1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
|
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/adc/adi,ad7780.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Analog Devices AD7170/AD7171/AD7780/AD7781 analog to digital converters
maintainers:
- Michael Hennerich <michael.hennerich@analog.com>
description: |
The ad7780 is a sigma-delta analog to digital converter. This driver provides
reading voltage values and status bits from both the ad778x and ad717x series.
Its interface also allows writing on the FILTER and GAIN GPIO pins on the
ad778x.
Specifications on the converters can be found at:
AD7170:
https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf
AD7171:
https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf
AD7780:
https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf
AD7781:
https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf
properties:
compatible:
enum:
- adi,ad7170
- adi,ad7171
- adi,ad7780
- adi,ad7781
reg:
maxItems: 1
avdd-supply:
description:
The regulator supply for the ADC reference voltage.
powerdown-gpios:
description:
Must be the device tree identifier of the PDRST pin. If
specified, it will be asserted during driver probe. As the
line is active high, it should be marked GPIO_ACTIVE_HIGH.
maxItems: 1
adi,gain-gpios:
description:
Must be the device tree identifier of the GAIN pin. Only for
the ad778x chips. If specified, it will be asserted during
driver probe. As the line is active low, it should be marked
GPIO_ACTIVE_LOW.
maxItems: 1
adi,filter-gpios:
description:
Must be the device tree identifier of the FILTER pin. Only
for the ad778x chips. If specified, it will be asserted
during driver probe. As the line is active low, it should be
marked GPIO_ACTIVE_LOW.
maxItems: 1
required:
- compatible
- reg
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
spi {
#address-cells = <1>;
#size-cells = <0>;
adc@0 {
compatible = "adi,ad7780";
reg = <0>;
avdd-supply = <&vdd_supply>;
powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
};
};
|
