1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8150.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm SM8150 PCI Express Root Complex
maintainers:
- Bjorn Andersson <andersson@kernel.org>
- Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
description:
Qualcomm SM8150 SoC PCIe root complex controller is based on the Synopsys
DesignWare PCIe IP.
properties:
compatible:
const: qcom,pcie-sm8150
reg:
minItems: 5
maxItems: 6
reg-names:
minItems: 5
items:
- const: parf # Qualcomm specific registers
- const: dbi # DesignWare PCIe registers
- const: elbi # External local bus interface registers
- const: atu # ATU address space
- const: config # PCIe configuration space
- const: mhi # MHI registers
clocks:
minItems: 8
maxItems: 8
clock-names:
items:
- const: pipe # PIPE clock
- const: aux # Auxiliary clock
- const: cfg # Configuration clock
- const: bus_master # Master AXI clock
- const: bus_slave # Slave AXI clock
- const: slave_q2a # Slave Q2A clock
- const: tbu # PCIe TBU clock
- const: ref # REFERENCE clock
interrupts:
minItems: 8
maxItems: 8
interrupt-names:
items:
- const: msi0
- const: msi1
- const: msi2
- const: msi3
- const: msi4
- const: msi5
- const: msi6
- const: msi7
resets:
maxItems: 1
reset-names:
items:
- const: pci
allOf:
- $ref: qcom,pcie-common.yaml#
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/clock/qcom,gcc-sm8150.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interconnect/qcom,sm8150.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
soc {
#address-cells = <2>;
#size-cells = <2>;
pcie@1c00000 {
compatible = "qcom,pcie-sm8150";
reg = <0 0x01c00000 0 0x3000>,
<0 0x60000000 0 0xf1d>,
<0 0x60000f20 0 0xa8>,
<0 0x60001000 0 0x1000>,
<0 0x60100000 0 0x100000>;
reg-names = "parf", "dbi", "elbi", "atu", "config";
ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
<0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
bus-range = <0x00 0xff>;
device_type = "pci";
linux,pci-domain = <0>;
num-lanes = <1>;
#address-cells = <3>;
#size-cells = <2>;
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
<&gcc GCC_PCIE_0_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_0_SLV_AXI_CLK>,
<&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
<&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "pipe",
"aux",
"cfg",
"bus_master",
"bus_slave",
"slave_q2a",
"tbu",
"ref";
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0", "msi1", "msi2", "msi3",
"msi4", "msi5", "msi6", "msi7";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
iommu-map = <0x0 &apps_smmu 0x1d80 0x1>,
<0x100 &apps_smmu 0x1d81 0x1>;
phys = <&pcie0_phy>;
phy-names = "pciephy";
pinctrl-0 = <&pcie0_default_state>;
pinctrl-names = "default";
power-domains = <&gcc PCIE_0_GDSC>;
resets = <&gcc GCC_PCIE_0_BCR>;
reset-names = "pci";
perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
};
};
|
