +HOSTPKG_CONFIG := pkg-config +MNL_CFLAGS := $(shell $(HOSTPKG_CONFIG) --cflags libmnl 2>/dev/null) +MNL_LDLIBS := $(shell $(HOSTPKG_CONFIG) --libs libmnl 2>/dev/null || echo -lmnl) + +TEST_PROGS := br_netfilter.sh bridge_brouter.sh +TEST_PROGS += conntrack_icmp_related.sh +TEST_PROGS += conntrack_ipip_mtu.sh +TEST_PROGS += conntrack_tcp_unreplied.sh +TEST_PROGS += conntrack_sctp_collision.sh +TEST_PROGS += conntrack_vrf.sh +TEST_PROGS += ipvs.sh +TEST_PROGS += nf_conntrack_packetdrill.sh +TEST_PROGS += nf_nat_edemux.sh +TEST_PROGS += nft_audit.sh +TEST_PROGS += nft_concat_range.sh +TEST_PROGS += nft_conntrack_helper.sh +TEST_PROGS += nft_fib.sh +TEST_PROGS += nft_flowtable.sh +TEST_PROGS += nft_meta.sh +TEST_PROGS += nft_nat.sh +TEST_PROGS += nft_nat_zones.sh +TEST_PROGS += nft_queue.sh +TEST_PROGS += nft_synproxy.sh +TEST_PROGS += nft_zones_many.sh +TEST_PROGS += rpath.sh +TEST_PROGS += xt_string.sh + +TEST_PROGS_EXTENDED = nft_concat_range_perf.sh + +TEST_GEN_PROGS = conntrack_dump_flush + +TEST_GEN_FILES = audit_logread +TEST_GEN_FILES += connect_close nf_queue +TEST_GEN_FILES += sctp_collision + +include ../../lib.mk + +$(OUTPUT)/nf_queue: CFLAGS += $(MNL_CFLAGS) +$(OUTPUT)/nf_queue: LDLIBS += $(MNL_LDLIBS) + +$(OUTPUT)/conntrack_dump_flush: CFLAGS += $(MNL_CFLAGS) +$(OUTPUT)/conntrack_dump_flush: LDLIBS += $(MNL_LDLIBS) + +TEST_FILES := lib.sh +TEST_FILES += packetdrill + +TEST_INCLUDES := \ + ../lib.sh diff --git a/tools/testing/selftests/net/netfilter/audit_logread.c b/tools/testing/selftests/net/netfilter/audit_logread.c new file mode 100644 index 0000000000..a0a880fc2d --- /dev/null +++ b/tools/testing/selftests/net/netfilter/audit_logread.c @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: GPL-2.0 + +#define _GNU_SOURCE +#include <errno.h> +#include <fcntl.h> +#include <poll.h> +#include <signal.h> +#include <stdint.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <sys/socket.h> +#include <unistd.h> +#include <linux/audit.h> +#include <linux/netlink.h> + +static int fd; + +#define MAX_AUDIT_MESSAGE_LENGTH 8970 +struct audit_message { + struct nlmsghdr nlh; + union { + struct audit_status s; + char data[MAX_AUDIT_MESSAGE_LENGTH]; + } u; +}; + +int audit_recv(int fd, struct audit_message *rep) +{ + struct sockaddr_nl addr; + socklen_t addrlen = sizeof(addr); + int ret; + + do { + ret = recvfrom(fd, rep, sizeof(*rep), 0, + (struct sockaddr *)&addr, &addrlen); + } while (ret < 0 && errno == EINTR); + + if (ret < 0 || + addrlen != sizeof(addr) || + addr.nl_pid != 0 || + rep->nlh.nlmsg_type == NLMSG_ERROR) /* short-cut for now */ + return -1; + + return ret; +} + +int audit_send(int fd, uint16_t type, uint32_t key, uint32_t val) +{ + static int seq = 0; + struct audit_message msg = { + .nlh = { + .nlmsg_len = NLMSG_SPACE(sizeof(msg.u.s)), + .nlmsg_type = type, + .nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK, + .nlmsg_seq = ++seq, + }, + .u.s = { + .mask = key, + .enabled = key == AUDIT_STATUS_ENABLED ? val : 0, + .pid = key == AUDIT_STATUS_PID ? val : 0, + } + }; + struct sockaddr_nl addr = { + .nl_family = AF_NETLINK, + }; + int ret; + + do { + ret = sendto(fd, &msg, msg.nlh.nlmsg_len, 0, + (struct sockaddr *)&addr, sizeof(addr)); + } while (ret < 0 && errno == EINTR); + + if (ret != (int)msg.nlh.nlmsg_len) + return -1; + return 0; +} + +int audit_set(int fd, uint32_t key, uint32_t val) +{ + struct audit_message rep = { 0 }; + int ret; + + ret = audit_send(fd, AUDIT_SET, key, val); + if (ret) + return ret; + + ret = audit_recv(fd, &rep); + if (ret < 0) + return ret; + return 0; +} + +int readlog(int fd) +{ + struct audit_message rep = { 0 }; + int ret = audit_recv(fd, &rep); + const char *sep = ""; + char *k, *v; + + if (ret < 0) + return ret; + + if (rep.nlh.nlmsg_type != AUDIT_NETFILTER_CFG) + return 0; + + /* skip the initial "audit(...): " part */ + strtok(rep.u.data, " "); + + while ((k = strtok(NULL, "="))) { + v = strtok(NULL, " "); + + /* these vary and/or are uninteresting, ignore */ + if (!strcmp(k, "pid") || + !strcmp(k, "comm") || + !strcmp(k, "subj")) + continue; + + /* strip the varying sequence number */ + if (!strcmp(k, "table")) + *strchrnul(v, ':') = '\0'; + + printf("%s%s=%s", sep, k, v); + sep = " "; + } + if (*sep) { + printf("\n"); + fflush(stdout); + } + return 0; +} + +void cleanup(int sig) +{ + audit_set(fd, AUDIT_STATUS_ENABLED, 0); + close(fd); + if (sig) + exit(0); +} + +int main(int argc, char **argv) +{ + struct sigaction act = { + .sa_handler = cleanup, + }; + + fd = socket(PF_NETLINK, SOCK_RAW, NETLINK_AUDIT); + if (fd < 0) { + perror("Can't open netlink socket"); + return -1; + } + + if (sigaction(SIGTERM, &act, NULL) < 0 || + sigaction(SIGINT, &act, NULL) < 0) { + perror("Can't set signal handler"); + close(fd); + return -1; + } + + audit_set(fd, AUDIT_STATUS_ENABLED, 1); + audit_set(fd, AUDIT_STATUS_PID, getpid()); + + while (1) + readlog(fd); +} diff --git a/tools/testing/selftests/net/netfilter/br_netfilter.sh b/tools/testing/selftests/net/netfilter/br_netfilter.sh new file mode 100755 index 0000000000..c28379a965 --- /dev/null +++ b/tools/testing/selftests/net/netfilter/br_netfilter.sh @@ -0,0 +1,171 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test for legacy br_netfilter module combined with connection tracking, +# a combination that doesn't really work. +# Multicast/broadcast packets race for hash table insertion. + +# eth0 br0 eth0 +# setup is: ns1 <->,ns0 <-> ns3 +# ns2 <-' `'-> ns4 + +source lib.sh + +checktool "nft --version" "run test without nft tool" + +cleanup() { + cleanup_all_ns +} + +trap cleanup EXIT + +setup_ns ns0 ns1 ns2 ns3 ns4 + +ret=0 + +do_ping() +{ + fromns="$1" + dstip="$2" + + if ! ip netns exec "$fromns" ping -c 1 -q "$dstip" > /dev/null; then + echo "ERROR: ping from $fromns to $dstip" + ip netns exec "$ns0" nft list ruleset + ret=1 + fi +} + +bcast_ping() +{ + fromns="$1" + dstip="$2" + + local packets=500 + + [ "$KSFT_MACHINE_SLOW" = yes ] && packets=100 + + for i in $(seq 1 $packets); do + if ! ip netns exec "$fromns" ping -q -f -b -c 1 -q "$dstip" > /dev/null 2>&1; then + echo "ERROR: ping -b from $fromns to $dstip" + ip netns exec "$ns0" nft list ruleset + ret=1 + break + fi + done +} + +ip netns exec "$ns0" sysctl -q net.ipv4.conf.all.rp_filter=0 +ip netns exec "$ns0" sysctl -q net.ipv4.conf.default.rp_filter=0 + +if ! ip link add veth1 netns "$ns0" type veth peer name eth0 netns "$ns1"; then + echo "SKIP: Can't create veth device" + exit $ksft_skip +fi + +ip link add veth2 netns "$ns0" type veth peer name eth0 netns "$ns2" +ip link add veth3 netns "$ns0" type veth peer name eth0 netns "$ns3" +ip link add veth4 netns "$ns0" type veth peer name eth0 netns "$ns4" + +for i in $(seq 1 4); do + ip -net "$ns0" link set "veth$i" up +done + +if ! ip -net "$ns0" link add br0 type bridge stp_state 0 forward_delay 0 nf_call_iptables 1 nf_call_ip6tables 1 nf_call_arptables 1; then + echo "SKIP: Can't create bridge br0" + exit $ksft_skip +fi + +# make veth0,1,2 part of bridge. +for i in $(seq 1 3); do + ip -net "$ns0" link set "veth$i" master br0 +done + +# add a macvlan on top of the bridge. +MACVLAN_ADDR=ba:f3:13:37:42:23 +ip -net "$ns0" link add link br0 name macvlan0 type macvlan mode private +ip -net "$ns0" link set macvlan0 address ${MACVLAN_ADDR} +ip -net "$ns0" link set macvlan0 up +ip -net "$ns0" addr add 10.23.0.1/24 dev macvlan0 + +# add a macvlan on top of veth4. +MACVLAN_ADDR=ba:f3:13:37:42:24 +ip -net "$ns0" link add link veth4 name macvlan4 type macvlan mode passthru +ip -net "$ns0" link set macvlan4 address ${MACVLAN_ADDR} +ip -net "$ns0" link set macvlan4 up + +# make the macvlan part of the bridge. +# veth4 is not a bridge port, only the macvlan on top of it. +ip -net "$ns0" link set macvlan4 master br0 + +ip -net "$ns0" link set br0 up +ip -net "$ns0" addr add 10.0.0.1/24 dev br0 + +modprobe -q br_netfilter +if ! ip netns exec "$ns0" sysctl -q net.bridge.bridge-nf-call-iptables=1; then + echo "SKIP: bridge netfilter not available" + ret=$ksft_skip +fi + +# for testing, so namespaces will reply to ping -b probes. +ip netns exec "$ns0" sysctl -q net.ipv4.icmp_echo_ignore_broadcasts=0 + +# enable conntrack in ns0 and drop broadcast packets in forward to +# avoid them from getting confirmed in the postrouting hook before +# the cloned skb is passed up the stack. +ip netns exec "$ns0" nft -f - <<EOF +table ip filter { + chain input { + type filter hook input priority 1; policy accept + iifname br0 counter + ct state new accept + } +} + +table bridge filter { + chain forward { + type filter hook forward priority 0; policy accept + meta pkttype broadcast ip protocol icmp counter drop + } +} +EOF +if [ "$?" -ne 0 ];then + echo "SKIP: could not add nftables ruleset" + exit $ksft_skip +fi + +# place 1, 2 & 3 in same subnet, connected via ns0:br0. +# ns4 is placed in same subnet as well, but its not +# part of the bridge: the corresponding veth4 is not +# part of the bridge, only its macvlan interface. +for i in $(seq 1 4); do + eval ip -net \$ns"$i" link set eth0 up +done +for i in $(seq 1 2); do + eval ip -net \$ns"$i" addr add "10.0.0.1$i/24" dev eth0 +done + +ip -net "$ns3" addr add 10.23.0.13/24 dev eth0 +ip -net "$ns4" addr add 10.23.0.14/24 dev eth0 + +# test basic connectivity +do_ping "$ns1" 10.0.0.12 +do_ping "$ns3" 10.23.0.1 +do_ping "$ns4" 10.23.0.1 + +bcast_ping "$ns1" 10.0.0.255 + +# This should deliver broadcast to macvlan0, which is on top of ns0:br0. +bcast_ping "$ns3" 10.23.0.255 + +# same, this time via veth4:macvlan4. +bcast_ping "$ns4" 10.23.0.255 + +read t < /proc/sys/kernel/tainted +if [ "$t" -eq 0 ];then + echo PASS: kernel not tainted +else + echo ERROR: kernel is tainted + ret=1 +fi + +exit $ret diff --git a/tools/testing/selftests/net/netfilter/bridge_brouter.sh b/tools/testing/selftests/net/netfilter/bridge_brouter.sh new file mode 100755 index 0000000000..2549b65906 --- /dev/null +++ b/tools/testing/selftests/net/netfilter/bridge_brouter.sh @@ -0,0 +1,122 @@ +#!/bin/bash +# +# This test is for bridge 'brouting', i.e. make some packets being routed +# rather than getting bridged even though they arrive on interface that is +# part of a bridge. + +# eth0 br0 eth0 +# setup is: ns1 <-> nsbr <-> ns2 + +source lib.sh + +if ! ebtables -V > /dev/null 2>&1;then + echo "SKIP: Could not run test without ebtables" + exit $ksft_skip +fi + +cleanup() { + cleanup_all_ns +} + +trap cleanup EXIT + +setup_ns nsbr ns1 ns2 + +ip netns exec "$nsbr" sysctl -q net.ipv4.conf.default.rp_filter=0 +ip netns exec "$nsbr" sysctl -q net.ipv4.conf.all.rp_filter=0 +if ! ip link add veth0 netns "$nsbr" type veth peer name eth0 netns "$ns1"; then + echo "SKIP: Can't create veth device" + exit $ksft_skip +fi +ip link add veth1 netns "$nsbr" type veth peer name eth0 netns "$ns2" + +if ! ip -net "$nsbr" link add br0 type bridge; then + echo "SKIP: Can't create bridge br0" + exit $ksft_skip +fi + +ip -net "$nsbr" link set veth0 up +ip -net "$nsbr" link set veth1 up + +ip -net "$nsbr" link set veth0 master br0 +ip -net "$nsbr" link set veth1 master br0 +ip -net "$nsbr" link set br0 up +ip -net "$nsbr" addr add 10.0.0.1/24 dev br0 + +# place both in same subnet, ${ns1} and ${ns2} connected via ${nsbr}:br0 +ip -net "$ns1" link set eth0 up +ip -net "$ns2" link set eth0 up +ip -net "$ns1" addr add 10.0.0.11/24 dev eth0 +ip -net "$ns2" addr add 10.0.0.12/24 dev eth0 + +test_ebtables_broute() +{ + # redirect is needed so the dstmac is rewritten to the bridge itself, + # ip stack won't process OTHERHOST (foreign unicast mac) packets. + if ! ip netns exec "$nsbr" ebtables -t broute -A BROUTING -p ipv4 --ip-protocol icmp -j redirect --redirect-target=DROP; then + echo "SKIP: Could not add ebtables broute redirect rule" + return $ksft_skip + fi + + ip netns exec "$nsbr" sysctl -q net.ipv4.conf.veth0.forwarding=0 + + # ping net${ns1}, expected to not work (ip forwarding is off) + if ip netns exec "$ns1" ping -q -c 1 10.0.0.12 -W 0.5 > /dev/null 2>&1; then + echo "ERROR: ping works, should have failed" 1>&2 + return 1 + fi + + # enable forwarding on both interfaces. + # neither needs an ip address, but at least the bridge needs + # an ip address in same network segment as ${ns1} and ${ns2} (${nsbr} + # needs to be able to determine route for to-be-forwarded packet). + ip netns exec "$nsbr" sysctl -q net.ipv4.conf.veth0.forwarding=1 + ip netns exec "$nsbr" sysctl -q net.ipv4.conf.veth1.forwarding=1 + + if ! ip netns exec "$ns1" ping -q -c 1 10.0.0.12 > /dev/null; then + echo "ERROR: ping did not work, but it should (broute+forward)" 1>&2 + return 1 + fi + + echo "PASS: ${ns1}/${ns2} connectivity with active broute rule" + ip netns exec "$nsbr" ebtables -t broute -F + + # ping net${ns1}, expected to work (frames are bridged) + if ! ip netns exec "$ns1" ping -q -c 1 10.0.0.12 > /dev/null; then + echo "ERROR: ping did not work, but it should (bridged)" 1>&2 + return 1 + fi + + ip netns exec "$nsbr" ebtables -t filter -A FORWARD -p ipv4 --ip-protocol icmp -j DROP + + # ping net${ns1}, expected to not work (DROP in bridge forward) + if ip netns exec "$ns1" ping -q -c 1 10.0.0.12 -W 0.5 > /dev/null 2>&1; then + echo "ERROR: ping works, should have failed (icmp forward drop)" 1>&2 + return 1 + fi + + # re-activate brouter + ip netns exec "$nsbr" ebtables -t broute -A BROUTING -p ipv4 --ip-protocol icmp -j redirect --redirect-target=DROP + + if ! ip netns exec "$ns2" ping -q -c 1 10.0.0.11 > /dev/null; then + echo "ERROR: ping did not work, but it should (broute+forward 2)" 1>&2 + return 1 + fi + + echo "PASS: ${ns1}/${ns2} connectivity with active broute rule and bridge forward drop" + return 0 +} + +# test basic connectivity +if ! ip netns exec "$ns1" ping -c 1 -q 10.0.0.12 > /dev/null; then + echo "ERROR: Could not reach ${ns2} from ${ns1}" 1>&2 + exit 1 +fi + +if ! ip netns exec "$ns2" ping -c 1 -q 10.0.0.11 > /dev/null; then + echo "ERROR: Could not reach ${ns1} from ${ns2}" 1>&2 + exit 1 +fi + +test_ebtables_broute +exit $? diff --git a/tools/testing/selftests/net/netfilter/config b/tools/testing/selftests/net/netfilter/config new file mode 100644 index 0000000000..63ef80ef47 --- /dev/null +++ b/tools/testing/selftests/net/netfilter/config @@ -0,0 +1,89 @@ +CONFIG_AUDIT=y +CONFIG_BPF_SYSCALL=y +CONFIG_BRIDGE=m +CONFIG_BRIDGE_EBT_BROUTE=m +CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_REDIRECT=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_NETFILTER=m +CONFIG_BRIDGE_NF_EBTABLES=m +CONFIG_CGROUP_BPF=y +CONFIG_DUMMY=m +CONFIG_INET_ESP=m +CONFIG_IP_NF_MATCH_RPFILTER=m +CONFIG_IP6_NF_MATCH_RPFILTER=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP_NF_RAW=m +CONFIG_IP6_NF_RAW=m +CONFIG_IP_SCTP=m +CONFIG_IP_VS=m +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_RR=m +CONFIG_IPV6=y +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_MACVLAN=m +CONFIG_NAMESPACES=y +CONFIG_NET_CLS_U32=m +CONFIG_NET_L3_MASTER_DEV=y +CONFIG_NET_NS=y +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_IPIP=m +CONFIG_NET_VRF=y +CONFIG_NETFILTER=y +CONFIG_NETFILTER_ADVANCED=y +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_SYNPROXY=m +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_NAT=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_TARGET_REDIRECT=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_ZONES=y +CONFIG_NF_CT_NETLINK=m +CONFIG_NF_CT_PROTO_SCTP=y +CONFIG_NF_FLOW_TABLE=m +CONFIG_NF_LOG_IPV4=m +CONFIG_NF_LOG_IPV6=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_REDIRECT=y +CONFIG_NF_NAT_MASQUERADE=y +CONFIG_NF_TABLES=m +CONFIG_NF_TABLES_BRIDGE=m +CONFIG_NF_TABLES_INET=y +CONFIG_NF_TABLES_IPV4=y +CONFIG_NF_TABLES_IPV6=y +CONFIG_NF_TABLES_NETDEV=y +CONFIG_NF_FLOW_TABLE_INET=m +CONFIG_NFT_BRIDGE_META=m +CONFIG_NFT_COMPAT=m +CONFIG_NFT_CT=m +CONFIG_NFT_FIB=m +CONFIG_NFT_FIB_INET=m +CONFIG_NFT_FIB_IPV4=m +CONFIG_NFT_FIB_IPV6=m +CONFIG_NFT_FLOW_OFFLOAD=m +CONFIG_NFT_LIMIT=m +CONFIG_NFT_LOG=m +CONFIG_NFT_MASQ=m +CONFIG_NFT_NAT=m +CONFIG_NFT_NUMGEN=m +CONFIG_NFT_QUEUE=m +CONFIG_NFT_QUOTA=m +CONFIG_NFT_REDIR=m +CONFIG_NFT_SYNPROXY=m +CONFIG_VETH=m +CONFIG_VLAN_8021Q=m +CONFIG_XFRM_USER=m +CONFIG_XFRM_STATISTICS=y +CONFIG_NET_PKTGEN=m +CONFIG_TUN=m diff --git a/tools/testing/selftests/net/netfilter/connect_close.c b/tools/testing/selftests/net/netfilter/connect_close.c new file mode 100644 index 0000000000..1c3b0add54 --- /dev/null +++ b/tools/testing/selftests/net/netfilter/connect_close.c @@ -0,0 +1,136 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <stdio.h> +#include <stdlib.h> +#include <fcntl.h> +#include <string.h> +#include <unistd.h> +#include <signal.h> + +#include <arpa/inet.h> +#include <sys/socket.h> + +#define PORT 12345 +#define RUNTIME 10 + +static struct { + unsigned int timeout; + unsigned int port; +} opts = { + .timeout = RUNTIME, + .port = PORT, +}; + +static void handler(int sig) +{ + _exit(sig == SIGALRM ? 0 : 1); +} + +static void set_timeout(void) +{ + struct sigaction action = { + .sa_handler = handler, + }; + + sigaction(SIGALRM, &action, NULL); + + alarm(opts.timeout); +} + +static void do_connect(const struct sockaddr_in *dst) +{ + int s = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); + + if (s >= 0) + fcntl(s, F_SETFL, O_NONBLOCK); + + connect(s, (struct sockaddr *)dst, sizeof(*dst)); + close(s); +} + +static void do_accept(const struct sockaddr_in *src) +{ + int c, one = 1, s = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); + + if (s < 0) + return; + + setsockopt(s, SOL_SOCKET, SO_REUSEADDR, &one, sizeof(one)); + setsockopt(s, SOL_SOCKET, SO_REUSEPORT, &one, sizeof(one)); + + bind(s, (struct sockaddr *)src, sizeof(*src)); + + listen(s, 16); + + c = accept(s, NULL, NULL); + if (c >= 0) + close(c); + + close(s); +} + +static int accept_loop(void) +{ + struct sockaddr_in src = { + .sin_family = AF_INET, + .sin_port = htons(opts.port), + }; + + inet_pton(AF_INET, "127.0.0.1", &src.sin_addr); + + set_timeout(); + + for (;;) + do_accept(&src); + + return 1; +} + +static int connect_loop(void) +{ + struct sockaddr_in dst = { + .sin_family = AF_INET, + .sin_port = htons(opts.port), + }; + + inet_pton(AF_INET, "127.0.0.1", &dst.sin_addr); + + set_timeout(); + + for (;;) + do_connect(&dst); + + return 1; +} + +static void parse_opts(int argc, char **argv) +{ + int c; + + while ((c = getopt(argc, argv, "t:p:")) != -1) { + switch (c) { + case 't': + opts.timeout = atoi(optarg); + break; + case 'p': + opts.port = atoi(optarg); + break; + } + } +} + +int main(int argc, char *argv[]) +{ + pid_t p; + + parse_opts(argc, argv); + + p = fork(); + if (p < 0) + return 111; + + if (p > 0) + return accept_loop(); + + return connect_loop(); +} diff --git a/tools/testing/selftests/net/netfilter/conntrack_dump_flush.c b/tools/testing/selftests/net/netfilter/conntrack_dump_flush.c new file mode 100644 index 0000000000..bd9317bf5a --- /dev/null +++ b/tools/testing/selftests/net/netfilter/conntrack_dump_flush.c @@ -0,0 +1,469 @@ +// SPDX-License-Identifier: GPL-2.0 + +#define _GNU_SOURCE + +#include <time.h> +#include <libmnl/libmnl.h> +#include <netinet/ip.h> + +#include <linux/netlink.h> +#include <linux/netfilter/nfnetlink.h> +#include <linux/netfilter/nfnetlink_conntrack.h> +#include <linux/netfilter/nf_conntrack_tcp.h> +#include "../../kselftest_harness.h" + +#define TEST_ZONE_ID 123 +#define NF_CT_DEFAULT_ZONE_ID 0 + +static int reply_counter; + +static int build_cta_tuple_v4(struct nlmsghdr *nlh, int type, + uint32_t src_ip, uint32_t dst_ip, + uint16_t src_port, uint16_t dst_port) +{ + struct nlattr *nest, *nest_ip, *nest_proto; + + nest = mnl_attr_nest_start(nlh, type); + if (!nest) + return -1; + + nest_ip = mnl_attr_nest_start(nlh, CTA_TUPLE_IP); + if (!nest_ip) + return -1; + mnl_attr_put_u32(nlh, CTA_IP_V4_SRC, src_ip); + mnl_attr_put_u32(nlh, CTA_IP_V4_DST, dst_ip); + mnl_attr_nest_end(nlh, nest_ip); + + nest_proto = mnl_attr_nest_start(nlh, CTA_TUPLE_PROTO); + if (!nest_proto) + return -1; + mnl_attr_put_u8(nlh, CTA_PROTO_NUM, 6); + mnl_attr_put_u16(nlh, CTA_PROTO_SRC_PORT, htons(src_port)); + mnl_attr_put_u16(nlh, CTA_PROTO_DST_PORT, htons(dst_port)); + mnl_attr_nest_end(nlh, nest_proto); + + mnl_attr_nest_end(nlh, nest); +} + +static int build_cta_tuple_v6(struct nlmsghdr *nlh, int type, + struct in6_addr src_ip, struct in6_addr dst_ip, + uint16_t src_port, uint16_t dst_port) +{ + struct nlattr *nest, *nest_ip, *nest_proto; + + nest = mnl_attr_nest_start(nlh, type); + if (!nest) + return -1; + + nest_ip = mnl_attr_nest_start(nlh, CTA_TUPLE_IP); + if (!nest_ip) + return -1; + mnl_attr_put(nlh, CTA_IP_V6_SRC, sizeof(struct in6_addr), &src_ip); + mnl_attr_put(nlh, CTA_IP_V6_DST, sizeof(struct in6_addr), &dst_ip); + mnl_attr_nest_end(nlh, nest_ip); + + nest_proto = mnl_attr_nest_start(nlh, CTA_TUPLE_PROTO); + if (!nest_proto) + return -1; + mnl_attr_put_u8(nlh, CTA_PROTO_NUM, 6); + mnl_attr_put_u16(nlh, CTA_PROTO_SRC_PORT, htons(src_port)); + mnl_attr_put_u16(nlh, CTA_PROTO_DST_PORT, htons(dst_port)); + mnl_attr_nest_end(nlh, nest_proto); + + mnl_attr_nest_end(nlh, nest); +} + +static int build_cta_proto(struct nlmsghdr *nlh) +{ + struct nlattr *nest, *nest_proto; + + nest = mnl_attr_nest_start(nlh, CTA_PROTOINFO); + if (!nest) + return -1; + + nest_proto = mnl_attr_nest_start(nlh, CTA_PROTOINFO_TCP); + if (!nest_proto) + return -1; + mnl_attr_put_u8(nlh, CTA_PROTOINFO_TCP_STATE, TCP_CONNTRACK_ESTABLISHED); + mnl_attr_put_u16(nlh, CTA_PROTOINFO_TCP_FLAGS_ORIGINAL, 0x0a0a); + mnl_attr_put_u16(nlh, CTA_PROTOINFO_TCP_FLAGS_REPLY, 0x0a0a); + mnl_attr_nest_end(nlh, nest_proto); + + mnl_attr_nest_end(nlh, nest); +} + +static int conntrack_data_insert(struct mnl_socket *sock, struct nlmsghdr *nlh, + uint16_t zone) +{ + char buf[MNL_SOCKET_BUFFER_SIZE]; + struct nlmsghdr *rplnlh; + unsigned int portid; + int err, ret; + + portid = mnl_socket_get_portid(sock); + + ret = build_cta_proto(nlh); + if (ret < 0) { + perror("build_cta_proto"); + return -1; + } + mnl_attr_put_u32(nlh, CTA_TIMEOUT, htonl(20000)); + mnl_attr_put_u16(nlh, CTA_ZONE, htons(zone)); + + if (mnl_socket_sendto(sock, nlh, nlh->nlmsg_len) < 0) { + perror("mnl_socket_sendto"); + return -1; + } + + ret = mnl_socket_recvfrom(sock, buf, MNL_SOCKET_BUFFER_SIZE); + if (ret < 0) { + perror("mnl_socket_recvfrom"); + return ret; + } + + ret = mnl_cb_run(buf, ret, nlh->nlmsg_seq, portid, NULL, NULL); + if (ret < 0) { + if (errno == EEXIST) { + /* The entries are probably still there from a previous + * run. So we are good + */ + return 0; + } + perror("mnl_cb_run"); + return ret; + } + + return 0; +} + +static int conntrack_data_generate_v4(struct mnl_socket *sock, uint32_t src_ip, + uint32_t dst_ip, uint16_t zone) +{ + char buf[MNL_SOCKET_BUFFER_SIZE]; + struct nlmsghdr *nlh; + struct nfgenmsg *nfh; + int ret; + + nlh = mnl_nlmsg_put_header(buf); + nlh->nlmsg_type = (NFNL_SUBSYS_CTNETLINK << 8) | IPCTNL_MSG_CT_NEW; + nlh->nlmsg_flags = NLM_F_REQUEST | NLM_F_CREATE | + NLM_F_ACK | NLM_F_EXCL; + nlh->nlmsg_seq = time(NULL); + + nfh = mnl_nlmsg_put_extra_header(nlh, sizeof(struct nfgenmsg)); + nfh->nfgen_family = AF_INET; + nfh->version = NFNETLINK_V0; + nfh->res_id = 0; + + ret = build_cta_tuple_v4(nlh, CTA_TUPLE_ORIG, src_ip, dst_ip, 12345, 443); + if (ret < 0) { + perror("build_cta_tuple_v4"); + return ret; + } + ret = build_cta_tuple_v4(nlh, CTA_TUPLE_REPLY, dst_ip, src_ip, 443, 12345); + if (ret < 0) { + perror("build_cta_tuple_v4"); + return ret; + } + return conntrack_data_insert(sock, nlh, zone); +} + +static int conntrack_data_generate_v6(struct mnl_socket *sock, + struct in6_addr src_ip, + struct in6_addr dst_ip, + uint16_t zone) +{ + char buf[MNL_SOCKET_BUFFER_SIZE]; + struct nlmsghdr *nlh; + struct nfgenmsg *nfh; + int ret; + + nlh = mnl_nlmsg_put_header(buf); + nlh->nlmsg_type = (NFNL_SUBSYS_CTNETLINK << 8) | IPCTNL_MSG_CT_NEW; + nlh->nlmsg_flags = NLM_F_REQUEST | NLM_F_CREATE | + NLM_F_ACK | NLM_F_EXCL; + nlh->nlmsg_seq = time(NULL); + + nfh = mnl_nlmsg_put_extra_header(nlh, sizeof(struct nfgenmsg)); + nfh->nfgen_family = AF_INET6; + nfh->version = NFNETLINK_V0; + nfh->res_id = 0; + + ret = build_cta_tuple_v6(nlh, CTA_TUPLE_ORIG, src_ip, dst_ip, + 12345, 443); + if (ret < 0) { + perror("build_cta_tuple_v6"); + return ret; + } + ret = build_cta_tuple_v6(nlh, CTA_TUPLE_REPLY, dst_ip, src_ip, + 12345, 443); + if (ret < 0) { + perror("build_cta_tuple_v6"); + return ret; + } + return conntrack_data_insert(sock, nlh, zone); +} + +static int count_entries(const struct nlmsghdr *nlh, void *data) +{ + reply_counter++; +} + +static int conntracK_count_zone(struct mnl_socket *sock, uint16_t zone) +{ + char buf[MNL_SOCKET_BUFFER_SIZE]; + struct nlmsghdr *nlh, *rplnlh; + struct nfgenmsg *nfh; + struct nlattr *nest; + unsigned int portid; + int err, ret; + + portid = mnl_socket_get_portid(sock); + + nlh = mnl_nlmsg_put_header(buf); + nlh->nlmsg_type = (NFNL_SUBSYS_CTNETLINK << 8) | IPCTNL_MSG_CT_GET; + nlh->nlmsg_flags = NLM_F_REQUEST | NLM_F_DUMP; + nlh->nlmsg_seq = time(NULL); + + nfh = mnl_nlmsg_put_extra_header(nlh, sizeof(struct nfgenmsg)); + nfh->nfgen_family = AF_UNSPEC; + nfh->version = NFNETLINK_V0; + nfh->res_id = 0; + + mnl_attr_put_u16(nlh, CTA_ZONE, htons(zone)); + + ret = mnl_socket_sendto(sock, nlh, nlh->nlmsg_len); + if (ret < 0) { + perror("mnl_socket_sendto"); + return ret; + } + + reply_counter = 0; + ret = mnl_socket_recvfrom(sock, buf, MNL_SOCKET_BUFFER_SIZE); + while (ret > 0) { + ret = mnl_cb_run(buf, ret, nlh->nlmsg_seq, portid, + count_entries, NULL); + if (ret <= MNL_CB_STOP) + break; + + ret = mnl_socket_recvfrom(sock, buf, MNL_SOCKET_BUFFER_SIZE); + } + if (ret < 0) { + perror("mnl_socket_recvfrom"); + return ret; + } + + return reply_counter; +} + +static int conntrack_flush_zone(struct mnl_socket *sock, uint16_t zone) +{ + char buf[MNL_SOCKET_BUFFER_SIZE]; + struct nlmsghdr *nlh, *rplnlh; + struct nfgenmsg *nfh; + struct nlattr *nest; + unsigned int portid; + int err, ret; + + portid = mnl_socket_get_portid(sock); + + nlh = mnl_nlmsg_put_header(buf); + nlh->nlmsg_type = (NFNL_SUBSYS_CTNETLINK << 8) | IPCTNL_MSG_CT_DELETE; + nlh->nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK; + nlh->nlmsg_seq = time(NULL); + + nfh = mnl_nlmsg_put_extra_header(nlh, sizeof(struct nfgenmsg)); + nfh->nfgen_family = AF_UNSPEC; + nfh->version = NFNETLINK_V0; + nfh->res_id = 0; + + mnl_attr_put_u16(nlh, CTA_ZONE, htons(zone)); + + ret = mnl_socket_sendto(sock, nlh, nlh->nlmsg_len); + if (ret < 0) { + perror("mnl_socket_sendto"); + return ret; + } + + ret = mnl_socket_recvfrom(sock, buf, MNL_SOCKET_BUFFER_SIZE); + if (ret < 0) { + perror("mnl_socket_recvfrom"); + return ret; + } + + ret = mnl_cb_run(buf, ret, nlh->nlmsg_seq, portid, NULL, NULL); + if (ret < 0) { + perror("mnl_cb_run"); + return ret; + } + + return 0; +} + +FIXTURE(conntrack_dump_flush) +{ + struct mnl_socket *sock; +}; + +FIXTURE_SETUP(conntrack_dump_flush) +{ + struct in6_addr src, dst; + int ret; + + self->sock = mnl_socket_open(NETLINK_NETFILTER); + if (!self->sock) { + perror("mnl_socket_open"); + SKIP(return, "cannot open netlink_netfilter socket"); + } + + ret = mnl_socket_bind(self->sock, 0, MNL_SOCKET_AUTOPID); + EXPECT_EQ(ret, 0); + + ret = conntracK_count_zone(self->sock, TEST_ZONE_ID); + if (ret < 0 && errno == EPERM) + SKIP(return, "Needs to be run as root"); + else if (ret < 0 && errno == EOPNOTSUPP) + SKIP(return, "Kernel does not seem to support conntrack zones"); + + ret = conntrack_data_generate_v4(self->sock, 0xf0f0f0f0, 0xf1f1f1f1, + TEST_ZONE_ID); + EXPECT_EQ(ret, 0); + ret = conntrack_data_generate_v4(self->sock, 0xf2f2f2f2, 0xf3f3f3f3, + TEST_ZONE_ID + 1); + EXPECT_EQ(ret, 0); + ret = conntrack_data_generate_v4(self->sock, 0xf4f4f4f4, 0xf5f5f5f5, + TEST_ZONE_ID + 2); + EXPECT_EQ(ret, 0); + ret = conntrack_data_generate_v4(self->sock, 0xf6f6f6f6, 0xf7f7f7f7, + NF_CT_DEFAULT_ZONE_ID); + EXPECT_EQ(ret, 0); + + src = (struct in6_addr) {{ + .__u6_addr32 = { + 0xb80d0120, + 0x00000000, + 0x00000000, + 0x01000000 + } + }}; + dst = (struct in6_addr) {{ + .__u6_addr32 = { + 0xb80d0120, + 0x00000000, + 0x00000000, + 0x02000000 + } + }}; + ret = conntrack_data_generate_v6(self->sock, src, dst, + TEST_ZONE_ID); + EXPECT_EQ(ret, 0); + src = (struct in6_addr) {{ + .__u6_addr32 = { + 0xb80d0120, + 0x00000000, + 0x00000000, + 0x03000000 + } + }}; + dst = (struct in6_addr) {{ + .__u6_addr32 = { + 0xb80d0120, + 0x00000000, + 0x00000000, + 0x04000000 + } + }}; + ret = conntrack_data_generate_v6(self->sock, src, dst, + TEST_ZONE_ID + 1); + EXPECT_EQ(ret, 0); + src = (struct in6_addr) {{ + .__u6_addr32 = { + 0xb80d0120, + 0x00000000, + 0x00000000, + 0x05000000 + } + }}; + dst = (struct in6_addr) {{ + .__u6_addr32 = { + 0xb80d0120, + 0x00000000, + 0x00000000, + 0x06000000 + } + }}; + ret = conntrack_data_generate_v6(self->sock, src, dst, + TEST_ZONE_ID + 2); + EXPECT_EQ(ret, 0); + + src = (struct in6_addr) {{ + .__u6_addr32 = { + 0xb80d0120, + 0x00000000, + 0x00000000, + 0x07000000 + } + }}; + dst = (struct in6_addr) {{ + .__u6_addr32 = { + 0xb80d0120, + 0x00000000, + 0x00000000, + 0x08000000 + } + }}; + ret = conntrack_data_generate_v6(self->sock, src, dst, + NF_CT_DEFAULT_ZONE_ID); + EXPECT_EQ(ret, 0); + + ret = conntracK_count_zone(self->sock, TEST_ZONE_ID); + EXPECT_GE(ret, 2); + if (ret > 2) + SKIP(return, "kernel does not support filtering by zone"); +} + +FIXTURE_TEARDOWN(conntrack_dump_flush) +{ +} + +TEST_F(conntrack_dump_flush, test_dump_by_zone) +{ + int ret; + + ret = conntracK_count_zone(self->sock, TEST_ZONE_ID); + EXPECT_EQ(ret, 2); +} + +TEST_F(conntrack_dump_flush, test_flush_by_zone) +{ + int ret; + + ret = conntrack_flush_zone(self->sock, TEST_ZONE_ID); + EXPECT_EQ(ret, 0); + ret = conntracK_count_zone(self->sock, TEST_ZONE_ID); + EXPECT_EQ(ret, 0); + ret = conntracK_count_zone(self->sock, TEST_ZONE_ID + 1); + EXPECT_EQ(ret, 2); + ret = conntracK_count_zone(self->sock, TEST_ZONE_ID + 2); + EXPECT_EQ(ret, 2); + ret = conntracK_count_zone(self->sock, NF_CT_DEFAULT_ZONE_ID); + EXPECT_EQ(ret, 2); +} + +TEST_F(conntrack_dump_flush, test_flush_by_zone_default) +{ + int ret; + + ret = conntrack_flush_zone(self->sock, NF_CT_DEFAULT_ZONE_ID); + EXPECT_EQ(ret, 0); + ret = conntracK_count_zone(self->sock, TEST_ZONE_ID); + EXPECT_EQ(ret, 2); + ret = conntracK_count_zone(self->sock, TEST_ZONE_ID + 1); + EXPECT_EQ(ret, 2); + ret = conntracK_count_zone(self->sock, TEST_ZONE_ID + 2); + EXPECT_EQ(ret, 2); + ret = conntracK_count_zone(self->sock, NF_CT_DEFAULT_ZONE_ID); + EXPECT_EQ(ret, 0); +} + +TEST_HARNESS_MAIN diff --git a/tools/testing/selftests/net/netfilter/conntrack_icmp_related.sh b/tools/testing/selftests/net/netfilter/conntrack_icmp_related.sh new file mode 100755 index 0000000000..c63d840ead --- /dev/null +++ b/tools/testing/selftests/net/netfilter/conntrack_icmp_related.sh @@ -0,0 +1,278 @@ +#!/bin/bash +# +# check that ICMP df-needed/pkttoobig icmp are set are set as related +# state +# +# Setup is: +# +# nsclient1 -> nsrouter1 -> nsrouter2 -> nsclient2 +# MTU 1500, except for nsrouter2 <-> nsclient2 link (1280). +# ping nsclient2 from nsclient1, checking that conntrack did set RELATED +# 'fragmentation needed' icmp packet. +# +# In addition, nsrouter1 will perform IP masquerading, i.e. also +# check the icmp errors are propagated to the correct host as per +# nat of "established" icmp-echo "connection". + +source lib.sh + +if ! nft --version > /dev/null 2>&1;then + echo "SKIP: Could not run test without nft tool" + exit $ksft_skip +fi + +cleanup() { + cleanup_all_ns +} + +trap cleanup EXIT + +setup_ns nsclient1 nsclient2 nsrouter1 nsrouter2 + +ret=0 + +add_addr() +{ + ns=$1 + dev=$2 + i=$3 + + ip -net "$ns" link set "$dev" up + ip -net "$ns" addr add "192.168.