blob: 5fb54375aeb6615f204fcec5e795c9df0c1b7e94 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
maintainers:
- Jagan Teki <jagan@amarulasolutions.com>
description: |
ICN6211 is MIPI-DSI to RGB Converter bridge from chipone.
It has a flexible configuration of MIPI DSI signal input and
produce RGB565, RGB666, RGB888 output format.
properties:
compatible:
enum:
- chipone,icn6211
reg:
maxItems: 1
description: virtual channel number of a DSI peripheral
clock-names:
const: refclk
clocks:
maxItems: 1
description: |
Optional external clock connected to REF_CLK input.
The clock rate must be in 10..154 MHz range.
enable-gpios:
description: Bridge EN pin, chip is reset when EN is low.
vdd1-supply:
description: A 1.8V/2.5V/3.3V supply that power the MIPI RX.
vdd2-supply:
description: A 1.8V/2.5V/3.3V supply that power the PLL.
vdd3-supply:
description: A 1.8V/2.5V/3.3V supply that power the RGB output.
ports:
$ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description:
Video port for MIPI DSI input
properties:
endpoint:
$ref: /schemas/media/video-interfaces.yaml#
unevaluatedProperties: false
properties:
data-lanes:
description: array of physical DSI data lane indexes.
minItems: 1
items:
- const: 1
- const: 2
- const: 3
- const: 4
port@1:
$ref: /schemas/graph.yaml#/properties/port
description:
Video port for MIPI DPI output (panel or connector).
required:
- port@1
required:
- compatible
- reg
- enable-gpios
- ports
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
dsi {
#address-cells = <1>;
#size-cells = <0>;
bridge@0 {
compatible = "chipone,icn6211";
reg = <0>;
enable-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* LCD-RST: PL5 */
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
bridge_in_dsi: endpoint {
remote-endpoint = <&dsi_out_bridge>;
};
};
port@1 {
reg = <1>;
bridge_out_panel: endpoint {
remote-endpoint = <&panel_out_bridge>;
};
};
};
};
};
|
