summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml
blob: 534cf03f36bbade96ed26e4dcfa7427665fba835 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/rohm,bd9571mwv.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: ROHM BD9571MWV/BD9574MWF Power Management Integrated Circuit (PMIC)

maintainers:
  - Marek Vasut <marek.vasut@gmail.com>

properties:
  compatible:
    enum:
      - rohm,bd9571mwv
      - rohm,bd9574mwf

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  interrupt-controller: true

  '#interrupt-cells':
    const: 2

  gpio-controller: true

  '#gpio-cells':
    const: 2

  rohm,ddr-backup-power:
    $ref: /schemas/types.yaml#/definitions/uint32
    minimum: 0x0
    maximum: 0xf
    description: |
      Value to use for DDR-Backup Power (default 0).
      This is a bitmask that specifies which DDR power rails need to be kept
      powered when backup mode is entered, for system suspend:
        - bit 0: DDR0
        - bit 1: DDR1
        - bit 2: DDR0C
        - bit 3: DDR1C
      These bits match the KEEPON_DDR* bits in the documentation for the "BKUP
      Mode Cnt" register.

  rohm,rstbmode-level:
    $ref: /schemas/types.yaml#/definitions/flag
    description:
      The RSTB signal is configured for level mode, to accommodate a toggle
      power switch (the RSTBMODE pin is strapped low).

  rohm,rstbmode-pulse:
    $ref: /schemas/types.yaml#/definitions/flag
    description:
      The RSTB signal is configured for pulse mode, to accommodate a momentary
      power switch (the RSTBMODE pin is strapped high).

  regulators:
    type: object
    description:
      List of child nodes that specify the regulator initialization data.
      Child nodes must be named after their hardware counterparts.

    patternProperties:
      "^(vd09|vd18|vd25|vd33|dvfs)$":
        type: object
        $ref: /schemas/regulator/regulator.yaml#

        properties:
          regulator-name:
            pattern: "^(vd09|vd18|vd25|vd33|dvfs)$"

        unevaluatedProperties: false

    additionalProperties: false

additionalProperties: false

required:
  - compatible
  - reg
  - interrupts
  - interrupt-controller
  - '#interrupt-cells'
  - gpio-controller
  - '#gpio-cells'

oneOf:
  - required:
      - rohm,rstbmode-level
  - required:
      - rohm,rstbmode-pulse

examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>

    i2c {
          #address-cells = <1>;
          #size-cells = <0>;

          pmic: pmic@30 {
                  compatible = "rohm,bd9571mwv";
                  reg = <0x30>;
                  interrupt-parent = <&gpio2>;
                  interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
                  interrupt-controller;
                  #interrupt-cells = <2>;
                  gpio-controller;
                  #gpio-cells = <2>;
                  rohm,ddr-backup-power = <0xf>;
                  rohm,rstbmode-pulse;

                  regulators {
                          dvfs: dvfs {
                                  regulator-name = "dvfs";
                                  regulator-min-microvolt = <750000>;
                                  regulator-max-microvolt = <1030000>;
                                  regulator-boot-on;
                                  regulator-always-on;
                          };
                  };
          };
    };