$i.2/24" dev "$dev" + ip -net "$ns" addr add "dead:$i::2/64" dev "$dev" nodad +} + +check_counter() +{ + ns=$1 + name=$2 + expect=$3 + local lret=0 + + if ! ip netns exec "$ns" nft list counter inet filter "$name" | grep -q "$expect"; then + echo "ERROR: counter $name in $ns has unexpected value (expected $expect)" 1>&2 + ip netns exec "$ns" nft list counter inet filter "$name" 1>&2 + lret=1 + fi + + return $lret +} + +check_unknown() +{ + expect="packets 0 bytes 0" + for n in ${nsclient1} ${nsclient2} ${nsrouter1} ${nsrouter2}; do + if ! check_counter "$n" "unknown" "$expect"; then + return 1 + fi + done + + return 0 +} + +DEV=veth0 +ip link add "$DEV" netns "$nsclient1" type veth peer name eth1 netns "$nsrouter1" +ip link add "$DEV" netns "$nsclient2" type veth peer name eth1 netns "$nsrouter2" +ip link add "$DEV" netns "$nsrouter1" type veth peer name eth2 netns "$nsrouter2" + +add_addr "$nsclient1" $DEV 1 +add_addr "$nsclient2" $DEV 2 + +ip -net "$nsrouter1" link set eth1 up +ip -net "$nsrouter1" link set $DEV up + +ip -net "$nsrouter2" link set eth1 mtu 1280 up +ip -net "$nsrouter2" link set eth2 up + +ip -net "$nsclient1" route add default via 192.168.1.1 +ip -net "$nsclient1" -6 route add default via dead:1::1 + +ip -net "$nsclient2" route add default via 192.168.2.1 +ip -net "$nsclient2" route add default via dead:2::1 +ip -net "$nsclient2" link set veth0 mtu 1280 + +ip -net "$nsrouter1" addr add 192.168.1.1/24 dev eth1 +ip -net "$nsrouter1" addr add 192.168.3.1/24 dev veth0 +ip -net "$nsrouter1" addr add dead:1::1/64 dev eth1 nodad +ip -net "$nsrouter1" addr add dead:3::1/64 dev veth0 nodad +ip -net "$nsrouter1" route add default via 192.168.3.10 +ip -net "$nsrouter1" -6 route add default via dead:3::10 + +ip -net "$nsrouter2" addr add 192.168.2.1/24 dev eth1 +ip -net "$nsrouter2" addr add 192.168.3.10/24 dev eth2 +ip -net "$nsrouter2" addr add dead:2::1/64 dev eth1 nodad +ip -net "$nsrouter2" addr add dead:3::10/64 dev eth2 nodad +ip -net "$nsrouter2" route add default via 192.168.3.1 +ip -net "$nsrouter2" route add default via dead:3::1 + +for i in 4 6; do + ip netns exec "$nsrouter1" sysctl -q net.ipv$i.conf.all.forwarding=1 + ip netns exec "$nsrouter2" sysctl -q net.ipv$i.conf.all.forwarding=1 +done + +for netns in "$nsrouter1" "$nsrouter2"; do +ip netns exec "$netns" nft -f - <<EOF +table inet filter { + counter unknown { } + counter related { } + chain forward { + type filter hook forward priority 0; policy accept; + meta l4proto icmpv6 icmpv6 type "packet-too-big" ct state "related" counter name "related" accept + meta l4proto icmp icmp type "destination-unreachable" ct state "related" counter name "related" accept + meta l4proto { icmp, icmpv6 } ct state new,established accept + counter name "unknown" drop + } +} +EOF +done + +ip netns exec "$nsclient1" nft -f - <<EOF +table inet filter { + counter unknown { } + counter related { } + counter redir4 { } + counter redir6 { } + chain input { + type filter hook input priority 0; policy accept; + + icmp type "redirect" ct state "related" counter name "redir4" accept + icmpv6 type "nd-redirect" ct state "related" counter name "redir6" accept + + meta l4proto { icmp, icmpv6 } ct state established,untracked accept + meta l4proto { icmp, icmpv6 } ct state "related" counter name "related" accept + + counter name "unknown" drop + } +} +EOF + +ip netns exec "$nsclient2" nft -f - <<EOF +table inet filter { + counter unknown { } + counter new { } + counter established { } + + chain input { + type filter hook input priority 0; policy accept; + meta l4proto { icmp, icmpv6 } ct state established,untracked accept + + meta l4proto { icmp, icmpv6 } ct state "new" counter name "new" accept + meta l4proto { icmp, icmpv6 } ct state "established" counter name "established" accept + counter name "unknown" drop + } + chain output { + type filter hook output priority 0; policy accept; + meta l4proto { icmp, icmpv6 } ct state established,untracked accept + + meta l4proto { icmp, icmpv6 } ct state "new" counter name "new" + meta l4proto { icmp, icmpv6 } ct state "established" counter name "established" + counter name "unknown" drop + } +} +EOF + +# make sure NAT core rewrites adress of icmp error if nat is used according to +# conntrack nat information (icmp error will be directed at nsrouter1 address, +# but it needs to be routed to nsclient1 address). +ip netns exec "$nsrouter1" nft -f - <<EOF +table ip nat { + chain postrouting { + type nat hook postrouting priority 0; policy accept; + ip protocol icmp oifname "veth0" counter masquerade + } +} +table ip6 nat { + chain postrouting { + type nat hook postrouting priority 0; policy accept; + ip6 nexthdr icmpv6 oifname "veth0" counter masquerade + } +} +EOF + +if ! ip netns exec "$nsclient1" ping -c 1 -s 1000 -q -M "do" 192.168.2.2 >/dev/null; then + echo "ERROR: netns ip routing/connectivity broken" 1>&2 + exit 1 +fi +if ! ip netns exec "$nsclient1" ping -c 1 -s 1000 -q dead:2::2 >/dev/null; then + echo "ERROR: netns ipv6 routing/connectivity broken" 1>&2 + exit 1 +fi + +if ! check_unknown; then + ret=1 +fi + +expect="packets 0 bytes 0" +for netns in "$nsrouter1" "$nsrouter2" "$nsclient1";do + if ! check_counter "$netns" "related" "$expect"; then + ret=1 + fi +done + +expect="packets 2 bytes 2076" +if ! check_counter "$nsclient2" "new" "$expect"; then + ret=1 +fi + +if ip netns exec "$nsclient1" ping -W 0.5 -q -c 1 -s 1300 -M "do" 192.168.2.2 > /dev/null; then + echo "ERROR: ping should have failed with PMTU too big error" 1>&2 + ret=1 +fi + +# nsrouter2 should have generated the icmp error, so +# related counter should be 0 (its in forward). +expect="packets 0 bytes 0" +if ! check_counter "$nsrouter2" "related" "$expect"; then + ret=1 +fi + +# but nsrouter1 should have seen it, same for nsclient1. +expect="packets 1 bytes 576" +for netns in ${nsrouter1} ${nsclient1};do + if ! check_counter "$netns" "related" "$expect"; then + ret=1 + fi +done + +if ip netns exec "${nsclient1}" ping6 -W 0.5 -c 1 -s 1300 dead:2::2 > /dev/null; then + echo "ERROR: ping6 should have failed with PMTU too big error" 1>&2 + ret=1 +fi + +expect="packets 2 bytes 1856" +for netns in "${nsrouter1}" "${nsclient1}";do + if ! check_counter "$netns" "related" "$expect"; then + ret=1 + fi +done + +if [ $ret -eq 0 ];then + echo "PASS: icmp mtu error had RELATED state" +else + echo "ERROR: icmp error RELATED state test has failed" +fi + +# add 'bad' route, expect icmp REDIRECT to be generated +ip netns exec "${nsclient1}" ip route add 192.168.1.42 via 192.168.1.1 +ip netns exec "${nsclient1}" ip route add dead:1::42 via dead:1::1 + +ip netns exec "$nsclient1" ping -W 1 -q -i 0.5 -c 2 192.168.1.42 > /dev/null + +expect="packets 1 bytes 112" +if ! check_counter "$nsclient1" "redir4" "$expect"; then + ret=1 +fi + +ip netns exec "$nsclient1" ping -W 1 -c 1 dead:1::42 > /dev/null +expect="packets 1 bytes 192" +if ! check_counter "$nsclient1" "redir6" "$expect"; then + ret=1 +fi + +if [ $ret -eq 0 ];then + echo "PASS: icmp redirects had RELATED state" +else + echo "ERROR: icmp redirect RELATED state test has failed" +fi + +exit $ret diff --git a/tools/testing/selftests/net/netfilter/conntrack_ipip_mtu.sh b/tools/testing/selftests/net/netfilter/conntrack_ipip_mtu.sh new file mode 100755 index 0000000000..9832a5d019 --- /dev/null +++ b/tools/testing/selftests/net/netfilter/conntrack_ipip_mtu.sh @@ -0,0 +1,191 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +source lib.sh + +# Conntrack needs to reassemble fragments in order to have complete +# packets for rule matching. Reassembly can lead to packet loss. + +# Consider the following setup: +# +--------+ +---------+ +--------+ +# |Router A|-------|Wanrouter|-------|Router B| +# | |.IPIP..| |..IPIP.| | +# +--------+ +---------+ +--------+ +# / mtu 1400 \ +# / \ +#+--------+ +--------+ +#|Client A| |Client B| +#| | | | +#+--------+ +--------+ + +# Router A and Router B use IPIP tunnel interfaces to tunnel traffic +# between Client A and Client B over WAN. Wanrouter has MTU 1400 set +# on its interfaces. + +rx=$(mktemp) + +checktool "iptables --version" "run test without iptables" +checktool "socat -h" "run test without socat" + +setup_ns r_a r_b r_w c_a c_b + +cleanup() { + cleanup_all_ns + rm -f "$rx" +} + +trap cleanup EXIT + +listener_ready() +{ + ns="$1" + port="$2" + ss -N "$ns" -lnu -o "sport = :$port" | grep -q "$port" +} + +test_path() { + msg="$1" + + ip netns exec "$c_b" socat -t 3 - udp4-listen:5000,reuseaddr > "$rx" < /dev/null & + + busywait $BUSYWAIT_TIMEOUT listener_ready "$c_b" 5000 + + for i in 1 2 3; do + head -c1400 /dev/zero | tr "\000" "a" | \ + ip netns exec "$c_a" socat -t 1 -u STDIN UDP:192.168.20.2:5000 + done + + wait + + bytes=$(wc -c < "$rx") + + if [ "$bytes" -eq 1400 ];then + echo "OK: PMTU $msg connection tracking" + else + echo "FAIL: PMTU $msg connection tracking: got $bytes, expected 1400" + exit 1 + fi +} + +# Detailed setup for Router A +# --------------------------- +# Interfaces: +# eth0: 10.2.2.1/24 +# eth1: 192.168.10.1/24 +# ipip0: No IP address, local 10.2.2.1 remote 10.4.4.1 +# Routes: +# 192.168.20.0/24 dev ipip0 (192.168.20.0/24 is subnet of Client B) +# 10.4.4.1 via 10.2.2.254 (Router B via Wanrouter) +# No iptables rules at all. + +ip link add veth0 netns "$r_a" type veth peer name veth0 netns "$r_w" +ip link add veth1 netns "$r_a" type veth peer name veth0 netns "$c_a" + +l_addr="10.2.2.1" +r_addr="10.4.4.1" +ip netns exec "$r_a" ip link add ipip0 type ipip local "$l_addr" remote "$r_addr" mode ipip || exit $ksft_skip + +for dev in lo veth0 veth1 ipip0; do + ip -net "$r_a" link set "$dev" up +done + +ip -net "$r_a" addr add 10.2.2.1/24 dev veth0 +ip -net "$r_a" addr add 192.168.10.1/24 dev veth1 + +ip -net "$r_a" route add 192.168.20.0/24 dev ipip0 +ip -net "$r_a" route add 10.4.4.0/24 via 10.2.2.254 + +ip netns exec "$r_a" sysctl -q net.ipv4.conf.all.forwarding=1 > /dev/null + +# Detailed setup for Router B +# --------------------------- +# Interfaces: +# eth0: 10.4.4.1/24 +# eth1: 192.168.20.1/24 +# ipip0: No IP address, local 10.4.4.1 remote 10.2.2.1 +# Routes: +# 192.168.10.0/24 dev ipip0 (192.168.10.0/24 is subnet of Client A) +# 10.2.2.1 via 10.4.4.254 (Router A via Wanrouter) +# No iptables rules at all. + +ip link add veth0 netns "$r_b" type veth peer name veth1 netns "$r_w" +ip link add veth1 netns "$r_b" type veth peer name veth0 netns "$c_b" + +l_addr="10.4.4.1" +r_addr="10.2.2.1" + +ip netns exec "$r_b" ip link add ipip0 type ipip local "${l_addr}" remote "${r_addr}" mode ipip || exit $ksft_skip + +for dev in veth0 veth1 ipip0; do + ip -net "$r_b" link set $dev up +done + +ip -net "$r_b" addr add 10.4.4.1/24 dev veth0 +ip -net "$r_b" addr add 192.168.20.1/24 dev veth1 + +ip -net "$r_b" route add 192.168.10.0/24 dev ipip0 +ip -net "$r_b" route add 10.2.2.0/24 via 10.4.4.254 +ip netns exec "$r_b" sysctl -q net.ipv4.conf.all.forwarding=1 > /dev/null + +# Client A +ip -net "$c_a" addr add 192.168.10.2/24 dev veth0 +ip -net "$c_a" link set dev veth0 up +ip -net "$c_a" route add default via 192.168.10.1 + +# Client A +ip -net "$c_b" addr add 192.168.20.2/24 dev veth0 +ip -net "$c_b" link set dev veth0 up +ip -net "$c_b" route add default via 192.168.20.1 + +# Wan +ip -net "$r_w" addr add 10.2.2.254/24 dev veth0 +ip -net "$r_w" addr add 10.4.4.254/24 dev veth1 + +ip -net "$r_w" link set dev veth0 up mtu 1400 +ip -net "$r_w" link set dev veth1 up mtu 1400 + +ip -net "$r_a" link set dev veth0 mtu 1400 +ip -net "$r_b" link set dev veth0 mtu 1400 + +ip netns exec "$r_w" sysctl -q net.ipv4.conf.all.forwarding=1 > /dev/null + +# Path MTU discovery +# ------------------ +# Running tracepath from Client A to Client B shows PMTU discovery is working +# as expected: +# +# clienta:~# tracepath 192.168.20.2 +# 1?: [LOCALHOST] pmtu 1500 +# 1: 192.168.10.1 0.867ms +# 1: 192.168.10.1 0.302ms +# 2: 192.168.10.1 0.312ms pmtu 1480 +# 2: no reply +# 3: 192.168.10.1 0.510ms pmtu 1380 +# 3: 192.168.20.2 2.320ms reached +# Resume: pmtu 1380 hops 3 back 3 + +# ip netns exec ${c_a} traceroute --mtu 192.168.20.2 + +# Router A has learned PMTU (1400) to Router B from Wanrouter. +# Client A has learned PMTU (1400 - IPIP overhead = 1380) to Client B +# from Router A. + +#Send large UDP packet +#--------------------- +#Now we send a 1400 bytes UDP packet from Client A to Client B: + +# clienta:~# head -c1400 /dev/zero | tr "\000" "a" | socat -u STDIN UDP:192.168.20.2:5000 +test_path "without" + +# The IPv4 stack on Client A already knows the PMTU to Client B, so the +# UDP packet is sent as two fragments (1380 + 20). Router A forwards the +# fragments between eth1 and ipip0. The fragments fit into the tunnel and +# reach their destination. + +#When sending the large UDP packet again, Router A now reassembles the +#fragments before routing the packet over ipip0. The resulting IPIP +#packet is too big (1400) for the tunnel PMTU (1380) to Router B, it is +#dropped on Router A before sending. + +ip netns exec "$r_a" iptables -A FORWARD -m conntrack --ctstate NEW +test_path "with" diff --git a/tools/testing/selftests/net/netfilter/conntrack_sctp_collision.sh b/tools/testing/selftests/net/netfilter/conntrack_sctp_collision.sh new file mode 100755 index 0000000000..d860f7d974 --- /dev/null +++ b/tools/testing/selftests/net/netfilter/conntrack_sctp_collision.sh @@ -0,0 +1,87 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Testing For SCTP COLLISION SCENARIO as Below: +# +# 14:35:47.655279 IP CLIENT_IP.PORT > SERVER_IP.PORT: sctp (1) [INIT] [init tag: 2017837359] +# 14:35:48.353250 IP SERVER_IP.PORT > CLIENT_IP.PORT: sctp (1) [INIT] [init tag: 1187206187] +# 14:35:48.353275 IP CLIENT_IP.PORT > SERVER_IP.PORT: sctp (1) [INIT ACK] [init tag: 2017837359] +# 14:35:48.353283 IP SERVER_IP.PORT > CLIENT_IP.PORT: sctp (1) [COOKIE ECHO] +# 14:35:48.353977 IP CLIENT_IP.PORT > SERVER_IP.PORT: sctp (1) [COOKIE ACK] +# 14:35:48.855335 IP SERVER_IP.PORT > CLIENT_IP.PORT: sctp (1) [INIT ACK] [init tag: 164579970] +# +# TOPO: SERVER_NS (link0)<--->(link1) ROUTER_NS (link2)<--->(link3) CLIENT_NS + +source lib.sh + +CLIENT_IP="198.51.200.1" +CLIENT_PORT=1234 + +SERVER_IP="198.51.100.1" +SERVER_PORT=1234 + +CLIENT_GW="198.51.200.2" +SERVER_GW="198.51.100.2" + +# setup the topo +setup() { + setup_ns CLIENT_NS SERVER_NS ROUTER_NS + ip -n "$SERVER_NS" link add link0 type veth peer name link1 netns "$ROUTER_NS" + ip -n "$CLIENT_NS" link add link3 type veth peer name link2 netns "$ROUTER_NS" + + ip -n "$SERVER_NS" link set link0 up + ip -n "$SERVER_NS" addr add $SERVER_IP/24 dev link0 + ip -n "$SERVER_NS" route add $CLIENT_IP dev link0 via $SERVER_GW + + ip -n "$ROUTER_NS" link set link1 up + ip -n "$ROUTER_NS" link set link2 up + ip -n "$ROUTER_NS" addr add $SERVER_GW/24 dev link1 + ip -n "$ROUTER_NS" addr add $CLIENT_GW/24 dev link2 + ip net exec "$ROUTER_NS" sysctl -wq net.ipv4.ip_forward=1 + + ip -n "$CLIENT_NS" link set link3 up + ip -n "$CLIENT_NS" addr add $CLIENT_IP/24 dev link3 + ip -n "$CLIENT_NS" route add $SERVER_IP dev link3 via $CLIENT_GW + + # simulate the delay on OVS upcall by setting up a delay for INIT_ACK with + # tc on $SERVER_NS side + tc -n "$SERVER_NS" qdisc add dev link0 root handle 1: htb r2q 64 + tc -n "$SERVER_NS" class add dev link0 parent 1: classid 1:1 htb rate 100mbit + tc -n "$SERVER_NS" filter add dev link0 parent 1: protocol ip u32 match ip protocol 132 \ + 0xff match u8 2 0xff at 32 flowid 1:1 + if ! tc -n "$SERVER_NS" qdisc add dev link0 parent 1:1 handle 10: netem delay 1200ms; then + echo "SKIP: Cannot add netem qdisc" + exit $ksft_skip + fi + + # simulate the ctstate check on OVS nf_conntrack + ip net exec "$ROUTER_NS" iptables -A FORWARD -m state --state INVALID,UNTRACKED -j DROP + ip net exec "$ROUTER_NS" iptables -A INPUT -p sctp -j DROP + + # use a smaller number for assoc's max_retrans to reproduce the issue + modprobe -q sctp + ip net exec "$CLIENT_NS" sysctl -wq net.sctp.association_max_retrans=3 +} + +cleanup() { + ip net exec "$CLIENT_NS" pkill sctp_collision >/dev/null 2>&1 + ip net exec "$SERVER_NS" pkill sctp_collision >/dev/null 2>&1 + cleanup_all_ns +} + +do_test() { + ip net exec "$SERVER_NS" ./sctp_collision server \ + $SERVER_IP $SERVER_PORT $CLIENT_IP $CLIENT_PORT & + ip net exec "$CLIENT_NS" ./sctp_collision client \ + $CLIENT_IP $CLIENT_PORT $SERVER_IP $SERVER_PORT +} + +# NOTE: one way to work around the issue is set a smaller hb_interval +# ip net exec $CLIENT_NS sysctl -wq net.sctp.hb_interval=3500 + +# run the test case +trap cleanup EXIT +setup && \ +echo "Test for SCTP Collision in nf_conntrack:" && \ +do_test && echo "PASS!" +exit $? diff --git a/tools/testing/selftests/net/netfilter/conntrack_tcp_unreplied.sh b/tools/testing/selftests/net/netfilter/conntrack_tcp_unreplied.sh new file mode 100755 index 0000000000..121ea93c01 --- /dev/null +++ b/tools/testing/selftests/net/netfilter/conntrack_tcp_unreplied.sh @@ -0,0 +1,164 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Check that UNREPLIED tcp conntrack will eventually timeout. +# + +source lib.sh + +if ! nft --version > /dev/null 2>&1;then + echo "SKIP: Could not run test without nft tool" + exit $ksft_skip +fi + +if ! conntrack --version > /dev/null 2>&1;then + echo "SKIP: Could not run test without conntrack tool" + exit $ksft_skip +fi + +ret=0 + +cleanup() { + ip netns pids "$ns1" | xargs kill 2>/dev/null + ip netns pids "$ns2" | xargs kill 2>/dev/null + + cleanup_all_ns +} + +ipv4() { + echo -n 192.168."$1".2 +} + +check_counter() +{ + ns=$1 + name=$2 + expect=$3 + local lret=0 + + if ! ip netns exec "$ns2" nft list counter inet filter "$name" | grep -q "$expect"; then + echo "ERROR: counter $name in $ns2 has unexpected value (expected $expect)" 1>&2 + ip netns exec "$ns2" nft list counter inet filter "$name" 1>&2 + lret=1 + fi + + return $lret +} + +trap cleanup EXIT + +# Create test namespaces +setup_ns ns1 ns2 + +# Connect the namespace to the host using a veth pair +ip -net "$ns1" link add name veth1 type veth peer name veth2 +ip -net "$ns1" link set netns "$ns2" dev veth2 + +ip -net "$ns1" link set up dev lo +ip -net "$ns2" link set up dev lo +ip -net "$ns1" link set up dev veth1 +ip -net "$ns2" link set up dev veth2 + +ip -net "$ns2" addr add 10.11.11.2/24 dev veth2 +ip -net "$ns2" route add default via 10.11.11.1 + +ip netns exec "$ns2" sysctl -q net.ipv4.conf.veth2.forwarding=1 + +# add a rule inside NS so we enable conntrack +ip netns exec "$ns1" nft -f - <<EOF +table inet filter { + chain input { + type filter hook input priority 0; policy accept; + ct state established accept + } +} +EOF + +ip -net "$ns1" addr add 10.11.11.1/24 dev veth1 +ip -net "$ns1" route add 10.99.99.99 via 10.11.11.2 + +# Check connectivity works +ip netns exec "$ns1" ping -q -c 2 10.11.11.2 >/dev/null || exit 1 + +ip netns exec "$ns2" socat -u -4 TCP-LISTEN:8080,reuseaddr STDOUT & + +ip netns exec "$ns2" nft -f - <<EOF +table inet filter { + counter connreq { } + counter redir { } + chain input { + type filter hook input priority 0; policy accept; + ct state new tcp flags syn ip daddr 10.99.99.99 tcp dport 80 counter name "connreq" accept + ct state new ct status dnat tcp dport 8080 counter name "redir" accept + } +} +EOF +if [ $? -ne 0 ]; then + echo "ERROR: Could not load nft rules" + exit 1 +fi + +ip netns exec "$ns2" sysctl -q net.netfilter.nf_conntrack_tcp_timeout_syn_sent=10 + +echo "INFO: connect $ns1 -> $ns2 to the virtual ip" +ip netns exec "$ns1" bash -c 'for i in $(seq 1 $BUSYWAIT_TIMEOUT) ; do + socat -u STDIN TCP:10.99.99.99:80 < /dev/null + sleep 0.1 + done' & + +wait_for_attempt() +{ + count=$(ip netns exec "$ns2" conntrack -L -p tcp --dport 80 2>/dev/null | wc -l) + if [ "$count" -gt 0 ]; then + return 0 + fi + + return 1 +} + +# wait for conntrack to pick the new connection request up before loading +# the nat redirect rule. +if ! busywait "$BUSYWAIT_TIMEOUT" wait_for_attempt; then + echo "ERROR: $ns2 did not pick up tcp connection from peer" + exit 1 +fi + +ip netns exec "$ns2" nft -f - <<EOF +table inet nat { + chain prerouting { + type nat hook prerouting priority 0; policy accept; + ip daddr 10.99.99.99 tcp dport 80 redirect to :8080 + } +} +EOF +if [ $? -ne 0 ]; then + echo "ERROR: Could not load nat redirect" + exit 1 +fi + +wait_for_redirect() +{ + count=$(ip netns exec "$ns2" conntrack -L -p tcp --reply-port-src 8080 2>/dev/null | wc -l) + if [ "$count" -gt 0 ]; then + return 0 + fi + + return 1 +} +echo "INFO: NAT redirect added in ns $ns2, waiting for $BUSYWAIT_TIMEOUT ms for nat to take effect" + +busywait "$BUSYWAIT_TIMEOUT" wait_for_redirect +ret=$? + +expect="packets 1 bytes 60" +if ! check_counter "$ns2" "redir" "$expect"; then + ret=1 +fi + +if [ $ret -eq 0 ];then + echo "PASS: redirection counter has expected values" +else + echo "ERROR: no tcp connection was redirected" +fi + +exit $ret diff --git a/tools/testing/selftests/net/netfilter/conntrack_vrf.sh b/tools/testing/selftests/net/netfilter/conntrack_vrf.sh new file mode 100755 index 0000000000..073e8e62d3 --- /dev/null +++ b/tools/testing/selftests/net/netfilter/conntrack_vrf.sh @@ -0,0 +1,220 @@ +#!/bin/bash + +# This script demonstrates interaction of conntrack and vrf. +# The vrf driver calls the netfilter hooks again, with oif/iif +# pointing at the VRF device. +# +# For ingress, this means first iteration has iifname of lower/real +# device. In this script, thats veth0. +# Second iteration is iifname set to vrf device, tvrf in this script. +# +# For egress, this is reversed: first iteration has the vrf device, +# second iteration is done with the lower/real/veth0 device. +# +# test_ct_zone_in demonstrates unexpected change of nftables +# behavior # caused by commit 09e856d54bda5f28 "vrf: Reset skb conntrack +# connection on VRF rcv" +# +# It was possible to assign conntrack zone to a packet (or mark it for +# `notracking`) in the prerouting chain before conntrack, based on real iif. +# +# After the change, the zone assignment is lost and the zone is assigned based +# on the VRF master interface (in case such a rule exists). +# assignment is lost. Instead, assignment based on the `iif` matching +# Thus it is impossible to distinguish packets based on the original +# interface. +# +# test_masquerade_vrf and test_masquerade_veth0 demonstrate the problem +# that was supposed to be fixed by the commit mentioned above to make sure +# that any fix to test case 1 won't break masquerade again. + +source lib.sh + +IP0=172.30.30.1 +IP1=172.30.30.2 +PFXL=30 +ret=0 + +cleanup() +{ + ip netns pids $ns0 | xargs kill 2>/dev/null + ip netns pids $ns1 | xargs kill 2>/dev/null + + cleanup_all_ns +} + +checktool "nft --version" "run test without nft" +checktool "conntrack --version" "run test without conntrack" +checktool "socat -h" "run test without socat" + +trap cleanup EXIT + +setup_ns ns0 ns1 + +ip netns exec "$ns0" sysctl -q -w net.ipv4.conf.default.rp_filter=0 +ip netns exec "$ns0" sysctl -q -w net.ipv4.conf.all.rp_filter=0 +ip netns exec "$ns0" sysctl -q -w net.ipv4.conf.all.rp_filter=0 + +if ! ip link add veth0 netns "$ns0" type veth peer name veth0 netns "$ns1" > /dev/null 2>&1; then + echo "SKIP: Could not add veth device" + exit $ksft_skip +fi + +if ! ip -net "$ns0" li add tvrf type vrf table 9876; then + echo "SKIP: Could not add vrf device" + exit $ksft_skip +fi + +ip -net "$ns0" li set veth0 master tvrf +ip -net "$ns0" li set tvrf up +ip -net "$ns0" li set veth0 up +ip -net "$ns1" li set veth0 up + +ip -net "$ns0" addr add $IP0/$PFXL dev veth0 +ip -net "$ns1" addr add $IP1/$PFXL dev veth0 + +listener_ready() +{ + local ns="$1" + + ss -N "$ns" -l -n -t -o "sport = :55555" | grep -q "55555" +} + +ip netns exec "$ns1" socat -u -4 TCP-LISTEN:55555,reuseaddr,fork STDOUT > /dev/null & +busywait $BUSYWAIT_TIMEOUT listener_ready "$ns1" + +# test vrf ingress handling. +# The incoming connection should be placed in conntrack zone 1, +# as decided by the first iteration of the ruleset. +test_ct_zone_in() +{ +ip netns exec "$ns0" nft -f - <<EOF +table testct { + chain rawpre { + type filter hook prerouting priority raw; + + iif { veth0, tvrf } counter meta nftrace set 1 + iif veth0 counter ct zone set 1 counter return + iif tvrf counter ct zone set 2 counter return + ip protocol icmp counter + notrack counter + } + + chain rawout { + type filter hook output priority raw; + + oif veth0 counter ct zone set 1 counter return + oif tvrf counter ct zone set 2 counter return + notrack counter + } +} +EOF + ip netns exec "$ns1" ping -W 1 -c 1 -I veth0 "$IP0" > /dev/null + + # should be in zone 1, not zone 2 + count=$(ip netns exec "$ns0" conntrack -L -s $IP1 -d $IP0 -p icmp --zone 1 2>/dev/null | wc -l) + if [ "$count" -eq 1 ]; then + echo "PASS: entry found in conntrack zone 1" + else + echo "FAIL: entry not found in conntrack zone 1" + count=$(ip netns exec "$ns0" conntrack -L -s $IP1 -d $IP0 -p icmp --zone 2 2> /dev/null | wc -l) + if [ "$count" -eq 1 ]; then + echo "FAIL: entry found in zone 2 instead" + else + echo "FAIL: entry not in zone 1 or 2, dumping table" + ip netns exec "$ns0" conntrack -L + ip netns exec "$ns0" nft list ruleset + fi + fi +} + +# add masq rule that gets evaluated w. outif set to vrf device. +# This tests the first iteration of the packet through conntrack, +# oifname is the vrf device. +test_masquerade_vrf() +{ + local qdisc=$1 + + if [ "$qdisc" != "default" ]; then + tc -net "$ns0" qdisc add dev tvrf root "$qdisc" + fi + + ip netns exec "$ns0" conntrack -F 2>/dev/null + +ip netns exec "$ns0" nft -f - <<EOF +flush ruleset +table ip nat { + chain rawout { + type filter hook output priority raw; + + oif tvrf ct state untracked counter + } + chain postrouting2 { + type filter hook postrouting priority mangle; + + oif tvrf ct state untracked counter + } + chain postrouting { + type nat hook postrouting priority 0; + # NB: masquerade should always be combined with 'oif(name) bla', + # lack of this is intentional here, we want to exercise double-snat. + ip saddr 172.30.30.0/30 counter masquerade random + } +} +EOF + if ! ip netns exec "$ns0" ip vrf exec tvrf socat -u -4 STDIN TCP:"$IP1":55555 < /dev/null > /dev/null;then + echo "FAIL: connect failure with masquerade + sport rewrite on vrf device" + ret=1 + return + fi + + # must also check that nat table was evaluated on second (lower device) iteration. + if ip netns exec "$ns0" nft list table ip nat |grep -q 'counter packets 1' && + ip netns exec "$ns0" nft list table ip nat |grep -q 'untracked counter packets [1-9]'; then + echo "PASS: connect with masquerade + sport rewrite on vrf device ($qdisc qdisc)" + else + echo "FAIL: vrf rules have unexpected counter value" + ret=1 + fi + + if [ "$qdisc" != "default" ]; then + tc -net "$ns0" qdisc del dev tvrf root + fi +} + +# add masq rule that gets evaluated w. outif set to veth device. +# This tests the 2nd iteration of the packet through conntrack, +# oifname is the lower device (veth0 in this case). +test_masquerade_veth() +{ + ip netns exec "$ns0" conntrack -F 2>/dev/null +ip netns exec "$ns0" nft -f - <<EOF +flush ruleset +table ip nat { + chain postrouting { + type nat hook postrouting priority 0; + meta oif veth0 ip saddr 172.30.30.0/30 counter masquerade random + } +} +EOF + if ! ip netns exec "$ns0" ip vrf exec tvrf socat -u -4 STDIN TCP:"$IP1":55555 < /dev/null > /dev/null;then + echo "FAIL: connect failure with masquerade + sport rewrite on veth device" + ret=1 + return + fi + + # must also check that nat table was evaluated on second (lower device) iteration. + if ip netns exec "$ns0" nft list table ip nat |grep -q 'counter packets 1'; then + echo "PASS: connect with masquerade + sport rewrite on veth device" + else + echo "FAIL: vrf masq rule has unexpected counter value" + ret=1 + fi +} + +test_ct_zone_in +test_masquerade_vrf "default" +test_masquerade_vrf "pfifo" +test_masquerade_veth + +exit $ret diff --git a/tools/testing/selftests/net/netfilter/ipvs.sh b/tools/testing/selftests/net/netfilter/ipvs.sh new file mode 100755 index 0000000000..4ceee9fb39 --- /dev/null +++ b/tools/testing/selftests/net/netfilter/ipvs.sh @@ -0,0 +1,211 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# End-to-end ipvs test suite +# Topology: +#--------------------------------------------------------------+ +# | | +# ns0 | ns1 | +# ----------- | ----------- ----------- | +# | veth01 | --------- | veth10 | | veth12 | | +# ----------- peer ----------- ----------- | +# | | | | +# ----------- | | | +# | br0 | |----------------- peer |--------------| +# ----------- | | | +# | | | | +# ---------- peer ---------- ----------- | +# | veth02 | --------- | veth20 | | veth21 | | +# ---------- | ---------- ----------- | +# | ns2 | +# | | +#--------------------------------------------------------------+ +# +# We assume that all network driver are loaded +# + +source lib.sh + +ret=0 +GREEN='\033[0;92m' +RED='\033[0;31m' +NC='\033[0m' # No Color + +readonly port=8080 + +readonly vip_v4=207.175.44.110 +readonly cip_v4=10.0.0.2 +readonly gip_v4=10.0.0.1 +readonly dip_v4=172.16.0.1 +readonly rip_v4=172.16.0.2 +readonly sip_v4=10.0.0.3 + +readonly infile="$(mktemp)" +readonly outfile="$(mktemp)" +readonly datalen=32 + +sysipvsnet="/proc/sys/net/ipv4/vs/" +if [ ! -d $sysipvsnet ]; then + if ! modprobe -q ip_vs; then + echo "skip: could not run test without ipvs module" + exit $ksft_skip + fi +fi + +checktool "ipvsadm -v" "run test without ipvsadm" +checktool "socat -h" "run test without socat" + +setup() { + setup_ns ns0 ns1 ns2 + + ip link add veth01 netns "${ns0}" type veth peer name veth10 netns "${ns1}" + ip link add veth02 netns "${ns0}" type veth peer name veth20 netns "${ns2}" + ip link add veth12 netns "${ns1}" type veth peer name veth21 netns "${ns2}" + + ip netns exec "${ns0}" ip link set veth01 up + ip netns exec "${ns0}" ip link set veth02 up + ip netns exec "${ns0}" ip link add br0 type bridge + ip netns exec "${ns0}" ip link set veth01 master br0 + ip netns exec "${ns0}" ip link set veth02 master br0 + ip netns exec "${ns0}" ip link set br0 up + ip netns exec "${ns0}" ip addr add "${cip_v4}/24" dev br0 + + ip netns exec "${ns1}" ip link set veth10 up + ip netns exec "${ns1}" ip addr add "${gip_v4}/24" dev veth10 + ip netns exec "${ns1}" ip link set veth12 up + ip netns exec "${ns1}" ip addr add "${dip_v4}/24" dev veth12 + + ip netns exec "${ns2}" ip link set veth21 up + ip netns exec "${ns2}" ip addr add "${rip_v4}/24" dev veth21 + ip netns exec "${ns2}" ip link set veth20 up + ip netns exec "${ns2}" ip addr add "${sip_v4}/24" dev veth20 + + sleep 1 + + dd if=/dev/urandom of="${infile}" bs="${datalen}" count=1 status=none +} + +cleanup() { + cleanup_all_ns + + if [ -f "${outfile}" ]; then + rm "${outfile}" + fi + if [ -f "${infile}" ]; then + rm "${infile}" + fi +} + +server_listen() { + ip netns exec "$ns2" socat -u -4 TCP-LISTEN:8080,reuseaddr STDOUT > "${outfile}" & + server_pid=$! + sleep 0.2 +} + +client_connect() { + ip netns exec "${ns0}" timeout 2 socat -u -4 STDIN TCP:"${vip_v4}":"${port}" < "${infile}" +} + +verify_data() { + wait "${server_pid}" + cmp "$infile" "$outfile" 2>/dev/null +} + +test_service() { + server_listen + client_connect + verify_data +} + + +test_dr() { + ip netns exec "${ns0}" ip route add "${vip_v4}" via "${gip_v4}" dev br0 + + ip netns exec "${ns1}" sysctl -qw net.ipv4.ip_forward=1 + ip netns exec "${ns1}" ipvsadm -A -t "${vip_v4}:${port}" -s rr + ip netns exec "${ns1}" ipvsadm -a -t "${vip_v4}:${port}" -r "${rip_v4}:${port}" + ip netns exec "${ns1}" ip addr add "${vip_v4}/32" dev lo:1 + + # avoid incorrect arp response + ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.all.arp_ignore=1 + ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.all.arp_announce=2 + # avoid reverse route lookup + ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.all.rp_filter=0 + ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.veth21.rp_filter=0 + ip netns exec "${ns2}" ip addr add "${vip_v4}/32" dev lo:1 + + test_service +} + +test_nat() { + ip netns exec "${ns0}" ip route add "${vip_v4}" via "${gip_v4}" dev br0 + + ip netns exec "${ns1}" sysctl -qw net.ipv4.ip_forward=1 + ip netns exec "${ns1}" ipvsadm -A -t "${vip_v4}:${port}" -s rr + ip netns exec "${ns1}" ipvsadm -a -m -t "${vip_v4}:${port}" -r "${rip_v4}:${port}" + ip netns exec "${ns1}" ip addr add "${vip_v4}/32" dev lo:1 + + ip netns exec "${ns2}" ip link del veth20 + ip netns exec "${ns2}" ip route add default via "${dip_v4}" dev veth21 + + test_service +} + +test_tun() { + ip netns exec "${ns0}" ip route add "${vip_v4}" via "${gip_v4}" dev br0 + + ip netns exec "${ns1}" modprobe -q ipip + ip netns exec "${ns1}" ip link set tunl0 up + ip netns exec "${ns1}" sysctl -qw net.ipv4.ip_forward=0 + ip netns exec "${ns1}" sysctl -qw net.ipv4.conf.all.send_redirects=0 + ip netns exec "${ns1}" sysctl -qw net.ipv4.conf.default.send_redirects=0 + ip netns exec "${ns1}" ipvsadm -A -t "${vip_v4}:${port}" -s rr + ip netns exec "${ns1}" ipvsadm -a -i -t "${vip_v4}:${port}" -r ${rip_v4}:${port} + ip netns exec "${ns1}" ip addr add ${vip_v4}/32 dev lo:1 + + ip netns exec "${ns2}" modprobe -q ipip + ip netns exec "${ns2}" ip link set tunl0 up + ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.all.arp_ignore=1 + ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.all.arp_announce=2 + ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.all.rp_filter=0 + ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.tunl0.rp_filter=0 + ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.veth21.rp_filter=0 + ip netns exec "${ns2}" ip addr add "${vip_v4}/32" dev lo:1 + + test_service +} + +run_tests() { + local errors= + + echo "Testing DR mode..." + cleanup + setup + test_dr + errors=$(( $errors + $? )) + + echo "Testing NAT mode..." + cleanup + setup + test_nat + errors=$(( $errors + $? )) + + echo "Testing Tunnel mode..." + cleanup + setup + test_tun + errors=$(( $errors + $? )) + + return $errors +} + +trap cleanup EXIT + +run_tests + +if [ $? -ne 0 ]; then + echo -e "$(basename $0): ${RED}FAIL${NC}" + exit 1 +fi +echo -e "$(basename $0): ${GREEN}PASS${NC}" +exit 0 diff --git a/tools/testing/selftests/net/netfilter/lib.sh b/tools/testing/selftests/net/netfilter/lib.sh new file mode 100644 index 0000000000..bedd35298e --- /dev/null +++ b/tools/testing/selftests/net/netfilter/lib.sh @@ -0,0 +1,10 @@ +net_netfilter_dir=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")") + +source "$net_netfilter_dir/../lib.sh" + +checktool (){ + if ! $1 > /dev/null 2>&1; then + echo "SKIP: Could not $2" + exit $ksft_skip + fi +} diff --git a/tools/testing/selftests/net/netfilter/nf_conntrack_packetdrill.sh b/tools/testing/selftests/net/netfilter/nf_conntrack_packetdrill.sh new file mode 100755 index 0000000000..c6fdd2079f --- /dev/null +++ b/tools/testing/selftests/net/netfilter/nf_conntrack_packetdrill.sh @@ -0,0 +1,71 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +source lib.sh + +checktool "conntrack --version" "run test without conntrack" +checktool "iptables --version" "run test without iptables" +checktool "ip6tables --version" "run test without ip6tables" + +modprobe -q tun +modprobe -q nf_conntrack +# echo 1 > /proc/sys/net/netfilter/nf_log_all_netns + +PDRILL_TIMEOUT=10 + +files=" +conntrack_ack_loss_stall.pkt +conntrack_inexact_rst.pkt +conntrack_syn_challenge_ack.pkt +conntrack_synack_old.pkt +conntrack_synack_reuse.pkt +conntrack_rst_invalid.pkt +" + +if ! packetdrill --dry_run --verbose "packetdrill/conntrack_ack_loss_stall.pkt";then + echo "SKIP: packetdrill not installed" + exit ${ksft_skip} +fi + +ret=0 + +run_packetdrill() +{ + filename="$1" + ipver="$2" + local mtu=1500 + + export NFCT_IP_VERSION="$ipver" + + if [ "$ipver" = "ipv4" ];then + export xtables="iptables" + elif [ "$ipver" = "ipv6" ];then + export xtables="ip6tables" + mtu=1520 + fi + + timeout "$PDRILL_TIMEOUT" unshare -n packetdrill --ip_version="$ipver" --mtu=$mtu \ + --tolerance_usecs=1000000 --non_fatal packet "$filename" +} + +run_one_test_file() +{ + filename="$1" + + for v in ipv4 ipv6;do + printf "%-50s(%s)%-20s" "$filename" "$v" "" + if run_packetdrill packetdrill/"$f" "$v";then + echo OK + else + echo FAIL + ret=1 + fi + done +} + +echo "Replaying packetdrill test cases:" +for f in $files;do + run_one_test_file packetdrill/"$f" +done + +exit $ret diff --git a/tools/testing/selftests/net/netfilter/nf_nat_edemux.sh b/tools/testing/selftests/net/netfilter/nf_nat_edemux.sh new file mode 100755 index 0000000000..1014551dd7 --- /dev/null +++ b/tools/testing/selftests/net/netfilter/nf_nat_edemux.sh @@ -0,0 +1,97 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test NAT source port clash resolution +# + +source lib.sh +ret=0 +socatpid=0 + +cleanup() +{ + [ "$socatpid" -gt 0 ] && kill "$socatpid" + + cleanup_all_ns +} + +checktool "socat -h" "run test without socat" +checktool "iptables --version" "run test without iptables" + +trap cleanup EXIT + +setup_ns ns1 ns2 + +# Connect the namespaces using a veth pair +ip link add name veth2 type veth peer name veth1 +ip link set netns "$ns1" dev veth1 +ip link set netns "$ns2" dev veth2 + +ip netns exec "$ns1" ip link set up dev lo +ip netns exec "$ns1" ip link set up dev veth1 +ip netns exec "$ns1" ip addr add 192.168.1.1/24 dev veth1 + +ip netns exec "$ns2" ip link set up dev lo +ip netns exec "$ns2" ip link set up dev veth2 +ip netns exec "$ns2" ip addr add 192.168.1.2/24 dev veth2 + +# Create a server in one namespace +ip netns exec "$ns1" socat -u TCP-LISTEN:5201,fork OPEN:/dev/null,wronly=1 & +socatpid=$! + +# Restrict source port to just one so we don't have to exhaust +# all others. +ip netns exec "$ns2" sysctl -q net.ipv4.ip_local_port_range="10000 10000" + +# add a virtual IP using DNAT +ip netns exec "$ns2" iptables -t nat -A OUTPUT -d 10.96.0.1/32 -p tcp --dport 443 -j DNAT --to-destination 192.168.1.1:5201 + +# ... and route it to the other namespace +ip netns exec "$ns2" ip route add 10.96.0.1 via 192.168.1.1 + +# add a persistent connection from the other namespace +ip netns exec "$ns2" socat -t 10 - TCP:192.168.1.1:5201 > /dev/null & + +sleep 1 + +# ip daddr:dport will be rewritten to 192.168.1.1 5201 +# NAT must reallocate source port 10000 because +# 192.168.1.2:10000 -> 192.168.1.1:5201 is already in use +echo test | ip netns exec "$ns2" socat -t 3 -u STDIN TCP:10.96.0.1:443,connect-timeout=3 >/dev/null +ret=$? + +# Check socat can connect to 10.96.0.1:443 (aka 192.168.1.1:5201). +if [ $ret -eq 0 ]; then + echo "PASS: socat can connect via NAT'd address" +else + echo "FAIL: socat cannot connect via NAT'd address" +fi + +# check sport clashres. +ip netns exec "$ns1" iptables -t nat -A PREROUTING -p tcp --dport 5202 -j REDIRECT --to-ports 5201 +ip netns exec "$ns1" iptables -t nat -A PREROUTING -p tcp --dport 5203 -j REDIRECT --to-ports 5201 + +sleep 5 | ip netns exec "$ns2" socat -t 5 -u STDIN TCP:192.168.1.1:5202,connect-timeout=5 >/dev/null & + +# if connect succeeds, client closes instantly due to EOF on stdin. +# if connect hangs, it will time out after 5s. +echo | ip netns exec "$ns2" socat -t 3 -u STDIN TCP:192.168.1.1:5203,connect-timeout=5 >/dev/null & +cpid2=$! + +time_then=$(date +%s) +wait $cpid2 +rv=$? +time_now=$(date +%s) + +# Check how much time has elapsed, expectation is for +# 'cpid2' to connect and then exit (and no connect delay). +delta=$((time_now - time_then)) + +if [ $delta -lt 2 ] && [ $rv -eq 0 ]; then + echo "PASS: could connect to service via redirected ports" +else + echo "FAIL: socat cannot connect to service via redirect ($delta seconds elapsed, returned $rv)" + ret=1 +fi + +exit $ret diff --git a/tools/testing/selftests/net/netfilter/nf_queue.c b/tools/testing/selftests/net/netfilter/nf_queue.c new file mode 100644 index 0000000000..9e56b9d470 --- /dev/null +++ b/tools/testing/selftests/net/netfilter/nf_queue.c @@ -0,0 +1,395 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <errno.h> +#include <stdbool.h> +#include <stdio.h> +#include <stdint.h> +#include <stdlib.h> +#include <unistd.h> +#include <string.h> +#include <time.h> +#include <arpa/inet.h> + +#include <libmnl/libmnl.h> +#include <linux/netfilter.h> +#include <linux/netfilter/nfnetlink.h> +#include <linux/netfilter/nfnetlink_queue.h> + +struct options { + bool count_packets; + bool gso_enabled; + int verbose; + unsigned int queue_num; + unsigned int timeout; + uint32_t verdict; + uint32_t delay_ms; +}; + +static unsigned int queue_stats[5]; +static struct options opts; + +static void help(const char *p) +{ + printf("Usage: %s [-c|-v [-vv] ] [-t timeout] [-q queue_num] [-Qdst_queue ] [ -d ms_delay ] [-G]\n", p); +} + +static int parse_attr_cb(const struct nlattr *attr, void *data) +{ + const struct nlattr **tb = data; + int type = mnl_attr_get_type(attr); + + /* skip unsupported attribute in user-space */ + if (mnl_attr_type_valid(attr, NFQA_MAX) < 0) + return MNL_CB_OK; + + switch (type) { + case NFQA_MARK: + case NFQA_IFINDEX_INDEV: + case NFQA_IFINDEX_OUTDEV: + case NFQA_IFINDEX_PHYSINDEV: + case NFQA_IFINDEX_PHYSOUTDEV: + if (mnl_attr_validate(attr, MNL_TYPE_U32) < 0) { + perror("mnl_attr_validate"); + return MNL_CB_ERROR; + } + break; + case NFQA_TIMESTAMP: + if (mnl_attr_validate2(attr, MNL_TYPE_UNSPEC, + sizeof(struct nfqnl_msg_packet_timestamp)) < 0) { + perror("mnl_attr_validate2"); + return MNL_CB_ERROR; + } + break; + case NFQA_HWADDR: + if (mnl_attr_validate2(attr, MNL_TYPE_UNSPEC, + sizeof(struct nfqnl_msg_packet_hw)) < 0) { + perror("mnl_attr_validate2"); + return MNL_CB_ERROR; + } + break; + case NFQA_PAYLOAD: + break; + } + tb[type] = attr; + return MNL_CB_OK; +} + +static int queue_cb(const struct nlmsghdr *nlh, void *data) +{ + struct nlattr *tb[NFQA_MAX+1] = { 0 }; + struct nfqnl_msg_packet_hdr *ph = NULL; + uint32_t id = 0; + + (void)data; + + mnl_attr_parse(nlh, sizeof(struct nfgenmsg), parse_attr_cb, tb); + if (tb[NFQA_PACKET_HDR]) { + ph = mnl_attr_get_payload(tb[NFQA_PACKET_HDR]); + id = ntohl(ph->packet_id); + + if (opts.verbose > 0) + printf("packet hook=%u, hwproto 0x%x", + ntohs(ph->hw_protocol), ph->hook); + + if (ph->hook >= 5) { + fprintf(stderr, "Unknown hook %d\n", ph->hook); + return MNL_CB_ERROR; + } + + if (opts.verbose > 0) { + uint32_t skbinfo = 0; + + if (tb[NFQA_SKB_INFO]) + skbinfo = ntohl(mnl_attr_get_u32(tb[NFQA_SKB_INFO])); + if (skbinfo & NFQA_SKB_CSUMNOTREADY) + printf(" csumnotready"); + if (skbinfo & NFQA_SKB_GSO) + printf(" gso"); + if (skbinfo & NFQA_SKB_CSUM_NOTVERIFIED) + printf(" csumnotverified"); + puts(""); + } + + if (opts.count_packets) + queue_stats[ph->hook]++; + } + + return MNL_CB_OK + id; +} + +static struct nlmsghdr * +nfq_build_cfg_request(char *buf, uint8_t command, int queue_num) +{ + struct nlmsghdr *nlh = mnl_nlmsg_put_header(buf); + struct nfqnl_msg_config_cmd cmd = { + .command = command, + .pf = htons(AF_INET), + }; + struct nfgenmsg *nfg; + + nlh->nlmsg_type = (NFNL_SUBSYS_QUEUE << 8) | NFQNL_MSG_CONFIG; + nlh->nlmsg_flags = NLM_F_REQUEST; + + nfg = mnl_nlmsg_put_extra_header(nlh, sizeof(*nfg)); + + nfg->nfgen_family = AF_UNSPEC; + nfg->version = NFNETLINK_V0; + nfg->res_id = htons(queue_num); + + mnl_attr_put(nlh, NFQA_CFG_CMD, sizeof(cmd), &cmd); + + return nlh; +} + +static struct nlmsghdr * +nfq_build_cfg_params(char *buf, uint8_t mode, int range, int queue_num) +{ + struct nlmsghdr *nlh = mnl_nlmsg_put_header(buf); + struct nfqnl_msg_config_params params = { + .copy_range = htonl(range), + .copy_mode = mode, + }; + struct nfgenmsg *nfg; + + nlh->nlmsg_type = (NFNL_SUBSYS_QUEUE << 8) | NFQNL_MSG_CONFIG; + nlh->nlmsg_flags = NLM_F_REQUEST; + + nfg = mnl_nlmsg_put_extra_header(nlh, sizeof(*nfg)); + nfg->nfgen_family = AF_UNSPEC; + nfg->version = NFNETLINK_V0; + nfg->res_id = htons(queue_num); + + mnl_attr_put(nlh, NFQA_CFG_PARAMS, sizeof(params), ¶ms); + + return nlh; +} + +static struct nlmsghdr * +nfq_build_verdict(char *buf, int id, int queue_num, uint32_t verd) +{ + struct nfqnl_msg_verdict_hdr vh = { + .verdict = htonl(verd), + .id = htonl(id), + }; + struct nlmsghdr *nlh; + struct nfgenmsg *nfg; + + nlh = mnl_nlmsg_put_header(buf); + nlh->nlmsg_type = (NFNL_SUBSYS_QUEUE << 8) | NFQNL_MSG_VERDICT; + nlh->nlmsg_flags = NLM_F_REQUEST; + nfg = mnl_nlmsg_put_extra_header(nlh, sizeof(*nfg)); + nfg->nfgen_family = AF_UNSPEC; + nfg->version = NFNETLINK_V0; + nfg->res_id = htons(queue_num); + + mnl_attr_put(nlh, NFQA_VERDICT_HDR, sizeof(vh), &vh); + + return nlh; +} + +static void print_stats(void) +{ + unsigned int last, total; + int i; + + total = 0; + last = queue_stats[0]; + + for (i = 0; i < 5; i++) { + printf("hook %d packets %08u\n", i, queue_stats[i]); + last = queue_stats[i]; + total += last; + } + + printf("%u packets total\n", total); +} + +struct mnl_socket *open_queue(void) +{ + char buf[MNL_SOCKET_BUFFER_SIZE]; + unsigned int queue_num; + struct mnl_socket *nl; + struct nlmsghdr *nlh; + struct timeval tv; + uint32_t flags; + + nl = mnl_socket_open(NETLINK_NETFILTER); + if (nl == NULL) { + perror("mnl_socket_open"); + exit(EXIT_FAILURE); + } + + if (mnl_socket_bind(nl, 0, MNL_SOCKET_AUTOPID) < 0) { + perror("mnl_socket_bind"); + exit(EXIT_FAILURE); + } + + queue_num = opts.queue_num; + nlh = nfq_build_cfg_request(buf, NFQNL_CFG_CMD_BIND, queue_num); + + if (mnl_socket_sendto(nl, nlh, nlh->nlmsg_len) < 0) { + perror("mnl_socket_sendto"); + exit(EXIT_FAILURE); + } + + nlh = nfq_build_cfg_params(buf, NFQNL_COPY_PACKET, 0xFFFF, queue_num); + + flags = opts.gso_enabled ? NFQA_CFG_F_GSO : 0; + flags |= NFQA_CFG_F_UID_GID; + mnl_attr_put_u32(nlh, NFQA_CFG_FLAGS, htonl(flags)); + mnl_attr_put_u32(nlh, NFQA_CFG_MASK, htonl(flags)); + + if (mnl_socket_sendto(nl, nlh, nlh->nlmsg_len) < 0) { + perror("mnl_socket_sendto"); + exit(EXIT_FAILURE); + } + + memset(&tv, 0, sizeof(tv)); + tv.tv_sec = opts.timeout; + if (opts.timeout && setsockopt(mnl_socket_get_fd(nl), + SOL_SOCKET, SO_RCVTIMEO, + &tv, sizeof(tv))) { + perror("setsockopt(SO_RCVTIMEO)"); + exit(EXIT_FAILURE); + } + + return nl; +} + +static void sleep_ms(uint32_t delay) +{ + struct timespec ts = { .tv_sec = delay / 1000 }; + + delay %= 1000; + + ts.tv_nsec = delay * 1000llu * 1000llu; + + nanosleep(&ts, NULL); +} + +static int mainloop(void) +{ + unsigned int buflen = 64 * 1024 + MNL_SOCKET_BUFFER_SIZE; + struct mnl_socket *nl; + struct nlmsghdr *nlh; + unsigned int portid; + char *buf; + int ret; + + buf = malloc(buflen); + if (!buf) { + perror("malloc"); + exit(EXIT_FAILURE); + } + + nl = open_queue(); + portid = mnl_socket_get_portid(nl); + + for (;;) { + uint32_t id; + + ret = mnl_socket_recvfrom(nl, buf, buflen); + if (ret == -1) { + if (errno == ENOBUFS || errno == EINTR) + continue; + + if (errno == EAGAIN) { + errno = 0; + ret = 0; + break; + } + + perror("mnl_socket_recvfrom"); + exit(EXIT_FAILURE); + } + + ret = mnl_cb_run(buf, ret, 0, portid, queue_cb, NULL); + if (ret < 0) { + perror("mnl_cb_run"); + exit(EXIT_FAILURE); + } + + id = ret - MNL_CB_OK; + if (opts.delay_ms) + sleep_ms(opts.delay_ms); + + nlh = nfq_build_verdict(buf, id, opts.queue_num, opts.verdict); + if (mnl_socket_sendto(nl, nlh, nlh->nlmsg_len) < 0) { + perror("mnl_socket_sendto"); + exit(EXIT_FAILURE); + } + } + + mnl_socket_close(nl); + + return ret; +} + +static void parse_opts(int argc, char **argv) +{ + int c; + + while ((c = getopt(argc, argv, "chvt:q:Q:d:G")) != -1) { + switch (c) { + case 'c': + opts.count_packets = true; + break; + case 'h': + help(argv[0]); + exit(0); + break; + case 'q': + opts.queue_num = atoi(optarg); + if (opts.queue_num > 0xffff) + opts.queue_num = 0; + break; + case 'Q': + opts.verdict = atoi(optarg); + if (opts.verdict > 0xffff) { + fprintf(stderr, "Expected destination queue number\n"); + exit(1); + } + + opts.verdict <<= 16; + opts.verdict |= NF_QUEUE; + break; + case 'd': + opts.delay_ms = atoi(optarg); + if (opts.delay_ms == 0) { + fprintf(stderr, "Expected nonzero delay (in milliseconds)\n"); + exit(1); + } + break; + case 't': + opts.timeout = atoi(optarg); + break; + case 'G': + opts.gso_enabled = false; + break; + case 'v': + opts.verbose++; + break; + } + } + + if (opts.verdict != NF_ACCEPT && (opts.verdict >> 16 == opts.queue_num)) { + fprintf(stderr, "Cannot use same destination and source queue\n"); + exit(1); + } +} + +int main(int argc, char *argv[]) +{ + int ret; + + opts.verdict = NF_ACCEPT; + opts.gso_enabled = true; + + parse_opts(argc, argv); + + ret = mainloop(); + if (opts.count_packets) + print_stats(); + + return ret; +} diff --git a/tools/testing/selftests/net/netfilter/nft_audit.sh b/tools/testing/selftests/net/netfilter/nft_audit.sh new file mode 100755 index 0000000000..902f8114bc --- /dev/null +++ b/tools/testing/selftests/net/netfilter/nft_audit.sh @@ -0,0 +1,268 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Check that audit logs generated for nft commands are as expected. + +SKIP_RC=4 +RC=0 + +if [ -r /var/run/auditd.pid ];then + read pid < /var/run/auditd.pid + p=$(pgrep ^auditd$) + + if [ "$pid" -eq "$p" ]; then + echo "SKIP: auditd is running" + exit $SKIP_RC + fi +fi + +nft --version >/dev/null 2>&1 || { + echo "SKIP: missing nft tool" + exit $SKIP_RC +} + +# nft must be recent enough to support "reset" keyword. +nft --check -f /dev/stdin >/dev/null 2>&1 <<EOF +add table t +add chain t c +reset rules t c +EOF + +if [ "$?" -ne 0 ];then + echo -n "SKIP: nft reset feature test failed: " + nft --version + exit $SKIP_RC +fi + +# Run everything in a separate network namespace +[ "${1}" != "run" ] && { unshare -n "${0}" run; exit $?; } + +# give other scripts a chance to finish - audit_logread sees all activity +sleep 1 + +logfile=$(mktemp) +rulefile=$(mktemp) +echo "logging into $logfile" +./audit_logread >"$logfile" & +logread_pid=$! +trap 'kill $logread_pid; rm -f $logfile $rulefile' EXIT +exec 3<"$logfile" + +do_test() { # (cmd, log) + echo -n "testing for cmd: $1 ... " + cat <&3 >/dev/null + $1 >/dev/null || exit 1 + sleep 0.1 + res=$(diff -a -u <(echo "$2") - <&3) + [ $? -eq 0 ] && { echo "OK"; return; } + echo "FAIL" + grep -v '^\(---\|+++\|@@\)' <<< "$res" + ((RC--)) +} + +nft flush ruleset + +# adding tables, chains and rules + +for table in t1 t2; do + do_test "nft add table $table" \ + "table=$table family=2 entries=1 op=nft_register_table" + + do_test "nft add chain $table c1" \ + "table=$table family=2 entries=1 op=nft_register_chain" + + do_test "nft add chain $table c2; add chain $table c3" \ + "table=$table family=2 entries=2 op=nft_register_chain" + + cmd="add rule $table c1 counter" + + do_test "nft $cmd" \ + "table=$table family=2 entries=1 op=nft_register_rule" + + do_test "nft $cmd; $cmd" \ + "table=$table family=2 entries=2 op=nft_register_rule" + + cmd="" + sep="" + for chain in c2 c3; do + for i in {1..3}; do + cmd+="$sep add rule $table $chain counter" + sep=";" + done + done + do_test "nft $cmd" \ + "table=$table family=2 entries=6 op=nft_register_rule" +done + +for ((i = 0; i < 500; i++)); do + echo "add rule t2 c3 counter accept comment \"rule $i\"" +done > "$rulefile" +do_test "nft -f $rulefile" \ +'table=t2 family=2 entries=500 op=nft_register_rule' + +# adding sets and elements + +settype='type inet_service; counter' +setelem='{ 22, 80, 443 }' +setblock="{ $settype; elements = $setelem; }" +do_test "nft add set t1 s $setblock" \ +"table=t1 family=2 entries=4 op=nft_register_set" + +do_test "nft add set t1 s2 $setblock; add set t1 s3 { $settype; }" \ +"table=t1 family=2 entries=5 op=nft_register_set" + +do_test "nft add element t1 s3 $setelem" \ +"table=t1 family=2 entries=3 op=nft_register_setelem" + +# adding counters + +do_test 'nft add counter t1 c1' \ +'table=t1 family=2 entries=1 op=nft_register_obj' + +do_test 'nft add counter t2 c1; add counter t2 c2' \ +'table=t2 family=2 entries=2 op=nft_register_obj' + +for ((i = 3; i <= 500; i++)); do + echo "add counter t2 c$i" +done > "$rulefile" +do_test "nft -f $rulefile" \ +'table=t2 family=2 entries=498 op=nft_register_obj' + +# adding/updating quotas + +do_test 'nft add quota t1 q1 { 10 bytes }' \ +'table=t1 family=2 entries=1 op=nft_register_obj' + +do_test 'nft add quota t2 q1 { 10 bytes }; add quota t2 q2 { 10 bytes }' \ +'table=t2 family=2 entries=2 op=nft_register_obj' + +for ((i = 3; i <= 500; i++)); do + echo "add quota t2 q$i { 10 bytes }" +done > "$rulefile" +do_test "nft -f $rulefile" \ +'table=t2 family=2 entries=498 op=nft_register_obj' + +# changing the quota value triggers obj update path +do_test 'nft add quota t1 q1 { 20 bytes }' \ +'table=t1 family=2 entries=1 op=nft_register_obj' + +# resetting rules + +do_test 'nft reset rules t1 c2' \ +'table=t1 family=2 entries=3 op=nft_reset_rule' + +do_test 'nft reset rules table t1' \ +'table=t1 family=2 entries=3 op=nft_reset_rule +table=t1 family=2 entries=3 op=nft_reset_rule +table=t1 family=2 entries=3 op=nft_reset_rule' + +do_test 'nft reset rules t2 c3' \ +'table=t2 family=2 entries=189 op=nft_reset_rule +table=t2 family=2 entries=188 op=nft_reset_rule +table=t2 family=2 entries=126 op=nft_reset_rule' + +do_test 'nft reset rules t2' \ +'table=t2 family=2 entries=3 op=nft_reset_rule +table=t2 family=2 entries=3 op=nft_reset_rule +table=t2 family=2 entries=186 op=nft_reset_rule +table=t2 family=2 entries=188 op=nft_reset_rule +table=t2 family=2 entries=129 op=nft_reset_rule' + +do_test 'nft reset rules' \ +'table=t1 family=2 entries=3 op=nft_reset_rule +table=t1 family=2 entries=3 op=nft_reset_rule +table=t1 family=2 entries=3 op=nft_reset_rule +table=t2 family=2 entries=3 op=nft_reset_rule +table=t2 family=2 entries=3 op=nft_reset_rule +table=t2 family=2 entries=180 op=nft_reset_rule +table=t2 family=2 entries=188 op=nft_reset_rule +table=t2 family=2 entries=135 op=nft_reset_rule' + +# resetting sets and elements + +elem=(22 ",80" ",443") +relem="" +for i in {1..3}; do + relem+="${elem[((i - 1))]}" + do_test "nft reset element t1 s { $relem }" \ + "table=t1 family=2 entries=$i op=nft_reset_setelem" +done + +do_test 'nft reset set t1 s' \ +'table=t1 family=2 entries=3 op=nft_reset_setelem' + +# resetting counters + +do_test 'nft reset counter t1 c1' \ +'table=t1 family=2 entries=1 op=nft_reset_obj' + +do_test 'nft reset counters t1' \ +'table=t1 family=2 entries=1 op=nft_reset_obj' + +do_test 'nft reset counters t2' \ +'table=t2 family=2 entries=342 op=nft_reset_obj +table=t2 family=2 entries=158 op=nft_reset_obj' + +do_test 'nft reset counters' \ +'table=t1 family=2 entries=1 op=nft_reset_obj +table=t2 family=2 entries=341 op=nft_reset_obj +table=t2 family=2 entries=159 op=nft_reset_obj' + +# resetting quotas + +do_test 'nft reset quota t1 q1' \ +'table=t1 family=2 entries=1 op=nft_reset_obj' + +do_test 'nft reset quotas t1' \ +'table=t1 family=2 entries=1 op=nft_reset_obj' + +do_test 'nft reset quotas t2' \ +'table=t2 family=2 entries=315 op=nft_reset_obj +table=t2 family=2 entries=185 op=nft_reset_obj' + +do_test 'nft reset quotas' \ +'table=t1 family=2 entries=1 op=nft_reset_obj +table=t2 family=2 entries=314 op=nft_reset_obj +table=t2 family=2 entries=186 op=nft_reset_obj' + +# deleting rules + +readarray -t handles < <(nft -a list chain t1 c1 | \ + sed -n 's/.*counter.* handle \(.*\)$/\1/p') + +do_test "nft delete rule t1 c1 handle ${handles[0]}" \ +'table=t1 family=2 entries=1 op=nft_unregister_rule' + +cmd='delete rule t1 c1 handle' +do_test "nft $cmd ${handles[1]}; $cmd ${handles[2]}" \ +'table=t1 family=2 entries=2 op=nft_unregister_rule' + +do_test 'nft flush chain t1 c2' \ +'table=t1 family=2 entries=3 op=nft_unregister_rule' + +do_test 'nft flush table t2' \ +'table=t2 family=2 entries=509 op=nft_unregister_rule' + +# deleting chains + +do_test 'nft delete chain t2 c2' \ +'table=t2 family=2 entries=1 op=nft_unregister_chain' + +# deleting sets and elements + +do_test 'nft delete element t1 s { 22 }' \ +'table=t1 family=2 entries=1 op=nft_unregister_setelem' + +do_test 'nft delete element t1 s { 80, 443 }' \ +'table=t1 family=2 entries=2 op=nft_unregister_setelem' + +do_test 'nft flush set t1 s2' \ +'table=t1 family=2 entries=3 op=nft_unregister_setelem' + +do_test 'nft delete set t1 s2' \ +'table=t1 family=2 entries=1 op=nft_unregister_set' + +do_test 'nft delete set t1 s3' \ +'table=t1 family=2 entries=1 op=nft_unregister_set' + +exit $RC diff --git a/tools/testing/selftests/net/netfilter/nft_concat_range.sh b/tools/testing/selftests/net/netfilter/nft_concat_range.sh new file mode 100755 index 0000000000..6d66240e14 --- /dev/null +++ b/tools/testing/selftests/net/netfilter/nft_concat_range.sh @@ -0,0 +1,1622 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# nft_concat_range.sh - Tests for sets with concatenation of ranged fields +# +# Copyright (c) 2019 Red Hat GmbH +# +# Author: Stefano Brivio <sbrivio@redhat.com> +# +# shellcheck disable=SC2154,SC2034,SC2016,SC2030,SC2031,SC2317 +# ^ Configuration and templates sourced with eval, counters reused in subshells + +source lib.sh + +# Available test groups: +# - reported_issues: check for issues that were reported in the past +# - correctness: check that packets match given entries, and only those +# - concurrency: attempt races between insertion, deletion and lookup +# - timeout: check that packets match entries until they expire +# - performance: estimate matching rate, compare with rbtree and hash baselines +TESTS="reported_issues correctness concurrency timeout" +[ -n "$NFT_CONCAT_RANGE_TESTS" ] && TESTS="${NFT_CONCAT_RANGE_TESTS}" + +# Set types, defined by TYPE_ variables below +TYPES="net_port port_net net6_port port_proto net6_port_mac net6_port_mac_proto + net_port_net net_mac mac_net net_mac_icmp net6_mac_icmp + net6_port_net6_port net_port_mac_proto_net" + +# Reported bugs, also described by TYPE_ variables below +BUGS="flush_remove_add reload" + +# List of possible paths to pktgen script from kernel tree for performance tests +PKTGEN_SCRIPT_PATHS=" + ../../../../../samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh + pktgen/pktgen_bench_xmit_mode_netif_receive.sh" + +# Definition of set types: +# display display text for test report +# type_spec nftables set type specifier +# chain_spec nftables type specifier for rules mapping to set +# dst call sequence of format_*() functions for destination fields +# src call sequence of format_*() functions for source fields +# start initial integer used to generate addresses and ports +# count count of entries to generate and match +# src_delta number summed to destination generator for source fields +# tools list of tools for correctness and timeout tests, any can be used +# proto L4 protocol of test packets +# +# race_repeat race attempts per thread, 0 disables concurrency test for type +# flood_tools list of tools for concurrency tests, any can be used +# flood_proto L4 protocol of test packets for concurrency tests +# flood_spec nftables type specifier for concurrency tests +# +# perf_duration duration of single pktgen injection test +# perf_spec nftables type specifier for performance tests +# perf_dst format_*() functions for destination fields in performance test +# perf_src format_*() functions for source fields in performance test +# perf_entries number of set entries for performance test +# perf_proto L3 protocol of test packets +TYPE_net_port=" +display net,port +type_spec ipv4_addr . inet_service +chain_spec ip daddr . udp dport +dst addr4 port +src +start 1 +count 5 +src_delta 2000 +tools sendip bash +proto udp + +race_repeat 3 +flood_tools iperf3 iperf netperf +flood_proto udp +flood_spec ip daddr . udp dport + +perf_duration 5 +perf_spec ip daddr . udp dport +perf_dst addr4 port +perf_src +perf_entries 1000 +perf_proto ipv4 +" + +TYPE_port_net=" +display port,net +type_spec inet_service . ipv4_addr +chain_spec udp dport . ip daddr +dst port addr4 +src +start 1 +count 5 +src_delta 2000 +tools sendip socat bash +proto udp + +race_repeat 3 +flood_tools iperf3 iperf netperf +flood_proto udp +flood_spec udp dport . ip daddr + +perf_duration 5 +perf_spec udp dport . ip daddr +perf_dst port addr4 +perf_src +perf_entries 100 +perf_proto ipv4 +" + +TYPE_net6_port=" +display net6,port +type_spec ipv6_addr . inet_service +chain_spec ip6 daddr . udp dport +dst addr6 port +src +start 10 +count 5 +src_delta 2000 +tools sendip socat bash +proto udp6 + +race_repeat 3 +flood_tools iperf3 iperf netperf +flood_proto tcp6 +flood_spec ip6 daddr . udp dport + +perf_duration 5 +perf_spec ip6 daddr . udp dport +perf_dst addr6 port +perf_src +perf_entries 1000 +perf_proto ipv6 +" + +TYPE_port_proto=" +display port,proto +type_spec inet_service . inet_proto +chain_spec udp dport . meta l4proto +dst port proto +src +start 1 +count 5 +src_delta 2000 +tools sendip socat bash +proto udp + +race_repeat 0 + +perf_duration 5 +perf_spec udp dport . meta l4proto +perf_dst port proto +perf_src +perf_entries 30000 +perf_proto ipv4 +" + +TYPE_net6_port_mac=" +display net6,port,mac +type_spec ipv6_addr . inet_service . ether_addr +chain_spec ip6 daddr . udp dport . ether saddr +dst addr6 port +src mac +start 10 +count 5 +src_delta 2000 +tools sendip socat bash +proto udp6 + +race_repeat 0 + +perf_duration 5 +perf_spec ip6 daddr . udp dport . ether daddr +perf_dst addr6 port mac +perf_src +perf_entries 10 +perf_proto ipv6 +" + +TYPE_net6_port_mac_proto=" +display net6,port,mac,proto +type_spec ipv6_addr . inet_service . ether_addr . inet_proto +chain_spec ip6 daddr . udp dport . ether saddr . meta l4proto +dst addr6 port +src mac proto +start 10 +count 5 +src_delta 2000 +tools sendip socat bash +proto udp6 + +race_repeat 0 + +perf_duration 5 +perf_spec ip6 daddr . udp dport . ether daddr . meta l4proto +perf_dst addr6 port mac proto +perf_src +perf_entries 1000 +perf_proto ipv6 +" + +TYPE_net_port_net=" +display net,port,net +type_spec ipv4_addr . inet_service . ipv4_addr +chain_spec ip daddr . udp dport . ip saddr +dst addr4 port +src addr4 +start 1 +count 5 +src_delta 2000 +tools sendip socat bash +proto udp + +race_repeat 3 +flood_tools iperf3 iperf netperf +flood_proto tcp +flood_spec ip daddr . udp dport . ip saddr + +perf_duration 0 +" + +TYPE_net6_port_net6_port=" +display net6,port,net6,port +type_spec ipv6_addr . inet_service . ipv6_addr . inet_service +chain_spec ip6 daddr . udp dport . ip6 saddr . udp sport +dst addr6 port +src addr6 port +start 10 +count 5 +src_delta 2000 +tools sendip socat +proto udp6 + +race_repeat 3 +flood_tools iperf3 iperf netperf +flood_proto tcp6 +flood_spec ip6 daddr . tcp dport . ip6 saddr . tcp sport + +perf_duration 0 +" + +TYPE_net_port_mac_proto_net=" +display net,port,mac,proto,net +type_spec ipv4_addr . inet_service . ether_addr . inet_proto . ipv4_addr +chain_spec ip daddr . udp dport . ether saddr . meta l4proto . ip saddr +dst addr4 port +src mac proto addr4 +start 1 +count 5 +src_delta 2000 +tools sendip socat bash +proto udp + +race_repeat 0 + +perf_duration 0 +" + +TYPE_net_mac=" +display net,mac +type_spec ipv4_addr . ether_addr +chain_spec ip daddr . ether saddr +dst addr4 +src mac +start 1 +count 5 +src_delta 2000 +tools sendip socat bash +proto udp + +race_repeat 0 + +perf_duration 5 +perf_spec ip daddr . ether daddr +perf_dst addr4 mac +perf_src +perf_entries 1000 +perf_proto ipv4 +" + +TYPE_mac_net=" +display mac,net +type_spec ether_addr . ipv4_addr +chain_spec ether saddr . ip saddr +dst +src mac addr4 +start 1 +count 5 +src_delta 2000 +tools sendip socat bash +proto udp + +race_repeat 0 + +perf_duration 0 +" + +TYPE_net_mac_icmp=" +display net,mac - ICMP +type_spec ipv4_addr . ether_addr +chain_spec ip daddr . ether saddr +dst addr4 +src mac +start 1 +count 5 +src_delta 2000 +tools ping +proto icmp + +race_repeat 0 + +perf_duration 0 +" + +TYPE_net6_mac_icmp=" +display net6,mac - ICMPv6 +type_spec ipv6_addr . ether_addr +chain_spec ip6 daddr . ether saddr +dst addr6 +src mac +start 10 +count 50 +src_delta 2000 +tools ping +proto icmp6 + +race_repeat 0 + +perf_duration 0 +" + +TYPE_net_port_proto_net=" +display net,port,proto,net +type_spec ipv4_addr . inet_service . inet_proto . ipv4_addr +chain_spec ip daddr . udp dport . meta l4proto . ip saddr +dst addr4 port proto +src addr4 +start 1 +count 5 +src_delta 2000 +tools sendip socat +proto udp + +race_repeat 3 +flood_tools iperf3 iperf netperf +flood_proto tcp +flood_spec ip daddr . tcp dport . meta l4proto . ip saddr + +perf_duration 0 +" + +# Definition of tests for bugs reported in the past: +# display display text for test report +TYPE_flush_remove_add=" +display Add two elements, flush, re-add +" + +TYPE_reload=" +display net,mac with reload +type_spec ipv4_addr . ether_addr +chain_spec ip daddr . ether saddr +dst addr4 +src mac +start 1 +count 1 +src_delta 2000 +tools sendip socat bash +proto udp + +race_repeat 0 + +perf_duration 0 +" + +# Set template for all tests, types and rules are filled in depending on test +set_template=' +flush ruleset + +table inet filter { + counter test { + packets 0 bytes 0 + } + + set test { + type ${type_spec} + flags interval,timeout + } + + chain input { + type filter hook prerouting priority 0; policy accept; + ${chain_spec} @test counter name \"test\" + } +} + +table netdev perf { + counter test { + packets 0 bytes 0 + } + + counter match { + packets 0 bytes 0 + } + + set test { + type ${type_spec} + flags interval + } + + set norange { + type ${type_spec} + } + + set noconcat { + type ${type_spec%% *} + flags interval + } + + chain test { + type filter hook ingress device veth_a priority 0; + } +} +' + +err_buf= +info_buf= + +# Append string to error buffer +err() { + err_buf="${err_buf}${1} +" +} + +# Append string to information buffer +info() { + info_buf="${info_buf}${1} +" +} + +# Flush error buffer to stdout +err_flush() { + printf "%s" "${err_buf}" + err_buf= +} + +# Flush information buffer to stdout +info_flush() { + printf "%s" "${info_buf}" + info_buf= +} + +# Setup veth pair: this namespace receives traffic, B generates it +setup_veth() { + ip netns add B + ip link add veth_a type veth peer name veth_b || return 1 + + ip link set veth_a up + ip link set veth_b netns B + + ip -n B link set veth_b up + + ip addr add dev veth_a 10.0.0.1 + ip route add default dev veth_a + + ip -6 addr add fe80::1/64 dev veth_a nodad + ip -6 addr add 2001:db8::1/64 dev veth_a nodad + ip -6 route add default dev veth_a + + ip -n B route add default dev veth_b + + ip -6 -n B addr add fe80::2/64 dev veth_b nodad + ip -6 -n B addr add 2001:db8::2/64 dev veth_b nodad + ip -6 -n B route add default dev veth_b + + B() { + ip netns exec B "$@" >/dev/null 2>&1 + } +} + +# Fill in set template and initialise set +setup_set() { + eval "echo \"${set_template}\"" | nft -f - +} + +# Check that at least one of the needed tools is available +check_tools() { + [ -z "${tools}" ] && return 0 + + __tools= + for tool in ${tools}; do + __tools="${__tools} ${tool}" + + command -v "${tool}" >/dev/null && return 0 + done + err "need one of:${__tools}, skipping" && return 1 +} + +# Set up function to send ICMP packets +setup_send_icmp() { + send_icmp() { + B ping -c1 -W1 "${dst_addr4}" >/dev/null 2>&1 + } +} + +# Set up function to send ICMPv6 packets +setup_send_icmp6() { + if command -v ping6 >/dev/null; then + send_icmp6() { + ip -6 addr add "${dst_addr6}" dev veth_a nodad \ + 2>/dev/null + B ping6 -q -c1 -W1 "${dst_addr6}" + } + else + send_icmp6() { + ip -6 addr add "${dst_addr6}" dev veth_a nodad \ + 2>/dev/null + B ping -q -6 -c1 -W1 "${dst_addr6}" + } + fi +} + +# Set up function to send single UDP packets on IPv4 +setup_send_udp() { + if command -v sendip >/dev/null; then + send_udp() { + [ -n "${src_port}" ] && src_port="-us ${src_port}" + [ -n "${dst_port}" ] && dst_port="-ud ${dst_port}" + [ -n "${src_addr4}" ] && src_addr4="-is ${src_addr4}" + + # shellcheck disable=SC2086 # sendip needs split options + B sendip -p ipv4 -p udp ${src_addr4} ${src_port} \ + ${dst_port} "${dst_addr4}" + + src_port= + dst_port= + src_addr4= + } + elif command -v socat -v >/dev/null; then + send_udp() { + if [ -n "${src_addr4}" ]; then + B ip addr add "${src_addr4}" dev veth_b + __socatbind=",bind=${src_addr4}" + if [ -n "${src_port}" ];then + __socatbind="${__socatbind}:${src_port}" + fi + fi + + ip addr add "${dst_addr4}" dev veth_a 2>/dev/null + [ -z "${dst_port}" ] && dst_port=12345 + + echo "test4" | B socat -t 0.01 STDIN UDP4-DATAGRAM:"$dst_addr4":"$dst_port""${__socatbind}" + + src_addr4= + src_port= + } + elif [ -z "$(bash -c 'type -p')" ]; then + send_udp() { + ip addr add "${dst_addr4}" dev veth_a 2>/dev/null + if [ -n "${src_addr4}" ]; then + B ip addr add "${src_addr4}/16" dev veth_b + B ip route add default dev veth_b + fi + + B bash -c "echo > /dev/udp/${dst_addr4}/${dst_port}" + + if [ -n "${src_addr4}" ]; then + B ip addr del "${src_addr4}/16" dev veth_b + fi + src_addr4= + } + else + return 1 + fi +} + +# Set up function to send single UDP packets on IPv6 +setup_send_udp6() { + if command -v sendip >/dev/null; then + send_udp6() { + [ -n "${src_port}" ] && src_port="-us ${src_port}" + [ -n "${dst_port}" ] && dst_port="-ud ${dst_port}" + if [ -n "${src_addr6}" ]; then + src_addr6="-6s ${src_addr6}" + else + src_addr6="-6s 2001:db8::2" + fi + ip -6 addr add "${dst_addr6}" dev veth_a nodad \ + 2>/dev/null + + # shellcheck disable=SC2086 # this needs split options + B sendip -p ipv6 -p udp ${src_addr6} ${src_port} \ + ${dst_port} "${dst_addr6}" + + src_port= + dst_port= + src_addr6= + } + elif command -v socat -v >/dev/null; then + send_udp6() { + ip -6 addr add "${dst_addr6}" dev veth_a nodad \ + 2>/dev/null + + __socatbind6= + + if [ -n "${src_addr6}" ]; then + B ip addr add "${src_addr6}" dev veth_b nodad + + __socatbind6=",bind=[${src_addr6}]" + + if [ -n "${src_port}" ] ;then + __socatbind6="${__socatbind6}:${src_port}" + fi + fi + + echo "test6" | B socat -t 0.01 STDIN UDP6-DATAGRAM:["$dst_addr6"]:"$dst_port""${__socatbind6}" + } + elif [ -z "$(bash -c 'type -p')" ]; then + send_udp6() { + ip -6 addr add "${dst_addr6}" dev veth_a nodad \ + 2>/dev/null + B ip addr add "${src_addr6}" dev veth_b nodad + B bash -c "echo > /dev/udp/${dst_addr6}/${dst_port}" + ip -6 addr del "${dst_addr6}" dev veth_a 2>/dev/null + } + else + return 1 + fi +} + +listener_ready() +{ + port="$1" + ss -lnt -o "sport = :$port" | grep -q "$port" +} + +# Set up function to send TCP traffic on IPv4 +setup_flood_tcp() { + if command -v iperf3 >/dev/null; then + flood_tcp() { + local n_port="${dst_port}" + [ -n "${dst_port}" ] && dst_port="-p ${dst_port}" + if [ -n "${src_addr4}" ]; then + B ip addr add "${src_addr4}/16" dev veth_b + src_addr4="-B ${src_addr4}" + else + B ip addr add dev veth_b 10.0.0.2 + src_addr4="-B 10.0.0.2" + fi + if [ -n "${src_port}" ]; then + src_port="--cport ${src_port}" + fi + B ip route add default dev veth_b 2>/dev/null + ip addr add "${dst_addr4}" dev veth_a 2>/dev/null + + # shellcheck disable=SC2086 # this needs split options + iperf3 -s -DB "${dst_addr4}" ${dst_port} >/dev/null 2>&1 + busywait "$BUSYWAIT_TIMEOUT" listener_ready "$n_port" + + # shellcheck disable=SC2086 # this needs split options + B iperf3 -c "${dst_addr4}" ${dst_port} ${src_port} \ + ${src_addr4} -l16 -t 1000 + + src_addr4= + src_port= + dst_port= + } + elif command -v iperf >/dev/null; then + flood_tcp() { + local n_port="${dst_port}" + [ -n "${dst_port}" ] && dst_port="-p ${dst_port}" + if [ -n "${src_addr4}" ]; then + B ip addr add "${src_addr4}/16" dev veth_b + src_addr4="-B ${src_addr4}" + else + B ip addr add dev veth_b 10.0.0.2 2>/dev/null + src_addr4="-B 10.0.0.2" + fi + if [ -n "${src_port}" ]; then + src_addr4="${src_addr4}:${src_port}" + fi + B ip route add default dev veth_b + ip addr add "${dst_addr4}" dev veth_a 2>/dev/null + + # shellcheck disable=SC2086 # this needs split options + iperf -s -DB "${dst_addr4}" ${dst_port} >/dev/null 2>&1 + busywait "$BUSYWAIT_TIMEOUT" listener_ready "$n_port" + + # shellcheck disable=SC2086 # this needs split options + B iperf -c "${dst_addr4}" ${dst_port} ${src_addr4} \ + -l20 -t 1000 + + src_addr4= + src_port= + dst_port= + } + elif command -v netperf >/dev/null; then + flood_tcp() { + local n_port="${dst_port}" + [ -n "${dst_port}" ] && dst_port="-p ${dst_port}" + if [ -n "${src_addr4}" ]; then + B ip addr add "${src_addr4}/16" dev veth_b + else + B ip addr add dev veth_b 10.0.0.2 + src_addr4="10.0.0.2" + fi + if [ -n "${src_port}" ]; then + dst_port="${dst_port},${src_port}" + fi + B ip route add default dev veth_b + ip addr add "${dst_addr4}" dev veth_a 2>/dev/null + + # shellcheck disable=SC2086 # this needs split options + netserver -4 ${dst_port} -L "${dst_addr4}" \ + >/dev/null 2>&1 + busywait "$BUSYWAIT_TIMEOUT" listener_ready "${n_port}" + + # shellcheck disable=SC2086 # this needs split options + B netperf -4 -H "${dst_addr4}" ${dst_port} \ + -L "${src_addr4}" -l 1000 -t TCP_STREAM + + src_addr4= + src_port= + dst_port= + } + else + return 1 + fi +} + +# Set up function to send TCP traffic on IPv6 +setup_flood_tcp6() { + if command -v iperf3 >/dev/null; then + flood_tcp6() { + local n_port="${dst_port}" + [ -n "${dst_port}" ] && dst_port="-p ${dst_port}" + if [ -n "${src_addr6}" ]; then + B ip addr add "${src_addr6}" dev veth_b nodad + src_addr6="-B ${src_addr6}" + else + src_addr6="-B 2001:db8::2" + fi + if [ -n "${src_port}" ]; then + src_port="--cport ${src_port}" + fi + B ip route add default dev veth_b + ip -6 addr add "${dst_addr6}" dev veth_a nodad \ + 2>/dev/null + + # shellcheck disable=SC2086 # this needs split options + iperf3 -s -DB "${dst_addr6}" ${dst_port} >/dev/null 2>&1 + busywait "$BUSYWAIT_TIMEOUT" listener_ready "${n_port}" + + # shellcheck disable=SC2086 # this needs split options + B iperf3 -c "${dst_addr6}" ${dst_port} \ + ${src_port} ${src_addr6} -l16 -t 1000 + + src_addr6= + src_port= + dst_port= + } + elif command -v iperf >/dev/null; then + flood_tcp6() { + local n_port="${dst_port}" + [ -n "${dst_port}" ] && dst_port="-p ${dst_port}" + if [ -n "${src_addr6}" ]; then + B ip addr add "${src_addr6}" dev veth_b nodad + src_addr6="-B ${src_addr6}" + else + src_addr6="-B 2001:db8::2" + fi + if [ -n "${src_port}" ]; then + src_addr6="${src_addr6}:${src_port}" + fi + B ip route add default dev veth_b + ip -6 addr add "${dst_addr6}" dev veth_a nodad \ + 2>/dev/null + + # shellcheck disable=SC2086 # this needs split options + iperf -s -VDB "${dst_addr6}" ${dst_port} >/dev/null 2>&1 + busywait "$BUSYWAIT_TIMEOUT" listener_ready "$n_port" + + # shellcheck disable=SC2086 # this needs split options + B iperf -c "${dst_addr6}" -V ${dst_port} \ + ${src_addr6} -l1 -t 1000 + + src_addr6= + src_port= + dst_port= + } + elif command -v netperf >/dev/null; then + flood_tcp6() { + local n_port="${dst_port}" + [ -n "${dst_port}" ] && dst_port="-p ${dst_port}" + if [ -n "${src_addr6}" ]; then + B ip addr add "${src_addr6}" dev veth_b nodad + else + src_addr6="2001:db8::2" + fi + if [ -n "${src_port}" ]; then + dst_port="${dst_port},${src_port}" + fi + B ip route add default dev veth_b + ip -6 addr add "${dst_addr6}" dev veth_a nodad \ + 2>/dev/null + + # shellcheck disable=SC2086 # this needs split options + netserver -6 ${dst_port} -L "${dst_addr6}" \ + >/dev/null 2>&1 + busywait "$BUSYWAIT_TIMEOUT" listener_ready "$n_port" + + # shellcheck disable=SC2086 # this needs split options + B netperf -6 -H "${dst_addr6}" ${dst_port} \ + -L "${src_addr6}" -l 1000 -t TCP_STREAM + + src_addr6= + src_port= + dst_port= + } + else + return 1 + fi +} + +# Set up function to send UDP traffic on IPv4 +setup_flood_udp() { + if command -v iperf3 >/dev/null; then + flood_udp() { + local n_port="${dst_port}" + [ -n "${dst_port}" ] && dst_port="-p ${dst_port}" + if [ -n "${src_addr4}" ]; then + B ip addr add "${src_addr4}/16" dev veth_b + src_addr4="-B ${src_addr4}" + else + B ip addr add dev veth_b 10.0.0.2 2>/dev/null + src_addr4="-B 10.0.0.2" + fi + if [ -n "${src_port}" ]; then + src_port="--cport ${src_port}" + fi + B ip route add default dev veth_b + ip addr add "${dst_addr4}" dev veth_a 2>/dev/null + + # shellcheck disable=SC2086 # this needs split options + iperf3 -s -DB "${dst_addr4}" ${dst_port} + busywait "$BUSYWAIT_TIMEOUT" listener_ready "$n_port" + + # shellcheck disable=SC2086 # this needs split options + B iperf3 -u -c "${dst_addr4}" -Z -b 100M -l16 -t1000 \ + ${dst_port} ${src_port} ${src_addr4} + + src_addr4= + src_port= + dst_port= + } + elif command -v iperf >/dev/null; then + flood_udp() { + local n_port="${dst_port}" + [ -n "${dst_port}" ] && dst_port="-p ${dst_port}" + if [ -n "${src_addr4}" ]; then + B ip addr add "${src_addr4}/16" dev veth_b + src_addr4="-B ${src_addr4}" + else + B ip addr add dev veth_b 10.0.0.2 + src_addr4="-B 10.0.0.2" + fi + if [ -n "${src_port}" ]; then + src_addr4="${src_addr4}:${src_port}" + fi + B ip route add default dev veth_b + ip addr add "${dst_addr4}" dev veth_a 2>/dev/null + + # shellcheck disable=SC2086 # this needs split options + iperf -u -sDB "${dst_addr4}" ${dst_port} >/dev/null 2>&1 + busywait "$BUSYWAIT_TIMEOUT" listener_ready "$n_port" + + # shellcheck disable=SC2086 # this needs split options + B iperf -u -c "${dst_addr4}" -b 100M -l1 -t1000 \ + ${dst_port} ${src_addr4} + + src_addr4= + src_port= + dst_port= + } + elif command -v netperf >/dev/null; then + flood_udp() { + local n_port="${dst_port}" + [ -n "${dst_port}" ] && dst_port="-p ${dst_port}" + if [ -n "${src_addr4}" ]; then + B ip addr add "${src_addr4}/16" dev veth_b + else + B ip addr add dev veth_b 10.0.0.2 + src_addr4="10.0.0.2" + fi + if [ -n "${src_port}" ]; then + dst_port="${dst_port},${src_port}" + fi + B ip route add default dev veth_b + ip addr add "${dst_addr4}" dev veth_a 2>/dev/null + + # shellcheck disable=SC2086 # this needs split options + netserver -4 ${dst_port} -L "${dst_addr4}" \ + >/dev/null 2>&1 + busywait "$BUSYWAIT_TIMEOUT" listener_ready "$n_port" + + # shellcheck disable=SC2086 # this needs split options + B netperf -4 -H "${dst_addr4}" ${dst_port} \ + -L "${src_addr4}" -l 1000 -t UDP_STREAM + + src_addr4= + src_port= + dst_port= + } + else + return 1 + fi +} + +# Find pktgen script and set up function to start pktgen injection +setup_perf() { + for pktgen_script_path in ${PKTGEN_SCRIPT_PATHS} __notfound; do + command -v "${pktgen_script_path}" >/dev/null && break + done + [ "${pktgen_script_path}" = "__notfound" ] && return 1 + + perf_ipv4() { + ${pktgen_script_path} -s80 \ + -i veth_a -d "${dst_addr4}" -p "${dst_port}" \ + -m "${dst_mac}" \ + -t $(($(nproc) / 5 + 1)) -b10000 -n0 2>/dev/null & + perf_pid=$! + } + perf_ipv6() { + IP6=6 ${pktgen_script_path} -s100 \ + -i veth_a -d "${dst_addr6}" -p "${dst_port}" \ + -m "${dst_mac}" \ + -t $(($(nproc) / 5 + 1)) -b10000 -n0 2>/dev/null & + perf_pid=$! + } +} + +# Clean up before each test +cleanup() { + nft reset counter inet filter test >/dev/null 2>&1 + nft flush ruleset >/dev/null 2>&1 + ip link del dummy0 2>/dev/null + ip route del default 2>/dev/null + ip -6 route del default 2>/dev/null + ip netns pids B 2>/dev/null | xargs kill 2>/dev/null + ip netns del B 2>/dev/null + ip link del veth_a 2>/dev/null + timeout= + killall iperf3 2>/dev/null + killall iperf 2>/dev/null + killall netperf 2>/dev/null + killall netserver 2>/dev/null +} + +cleanup_exit() { + cleanup + rm -f "$tmp" +} + +# Entry point for setup functions +setup() { + if [ "$(id -u)" -ne 0 ]; then + echo " need to run as root" + exit ${ksft_skip} + fi + + cleanup + check_tools || return 1 + for arg do + if ! eval setup_"${arg}"; then + err " ${arg} not supported" + return 1 + fi + done +} + +# Format integer into IPv4 address, summing 10.0.0.5 (arbitrary) to it +format_addr4() { + a=$((${1} + 16777216 * 10 + 5)) + printf "%i.%i.%i.%i" \ + "$((a / 16777216))" "$((a % 16777216 / 65536))" \ + "$((a % 65536 / 256))" "$((a % 256))" +} + +# Format integer into IPv6 address, summing 2001:db8:: to it +format_addr6() { + printf "2001:db8::%04x:%04x" "$((${1} / 65536))" "$((${1} % 65536))" +} + +# Format integer into EUI-48 address, summing 00:01:00:00:00:00 to it +format_mac() { + printf "00:01:%02x:%02x:%02x:%02x" \ + "$((${1} / 16777216))" "$((${1} % 16777216 / 65536))" \ + "$((${1} % 65536 / 256))" "$((${1} % 256))" +} + +# Format integer into port, avoid 0 port +format_port() { + printf "%i" "$((${1} % 65534 + 1))" +} + +# Drop suffixed '6' from L4 protocol, if any +format_proto() { + printf "%s" "${proto}" | tr -d 6 +} + +# Format destination and source fields into nft concatenated type +format() { + __start= + __end= + __expr="{ " + + for f in ${dst}; do + [ "${__expr}" != "{ " ] && __expr="${__expr} . " + + __start="$(eval format_"${f}" "${start}")" + __end="$(eval format_"${f}" "${end}")" + + if [ "${f}" = "proto" ]; then + __expr="${__expr}${__start}" + else + __expr="${__expr}${__start}-${__end}" + fi + done + for f in ${src}; do + [ "${__expr}" != "{ " ] && __expr="${__expr} . " + + __start="$(eval format_"${f}" "${srcstart}")" + __end="$(eval format_"${f}" "${srcend}")" + + if [ "${f}" = "proto" ]; then + __expr="${__expr}${__start}" + else + __expr="${__expr}${__start}-${__end}" + fi + done + + if [ -n "${timeout}" ]; then + echo "${__expr} timeout ${timeout}s }" + else + echo "${__expr} }" + fi +} + +# Format destination and source fields into nft type, start element only +format_norange() { + __expr="{ " + + for f in ${dst}; do + [ "${__expr}" != "{ " ] && __expr="${__expr} . " + + __expr="${__expr}$(eval format_"${f}" "${start}")" + done + for f in ${src}; do + __expr="${__expr} . $(eval format_"${f}" "${start}")" + done + + echo "${__expr} }" +} + +# Format first destination field into nft type +format_noconcat() { + for f in ${dst}; do + __start="$(eval format_"${f}" "${start}")" + __end="$(eval format_"${f}" "${end}")" + + if [ "${f}" = "proto" ]; then + echo "{ ${__start} }" + else + echo "{ ${__start}-${__end} }" + fi + return + done +} + +# Add single entry to 'test' set in 'inet filter' table +add() { + if ! nft add element inet filter test "${1}"; then + err "Failed to add ${1} given ruleset:" + err "$(nft -a list ruleset)" + return 1 + fi +} + +# Format and output entries for sets in 'netdev perf' table +add_perf() { + if [ "${1}" = "test" ]; then + echo "add element netdev perf test $(format)" + elif [ "${1}" = "norange" ]; then + echo "add element netdev perf norange $(format_norange)" + elif [ "${1}" = "noconcat" ]; then + echo "add element netdev perf noconcat $(format_noconcat)" + fi +} + +# Add single entry to 'norange' set in 'netdev perf' table +add_perf_norange() { + if ! nft add element netdev perf norange "${1}"; then + err "Failed to add ${1} given ruleset:" + err "$(nft -a list ruleset)" + return 1 + fi +} + +# Add single entry to 'noconcat' set in 'netdev perf' table +add_perf_noconcat() { + if ! nft add element netdev perf noconcat "${1}"; then + err "Failed to add ${1} given ruleset:" + err "$(nft -a list ruleset)" + return 1 + fi +} + +# Delete single entry from set +del() { + if ! nft delete element inet filter test "${1}"; then + err "Failed to delete ${1} given ruleset:" + err "$(nft -a list ruleset)" + return 1 + fi +} + +# Return packet count from 'test' counter in 'inet filter' table +count_packets() { + found=0 + for token in $(nft list counter inet filter test); do + [ ${found} -eq 1 ] && echo "${token}" && return + [ "${token}" = "packets" ] && found=1 + done +} + +# Return packet count from 'test' counter in 'netdev perf' table +count_perf_packets() { + found=0 + for token in $(nft list counter netdev perf test); do + [ ${found} -eq 1 ] && echo "${token}" && return + [ "${token}" = "packets" ] && found=1 + done +} + +# Set MAC addresses, send traffic according to specifier +flood() { + ip link set veth_a address "$(format_mac "${1}")" + ip -n B link set veth_b address "$(format_mac "${2}")" + + for f in ${dst}; do + eval dst_"$f"=\$\(format_\$f "${1}"\) + done + for f in ${src}; do + eval src_"$f"=\$\(format_\$f "${2}"\) + done + eval flood_\$proto +} + +# Set MAC addresses, start pktgen injection +perf() { + dst_mac="$(format_mac "${1}")" + ip link set veth_a address "${dst_mac}" + + for f in ${dst}; do + eval dst_"$f"=\$\(format_\$f "${1}"\) + done + for f in ${src}; do + eval src_"$f"=\$\(format_\$f "${2}"\) + done + eval perf_\$perf_proto +} + +# Set MAC addresses, send single packet, check that it matches, reset counter +send_match() { + ip link set veth_a address "$(format_mac "${1}")" + ip -n B link set veth_b address "$(format_mac "${2}")" + + for f in ${dst}; do + eval dst_"$f"=\$\(format_\$f "${1}"\) + done + for f in ${src}; do + eval src_"$f"=\$\(format_\$f "${2}"\) + done + eval send_\$proto + if [ "$(count_packets)" != "1" ]; then + err "${proto} packet to:" + err " $(for f in ${dst}; do + eval format_\$f "${1}"; printf ' '; done)" + err "from:" + err " $(for f in ${src}; do + eval format_\$f "${2}"; printf ' '; done)" + err "should have matched ruleset:" + err "$(nft -a list ruleset)" + return 1 + fi + nft reset counter inet filter test >/dev/null +} + +# Set MAC addresses, send single packet, check that it doesn't match +send_nomatch() { + ip link set veth_a address "$(format_mac "${1}")" + ip -n B link set veth_b address "$(format_mac "${2}")" + + for f in ${dst}; do + eval dst_"$f"=\$\(format_\$f "${1}"\) + done + for f in ${src}; do + eval src_"$f"=\$\(format_\$f "${2}"\) + done + eval send_\$proto + if [ "$(count_packets)" != "0" ]; then + err "${proto} packet to:" + err " $(for f in ${dst}; do + eval format_\$f "${1}"; printf ' '; done)" + err "from:" + err " $(for f in ${src}; do + eval format_\$f "${2}"; printf ' '; done)" + err "should not have matched ruleset:" + err "$(nft -a list ruleset)" + return 1 + fi +} + +# Correctness test template: +# - add ranged element, check that packets match it +# - check that packets outside range don't match it +# - remove some elements, check that packets don't match anymore +test_correctness() { + setup veth send_"${proto}" set || return ${ksft_skip} + + range_size=1 + for i in $(seq "${start}" $((start + count))); do + end=$((start + range_size)) + + # Avoid negative or zero-sized port ranges + if [ $((end / 65534)) -gt $((start / 65534)) ]; then + start=${end} + end=$((end + 1)) + fi + srcstart=$((start + src_delta)) + srcend=$((end + src_delta)) + + add "$(format)" || return 1 + for j in $(seq "$start" $((range_size / 2 + 1)) ${end}); do + send_match "${j}" $((j + src_delta)) || return 1 + done + send_nomatch $((end + 1)) $((end + 1 + src_delta)) || return 1 + + # Delete elements now and then + if [ $((i % 3)) -eq 0 ]; then + del "$(format)" || return 1 + for j in $(seq "$start" \ + $((range_size / 2 + 1)) ${end}); do + send_nomatch "${j}" $((j + src_delta)) \ + || return 1 + done + fi + + range_size=$((range_size + 1)) + start=$((end + range_size)) + done +} + +# Concurrency test template: +# - add all the elements +# - start a thread for each physical thread that: +# - adds all the elements +# - flushes the set +# - adds all the elements +# - flushes the entire ruleset +# - adds the set back +# - adds all the elements +# - delete all the elements +test_concurrency() { + proto=${flood_proto} + tools=${flood_tools} + chain_spec=${flood_spec} + setup veth flood_"${proto}" set || return ${ksft_skip} + + range_size=1 + cstart=${start} + flood_pids= + for i in $(seq "$start" $((start + count))); do + end=$((start + range_size)) + srcstart=$((start + src_delta)) + srcend=$((end + src_delta)) + + add "$(format)" || return 1 + + flood "${i}" $((i + src_delta)) & flood_pids="${flood_pids} $!" + + range_size=$((range_size + 1)) + start=$((end + range_size)) + done + + sleep $((RANDOM%10)) + + pids= + for c in $(seq 1 "$(nproc)"); do ( + for r in $(seq 1 "${race_repeat}"); do + range_size=1 + + # $start needs to be local to this subshell + # shellcheck disable=SC2030 + start=${cstart} + for i in $(seq "$start" $((start + count))); do + end=$((start + range_size)) + srcstart=$((start + src_delta)) + srcend=$((end + src_delta)) + + add "$(format)" 2>/dev/null + + range_size=$((range_size + 1)) + start=$((end + range_size)) + done + + nft flush inet filter test 2>/dev/null + + range_size=1 + start=${cstart} + for i in $(seq "$start" $((start + count))); do + end=$((start + range_size)) + srcstart=$((start + src_delta)) + srcend=$((end + src_delta)) + + add "$(format)" 2>/dev/null + + range_size=$((range_size + 1)) + start=$((end + range_size)) + done + + nft flush ruleset + setup set 2>/dev/null + + range_size=1 + start=${cstart} + for i in $(seq "$start" $((start + count))); do + end=$((start + range_size)) + srcstart=$((start + src_delta)) + srcend=$((end + src_delta)) + + add "$(format)" 2>/dev/null + + range_size=$((range_size + 1)) + start=$((end + range_size)) + done + + range_size=1 + start=${cstart} + for i in $(seq "$start" $((start + count))); do + end=$((start + range_size)) + srcstart=$((start + src_delta)) + srcend=$((end + src_delta)) + + del "$(format)" 2>/dev/null + + range_size=$((range_size + 1)) + start=$((end + range_size)) + done + done + ) & pids="${pids} $!" + done + + # shellcheck disable=SC2046,SC2086 # word splitting wanted here + wait $(for pid in ${pids}; do echo ${pid}; done) + # shellcheck disable=SC2046,SC2086 + kill $(for pid in ${flood_pids}; do echo ${pid}; done) 2>/dev/null + # shellcheck disable=SC2046,SC2086 + wait $(for pid in ${flood_pids}; do echo ${pid}; done) 2>/dev/null + + return 0 +} + +# Timeout test template: +# - add all the elements with 3s timeout while checking that packets match +# - wait 3s after the last insertion, check that packets don't match any entry +test_timeout() { + setup veth send_"${proto}" set || return ${ksft_skip} + + timeout=3 + + [ "$KSFT_MACHINE_SLOW" = "yes" ] && timeout=8 + + range_size=1 + for i in $(seq "$start" $((start + count))); do + end=$((start + range_size)) + srcstart=$((start + src_delta)) + srcend=$((end + src_delta)) + + add "$(format)" || return 1 + + for j in $(seq "$start" $((range_size / 2 + 1)) ${end}); do + send_match "${j}" $((j + src_delta)) || return 1 + done + + range_size=$((range_size + 1)) + start=$((end + range_size)) + done + sleep $timeout + for i in $(seq "$start" $((start + count))); do + end=$((start + range_size)) + srcstart=$((start + src_delta)) + srcend=$((end + src_delta)) + + for j in $(seq "$start" $((range_size / 2 + 1)) ${end}); do + send_nomatch "${j}" $((j + src_delta)) || return 1 + done + + range_size=$((range_size + 1)) + start=$((end + range_size)) + done +} + +# Performance test template: +# - add concatenated ranged entries +# - add non-ranged concatenated entries (for hash set matching rate baseline) +# - add ranged entries with first field only (for rbhash baseline) +# - start pktgen injection directly on device rx path of this namespace +# - measure drop only rate, hash and rbtree baselines, then matching rate +test_performance() { + chain_spec=${perf_spec} + dst="${perf_dst}" + src="${perf_src}" + setup veth perf set || return ${ksft_skip} + + first=${start} + range_size=1 + for set in test norange noconcat; do + start=${first} + for i in $(seq "$start" $((start + perf_entries))); do + end=$((start + range_size)) + srcstart=$((start + src_delta)) + srcend=$((end + src_delta)) + + if [ $((end / 65534)) -gt $((start / 65534)) ]; then + start=${end} + end=$((end + 1)) + elif [ "$start" -eq "$end" ]; then + end=$((start + 1)) + fi + + add_perf ${set} + + start=$((end + range_size)) + done > "${tmp}" + nft -f "${tmp}" + done + + perf $((end - 1)) "$srcstart" + + sleep 2 + + nft add rule netdev perf test counter name \"test\" drop + nft reset counter netdev perf test >/dev/null 2>&1 + sleep "${perf_duration}" + pps="$(printf %10s $(($(count_perf_packets) / perf_duration)))" + info " baseline (drop from netdev hook): ${pps}pps" + handle="$(nft -a list chain netdev perf test | grep counter)" + handle="${handle##* }" + nft delete rule netdev perf test handle "${handle}" + + nft add rule "netdev perf test ${chain_spec} @norange \ + counter name \"test\" drop" + nft reset counter netdev perf test >/dev/null 2>&1 + sleep "${perf_duration}" + pps="$(printf %10s $(($(count_perf_packets) / perf_duration)))" + info " baseline hash (non-ranged entries): ${pps}pps" + handle="$(nft -a list chain netdev perf test | grep counter)" + handle="${handle##* }" + nft delete rule netdev perf test handle "${handle}" + + nft add rule "netdev perf test ${chain_spec%%. *} @noconcat \ + counter name \"test\" drop" + nft reset counter netdev perf test >/dev/null 2>&1 + sleep "${perf_duration}" + pps="$(printf %10s $(($(count_perf_packets) / perf_duration)))" + info " baseline rbtree (match on first field only): ${pps}pps" + handle="$(nft -a list chain netdev perf test | grep counter)" + handle="${handle##* }" + nft delete rule netdev perf test handle "${handle}" + + nft add rule "netdev perf test ${chain_spec} @test \ + counter name \"test\" drop" + nft reset counter netdev perf test >/dev/null 2>&1 + sleep "${perf_duration}" + pps="$(printf %10s $(($(count_perf_packets) / perf_duration)))" + p5="$(printf %5s "${perf_entries}")" + info " set with ${p5} full, ranged entries: ${pps}pps" + kill "${perf_pid}" +} + +test_bug_flush_remove_add() { + rounds=100 + [ "$KSFT_MACHINE_SLOW" = "yes" ] && rounds=10 + + set_cmd='{ set s { type ipv4_addr . inet_service; flags interval; }; }' + elem1='{ 10.0.0.1 . 22-25, 10.0.0.1 . 10-20 }' + elem2='{ 10.0.0.1 . 10-20, 10.0.0.1 . 22-25 }' + for i in $(seq 1 $rounds); do + nft add table t "$set_cmd" || return ${ksft_skip} + nft add element t s "$elem1" 2>/dev/null || return 1 + nft flush set t s 2>/dev/null || return 1 + nft add element t s "$elem2" 2>/dev/null || return 1 + done + nft flush ruleset +} + +# - add ranged element, check that packets match it +# - reload the set, check packets still match +test_bug_reload() { + setup veth send_"${proto}" set || return ${ksft_skip} + rstart=${start} + + range_size=1 + for i in $(seq "${start}" $((start + count))); do + end=$((start + range_size)) + + # Avoid negative or zero-sized port ranges + if [ $((end / 65534)) -gt $((start / 65534)) ]; then + start=${end} + end=$((end + 1)) + fi + srcstart=$((start + src_delta)) + srcend=$((end + src_delta)) + + add "$(format)" || return 1 + range_size=$((range_size + 1)) + start=$((end + range_size)) + done + + # check kernel does allocate pcpu sctrach map + # for reload with no elemet add/delete + ( echo flush set inet filter test ; + nft list set inet filter test ) | nft -f - + + start=${rstart} + range_size=1 + + for i in $(seq "${start}" $((start + count))); do + end=$((start + range_size)) + + # Avoid negative or zero-sized port ranges + if [ $((end / 65534)) -gt $((start / 65534)) ]; then + start=${end} + end=$((end + 1)) + fi + srcstart=$((start + src_delta)) + srcend=$((end + src_delta)) + + for j in $(seq "$start" $((range_size / 2 + 1)) ${end}); do + send_match "${j}" $((j + src_delta)) || return 1 + done + + range_size=$((range_size + 1)) + start=$((end + range_size)) + done + + nft flush ruleset +} + +test_reported_issues() { + eval test_bug_"${subtest}" +} + +# Run everything in a separate network namespace +[ "${1}" != "run" ] && { unshare -n "${0}" run; exit $?; } +tmp="$(mktemp)" +trap cleanup_exit EXIT + +# Entry point for test runs +passed=0 +for name in ${TESTS}; do + printf "TEST: %s\n" "$(echo "$name" | tr '_' ' ')" + if [ "${name}" = "reported_issues" ]; then + SUBTESTS="${BUGS}" + else + SUBTESTS="${TYPES}" + fi + + for subtest in ${SUBTESTS}; do + eval desc=\$TYPE_"${subtest}" + IFS=' +' + for __line in ${desc}; do + # shellcheck disable=SC2086 + eval ${__line%% *}=\"${__line##* }\"; + done + IFS=' +' + + if [ "${name}" = "concurrency" ] && \ + [ "${race_repeat}" = "0" ]; then + continue + fi + if [ "${name}" = "performance" ] && \ + [ "${perf_duration}" = "0" ]; then + continue + fi + + [ "$KSFT_MACHINE_SLOW" = "yes" ] && count=1 + + printf " %-32s " "${display}" + tthen=$(date +%s) + eval test_"${name}" + ret=$? + + tnow=$(date +%s) + printf "%5ds%-30s" $((tnow-tthen)) + + if [ $ret -eq 0 ]; then + printf "[ OK ]\n" + info_flush + passed=$((passed + 1)) + elif [ $ret -eq 1 ]; then + printf "[FAIL]\n" + err_flush + exit 1 + elif [ $ret -eq ${ksft_skip} ]; then + printf "[SKIP]\n" + err_flush + fi + done +done + +[ ${passed} -eq 0 ] && exit ${ksft_skip} || exit 0 diff --git a/tools/testing/selftests/net/netfilter/nft_concat_range_perf.sh b/tools/testing/selftests/net/netfilter/nft_concat_range_perf.sh new file mode 100755 index 0000000000..5d276995a5 --- /dev/null +++ b/tools/testing/selftests/net/netfilter/nft_concat_range_perf.sh @@ -0,0 +1,9 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# + +source lib.sh + +[ "$KSFT_MACHINE_SLOW" = yes ] && exit ${ksft_skip} + +NFT_CONCAT_RANGE_TESTS="performance" exec ./nft_concat_range.sh diff --git a/tools/testing/selftests/net/netfilter/nft_conntrack_helper.sh b/tools/testing/selftests/net/netfilter/nft_conntrack_helper.sh new file mode 100755 index 0000000000..abcaa73371 --- /dev/null +++ b/tools/testing/selftests/net/netfilter/nft_conntrack_helper.sh @@ -0,0 +1,171 @@ +#!/bin/bash +# +# This tests connection tracking helper assignment: +# 1. can attach ftp helper to a connection from nft ruleset. +# 2. auto-assign still works. +# +# Kselftest framework requirement - SKIP code is 4. + +source lib.sh + +ret=0 + +testipv6=1 + +checktool "socat -h" "run test without socat" +checktool "conntrack --version" "run test without conntrack" +checktool "nft --version" "run test without nft" + +cleanup() +{ + ip netns pids "$ns1" | xargs kill 2>/dev/null + + ip netns del "$ns1" + ip netns del "$ns2" +} + +trap cleanup EXIT + +setup_ns ns1 ns2 + +if ! ip link add veth0 netns "$ns1" type veth peer name veth0 netns "$ns2" > /dev/null 2>&1;then + echo "SKIP: No virtual ethernet pair device support in kernel" + exit $ksft_skip +fi + +ip -net "$ns1" link set veth0 up +ip -net "$ns2" link set veth0 up + +ip -net "$ns1" addr add 10.0.1.1/24 dev veth0 +ip -net "$ns1" addr add dead:1::1/64 dev veth0 nodad + +ip -net "$ns2" addr add 10.0.1.2/24 dev veth0 +ip -net "$ns2" addr add dead:1::2/64 dev veth0 nodad + +load_ruleset_family() { + local family=$1 + local ns=$2 + +ip netns exec "$ns" nft -f - <<EOF +table $family raw { + ct helper ftp { + type "ftp" protocol tcp + } + chain pre { + type filter hook prerouting priority 0; policy accept; + tcp dport 2121 ct helper set "ftp" + } + chain output { + type filter hook output priority 0; policy accept; + tcp dport 2121 ct helper set "ftp" + } +} +EOF + return $? +} + +check_for_helper() +{ + local netns=$1 + local message=$2 + local port=$3 + + if echo "$message" |grep -q 'ipv6';then + local family="ipv6" + else + local family="ipv4" + fi + + if ! ip netns exec "$netns" conntrack -L -f $family -p tcp --dport "$port" 2> /dev/null |grep -q 'helper=ftp';then + if [ "$autoassign" -eq 0 ] ;then + echo "FAIL: ${netns} did not show attached helper $message" 1>&2 + ret=1 + else + echo "PASS: ${netns} did not show attached helper $message" 1>&2 + fi + else + if [ "$autoassign" -eq 0 ] ;then + echo "PASS: ${netns} connection on port $port has ftp helper attached" 1>&2 + else + echo "FAIL: ${netns} connection on port $port has ftp helper attached" 1>&2 + ret=1 + fi + fi + + return 0 +} + +listener_ready() +{ + ns="$1" + port="$2" + proto="$3" + ss -N "$ns" -lnt -o "sport = :$port" | grep -q "$port" +} + +test_helper() +{ + local port=$1 + local autoassign=$2 + + if [ "$autoassign" -eq 0 ] ;then + msg="set via ruleset" + else + msg="auto-assign" + fi + + ip netns exec "$ns2" socat -t 3 -u -4 TCP-LISTEN:"$port",reuseaddr STDOUT > /dev/null & + busywait "$BUSYWAIT_TIMEOUT" listener_ready "$ns2" "$port" "-4" + + ip netns exec "$ns1" socat -u -4 STDIN TCP:10.0.1.2:"$port" < /dev/null > /dev/null + + check_for_helper "$ns1" "ip $msg" "$port" "$autoassign" + check_for_helper "$ns2" "ip $msg" "$port" "$autoassign" + + if [ $testipv6 -eq 0 ] ;then + return 0 + fi + + ip netns exec "$ns1" conntrack -F 2> /dev/null + ip netns exec "$ns2" conntrack -F 2> /dev/null + + ip netns exec "$ns2" socat -t 3 -u -6 TCP-LISTEN:"$port",reuseaddr STDOUT > /dev/null & + busywait $BUSYWAIT_TIMEOUT listener_ready "$ns2" "$port" "-6" + + ip netns exec "$ns1" socat -t 3 -u -6 STDIN TCP:"[dead:1::2]":"$port" < /dev/null > /dev/null + + check_for_helper "$ns1" "ipv6 $msg" "$port" + check_for_helper "$ns2" "ipv6 $msg" "$port" +} + +if ! load_ruleset_family ip "$ns1"; then + echo "FAIL: ${ns1} cannot load ip ruleset" 1>&2 + exit 1 +fi + +if ! load_ruleset_family ip6 "$ns1"; then + echo "SKIP: ${ns1} cannot load ip6 ruleset" 1>&2 + testipv6=0 +fi + +if ! load_ruleset_family inet "${ns2}"; then + echo "SKIP: ${ns1} cannot load inet ruleset" 1>&2 + if ! load_ruleset_family ip "${ns2}"; then + echo "FAIL: ${ns2} cannot load ip ruleset" 1>&2 + exit 1 + fi + + if [ "$testipv6" -eq 1 ] ;then + if ! load_ruleset_family ip6 "$ns2"; then + echo "FAIL: ${ns2} cannot load ip6 ruleset" 1>&2 + exit 1 + fi + fi +fi + +test_helper 2121 0 +ip netns exec "$ns1" sysctl -qe 'net.netfilter.nf_conntrack_helper=1' +ip netns exec "$ns2" sysctl -qe 'net.netfilter.nf_conntrack_helper=1' +test_helper 21 1 + +exit $ret diff --git a/tools/testing/selftests/net/netfilter/nft_fib.sh b/tools/testing/selftests/net/netfilter/nft_fib.sh new file mode 100755 index 0000000000..ce1451c275 --- /dev/null +++ b/tools/testing/selftests/net/netfilter/nft_fib.sh @@ -0,0 +1,234 @@ +#!/bin/bash +# +# This tests the fib expression. +# +# Kselftest framework requirement - SKIP code is 4. + +source lib.sh + +ret=0 + +timeout=4 + +log_netns=$(sysctl -n net.netfilter.nf_log_all_netns) + +cleanup() +{ + cleanup_all_ns + + [ "$log_netns" -eq 0 ] && sysctl -q net.netfilter.nf_log_all_netns=$log_netns +} + +checktool "nft --version" "run test without nft" + +setup_ns nsrouter ns1 ns2 + +trap cleanup EXIT + +if dmesg | grep -q ' nft_rpfilter: ';then + dmesg -c | grep ' nft_rpfilter: ' + echo "WARN: a previous test run has failed" 1>&2 +fi + +sysctl -q net.netfilter.nf_log_all_netns=1 + +load_ruleset() { + local netns=$1 + +ip netns exec "$netns" nft -f /dev/stdin <<EOF +table inet filter { + chain prerouting { + type filter hook prerouting priority 0; policy accept; + fib saddr . iif oif missing counter log prefix "$netns nft_rpfilter: " drop + } +} +EOF +} + +load_pbr_ruleset() { + local netns=$1 + +ip netns exec "$netns" nft -f /dev/stdin <<EOF +table inet filter { + chain forward { + type filter hook forward priority raw; + fib saddr . iif oif gt 0 accept + log drop + } +} +EOF +} + +load_ruleset_count() { + local netns=$1 + +ip netns exec "$netns" nft -f /dev/stdin <<EOF +table inet filter { + chain prerouting { + type filter hook prerouting priority 0; policy accept; + ip daddr 1.1.1.1 fib saddr . iif oif missing counter drop + ip6 daddr 1c3::c01d fib saddr . iif oif missing counter drop + } +} +EOF +} + +check_drops() { + if dmesg | grep -q ' nft_rpfilter: ';then + dmesg | grep ' nft_rpfilter: ' + echo "FAIL: rpfilter did drop packets" + return 1 + fi + + return 0 +} + +check_fib_counter() { + local want=$1 + local ns=$2 + local address=$3 + + if ! ip netns exec "$ns" nft list table inet filter | grep 'fib saddr . iif' | grep "$address" | grep -q "packets $want";then + echo "Netns $ns fib counter doesn't match expected packet count of $want for $address" 1>&2 + ip netns exec "$ns" nft list table inet filter + return 1 + fi + + if [ "$want" -gt 0 ]; then + echo "PASS: fib expression did drop packets for $address" + fi + + return 0 +} + +load_ruleset "$nsrouter" +load_ruleset "$ns1" +load_ruleset "$ns2" + +if ! ip link add veth0 netns "$nsrouter" type veth peer name eth0 netns "$ns1" > /dev/null 2>&1; then + echo "SKIP: No virtual ethernet pair device support in kernel" + exit $ksft_skip +fi +ip link add veth1 netns "$nsrouter" type veth peer name eth0 netns "$ns2" + +ip -net "$nsrouter" link set veth0 up +ip -net "$nsrouter" addr add 10.0.1.1/24 dev veth0 +ip -net "$nsrouter" addr add dead:1::1/64 dev veth0 nodad + +ip -net "$nsrouter" link set veth1 up +ip -net "$nsrouter" addr add 10.0.2.1/24 dev veth1 +ip -net "$nsrouter" addr add dead:2::1/64 dev veth1 nodad + +ip -net "$ns1" link set eth0 up +ip -net "$ns2" link set eth0 up + +ip -net "$ns1" addr add 10.0.1.99/24 dev eth0 +ip -net "$ns1" addr add dead:1::99/64 dev eth0 nodad +ip -net "$ns1" route add default via 10.0.1.1 +ip -net "$ns1" route add default via dead:1::1 + +ip -net "$ns2" addr add 10.0.2.99/24 dev eth0 +ip -net "$ns2" addr add dead:2::99/64 dev eth0 nodad +ip -net "$ns2" route add default via 10.0.2.1 +ip -net "$ns2" route add default via dead:2::1 + +test_ping() { + local daddr4=$1 + local daddr6=$2 + + if ! ip netns exec "$ns1" ping -c 1 -q "$daddr4" > /dev/null; then + check_drops + echo "FAIL: ${ns1} cannot reach $daddr4, ret $ret" 1>&2 + return 1 + fi + + if ! ip netns exec "$ns1" ping -c 1 -q "$daddr6" > /dev/null; then + check_drops + echo "FAIL: ${ns1} cannot reach $daddr6, ret $ret" 1>&2 + return 1 + fi + + return 0 +} + +ip netns exec "$nsrouter" sysctl net.ipv6.conf.all.forwarding=1 > /dev/null +ip netns exec "$nsrouter" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null +ip netns exec "$nsrouter" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null +ip netns exec "$nsrouter" sysctl net.ipv4.conf.all.rp_filter=0 > /dev/null +ip netns exec "$nsrouter" sysctl net.ipv4.conf.veth0.rp_filter=0 > /dev/null + +test_ping 10.0.2.1 dead:2::1 || exit 1 +check_drops || exit 1 + +test_ping 10.0.2.99 dead:2::99 || exit 1 +check_drops || exit 1 + +echo "PASS: fib expression did not cause unwanted packet drops" + +ip netns exec "$nsrouter" nft flush table inet filter + +ip -net "$ns1" route del default +ip -net "$ns1" -6 route del default + +ip -net "$ns1" addr del 10.0.1.99/24 dev eth0 +ip -net "$ns1" addr del dead:1::99/64 dev eth0 + +ip -net "$ns1" addr add 10.0.2.99/24 dev eth0 +ip -net "$ns1" addr add dead:2::99/64 dev eth0 nodad + +ip -net "$ns1" route add default via 10.0.2.1 +ip -net "$ns1" -6 route add default via dead:2::1 + +ip -net "$nsrouter" addr add dead:2::1/64 dev veth0 nodad + +# switch to ruleset that doesn't log, this time +# its expected that this does drop the packets. +load_ruleset_count "$nsrouter" + +# ns1 has a default route, but nsrouter does not. +# must not check return value, ping to 1.1.1.1 will +# fail. +check_fib_counter 0 "$nsrouter" 1.1.1.1 || exit 1 +check_fib_counter 0 "$nsrouter" 1c3::c01d || exit 1 + +ip netns exec "$ns1" ping -W 0.5 -c 1 -q 1.1.1.1 > /dev/null +check_fib_counter 1 "$nsrouter" 1.1.1.1 || exit 1 + +ip netns exec "$ns1" ping -W 0.5 -i 0.1 -c 3 -q 1c3::c01d > /dev/null +check_fib_counter 3 "$nsrouter" 1c3::c01d || exit 1 + +# delete all rules +ip netns exec "$ns1" nft flush ruleset +ip netns exec "$ns2" nft flush ruleset +ip netns exec "$nsrouter" nft flush ruleset + +ip -net "$ns1" addr add 10.0.1.99/24 dev eth0 +ip -net "$ns1" addr add dead:1::99/64 dev eth0 nodad + +ip -net "$ns1" addr del 10.0.2.99/24 dev eth0 +ip -net "$ns1" addr del dead:2::99/64 dev eth0 + +ip -net "$nsrouter" addr del dead:2::1/64 dev veth0 + +# ... pbr ruleset for the router, check iif+oif. +if ! load_pbr_ruleset "$nsrouter";then + echo "SKIP: Could not load fib forward ruleset" + exit $ksft_skip +fi + +ip -net "$nsrouter" rule add from all table 128 +ip -net "$nsrouter" rule add from all iif veth0 table 129 +ip -net "$nsrouter" route add table 128 to 10.0.1.0/24 dev veth0 +ip -net "$nsrouter" route add table 129 to 10.0.2.0/24 dev veth1 + +# drop main ipv4 table +ip -net "$nsrouter" -4 rule delete table main + +if ! test_ping 10.0.2.99 dead:2::99;then + ip -net "$nsrouter" nft list ruleset + echo "FAIL: fib mismatch in pbr setup" + exit 1 +fi + +echo "PASS: fib expression forward check with policy based routing" +exit 0 diff --git a/tools/testing/selftests/net/netfilter/nft_flowtable.sh b/tools/testing/selftests/net/netfilter/nft_flowtable.sh new file mode 100755 index 0000000000..b399555085 --- /dev/null +++ b/tools/testing/selftests/net/netfilter/nft_flowtable.sh @@ -0,0 +1,671 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# This tests basic flowtable functionality. +# Creates following default topology: +# +# Originator (MTU 9000) <-Router1-> MTU 1500 <-Router2-> Responder (MTU 2000) +# Router1 is the one doing flow offloading, Router2 has no special +# purpose other than having a link that is smaller than either Originator +# and responder, i.e. TCPMSS announced values are too large and will still +# result in fragmentation and/or PMTU discovery. +# +# You can check with different Orgininator/Link/Responder MTU eg: +# nft_flowtable.sh -o8000 -l1500 -r2000 +# + +source lib.sh + +ret=0 +SOCAT_TIMEOUT=60 + +nsin="" +ns1out="" +ns2out="" + +log_netns=$(sysctl -n net.netfilter.nf_log_all_netns) + +checktool "nft --version" "run test without nft tool" +checktool "socat -h" "run test without socat" + +setup_ns ns1 ns2 nsr1 nsr2 + +cleanup() { + ip netns pids "$ns1" | xargs kill 2>/dev/null + ip netns pids "$ns2" | xargs kill 2>/dev/null + + cleanup_all_ns + + rm -f "$nsin" "$ns1out" "$ns2out" + + [ "$log_netns" -eq 0 ] && sysctl -q net.netfilter.nf_log_all_netns="$log_netns" +} + +trap cleanup EXIT + +sysctl -q net.netfilter.nf_log_all_netns=1 + +ip link add veth0 netns "$nsr1" type veth peer name eth0 netns "$ns1" +ip link add veth1 netns "$nsr1" type veth peer name veth0 netns "$nsr2" + +ip link add veth1 netns "$nsr2" type veth peer name eth0 netns "$ns2" + +for dev in veth0 veth1; do + ip -net "$nsr1" link set "$dev" up + ip -net "$nsr2" link set "$dev" up +done + +ip -net "$nsr1" addr add 10.0.1.1/24 dev veth0 +ip -net "$nsr1" addr add dead:1::1/64 dev veth0 nodad + +ip -net "$nsr2" addr add 10.0.2.1/24 dev veth1 +ip -net "$nsr2" addr add dead:2::1/64 dev veth1 nodad + +# set different MTUs so we need to push packets coming from ns1 (large MTU) +# to ns2 (smaller MTU) to stack either to perform fragmentation (ip_no_pmtu_disc=1), +# or to do PTMU discovery (send ICMP error back to originator). +# ns2 is going via nsr2 with a smaller mtu, so that TCPMSS announced by both peers +# is NOT the lowest link mtu. + +omtu=9000 +lmtu=1500 +rmtu=2000 + +usage(){ + echo "nft_flowtable.sh [OPTIONS]" + echo + echo "MTU options" + echo " -o originator" + echo " -l link" + echo " -r responder" + exit 1 +} + +while getopts "o:l:r:" o +do + case $o in + o) omtu=$OPTARG;; + l) lmtu=$OPTARG;; + r) rmtu=$OPTARG;; + *) usage;; + esac +done + +if ! ip -net "$nsr1" link set veth0 mtu "$omtu"; then + exit 1 +fi + +ip -net "$ns1" link set eth0 mtu "$omtu" + +if ! ip -net "$nsr2" link set veth1 mtu "$rmtu"; then + exit 1 +fi + +if ! ip -net "$nsr1" link set veth1 mtu "$lmtu"; then + exit 1 +fi + +if ! ip -net "$nsr2" link set veth0 mtu "$lmtu"; then + exit 1 +fi + +ip -net "$ns2" link set eth0 mtu "$rmtu" + +# transfer-net between nsr1 and nsr2. +# these addresses are not used for connections. +ip -net "$nsr1" addr add 192.168.10.1/24 dev veth1 +ip -net "$nsr1" addr add fee1:2::1/64 dev veth1 nodad + +ip -net "$nsr2" addr add 192.168.10.2/24 dev veth0 +ip -net "$nsr2" addr add fee1:2::2/64 dev veth0 nodad + +for i in 0 1; do + ip netns exec "$nsr1" sysctl net.ipv4.conf.veth$i.forwarding=1 > /dev/null + ip netns exec "$nsr2" sysctl net.ipv4.conf.veth$i.forwarding=1 > /dev/null +done + +for ns in "$ns1" "$ns2";do + ip -net "$ns" link set eth0 up + + if ! ip netns exec "$ns" sysctl net.ipv4.tcp_no_metrics_save=1 > /dev/null; then + echo "ERROR: Check Originator/Responder values (problem during address addition)" + exit 1 + fi + # don't set ip DF bit for first two tests + ip netns exec "$ns" sysctl net.ipv4.ip_no_pmtu_disc=1 > /dev/null +done + +ip -net "$ns1" addr add 10.0.1.99/24 dev eth0 +ip -net "$ns2" addr add 10.0.2.99/24 dev eth0 +ip -net "$ns1" route add default via 10.0.1.1 +ip -net "$ns2" route add default via 10.0.2.1 +ip -net "$ns1" addr add dead:1::99/64 dev eth0 nodad +ip -net "$ns2" addr add dead:2::99/64 dev eth0 nodad +ip -net "$ns1" route add default via dead:1::1 +ip -net "$ns2" route add default via dead:2::1 + +ip -net "$nsr1" route add default via 192.168.10.2 +ip -net "$nsr2" route add default via 192.168.10.1 + +ip netns exec "$nsr1" nft -f - <<EOF +table inet filter { + flowtable f1 { + hook ingress priority 0 + devices = { veth0, veth1 } + } + + counter routed_orig { } + counter routed_repl { } + + chain forward { + type filter hook forward priority 0; policy drop; + + # flow offloaded? Tag ct with mark 1, so we can detect when it fails. + meta oif "veth1" tcp dport 12345 ct mark set 1 flow add @f1 counter name routed_orig accept + + # count packets supposedly offloaded as per direction. + ct mark 1 counter name ct direction map { original : routed_orig, reply : routed_repl } accept + + ct state established,related accept + + meta nfproto ipv4 meta l4proto icmp accept + meta nfproto ipv6 meta l4proto icmpv6 accept + } +} +EOF + +if [ $? -ne 0 ]; then + echo "SKIP: Could not load nft ruleset" + exit $ksft_skip +fi + +ip netns exec "$ns2" nft -f - <<EOF +table inet filter { + counter ip4dscp0 { } + counter ip4dscp3 { } + + chain input { + type filter hook input priority 0; policy accept; + meta l4proto tcp goto { + ip dscp cs3 counter name ip4dscp3 accept + ip dscp 0 counter name ip4dscp0 accept + } + } +} +EOF + +if [ $? -ne 0 ]; then + echo -n "SKIP: Could not load ruleset: " + nft --version + exit $ksft_skip +fi + +# test basic connectivity +if ! ip netns exec "$ns1" ping -c 1 -q 10.0.2.99 > /dev/null; then + echo "ERROR: $ns1 cannot reach ns2" 1>&2 + exit 1 +fi + +if ! ip netns exec "$ns2" ping -c 1 -q 10.0.1.99 > /dev/null; then + echo "ERROR: $ns2 cannot reach $ns1" 1>&2 + exit 1 +fi + +nsin=$(mktemp) +ns1out=$(mktemp) +ns2out=$(mktemp) + +make_file() +{ + name=$1 + + SIZE=$((RANDOM % (1024 * 128))) + SIZE=$((SIZE + (1024 * 8))) + TSIZE=$((SIZE * 1024)) + + dd if=/dev/urandom of="$name" bs=1024 count=$SIZE 2> /dev/null + + SIZE=$((RANDOM % 1024)) + SIZE=$((SIZE + 128)) + TSIZE=$((TSIZE + SIZE)) + dd if=/dev/urandom conf=notrunc of="$name" bs=1 count=$SIZE 2> /dev/null +} + +check_counters() +{ + local what=$1 + local ok=1 + + local orig repl + orig=$(ip netns exec "$nsr1" nft reset counter inet filter routed_orig | grep packets) + repl=$(ip netns exec "$nsr1" nft reset counter inet filter routed_repl | grep packets) + + local orig_cnt=${orig#*bytes} + local repl_cnt=${repl#*bytes} + + local fs + fs=$(du -sb "$nsin") + local max_orig=${fs%%/*} + local max_repl=$((max_orig/4)) + + # flowtable fastpath should bypass normal routing one, i.e. the counters in forward hook + # should always be lower than the size of the transmitted file (max_orig). + if [ "$orig_cnt" -gt "$max_orig" ];then + echo "FAIL: $what: original counter $orig_cnt exceeds expected value $max_orig" 1>&2 + ret=1 + ok=0 + fi + + if [ "$repl_cnt" -gt $max_repl ];then + echo "FAIL: $what: reply counter $repl_cnt exceeds expected value $max_repl" 1>&2 + ret=1 + ok=0 + fi + + if [ $ok -eq 1 ]; then + echo "PASS: $what" + fi +} + +check_dscp() +{ + local what=$1 + local ok=1 + + local counter + counter=$(ip netns exec "$ns2" nft reset counter inet filter ip4dscp3 | grep packets) + + local pc4=${counter%*bytes*} + local pc4=${pc4#*packets} + + counter=$(ip netns exec "$ns2" nft reset counter inet filter ip4dscp0 | grep packets) + local pc4z=${counter%*bytes*} + local pc4z=${pc4z#*packets} + + case "$what" in + "dscp_none") + if [ "$pc4" -gt 0 ] || [ "$pc4z" -eq 0 ]; then + echo "FAIL: dscp counters do not match, expected dscp3 == 0, dscp0 > 0, but got $pc4,$pc4z" 1>&2 + ret=1 + ok=0 + fi + ;; + "dscp_fwd") + if [ "$pc4" -eq 0 ] || [ "$pc4z" -eq 0 ]; then + echo "FAIL: dscp counters do not match, expected dscp3 and dscp0 > 0 but got $pc4,$pc4z" 1>&2 + ret=1 + ok=0 + fi + ;; + "dscp_ingress") + if [ "$pc4" -eq 0 ] || [ "$pc4z" -gt 0 ]; then + echo "FAIL: dscp counters do not match, expected dscp3 > 0, dscp0 == 0 but got $pc4,$pc4z" 1>&2 + ret=1 + ok=0 + fi + ;; + "dscp_egress") + if [ "$pc4" -eq 0 ] || [ "$pc4z" -gt 0 ]; then + echo "FAIL: dscp counters do not match, expected dscp3 > 0, dscp0 == 0 but got $pc4,$pc4z" 1>&2 + ret=1 + ok=0 + fi + ;; + *) + echo "FAIL: Unknown DSCP check" 1>&2 + ret=1 + ok=0 + esac + + if [ "$ok" -eq 1 ] ;then + echo "PASS: $what: dscp packet counters match" + fi +} + +check_transfer() +{ + in=$1 + out=$2 + what=$3 + + if ! cmp "$in" "$out" > /dev/null 2>&1; then + echo "FAIL: file mismatch for $what" 1>&2 + ls -l "$in" + ls -l "$out" + return 1 + fi + + return 0 +} + +listener_ready() +{ + ss -N "$nsb" -lnt -o "sport = :12345" | grep -q 12345 +} + +test_tcp_forwarding_ip() +{ + local nsa=$1 + local nsb=$2 + local dstip=$3 + local dstport=$4 + local lret=0 + + timeout "$SOCAT_TIMEOUT" ip netns exec "$nsb" socat -4 TCP-LISTEN:12345,reuseaddr STDIO < "$nsin" > "$ns2out" & + lpid=$! + + busywait 1000 listener_ready + + timeout "$SOCAT_TIMEOUT" ip netns exec "$nsa" socat -4 TCP:"$dstip":"$dstport" STDIO < "$nsin" > "$ns1out" + + wait $lpid + + if ! check_transfer "$nsin" "$ns2out" "ns1 -> ns2"; then + lret=1 + ret=1 + fi + + if ! check_transfer "$nsin" "$ns1out" "ns1 <- ns2"; then + lret=1 + ret=1 + fi + + return $lret +} + +test_tcp_forwarding() +{ + test_tcp_forwarding_ip "$1" "$2" 10.0.2.99 12345 + + return $? +} + +test_tcp_forwarding_set_dscp() +{ + check_dscp "dscp_none" + +ip netns exec "$nsr1" nft -f - <<EOF +table netdev dscpmangle { + chain setdscp0 { + type filter hook ingress device "veth0" priority 0; policy accept + ip dscp set cs3 + } +} +EOF +if [ $? -eq 0 ]; then + test_tcp_forwarding_ip "$1" "$2" 10.0.2.99 12345 + check_dscp "dscp_ingress" + + ip netns exec "$nsr1" nft delete table netdev dscpmangle +else + echo "SKIP: Could not load netdev:ingress for veth0" +fi + +ip netns exec "$nsr1" nft -f - <<EOF +table netdev dscpmangle { + chain setdscp0 { + type filter hook egress device "veth1" priority 0; policy accept + ip dscp set cs3 + } +} +EOF +if [ $? -eq 0 ]; then + test_tcp_forwarding_ip "$1" "$2" 10.0.2.99 12345 + check_dscp "dscp_egress" + + ip netns exec "$nsr1" nft flush table netdev dscpmangle +else + echo "SKIP: Could not load netdev:egress for veth1" +fi + + # partial. If flowtable really works, then both dscp-is-0 and dscp-is-cs3 + # counters should have seen packets (before and after ft offload kicks in). + ip netns exec "$nsr1" nft -a insert rule inet filter forward ip dscp set cs3 + test_tcp_forwarding_ip "$1" "$2" 10.0.2.99 12345 + check_dscp "dscp_fwd" +} + +test_tcp_forwarding_nat() +{ + local lret + local pmtu + + test_tcp_forwarding_ip "$1" "$2" 10.0.2.99 12345 + lret=$? + + pmtu=$3 + what=$4 + + if [ "$lret" -eq 0 ] ; then + if [ "$pmtu" -eq 1 ] ;then + check_counters "flow offload for ns1/ns2 with masquerade and pmtu discovery $what" + else + echo "PASS: flow offload for ns1/ns2 with masquerade $what" + fi + + test_tcp_forwarding_ip "$1" "$2" 10.6.6.6 1666 + lret=$? + if [ "$pmtu" -eq 1 ] ;then + check_counters "flow offload for ns1/ns2 with dnat and pmtu discovery $what" + elif [ "$lret" -eq 0 ] ; then + echo "PASS: flow offload for ns1/ns2 with dnat $what" + fi + fi + + return $lret +} + +make_file "$nsin" + +# First test: +# No PMTU discovery, nsr1 is expected to fragment packets from ns1 to ns2 as needed. +# Due to MTU mismatch in both directions, all packets (except small packets like pure +# acks) have to be handled by normal forwarding path. Therefore, packet counters +# are not checked. +if test_tcp_forwarding "$ns1" "$ns2"; then + echo "PASS: flow offloaded for ns1/ns2" +else + echo "FAIL: flow offload for ns1/ns2:" 1>&2 + ip netns exec "$nsr1" nft list ruleset + ret=1 +fi + +# delete default route, i.e. ns2 won't be able to reach ns1 and +# will depend on ns1 being masqueraded in nsr1. +# expect ns1 has nsr1 address. +ip -net "$ns2" route del default via 10.0.2.1 +ip -net "$ns2" route del default via dead:2::1 +ip -net "$ns2" route add 192.168.10.1 via 10.0.2.1 + +# Second test: +# Same, but with NAT enabled. Same as in first test: we expect normal forward path +# to handle most packets. +ip netns exec "$nsr1" nft -f - <<EOF +table ip nat { + chain prerouting { + type nat hook prerouting priority 0; policy accept; + meta iif "veth0" ip daddr 10.6.6.6 tcp dport 1666 counter dnat ip to 10.0.2.99:12345 + } + + chain postrouting { + type nat hook postrouting priority 0; policy accept; + meta oifname "veth1" counter masquerade + } +} +EOF + +if ! test_tcp_forwarding_set_dscp "$ns1" "$ns2" 0 ""; then + echo "FAIL: flow offload for ns1/ns2 with dscp update" 1>&2 + exit 0 +fi + +if ! test_tcp_forwarding_nat "$ns1" "$ns2" 0 ""; then + echo "FAIL: flow offload for ns1/ns2 with NAT" 1>&2 + ip netns exec "$nsr1" nft list ruleset + ret=1 +fi + +# Third test: +# Same as second test, but with PMTU discovery enabled. This +# means that we expect the fastpath to handle packets as soon +# as the endpoints adjust the packet size. +ip netns exec "$ns1" sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null +ip netns exec "$ns2" sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null + +# reset counters. +# With pmtu in-place we'll also check that nft counters +# are lower than file size and packets were forwarded via flowtable layer. +# For earlier tests (large mtus), packets cannot be handled via flowtable +# (except pure acks and other small packets). +ip netns exec "$nsr1" nft reset counters table inet filter >/dev/null + +if ! test_tcp_forwarding_nat "$ns1" "$ns2" 1 ""; then + echo "FAIL: flow offload for ns1/ns2 with NAT and pmtu discovery" 1>&2 + ip netns exec "$nsr1" nft list ruleset +fi + +# Another test: +# Add bridge interface br0 to Router1, with NAT enabled. +test_bridge() { +if ! ip -net "$nsr1" link add name br0 type bridge 2>/dev/null;then + echo "SKIP: could not add bridge br0" + [ "$ret" -eq 0 ] && ret=$ksft_skip + return +fi +ip -net "$nsr1" addr flush dev veth0 +ip -net "$nsr1" link set up dev veth0 +ip -net "$nsr1" link set veth0 master br0 +ip -net "$nsr1" addr add 10.0.1.1/24 dev br0 +ip -net "$nsr1" addr add dead:1::1/64 dev br0 nodad +ip -net "$nsr1" link set up dev br0 + +ip netns exec "$nsr1" sysctl net.ipv4.conf.br0.forwarding=1 > /dev/null + +# br0 with NAT enabled. +ip netns exec "$nsr1" nft -f - <<EOF +flush table ip nat +table ip nat { + chain prerouting { + type nat hook prerouting priority 0; policy accept; + meta iif "br0" ip daddr 10.6.6.6 tcp dport 1666 counter dnat ip to 10.0.2.99:12345 + } + + chain postrouting { + type nat hook postrouting priority 0; policy accept; + meta oifname "veth1" counter masquerade + } +} +EOF + +if ! test_tcp_forwarding_nat "$ns1" "$ns2" 1 "on bridge"; then + echo "FAIL: flow offload for ns1/ns2 with bridge NAT" 1>&2 + ip netns exec "$nsr1" nft list ruleset + ret=1 +fi + + +# Another test: +# Add bridge interface br0 to Router1, with NAT and VLAN. +ip -net "$nsr1" link set veth0 nomaster +ip -net "$nsr1" link set down dev veth0 +ip -net "$nsr1" link add link veth0 name veth0.10 type vlan id 10 +ip -net "$nsr1" link set up dev veth0 +ip -net "$nsr1" link set up dev veth0.10 +ip -net "$nsr1" link set veth0.10 master br0 + +ip -net "$ns1" addr flush dev eth0 +ip -net "$ns1" link add link eth0 name eth0.10 type vlan id 10 +ip -net "$ns1" link set eth0 up +ip -net "$ns1" link set eth0.10 up +ip -net "$ns1" addr add 10.0.1.99/24 dev eth0.10 +ip -net "$ns1" route add default via 10.0.1.1 +ip -net "$ns1" addr add dead:1::99/64 dev eth0.10 nodad + +if ! test_tcp_forwarding_nat "$ns1" "$ns2" 1 "bridge and VLAN"; then + echo "FAIL: flow offload for ns1/ns2 with bridge NAT and VLAN" 1>&2 + ip netns exec "$nsr1" nft list ruleset + ret=1 +fi + +# restore test topology (remove bridge and VLAN) +ip -net "$nsr1" link set veth0 nomaster +ip -net "$nsr1" link set veth0 down +ip -net "$nsr1" link set veth0.10 down +ip -net "$nsr1" link delete veth0.10 type vlan +ip -net "$nsr1" link delete br0 type bridge +ip -net "$ns1" addr flush dev eth0.10 +ip -net "$ns1" link set eth0.10 down +ip -net "$ns1" link set eth0 down +ip -net "$ns1" link delete eth0.10 type vlan + +# restore address in ns1 and nsr1 +ip -net "$ns1" link set eth0 up +ip -net "$ns1" addr add 10.0.1.99/24 dev eth0 +ip -net "$ns1" route add default via 10.0.1.1 +ip -net "$ns1" addr add dead:1::99/64 dev eth0 nodad +ip -net "$ns1" route add default via dead:1::1 +ip -net "$nsr1" addr add 10.0.1.1/24 dev veth0 +ip -net "$nsr1" addr add dead:1::1/64 dev veth0 nodad +ip -net "$nsr1" link set up dev veth0 +} + +test_bridge + +KEY_SHA="0x"$(ps -af | sha1sum | cut -d " " -f 1) +KEY_AES="0x"$(ps -af | md5sum | cut -d " " -f 1) +SPI1=$RANDOM +SPI2=$RANDOM + +if [ $SPI1 -eq $SPI2 ]; then + SPI2=$((SPI2+1)) +fi + +do_esp() { + local ns=$1 + local me=$2 + local remote=$3 + local lnet=$4 + local rnet=$5 + local spi_out=$6 + local spi_in=$7 + + ip -net "$ns" xfrm state add src "$remote" dst "$me" proto esp spi "$spi_in" enc aes "$KEY_AES" auth sha1 "$KEY_SHA" mode tunnel sel src "$rnet" dst "$lnet" + ip -net "$ns" xfrm state add src "$me" dst "$remote" proto esp spi "$spi_out" enc aes "$KEY_AES" auth sha1 "$KEY_SHA" mode tunnel sel src "$lnet" dst "$rnet" + + # to encrypt packets as they go out (includes forwarded packets that need encapsulation) + ip -net "$ns" xfrm policy add src "$lnet" dst "$rnet" dir out tmpl src "$me" dst "$remote" proto esp mode tunnel priority 1 action allow + # to fwd decrypted packets after esp processing: + ip -net "$ns" xfrm policy add src "$rnet" dst "$lnet" dir fwd tmpl src "$remote" dst "$me" proto esp mode tunnel priority 1 action allow +} + +do_esp "$nsr1" 192.168.10.1 192.168.10.2 10.0.1.0/24 10.0.2.0/24 "$SPI1" "$SPI2" + +do_esp "$nsr2" 192.168.10.2 192.168.10.1 10.0.2.0/24 10.0.1.0/24 "$SPI2" "$SPI1" + +ip netns exec "$nsr1" nft delete table ip nat + +# restore default routes +ip -net "$ns2" route del 192.168.10.1 via 10.0.2.1 +ip -net "$ns2" route add default via 10.0.2.1 +ip -net "$ns2" route add default via dead:2::1 + +if test_tcp_forwarding "$ns1" "$ns2"; then + check_counters "ipsec tunnel mode for ns1/ns2" +else + echo "FAIL: ipsec tunnel mode for ns1/ns2" + ip netns exec "$nsr1" nft list ruleset 1>&2 + ip netns exec "$nsr1" cat /proc/net/xfrm_stat 1>&2 +fi + +if [ "$1" = "" ]; then + low=1280 + mtu=$((65536 - low)) + o=$(((RANDOM%mtu) + low)) + l=$(((RANDOM%mtu) + low)) + r=$(((RANDOM%mtu) + low)) + + echo "re-run with random mtus: -o $o -l $l -r $r" + $0 -o "$o" -l "$l" -r "$r" +fi + +exit $ret diff --git a/tools/testing/selftests/net/netfilter/nft_meta.sh b/tools/testing/selftests/net/netfilter/nft_meta.sh new file mode 100755 index 0000000000..71505b6cb2 --- /dev/null +++ b/tools/testing/selftests/net/netfilter/nft_meta.sh @@ -0,0 +1,142 @@ +#!/bin/bash + +# check iif/iifname/oifgroup/iiftype match. + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 +sfx=$(mktemp -u "XXXXXXXX") +ns0="ns0-$sfx" + +if ! nft --version > /dev/null 2>&1; then + echo "SKIP: Could not run test without nft tool" + exit $ksft_skip +fi + +cleanup() +{ + ip netns del "$ns0" +} + +ip netns add "$ns0" +ip -net "$ns0" link set lo up +ip -net "$ns0" addr add 127.0.0.1 dev lo + +trap cleanup EXIT + +currentyear=$(date +%Y) +lastyear=$((currentyear-1)) +ip netns exec "$ns0" nft -f /dev/stdin <<EOF +table inet filter { + counter iifcount {} + counter iifnamecount {} + counter iifgroupcount {} + counter iiftypecount {} + counter infproto4count {} + counter il4protocounter {} + counter imarkcounter {} + counter icpu0counter {} + counter ilastyearcounter {} + counter icurrentyearcounter {} + + counter oifcount {} + counter oifnamecount {} + counter oifgroupcount {} + counter oiftypecount {} + counter onfproto4count {} + counter ol4protocounter {} + counter oskuidcounter {} + counter oskgidcounter {} + counter omarkcounter {} + + chain input { + type filter hook input priority 0; policy accept; + + meta iif lo counter name "iifcount" + meta iifname "lo" counter name "iifnamecount" + meta iifgroup "default" counter name "iifgroupcount" + meta iiftype "loopback" counter name "iiftypecount" + meta nfproto ipv4 counter name "infproto4count" + meta l4proto icmp counter name "il4protocounter" + meta mark 42 counter name "imarkcounter" + meta cpu 0 counter name "icpu0counter" + meta time "$lastyear-01-01" - "$lastyear-12-31" counter name ilastyearcounter + meta time "$currentyear-01-01" - "$currentyear-12-31" counter name icurrentyearcounter + } + + chain output { + type filter hook output priority 0; policy accept; + meta oif lo counter name "oifcount" counter + meta oifname "lo" counter name "oifnamecount" + meta oifgroup "default" counter name "oifgroupcount" + meta oiftype "loopback" counter name "oiftypecount" + meta nfproto ipv4 counter name "onfproto4count" + meta l4proto icmp counter name "ol4protocounter" + meta skuid 0 counter name "oskuidcounter" + meta skgid 0 counter name "oskgidcounter" + meta mark 42 counter name "omarkcounter" + } +} +EOF + +if [ $? -ne 0 ]; then + echo "SKIP: Could not add test ruleset" + exit $ksft_skip +fi + +ret=0 + +check_one_counter() +{ + local cname="$1" + local want="packets $2" + local verbose="$3" + + if ! ip netns exec "$ns0" nft list counter inet filter "$cname" | grep -q "$want"; then + echo "FAIL: $cname, want \"$want\", got" + ret=1 + ip netns exec "$ns0" nft list counter inet filter "$cname" + fi +} + +check_lo_counters() +{ + local want="$1" + local verbose="$2" + local counter + + for counter in iifcount iifnamecount iifgroupcount iiftypecount infproto4count \ + oifcount oifnamecount oifgroupcount oiftypecount onfproto4count \ + il4protocounter icurrentyearcounter ol4protocounter \ + ; do + check_one_counter "$counter" "$want" "$verbose" + done +} + +check_lo_counters "0" false +ip netns exec "$ns0" ping -q -c 1 127.0.0.1 -m 42 > /dev/null + +check_lo_counters "2" true + +check_one_counter oskuidcounter "1" true +check_one_counter oskgidcounter "1" true +check_one_counter imarkcounter "1" true +check_one_counter omarkcounter "1" true +check_one_counter ilastyearcounter "0" true + +if [ $ret -eq 0 ];then + echo "OK: nftables meta iif/oif counters at expected values" +else + exit $ret +fi + +#First CPU execution and counter +taskset -p 01 $$ > /dev/null +ip netns exec "$ns0" nft reset counters > /dev/null +ip netns exec "$ns0" ping -q -c 1 127.0.0.1 > /dev/null +check_one_counter icpu0counter "2" true + +if [ $ret -eq 0 ];then + echo "OK: nftables meta cpu counter at expected values" +fi + +exit $ret diff --git a/tools/testing/selftests/net/netfilter/nft_nat.sh b/tools/testing/selftests/net/netfilter/nft_nat.sh new file mode 100755 index 0000000000..9e39de2645 --- /dev/null +++ b/tools/testing/selftests/net/netfilter/nft_nat.sh @@ -0,0 +1,1156 @@ +#!/bin/bash +# +# This test is for basic NAT functionality: snat, dnat, redirect, masquerade. +# + +source lib.sh + +ret=0 +test_inet_nat=true + +checktool "nft --version" "run test without nft tool" +checktool "socat -h" "run test without socat" + +cleanup() +{ + ip netns pids "$ns0" | xargs kill 2>/dev/null + ip netns pids "$ns1" | xargs kill 2>/dev/null + ip netns pids "$ns2" | xargs kill 2>/dev/null + + rm -f "$INFILE" "$OUTFILE" + + cleanup_all_ns +} + +trap cleanup EXIT + +INFILE=$(mktemp) +OUTFILE=$(mktemp) + +setup_ns ns0 ns1 ns2 + +if ! ip link add veth0 netns "$ns0" type veth peer name eth0 netns "$ns1" > /dev/null 2>&1;then + echo "SKIP: No virtual ethernet pair device support in kernel" + exit $ksft_skip +fi +ip link add veth1 netns "$ns0" type veth peer name eth0 netns "$ns2" + +ip -net "$ns0" link set veth0 up +ip -net "$ns0" addr add 10.0.1.1/24 dev veth0 +ip -net "$ns0" addr add dead:1::1/64 dev veth0 nodad + +ip -net "$ns0" link set veth1 up +ip -net "$ns0" addr add 10.0.2.1/24 dev veth1 +ip -net "$ns0" addr add dead:2::1/64 dev veth1 nodad + +do_config() +{ + ns="$1" + subnet="$2" + + ip -net "$ns" link set eth0 up + ip -net "$ns" addr add "10.0.$subnet.99/24" dev eth0 + ip -net "$ns" route add default via "10.0.$subnet.1" + ip -net "$ns" addr add "dead:$subnet::99/64" dev eth0 nodad + ip -net "$ns" route add default via "dead:$subnet::1" +} + +do_config "$ns1" 1 +do_config "$ns2" 2 + +bad_counter() +{ + local ns=$1 + local counter=$2 + local expect=$3 + local tag=$4 + + echo "ERROR: $counter counter in $ns has unexpected value (expected $expect) at $tag" 1>&2 + ip netns exec "$ns" nft list counter inet filter "$counter" 1>&2 +} + +check_counters() +{ + ns=$1 + local lret=0 + + if ! ip netns exec "$ns" nft list counter inet filter ns0in | grep -q "packets 1 bytes 84";then + bad_counter "$ns" ns0in "packets 1 bytes 84" "check_counters 1" + lret=1 + fi + + if ! ip netns exec "$ns" nft list counter inet filter ns0out | grep -q "packets 1 bytes 84";then + bad_counter "$ns" ns0out "packets 1 bytes 84" "check_counters 2" + lret=1 + fi + + expect="packets 1 bytes 104" + if ! ip netns exec "$ns" nft list counter inet filter ns0in6 | grep -q "$expect";then + bad_counter "$ns" ns0in6 "$expect" "check_counters 3" + lret=1 + fi + if ! ip netns exec "$ns" nft list counter inet filter ns0out6 | grep -q "$expect";then + bad_counter "$ns" ns0out6 "$expect" "check_counters 4" + lret=1 + fi + + return $lret +} + +check_ns0_counters() +{ + local ns=$1 + local lret=0 + + if ! ip netns exec "$ns0" nft list counter inet filter ns0in | grep -q "packets 0 bytes 0";then + bad_counter "$ns0" ns0in "packets 0 bytes 0" "check_ns0_counters 1" + lret=1 + fi + + if ! ip netns exec "$ns0" nft list counter inet filter ns0in6 | grep -q "packets 0 bytes 0";then + bad_counter "$ns0" ns0in6 "packets 0 bytes 0" + lret=1 + fi + + if ! ip netns exec "$ns0" nft list counter inet filter ns0out | grep -q "packets 0 bytes 0";then + bad_counter "$ns0" ns0out "packets 0 bytes 0" "check_ns0_counters 2" + lret=1 + fi + if ! ip netns exec "$ns0" nft list counter inet filter ns0out6 | grep -q "packets 0 bytes 0";then + bad_counter "$ns0" ns0out6 "packets 0 bytes 0" "check_ns0_counters3 " + lret=1 + fi + + for dir in "in" "out" ; do + expect="packets 1 bytes 84" + if ! ip netns exec "$ns0" nft list counter inet filter "${ns}${dir}" | grep -q "$expect";then + bad_counter "$ns0" "$ns${dir}" "$expect" "check_ns0_counters 4" + lret=1 + fi + + expect="packets 1 bytes 104" + if ! ip netns exec "$ns0" nft list counter inet filter "${ns}${dir}6" | grep -q "$expect";then + bad_counter "$ns0" "$ns${dir}6" "$expect" "check_ns0_counters 5" + lret=1 + fi + done + + return $lret +} + +reset_counters() +{ + for i in "$ns0" "$ns1" "$ns2" ;do + ip netns exec "$i" nft reset counters inet > /dev/null + done +} + +test_local_dnat6() +{ + local family=$1 + local lret=0 + local IPF="" + + if [ "$family" = "inet" ];then + IPF="ip6" + fi + +ip netns exec "$ns0" nft -f /dev/stdin <<EOF +table $family nat { + chain output { + type nat hook output priority 0; policy accept; + ip6 daddr dead:1::99 dnat $IPF to dead:2::99 + } +} +EOF + if [ $? -ne 0 ]; then + echo "SKIP: Could not add add $family dnat hook" + return $ksft_skip + fi + + # ping netns1, expect rewrite to netns2 + if ! ip netns exec "$ns0" ping -q -c 1 dead:1::99 > /dev/null;then + lret=1 + echo "ERROR: ping6 failed" + return $lret + fi + + expect="packets 0 bytes 0" + for dir in "in6" "out6" ; do + if ! ip netns exec "$ns0" nft list counter inet filter "ns1${dir}" | grep -q "$expect";then + bad_counter "$ns0" ns1$dir "$expect" "test_local_dnat6 1" + lret=1 + fi + done + + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + if ! ip netns exec "$ns0" nft list counter inet filter "ns2${dir}" | grep -q "$expect";then + bad_counter "$ns0" ns2$dir "$expect" "test_local_dnat6 2" + lret=1 + fi + done + + # expect 0 count in ns1 + expect="packets 0 bytes 0" + for dir in "in6" "out6" ; do + if ! ip netns exec "$ns1" nft list counter inet filter "ns0${dir}" | grep -q "$expect";then + bad_counter "$ns1" ns0$dir "$expect" "test_local_dnat6 3" + lret=1 + fi + done + + # expect 1 packet in ns2 + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + if ! ip netns exec "$ns2" nft list counter inet filter "ns0${dir}" | grep -q "$expect";then + bad_counter "$ns2" ns0$dir "$expect" "test_local_dnat6 4" + lret=1 + fi + done + + test $lret -eq 0 && echo "PASS: ipv6 ping to $ns1 was $family NATted to $ns2" + ip netns exec "$ns0" nft flush chain ip6 nat output + + return $lret +} + +test_local_dnat() +{ + local family=$1 + local lret=0 + local IPF="" + + if [ "$family" = "inet" ];then + IPF="ip" + fi + +ip netns exec "$ns0" nft -f /dev/stdin <<EOF 2>/dev/null +table $family nat { + chain output { + type nat hook output priority 0; policy accept; + ip daddr 10.0.1.99 dnat $IPF to 10.0.2.99 + } +} +EOF + if [ $? -ne 0 ]; then + if [ "$family" = "inet" ];then + echo "SKIP: inet nat tests" + test_inet_nat=false + return $ksft_skip + fi + echo "SKIP: Could not add add $family dnat hook" + return $ksft_skip + fi + + # ping netns1, expect rewrite to netns2 + if ! ip netns exec "$ns0" ping -q -c 1 10.0.1.99 > /dev/null;then + lret=1 + echo "ERROR: ping failed" + return $lret + fi + + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + if ! ip netns exec "$ns0" nft list counter inet filter "ns1${dir}" | grep -q "$expect";then + bad_counter "$ns0" "ns1$dir" "$expect" "test_local_dnat 1" + lret=1 + fi + done + + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + if ! ip netns exec "$ns0" nft list counter inet filter "ns2${dir}" | grep -q "$expect";then + bad_counter "$ns0" "ns2$dir" "$expect" "test_local_dnat 2" + lret=1 + fi + done + + # expect 0 count in ns1 + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + if ! ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect";then + bad_counter "$ns1" "ns0$dir" "$expect" "test_local_dnat 3" + lret=1 + fi + done + + # expect 1 packet in ns2 + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + if ! ip netns exec "$ns2" nft list counter inet filter ns0${dir} | grep -q "$expect";then + bad_counter "$ns2" "ns0$dir" "$expect" "test_local_dnat 4" + lret=1 + fi + done + + test $lret -eq 0 && echo "PASS: ping to $ns1 was $family NATted to $ns2" + + ip netns exec "$ns0" nft flush chain "$family" nat output + + reset_counters + if ! ip netns exec "$ns0" ping -q -c 1 10.0.1.99 > /dev/null;then + lret=1 + echo "ERROR: ping failed" + return $lret + fi + + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + if ! ip netns exec "$ns0" nft list counter inet filter "ns1${dir}" | grep -q "$expect";then + bad_counter "$ns1" ns1$dir "$expect" "test_local_dnat 5" + lret=1 + fi + done + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + if ! ip netns exec "$ns0" nft list counter inet filter "ns2${dir}" | grep -q "$expect";then + bad_counter "$ns0" ns2$dir "$expect" "test_local_dnat 6" + lret=1 + fi + done + + # expect 1 count in ns1 + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + if ! ip netns exec "$ns1" nft list counter inet filter "ns0${dir}" | grep -q "$expect";then + bad_counter "$ns0" ns0$dir "$expect" "test_local_dnat 7" + lret=1 + fi + done + + # expect 0 packet in ns2 + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + if ! ip netns exec "$ns2" nft list counter inet filter "ns0${dir}" | grep -q "$expect";then + bad_counter "$ns2" ns0$dir "$expect" "test_local_dnat 8" + lret=1 + fi + done + + test $lret -eq 0 && echo "PASS: ping to $ns1 OK after $family nat output chain flush" + + return $lret +} + +listener_ready() +{ + local ns="$1" + local port="$2" + local proto="$3" + ss -N "$ns" -ln "$proto" -o "sport = :$port" | grep -q "$port" +} + +test_local_dnat_portonly() +{ + local family=$1 + local daddr=$2 + local lret=0 + +ip netns exec "$ns0" nft -f /dev/stdin <<EOF +table $family nat { + chain output { + type nat hook output priority 0; policy accept; + meta l4proto tcp dnat to :2000 + + } +} +EOF + if [ $? -ne 0 ]; then + if [ "$family" = "inet" ];then + echo "SKIP: inet port test" + test_inet_nat=false + return + fi + echo "SKIP: Could not add $family dnat hook" + return + fi + + echo "SERVER-$family" | ip netns exec "$ns1" timeout 3 socat -u STDIN TCP-LISTEN:2000 & + + busywait $BUSYWAIT_TIMEOUT listener_ready "$ns1" 2000 "-t" + + result=$(ip netns exec "$ns0" timeout 1 socat -u TCP:"$daddr":2000 STDOUT) + + if [ "$result" = "SERVER-inet" ];then + echo "PASS: inet port rewrite without l3 address" + else + echo "ERROR: inet port rewrite without l3 address, got $result" + ret=1 + fi +} + +test_masquerade6() +{ + local family=$1 + local natflags=$2 + local lret=0 + + ip netns exec "$ns0" sysctl net.ipv6.conf.all.forwarding=1 > /dev/null + + if ! ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null;then + echo "ERROR: cannot ping $ns1 from $ns2 via ipv6" + return 1 + fi + + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + if ! ip netns exec "$ns1" nft list counter inet filter "ns2${dir}" | grep -q "$expect";then + bad_counter "$ns1" "ns2$dir" "$expect" "test_masquerade6 1" + lret=1 + fi + + if ! ip netns exec "$ns2" nft list counter inet filter "ns1${dir}" | grep -q "$expect";then + bad_counter "$ns2" "ns1$dir" "$expect" "test_masquerade6 2" + lret=1 + fi + done + + reset_counters + +# add masquerading rule +ip netns exec "$ns0" nft -f /dev/stdin <<EOF +table $family nat { + chain postrouting { + type nat hook postrouting priority 0; policy accept; + meta oif veth0 masquerade $natflags + } +} +EOF + if [ $? -ne 0 ]; then + echo "SKIP: Could not add add $family masquerade hook" + return $ksft_skip + fi + + if ! ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null;then + echo "ERROR: cannot ping $ns1 from $ns2 with active $family masquerade $natflags" + lret=1 + fi + + # ns1 should have seen packets from ns0, due to masquerade + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + if ! ip netns exec "$ns1" nft list counter inet filter "ns0${dir}" | grep -q "$expect";then + bad_counter "$ns1" ns0$dir "$expect" "test_masquerade6 3" + lret=1 + fi + + if ! ip netns exec "$ns2" nft list counter inet filter "ns1${dir}" | grep -q "$expect";then + bad_counter "$ns2" ns1$dir "$expect" "test_masquerade6 4" + lret=1 + fi + done + + # ns1 should not have seen packets from ns2, due to masquerade + expect="packets 0 bytes 0" + for dir in "in6" "out6" ; do + if ! ip netns exec "$ns1" nft list counter inet filter "ns2${dir}" | grep -q "$expect";then + bad_counter "$ns1" ns0$dir "$expect" "test_masquerade6 5" + lret=1 + fi + + if ! ip netns exec "$ns0" nft list counter inet filter "ns1${dir}" | grep -q "$expect";then + bad_counter "$ns0" "ns1$dir" "$expect" "test_masquerade6 6" + lret=1 + fi + done + + if ! ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null;then + echo "ERROR: cannot ping $ns1 from $ns2 with active ipv6 masquerade $natflags (attempt 2)" + lret=1 + fi + + if ! ip netns exec "$ns0" nft flush chain "$family" nat postrouting;then + echo "ERROR: Could not flush $family nat postrouting" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: $family IPv6 masquerade $natflags for $ns2" + + return $lret +} + +test_masquerade() +{ + local family=$1 + local natflags=$2 + local lret=0 + + ip netns exec "$ns0" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null + ip netns exec "$ns0" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null + + if ! ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null;then + echo "ERROR: cannot ping $ns1 from $ns2 $natflags" + lret=1 + fi + + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + if ! ip netns exec "$ns1" nft list counter inet filter "ns2${dir}" | grep -q "$expect";then + bad_counter "$ns1" "ns2$dir" "$expect" "test_masquerade 1" + lret=1 + fi + + if ! ip netns exec "$ns2" nft list counter inet filter "ns1${dir}" | grep -q "$expect";then + bad_counter "$ns2" "ns1$dir" "$expect" "test_masquerade 2" + lret=1 + fi + done + + reset_counters + +# add masquerading rule +ip netns exec "$ns0" nft -f /dev/stdin <<EOF +table $family nat { + chain postrouting { + type nat hook postrouting priority 0; policy accept; + meta oif veth0 masquerade $natflags + } +} +EOF + if [ $? -ne 0 ]; then + echo "SKIP: Could not add add $family masquerade hook" + return $ksft_skip + fi + + if ! ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null;then + echo "ERROR: cannot ping $ns1 from $ns2 with active $family masquerade $natflags" + lret=1 + fi + + # ns1 should have seen packets from ns0, due to masquerade + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + if ! ip netns exec "$ns1" nft list counter inet filter "ns0${dir}" | grep -q "$expect";then + bad_counter "$ns1" "ns0$dir" "$expect" "test_masquerade 3" + lret=1 + fi + + if ! ip netns exec "$ns2" nft list counter inet filter "ns1${dir}" | grep -q "$expect";then + bad_counter "$ns2" "ns1$dir" "$expect" "test_masquerade 4" + lret=1 + fi + done + + # ns1 should not have seen packets from ns2, due to masquerade + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + if ! ip netns exec "$ns1" nft list counter inet filter "ns2${dir}" | grep -q "$expect";then + bad_counter "$ns1" "ns0$dir" "$expect" "test_masquerade 5" + lret=1 + fi + + if ! ip netns exec "$ns0" nft list counter inet filter "ns1${dir}" | grep -q "$expect";then + bad_counter "$ns0" "ns1$dir" "$expect" "test_masquerade 6" + lret=1 + fi + done + + if ! ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null;then + echo "ERROR: cannot ping $ns1 from $ns2 with active ip masquerade $natflags (attempt 2)" + lret=1 + fi + + if ! ip netns exec "$ns0" nft flush chain "$family" nat postrouting; then + echo "ERROR: Could not flush $family nat postrouting" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: $family IP masquerade $natflags for $ns2" + + return $lret +} + +test_redirect6() +{ + local family=$1 + local lret=0 + + ip netns exec "$ns0" sysctl net.ipv6.conf.all.forwarding=1 > /dev/null + + if ! ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null;then + echo "ERROR: cannnot ping $ns1 from $ns2 via ipv6" + lret=1 + fi + + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + if ! ip netns exec "$ns1" nft list counter inet filter "ns2${dir}" | grep -q "$expect";then + bad_counter "$ns1" ns2$dir "$expect" "test_redirect6 1" + lret=1 + fi + + if ! ip netns exec "$ns2" nft list counter inet filter "ns1${dir}" | grep -q "$expect";then + bad_counter "$ns2" ns1$dir "$expect" "test_redirect6 2" + lret=1 + fi + done + + reset_counters + +# add redirect rule +ip netns exec "$ns0" nft -f /dev/stdin <<EOF +table $family nat { + chain prerouting { + type nat hook prerouting priority 0; policy accept; + meta iif veth1 meta l4proto icmpv6 ip6 saddr dead:2::99 ip6 daddr dead:1::99 redirect + } +} +EOF + if [ $? -ne 0 ]; then + echo "SKIP: Could not add add $family redirect hook" + return $ksft_skip + fi + + if ! ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null;then + echo "ERROR: cannot ping $ns1 from $ns2 via ipv6 with active $family redirect" + lret=1 + fi + + # ns1 should have seen no packets from ns2, due to redirection + expect="packets 0 bytes 0" + for dir in "in6" "out6" ; do + if ! ip netns exec "$ns1" nft list counter inet filter "ns2${dir}" | grep -q "$expect";then + bad_counter "$ns1" ns0$dir "$expect" "test_redirect6 3" + lret=1 + fi + done + + # ns0 should have seen packets from ns2, due to masquerade + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + if ! ip netns exec "$ns0" nft list counter inet filter "ns2${dir}" | grep -q "$expect";then + bad_counter "$ns1" ns0$dir "$expect" "test_redirect6 4" + lret=1 + fi + done + + if ! ip netns exec "$ns0" nft delete table "$family" nat;then + echo "ERROR: Could not delete $family nat table" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: $family IPv6 redirection for $ns2" + + return $lret +} + +test_redirect() +{ + local family=$1 + local lret=0 + + ip netns exec "$ns0" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null + ip netns exec "$ns0" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null + + if ! ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null;then + echo "ERROR: cannot ping $ns1 from $ns2" + lret=1 + fi + + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + if ! ip netns exec "$ns1" nft list counter inet filter "ns2${dir}" | grep -q "$expect";then + bad_counter "$ns1" "$ns2$dir" "$expect" "test_redirect 1" + lret=1 + fi + + if ! ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect";then + bad_counter "$ns2" ns1$dir "$expect" "test_redirect 2" + lret=1 + fi + done + + reset_counters + +# add redirect rule +ip netns exec "$ns0" nft -f /dev/stdin <<EOF +table $family nat { + chain prerouting { + type nat hook prerouting priority 0; policy accept; + meta iif veth1 ip protocol icmp ip saddr 10.0.2.99 ip daddr 10.0.1.99 redirect + } +} +EOF + if [ $? -ne 0 ]; then + echo "SKIP: Could not add add $family redirect hook" + return $ksft_skip + fi + + if ! ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null;then + echo "ERROR: cannot ping $ns1 from $ns2 with active $family ip redirect" + lret=1 + fi + + # ns1 should have seen no packets from ns2, due to redirection + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + + if ! ip netns exec "$ns1" nft list counter inet filter "ns2${dir}" | grep -q "$expect";then + bad_counter "$ns1" ns0$dir "$expect" "test_redirect 3" + lret=1 + fi + done + + # ns0 should have seen packets from ns2, due to masquerade + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + if ! ip netns exec "$ns0" nft list counter inet filter "ns2${dir}" | grep -q "$expect";then + bad_counter "$ns0" ns0$dir "$expect" "test_redirect 4" + lret=1 + fi + done + + if ! ip netns exec "$ns0" nft delete table "$family" nat;then + echo "ERROR: Could not delete $family nat table" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: $family IP redirection for $ns2" + + return $lret +} + +# test port shadowing. +# create two listening services, one on router (ns0), one +# on client (ns2), which is masqueraded from ns1 point of view. +# ns2 sends udp packet coming from service port to ns1, on a highport. +# Later, if n1 uses same highport to connect to ns0:service, packet +# might be port-forwarded to ns2 instead. + +# second argument tells if we expect the 'fake-entry' to take effect +# (CLIENT) or not (ROUTER). +test_port_shadow() +{ + local test=$1 + local expect=$2 + local daddrc="10.0.1.99" + local daddrs="10.0.1.1" + local result="" + local logmsg="" + + # make shadow entry, from client (ns2), going to (ns1), port 41404, sport 1405. + echo "fake-entry" | ip netns exec "$ns2" timeout 1 socat -u STDIN UDP:"$daddrc":41404,sourceport=1405 + + echo ROUTER | ip netns exec "$ns0" timeout 3 socat -T 3 -u STDIN UDP4-LISTEN:1405 2>/dev/null & + local sc_r=$! + echo CLIENT | ip netns exec "$ns2" timeout 3 socat -T 3 -u STDIN UDP4-LISTEN:1405,reuseport 2>/dev/null & + local sc_c=$! + + busywait $BUSYWAIT_TIMEOUT listener_ready "$ns0" 1405 "-u" + busywait $BUSYWAIT_TIMEOUT listener_ready "$ns2" 1405 "-u" + + # ns1 tries to connect to ns0:1405. With default settings this should connect + # to client, it matches the conntrack entry created above. + + result=$(echo "data" | ip netns exec "$ns1" timeout 1 socat - UDP:"$daddrs":1405,sourceport=41404) + + if [ "$result" = "$expect" ] ;then + echo "PASS: portshadow test $test: got reply from ${expect}${logmsg}" + else + echo "ERROR: portshadow test $test: got reply from \"$result\", not $expect as intended" + ret=1 + fi + + kill $sc_r $sc_c 2>/dev/null + + # flush udp entries for next test round, if any + ip netns exec "$ns0" conntrack -F >/dev/null 2>&1 +} + +# This prevents port shadow of router service via packet filter, +# packets claiming to originate from service port from internal +# network are dropped. +test_port_shadow_filter() +{ + local family=$1 + +ip netns exec "$ns0" nft -f /dev/stdin <<EOF +table $family filter { + chain forward { + type filter hook forward priority 0; policy accept; + meta iif veth1 udp sport 1405 drop + } +} +EOF + test_port_shadow "port-filter" "ROUTER" + + ip netns exec "$ns0" nft delete table "$family" filter +} + +# This prevents port shadow of router service via notrack. +test_port_shadow_notrack() +{ + local family=$1 + +ip netns exec "$ns0" nft -f /dev/stdin <<EOF +table $family raw { + chain prerouting { + type filter hook prerouting priority -300; policy accept; + meta iif veth0 udp dport 1405 notrack + } + chain output { + type filter hook output priority -300; policy accept; + meta oif veth0 udp sport 1405 notrack + } +} +EOF + test_port_shadow "port-notrack" "ROUTER" + + ip netns exec "$ns0" nft delete table "$family" raw +} + +# This prevents port shadow of router service via sport remap. +test_port_shadow_pat() +{ + local family=$1 + +ip netns exec "$ns0" nft -f /dev/stdin <<EOF +table $family pat { + chain postrouting { + type nat hook postrouting priority -1; policy accept; + meta iif veth1 udp sport <= 1405 masquerade to : 1406-65535 random + } +} +EOF + test_port_shadow "pat" "ROUTER" + + ip netns exec "$ns0" nft delete table "$family" pat +} + +test_port_shadowing() +{ + local family="ip" + + if ! conntrack -h >/dev/null 2>&1;then + echo "SKIP: Could not run nat port shadowing test without conntrack tool" + return + fi + + if ! socat -h > /dev/null 2>&1;then + echo "SKIP: Could not run nat port shadowing test without socat tool" + return + fi + + ip netns exec "$ns0" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null + ip netns exec "$ns0" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null + + ip netns exec "$ns0" nft -f /dev/stdin <<EOF +table $family nat { + chain postrouting { + type nat hook postrouting priority 0; policy accept; + meta oif veth0 masquerade + } +} +EOF + if [ $? -ne 0 ]; then + echo "SKIP: Could not add add $family masquerade hook" + return $ksft_skip + fi + + # test default behaviour. Packet from ns1 to ns0 is redirected to ns2. + test_port_shadow "default" "CLIENT" + + # test packet filter based mitigation: prevent forwarding of + # packets claiming to come from the service port. + test_port_shadow_filter "$family" + + # test conntrack based mitigation: connections going or coming + # from router:service bypass connection tracking. + test_port_shadow_notrack "$family" + + # test nat based mitigation: fowarded packets coming from service port + # are masqueraded with random highport. + test_port_shadow_pat "$family" + + ip netns exec "$ns0" nft delete table $family nat +} + +test_stateless_nat_ip() +{ + local lret=0 + + ip netns exec "$ns0" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null + ip netns exec "$ns0" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null + + if ! ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null;then + echo "ERROR: cannot ping $ns1 from $ns2 before loading stateless rules" + return 1 + fi + +ip netns exec "$ns0" nft -f /dev/stdin <<EOF +table ip stateless { + map xlate_in { + typeof meta iifname . ip saddr . ip daddr : ip daddr + elements = { + "veth1" . 10.0.2.99 . 10.0.1.99 : 10.0.2.2, + } + } + map xlate_out { + typeof meta iifname . ip saddr . ip daddr : ip daddr + elements = { + "veth0" . 10.0.1.99 . 10.0.2.2 : 10.0.2.99 + } + } + + chain prerouting { + type filter hook prerouting priority -400; policy accept; + ip saddr set meta iifname . ip saddr . ip daddr map @xlate_in + ip daddr set meta iifname . ip saddr . ip daddr map @xlate_out + } +} +EOF + if [ $? -ne 0 ]; then + echo "SKIP: Could not add ip statless rules" + return $ksft_skip + fi + + reset_counters + + if ! ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null; then + echo "ERROR: cannot ping $ns1 from $ns2 with stateless rules" + lret=1 + fi + + # ns1 should have seen packets from .2.2, due to stateless rewrite. + expect="packets 1 bytes 84" + if ! ip netns exec "$ns1" nft list counter inet filter ns0insl | grep -q "$expect";then + bad_counter "$ns1" ns0insl "$expect" "test_stateless 1" + lret=1 + fi + + for dir in "in" "out" ; do + if ! ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect";then + bad_counter "$ns2" ns1$dir "$expect" "test_stateless 2" + lret=1 + fi + done + + # ns1 should not have seen packets from ns2, due to masquerade + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + if ! ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect";then + bad_counter "$ns1" ns0$dir "$expect" "test_stateless 3" + lret=1 + fi + + if ! ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect";then + bad_counter "$ns0" ns1$dir "$expect" "test_stateless 4" + lret=1 + fi + done + + reset_counters + + if ! socat -h > /dev/null 2>&1;then + echo "SKIP: Could not run stateless nat frag test without socat tool" + if [ $lret -eq 0 ]; then + return $ksft_skip + fi + + ip netns exec "$ns0" nft delete table ip stateless + return $lret + fi + + dd if=/dev/urandom of="$INFILE" bs=4096 count=1 2>/dev/null + + ip netns exec "$ns1" timeout 3 socat -u UDP4-RECV:4233 OPEN:"$OUTFILE" < /dev/null 2>/dev/null & + + busywait $BUSYWAIT_TIMEOUT listener_ready "$ns1" 4233 "-u" + + # re-do with large ping -> ip fragmentation + if ! ip netns exec "$ns2" timeout 3 socat -u STDIN UDP4-SENDTO:"10.0.1.99:4233" < "$INFILE" > /dev/null;then + echo "ERROR: failed to test udp $ns1 to $ns2 with stateless ip nat" 1>&2 + lret=1 + fi + + wait + + if ! cmp "$INFILE" "$OUTFILE";then + ls -l "$INFILE" "$OUTFILE" + echo "ERROR: in and output file mismatch when checking udp with stateless nat" 1>&2 + lret=1 + fi + + :> "$OUTFILE" + + # ns1 should have seen packets from 2.2, due to stateless rewrite. + expect="packets 3 bytes 4164" + if ! ip netns exec "$ns1" nft list counter inet filter ns0insl | grep -q "$expect";then + bad_counter "$ns1" ns0insl "$expect" "test_stateless 5" + lret=1 + fi + + if ! ip netns exec "$ns0" nft delete table ip stateless; then + echo "ERROR: Could not delete table ip stateless" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: IP statless for $ns2" + + return $lret +} + +# ip netns exec "$ns0" ping -c 1 -q 10.0.$i.99 +for i in "$ns0" "$ns1" "$ns2" ;do +ip netns exec "$i" nft -f /dev/stdin <<EOF +table inet filter { + counter ns0in {} + counter ns1in {} + counter ns2in {} + + counter ns0out {} + counter ns1out {} + counter ns2out {} + + counter ns0in6 {} + counter ns1in6 {} + counter ns2in6 {} + + counter ns0out6 {} + counter ns1out6 {} + counter ns2out6 {} + + map nsincounter { + type ipv4_addr : counter + elements = { 10.0.1.1 : "ns0in", + 10.0.2.1 : "ns0in", + 10.0.1.99 : "ns1in", + 10.0.2.99 : "ns2in" } + } + + map nsincounter6 { + type ipv6_addr : counter + elements = { dead:1::1 : "ns0in6", + dead:2::1 : "ns0in6", + dead:1::99 : "ns1in6", + dead:2::99 : "ns2in6" } + } + + map nsoutcounter { + type ipv4_addr : counter + elements = { 10.0.1.1 : "ns0out", + 10.0.2.1 : "ns0out", + 10.0.1.99: "ns1out", + 10.0.2.99: "ns2out" } + } + + map nsoutcounter6 { + type ipv6_addr : counter + elements = { dead:1::1 : "ns0out6", + dead:2::1 : "ns0out6", + dead:1::99 : "ns1out6", + dead:2::99 : "ns2out6" } + } + + chain input { + type filter hook input priority 0; policy accept; + counter name ip saddr map @nsincounter + icmpv6 type { "echo-request", "echo-reply" } counter name ip6 saddr map @nsincounter6 + } + chain output { + type filter hook output priority 0; policy accept; + counter name ip daddr map @nsoutcounter + icmpv6 type { "echo-request", "echo-reply" } counter name ip6 daddr map @nsoutcounter6 + } +} +EOF +done + +# special case for stateless nat check, counter needs to +# be done before (input) ip defragmentation +ip netns exec "$ns1" nft -f /dev/stdin <<EOF +table inet filter { + counter ns0insl {} + + chain pre { + type filter hook prerouting priority -400; policy accept; + ip saddr 10.0.2.2 counter name "ns0insl" + } +} +EOF + +ping_basic() +{ + i="$1" + if ! ip netns exec "$ns0" ping -c 1 -q 10.0."$i".99 > /dev/null;then + echo "ERROR: Could not reach other namespace(s)" 1>&2 + ret=1 + fi + + if ! ip netns exec "$ns0" ping -c 1 -q dead:"$i"::99 > /dev/null;then + echo "ERROR: Could not reach other namespace(s) via ipv6" 1>&2 + ret=1 + fi +} + +test_basic_conn() +{ + local nsexec + name="$1" + + nsexec=$(eval echo \$"$1") + + ping_basic 1 + ping_basic 2 + + if ! check_counters "$nsexec";then + return 1 + fi + + if ! check_ns0_counters "$name";then + return 1 + fi + + reset_counters + return 0 +} + +if ! test_basic_conn "ns1" ; then + echo "ERROR: basic test for ns1 failed" 1>&2 + exit 1 +fi +if ! test_basic_conn "ns2"; then + echo "ERROR: basic test for ns1 failed" 1>&2 +fi + +if [ $ret -eq 0 ];then + echo "PASS: netns routing/connectivity: $ns0 can reach $ns1 and $ns2" +fi + +reset_counters +test_local_dnat ip +test_local_dnat6 ip6 + +reset_counters +test_local_dnat_portonly inet 10.0.1.99 + +reset_counters +$test_inet_nat && test_local_dnat inet +$test_inet_nat && test_local_dnat6 inet + +for flags in "" "fully-random"; do +reset_counters +test_masquerade ip $flags +test_masquerade6 ip6 $flags +reset_counters +$test_inet_nat && test_masquerade inet $flags +$test_inet_nat && test_masquerade6 inet $flags +done + +reset_counters +test_redirect ip +test_redirect6 ip6 +reset_counters +$test_inet_nat && test_redirect inet +$test_inet_nat && test_redirect6 inet + +test_port_shadowing +test_stateless_nat_ip + +if [ $ret -ne 0 ];then + echo -n "FAIL: " + nft --version +fi + +exit $ret diff --git a/tools/testing/selftests/net/netfilter/nft_nat_zones.sh b/tools/testing/selftests/net/netfilter/nft_nat_zones.sh new file mode 100755 index 0000000000..3b81d88bdd --- /dev/null +++ b/tools/testing/selftests/net/netfilter/nft_nat_zones.sh @@ -0,0 +1,267 @@ +#!/bin/bash +# +# Test connection tracking zone and NAT source port reallocation support. +# + +source lib.sh + +# Don't increase too much, 2000 clients should work +# just fine but script can then take several minutes with +# KASAN/debug builds. +maxclients=100 + +have_socat=0 +ret=0 + +[ "$KSFT_MACHINE_SLOW" = yes ] && maxclients=40 +# client1---. +# veth1-. +# | +# NAT Gateway --veth0--> Server +# | | +# veth2-' | +# client2---' | +# .... | +# clientX----vethX---' + +# All clients share identical IP address. +# NAT Gateway uses policy routing and conntrack zones to isolate client +# namespaces. Each client connects to Server, each with colliding tuples: +# clientsaddr:10000 -> serveraddr:dport +# NAT Gateway is supposed to do port reallocation for each of the +# connections. + +v4gc1=$(sysctl -n net.ipv4.neigh.default.gc_thresh1 2>/dev/null) +v4gc2=$(sysctl -n net.ipv4.neigh.default.gc_thresh2 2>/dev/null) +v4gc3=$(sysctl -n net.ipv4.neigh.default.gc_thresh3 2>/dev/null) +v6gc1=$(sysctl -n net.ipv6.neigh.default.gc_thresh1 2>/dev/null) +v6gc2=$(sysctl -n net.ipv6.neigh.default.gc_thresh2 2>/dev/null) +v6gc3=$(sysctl -n net.ipv6.neigh.default.gc_thresh3 2>/dev/null) + +cleanup() +{ + cleanup_all_ns + + sysctl -q net.ipv4.neigh.default.gc_thresh1="$v4gc1" 2>/dev/null + sysctl -q net.ipv4.neigh.default.gc_thresh2="$v4gc2" 2>/dev/null + sysctl -q net.ipv4.neigh.default.gc_thresh3="$v4gc3" 2>/dev/null + sysctl -q net.ipv6.neigh.default.gc_thresh1="$v6gc1" 2>/dev/null + sysctl -q net.ipv6.neigh.default.gc_thresh2="$v6gc2" 2>/dev/null + sysctl -q net.ipv6.neigh.default.gc_thresh3="$v6gc3" 2>/dev/null +} + +checktool "nft --version" echo "run test without nft tool" +checktool "conntrack -V" "run test without conntrack tool" + +if socat -h >/dev/null 2>&1; then + have_socat=1 +fi + +setup_ns gw srv + +trap cleanup EXIT + +ip link add veth0 netns "$gw" type veth peer name eth0 netns "$srv" +ip -net "$gw" link set veth0 up +ip -net "$srv" link set eth0 up + +sysctl -q net.ipv6.neigh.default.gc_thresh1=512 2>/dev/null +sysctl -q net.ipv6.neigh.default.gc_thresh2=1024 2>/dev/null +sysctl -q net.ipv6.neigh.default.gc_thresh3=4096 2>/dev/null +sysctl -q net.ipv4.neigh.default.gc_thresh1=512 2>/dev/null +sysctl -q net.ipv4.neigh.default.gc_thresh2=1024 2>/dev/null +sysctl -q net.ipv4.neigh.default.gc_thresh3=4096 2>/dev/null + +for i in $(seq 1 "$maxclients");do + setup_ns "cl$i" + + cl=$(eval echo \$cl"$i") + if ! ip link add veth"$i" netns "$gw" type veth peer name eth0 netns "$cl" > /dev/null 2>&1;then + echo "SKIP: No virtual ethernet pair device support in kernel" + exit $ksft_skip + fi +done + +for i in $(seq 1 "$maxclients");do + cl=$(eval echo \$cl"$i") + echo netns exec "$cl" ip link set eth0 up + echo netns exec "$cl" sysctl -q net.ipv4.tcp_syn_retries=2 + echo netns exec "$gw" ip link set "veth$i" up + echo netns exec "$gw" sysctl -q net.ipv4.conf.veth"$i".arp_ignore=2 + echo netns exec "$gw" sysctl -q net.ipv4.conf.veth"$i".rp_filter=0 + + # clients have same IP addresses. + echo netns exec "$cl" ip addr add 10.1.0.3/24 dev eth0 + echo netns exec "$cl" ip addr add dead:1::3/64 dev eth0 nodad + echo netns exec "$cl" ip route add default via 10.1.0.2 dev eth0 + echo netns exec "$cl" ip route add default via dead:1::2 dev eth0 + + # NB: same addresses on client-facing interfaces. + echo netns exec "$gw" ip addr add 10.1.0.2/24 dev "veth$i" + echo netns exec "$gw" ip addr add dead:1::2/64 dev "veth$i" nodad + + # gw: policy routing + echo netns exec "$gw" ip route add 10.1.0.0/24 dev "veth$i" table $((1000+i)) + echo netns exec "$gw" ip route add dead:1::0/64 dev "veth$i" table $((1000+i)) + echo netns exec "$gw" ip route add 10.3.0.0/24 dev veth0 table $((1000+i)) + echo netns exec "$gw" ip route add dead:3::0/64 dev veth0 table $((1000+i)) + echo netns exec "$gw" ip rule add fwmark "$i" lookup $((1000+i)) +done | ip -batch /dev/stdin + +ip -net "$gw" addr add 10.3.0.1/24 dev veth0 +ip -net "$gw" addr add dead:3::1/64 dev veth0 nodad + +ip -net "$srv" addr add 10.3.0.99/24 dev eth0 +ip -net "$srv" addr add dead:3::99/64 dev eth0 nodad + +ip netns exec "$gw" nft -f /dev/stdin<<EOF +table inet raw { + map iiftomark { + type ifname : mark + } + + map iiftozone { + typeof iifname : ct zone + } + + set inicmp { + flags dynamic + type ipv4_addr . ifname . ipv4_addr + } + set inflows { + flags dynamic + type ipv4_addr . inet_service . ifname . ipv4_addr . inet_service + } + + set inflows6 { + flags dynamic + type ipv6_addr . inet_service . ifname . ipv6_addr . inet_service + } + + chain prerouting { + type filter hook prerouting priority -64000; policy accept; + ct original zone set meta iifname map @iiftozone + meta mark set meta iifname map @iiftomark + + tcp flags & (syn|ack) == ack add @inflows { ip saddr . tcp sport . meta iifname . ip daddr . tcp dport counter } + add @inflows6 { ip6 saddr . tcp sport . meta iifname . ip6 daddr . tcp dport counter } + ip protocol icmp add @inicmp { ip saddr . meta iifname . ip daddr counter } + } + + chain nat_postrouting { + type nat hook postrouting priority 0; policy accept; + ct mark set meta mark meta oifname veth0 masquerade + } + + chain mangle_prerouting { + type filter hook prerouting priority -100; policy accept; + ct direction reply meta mark set ct mark + } +} +EOF +if [ "$?" -ne 0 ];then + echo "SKIP: Could not add nftables rules" + exit $ksft_skip +fi + +( echo add element inet raw iiftomark \{ + for i in $(seq 1 $((maxclients-1))); do + echo \"veth"$i"\" : "$i", + done + echo \"veth"$maxclients"\" : "$maxclients" \} + echo add element inet raw iiftozone \{ + for i in $(seq 1 $((maxclients-1))); do + echo \"veth"$i"\" : "$i", + done + echo \"veth$maxclients\" : $maxclients \} +) | ip netns exec "$gw" nft -f /dev/stdin + +ip netns exec "$gw" sysctl -q net.ipv4.conf.all.forwarding=1 > /dev/null +ip netns exec "$gw" sysctl -q net.ipv6.conf.all.forwarding=1 > /dev/null +ip netns exec "$gw" sysctl -q net.ipv4.conf.all.rp_filter=0 >/dev/null + +# useful for debugging: allows to use 'ping' from clients to gateway. +ip netns exec "$gw" sysctl -q net.ipv4.fwmark_reflect=1 > /dev/null +ip netns exec "$gw" sysctl -q net.ipv6.fwmark_reflect=1 > /dev/null + +for i in $(seq 1 "$maxclients"); do + cl=$(eval echo \$cl"$i") + ip netns exec "$cl" ping -i 0.5 -q -c 3 10.3.0.99 > /dev/null 2>&1 & +done + +wait || ret=1 + +[ "$ret" -ne 0 ] && "FAIL: Ping failure from $cl" 1>&2 + +for i in $(seq 1 "$maxclients"); do + if ! ip netns exec "$gw" nft get element inet raw inicmp "{ 10.1.0.3 . \"veth$i\" . 10.3.0.99 }" | grep -q "{ 10.1.0.3 . \"veth$i\" . 10.3.0.99 counter packets 3 bytes 252 }"; then + ret=1 + echo "FAIL: counter icmp mismatch for veth$i" 1>&2 + ip netns exec "$gw" nft get element inet raw inicmp "{ 10.1.0.3 . \"veth$i\" . 10.3.0.99 }" 1>&2 + break + fi +done + +if ! ip netns exec "$gw" nft get element inet raw inicmp "{ 10.3.0.99 . \"veth0\" . 10.3.0.1 }" | grep -q "{ 10.3.0.99 . \"veth0\" . 10.3.0.1 counter packets $((3 * maxclients)) bytes $((252 * maxclients)) }"; then + ret=1 + echo "FAIL: counter icmp mismatch for veth0: { 10.3.0.99 . \"veth0\" . 10.3.0.1 counter packets $((3 * maxclients)) bytes $((252 * maxclients)) }" + ip netns exec "$gw" nft get element inet raw inicmp "{ 10.3.99 . \"veth0\" . 10.3.0.1 }" 1>&2 +fi + +if [ $ret -eq 0 ]; then + echo "PASS: ping test from all $maxclients namespaces" +fi + +if [ $have_socat -eq 0 ];then + echo "SKIP: socat not installed" + if [ $ret -ne 0 ];then + exit $ret + fi + exit $ksft_skip +fi + +listener_ready() +{ + ss -N "$1" -lnt -o "sport = :5201" | grep -q 5201 +} + +ip netns exec "$srv" socat -u TCP-LISTEN:5201,fork STDOUT > /dev/null 2>/dev/null & +socatpid=$! + +busywait 1000 listener_ready "$srv" + +for i in $(seq 1 "$maxclients"); do + if [ $ret -ne 0 ]; then + break + fi + cl=$(eval echo \$cl"$i") + if ! ip netns exec "$cl" socat -4 -u STDIN TCP:10.3.0.99:5201,sourceport=10000 < /dev/null > /dev/null; then + echo "FAIL: Failure to connect for $cl" 1>&2 + ip netns exec "$gw" conntrack -S 1>&2 + ret=1 + fi +done +if [ $ret -eq 0 ];then + echo "PASS: socat connections for all $maxclients net namespaces" +fi + +kill $socatpid +wait + +for i in $(seq 1 "$maxclients"); do + if ! ip netns exec "$gw" nft get element inet raw inflows "{ 10.1.0.3 . 10000 . \"veth$i\" . 10.3.0.99 . 5201 }" > /dev/null;then + ret=1 + echo "FAIL: can't find expected tcp entry for veth$i" 1>&2 + break + fi +done +if [ $ret -eq 0 ];then + echo "PASS: Found client connection for all $maxclients net namespaces" +fi + +if ! ip netns exec "$gw" nft get element inet raw inflows "{ 10.3.0.99 . 5201 . \"veth0\" . 10.3.0.1 . 10000 }" > /dev/null;then + ret=1 + echo "FAIL: cannot find return entry on veth0" 1>&2 +fi + +exit $ret diff --git a/tools/testing/selftests/net/netfilter/nft_queue.sh b/tools/testing/selftests/net/netfilter/nft_queue.sh new file mode 100755 index 0000000000..8538f08c64 --- /dev/null +++ b/tools/testing/selftests/net/netfilter/nft_queue.sh @@ -0,0 +1,417 @@ +#!/bin/bash +# +# This tests nf_queue: +# 1. can process packets from all hooks +# 2. support running nfqueue from more than one base chain +# +# shellcheck disable=SC2162,SC2317 + +source lib.sh +ret=0 +timeout=2 + +cleanup() +{ + ip netns pids "$ns1" | xargs kill 2>/dev/null + ip netns pids "$ns2" | xargs kill 2>/dev/null + ip netns pids "$nsrouter" | xargs kill 2>/dev/null + + cleanup_all_ns + + rm -f "$TMPINPUT" + rm -f "$TMPFILE0" + rm -f "$TMPFILE1" + rm -f "$TMPFILE2" "$TMPFILE3" +} + +checktool "nft --version" "test without nft tool" + +trap cleanup EXIT + +setup_ns ns1 ns2 nsrouter + +TMPFILE0=$(mktemp) +TMPFILE1=$(mktemp) +TMPFILE2=$(mktemp) +TMPFILE3=$(mktemp) + +TMPINPUT=$(mktemp) +dd conv=sparse status=none if=/dev/zero bs=1M count=200 of="$TMPINPUT" + +if ! ip link add veth0 netns "$nsrouter" type veth peer name eth0 netns "$ns1" > /dev/null 2>&1; then + echo "SKIP: No virtual ethernet pair device support in kernel" + exit $ksft_skip +fi +ip link add veth1 netns "$nsrouter" type veth peer name eth0 netns "$ns2" + +ip -net "$nsrouter" link set veth0 up +ip -net "$nsrouter" addr add 10.0.1.1/24 dev veth0 +ip -net "$nsrouter" addr add dead:1::1/64 dev veth0 nodad + +ip -net "$nsrouter" link set veth1 up +ip -net "$nsrouter" addr add 10.0.2.1/24 dev veth1 +ip -net "$nsrouter" addr add dead:2::1/64 dev veth1 nodad + +ip -net "$ns1" link set eth0 up +ip -net "$ns2" link set eth0 up + +ip -net "$ns1" addr add 10.0.1.99/24 dev eth0 +ip -net "$ns1" addr add dead:1::99/64 dev eth0 nodad +ip -net "$ns1" route add default via 10.0.1.1 +ip -net "$ns1" route add default via dead:1::1 + +ip -net "$ns2" addr add 10.0.2.99/24 dev eth0 +ip -net "$ns2" addr add dead:2::99/64 dev eth0 nodad +ip -net "$ns2" route add default via 10.0.2.1 +ip -net "$ns2" route add default via dead:2::1 + +load_ruleset() { + local name=$1 + local prio=$2 + +ip netns exec "$nsrouter" nft -f /dev/stdin <<EOF +table inet $name { + chain nfq { + ip protocol icmp queue bypass + icmpv6 type { "echo-request", "echo-reply" } queue num 1 bypass + } + chain pre { + type filter hook prerouting priority $prio; policy accept; + jump nfq + } + chain input { + type filter hook input priority $prio; policy accept; + jump nfq + } + chain forward { + type filter hook forward priority $prio; policy accept; + tcp dport 12345 queue num 2 + jump nfq + } + chain output { + type filter hook output priority $prio; policy accept; + tcp dport 12345 queue num 3 + tcp sport 23456 queue num 3 + jump nfq + } + chain post { + type filter hook postrouting priority $prio; policy accept; + jump nfq + } +} +EOF +} + +load_counter_ruleset() { + local prio=$1 + +ip netns exec "$nsrouter" nft -f /dev/stdin <<EOF +table inet countrules { + chain pre { + type filter hook prerouting priority $prio; policy accept; + counter + } + chain input { + type filter hook input priority $prio; policy accept; + counter + } + chain forward { + type filter hook forward priority $prio; policy accept; + counter + } + chain output { + type filter hook output priority $prio; policy accept; + counter + } + chain post { + type filter hook postrouting priority $prio; policy accept; + counter + } +} +EOF +} + +test_ping() { + if ! ip netns exec "$ns1" ping -c 1 -q 10.0.2.99 > /dev/null; then + return 1 + fi + + if ! ip netns exec "$ns1" ping -c 1 -q dead:2::99 > /dev/null; then + return 2 + fi + + return 0 +} + +test_ping_router() { + if ! ip netns exec "$ns1" ping -c 1 -q 10.0.2.1 > /dev/null; then + return 3 + fi + + if ! ip netns exec "$ns1" ping -c 1 -q dead:2::1 > /dev/null; then + return 4 + fi + + return 0 +} + +test_queue_blackhole() { + local proto=$1 + +ip netns exec "$nsrouter" nft -f /dev/stdin <<EOF +table $proto blackh { + chain forward { + type filter hook forward priority 0; policy accept; + queue num 600 + } +} +EOF + if [ "$proto" = "ip" ] ;then + ip netns exec "$ns1" ping -W 2 -c 1 -q 10.0.2.99 > /dev/null + lret=$? + elif [ "$proto" = "ip6" ]; then + ip netns exec "$ns1" ping -W 2 -c 1 -q dead:2::99 > /dev/null + lret=$? + else + lret=111 + fi + + # queue without bypass keyword should drop traffic if no listener exists. + if [ "$lret" -eq 0 ];then + echo "FAIL: $proto expected failure, got $lret" 1>&2 + exit 1 + fi + + if ! ip netns exec "$nsrouter" nft delete table "$proto" blackh; then + echo "FAIL: $proto: Could not delete blackh table" + exit 1 + fi + + echo "PASS: $proto: statement with no listener results in packet drop" +} + +nf_queue_wait() +{ + local procfile="/proc/self/net/netfilter/nfnetlink_queue" + local netns id + + netns="$1" + id="$2" + + # if this file doesn't exist, nfnetlink_module isn't loaded. + # rather than loading it ourselves, wait for kernel module autoload + # completion, nfnetlink should do so automatically because nf_queue + # helper program, spawned in the background, asked for this functionality. + test -f "$procfile" && + ip netns exec "$netns" cat "$procfile" | grep -q "^ *$id " +} + +test_queue() +{ + local expected="$1" + local last="" + + # spawn nf_queue listeners + ip netns exec "$nsrouter" ./nf_queue -c -q 0 -t $timeout > "$TMPFILE0" & + ip netns exec "$nsrouter" ./nf_queue -c -q 1 -t $timeout > "$TMPFILE1" & + + busywait "$BUSYWAIT_TIMEOUT" nf_queue_wait "$nsrouter" 0 + busywait "$BUSYWAIT_TIMEOUT" nf_queue_wait "$nsrouter" 1 + + if ! test_ping;then + echo "FAIL: netns routing/connectivity with active listener on queues 0 and 1: $ret" 1>&2 + exit $ret + fi + + if ! test_ping_router;then + echo "FAIL: netns router unreachable listener on queue 0 and 1: $ret" 1>&2 + exit $ret + fi + + wait + ret=$? + + for file in $TMPFILE0 $TMPFILE1; do + last=$(tail -n1 "$file") + if [ x"$last" != x"$expected packets total" ]; then + echo "FAIL: Expected $expected packets total, but got $last" 1>&2 + ip netns exec "$nsrouter" nft list ruleset + exit 1 + fi + done + + echo "PASS: Expected and received $last" +} + +listener_ready() +{ + ss -N "$1" -lnt -o "sport = :12345" | grep -q 12345 +} + +test_tcp_forward() +{ + ip netns exec "$nsrouter" ./nf_queue -q 2 -t "$timeout" & + local nfqpid=$! + + timeout 5 ip netns exec "$ns2" socat -u TCP-LISTEN:12345 STDOUT >/dev/null & + local rpid=$! + + busywait "$BUSYWAIT_TIMEOUT" listener_ready "$ns2" + + ip netns exec "$ns1" socat -u STDIN TCP:10.0.2.99:12345 <"$TMPINPUT" >/dev/null + + wait "$rpid" && echo "PASS: tcp and nfqueue in forward chain" +} + +test_tcp_localhost() +{ + dd conv=sparse status=none if=/dev/zero bs=1M count=200 of="$TMPINPUT" + timeout 5 ip netns exec "$nsrouter" socat -u TCP-LISTEN:12345 STDOUT >/dev/null & + local rpid=$! + + ip netns exec "$nsrouter" ./nf_queue -q 3 -t "$timeout" & + local nfqpid=$! + + busywait "$BUSYWAIT_TIMEOUT" listener_ready "$nsrouter" + + ip netns exec "$nsrouter" socat -u STDIN TCP:127.0.0.1:12345 <"$TMPINPUT" >/dev/null + + wait "$rpid" && echo "PASS: tcp via loopback" + wait 2>/dev/null +} + +test_tcp_localhost_connectclose() +{ + ip netns exec "$nsrouter" ./connect_close -p 23456 -t "$timeout" & + ip netns exec "$nsrouter" ./nf_queue -q 3 -t "$timeout" & + + busywait "$BUSYWAIT_TIMEOUT" nf_queue_wait "$nsrouter" 3 + + wait && echo "PASS: tcp via loopback with connect/close" + wait 2>/dev/null +} + +test_tcp_localhost_requeue() +{ +ip netns exec "$nsrouter" nft -f /dev/stdin <<EOF +flush ruleset +table inet filter { + chain output { + type filter hook output priority 0; policy accept; + tcp dport 12345 limit rate 1/second burst 1 packets counter queue num 0 + } + chain post { + type filter hook postrouting priority 0; policy accept; + tcp dport 12345 limit rate 1/second burst 1 packets counter queue num 0 + } +} +EOF + timeout 5 ip netns exec "$nsrouter" socat -u TCP-LISTEN:12345 STDOUT >/dev/null & + local rpid=$! + + ip netns exec "$nsrouter" ./nf_queue -c -q 1 -t "$timeout" > "$TMPFILE2" & + + # nfqueue 1 will be called via output hook. But this time, + # re-queue the packet to nfqueue program on queue 2. + ip netns exec "$nsrouter" ./nf_queue -G -d 150 -c -q 0 -Q 1 -t "$timeout" > "$TMPFILE3" & + + busywait "$BUSYWAIT_TIMEOUT" listener_ready "$nsrouter" + ip netns exec "$nsrouter" socat -u STDIN TCP:127.0.0.1:12345 <"$TMPINPUT" > /dev/null + + wait + + if ! diff -u "$TMPFILE2" "$TMPFILE3" ; then + echo "FAIL: lost packets during requeue?!" 