1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
|
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/leds/maxim,max77693.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Maxim MAX77693 MicroUSB and Companion Power Management IC LEDs
maintainers:
- Krzysztof Kozlowski <krzk@kernel.org>
description: |
This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated
Circuit (MUIC).
There are two LED outputs available - FLED1 and FLED2. Each of them can
control a separate LED or they can be connected together to double the
maximum current for a single connected LED. One LED is represented by one
child node.
See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for
additional information and example.
properties:
compatible:
const: maxim,max77693-led
maxim,boost-mode:
description:
In boost mode the device can produce up to 1.2A of total current on both
outputs. The maximum current on each output is reduced to 625mA then. If
not enabled explicitly, boost setting defaults to LEDS_BOOST_FIXED in
case both current sources are used.
See LEDS_BOOST_* in include/dt-bindings/leds/common.h.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2]
maxim,boost-mvout:
description: |
Output voltage of the boost module in millivolts.
Valid values: 3300 - 5500, step by 25 (rounded down)
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 3300
maximum: 5500
default: 3300
maxim,mvsys-min:
description: |
Low input voltage level in millivolts. Flash is not fired if chip
estimates that system voltage could drop below this level due to flash
power consumption.
Valid values: 2400 - 3400, step by 33 (rounded down)
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 2400
maximum: 3400
default: 2400
patternProperties:
"^([a-z]+-)?led[01]?$":
type: object
$ref: common.yaml#
unevaluatedProperties: false
properties:
led-sources:
allOf:
- minItems: 1
maxItems: 2
items:
minimum: 0
maximum: 1
led-max-microamp:
description: |
Valid values for a LED connected to one FLED output:
15625 - 250000, step by 15625 (rounded down)
Valid values for a LED connected to both FLED outputs:
15625 - 500000, step by 15625 (rounded down)
flash-max-microamp:
description: |
Valid values for a single LED connected to one FLED output
(boost mode must be turned off):
15625 - 1000000, step by 15625 (rounded down)
Valid values for a single LED connected to both FLED outputs:
15625 - 1250000, step by 15625 (rounded down)
Valid values for two LEDs case:
15625 - 625000, step by 15625 (rounded down)
flash-max-timeout-us:
description: |
Valid values: 62500 - 1000000, step by 62500 (rounded down)
minimum: 62500
maximum: 1000000
required:
- flash-max-microamp
- flash-max-timeout-us
- led-max-microamp
- led-sources
required:
- compatible
additionalProperties: false
|
