diff options
Diffstat (limited to 'tools/thermal/tmon/tmon.8')
| -rw-r--r-- | tools/thermal/tmon/tmon.8 | 145 |
1 files changed, 145 insertions, 0 deletions
diff --git a/tools/thermal/tmon/tmon.8 b/tools/thermal/tmon/tmon.8 new file mode 100644 index 0000000000..2f122de584 --- /dev/null +++ b/tools/thermal/tmon/tmon.8 @@ -0,0 +1,145 @@ +.TH TMON 8 +# SPDX-License-Identifier: GPL-2.0 +.SH NAME +\fBtmon\fP - A monitoring and testing tool for Linux kernel thermal subsystem + +.SH SYNOPSIS +.ft B +.B tmon +.RB [ Options ] +.br +.SH DESCRIPTION +\fBtmon \fP can be used to visualize thermal relationship and +real-time thermal data; tune +and test cooling devices and sensors; collect thermal data for offline +analysis and plot. \fBtmon\fP must be run as root in order to control device +states via sysfs. +.PP +\fBFunctions\fP +.PP +.nf +1. Thermal relationships: +- show thermal zone information +- show cooling device information +- show trip point binding within each thermal zone +- show trip point and cooling device instance bindings +.PP +2. Real time data display +- show temperature of all thermal zones w.r.t. its trip points and types +- show states of all cooling devices +.PP +3. Thermal relationship learning and device tuning +- with a built-in Proportional Integral Derivative (\fBPID\fP) +controller, user can pair a cooling device to a thermal sensor for +testing the effectiveness and learn about the thermal distance between the two +- allow manual control of cooling device states and target temperature +.PP +4. Data logging in /var/tmp/tmon.log +- contains thermal configuration data, i.e. cooling device, thermal + zones, and trip points. Can be used for data collection in remote + debugging. +- log real-time thermal data into space separated format that can be + directly consumed by plotting tools such as Rscript. + +.SS Options +.PP +The \fB-c --control\fP option sets a cooling device type to control temperature +of a thermal zone +.PP +The \fB-d --daemon\fP option runs \fBtmon \fP as daemon without user interface +.PP +The \fB-g --debug\fP option allow debug messages to be stored in syslog +.PP +The \fB-h --help\fP option shows help message +.PP +The \fB-l --log\fP option write data to /var/tmp/tmon.log +.PP +The \fB-t --time-interval\fP option sets the polling interval in seconds +.PP +The \fB-T --target-temp\fP option sets the initial target temperature +.PP +The \fB-v --version\fP option shows the version of \fBtmon \fP +.PP +The \fB-z --zone\fP option sets the target therma zone instance to be controlled +.PP + +.SH FIELD DESCRIPTIONS +.nf +.PP +\fBP \fP passive cooling trip point type +\fBA \fP active cooling trip point type (fan) +\fBC \fP critical trip point type +\fBA \fP hot trip point type +\fBkp \fP proportional gain of \fBPID\fP controller +\fBki \fP integral gain of \fBPID\fP controller +\fBkd \fP derivative gain of \fBPID\fP controller + +.SH REQUIREMENT +Build depends on ncurses +.PP +Runtime depends on window size large enough to show the number of +devices found on the system. + +.PP + +.SH INTERACTIVE COMMANDS +.pp +.nf +\fBCtrl-C, q/Q\fP stops \fBtmon\fP +\fBTAB\fP shows tuning pop up panel, choose a letter to modify + +.SH EXAMPLES +Without any parameters, tmon is in monitoring only mode and refresh +screen every 1 second. +.PP +1. For monitoring only: +.nf +$ sudo ./tmon + +2. Use Processor cooling device to control thermal zone 0 at default 65C. +$ sudo ./tmon -c Processor -z 0 + +3. Use intel_powerclamp(idle injection) cooling device to control thermal zone 1 +$ sudo ./tmon -c intel_powerclamp -z 1 + +4. Turn on debug and collect data log at /var/tmp/tmon.log +$ sudo ./tmon -g -l + +For example, the log below shows PID controller was adjusting current states +for all cooling devices with "Processor" type such that thermal zone 0 +can stay below 65 dC. + +#---------- THERMAL DATA LOG STARTED ----------- +Samples TargetTemp acpitz0 acpitz1 Fan0 Fan1 Fan2 Fan3 Fan4 Fan5 +Fan6 Fan7 Fan8 Fan9 Processor10 Processor11 Processor12 Processor13 +LCD14 intel_powerclamp15 1 65.0 65 65 0 0 0 0 0 0 0 0 0 0 0 0 0 0 6 0 2 +65.0 66 65 0 0 0 0 0 0 0 0 0 0 4 4 4 4 6 0 3 65.0 60 54 0 0 0 0 0 0 0 0 +0 0 4 4 4 4 6 0 4 65.0 53 53 0 0 0 0 0 0 0 0 0 0 4 4 4 4 6 0 +5 65.0 52 52 0 0 0 0 0 0 0 0 0 0 0 0 0 0 6 0 +6 65.0 53 65 0 0 0 0 0 0 0 0 0 0 0 0 0 0 6 0 +7 65.0 68 70 0 0 0 0 0 0 0 0 0 0 0 0 0 0 6 0 +8 65.0 68 68 0 0 0 0 0 0 0 0 0 0 5 5 5 5 6 0 +9 65.0 68 68 0 0 0 0 0 0 0 0 0 0 6 6 6 6 6 0 +10 65.0 67 67 0 0 0 0 0 0 0 0 0 0 7 7 7 7 6 0 +11 65.0 67 67 0 0 0 0 0 0 0 0 0 0 8 8 8 8 6 0 +12 65.0 67 67 0 0 0 0 0 0 0 0 0 0 8 8 8 8 6 0 +13 65.0 67 67 0 0 0 0 0 0 0 0 0 0 9 9 9 9 6 0 +14 65.0 66 66 0 0 0 0 0 0 0 0 0 0 10 10 10 10 6 0 +15 65.0 66 67 0 0 0 0 0 0 0 0 0 0 10 10 10 10 6 0 +16 65.0 66 66 0 0 0 0 0 0 0 0 0 0 11 11 11 11 6 0 +17 65.0 66 66 0 0 0 0 0 0 0 0 0 0 11 11 11 11 6 0 +18 65.0 64 61 0 0 0 0 0 0 0 0 0 0 11 11 11 11 6 0 +19 65.0 60 59 0 0 0 0 0 0 0 0 0 0 12 12 12 12 6 0 + +Data can be read directly into an array by an example R-script below: + +#!/usr/bin/Rscript +tdata <- read.table("/var/tmp/tmon.log", header=T, comment.char="#") +attach(tdata) +jpeg("tmon.jpg") +X11() +g_range <- range(0, intel_powerclamp15, TargetTemp, acpitz0) +plot( Samples, intel_powerclamp15, col="blue", ylim=g_range, axes=FALSE, ann=FALSE) +par(new=TRUE) +lines(TargetTemp, type="o", pch=22, lty=2, col="red") +dev.off() |