1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/frequency/adi,adf4350.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Analog Devices ADF4350/ADF4351 wideband synthesizer
maintainers:
- Michael Hennerich <michael.hennerich@analog.com>
properties:
compatible:
enum:
- adi,adf4350
- adi,adf4351
reg:
maxItems: 1
spi-max-frequency:
maximum: 20000000
clocks:
maxItems: 1
description: Clock to provide CLKIN reference clock signal.
clock-names:
const: clkin
gpios:
maxItems: 1
description: Lock detect GPIO.
adi,channel-spacing:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Channel spacing in Hz (influences MODULUS).
adi,power-up-frequency:
$ref: /schemas/types.yaml#/definitions/uint32
description:
If set the PLL tunes to this frequency (in Hz) on driver probe.
adi,reference-div-factor:
$ref: /schemas/types.yaml#/definitions/uint32
description:
If set the driver skips dynamic calculation and uses this default
value instead.
adi,reference-doubler-enable:
$ref: /schemas/types.yaml#/definitions/flag
description: Enables reference doubler.
adi,reference-div2-enable:
$ref: /schemas/types.yaml#/definitions/flag
description: Enables reference divider.
adi,phase-detector-polarity-positive-enable:
$ref: /schemas/types.yaml#/definitions/flag
description: Enables positive phase detector polarity. Default negative.
adi,lock-detect-precision-6ns-enable:
$ref: /schemas/types.yaml#/definitions/flag
description: Enables 6ns lock detect precision. Default = 10ns.
adi,lock-detect-function-integer-n-enable:
$ref: /schemas/types.yaml#/definitions/flag
description:
Enables lock detect for integer-N mode. Default = factional-N mode.
adi,charge-pump-current:
$ref: /schemas/types.yaml#/definitions/uint32
description: Charge pump current in mA. Default = 2500mA.
adi,muxout-select:
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 6
description: |
On chip multiplexer output selection.
Valid values for the multiplexer output are:
0: Three-State Output (default)
1: DVDD
2: DGND
3: R-Counter output
4: N-Divider output
5: Analog lock detect
6: Digital lock detect
adi,low-spur-mode-enable:
$ref: /schemas/types.yaml#/definitions/flag
description: Enables low spur mode. Default = Low noise mode.
adi,cycle-slip-reduction-enable:
$ref: /schemas/types.yaml#/definitions/flag
description: Enables cycle slip reduction.
adi,charge-cancellation-enable:
$ref: /schemas/types.yaml#/definitions/flag
description:
Enabled charge pump charge cancellation for integer-N modes.
adi,anti-backlash-3ns-enable:
$ref: /schemas/types.yaml#/definitions/flag
description:
Enables 3ns antibacklash pulse width for integer-N modes.
adi,band-select-clock-mode-high-enable:
$ref: /schemas/types.yaml#/definitions/flag
description: Enables faster band selection logic.
adi,12bit-clk-divider:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Clock divider value used when adi,12bit-clkdiv-mode != 0
adi,clk-divider-mode:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2]
description: |
Valid values for the clkdiv mode are:
0: Clock divider off (default)
1: Fast lock enable
2: Phase resync enable
adi,aux-output-enable:
$ref: /schemas/types.yaml#/definitions/flag
description: Enables auxiliary RF output.
adi,aux-output-fundamental-enable:
$ref: /schemas/types.yaml#/definitions/flag
description: |
Selects fundamental VCO output on the auxiliary RF output.
Default = Output of RF dividers.
adi,mute-till-lock-enable:
$ref: /schemas/types.yaml#/definitions/flag
description: Enables Mute-Till-Lock-Detect function.
adi,output-power:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
description: |
Output power selection.
Valid values for the power mode are:
0: -4dBm (default)
1: -1dBm
2: +2dBm
3: +5dBm
adi,aux-output-power:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
description: |
Auxiliary output power selection.
Valid values for the power mode are:
0: -4dBm (default)
1: -1dBm
2: +2dBm
3: +5dBm
required:
- compatible
- reg
- clocks
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
spi {
#address-cells = <1>;
#size-cells = <0>;
pll@4 {
compatible = "adi,adf4351";
reg = <4>;
spi-max-frequency = <10000000>;
clocks = <&clk0_ad9523 9>;
clock-names = "clkin";
adi,channel-spacing = <10000>;
adi,power-up-frequency = <2400000000>;
adi,phase-detector-polarity-positive-enable;
adi,charge-pump-current = <2500>;
adi,output-power = <3>;
adi,mute-till-lock-enable;
};
};
...
|
