1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/i2c/ti,ds90ub960.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments DS90UB9XX Family FPD-Link Deserializer Hubs
maintainers:
- Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
description:
The TI DS90UB9XX devices are FPD-Link video deserializers with I2C and GPIO
forwarding.
allOf:
- $ref: /schemas/i2c/i2c-atr.yaml#
properties:
compatible:
enum:
- ti,ds90ub960-q1
- ti,ds90ub9702-q1
reg:
maxItems: 1
clocks:
maxItems: 1
description:
Reference clock connected to the REFCLK pin.
clock-names:
items:
- const: refclk
powerdown-gpios:
maxItems: 1
description:
Specifier for the GPIO connected to the PDB pin.
i2c-alias-pool:
minItems: 1
maxItems: 32
links:
type: object
additionalProperties: false
properties:
'#address-cells':
const: 1
'#size-cells':
const: 0
ti,manual-strobe:
type: boolean
description:
Enable manual strobe position and EQ level
patternProperties:
'^link@[0-3]$':
type: object
additionalProperties: false
properties:
reg:
description: The link number
maxItems: 1
i2c-alias:
$ref: /schemas/types.yaml#/definitions/uint32
description:
The I2C address used for the serializer. Transactions to this
address on the I2C bus where the deserializer resides are
forwarded to the serializer.
ti,rx-mode:
$ref: /schemas/types.yaml#/definitions/uint32
enum:
- 0 # RAW10
- 1 # RAW12 HF
- 2 # RAW12 LF
- 3 # CSI2 SYNC
- 4 # CSI2 NON-SYNC
description:
FPD-Link Input Mode. This should reflect the hardware and the
default mode of the connected device.
ti,cdr-mode:
$ref: /schemas/types.yaml#/definitions/uint32
enum:
- 0 # FPD-Link III
- 1 # FPD-Link IV
description:
FPD-Link CDR Mode. This should reflect the hardware and the
default mode of the connected device.
ti,strobe-pos:
$ref: /schemas/types.yaml#/definitions/int32
minimum: -13
maximum: 13
description: Manual strobe position
ti,eq-level:
$ref: /schemas/types.yaml#/definitions/uint32
maximum: 14
description: Manual EQ level
serializer:
type: object
description: FPD-Link Serializer node
required:
- reg
- i2c-alias
- ti,rx-mode
- serializer
ports:
$ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description: FPD-Link input 0
properties:
endpoint:
$ref: /schemas/media/video-interfaces.yaml#
unevaluatedProperties: false
description:
Endpoint for FPD-Link port. If the RX mode for this port is RAW,
hsync-active and vsync-active must be defined.
port@1:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description: FPD-Link input 1
properties:
endpoint:
$ref: /schemas/media/video-interfaces.yaml#
unevaluatedProperties: false
description:
Endpoint for FPD-Link port. If the RX mode for this port is RAW,
hsync-active and vsync-active must be defined.
port@2:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description: FPD-Link input 2
properties:
endpoint:
$ref: /schemas/media/video-interfaces.yaml#
unevaluatedProperties: false
description:
Endpoint for FPD-Link port. If the RX mode for this port is RAW,
hsync-active and vsync-active must be defined.
port@3:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description: FPD-Link input 3
properties:
endpoint:
$ref: /schemas/media/video-interfaces.yaml#
unevaluatedProperties: false
description:
Endpoint for FPD-Link port. If the RX mode for this port is RAW,
hsync-active and vsync-active must be defined.
port@4:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description: CSI-2 Output 0
properties:
endpoint:
$ref: /schemas/media/video-interfaces.yaml#
unevaluatedProperties: false
properties:
data-lanes:
minItems: 1
maxItems: 4
link-frequencies:
maxItems: 1
required:
- data-lanes
- link-frequencies
port@5:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description: CSI-2 Output 1
properties:
endpoint:
$ref: /schemas/media/video-interfaces.yaml#
unevaluatedProperties: false
properties:
data-lanes:
minItems: 1
maxItems: 4
link-frequencies:
maxItems: 1
required:
- data-lanes
- link-frequencies
required:
- port@0
- port@1
- port@2
- port@3
- port@4
- port@5
required:
- compatible
- reg
- clocks
- clock-names
- ports
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
i2c {
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;
deser@3d {
compatible = "ti,ds90ub960-q1";
reg = <0x3d>;
clock-names = "refclk";
clocks = <&fixed_clock>;
powerdown-gpios = <&pca9555 7 GPIO_ACTIVE_LOW>;
i2c-alias-pool = <0x4a 0x4b 0x4c 0x4d 0x4e 0x4f>;
ports {
#address-cells = <1>;
#size-cells = <0>;
/* Port 0, Camera 0 */
port@0 {
reg = <0>;
ub960_fpd3_1_in: endpoint {
remote-endpoint = <&ub953_1_out>;
};
};
/* Port 1, Camera 1 */
port@1 {
reg = <1>;
ub960_fpd3_2_in: endpoint {
remote-endpoint = <&ub913_2_out>;
hsync-active = <0>;
vsync-active = <1>;
};
};
/* Port 2, unconnected */
port@2 {
reg = <2>;
};
/* Port 3, unconnected */
port@3 {
reg = <3>;
};
/* Port 4, CSI-2 TX */
port@4 {
reg = <4>;
ds90ub960_0_csi_out: endpoint {
data-lanes = <1 2 3 4>;
link-frequencies = /bits/ 64 <800000000>;
remote-endpoint = <&csi2_phy0>;
};
};
/* Port 5, unconnected */
port@5 {
reg = <5>;
};
};
links {
#address-cells = <1>;
#size-cells = <0>;
/* Link 0 has DS90UB953 serializer and IMX274 sensor */
link@0 {
reg = <0>;
i2c-alias = <0x44>;
ti,rx-mode = <3>;
serializer1: serializer {
compatible = "ti,ds90ub953-q1";
gpio-controller;
#gpio-cells = <2>;
#clock-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
ub953_1_in: endpoint {
data-lanes = <1 2 3 4>;
remote-endpoint = <&sensor_1_out>;
};
};
port@1 {
reg = <1>;
ub953_1_out: endpoint {
remote-endpoint = <&ub960_fpd3_1_in>;
};
};
};
i2c {
#address-cells = <1>;
#size-cells = <0>;
sensor@1a {
compatible = "sony,imx274";
reg = <0x1a>;
reset-gpios = <&serializer1 0 GPIO_ACTIVE_LOW>;
port {
sensor_1_out: endpoint {
remote-endpoint = <&ub953_1_in>;
};
};
};
};
};
}; /* End of link@0 */
/* Link 1 has DS90UB913 serializer and MT9V111 sensor */
link@1 {
reg = <1>;
i2c-alias = <0x45>;
ti,rx-mode = <0>;
serializer2: serializer {
compatible = "ti,ds90ub913a-q1";
gpio-controller;
#gpio-cells = <2>;
clocks = <&clk_cam_48M>;
clock-names = "clkin";
#clock-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
ub913_2_in: endpoint {
remote-endpoint = <&sensor_2_out>;
pclk-sample = <1>;
};
};
port@1 {
reg = <1>;
ub913_2_out: endpoint {
remote-endpoint = <&ub960_fpd3_2_in>;
};
};
};
i2c {
#address-cells = <1>;
#size-cells = <0>;
sensor@48 {
compatible = "aptina,mt9v111";
reg = <0x48>;
clocks = <&serializer2>;
port {
sensor_2_out: endpoint {
remote-endpoint = <&ub913_2_in>;
};
};
};
};
};
}; /* End of link@1 */
};
};
};
...
|
