1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/input/ti,drv260x.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments - drv260x Haptics driver family
maintainers:
- Andrew Davis <afd@ti.com>
properties:
compatible:
enum:
- ti,drv2604
- ti,drv2605
- ti,drv2605l
reg:
maxItems: 1
vbat-supply:
description: Power supply to the haptic motor
# TODO: Deprecate 'mode' in favor of differently named property
mode:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Power up mode of the chip
(defined in include/dt-bindings/input/ti-drv260x.h)
DRV260X_LRA_MODE
Linear Resonance Actuator mode (Piezoelectric)
DRV260X_LRA_NO_CAL_MODE
This is a LRA Mode but there is no calibration sequence during init.
And the device is configured for real time playback mode (RTP mode).
DRV260X_ERM_MODE
Eccentric Rotating Mass mode (Rotary vibrator)
enum: [ 0, 1, 2 ]
library-sel:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
These are ROM based waveforms pre-programmed into the IC.
This should be set to set the library to use at power up.
(defined in include/dt-bindings/input/ti-drv260x.h)
DRV260X_LIB_EMPTY - Do not use a pre-programmed library
DRV260X_ERM_LIB_A - Pre-programmed Library
DRV260X_ERM_LIB_B - Pre-programmed Library
DRV260X_ERM_LIB_C - Pre-programmed Library
DRV260X_ERM_LIB_D - Pre-programmed Library
DRV260X_ERM_LIB_E - Pre-programmed Library
DRV260X_ERM_LIB_F - Pre-programmed Library
DRV260X_LIB_LRA - Pre-programmed LRA Library
enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
enable-gpio:
maxItems: 1
deprecated: true
enable-gpios:
maxItems: 1
vib-rated-mv:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
The rated voltage of the actuator in millivolts.
If this is not set then the value will be defaulted to 3200 mV.
default: 3200
vib-overdrive-mv:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
The overdrive voltage of the actuator in millivolts.
If this is not set then the value will be defaulted to 3200 mV.
default: 3200
required:
- compatible
- reg
- enable-gpios
- mode
- library-sel
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/ti-drv260x.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
haptics@5a {
compatible = "ti,drv2605l";
reg = <0x5a>;
vbat-supply = <&vbat>;
enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
mode = <DRV260X_LRA_MODE>;
library-sel = <DRV260X_LIB_LRA>;
vib-rated-mv = <3200>;
vib-overdrive-mv = <3200>;
};
};
|