1>&2 + return + fi + + echo "PASS: tcp via loopback and re-queueing" +} + +test_icmp_vrf() { + if ! ip -net "$ns1" link add tvrf type vrf table 9876;then + echo "SKIP: Could not add vrf device" + return + fi + + ip -net "$ns1" li set eth0 master tvrf + ip -net "$ns1" li set tvrf up + + ip -net "$ns1" route add 10.0.2.0/24 via 10.0.1.1 dev eth0 table 9876 +ip netns exec "$ns1" nft -f /dev/stdin <<EOF +flush ruleset +table inet filter { + chain output { + type filter hook output priority 0; policy accept; + meta oifname "tvrf" icmp type echo-request counter queue num 1 + meta oifname "eth0" icmp type echo-request counter queue num 1 + } + chain post { + type filter hook postrouting priority 0; policy accept; + meta oifname "tvrf" icmp type echo-request counter queue num 1 + meta oifname "eth0" icmp type echo-request counter queue num 1 + } +} +EOF + ip netns exec "$ns1" ./nf_queue -q 1 -t "$timeout" & + local nfqpid=$! + + busywait "$BUSYWAIT_TIMEOUT" nf_queue_wait "$ns1" 1 + + ip netns exec "$ns1" ip vrf exec tvrf ping -c 1 10.0.2.99 > /dev/null + + for n in output post; do + for d in tvrf eth0; do + if ! ip netns exec "$ns1" nft list chain inet filter "$n" | grep -q "oifname \"$d\" icmp type echo-request counter packets 1"; then + echo "FAIL: chain $n: icmp packet counter mismatch for device $d" 1>&2 + ip netns exec "$ns1" nft list ruleset + ret=1 + return + fi + done + done + + wait "$nfqpid" && echo "PASS: icmp+nfqueue via vrf" + wait 2>/dev/null +} + +ip netns exec "$nsrouter" sysctl net.ipv6.conf.all.forwarding=1 > /dev/null +ip netns exec "$nsrouter" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null +ip netns exec "$nsrouter" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null + +load_ruleset "filter" 0 + +if test_ping; then + # queue bypass works (rules were skipped, no listener) + echo "PASS: ${ns1} can reach ${ns2}" +else + echo "FAIL: ${ns1} cannot reach ${ns2}: $ret" 1>&2 + exit $ret +fi + +test_queue_blackhole ip +test_queue_blackhole ip6 + +# dummy ruleset to add base chains between the +# queueing rules. We don't want the second reinject +# to re-execute the old hooks. +load_counter_ruleset 10 + +# we are hooking all: prerouting/input/forward/output/postrouting. +# we ping ${ns2} from ${ns1} via ${nsrouter} using ipv4 and ipv6, so: +# 1x icmp prerouting,forward,postrouting -> 3 queue events (6 incl. reply). +# 1x icmp prerouting,input,output postrouting -> 4 queue events incl. reply. +# so we expect that userspace program receives 10 packets. +test_queue 10 + +# same. We queue to a second program as well. +load_ruleset "filter2" 20 +test_queue 20 + +test_tcp_forward +test_tcp_localhost +test_tcp_localhost_connectclose +test_tcp_localhost_requeue +test_icmp_vrf + +exit $ret diff --git a/tools/testing/selftests/net/netfilter/nft_synproxy.sh b/tools/testing/selftests/net/netfilter/nft_synproxy.sh new file mode 100755 index 0000000000..293f667a6a --- /dev/null +++ b/tools/testing/selftests/net/netfilter/nft_synproxy.sh @@ -0,0 +1,96 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +source lib.sh + +ret=0 + +checktool "nft --version" "run test without nft tool" +checktool "iperf3 --version" "run test without iperf3" + +setup_ns nsr ns1 ns2 + +modprobe -q nf_conntrack + +cleanup() { + ip netns pids "$ns1" | xargs kill 2>/dev/null + ip netns pids "$ns2" | xargs kill 2>/dev/null + + cleanup_all_ns +} + +trap cleanup EXIT + +ip link add veth0 netns "$nsr" type veth peer name eth0 netns "$ns1" +ip link add veth1 netns "$nsr" type veth peer name eth0 netns "$ns2" + +for dev in veth0 veth1; do + ip -net "$nsr" link set "$dev" up +done + +ip -net "$nsr" addr add 10.0.1.1/24 dev veth0 +ip -net "$nsr" addr add 10.0.2.1/24 dev veth1 + +ip netns exec "$nsr" sysctl -q net.ipv4.conf.veth0.forwarding=1 +ip netns exec "$nsr" sysctl -q net.ipv4.conf.veth1.forwarding=1 +ip netns exec "$nsr" sysctl -q net.netfilter.nf_conntrack_tcp_loose=0 + +for n in $ns1 $ns2; do + ip -net "$n" link set eth0 up +done +ip -net "$ns1" addr add 10.0.1.99/24 dev eth0 +ip -net "$ns2" addr add 10.0.2.99/24 dev eth0 +ip -net "$ns1" route add default via 10.0.1.1 +ip -net "$ns2" route add default via 10.0.2.1 + +# test basic connectivity +if ! ip netns exec "$ns1" ping -c 1 -q 10.0.2.99 > /dev/null; then + echo "ERROR: $ns1 cannot reach $ns2" 1>&2 + exit 1 +fi + +if ! ip netns exec "$ns2" ping -c 1 -q 10.0.1.99 > /dev/null; then + echo "ERROR: $ns2 cannot reach $ns1" 1>&2 + exit 1 +fi + +ip netns exec "$ns2" iperf3 -s > /dev/null 2>&1 & +# ip netns exec $nsr tcpdump -vvv -n -i veth1 tcp | head -n 10 & + +sleep 1 + +ip netns exec "$nsr" nft -f - <<EOF +table inet filter { + chain prerouting { + type filter hook prerouting priority -300; policy accept; + meta iif veth0 tcp flags syn counter notrack + } + + chain forward { + type filter hook forward priority 0; policy accept; + + ct state new,established counter accept + + meta iif veth0 meta l4proto tcp ct state untracked,invalid synproxy mss 1460 sack-perm timestamp + + ct state invalid counter drop + + # make ns2 unreachable w.o. tcp synproxy + tcp flags syn counter drop + } +} +EOF +if [ $? -ne 0 ]; then + echo "SKIP: Cannot add nft synproxy" + exit $ksft_skip +fi + +if ! ip netns exec "$ns1" timeout 5 iperf3 -c 10.0.2.99 -n $((1 * 1024 * 1024)) > /dev/null; then + echo "FAIL: iperf3 returned an error" 1>&2 + ret=1 + ip netns exec "$nsr" nft list ruleset +else + echo "PASS: synproxy connection successful" +fi + +exit $ret diff --git a/tools/testing/selftests/net/netfilter/nft_zones_many.sh b/tools/testing/selftests/net/netfilter/nft_zones_many.sh new file mode 100755 index 0000000000..7db9982ba5 --- /dev/null +++ b/tools/testing/selftests/net/netfilter/nft_zones_many.sh @@ -0,0 +1,164 @@ +#!/bin/bash + +# Test insertion speed for packets with identical addresses/ports +# that are all placed in distinct conntrack zones. + +source lib.sh + +zones=2000 +[ "$KSFT_MACHINE_SLOW" = yes ] && zones=500 + +have_ct_tool=0 +ret=0 + +cleanup() +{ + cleanup_all_ns +} + +checktool "nft --version" "run test without nft tool" +checktool "socat -V" "run test without socat tool" + +setup_ns ns1 + +trap cleanup EXIT + +if conntrack -V > /dev/null 2>&1; then + have_ct_tool=1 +fi + +test_zones() { + local max_zones=$1 + +ip netns exec "$ns1" nft -f /dev/stdin<<EOF +flush ruleset +table inet raw { + map rndzone { + typeof numgen inc mod $max_zones : ct zone + } + + chain output { + type filter hook output priority -64000; policy accept; + udp dport 12345 ct zone set numgen inc mod 65536 map @rndzone + } +} +EOF +if [ "$?" -ne 0 ];then + echo "SKIP: Cannot add nftables rules" + exit $ksft_skip +fi + + ip netns exec "$ns1" sysctl -q net.netfilter.nf_conntrack_udp_timeout=3600 + + ( + echo "add element inet raw rndzone {" + for i in $(seq 1 "$max_zones");do + echo -n "$i : $i" + if [ "$i" -lt "$max_zones" ]; then + echo "," + else + echo "}" + fi + done + ) | ip netns exec "$ns1" nft -f /dev/stdin + + local i=0 + local j=0 + local outerstart + local stop + outerstart=$(date +%s%3N) + stop=$outerstart + + while [ "$i" -lt "$max_zones" ]; do + local start + start=$(date +%s%3N) + i=$((i + 1000)) + j=$((j + 1)) + # nft rule in output places each packet in a different zone. + dd if=/dev/zero bs=8k count=1000 2>/dev/null | ip netns exec "$ns1" socat -u STDIN UDP:127.0.0.1:12345,sourceport=12345 + if [ $? -ne 0 ] ;then + ret=1 + break + fi + + stop=$(date +%s%3N) + local duration=$((stop-start)) + echo "PASS: added 1000 entries in $duration ms (now $i total, loop $j)" + done + + if [ "$have_ct_tool" -eq 1 ]; then + local count duration + count=$(ip netns exec "$ns1" conntrack -C) + duration=$((stop-outerstart)) + + if [ "$count" -ge "$max_zones" ]; then + echo "PASS: inserted $count entries from packet path in $duration ms total" + else + ip netns exec "$ns1" conntrack -S 1>&2 + echo "FAIL: inserted $count entries from packet path in $duration ms total, expected $max_zones entries" + ret=1 + fi + fi + + if [ $ret -ne 0 ];then + echo "FAIL: insert $max_zones entries from packet path" 1>&2 + fi +} + +test_conntrack_tool() { + local max_zones=$1 + + ip netns exec "$ns1" conntrack -F >/dev/null 2>/dev/null + + local outerstart start stop i + outerstart=$(date +%s%3N) + start=$(date +%s%3N) + stop="$start" + i=0 + while [ "$i" -lt "$max_zones" ]; do + i=$((i + 1)) + ip netns exec "$ns1" conntrack -I -s 1.1.1.1 -d 2.2.2.2 --protonum 6 \ + --timeout 3600 --state ESTABLISHED --sport 12345 --dport 1000 --zone $i >/dev/null 2>&1 + if [ $? -ne 0 ];then + ip netns exec "$ns1" conntrack -I -s 1.1.1.1 -d 2.2.2.2 --protonum 6 \ + --timeout 3600 --state ESTABLISHED --sport 12345 --dport 1000 --zone $i > /dev/null + echo "FAIL: conntrack -I returned an error" + ret=1 + break + fi + + if [ $((i%1000)) -eq 0 ];then + stop=$(date +%s%3N) + + local duration=$((stop-start)) + echo "PASS: added 1000 entries in $duration ms (now $i total)" + start=$stop + fi + done + + local count + local duration + count=$(ip netns exec "$ns1" conntrack -C) + duration=$((stop-outerstart)) + + if [ "$count" -eq "$max_zones" ]; then + echo "PASS: inserted $count entries via ctnetlink in $duration ms" + else + ip netns exec "$ns1" conntrack -S 1>&2 + echo "FAIL: inserted $count entries via ctnetlink in $duration ms, expected $max_zones entries ($duration ms)" + ret=1 + fi +} + +test_zones $zones + +if [ "$have_ct_tool" -eq 1 ];then + test_conntrack_tool $zones +else + echo "SKIP: Could not run ctnetlink insertion test without conntrack tool" + if [ $ret -eq 0 ];then + exit $ksft_skip + fi +fi + +exit $ret diff --git a/tools/testing/selftests/net/netfilter/packetdrill/common.sh b/tools/testing/selftests/net/netfilter/packetdrill/common.sh new file mode 100755 index 0000000000..ed36d53519 --- /dev/null +++ b/tools/testing/selftests/net/netfilter/packetdrill/common.sh @@ -0,0 +1,33 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# for debugging set net.netfilter.nf_log_all_netns=1 in init_net +# or do not use net namespaces. +modprobe -q nf_conntrack +sysctl -q net.netfilter.nf_conntrack_log_invalid=6 + +# Flush old cached data (fastopen cookies). +ip tcp_metrics flush all > /dev/null 2>&1 + +# TCP min, default, and max receive and send buffer sizes. +sysctl -q net.ipv4.tcp_rmem="4096 540000 $((15*1024*1024))" +sysctl -q net.ipv4.tcp_wmem="4096 $((256*1024)) 4194304" + +# TCP congestion control. +sysctl -q net.ipv4.tcp_congestion_control=cubic + +# TCP slow start after idle. +sysctl -q net.ipv4.tcp_slow_start_after_idle=0 + +# TCP Explicit Congestion Notification (ECN) +sysctl -q net.ipv4.tcp_ecn=0 + +sysctl -q net.ipv4.tcp_notsent_lowat=4294967295 > /dev/null 2>&1 + +# Override the default qdisc on the tun device. +# Many tests fail with timing errors if the default +# is FQ and that paces their flows. +tc qdisc add dev tun0 root pfifo + +# Enable conntrack +$xtables -A INPUT -m conntrack --ctstate NEW -p tcp --syn diff --git a/tools/testing/selftests/net/netfilter/packetdrill/conntrack_ack_loss_stall.pkt b/tools/testing/selftests/net/netfilter/packetdrill/conntrack_ack_loss_stall.pkt new file mode 100644 index 0000000000..d755bd64c5 --- /dev/null +++ b/tools/testing/selftests/net/netfilter/packetdrill/conntrack_ack_loss_stall.pkt @@ -0,0 +1,118 @@ +// check that already-acked (retransmitted) packet is let through rather +// than tagged as INVALID. + +`packetdrill/common.sh` + +// should set -P DROP but it disconnects VM w.o. extra netns ++0 `$xtables -A INPUT -m conntrack --ctstate INVALID -j DROP` + ++0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 ++0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 ++0 bind(3, ..., ...) = 0 ++0 listen(3, 10) = 0 + ++0 < S 0:0(0) win 32792 <mss 1000> ++0 > S. 0:0(0) ack 1 <mss 1460> ++.01 < . 1:1(0) ack 1 win 65535 ++0 accept(3, ..., ...) = 4 + ++0.0001 < P. 1:1461(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 1461 win 65535 ++0.0001 < P. 1461:2921(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 2921 win 65535 ++0.0001 < P. 2921:4381(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 4381 win 65535 ++0.0001 < P. 4381:5841(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 5841 win 65535 ++0.0001 < P. 5841:7301(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 7301 win 65535 ++0.0001 < P. 7301:8761(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 8761 win 65535 ++0.0001 < P. 8761:10221(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 10221 win 65535 ++0.0001 < P. 10221:11681(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 11681 win 65535 ++0.0001 < P. 11681:13141(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 13141 win 65535 ++0.0001 < P. 13141:14601(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 14601 win 65535 ++0.0001 < P. 14601:16061(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 16061 win 65535 ++0.0001 < P. 16061:17521(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 17521 win 65535 ++0.0001 < P. 17521:18981(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 18981 win 65535 ++0.0001 < P. 18981:20441(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 20441 win 65535 ++0.0001 < P. 20441:21901(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 21901 win 65535 ++0.0001 < P. 21901:23361(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 23361 win 65535 ++0.0001 < P. 23361:24821(1460) ack 1 win 257 +0.055 > . 1:1(0) ack 24821 win 65535 ++0.0001 < P. 24821:26281(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 26281 win 65535 ++0.0001 < P. 26281:27741(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 27741 win 65535 ++0.0001 < P. 27741:29201(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 29201 win 65535 ++0.0001 < P. 29201:30661(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 30661 win 65535 ++0.0001 < P. 30661:32121(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 32121 win 65535 ++0.0001 < P. 32121:33581(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 33581 win 65535 ++0.0001 < P. 33581:35041(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 35041 win 65535 ++0.0001 < P. 35041:36501(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 36501 win 65535 ++0.0001 < P. 36501:37961(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 37961 win 65535 ++0.0001 < P. 37961:39421(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 39421 win 65535 ++0.0001 < P. 39421:40881(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 40881 win 65535 ++0.0001 < P. 40881:42341(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 42341 win 65535 ++0.0001 < P. 42341:43801(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 43801 win 65535 ++0.0001 < P. 43801:45261(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 45261 win 65535 ++0.0001 < P. 45261:46721(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 46721 win 65535 ++0.0001 < P. 46721:48181(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 48181 win 65535 ++0.0001 < P. 48181:49641(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 49641 win 65535 ++0.0001 < P. 49641:51101(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 51101 win 65535 ++0.0001 < P. 51101:52561(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 52561 win 65535 ++0.0001 < P. 52561:54021(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 54021 win 65535 ++0.0001 < P. 54021:55481(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 55481 win 65535 ++0.0001 < P. 55481:56941(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 56941 win 65535 ++0.0001 < P. 56941:58401(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 58401 win 65535 ++0.0001 < P. 58401:59861(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 59861 win 65535 ++0.0001 < P. 59861:61321(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 61321 win 65535 ++0.0001 < P. 61321:62781(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 62781 win 65535 ++0.0001 < P. 62781:64241(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 64241 win 65535 ++0.0001 < P. 64241:65701(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 65701 win 65535 ++0.0001 < P. 65701:67161(1460) ack 1 win 257 ++.0 > . 1:1(0) ack 67161 win 65535 + +// nf_ct_proto_6: SEQ is under the lower bound (already ACKed data retransmitted) IN=tun0 OUT= MAC= SRC=192.0.2.1 DST=192.168.24.72 LEN=1500 TOS=0x00 PREC=0x00 TTL=255 ID=0 PROTO=TCP SPT=34375 DPT=8080 SEQ=1 ACK=4162510439 WINDOW=257 RES=0x00 ACK PSH URGP=0 ++0.0001 < P. 1:1461(1460) ack 1 win 257 + +// only sent if above packet isn't flagged as invalid ++.0 > . 1:1(0) ack 67161 win 65535 + ++0 `$xtables -D INPUT -m conntrack --ctstate INVALID -j DROP` diff --git a/tools/testing/selftests/net/netfilter/packetdrill/conntrack_inexact_rst.pkt b/tools/testing/selftests/net/netfilter/packetdrill/conntrack_inexact_rst.pkt new file mode 100644 index 0000000000..dccdd4c009 --- /dev/null +++ b/tools/testing/selftests/net/netfilter/packetdrill/conntrack_inexact_rst.pkt @@ -0,0 +1,62 @@ +// check RST packet that doesn't exactly match expected next sequence +// number still transitions conntrack state to CLOSE iff its already in +// FIN/CLOSE_WAIT. + +`packetdrill/common.sh` + +// 5.771921 server_ip > client_ip TLSv1.2 337 [Packet size limited during capture] +// 5.771994 server_ip > client_ip TLSv1.2 337 [Packet size limited during capture] +// 5.772212 client_ip > server_ip TCP 66 45020 > 443 [ACK] Seq=1905874048 Ack=781810658 Win=36352 Len=0 TSval=3317842872 TSecr=675936334 +// 5.787924 server_ip > client_ip TLSv1.2 1300 [Packet size limited during capture] +// 5.788126 server_ip > client_ip TLSv1.2 90 Application Data +// 5.788207 server_ip > client_ip TCP 66 443 > 45020 [FIN, ACK] Seq=781811916 Ack=1905874048 Win=31104 Len=0 TSval=675936350 TSecr=3317842872 +// 5.788447 client_ip > server_ip TLSv1.2 90 Application Data +// 5.788479 client_ip > server_ip TCP 66 45020 > 443 [RST, ACK] Seq=1905874072 Ack=781811917 Win=39040 Len=0 TSval=3317842889 TSecr=675936350 +// 5.788581 server_ip > client_ip TCP 54 8443 > 45020 [RST] Seq=781811892 Win=0 Len=0 + ++0 `iptables -A INPUT -p tcp -m conntrack --ctstate INVALID -j DROP` ++0 `iptables -A OUTPUT -p tcp -m conntrack --ctstate INVALID -j DROP` + ++0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 ++0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 + +0.1 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress) + +0.1 > S 0:0(0) win 65535 <mss 1460,sackOK,TS val 1 ecr 0,nop,wscale 8> + ++0.1 < S. 1:1(0) ack 1 win 65535 <mss 1460> + ++0 > . 1:1(0) ack 1 win 65535 ++0 < . 1:1001(1000) ack 1 win 65535 ++0 < . 1001:2001(1000) ack 1 win 65535 ++0 < . 2001:3001(1000) ack 1 win 65535 + ++0 > . 1:1(0) ack 1001 win 65535 ++0 > . 1:1(0) ack 2001 win 65535 ++0 > . 1:1(0) ack 3001 win 65535 + ++0 write(3, ..., 1000) = 1000 + ++0.0 > P. 1:1001(1000) ack 3001 win 65535 + ++0.1 read(3, ..., 1000) = 1000 + +// Conntrack should move to FIN_WAIT, then CLOSE_WAIT. ++0 < F. 3001:3001(0) ack 1001 win 65535 ++0 > . 1001:1001(0) ack 3002 win 65535 + ++0 `conntrack -f $NFCT_IP_VERSION -L -p tcp --dport 8080 2>/dev/null |grep -q CLOSE_WAIT` + ++1 close(3) = 0 +// RST: unread data. FIN was seen, hence ack + 1 ++0 > R. 1001:1001(0) ack 3002 win 65535 +// ... and then, CLOSE. ++0 `conntrack -f $NFCT_IP_VERSION -L -p tcp --dport 8080 2>/dev/null |grep -q CLOSE\ ` + +// Spurious RST from peer -- no sk state. Should NOT get +// marked INVALID, because conntrack is already closing. ++0.1 < R 2001:2001(0) win 0 + +// No packets should have been marked INVALID ++0 `iptables -v -S INPUT | grep INVALID | grep -q -- "-c 0 0"` ++0 `iptables -v -S OUTPUT | grep INVALID | grep -q -- "-c 0 0"` diff --git a/tools/testing/selftests/net/netfilter/packetdrill/conntrack_rst_invalid.pkt b/tools/testing/selftests/net/netfilter/packetdrill/conntrack_rst_invalid.pkt new file mode 100644 index 0000000000..686f18a3d9 --- /dev/null +++ b/tools/testing/selftests/net/netfilter/packetdrill/conntrack_rst_invalid.pkt @@ -0,0 +1,59 @@ +// check that out of window resets are marked as INVALID and conntrack remains +// in ESTABLISHED state. + +`packetdrill/common.sh` + ++0 `$xtables -A INPUT -p tcp -m conntrack --ctstate INVALID -j DROP` ++0 `$xtables -A OUTPUT -p tcp -m conntrack --ctstate INVALID -j DROP` + ++0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 ++0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 + +0.1 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress) + +0.1 > S 0:0(0) win 65535 <mss 1460,sackOK,TS val 1 ecr 0,nop,wscale 8> + ++0.1 < S. 1:1(0) ack 1 win 65535 <mss 1460> + ++0 > . 1:1(0) ack 1 win 65535 ++0 < . 1:1001(1000) ack 1 win 65535 ++0 < . 1001:2001(1000) ack 1 win 65535 ++0 < . 2001:3001(1000) ack 1 win 65535 + ++0 > . 1:1(0) ack 1001 win 65535 ++0 > . 1:1(0) ack 2001 win 65535 ++0 > . 1:1(0) ack 3001 win 65535 + ++0 write(3, ..., 1000) = 1000 + +// out of window ++0.0 < R 0:0(0) win 0 ++0 `conntrack -f $NFCT_IP_VERSION -L -p tcp --dport 8080 2>/dev/null |grep -q ESTABLISHED` + +// out of window ++0.0 < R 1000000:1000000(0) win 0 ++0 `conntrack -f $NFCT_IP_VERSION -L -p tcp --dport 8080 2>/dev/null |grep -q ESTABLISHED` + +// in-window but not exact match ++0.0 < R 42:42(0) win 0 ++0 `conntrack -f $NFCT_IP_VERSION -L -p tcp --dport 8080 2>/dev/null |grep -q ESTABLISHED` + ++0.0 > P. 1:1001(1000) ack 3001 win 65535 + ++0.1 read(3, ..., 1000) = 1000 ++0 `conntrack -f $NFCT_IP_VERSION -L -p tcp --dport 8080 2>/dev/null |grep -q ESTABLISHED` + ++0 < . 3001:3001(0) ack 1001 win 65535 + ++0.0 < R. 3000:3000(0) ack 1001 win 0 ++0 `conntrack -f $NFCT_IP_VERSION -L -p tcp --dport 8080 2>/dev/null |grep -q ESTABLISHED` + +// exact next sequence ++0.0 < R. 3001:3001(0) ack 1001 win 0 +// Conntrack should move to CLOSE + +// Expect four invalid RSTs ++0 `$xtables -v -S INPUT | grep INVALID | grep -q -- "-c 4 "` ++0 `$xtables -v -S OUTPUT | grep INVALID | grep -q -- "-c 0 0"` + ++0 `conntrack -f $NFCT_IP_VERSION -L -p tcp --dport 8080 2>/dev/null |grep -q CLOSE\ ` diff --git a/tools/testing/selftests/net/netfilter/packetdrill/conntrack_syn_challenge_ack.pkt b/tools/testing/selftests/net/netfilter/packetdrill/conntrack_syn_challenge_ack.pkt new file mode 100644 index 0000000000..3442cd29bc --- /dev/null +++ b/tools/testing/selftests/net/netfilter/packetdrill/conntrack_syn_challenge_ack.pkt @@ -0,0 +1,44 @@ +// Check connection re-use, i.e. peer that receives the SYN answers with +// a challenge-ACK. +// Check that conntrack lets all packets pass, including the challenge ack, +// and that a new connection is established. + +`packetdrill/common.sh` + +// S > +// . < (challnge-ack) +// R. > +// S > +// S. < +// Expected outcome: established connection. + ++0 `$xtables -A INPUT -p tcp -m conntrack --ctstate INVALID -j DROP` ++0 `$xtables -A OUTPUT -p tcp -m conntrack --ctstate INVALID -j DROP` + ++0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 ++0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 + +0.1 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress) +0.1 > S 0:0(0) win 65535 <mss 1460,sackOK,TS val 1 ecr 0,nop,wscale 8> + +// Challenge ACK, old incarnation. +0.1 < . 145824453:145824453(0) ack 643160523 win 240 <mss 1460,nop,nop,TS val 1 ecr 1,nop,wscale 0> + ++0.01 > R 643160523:643160523(0) win 0 + ++0.01 `conntrack -f $NFCT_IP_VERSION -L -p tcp --dport 8080 2>/dev/null | grep UNREPLIED | grep -q SYN_SENT` + +// Must go through. ++0.01 > S 0:0(0) win 65535 <mss 1460,sackOK,TS val 1 ecr 0,nop,wscale 8> + +// correct synack ++0.1 < S. 0:0(0) ack 1 win 250 <mss 1460,nop,nop,TS val 1 ecr 1,nop,wscale 0> + +// 3whs completes. ++0.01 > . 1:1(0) ack 1 win 256 <nop,nop,TS val 1 ecr 1> + ++0 `conntrack -f $NFCT_IP_VERSION -L -p tcp --dport 8080 2>/dev/null | grep ESTABLISHED | grep -q ASSURED` + +// No packets should have been marked INVALID ++0 `$xtables -v -S INPUT | grep INVALID | grep -q -- "-c 0 0"` ++0 `$xtables -v -S OUTPUT | grep INVALID | grep -q -- "-c 0 0"` diff --git a/tools/testing/selftests/net/netfilter/packetdrill/conntrack_synack_old.pkt b/tools/testing/selftests/net/netfilter/packetdrill/conntrack_synack_old.pkt new file mode 100644 index 0000000000..3047160c4b --- /dev/null +++ b/tools/testing/selftests/net/netfilter/packetdrill/conntrack_synack_old.pkt @@ -0,0 +1,51 @@ +// Check conntrack copes with syn/ack reply for a previous, old incarnation. + +// tcpdump with buggy sequence +// 10.176.25.8.829 > 10.192.171.30.2049: Flags [S], seq 2375731741, win 29200, options [mss 1460,sackOK,TS val 2083107423 ecr 0,nop,wscale 7], length 0 +// OLD synack, for old/previous S +// 10.192.171.30.2049 > 10.176.25.8.829: Flags [S.], seq 145824453, ack 643160523, win 65535, options [mss 8952,nop,wscale 5,TS val 3215437785 ecr 2082921663,nop,nop], length 0 +// This reset never makes it to the endpoint, elided in the packetdrill script +// 10.192.171.30.2049 > 10.176.25.8.829: Flags [R.], seq 1, ack 1, win 65535, options [mss 8952,nop,wscale 5,TS val 3215443451 ecr 2082921663,nop,nop], length 0 +// Syn retransmit, no change +// 10.176.25.8.829 > 10.192.171.30.2049: Flags [S], seq 2375731741, win 29200, options [mss 1460,sackOK,TS val 2083115583 ecr 0,nop,wscale 7], length 0 +// CORRECT synack, should be accepted, but conntrack classified this as INVALID: +// SEQ is over the upper bound (over the window of the receiver) IN=tun0 OUT= MAC= SRC=192.0.2.1 DST=192.168.37.78 LEN=40 TOS=0x00 PREC=0x00 TTL=255 ID=0 PROTO=TCP SPT=8080 DPT=34500 SEQ=162602411 ACK=2124350315 .. +// 10.192.171.30.2049 > 10.176.25.8.829: Flags [S.], seq 162602410, ack 2375731742, win 65535, options [mss 8952,nop,wscale 5,TS val 3215445754 ecr 2083115583,nop,nop], length 0 + +`packetdrill/common.sh` + ++0 `$xtables -A INPUT -p tcp -m conntrack --ctstate INVALID -j DROP` ++0 `$xtables -A OUTPUT -p tcp -m conntrack --ctstate INVALID -j DROP` + ++0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 ++0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 + +0.1 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress) +0.1 > S 0:0(0) win 65535 <mss 1460,sackOK,TS val 1 ecr 0,nop,wscale 8> + +// bogus/outdated synack, invalid ack value +0.1 < S. 145824453:145824453(0) ack 643160523 win 240 <mss 1440,nop,nop,TS val 1 ecr 1,nop,wscale 0> + +// syn retransmitted +1.01 > S 0:0(0) win 65535 <mss 1460,sackOK,TS val 1015 ecr 0,nop,wscale 8> ++0 `conntrack -f $NFCT_IP_VERSION -L -p tcp --dport 8080 2>/dev/null | grep UNREPLIED | grep -q SYN_SENT` + +// correct synack ++0 < S. 145758918:145758918(0) ack 1 win 250 <mss 1460,nop,nop,TS val 1 ecr 1,nop,wscale 0> ++0 write(3, ..., 1) = 1 + +// with buggy conntrack above packet is dropped, so SYN rtx is seen: +// script packet: 1.054007 . 1:1(0) ack 16777958 win 256 <nop,nop,TS val 1033 ecr 1> +// actual packet: 3.010000 S 0:0(0) win 65535 <mss 1460,sackOK,TS val 1015 ecr 0,nop,wscale 8> ++0 `conntrack -f $NFCT_IP_VERSION -L -p tcp --dport 8080 2>/dev/null | grep ESTABLISHED | grep -q ASSURED` + ++0 > P. 1:2(1) ack 4294901762 win 256 <nop,nop,TS val 1067 ecr 1> + ++0 `conntrack -f $NFCT_IP_VERSION -L -p tcp --dport 8080 2>/dev/null | grep ASSURED | grep -q ESTABLISHED` + +// No packets should have been marked INVALID in OUTPUT direction, 1 in INPUT ++0 `$xtables -v -S OUTPUT | grep INVALID | grep -q -- "-c 0 0"` ++0 `$xtables -v -S INPUT | grep INVALID | grep -q -- "-c 1 "` + ++0 `$xtables -D INPUT -p tcp -m conntrack --ctstate INVALID -j DROP` ++0 `$xtables -D OUTPUT -p tcp -m conntrack --ctstate INVALID -j DROP` diff --git a/tools/testing/selftests/net/netfilter/packetdrill/conntrack_synack_reuse.pkt b/tools/testing/selftests/net/netfilter/packetdrill/conntrack_synack_reuse.pkt new file mode 100644 index 0000000000..842242f8cc --- /dev/null +++ b/tools/testing/selftests/net/netfilter/packetdrill/conntrack_synack_reuse.pkt @@ -0,0 +1,34 @@ +// Check reception of another SYN while we have an established conntrack state. +// Challenge ACK is supposed to pass through, RST reply should clear conntrack +// state and SYN retransmit should give us new 'SYN_RECV' connection state. + +`packetdrill/common.sh` + +// should show a match if bug is present: ++0 `iptables -A INPUT -m conntrack --ctstate INVALID -p tcp --tcp-flags SYN,ACK SYN,ACK` + ++0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 ++0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 ++0 bind(3, ..., ...) = 0 ++0 listen(3, 10) = 0 + ++0 < S 0:0(0) win 32792 <mss 1000,nop,wscale 7, TS val 1 ecr 0,nop,nop> ++0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,TS val 100 ecr 1,nop,wscale 8> ++.01 < . 1:1(0) ack 1 win 257 <TS val 1 ecr 100,nop,nop> ++0 accept(3, ..., ...) = 4 + ++0 < P. 1:101(100) ack 1 win 257 <TS val 2 ecr 100,nop,nop> ++.001 > . 1:1(0) ack 101 win 256 <nop,nop,TS val 110 ecr 2> ++0 read(4, ..., 101) = 100 + +1.0 < S 2000:2000(0) win 32792 <mss 1000,nop,wscale 7, TS val 233 ecr 0,nop,nop> +// Won't expect this: challenge ack. + ++0 > . 1:1(0) ack 101 win 256 <nop,nop,TS val 112 ecr 2> ++0 < R. 101:101(0) ack 1 win 257 ++0 close(4) = 0 + +1.5 < S 2000:2000(0) win 32792 <mss 1000,nop,wscale 0, TS val 233 ecr 0,nop,nop> + ++0 `conntrack -f $NFCT_IP_VERSION -L -p tcp --dport 8080 2>/dev/null | grep -q SYN_RECV` ++0 `iptables -v -S INPUT | grep INVALID | grep -q -- "-c 0 0"` diff --git a/tools/testing/selftests/net/netfilter/rpath.sh b/tools/testing/selftests/net/netfilter/rpath.sh new file mode 100755 index 0000000000..4485fd7675 --- /dev/null +++ b/tools/testing/selftests/net/netfilter/rpath.sh @@ -0,0 +1,175 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# return code to signal skipped test +ksft_skip=4 + +# search for legacy iptables (it uses the xtables extensions +if iptables-legacy --version >/dev/null 2>&1; then + iptables='iptables-legacy' +elif iptables --version >/dev/null 2>&1; then + iptables='iptables' +else + iptables='' +fi + +if ip6tables-legacy --version >/dev/null 2>&1; then + ip6tables='ip6tables-legacy' +elif ip6tables --version >/dev/null 2>&1; then + ip6tables='ip6tables' +else + ip6tables='' +fi + +if nft --version >/dev/null 2>&1; then + nft='nft' +else + nft='' +fi + +if [ -z "$iptables$ip6tables$nft" ]; then + echo "SKIP: Test needs iptables, ip6tables or nft" + exit $ksft_skip +fi + +sfx=$(mktemp -u "XXXXXXXX") +ns1="ns1-$sfx" +ns2="ns2-$sfx" +trap "ip netns del $ns1; ip netns del $ns2" EXIT + +# create two netns, disable rp_filter in ns2 and +# keep IPv6 address when moving into VRF +ip netns add "$ns1" +ip netns add "$ns2" +ip netns exec "$ns2" sysctl -q net.ipv4.conf.all.rp_filter=0 +ip netns exec "$ns2" sysctl -q net.ipv4.conf.default.rp_filter=0 +ip netns exec "$ns2" sysctl -q net.ipv6.conf.all.keep_addr_on_down=1 + +# a standard connection between the netns, should not trigger rp filter +ip -net "$ns1" link add v0 type veth peer name v0 netns "$ns2" +ip -net "$ns1" link set v0 up; ip -net "$ns2" link set v0 up +ip -net "$ns1" a a 192.168.23.2/24 dev v0 +ip -net "$ns2" a a 192.168.23.1/24 dev v0 +ip -net "$ns1" a a fec0:23::2/64 dev v0 nodad +ip -net "$ns2" a a fec0:23::1/64 dev v0 nodad + +# rp filter testing: ns1 sends packets via v0 which ns2 would route back via d0 +ip -net "$ns2" link add d0 type dummy +ip -net "$ns2" link set d0 up +ip -net "$ns1" a a 192.168.42.2/24 dev v0 +ip -net "$ns2" a a 192.168.42.1/24 dev d0 +ip -net "$ns1" a a fec0:42::2/64 dev v0 nodad +ip -net "$ns2" a a fec0:42::1/64 dev d0 nodad + +# firewall matches to test +[ -n "$iptables" ] && { + common='-t raw -A PREROUTING -s 192.168.0.0/16' + if ! ip netns exec "$ns2" "$iptables" $common -m rpfilter;then + echo "Cannot add rpfilter rule" + exit $ksft_skip + fi + ip netns exec "$ns2" "$iptables" $common -m rpfilter --invert +} +[ -n "$ip6tables" ] && { + common='-t raw -A PREROUTING -s fec0::/16' + if ! ip netns exec "$ns2" "$ip6tables" $common -m rpfilter;then + echo "Cannot add rpfilter rule" + exit $ksft_skip + fi + ip netns exec "$ns2" "$ip6tables" $common -m rpfilter --invert +} +[ -n "$nft" ] && ip netns exec "$ns2" $nft -f - <<EOF +table inet t { + chain c { + type filter hook prerouting priority raw; + ip saddr 192.168.0.0/16 fib saddr . iif oif exists counter + ip6 saddr fec0::/16 fib saddr . iif oif exists counter + } +} +EOF + +die() { + echo "FAIL: $*" + #ip netns exec "$ns2" "$iptables" -t raw -vS + #ip netns exec "$ns2" "$ip6tables" -t raw -vS + #ip netns exec "$ns2" nft list ruleset + exit 1 +} + +# check rule counters, return true if rule did not match +ipt_zero_rule() { # (command) + [ -n "$1" ] || return 0 + ip netns exec "$ns2" "$1" -t raw -vS | grep -q -- "-m rpfilter -c 0 0" +} +ipt_zero_reverse_rule() { # (command) + [ -n "$1" ] || return 0 + ip netns exec "$ns2" "$1" -t raw -vS | \ + grep -q -- "-m rpfilter --invert -c 0 0" +} +nft_zero_rule() { # (family) + [ -n "$nft" ] || return 0 + ip netns exec "$ns2" "$nft" list chain inet t c | \ + grep -q "$1 saddr .