blob: 358cb8275bf1879b2fc616296a09dc0ad069dc2c (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/input/goodix,gt7375p.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Goodix GT7375P touchscreen
maintainers:
- Douglas Anderson <dianders@chromium.org>
description:
Supports the Goodix GT7375P touchscreen.
This touchscreen uses the i2c-hid protocol but has some non-standard
power sequencing required.
allOf:
- $ref: /schemas/input/touchscreen/touchscreen.yaml#
properties:
compatible:
oneOf:
- const: goodix,gt7375p
- items:
- const: goodix,gt7986u
- const: goodix,gt7375p
reg:
enum:
- 0x5d
- 0x14
interrupts:
maxItems: 1
panel: true
reset-gpios:
true
vdd-supply:
description: The 3.3V supply to the touchscreen.
mainboard-vddio-supply:
description:
The supply on the main board needed to power up IO signals going
to the touchscreen. This supply need not go to the touchscreen
itself as long as it allows the main board to make signals compatible
with what the touchscreen is expecting for its IO rails.
goodix,no-reset-during-suspend:
description:
Set this to true to enforce the driver to not assert the reset GPIO
during suspend.
Due to potential touchscreen hardware flaw, back-powering could happen in
suspend if the power supply is on and with active-low reset GPIO asserted.
This property is used to avoid the back-powering issue.
type: boolean
required:
- compatible
- reg
- interrupts
- reset-gpios
- vdd-supply
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
ap_ts: touchscreen@5d {
compatible = "goodix,gt7375p";
reg = <0x5d>;
interrupt-parent = <&tlmm>;
interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
vdd-supply = <&pp3300_ts>;
};
};
|
