blob: 4c5dd8ec2951b1836c01a399ca82f81fb145ad69 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
|
# SPDX-License-Identifier: GPL-2.0-only
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/bridge/ti,tfp410.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: TFP410 DPI to DVI encoder
maintainers:
- Tomi Valkeinen <tomi.valkeinen@ti.com>
- Jyri Sarha <jsarha@ti.com>
properties:
compatible:
const: ti,tfp410
reg:
description: I2C address of the device.
maxItems: 1
powerdown-gpios:
maxItems: 1
ti,deskew:
description:
Data de-skew value in 350ps increments, from 0 to 7, as configured
through the DK[3:1] pins. The de-skew multiplier is computed as
(DK[3:1] - 4), so it ranges from -4 to 3.
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 7
ports:
$ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description: DPI input port.
properties:
endpoint:
$ref: /schemas/graph.yaml#/$defs/endpoint-base
unevaluatedProperties: false
properties:
pclk-sample:
description:
Endpoint sampling edge.
enum:
- 0 # Falling edge
- 1 # Rising edge
default: 0
bus-width:
description:
Endpoint bus width.
enum:
- 12 # 12 data lines connected and dual-edge mode
- 24 # 24 data lines connected and single-edge mode
default: 24
port@1:
$ref: /schemas/graph.yaml#/properties/port
description: DVI output port.
required:
- port@0
- port@1
required:
- compatible
- ports
if:
required:
- reg
then:
properties:
ti,deskew: false
else:
required:
- ti,deskew
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
tfp410: encoder {
compatible = "ti,tfp410";
powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
ti,deskew = <3>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
tfp410_in: endpoint {
pclk-sample = <1>;
bus-width = <24>;
remote-endpoint = <&dpi_out>;
};
};
port@1 {
reg = <1>;
tfp410_out: endpoint {
remote-endpoint = <&dvi_connector_in>;
};
};
};
};
...
|