1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright (C) 2021 Microchip Technology, Inc.
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/microchip,xisc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Microchip eXtended Image Sensor Controller (XISC)
maintainers:
- Eugen Hristev <eugen.hristev@microchip.com>
description: |
The eXtended Image Sensor Controller (XISC) device provides the video input capabilities for the
Microchip AT91 SAM family of devices.
The XISC has a single internal parallel input that supports RAW Bayer, RGB or YUV video.
The source can be either a demuxer from a CSI2 type of bus, or a simple direct bridge to a
parallel sensor.
The XISC provides one clock output that is used to clock the demuxer/bridge.
properties:
compatible:
const: microchip,sama7g5-isc
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
maxItems: 1
clock-names:
items:
- const: hclock
'#clock-cells':
const: 0
clock-output-names:
const: isc-mck
microchip,mipi-mode:
type: boolean
description:
As the XISC is usually connected to a demux/bridge, the XISC receives
the same type of input, however, it should be aware of the type of
signals received. The mipi-mode enables different internal handling
of the data and clock lines.
port:
$ref: /schemas/graph.yaml#/$defs/port-base
description:
Input port node, single endpoint describing the input pad.
properties:
endpoint:
$ref: video-interfaces.yaml#
properties:
bus-type:
enum: [5, 6]
remote-endpoint: true
bus-width:
enum: [8, 9, 10, 11, 12, 14]
default: 12
hsync-active:
enum: [0, 1]
default: 1
vsync-active:
enum: [0, 1]
default: 1
pclk-sample:
enum: [0, 1]
default: 1
required:
- remote-endpoint
- bus-type
additionalProperties: false
additionalProperties: false
required:
- compatible
- reg
- clocks
- clock-names
- '#clock-cells'
- clock-output-names
- port
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/media/video-interfaces.h>
xisc: xisc@e1408000 {
compatible = "microchip,sama7g5-isc";
reg = <0xe1408000 0x2000>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 56>;
clock-names = "hclock";
#clock-cells = <0>;
clock-output-names = "isc-mck";
port {
xisc_in: endpoint {
bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
remote-endpoint = <&csi2dc_out>;
hsync-active = <1>;
vsync-active = <1>;
bus-width = <12>;
};
};
};
|