* counter packets 0 bytes 0" +} + +netns_ping() { # (netns, args...) + local netns="$1" + shift + ip netns exec "$netns" ping -q -c 1 -W 1 "$@" >/dev/null +} + +clear_counters() { + [ -n "$iptables" ] && ip netns exec "$ns2" "$iptables" -t raw -Z + [ -n "$ip6tables" ] && ip netns exec "$ns2" "$ip6tables" -t raw -Z + if [ -n "$nft" ]; then + ( + echo "delete table inet t"; + ip netns exec "$ns2" $nft -s list table inet t; + ) | ip netns exec "$ns2" $nft -f - + fi +} + +testrun() { + clear_counters + + # test 1: martian traffic should fail rpfilter matches + netns_ping "$ns1" -I v0 192.168.42.1 && \ + die "martian ping 192.168.42.1 succeeded" + netns_ping "$ns1" -I v0 fec0:42::1 && \ + die "martian ping fec0:42::1 succeeded" + + ipt_zero_rule "$iptables" || die "iptables matched martian" + ipt_zero_rule "$ip6tables" || die "ip6tables matched martian" + ipt_zero_reverse_rule "$iptables" && die "iptables not matched martian" + ipt_zero_reverse_rule "$ip6tables" && die "ip6tables not matched martian" + nft_zero_rule ip || die "nft IPv4 matched martian" + nft_zero_rule ip6 || die "nft IPv6 matched martian" + + clear_counters + + # test 2: rpfilter match should pass for regular traffic + netns_ping "$ns1" 192.168.23.1 || \ + die "regular ping 192.168.23.1 failed" + netns_ping "$ns1" fec0:23::1 || \ + die "regular ping fec0:23::1 failed" + + ipt_zero_rule "$iptables" && die "iptables match not effective" + ipt_zero_rule "$ip6tables" && die "ip6tables match not effective" + ipt_zero_reverse_rule "$iptables" || die "iptables match over-effective" + ipt_zero_reverse_rule "$ip6tables" || die "ip6tables match over-effective" + nft_zero_rule ip && die "nft IPv4 match not effective" + nft_zero_rule ip6 && die "nft IPv6 match not effective" + +} + +testrun + +# repeat test with vrf device in $ns2 +ip -net "$ns2" link add vrf0 type vrf table 10 +ip -net "$ns2" link set vrf0 up +ip -net "$ns2" link set v0 master vrf0 + +testrun + +echo "PASS: netfilter reverse path match works as intended" +exit 0 diff --git a/tools/testing/selftests/net/netfilter/sctp_collision.c b/tools/testing/selftests/net/netfilter/sctp_collision.c new file mode 100644 index 0000000000..21bb1cfd8a --- /dev/null +++ b/tools/testing/selftests/net/netfilter/sctp_collision.c @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> +#include <arpa/inet.h> + +int main(int argc, char *argv[]) +{ + struct sockaddr_in saddr = {}, daddr = {}; + int sd, ret, len = sizeof(daddr); + struct timeval tv = {25, 0}; + char buf[] = "hello"; + + if (argc != 6 || (strcmp(argv[1], "server") && strcmp(argv[1], "client"))) { + printf("%s <server|client> <LOCAL_IP> <LOCAL_PORT> <REMOTE_IP> <REMOTE_PORT>\n", + argv[0]); + return -1; + } + + sd = socket(AF_INET, SOCK_SEQPACKET, IPPROTO_SCTP); + if (sd < 0) { + printf("Failed to create sd\n"); + return -1; + } + + saddr.sin_family = AF_INET; + saddr.sin_addr.s_addr = inet_addr(argv[2]); + saddr.sin_port = htons(atoi(argv[3])); + + ret = bind(sd, (struct sockaddr *)&saddr, sizeof(saddr)); + if (ret < 0) { + printf("Failed to bind to address\n"); + goto out; + } + + ret = listen(sd, 5); + if (ret < 0) { + printf("Failed to listen on port\n"); + goto out; + } + + daddr.sin_family = AF_INET; + daddr.sin_addr.s_addr = inet_addr(argv[4]); + daddr.sin_port = htons(atoi(argv[5])); + + /* make test shorter than 25s */ + ret = setsockopt(sd, SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof(tv)); + if (ret < 0) { + printf("Failed to setsockopt SO_RCVTIMEO\n"); + goto out; + } + + if (!strcmp(argv[1], "server")) { + sleep(1); /* wait a bit for client's INIT */ + ret = connect(sd, (struct sockaddr *)&daddr, len); + if (ret < 0) { + printf("Failed to connect to peer\n"); + goto out; + } + ret = recvfrom(sd, buf, sizeof(buf), 0, (struct sockaddr *)&daddr, &len); + if (ret < 0) { + printf("Failed to recv msg %d\n", ret); + goto out; + } + ret = sendto(sd, buf, strlen(buf) + 1, 0, (struct sockaddr *)&daddr, len); + if (ret < 0) { + printf("Failed to send msg %d\n", ret); + goto out; + } + printf("Server: sent! %d\n", ret); + } + + if (!strcmp(argv[1], "client")) { + usleep(300000); /* wait a bit for server's listening */ + ret = connect(sd, (struct sockaddr *)&daddr, len); + if (ret < 0) { + printf("Failed to connect to peer\n"); + goto out; + } + sleep(1); /* wait a bit for server's delayed INIT_ACK to reproduce the issue */ + ret = sendto(sd, buf, strlen(buf) + 1, 0, (struct sockaddr *)&daddr, len); + if (ret < 0) { + printf("Failed to send msg %d\n", ret); + goto out; + } + ret = recvfrom(sd, buf, sizeof(buf), 0, (struct sockaddr *)&daddr, &len); + if (ret < 0) { + printf("Failed to recv msg %d\n", ret); + goto out; + } + printf("Client: rcvd! %d\n", ret); + } + ret = 0; +out: + close(sd); + return ret; +} diff --git a/tools/testing/selftests/net/netfilter/settings b/tools/testing/selftests/net/netfilter/settings new file mode 100644 index 0000000000..abc5648b59 --- /dev/null +++ b/tools/testing/selftests/net/netfilter/settings @@ -0,0 +1 @@ +timeout=1800 diff --git a/tools/testing/selftests/net/netfilter/xt_string.sh b/tools/testing/selftests/net/netfilter/xt_string.sh new file mode 100755 index 0000000000..8d401c69e3 --- /dev/null +++ b/tools/testing/selftests/net/netfilter/xt_string.sh @@ -0,0 +1,133 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# return code to signal skipped test +ksft_skip=4 +rc=0 + +source lib.sh + +checktool "socat -h" "run test without socat" +checktool "iptables --version" "test needs iptables" + +infile=$(mktemp) + +cleanup() +{ + ip netns del "$netns" + rm -f "$infile" +} + +trap cleanup EXIT + +setup_ns netns + +ip -net "$netns" link add d0 type dummy +ip -net "$netns" link set d0 up +ip -net "$netns" addr add 10.1.2.1/24 dev d0 + +pattern="foo bar baz" +patlen=11 +hdrlen=$((20 + 8)) # IPv4 + UDP + +#ip netns exec "$netns" tcpdump -npXi d0 & +#tcpdump_pid=$! +#trap 'kill $tcpdump_pid; ip netns del $netns' EXIT + +add_rule() { # (alg, from, to) + ip netns exec "$netns" \ + iptables -A OUTPUT -o d0 -m string \ + --string "$pattern" --algo "$1" --from "$2" --to "$3" +} +showrules() { # () + ip netns exec "$netns" iptables -v -S OUTPUT | grep '^-A' +} +zerorules() { + ip netns exec "$netns" iptables -Z OUTPUT +} +countrule() { # (pattern) + showrules | grep -c -- "$*" +} +send() { # (offset) + ( for ((i = 0; i < $1 - hdrlen; i++)); do + echo -n " " + done + echo -n "$pattern" + ) > "$infile" + + ip netns exec "$netns" socat -t 1 -u STDIN UDP-SENDTO:10.1.2.2:27374 < "$infile" +} + +add_rule bm 1000 1500 +add_rule bm 1400 1600 +add_rule kmp 1000 1500 +add_rule kmp 1400 1600 + +zerorules +send 0 +send $((1000 - patlen)) +if [ "$(countrule -c 0 0)" -ne 4 ]; then + echo "FAIL: rules match data before --from" + showrules + ((rc--)) +fi + +zerorules +send 1000 +send $((1400 - patlen)) +if [ "$(countrule -c 2)" -ne 2 ]; then + echo "FAIL: only two rules should match at low offset" + showrules + ((rc--)) +fi + +zerorules +send $((1500 - patlen)) +if [ "$(countrule -c 1)" -ne 4 ]; then + echo "FAIL: all rules should match at end of packet" + showrules + ((rc--)) +fi + +zerorules +send 1495 +if [ "$(countrule -c 1)" -ne 1 ]; then + echo "FAIL: only kmp with proper --to should match pattern spanning fragments" + showrules + ((rc--)) +fi + +zerorules +send 1500 +if [ "$(countrule -c 1)" -ne 2 ]; then + echo "FAIL: two rules should match pattern at start of second fragment" + showrules + ((rc--)) +fi + +zerorules +send $((1600 - patlen)) +if [ "$(countrule -c 1)" -ne 2 ]; then + echo "FAIL: two rules should match pattern at end of largest --to" + showrules + ((rc--)) +fi + +zerorules +send $((1600 - patlen + 1)) +if [ "$(countrule -c 1)" -ne 0 ]; then + echo "FAIL: no rules should match pattern extending largest --to" + showrules + ((rc--)) +fi + +zerorules +send 1600 +if [ "$(countrule -c 1)" -ne 0 ]; then + echo "FAIL: no rule should match pattern past largest --to" + showrules + ((rc--)) +fi + +[ $rc -eq 0 ] && echo "PASS: string match tests" +exit $rc diff --git a/tools/testing/selftests/net/nl_netdev.py b/tools/testing/selftests/net/nl_netdev.py new file mode 100755 index 0000000000..93d9d91452 --- /dev/null +++ b/tools/testing/selftests/net/nl_netdev.py @@ -0,0 +1,98 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +import time +from lib.py import ksft_run, ksft_exit, ksft_pr +from lib.py import ksft_eq, ksft_ge, ksft_busy_wait +from lib.py import NetdevFamily, NetdevSimDev, ip + + +def empty_check(nf) -> None: + devs = nf.dev_get({}, dump=True) + ksft_ge(len(devs), 1) + + +def lo_check(nf) -> None: + lo_info = nf.dev_get({"ifindex": 1}) + ksft_eq(len(lo_info['xdp-features']), 0) + ksft_eq(len(lo_info['xdp-rx-metadata-features']), 0) + + +def page_pool_check(nf) -> None: + with NetdevSimDev() as nsimdev: + nsim = nsimdev.nsims[0] + + def up(): + ip(f"link set dev {nsim.ifname} up") + + def down(): + ip(f"link set dev {nsim.ifname} down") + + def get_pp(): + pp_list = nf.page_pool_get({}, dump=True) + return [pp for pp in pp_list if pp.get("ifindex") == nsim.ifindex] + + # No page pools when down + down() + ksft_eq(len(get_pp()), 0) + + # Up, empty page pool appears + up() + pp_list = get_pp() + ksft_ge(len(pp_list), 0) + refs = sum([pp["inflight"] for pp in pp_list]) + ksft_eq(refs, 0) + + # Down, it disappears, again + down() + pp_list = get_pp() + ksft_eq(len(pp_list), 0) + + # Up, allocate a page + up() + nsim.dfs_write("pp_hold", "y") + pp_list = nf.page_pool_get({}, dump=True) + refs = sum([pp["inflight"] for pp in pp_list if pp.get("ifindex") == nsim.ifindex]) + ksft_ge(refs, 1) + + # Now let's leak a page + down() + pp_list = get_pp() + ksft_eq(len(pp_list), 1) + refs = sum([pp["inflight"] for pp in pp_list]) + ksft_eq(refs, 1) + attached = [pp for pp in pp_list if "detach-time" not in pp] + ksft_eq(len(attached), 0) + + # New pp can get created, and we'll have two + up() + pp_list = get_pp() + attached = [pp for pp in pp_list if "detach-time" not in pp] + detached = [pp for pp in pp_list if "detach-time" in pp] + ksft_eq(len(attached), 1) + ksft_eq(len(detached), 1) + + # Free the old page and the old pp is gone + nsim.dfs_write("pp_hold", "n") + # Freeing check is once a second so we may need to retry + ksft_busy_wait(lambda: len(get_pp()) == 1, deadline=2) + + # And down... + down() + ksft_eq(len(get_pp()), 0) + + # Last, leave the page hanging for destroy, nothing to check + # we're trying to exercise the orphaning path in the kernel + up() + nsim.dfs_write("pp_hold", "y") + + +def main() -> None: + nf = NetdevFamily() + ksft_run([empty_check, lo_check, page_pool_check], + args=(nf, )) + ksft_exit() + + +if __name__ == "__main__": + main() diff --git a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py index 5e0e539a32..9f8dec2f65 100644 --- a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py +++ b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py @@ -489,7 +489,7 @@ class ovsactions(nla): actstr, reason = parse_extract_field( actstr, "drop(", - "([0-9]+)", + r"([0-9]+)", lambda x: int(x, 0), False, None, @@ -502,9 +502,9 @@ class ovsactions(nla): actstr = actstr[len("drop"): ] return (totallen - len(actstr)) - elif parse_starts_block(actstr, "^(\d+)", False, True): + elif parse_starts_block(actstr, r"^(\d+)", False, True): actstr, output = parse_extract_field( - actstr, None, "(\d+)", lambda x: int(x), False, "0" + actstr, None, r"(\d+)", lambda x: int(x), False, "0" ) self["attrs"].append(["OVS_ACTION_ATTR_OUTPUT", output]) parsed = True @@ -512,7 +512,7 @@ class ovsactions(nla): actstr, recircid = parse_extract_field( actstr, "recirc(", - "([0-9a-fA-Fx]+)", + r"([0-9a-fA-Fx]+)", lambda x: int(x, 0), False, 0, @@ -531,7 +531,7 @@ class ovsactions(nla): for flat_act in parse_flat_map: if parse_starts_block(actstr, flat_act[0], False): actstr = actstr[len(flat_act[0]):] - self["attrs"].append([flat_act[1]]) + self["attrs"].append([flat_act[1], True]) actstr = actstr[strspn(actstr, ", ") :] parsed = True @@ -588,17 +588,17 @@ class ovsactions(nla): actstr = actstr[3:] actstr, ip_block_min = parse_extract_field( - actstr, "=", "([0-9a-fA-F\.]+)", str, False + actstr, "=", r"([0-9a-fA-F\.]+)", str, False ) actstr, ip_block_max = parse_extract_field( - actstr, "-", "([0-9a-fA-F\.]+)", str, False + actstr, "-", r"([0-9a-fA-F\.]+)", str, False ) actstr, proto_min = parse_extract_field( - actstr, ":", "(\d+)", int, False + actstr, ":", r"(\d+)", int, False ) actstr, proto_max = parse_extract_field( - actstr, "-", "(\d+)", int, False + actstr, "-", r"(\d+)", int, False ) if t is not None: diff --git a/tools/testing/selftests/net/sample_map_ret0.bpf.c b/tools/testing/selftests/net/sample_map_ret0.bpf.c new file mode 100644 index 0000000000..43ca925949 --- /dev/null +++ b/tools/testing/selftests/net/sample_map_ret0.bpf.c @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) */ +#include <linux/bpf.h> +#include <bpf/bpf_helpers.h> + +struct { + __uint(type, BPF_MAP_TYPE_HASH); + __type(key, __u32); + __type(value, long); + __uint(max_entries, 2); +} htab SEC(".maps"); + +struct { + __uint(type, BPF_MAP_TYPE_ARRAY); + __type(key, __u32); + __type(value, long); + __uint(max_entries, 2); +} array SEC(".maps"); + +/* Sample program which should always load for testing control paths. */ +SEC("xdp") int func() +{ + __u64 key64 = 0; + __u32 key = 0; + long *value; + + value = bpf_map_lookup_elem(&htab, &key); + if (!value) + return 1; + value = bpf_map_lookup_elem(&array, &key64); + if (!value) + return 1; + + return 0; +} diff --git a/tools/testing/selftests/net/sample_ret0.bpf.c b/tools/testing/selftests/net/sample_ret0.bpf.c new file mode 100644 index 0000000000..1df5ca98bb --- /dev/null +++ b/tools/testing/selftests/net/sample_ret0.bpf.c @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) */ + +#define SEC(name) __attribute__((section(name), used)) + +/* Sample program which should always load for testing control paths. */ +SEC("xdp") +int func() +{ + return 0; +} diff --git a/tools/testing/selftests/net/srv6_end_dx4_netfilter_test.sh b/tools/testing/selftests/net/srv6_end_dx4_netfilter_test.sh new file mode 100755 index 0000000000..e23210aa54 --- /dev/null +++ b/tools/testing/selftests/net/srv6_end_dx4_netfilter_test.sh @@ -0,0 +1,335 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# author: Jianguo Wu <wujianguo@chinatelecom.cn> +# +# Mostly copied from tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh. +# +# This script is designed for testing the support of netfilter hooks for +# SRv6 End.DX4 behavior. +# +# Hereafter a network diagram is shown, where one tenants (named 100) offer +# IPv4 L3 VPN services allowing hosts to communicate with each other across +# an IPv6 network. +# +# Routers rt-1 and rt-2 implement IPv4 L3 VPN services leveraging the SRv6 +# architecture. The key components for such VPNs are: a) SRv6 Encap behavior, +# b) SRv6 End.DX4 behavior. +# +# To explain how an IPv4 L3 VPN based on SRv6 works, let us briefly consider an +# example where, within the same domain of tenant 100, the host hs-1 pings +# the host hs-2. +# +# First of all, L2 reachability of the host hs-2 is taken into account by +# the router rt-1 which acts as an arp proxy. +# +# When the host hs-1 sends an IPv4 packet destined to hs-2, the router rt-1 +# receives the packet on the internal veth-t100 interface, rt-1 contains the +# SRv6 Encap route for encapsulating the IPv4 packet in a IPv6 plus the Segment +# Routing Header (SRH) packet. This packet is sent through the (IPv6) core +# network up to the router rt-2 that receives it on veth0 interface. +# +# The rt-2 router uses the 'localsid' routing table to process incoming +# IPv6+SRH packets which belong to the VPN of the tenant 100. For each of these +# packets, the SRv6 End.DX4 behavior removes the outer IPv6+SRH headers and +# routs the packet to the specified nexthop. Afterwards, the packet is sent to +# the host hs-2 through the veth-t100 interface. +# +# The ping response follows the same processing but this time the role of rt-1 +# and rt-2 are swapped. +# +# And when net.netfilter.nf_hooks_lwtunnel is set to 1 in rt-1 or rt-2, and a +# rpfilter iptables rule is added, SRv6 packets will go through netfilter PREROUTING +# hooks. +# +# +# +-------------------+ +-------------------+ +# | | | | +# | hs-1 netns | | hs-2 netns | +# | | | | +# | +-------------+ | | +-------------+ | +# | | veth0 | | | | veth0 | | +# | | 10.0.0.1/24 | | | | 10.0.0.2/24 | | +# | +-------------+ | | +-------------+ | +# | . | | . | +# +-------------------+ +-------------------+ +# . . +# . . +# . . +# +-----------------------------------+ +-----------------------------------+ +# | . | | . | +# | +---------------+ | | +---------------- | +# | | veth-t100 | | | | veth-t100 | | +# | | 10.0.0.11/24 | +----------+ | | +----------+ | 10.0.0.22/24 | | +# | +-------+-------+ | route | | | | route | +-------+-------- | +# | | table | | | | table | | +# | +----------+ | | +----------+ | +# | +--------------+ | | +--------------+ | +# | | veth0 | | | | veth0 | | +# | | 2001:11::1/64 |.|...|.| 2001:11::2/64 | | +# | +--------------+ | | +--------------+ | +# | | | | +# | rt-1 netns | | rt-2 netns | +# | | | | +# +-----------------------------------+ +-----------------------------------+ +# +# ~~~~~~~~~~~~~~~~~~~~~~~~~ +# | Network configuration | +# ~~~~~~~~~~~~~~~~~~~~~~~~~ +# +# rt-1: localsid table +# +----------------------------------------------------------------+ +# |SID |Action | +# +----------------------------------------------------------------+ +# |fc00:21:100::6004|apply SRv6 End.DX4 nh4 10.0.0.1 dev veth-t100 | +# +----------------------------------------------------------------+ +# +# rt-1: route table +# +---------------------------------------------------+ +# |host |Action | +# +---------------------------------------------------+ +# |10.0.0.2 |apply seg6 encap segs fc00:12:100::6004| +# +---------------------------------------------------+ +# |10.0.0.0/24|forward to dev veth_t100 | +# +---------------------------------------------------+ +# +# +# rt-2: localsid table +# +---------------------------------------------------------------+ +# |SID |Action | +# +---------------------------------------------------------------+ +# |fc00:12:100::6004|apply SRv6 End.DX4 nh4 10.0.0.2 dev veth-t100| +# +---------------------------------------------------------------+ +# +# rt-2: route table +# +---------------------------------------------------+ +# |host |Action | +# +---------------------------------------------------+ +# |10.0.0.1 |apply seg6 encap segs fc00:21:100::6004| +# +---------------------------------------------------+ +# |10.0.0.0/24|forward to dev veth_t100 | +# +---------------------------------------------------+ +# + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +readonly IPv6_RT_NETWORK=2001:11 +readonly IPv4_HS_NETWORK=10.0.0 +readonly SID_LOCATOR=fc00 + +PING_TIMEOUT_SEC=4 + +ret=0 + +PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no} + +log_test() +{ + local rc=$1 + local expected=$2 + local msg="$3" + + if [ ${rc} -eq ${expected} ]; then + nsuccess=$((nsuccess+1)) + printf "\n TEST: %-60s [ OK ]\n" "${msg}" + else + ret=1 + nfail=$((nfail+1)) + printf "\n TEST: %-60s [FAIL]\n" "${msg}" + if [ "${PAUSE_ON_FAIL}" = "yes" ]; then + echo + echo "hit enter to continue, 'q' to quit" + read a + [ "$a" = "q" ] && exit 1 + fi + fi +} + +print_log_test_results() +{ + if [ "$TESTS" != "none" ]; then + printf "\nTests passed: %3d\n" ${nsuccess} + printf "Tests failed: %3d\n" ${nfail} + fi +} + +log_section() +{ + echo + echo "################################################################################" + echo "TEST SECTION: $*" + echo "################################################################################" +} + +cleanup() +{ + ip link del veth-rt-1 2>/dev/null || true + ip link del veth-rt-2 2>/dev/null || true + + # destroy routers rt-* and hosts hs-* + for ns in $(ip netns show | grep -E 'rt-*|hs-*'); do + ip netns del ${ns} || true + done +} + +# Setup the basic networking for the routers +setup_rt_networking() +{ + local rt=$1 + local nsname=rt-${rt} + + ip netns add ${nsname} + + ip netns exec ${nsname} sysctl -wq net.ipv6.conf.all.accept_dad=0 + ip netns exec ${nsname} sysctl -wq net.ipv6.conf.default.accept_dad=0 + + ip link set veth-rt-${rt} netns ${nsname} + ip -netns ${nsname} link set veth-rt-${rt} name veth0 + + ip -netns ${nsname} addr add ${IPv6_RT_NETWORK}::${rt}/64 dev veth0 nodad + ip -netns ${nsname} link set veth0 up + ip -netns ${nsname} link set lo up + + ip netns exec ${nsname} sysctl -wq net.ipv4.ip_forward=1 + ip netns exec ${nsname} sysctl -wq net.ipv6.conf.all.forwarding=1 +} + +setup_rt_netfilter() +{ + local rt=$1 + local nsname=rt-${rt} + + ip netns exec ${nsname} sysctl -wq net.netfilter.nf_hooks_lwtunnel=1 + ip netns exec ${nsname} iptables -t raw -A PREROUTING -m rpfilter --invert -j DROP +} + +setup_hs() +{ + local hs=$1 + local rt=$2 + local tid=$3 + local hsname=hs-${hs} + local rtname=rt-${rt} + local rtveth=veth-t${tid} + + # set the networking for the host + ip netns add ${hsname} + + ip -netns ${hsname} link add veth0 type veth peer name ${rtveth} + ip -netns ${hsname} link set ${rtveth} netns ${rtname} + ip -netns ${hsname} addr add ${IPv4_HS_NETWORK}.${hs}/24 dev veth0 + ip -netns ${hsname} link set veth0 up + ip -netns ${hsname} link set lo up + + ip -netns ${rtname} addr add ${IPv4_HS_NETWORK}.${rt}${hs}/24 dev ${rtveth} + ip -netns ${rtname} link set ${rtveth} up + + ip netns exec ${rtname} sysctl -wq net.ipv4.conf.${rtveth}.proxy_arp=1 +} + +setup_vpn_config() +{ + local hssrc=$1 + local rtsrc=$2 + local hsdst=$3 + local rtdst=$4 + local tid=$5 + + local hssrc_name=hs-t${tid}-${hssrc} + local hsdst_name=hs-t${tid}-${hsdst} + local rtsrc_name=rt-${rtsrc} + local rtdst_name=rt-${rtdst} + local vpn_sid=${SID_LOCATOR}:${hssrc}${hsdst}:${tid}::6004 + + # set the encap route for encapsulating packets which arrive from the + # host hssrc and destined to the access router rtsrc. + ip -netns ${rtsrc_name} -4 route add ${IPv4_HS_NETWORK}.${hsdst}/32 \ + encap seg6 mode encap segs ${vpn_sid} dev veth0 + ip -netns ${rtsrc_name} -6 route add ${vpn_sid}/128 \ + via 2001:11::${rtdst} dev veth0 + + # set the decap route for decapsulating packets which arrive from + # the rtdst router and destined to the hsdst host. + ip -netns ${rtdst_name} -6 route add ${vpn_sid}/128 \ + encap seg6local action End.DX4 nh4 ${IPv4_HS_NETWORK}.${hsdst} dev veth-t${tid} +} + +setup() +{ + ip link add veth-rt-1 type veth peer name veth-rt-2 + # setup the networking for router rt-1 and router rt-2 + setup_rt_networking 1 + setup_rt_networking 2 + + # setup two hosts for the tenant 100. + # - host hs-1 is directly connected to the router rt-1; + # - host hs-2 is directly connected to the router rt-2. + setup_hs 1 1 100 + setup_hs 2 2 100 + + # setup the IPv4 L3 VPN which connects the host hs-1 and host hs-2. + setup_vpn_config 1 1 2 2 100 #args: src_host src_router dst_host dst_router tenant + setup_vpn_config 2 2 1 1 100 +} + +check_hs_connectivity() +{ + local hssrc=$1 + local hsdst=$2 + local tid=$3 + + ip netns exec hs-${hssrc} ping -c 1 -W ${PING_TIMEOUT_SEC} \ + ${IPv4_HS_NETWORK}.${hsdst} >/dev/null 2>&1 +} + +check_and_log_hs_connectivity() +{ + local hssrc=$1 + local hsdst=$2 + local tid=$3 + + check_hs_connectivity ${hssrc} ${hsdst} ${tid} + log_test $? 0 "Hosts connectivity: hs-${hssrc} -> hs-${hsdst} (tenant ${tid})" +} + +host_tests() +{ + log_section "SRv6 VPN connectivity test among hosts in the same tenant" + + check_and_log_hs_connectivity 1 2 100 + check_and_log_hs_connectivity 2 1 100 +} + +router_netfilter_tests() +{ + log_section "SRv6 VPN connectivity test with netfilter enabled in routers" + setup_rt_netfilter 1 + setup_rt_netfilter 2 + + check_and_log_hs_connectivity 1 2 100 + check_and_log_hs_connectivity 2 1 100 +} + +if [ "$(id -u)" -ne 0 ];then + echo "SKIP: Need root privileges" + exit $ksft_skip +fi + +if [ ! -x "$(command -v ip)" ]; then + echo "SKIP: Could not run test without ip tool" + exit $ksft_skip +fi + +cleanup &>/dev/null + +setup + +host_tests +router_netfilter_tests + +print_log_test_results + +cleanup &>/dev/null + +exit ${ret} diff --git a/tools/testing/selftests/net/srv6_end_dx6_netfilter_test.sh b/tools/testing/selftests/net/srv6_end_dx6_netfilter_test.sh new file mode 100755 index 0000000000..9e69a2ed5b --- /dev/null +++ b/tools/testing/selftests/net/srv6_end_dx6_netfilter_test.sh @@ -0,0 +1,340 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# author: Jianguo Wu <wujianguo@chinatelecom.cn> +# +# Mostly copied from tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh. +# +# This script is designed for testing the support of netfilter hooks for +# SRv6 End.DX4 behavior. +# +# Hereafter a network diagram is shown, where one tenants (named 100) offer +# IPv6 L3 VPN services allowing hosts to communicate with each other across +# an IPv6 network. +# +# Routers rt-1 and rt-2 implement IPv6 L3 VPN services leveraging the SRv6 +# architecture. The key components for such VPNs are: a) SRv6 Encap behavior, +# b) SRv6 End.DX4 behavior. +# +# To explain how an IPv6 L3 VPN based on SRv6 works, let us briefly consider an +# example where, within the same domain of tenant 100, the host hs-1 pings +# the host hs-2. +# +# First of all, L2 reachability of the host hs-2 is taken into account by +# the router rt-1 which acts as an arp proxy. +# +# When the host hs-1 sends an IPv6 packet destined to hs-2, the router rt-1 +# receives the packet on the internal veth-t100 interface, rt-1 contains the +# SRv6 Encap route for encapsulating the IPv6 packet in a IPv6 plus the Segment +# Routing Header (SRH) packet. This packet is sent through the (IPv6) core +# network up to the router rt-2 that receives it on veth0 interface. +# +# The rt-2 router uses the 'localsid' routing table to process incoming +# IPv6+SRH packets which belong to the VPN of the tenant 100. For each of these +# packets, the SRv6 End.DX4 behavior removes the outer IPv6+SRH headers and +# routs the packet to the specified nexthop. Afterwards, the packet is sent to +# the host hs-2 through the veth-t100 interface. +# +# The ping response follows the same processing but this time the role of rt-1 +# and rt-2 are swapped. +# +# And when net.netfilter.nf_hooks_lwtunnel is set to 1 in rt-1 or rt-2, and a +# rpfilter iptables rule is added, SRv6 packets will go through netfilter PREROUTING +# hooks. +# +# +# +-------------------+ +-------------------+ +# | | | | +# | hs-1 netns | | hs-2 netns | +# | | | | +# | +-------------+ | | +-------------+ | +# | | veth0 | | | | veth0 | | +# | | cafe::1/64 | | | | cafe::2/64 | | +# | +-------------+ | | +-------------+ | +# | . | | . | +# +-------------------+ +-------------------+ +# . . +# . . +# . . +# +-----------------------------------+ +-----------------------------------+ +# | . | | . | +# | +---------------+ | | +---------------- | +# | | veth-t100 | | | | veth-t100 | | +# | | cafe::11/64 | +----------+ | | +----------+ | cafe::22/64 | | +# | +-------+-------+ | route | | | | route | +-------+-------- | +# | | table | | | | table | | +# | +----------+ | | +----------+ | +# | +--------------+ | | +--------------+ | +# | | veth0 | | | | veth0 | | +# | | 2001:11::1/64 |.|...|.| 2001:11::2/64 | | +# | +--------------+ | | +--------------+ | +# | | | | +# | rt-1 netns | | rt-2 netns | +# | | | | +# +-----------------------------------+ +-----------------------------------+ +# +# ~~~~~~~~~~~~~~~~~~~~~~~~~ +# | Network configuration | +# ~~~~~~~~~~~~~~~~~~~~~~~~~ +# +# rt-1: localsid table +# +----------------------------------------------------------------+ +# |SID |Action | +# +----------------------------------------------------------------+ +# |fc00:21:100::6004|apply SRv6 End.DX6 nh6 cafe::1 dev veth-t100 | +# +----------------------------------------------------------------+ +# +# rt-1: route table +# +---------------------------------------------------+ +# |host |Action | +# +---------------------------------------------------+ +# |cafe::2 |apply seg6 encap segs fc00:12:100::6004| +# +---------------------------------------------------+ +# |cafe::/64 |forward to dev veth_t100 | +# +---------------------------------------------------+ +# +# +# rt-2: localsid table +# +---------------------------------------------------------------+ +# |SID |Action | +# +---------------------------------------------------------------+ +# |fc00:12:100::6004|apply SRv6 End.DX6 nh6 cafe::2 dev veth-t100 | +# +---------------------------------------------------------------+ +# +# rt-2: route table +# +---------------------------------------------------+ +# |host |Action | +# +---------------------------------------------------+ +# |cafe::1 |apply seg6 encap segs fc00:21:100::6004| +# +---------------------------------------------------+ +# |cafe::/64 |forward to dev veth_t100 | +# +---------------------------------------------------+ +# + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +readonly IPv6_RT_NETWORK=2001:11 +readonly IPv6_HS_NETWORK=cafe +readonly SID_LOCATOR=fc00 + +PING_TIMEOUT_SEC=4 + +ret=0 + +PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no} + +log_test() +{ + local rc=$1 + local expected=$2 + local msg="$3" + + if [ ${rc} -eq ${expected} ]; then + nsuccess=$((nsuccess+1)) + printf "\n TEST: %-60s [ OK ]\n" "${msg}" + else + ret=1 + nfail=$((nfail+1)) + printf "\n TEST: %-60s [FAIL]\n" "${msg}" + if [ "${PAUSE_ON_FAIL}" = "yes" ]; then + echo + echo "hit enter to continue, 'q' to quit" + read a + [ "$a" = "q" ] && exit 1 + fi + fi +} + +print_log_test_results() +{ + if [ "$TESTS" != "none" ]; then + printf "\nTests passed: %3d\n" ${nsuccess} + printf "Tests failed: %3d\n" ${nfail} + fi +} + +log_section() +{ + echo + echo "################################################################################" + echo "TEST SECTION: $*" + echo "################################################################################" +} + +cleanup() +{ + ip link del veth-rt-1 2>/dev/null || true + ip link del veth-rt-2 2>/dev/null || true + + # destroy routers rt-* and hosts hs-* + for ns in $(ip netns show | grep -E 'rt-*|hs-*'); do + ip netns del ${ns} || true + done +} + +# Setup the basic networking for the routers +setup_rt_networking() +{ + local rt=$1 + local nsname=rt-${rt} + + ip netns add ${nsname} + + ip netns exec ${nsname} sysctl -wq net.ipv6.conf.all.accept_dad=0 + ip netns exec ${nsname} sysctl -wq net.ipv6.conf.default.accept_dad=0 + + ip link set veth-rt-${rt} netns ${nsname} + ip -netns ${nsname} link set veth-rt-${rt} name veth0 + + ip -netns ${nsname} addr add ${IPv6_RT_NETWORK}::${rt}/64 dev veth0 nodad + ip -netns ${nsname} link set veth0 up + ip -netns ${nsname} link set lo up + + ip netns exec ${nsname} sysctl -wq net.ipv6.conf.all.forwarding=1 +} + +setup_rt_netfilter() +{ + local rt=$1 + local nsname=rt-${rt} + + ip netns exec ${nsname} sysctl -wq net.netfilter.nf_hooks_lwtunnel=1 + ip netns exec ${nsname} ip6tables -t raw -A PREROUTING -m rpfilter --invert -j DROP +} + +setup_hs() +{ + local hs=$1 + local rt=$2 + local tid=$3 + local hsname=hs-${hs} + local rtname=rt-${rt} + local rtveth=veth-t${tid} + + # set the networking for the host + ip netns add ${hsname} + + ip -netns ${hsname} link add veth0 type veth peer name ${rtveth} + ip -netns ${hsname} link set ${rtveth} netns ${rtname} + ip -netns ${hsname} addr add ${IPv6_HS_NETWORK}::${hs}/64 dev veth0 nodad + ip -netns ${hsname} link set veth0 up + ip -netns ${hsname} link set lo up + + ip -netns ${rtname} addr add ${IPv6_HS_NETWORK}::${rt}${hs}/64 dev ${rtveth} + ip -netns ${rtname} link set ${rtveth} up + + ip netns exec ${rtname} sysctl -wq net.ipv6.conf.all.accept_dad=0 + ip netns exec ${rtname} sysctl -wq net.ipv6.conf.default.accept_dad=0 + + ip netns exec ${rtname} sysctl -wq net.ipv6.conf.${rtveth}.proxy_ndp=1 +} + +setup_vpn_config() +{ + local hssrc=$1 + local rtsrc=$2 + local hsdst=$3 + local rtdst=$4 + local tid=$5 + + local hssrc_name=hs-t${tid}-${hssrc} + local hsdst_name=hs-t${tid}-${hsdst} + local rtsrc_name=rt-${rtsrc} + local rtdst_name=rt-${rtdst} + local rtveth=veth-t${tid} + local vpn_sid=${SID_LOCATOR}:${hssrc}${hsdst}:${tid}::6004 + + ip -netns ${rtsrc_name} -6 neigh add proxy ${IPv6_HS_NETWORK}::${hsdst} dev ${rtveth} + + # set the encap route for encapsulating packets which arrive from the + # host hssrc and destined to the access router rtsrc. + ip -netns ${rtsrc_name} -6 route add ${IPv6_HS_NETWORK}::${hsdst}/128 \ + encap seg6 mode encap segs ${vpn_sid} dev veth0 + ip -netns ${rtsrc_name} -6 route add ${vpn_sid}/128 \ + via 2001:11::${rtdst} dev veth0 + + # set the decap route for decapsulating packets which arrive from + # the rtdst router and destined to the hsdst host. + ip -netns ${rtdst_name} -6 route add ${vpn_sid}/128 \ + encap seg6local action End.DX6 nh6 ${IPv6_HS_NETWORK}::${hsdst} dev veth-t${tid} +} + +setup() +{ + ip link add veth-rt-1 type veth peer name veth-rt-2 + # setup the networking for router rt-1 and router rt-2 + setup_rt_networking 1 + setup_rt_networking 2 + + # setup two hosts for the tenant 100. + # - host hs-1 is directly connected to the router rt-1; + # - host hs-2 is directly connected to the router rt-2. + setup_hs 1 1 100 + setup_hs 2 2 100 + + # setup the IPv4 L3 VPN which connects the host hs-1 and host hs-2. + setup_vpn_config 1 1 2 2 100 #args: src_host src_router dst_host dst_router tenant + setup_vpn_config 2 2 1 1 100 +} + +check_hs_connectivity() +{ + local hssrc=$1 + local hsdst=$2 + local tid=$3 + + ip netns exec hs-${hssrc} ping -6 -c 1 -W ${PING_TIMEOUT_SEC} \ + ${IPv6_HS_NETWORK}::${hsdst} >/dev/null 2>&1 +} + +check_and_log_hs_connectivity() +{ + local hssrc=$1 + local hsdst=$2 + local tid=$3 + + check_hs_connectivity ${hssrc} ${hsdst} ${tid} + log_test $? 0 "Hosts connectivity: hs-${hssrc} -> hs-${hsdst} (tenant ${tid})" +} + +host_tests() +{ + log_section "SRv6 VPN connectivity test among hosts in the same tenant" + + check_and_log_hs_connectivity 1 2 100 + check_and_log_hs_connectivity 2 1 100 +} + +router_netfilter_tests() +{ + log_section "SRv6 VPN connectivity test with netfilter enabled in routers" + setup_rt_netfilter 1 + setup_rt_netfilter 2 + + check_and_log_hs_connectivity 1 2 100 + check_and_log_hs_connectivity 2 1 100 +} + +if [ "$(id -u)" -ne 0 ];then + echo "SKIP: Need root privileges" + exit $ksft_skip +fi + +if [ ! -x "$(command -v ip)" ]; then + echo "SKIP: Could not run test without ip tool" + exit $ksft_skip +fi + +cleanup &>/dev/null + +setup + +host_tests +router_netfilter_tests + +print_log_test_results + +cleanup &>/dev/null + +exit ${ret} diff --git a/tools/testing/selftests/net/udpgro.sh b/tools/testing/selftests/net/udpgro.sh index 8802604148..11a1ebda56 100755 --- a/tools/testing/selftests/net/udpgro.sh +++ b/tools/testing/selftests/net/udpgro.sh @@ -7,7 +7,7 @@ source net_helper.sh readonly PEER_NS="ns-peer-$(mktemp -u XXXXXX)" -BPF_FILE="xdp_dummy.o" +BPF_FILE="xdp_dummy.bpf.o" # set global exit status, but never reset nonzero one. check_err() diff --git a/tools/testing/selftests/net/udpgro_bench.sh b/tools/testing/selftests/net/udpgro_bench.sh index 7080eae531..c51ea90a13 100755 --- a/tools/testing/selftests/net/udpgro_bench.sh +++ b/tools/testing/selftests/net/udpgro_bench.sh @@ -7,7 +7,7 @@ source net_helper.sh readonly PEER_NS="ns-peer-$(mktemp -u XXXXXX)" -BPF_FILE="xdp_dummy.o" +BPF_FILE="xdp_dummy.bpf.o" cleanup() { local -r jobs="$(jobs -p)" diff --git a/tools/testing/selftests/net/udpgro_frglist.sh b/tools/testing/selftests/net/udpgro_frglist.sh index e1ff645bd3..17404f49cd 100755 --- a/tools/testing/selftests/net/udpgro_frglist.sh +++ b/tools/testing/selftests/net/udpgro_frglist.sh @@ -7,7 +7,7 @@ source net_helper.sh readonly PEER_NS="ns-peer-$(mktemp -u XXXXXX)" -BPF_FILE="xdp_dummy.o" +BPF_FILE="xdp_dummy.bpf.o" cleanup() { local -r jobs="$(jobs -p)" @@ -42,8 +42,8 @@ run_one() { ip -n "${PEER_NS}" link set veth1 xdp object ${BPF_FILE} section xdp tc -n "${PEER_NS}" qdisc add dev veth1 clsact - tc -n "${PEER_NS}" filter add dev veth1 ingress prio 4 protocol ipv6 bpf object-file nat6to4.o section schedcls/ingress6/nat_6 direct-action - tc -n "${PEER_NS}" filter add dev veth1 egress prio 4 protocol ip bpf object-file nat6to4.o section schedcls/egress4/snat4 direct-action + tc -n "${PEER_NS}" filter add dev veth1 ingress prio 4 protocol ipv6 bpf object-file nat6to4.bpf.o section schedcls/ingress6/nat_6 direct-action + tc -n "${PEER_NS}" filter add dev veth1 egress prio 4 protocol ip bpf object-file nat6to4.bpf.o section schedcls/egress4/snat4 direct-action echo ${rx_args} ip netns exec "${PEER_NS}" ./udpgso_bench_rx ${rx_args} -r & @@ -89,7 +89,7 @@ if [ ! -f ${BPF_FILE} ]; then exit -1 fi -if [ ! -f nat6to4.o ]; then +if [ ! -f nat6to4.bpf.o ]; then echo "Missing nat6to4 helper. Run 'make' first" exit -1 fi diff --git a/tools/testing/selftests/net/udpgro_fwd.sh b/tools/testing/selftests/net/udpgro_fwd.sh index 83ed987cff..550d8eb3e2 100755 --- a/tools/testing/selftests/net/udpgro_fwd.sh +++ b/tools/testing/selftests/net/udpgro_fwd.sh @@ -3,7 +3,7 @@ source net_helper.sh -BPF_FILE="xdp_dummy.o" +BPF_FILE="xdp_dummy.bpf.o" readonly BASE="ns-$(mktemp -u XXXXXX)" readonly SRC=2 readonly DST=1 diff --git a/tools/testing/selftests/net/veth.sh b/tools/testing/selftests/net/veth.sh index 3a394b43e2..4f1edbafb9 100755 --- a/tools/testing/selftests/net/veth.sh +++ b/tools/testing/selftests/net/veth.sh @@ -1,7 +1,7 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 -BPF_FILE="xdp_dummy.o" +BPF_FILE="xdp_dummy.bpf.o" readonly STATS="$(mktemp -p /tmp ns-XXXXXX)" readonly BASE=`basename $STATS` readonly SRC=2 diff --git a/tools/testing/selftests/net/xdp_dummy.c b/tools/testing/selftests/net/xdp_dummy.bpf.c index d988b2e0ce..d988b2e0ce 100644 --- a/tools/testing/selftests/net/xdp_dummy.c +++ b/tools/testing/selftests/net/xdp_dummy.bpf.c diff --git a/tools/testing/selftests/net/xfrm_policy.sh b/tools/testing/selftests/net/xfrm_policy.sh index 4577895306..3eeeeffb40 100755 --- a/tools/testing/selftests/net/xfrm_policy.sh +++ b/tools/testing/selftests/net/xfrm_policy.sh @@ -293,7 +293,7 @@ check_random_order() local ns=$1 local log=$2 - for i in $(seq 100); do + for i in $(seq 50); do ip -net $ns xfrm policy flush for j in $(seq 0 16 255 | sort -R); do ip -net $ns xfrm policy add dst $j.0.0.0/24 dir out priority 10 action allow @@ -306,7 +306,7 @@ check_random_order() done done - for i in $(seq 100); do + for i in $(seq 50); do ip -net $ns xfrm policy flush for j in $(seq 0 16 255 | sort -R); do local addr=$(printf "e000:0000:%02x00::/56" $j) |