1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/adc/microchip,pac1934.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Microchip PAC1934 Power Monitors with Accumulator
maintainers:
- Marius Cristea <marius.cristea@microchip.com>
description: |
This device is part of the Microchip family of Power Monitors with
Accumulator.
The datasheet for PAC1931, PAC1932, PAC1933 and PAC1934 can be found here:
https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/PAC1931-Family-Data-Sheet-DS20005850E.pdf
properties:
compatible:
enum:
- microchip,pac1931
- microchip,pac1932
- microchip,pac1933
- microchip,pac1934
reg:
maxItems: 1
"#address-cells":
const: 1
"#size-cells":
const: 0
interrupts:
maxItems: 1
slow-io-gpios:
description:
A GPIO used to trigger a change is sampling rate (lowering the chip power
consumption). If configured in SLOW mode, if this pin is forced high,
sampling rate is forced to eight samples/second. When it is forced low,
the sampling rate is 1024 samples/second unless a different sample rate
has been programmed.
patternProperties:
"^channel@[1-4]+$":
type: object
$ref: adc.yaml
description:
Represents the external channels which are connected to the ADC.
properties:
reg:
items:
minimum: 1
maximum: 4
shunt-resistor-micro-ohms:
description:
Value in micro Ohms of the shunt resistor connected between
the SENSE+ and SENSE- inputs, across which the current is measured.
Value is needed to compute the scaling of the measured current.
required:
- reg
- shunt-resistor-micro-ohms
unevaluatedProperties: false
required:
- compatible
- reg
- "#address-cells"
- "#size-cells"
additionalProperties: false
examples:
- |
i2c {
#address-cells = <1>;
#size-cells = <0>;
power-monitor@10 {
compatible = "microchip,pac1934";
reg = <0x10>;
#address-cells = <1>;
#size-cells = <0>;
channel@1 {
reg = <0x1>;
shunt-resistor-micro-ohms = <24900000>;
label = "CPU";
};
channel@2 {
reg = <0x2>;
shunt-resistor-micro-ohms = <49900000>;
label = "GPU";
};
channel@3 {
reg = <0x3>;
shunt-resistor-micro-ohms = <75000000>;
label = "MEM";
bipolar;
};
channel@4 {
reg = <0x4>;
shunt-resistor-micro-ohms = <100000000>;
label = "NET";
bipolar;
};
};
};
...
|
