1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
|
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/rohm,bd71828-pmic.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: ROHM BD71828 Power Management Integrated Circuit
maintainers:
- Matti Vaittinen <mazziesaccount@gmail.com>
description: |
BD71828GW is a single-chip power management IC for battery-powered portable
devices. The IC integrates 7 buck converters, 7 LDOs, and a 1500 mA
single-cell linear charger. Also included is a Coulomb counter, a real-time
clock (RTC), and a 32.768 kHz clock gate.
properties:
compatible:
const: rohm,bd71828
reg:
description:
I2C slave address.
maxItems: 1
interrupts:
maxItems: 1
gpio-controller: true
"#gpio-cells":
const: 2
description: |
The first cell is the pin number and the second cell is used to specify
flags. See ../gpio/gpio.txt for more information.
clocks:
maxItems: 1
"#clock-cells":
const: 0
clock-output-names:
const: bd71828-32k-out
rohm,clkout-open-drain:
description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos".
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 1
rohm,charger-sense-resistor-ohms:
minimum: 10000000
maximum: 50000000
description: |
BD71827 and BD71828 have SAR ADC for measuring charging currents.
External sense resistor (RSENSE in data sheet) should be used. If some
other but 30MOhm resistor is used the resistance value should be given
here in Ohms.
regulators:
$ref: ../regulator/rohm,bd71828-regulator.yaml
description:
List of child nodes that specify the regulators.
leds:
$ref: ../leds/rohm,bd71828-leds.yaml
gpio-reserved-ranges:
description: |
Usage of BD71828 GPIO pins can be changed via OTP. This property can be
used to mark the pins which should not be configured for GPIO. Please see
the ../gpio/gpio.txt for more information.
required:
- compatible
- reg
- interrupts
- clocks
- "#clock-cells"
- regulators
- gpio-controller
- "#gpio-cells"
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/leds/common.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
pmic: pmic@4b {
compatible = "rohm,bd71828";
reg = <0x4b>;
interrupt-parent = <&gpio1>;
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
clocks = <&osc 0>;
#clock-cells = <0>;
clock-output-names = "bd71828-32k-out";
gpio-controller;
#gpio-cells = <2>;
gpio-reserved-ranges = <0 1>, <2 1>;
rohm,charger-sense-resistor-ohms = <10000000>;
regulators {
buck1: BUCK1 {
regulator-name = "buck1";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2000000>;
regulator-ramp-delay = <2500>;
};
buck2: BUCK2 {
regulator-name = "buck2";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2000000>;
regulator-ramp-delay = <2500>;
};
buck3: BUCK3 {
regulator-name = "buck3";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <2000000>;
};
buck4: BUCK4 {
regulator-name = "buck4";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1800000>;
};
buck5: BUCK5 {
regulator-name = "buck5";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <3300000>;
};
buck6: BUCK6 {
regulator-name = "buck6";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2000000>;
regulator-ramp-delay = <2500>;
};
buck7: BUCK7 {
regulator-name = "buck7";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2000000>;
regulator-ramp-delay = <2500>;
};
ldo1: LDO1 {
regulator-name = "ldo1";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
};
ldo2: LDO2 {
regulator-name = "ldo2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
};
ldo3: LDO3 {
regulator-name = "ldo3";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
};
ldo4: LDO4 {
regulator-name = "ldo4";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
};
ldo5: LDO5 {
regulator-name = "ldo5";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
};
ldo6: LDO6 {
regulator-name = "ldo6";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo7_reg: LDO7 {
regulator-name = "ldo7";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
};
};
leds {
compatible = "rohm,bd71828-leds";
led-1 {
rohm,led-compatible = "bd71828-grnled";
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_GREEN>;
};
led-2 {
rohm,led-compatible = "bd71828-ambled";
function = LED_FUNCTION_CHARGING;
color = <LED_COLOR_ID_AMBER>;
};
};
};
};
|
