1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/dac/adi,ad5758.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Analog Devices AD5758 DAC
maintainers:
- Michael Hennerich <Michael.Hennerich@analog.com>
properties:
compatible:
const: adi,ad5758
reg:
maxItems: 1
spi-cpha: true
adi,dc-dc-mode:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 2, 3]
description: |
Mode of operation of the dc-to-dc converter
Dynamic Power Control (DPC)
In this mode, the AD5758 circuitry senses the output voltage and
dynamically regulates the supply voltage, VDPC+, to meet compliance
requirements plus an optimized headroom voltage for the output buffer.
Programmable Power Control (PPC)
In this mode, the VDPC+ voltage is user-programmable to a fixed level
that needs to accommodate the maximum output load required.
The output of the DAC core is either converted to a current or
voltage output at the VIOUT pin. Only one mode can be enabled at
any one time.
The following values are currently supported:
* 1: DPC current mode
* 2: DPC voltage mode
* 3: PPC current mode
Depending on the selected output mode (voltage or current) one of the
two properties must be present:
adi,range-microvolt:
description: |
Voltage output range specified as <minimum, maximum>
oneOf:
- items:
- const: 0
- enum: [5000000, 10000000]
- items:
- const: -5000000
- const: 5000000
- items:
- const: -10000000
- const: 10000000
adi,range-microamp:
description: |
Current output range specified as <minimum, maximum>
oneOf:
- items:
- const: 0
- enum: [20000, 24000]
- items:
- const: 4
- const: 24000
- items:
- const: -20000
- const: 20000
- items:
- const: -24000
- const: 24000
- items:
- const: -1000
- const: 22000
reset-gpios:
maxItems: 1
adi,dc-dc-ilim-microamp:
enum: [150000, 200000, 250000, 300000, 350000, 400000]
description: |
The dc-to-dc converter current limit.
adi,slew-time-us:
description: |
The time it takes for the output to reach the full scale [uS]
minimum: 133
maximum: 1023984375
required:
- compatible
- reg
- spi-cpha
- adi,dc-dc-mode
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
adi,dc-dc-mode:
enum: [1, 3]
then:
properties:
adi,range-microvolt: false
required:
- adi,range-microamp
else:
properties:
adi,range-microamp: false
required:
- adi,range-microvolt
unevaluatedProperties: false
examples:
- |
spi {
#address-cells = <1>;
#size-cells = <0>;
dac@0 {
compatible = "adi,ad5758";
reg = <0>;
spi-max-frequency = <1000000>;
spi-cpha;
reset-gpios = <&gpio 22 0>;
adi,dc-dc-mode = <2>;
adi,range-microvolt = <0 10000000>;
adi,dc-dc-ilim-microamp = <200000>;
adi,slew-time-us = <125000>;
};
};
...
|
