1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
|
# SPDX-License-Identifier: GPL-2.0-only
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/maxim,max77843.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Maxim MAX77843 MicroUSB and Companion Power Management IC
maintainers:
- Krzysztof Kozlowski <krzk@kernel.org>
description: |
This is a part of device tree bindings for Maxim MAX77843 MicroUSB
Integrated Circuit (MUIC).
The Maxim MAX77843 is a MicroUSB and Companion Power Management IC which
includes voltage current regulators, charger, fuel-gauge, haptic motor driver
and MicroUSB management IC.
properties:
compatible:
const: maxim,max77843
interrupts:
maxItems: 1
reg:
maxItems: 1
extcon:
$ref: /schemas/extcon/maxim,max77843.yaml
motor-driver:
type: object
additionalProperties: false
properties:
compatible:
const: maxim,max77843-haptic
haptic-supply:
description: Power supply to the haptic motor
pwms:
maxItems: 1
required:
- compatible
- haptic-supply
- pwms
regulators:
$ref: /schemas/regulator/maxim,max77843.yaml
required:
- compatible
- interrupts
- reg
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
pmic@66 {
compatible = "maxim,max77843";
interrupt-parent = <&gpa1>;
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
reg = <0x66>;
extcon {
compatible = "maxim,max77843-muic";
connector {
compatible = "samsung,usb-connector-11pin",
"usb-b-connector";
label = "micro-USB";
type = "micro";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
/*
* TODO: The DTS this is based on does not have
* port@0 which is a required property. The ports
* look incomplete and need fixing.
* Add a disabled port just to satisfy dtschema.
*/
reg = <0>;
status = "disabled";
};
port@3 {
reg = <3>;
endpoint {
remote-endpoint = <&mhl_to_musb_con>;
};
};
};
};
ports {
port {
endpoint {
remote-endpoint = <&usb_to_muic>;
};
};
};
};
regulators {
compatible = "maxim,max77843-regulator";
SAFEOUT1 {
regulator-name = "SAFEOUT1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <4950000>;
};
SAFEOUT2 {
regulator-name = "SAFEOUT2";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <4950000>;
};
CHARGER {
regulator-name = "CHARGER";
regulator-min-microamp = <100000>;
regulator-max-microamp = <3150000>;
};
};
motor-driver {
compatible = "maxim,max77843-haptic";
haptic-supply = <&ldo38_reg>;
pwms = <&pwm 0 33670 0>;
};
};
};
|
